Search Results

Search found 1282 results on 52 pages for 'justin ray'.

Page 15/52 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

  • How to maintain the log source host using logstash

    - by Ray Rodriguez
    I am following the steps in this blog to set up rsyslog + logstash + graylog2 and I can't figure out how to replace the @source_host attribute in logstash using the mutate - replace filter. In the exmaple the author replaces his @source_host with a string value but I'd like to use the actual value that is parsed from in this case a syslog. mutate { type => loc1 replace => ["@source_host", "loc1"] } mutate { type => loc2 replace => ["@source_host", "loc2"] } How do I actually maintain the original source host in my logs?

    Read the article

  • Add a small RAID card? Will it help overall stability and performance of my nine hard drives?

    - by Ray
    Hi, Will I get any extra genuine added performance and RAID stability if I insert a basic RAID card into a PCI-E x1 slot? I am considering the Adaptec 1220SA - 2 port SATA , pci-express (1x) , raid 0/1. Ok it only supports two SATA drives. Purpose is to help support the eight internal hard drives (1TB each), a DVD drive and an external e-SATA connected 2TB hard drive - by dealing with two of the internal hard drives. My current configuration of eight internal 1TB Barracuda (7200.12) SATA hard drives, one external 2TB SATA Western Digital Green Drive (e-SATA) and one DVD drive can already be supported by the Intel P55 & JMicron controllers on the ASUS motherboard : the Intel P55 (controls six HDD; configured as three x RAID 1), and the JMicron (controls two HDD as one RAID 1, as well as the DVD drive and the external SATA drive via the motherboard's e-SATA port (controlled by the JMicron)). Bigger picture details : I have an ASUS motherboard designed for the LGA1156 type processor and it includes the Intel P55 Express Chipset and JMicron. I am using the Intel Core i7-870 processor, and have 8GB DDR3 (1333) memory (four x 2GB Corsair DIMMs). Enough overall power. The power supply is more than sufficicient for the system. Corsair AX850. The system will never need the full 850 watts (future : second graphics card). The RAID card would provide hardware RAID 1 for two of the eight intrnal drives. It would either reduce the load on : the Intel P55 firmware RAID support, or replace the JMicron controller's RAID 1 set. I am busy installing the above configuration using Windows 7 Ultimate 64-bit as the OS. The RAID card is a last minute addition to the plan. Is it worth spending the extra R700 - R900 on the Adaptec 1220SA, or equivalent RAID card? I cannot afford to spend yet another R2000 - R3000 on a RAID card that would support many SATA2 hard drives, with a better RAID, example the RAID 5. My Issue & assumption : I am trusting that the Intel P55 chipset can properly handle six drives, configured as three * RAID 1. I am assuming that the JMicron can handle, using its RED SATA ports, one RAID-1 (two HDDs). The DVD drive connects to the JMicron optical SATA port 1 (white port 1). White port 2 is not used. The e-SATA connection is from the JMicron straight to, and through the motherboard - to an on-board (rear panel) e-SATA port. Am I being a little hopeful in only using the on-board Intel P55 and the JMicron? Is it a waste of money to install a RAID card that handles two SATA2 drives? OR Is it wisdom to take the pressure a little off the Intel P55? Obviously I am interested in data security, hence RAID 1, not RAID Zero. RAID 5 would be nice. The CPU, Intel Core i7-870 will provide the clout. Context to nine drives : I am using virtualisation with Windows 7 Ultimate. Bootable VMs. The operating system gets a mirror. Loaded apps gets a mirror. The current design data is kept in another mirror and Another mirror is back-up one and / or VM territory. Then the external 2TB drive (via e-SATA) is the next layer of data security and then finally, I use off-site data security. Thanks.

