Search Results

Search found 360 results on 15 pages for 'snmp traps'.

Page 15/15 | < Previous Page | 11 12 13 14 15 

• Un-failing over a Cisco PIX 515e

  - by ABrown

  We had a power outage at our data center last week and when our dual PIX 515E running IOS 7.0(8) (configured with a failover cable) came back, they were in a failed over state where the Secondary unit is active and the Primary unit is standby I have tried 'failover reset', 'failover active', and 'failover reload-standby' as well as executing reloads on both units in a variety of orders, and they don't come back Primary/Active Secondary/Standby. The only thing in my arsenal that I haven't tried is driving to the data center and performing a hard reboot, which I hate to do. I have read How Failover Works on the Cisco Secure Firewall and it seems like this should be wicked straight forward. output of show failover on Primary: Failover On Cable status: Normal Failover unit Primary Failover LAN Interface: N/A - Serial-based failover enabled Unit Poll frequency 15 seconds, holdtime 45 seconds Interface Poll frequency 15 seconds Interface Policy 1 Monitored Interfaces 2 of 250 maximum Version: Ours 7.0(8), Mate 7.0(8) Last Failover at: 02:52:05 UTC Mar 10 2010 This host: Primary - Standby Ready Active time: 0 (sec) Interface outside (x.x.x.165): Normal Interface inside (y.y.y.3): Normal Other host: Secondary - Active Active time: 897045 (sec) Interface outside (x.x.x.164): Normal Interface inside (y.y.y.4): Normal Stateful Failover Logical Update Statistics Link : Unconfigured. output of show failover on Secondary: Failover On Cable status: Normal Failover unit Secondary Failover LAN Interface: N/A - Serial-based failover enabled Unit Poll frequency 15 seconds, holdtime 45 seconds Interface Poll frequency 15 seconds Interface Policy 1 Monitored Interfaces 2 of 250 maximum Version: Ours 7.0(8), Mate 7.0(8) Last Failover at: 02:03:04 UTC Feb 28 2010 This host: Secondary - Active Active time: 896925 (sec) Interface outside (x.x.x.164): Normal Interface inside (y.y.y.4): Normal Other host: Primary - Standby Ready Active time: 0 (sec) Interface outside (x.x.x.165): Normal Interface inside (y.y.y.3): Normal Stateful Failover Logical Update Statistics Link : Unconfigured. I'm seeing the following in my syslog: Mar 10 03:05:00 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover reset' command. Mar 10 03:05:09 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover reload-standby' command. Mar 10 03:05:12 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=406,op=20,my=Active,peer=Failed. Mar 10 03:05:12 fw1 %PIX-6-720028: (VPN-Secondary) HA status callback: Peer state Failed. Mar 10 03:06:09 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=401,op=0,my=Active,peer=Failed. Mar 10 03:06:09 fw1 %PIX-6-720024: (VPN-Secondary) HA status callback: Control channel is down. Mar 10 03:06:09 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=401,op=1,my=Active,peer=Failed. Mar 10 03:06:10 fw1 %PIX-6-720024: (VPN-Secondary) HA status callback: Control channel is up. Mar 10 03:06:10 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=411,op=2,my=Active,peer=Failed. Mar 10 03:06:23 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=406,op=80,my=Active,peer=Standby Ready. Mar 10 03:06:23 fw1 %PIX-6-720028: (VPN-Secondary) HA status callback: Peer state Standby Ready. Mar 10 03:06:24 fw2 %PIX-6-720027: (VPN-Primary) HA status callback: My state Standby Ready. Mar 10 03:07:05 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover reset' command. Mar 10 03:07:31 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover active' command. Mar 10 03:08:04 fw1 %PIX-5-611103: User logged out: Uname: enable_1 Mar 10 03:08:04 fw1 %PIX-6-315011: SSH session from admin1_int on interface inside for user "pix" terminated normally Mar 10 03:08:39 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=406,op=20,my=Active,peer=Failed. Mar 10 03:08:39 fw1 %PIX-6-720028: (VPN-Secondary) HA status callback: Peer state Failed. Mar 10 03:09:10 fw1 %PIX-6-605005: Login permitted from admin1_int/36891 to inside:192.168.4.4/ssh for user "pix" Mar 10 03:09:23 fw1 %PIX-5-111008: User 'enable_15' executed the 'failover reset' command. Mar 10 03:09:38 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=401,op=0,my=Active,peer=Failed. Mar 10 03:09:39 fw1 %PIX-6-720024: (VPN-Secondary) HA status callback: Control channel is down. Mar 10 03:09:39 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=401,op=1,my=Active,peer=Failed. Mar 10 03:09:39 fw1 %PIX-6-720024