    Read the article

  • Accessing Virtual Host from outside LAN

    - by Ray
    I'm setting up a web development platform that makes things as easy as possible to write and test all code on my local machine, and sync this with my web server. I setup several virtual hosts so that I can access my projects by typing in "project" instead of "localhost/project" as the URL. I also want to set this up so that I can access my projects from any network. I signed up for a DYNDNS URL that points to my computer's IP address. This worked great from anywhere before I setup the virtual hosts. Now when I try to access my projects by typing in my DYNDNS URL, I get the 403 Forbidden Error message, "You don't have permission to access / on this server." To setup my virtual hosts, I edited two files - hosts in the system32/drivers/etc folder, and httpd-vhosts.conf in the Apache folder of my WAMP installation. In the hosts file, I simply added the server name to associate with 127.0.0.1. I added the following to the http-vhosts.conf file: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot "c:/wamp/www/ladybug" ServerName ladybug ErrorLog "logs/your_own-error.log" CustomLog "logs/your_own-access.log" common </VirtualHost> <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot "c:/wamp/www" ServerName localhost ErrorLog "logs/localhost-error.log" CustomLog "logs/localhost-access.log" common </VirtualHost> Any idea why I can't access my projects from typing in my DYNDNS URL? Also, is it possible to setup virtual hosts so that when I type in http://projects from a random computer outside of my network, I access url.dyndns.info/projects (a.k.a. my WAMP projects on my home computer)? Help is much appreciated, thanks!

    Read the article

  • Excluding files from web logs

    - by Ray
    I originally tried this question on StackOverflow, but it was suggested that serverfault was a better choice. So, here it is... Looking through my web logs, I see a lot of entries that don't interest me. Some of them are commonly used images, css files, and scripts, which I can easily exclude by un-checking the 'log visits' check box in IIS for the folder properties. I would also like to exclude log entries for certain common requests which are not in their own folders. Mostly, 'favicon.ico'. 'scriptresource.axd', and 'webresource.axd'. These (especially scriptresource.axd) make up almost a third of a typical log file on my site. So, the question is, how do I tell IIS not to log these requests? And is there any reason that this is a bad idea? The purpose of doing this is to reduce the log file size and the amount of work the server has to do, to make the log file more manageable when I need to dig in to them for troubleshooting, and for my own curiosity. I realize that log file parsers can skip the junk, but I am interested in reducing the raw files, before parsing.

    Read the article

  • sox mix nested scripts on amazon ec2 rhel linux

    - by Ray
    I'm trying to use "sox" to mix some audio files. The command works great on my Mac terminal sox -m audio.wav "| sox upload.wav -p trim 2 1 pad 6" final.wav This mixes (not concatenate) audio.wav and a section of upload.wav from the 2nd second to the 3rd second and adds 6 seconds of padding in the front, and outputs to final.wav Now the problem is, the SAME EXACT command does NOT work my Amazon EC2 RHEL box. (sox is installed correctly). I get the following error sox soxio: Can't open input file `| sox upload.wav -p trim 2 2 pad 6': No such file or directory For some reason RedHat doesn't like the double quotes. Even though it is documented to be used this way. Thanks for your help!

    Read the article

  • Spring-mvc project can't select from a particular mysql table

    - by Dan Ray
    I'm building a Spring-mvc project (using JPA and Hibernate for DB access) that is running just great locally, on my dev box, with a local MySQL database. Now I'm trying to put a snapshot up on a staging server for my client to play with, and I'm having trouble. Tomcat (after some wrestling) deploys my war file without complaint, and I can get some response from the application over the browser. When I hit my main page, which is behind Spring Security authentication, it redirects me to the login page, which works perfectly. I have Security configured to query the database for user details, and that works fine. In fact, a change to a password in the database is reflected in the behavior of the login form, so I'm confident it IS reaching the database and querying the user table. Once authenticated, we go to the first "real" page of the app, and I get a "data access failure" error. The server's console log gets this line (redacted): ERROR org.hibernate.util.JDBCExceptionReporter - SELECT command denied to user 'myDbUser'@'localhost' for table 'asset' However, if I go to MySQL from the shell using exactly the same creds, I have no problem at all selecting from the asset table: [development@tomcat01stg]$ mysql -u myDbUser -pmyDbPwd dbName ... mysql> \s -------------- mysql Ver 14.12 Distrib 5.0.77, for redhat-linux-gnu (i686) using readline 5.1 Connection id: 199 Current database: dbName Current user: myDbUser@localhost ... UNIX socket: /var/lib/mysql/mysql.sock -------------- mysql> select count(*) from asset; +----------+ | count(*) | +----------+ | 19 | +----------+ 1 row in set (0.00 sec) I've broken down my MySQL access settings, cleaned out the user and re-run the grant commands, set up a version of the user from 'localhost' and another from '%', making sure to flush permissions.... Nothing is changing the behavior of this thing. What gives?

    Read the article

  • iPhone always assigned wrong ip

    - by Ashley Ray
    for some reason most of the time my iPhone connects to the home network the ip address seems wrongly assigned as it 'loses connection' even even with strong reception. If I change the ip address to a static from 168.2.10 to 168.2.15 works fine until it appears to renew back to the prior. I am using a power-plug extender from the modem to router. Then have a laptop Printer playstation tv and another iPhone that always connect fine. The modem also has a crappy wireless which I haven't connected any devices to. I'm sure the forum will have a simple answer!

    Read the article

  • HTTP 401 error in Windows Authentication disappears after swapping Providers

    - by Ray Cheng
    The IIS 7 on Windows 2008 R2 is acting really weird. We deploy our web apps as web sites with appcmd.exe. After they are deployed, if I browse to them, I'll get HTTP 401 errors. The web sites are only have Windows Authentication enabled and the providers are Negotiate and NTLM in such order. But if I swap the providers, the HTTP 401 error goes away. Even if I swap it back, the errors are still gone. So the order of the providers doesn't seem to matter, what matters is the swapping. It must have triggered something. Even if we delete the web site and application pool and reinstall the web sites, the errors are still gone. So far, we can't reproduce it easily since it happens randomly. Has anyone experienced this? How do I go about to troubleshoot it?

    Read the article

  • Seeking a solution to automatically copy files from the cd-rom disk to the USB drive once it's connected.

    - by Ray Nathan
    I plan to distribute a free CD that automatically copies files to a connected usb device. This process will be done on the computers of the users that obtain the cd. The CD will contain an autorun.ini file that will instruct the computer to copy a set of files located on the cd..to a specific directory on the connected usb device. The usb drive letter is not the same on all the systems, therefore...Windows XP should automatically know the drive letter of the usb device before the copy operation begins. What would be the best way of creating a short batch file or script that I can place on the CD to execute this process? Also, please note that it is NOT feasible or recommended to include a batch file on the USB devices to sync this operation due to the explanation at the beginning of this paragraph. :) Thank You All

    Read the article

  • Outlook Registry Key Damaged; Tried "Fix It" and lost everything

    - by Ray
    My outlook 2007 (on Windows 7 64 bit) worked fine for two weeks. I then installed a printer/scanner/copier and the Outlook Window wouldn't open. I went to Microsoft's website and found a page that said my registry key was damaged. The page had a link to a Fix It program. I ran the program and it looks like all my Outlook data was wiped out. Can I get the data back? For future reference, how should I protect myself if the key goes bad again? Do you think I should unistall Outlook and re-install?

    Read the article

  • OWA 2003 404 error only for calender

    - by ray
    We have a exchange 2003 published through isa 2006 , for every user this is working fine except one who receives a 404 error every time they try and view details of the calender, I have cloned their account which work's fine. How do I troubleshoot or resolve this?

    Read the article

  • In Excel format number with optional decimal places

    - by Ray
    Simple: I have numbers in cells in excel. I want the numbers formatted so that if they have decimal places they show to a maximum of 2DP and if they have no decimal places it doesn't show any. For example. 15 should be formatted as 15 NOT 15.00 14.3453453 should be formatted as 14.35 12.1 should be formatted as 12.1 0 should be formatted as 0 The closest custom format code I've come up with is 0.##. Unfortunately this formats 15.00 as 15. (note the extra decimal place). Edit: To further complicate the issues, the spreadsheet is a result of an export from SQL Server Reporting Services. So no macros are possible. Oh well, it looks like 0.## is my best bet, and they can just live with the extra period.

    Read the article

  • Automating the installation using SSH

    - by RAY
    I am running a bash script from a remote host to run a binary file which installs 64 bit JDK 6 update 29 on multiple VMs across the Environment. It is installing the file but, at the last line i have to hit a enter to complete the installation. I want to fully automate the script where i do not have to hit the enter at the last line. This is what i am using ssh ${V_TIERS}@${V_TIERS} 'cd JDK; sh jdk-6u29-solaris-sparcv9.sh' It updates as desired, but during install i have to hit enter to continue and complete the installation. Can anybody please help to fully automate the update process.

    Read the article

  • What does the NTFS encryption protect against?

    - by Ray
    I have encrypted a folder from the (PropertiesAdvancedEncrypt contents to secure data). However when I change my user profile to another one which is also an administrator the folder seems to be accessible as if nothing happened. What exactly does this encryption protect against. I'm looking to encrypt folders that no other user, or another OS or even if the HDD were to be removed and plugged to another device will be accessible. My OS is Windows 7 Ultimate. Any suggestions?

    Read the article

  • What makes a Software Craftsman?

    - by Liam McLennan
    At the end of my visit to 8th Light Justin Martin was kind enough to give me a ride to the train station; for my train back to O’Hare. Just before he left he asked me an interesting question which I then posted to twitter: Liam McLennan: . @JustinMartinM asked what I think is the most important attributes of craftsmen. I said, "desire to learn and humility". What's yours? 6:25 AM Apr 17th via TweetDeck several people replied with excellent contributions: Alex Hung: @liammclennan I think kaizen sums up craftmanship pretty well, which is almost same as yours Steve Bohlen: @alexhung @liammclennan those are both all about saying "knowing what you don't know and not being afraid to go learn it" (and I agree!) Matt Roman: @liammclennan @JustinMartinM a tempered compulsion for constant improvement, and an awareness of what needs improving. Justin Martin: @mattroman @liammclennan a faculty for asking challenging questions, and a persistence to battle through difficult obstacles barring growth I thought this was an interesting conversation, and I would love to see other people contribute their opinions. My observation is that Alex, Steve, Matt and I seem to have essentially the same answer in different words. It is also interesting to note (as Alex pointed out) that these definitions are very similar to Alt.NET and the lean concept of kaizen.

    Read the article

  • Today's Links (6/23/2011)

    - by Bob Rhubart
    Lydia Smyers interviews Justin "Mr. OTN" Kestelyn on the Oracle ACE Program Justin Kestelyn describes the Oracle ACE program, what it means to the developer community, and how to get involved. Incremental Essbase Metadata Imports Now Possible with OBIEE 11g | Mark Rittman "So, how does this work, and how easy is it to implement?" asks Oracle ACE Director Mark Rittman, and then he dives in to find out. ORACLENERD: The Podcast Oracle ACE Chet "ORACLENERD" Justice recounts his brush with stardom on Christian Screen's The Art of Business Intelligence podcast. Bay Area Coherence Special Interest Group Next Meeting July 21, 2011 | Cristóbal Soto Soto shares information on next month's Bay Area Coherence SIG shindig. New Cloud Security Book: Securing the Cloud by Vic Winkler | Dr Cloud's Flying Software Circus "Securing the Cloud is the most useful and informative about all aspects of cloud security," says Harry "Dr. Cloud" Foxwell. Oracle MDM Maturity Model | David Butler "The model covers maturity levels around five key areas: Profiling data sources; Defining a data strategy; Defining a data consolidation plan; Data maintenance; and Data utilization," says Butler. Integrating Strategic Planning for Cloud and SOA | David Sprott "Full blown Cloud adoption implies mature and sophisticated SOA implementation and impacts many business processes," says Sprott.

    Read the article

  • ASP.NET MVC File Upload Error - "The input is not a valid Base-64 string"

    - by Justin
    Hey all, I'm trying to add a file upload control to my ASP.NET MVC 2 form but after I select a jpg and click Save, it gives the following error: The input is not a valid Base-64 string as it contains a non-base 64 character, more than two padding characters, or a non-white space character among the padding characters. Here's the view: <% using (Html.BeginForm("Save", "Developers", FormMethod.Post, new {enctype = "multipart/form-data"})) { %> <%: Html.ValidationSummary(true) %> <fieldset> <legend>Fields</legend> <div class="editor-label"> Login Name </div> <div class="editor-field"> <%: Html.TextBoxFor(model => model.LoginName) %> <%: Html.ValidationMessageFor(model => model.LoginName) %> </div> <div class="editor-label"> Password </div> <div class="editor-field"> <%: Html.Password("Password") %> <%: Html.ValidationMessageFor(model => model.Password) %> </div> <div class="editor-label"> First Name </div> <div class="editor-field"> <%: Html.TextBoxFor(model => model.FirstName) %> <%: Html.ValidationMessageFor(model => model.FirstName) %> </div> <div class="editor-label"> Last Name </div> <div class="editor-field"> <%: Html.TextBoxFor(model => model.LastName) %> <%: Html.ValidationMessageFor(model => model.LastName) %> </div> <div class="editor-label"> Photo </div> <div class="editor-field"> <input id="Photo" name="Photo" type="file" /> </div> <p> <%: Html.Hidden("DeveloperID") %> <%: Html.Hidden("CreateDate") %> <input type="submit" value="Save" /> </p> </fieldset> <% } %> And the controller: //POST: /Secure/Developers/Save/ [AcceptVerbs(HttpVerbs.Post)] public ActionResult Save(Developer developer) { //get profile photo. var upload = Request.Files["Photo"]; if (upload.ContentLength > 0) { string savedFileName = Path.Combine( ConfigurationManager.AppSettings["FileUploadDirectory"], "Developer_" + developer.FirstName + "_" + developer.LastName + ".jpg"); upload.SaveAs(savedFileName); } developer.UpdateDate = DateTime.Now; if (developer.DeveloperID == 0) {//inserting new developer. DataContext.DeveloperData.Insert(developer); } else {//attaching existing developer. DataContext.DeveloperData.Attach(developer); } //save changes. DataContext.SaveChanges(); //redirect to developer list. return RedirectToAction("Index"); } Thanks, Justin

    Read the article

  • Delphi 7 SOAP Authentication and SessionID HowTo

    - by Justin Philbrow
    Hello All, I am developing a 3 tier database application. 1.) MS SQL DB 2.) Middle tier SOAP Server (with Delphi 7) connected to the DB 3.) Clients (first win32 gui (with Delphi 7) - later other platfomrs) connected to the SOAP server I chose a SOAP Server to be open to various clients at a later stage (also some of the win32 gui clients will be stationed abroad - so the clients need to be thin) (this as suggested by Dr. Bob). I am new to SOAP and have been looking at different examples and papers about authentication. But cant quite get my head around it. I have made a SOAP server and client with Delphi's SOAP Server Application Wizard and added a SOAP SERVER Data Module, added a database connection and some datasets and providers. Connected the client with dbgrid etc and that part works fine. But I want the client first to login and then be able to access data and I want the server to log each connection and also when the client logs off or is disconnected, so I am guessing I need the sessionID and a timeout. I also want the server to be able to tell the clients who else is "connected" (or whos session is still active) at any given time. I have gathered that I need to make a authentication header, but cant figure out where or who I can get a sessionID. I presume that each time a client connectes to the server the server generates a sessionID? How do I get this? Any help or suggestions/pointer would be appreciated, thanks Justin OK take 2: OK, I have done the following so far (this is used from the example Bank Account SOAP application that comes with Delphi 7): procedure TForm1.btnLoginClick(Sender: TObject); var H: TAuthHeader; Headers: ISOAPHeaders; SoapData: IThorPayServerDB; begin SoapData := HTTPRIOOnForm as IThorPayServerDB; if not(SoapData.login(edtUser.Text,edtPassword.Text)) then begin showmessage('Not correct login'); exit; end; Headers := SoapData as ISoapHeaders; { Get the header from the incoming message } Headers.Get(TAuthHeader, TSoapHeader(H)); try if H < nil then begin FIdKey := H.IdNumber; FTimeStamp := H.TimeStamp; end else ShowMessage('No authentication header received from server'); finally H.Free; end; if FIdKey 0 then showmessage('Authenticated');; end; The SoapData.login returns the correct result, but for some reason I cant get hold of the header. In this case H is nil and the result becomes 'No authentication header received from server'. If I intersept the SOAP xml I can see that the header is there, here is the returned package: 1 1 4208687 2010-05-14T10:03:49.469+03:00 true Anyone any idea? In this case I am not using the SOAPConnetion that I am using for the DB, but a seperate HTTPTRIO component.

    Read the article

  • ASP.NET MVC 2 - Saving child entities on form submit

    - by Justin
    Hey, I'm using ASP.NET MVC 2 and am struggling with saving child entities. I have an existing Invoice entity (which I create on a separate form) and then I have a LogHours view that I'd like to use to save InvoiceLog's, which are child entities of Invoice. Here's the view: <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<TothSolutions.Data.Invoice>" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Log Hours </asp:Content> <asp:Content ID="Content3" ContentPlaceHolderID="HeadContent" runat="server"> <script type="text/javascript"> $(document).ready(function () { $("#InvoiceLogs_0__Description").focus(); }); </script> </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>Log Hours</h2> <% using (Html.BeginForm("SaveHours", "Invoices")) {%> <%: Html.ValidationSummary(true) %> <fieldset> <legend>Fields</legend> <table> <tr> <th>Date</th> <th>Description</th> <th>Hours</th> </tr> <% int index = 0; foreach (var log in Model.InvoiceLogs) { %> <tr> <td><%: log.LogDate.ToShortDateString() %></td> <td><%: Html.TextBox("InvoiceLogs[" + index + "].Description")%></td> <td><%: Html.TextBox("InvoiceLogs[" + index + "].Hours")%></td> <td>Hours</td> </tr> <% index++; } %> </table> <p> <%: Html.Hidden("InvoiceID") %> <%: Html.Hidden("CreateDate") %> <input type="submit" value="Save" /> </p> </fieldset> <% } %> <div> <%: Html.ActionLink("Back to List", "Index") %> </div> </asp:Content> And here's the controller code: //GET: /Secure/Invoices/LogHours/ public ActionResult LogHours(int id) { var invoice = DataContext.InvoiceData.Get(id); if (invoice == null) { throw new Exception("Invoice not found with id: " + id); } return View(invoice); } //POST: /Secure/Invoices/SaveHours/ [AcceptVerbs(HttpVerbs.Post)] public ActionResult SaveHours([Bind(Exclude = "InvoiceLogs")]Invoice invoice) { TryUpdateModel(invoice.InvoiceLogs, "InvoiceLogs"); invoice.UpdateDate = DateTime.Now; invoice.DeveloperID = DeveloperID; //attaching existing invoice. DataContext.InvoiceData.Attach(invoice); //save changes. DataContext.SaveChanges(); //redirect to invoice list. return RedirectToAction("Index"); } And the data access code: public static void Attach(Invoice invoice) { var i = new Invoice { InvoiceID = invoice.InvoiceID }; db.Invoices.Attach(i); db.Invoices.ApplyCurrentValues(invoice); } In the SaveHours action, it properly sets the values of the InvoiceLog entities after I call TryUpdateModel but when it does SaveChanges it doesn't update the database with the new values. Also, if you manually update the values of the InvoiceLog entries in the database and then go to this page it doesn't populate the textboxes so it's clearly not binding correctly. Thanks, Justin

    Read the article

  • Silverlight Cream Monday WP7 App Review # 2

    - by Dave Campbell
    Today's Review (alphabetic order): GooNews, Grocery Shopping List, Need for Speed, SurfCube, and United Nations News. I'm a day late if these are going to be 'Monday' posts, but there are lots of apps, lots of goodness, and lots of email, so I might try to do 2 a week, we'll see. So once again I've got a small review of 5 apps that are either on my phone or have been. Disclaimers at the end. In this Issue:   GooNews is a very cool app from Shawn Wildermuth (AgiliTrain). I don't know if he uses this as a demo during his instruction, but it definitely serves a purpose... wanna pick up the top news items from Google on a never-ending basis? ... this is it. You can add your own keyword searches, and send stories to InstaPaper or share via email. I like this because it brings me the news quickly and updated, and works great. GooNews is by AgiliTrain and is Free This was a request by the author, and actually surprised me. I'm a big one for lists, but I would have just done a OneNote list to SkyDrive and to my phone. This app is a lot more than that, but will take you some setup to make it be 'yours'. For obvious reasons, there are no unit prices on things, so you have to set that up to get some idea of the cost of what you're shopping for. But if you do that, you'll get a nice total. Lots of thought went into the various categories and you can add your own. There's a bit of animation on the category selection that's nice. He seems to have covered all the bases necessary to use this, even shopping 'plans' that can be saved, and emailing of lists. As I said, I'm more of a raw list person, but if you take the time to set this up, it should work very nicely for you. Grocery Shopping List is by Grocery Shopper and is $0.99 ($1.99 after Feb 1) with a free trial. This was my 2nd commercial game I bought, and the one I've played the most. I ran the trial, thought it worked great, and bought it. I've had a lot of fun with this... there's no gas pedal.. your foot is in the carbeurator from the GO!, and unless you wanna tap the screen and brake like a little girl, just hang onto the steering wheel (the phone), and guide your way through. Hours of fun and challenges here. I like this because it's got some challenge to it, and the cars seem to be very realistic in their reactions. Need for Speed Undercover is by Electronic Arts is $4.99 and has a free trial. SurfCube Browser is another app by the folks that did the GuitarTuner I reviewed on Monday. You have to see SurfCube to believe it. You've probably seen the YouTube video, if not check SilverlightCream number 1017. The app works very solid, and just as the video demonstrates. I downloaded and tried this, and it immediately did 2 things: bought it, and pinned it to my start page. I like this because it's fun to work with, and it works great as a browser. I'm about *this* close to replacing the IE tile on my front page with SurfCube. SurfCube Browser is by Kinabalu Innovation Limited and is $1.99 and has a free trial. Coming in with another News app is United Nations News by Justin Angel. This is definitely a news aggregator for 'grown ups'... news, photos, videos, and radio broadcsts from the international community all in one very slick app. This is an amazingly well thought-out and complete app. Even better yet, Justin has the code on CodePlex. A very well-done International news aggregator. United Nations News is by Justin Angel and is Free. A few disclaimers: Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week (twice if I find time), and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. I'm still playing with the format, comments are welcome. I decided I should alphabetize the list today... so there's no order implied Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • 11 Types of Developers

    - by Lee Brandt
    Jack Dawson Jack Dawson is the homeless drifter in Titanic. At one point in the movie he says, “I figure life’s a gift, and I don’t intend on wasting it.” He is happy to wander wherever life takes him. He works himself from place to place, making just enough money to make it to his next adventure. The “Jack Dawson” developer clings on to any new technology as the ‘next big thing’, and will find ways to shoe-horn it in to places where it is not a fit. He is very appealing to the other developers because they want to try the newest techniques and tools too, He will only stay until the new technology either bores him or becomes problematic. Jack will also be hard to find once the technology has been implemented, because he will be on to the next shiny thing. However, having a Jack Dawson on your team can be beneficial. Jack can be a great ally when attempting to convince a stodgy, corporate entity to upgrade. Jack usually has an encyclopedic recall of all the new features of the technology upgrade and is more than happy to interject them in any conversation. Tom Smykowski Tom is the neurotic employee in Office Space, and is deathly afraid of being fired. He will do only what is necessary to keep the status quo. He believes as long as nothing changes, his job is safe. He will scoff at anything new and be the naysayer during any change initiative. Tom can be useful in off-setting Jack Dawson. Jack will constantly be pushing for change and Tom will constantly be fighting it. When you see that Jack is getting kind of bored with a new technology and Tom has finally stopped wetting himself at the mere mention of it, then it is probably the sweet spot of beginning to implement that new technology (providing it is the right tool for the job). Ray Consella Ray is the guy who built the Field of Dreams. He took a risk. Sometimes he screwed it up, but he knew he didn’t want to end up regretting not attempting it. He constantly doubted himself, but he knew he had to keep going. Granted, he was doing what the voices in his head were telling him to do, but my point is he was driven to do something that most people considered crazy. Even when his friends, his wife and even he told himself he was crazy, somewhere inside himself, he knew it was the right thing to do. These are the innovators. These are the Bill Gates and Steve Jobs of the world. The take risks, they fail, they learn and the get better. Obviously, this kind of person thrives in start-ups and smaller companies, but that is due to their natural aversion to bureaucracy. They want to see their ideas put into motion quickly, and withdrawn quickly if it doesn’t work. Short feedback cycles are essential to Ray. He wants to know if his idea is working or not. He wants to modify or reverse his idea if it is not working or makes things worse. These are the agilistas. May I always be one.

    Read the article

  • The application called an interface that was marshalled for a different thread

    - by X-Ray
    i'm writing a delphi app that communicates with excel. one thing i noticed is that if i call the Save method on the Excel workbook object, it can appear to hang because excel has a dialog box open for the user. i'm using the late binding. i'd like for my app to be able to notice when Save takes several seconds and then take some kind of action like show a dialog box telling this is what's happening. i figured this'd be fairly easy. all i'd need to do is create a thread that calls Save and have that thread call Excel's Save routine. if it takes too long, i can take some action. procedure TOfficeConnect.Save; var Thread:TOfficeHangThread; begin // spin off as thread so we can control timeout Thread:=TOfficeSaveThread.Create(m_vExcelWorkbook); if WaitForSingleObject(Thread.Handle, 5 {s} * 1000 {ms/s})=WAIT_TIMEOUT then begin Thread.FreeOnTerminate:=true; raise Exception.Create(_('The Office spreadsheet program seems to be busy.')); end; Thread.Free; end; TOfficeSaveThread = class(TThread) private { Private declarations } m_vExcelWorkbook:variant; protected procedure Execute; override; procedure DoSave; public constructor Create(vExcelWorkbook:variant); end; { TOfficeSaveThread } constructor TOfficeSaveThread.Create(vExcelWorkbook:variant); begin inherited Create(true); m_vExcelWorkbook:=vExcelWorkbook; Resume; end; procedure TOfficeSaveThread.Execute; begin m_vExcelWorkbook.Save; end; i understand this problem happens because the OLE object was created from another thread (absolutely). how can i get around this problem? most likely i'll need to "re-marshall" for this call somehow... any ideas? thank you!

    Read the article

  • unittest import error with virtualenv + google-app-engine-django

    - by Ray Yun
    I'm working with google-app-engine-django + zipped django. Just running "python manage.py test" succeeded without error. But with virtualenv, test was failed with "import unittest error". same error with Django 1.1. - OSX 10.5.6 - google-app-engine-django (r101 via svn) : r100 was failed with launcher 1.3.0 - GoogleAppLauncher 1.3.0 - Django 1.1 & 1.1.1 (zipped) : both failed - virtualenv 1.4.5 - virtualenvwrapper 1.24 Error Message: (django_appengine)Reiot:warclouds Reiot$ python manage.py test WARNING:root:Could not read datastore data from /var/folders/UZ/UZ1vQeLFH2ShHk4kIiLcFk+++TI/-Tmp-/django_google-app-engine-django.datastore INFO:root:zipimporter('/Volumes/data/Documents/warclouds/django.zip', 'django/core/serializers/') .WARNING:root:Can't open zipfile /Users/Reiot/.virtualenvs/django_appengine/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg: IOError: [Errno 13] file not accessible: '/Users/Reiot/.virtualenvs/django_appengine/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg' WARNING:root:Can't open zipfile /Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c9-py2.5.egg: IOError: [Errno 13] file not accessible: '/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c9-py2.5.egg' ERROR:root:Exception encountered handling request Traceback (most recent call last): File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 3177, in _HandleRequest self._Dispatch(dispatcher, self.rfile, outfile, env_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 3120, in _Dispatch base_env_dict=env_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 515, in Dispatch base_env_dict=base_env_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 2379, in Dispatch self._module_dict) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 2289, in ExecuteCGI reset_modules = exec_script(handler_path, cgi_path, hook) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 2185, in ExecuteOrImportScript exec module_code in script_module.__dict__ File "/Volumes/data/Documents/warclouds/main.py", line 28, in <module> from appengine_django import InstallAppengineHelperForDjango File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1264, in Decorate return func(self, *args, **kwargs) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1914, in load_module return self.FindAndLoadModule(submodule, fullname, search_path) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1264, in Decorate return func(self, *args, **kwargs) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1816, in FindAndLoadModule description) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1264, in Decorate return func(self, *args, **kwargs) File "/Applications/GoogleAppEngineLauncher.app/Contents/Resources/GoogleAppEngine-default.bundle/Contents/Resources/google_appengine/google/appengine/tools/dev_appserver.py", line 1767, in LoadModuleRestricted description) File "/Volumes/data/Documents/warclouds/appengine_django/__init__.py", line 44, in <module> import unittest ImportError: No module named unittest INFO:root:"GET / HTTP/1.1" 500 - INFO:root:zipimporter('/Users/Reiot/.virtualenvs/django_appengine/lib/python2.5/site-packages/setuptools-0.6c11-py2.5.egg', '') INFO:root:zipimporter('/Library/Frameworks/Python.framework/Versions/2.5/lib/python2.5/site-packages/setuptools-0.6c9-py2.5.egg', '') F........................................................... ====================================================================== FAIL: a request to the default page works in the dev_appserver ---------------------------------------------------------------------- Traceback (most recent call last): File "/Volumes/data/Documents/warclouds/appengine_django/tests/integration_test.py", line 176, in testBasic self.assertEquals(rv.status_code, 200) AssertionError: 500 != 200 I also tried with console import but it was ok. > which python /Users/Reiot/.virtualenvs/django_appengine/bin/python > python >>> import unittest Here is my environments: $ mkvirtualenv --no-site-packages no-django $ mkvirtualenv --no-site-packages django-1.1 $ mkvirtualenv --no-site-packages django-1.1.1 (django-1.1)$ easy_install Django-1.1.tar (django-1.1.1)$ easy_install Django-1.1.1.tar $ mkdir google-app-engine-django-svn $ cp -r google-app-engine-django-svn google-app-engine-django-svn-django-1.1 // copy appropriate django.zip $ cp -r google-app-engine-django-svn google-app-engine-django-svn-django-1.1.1 // copy appropriate django.zip

    Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >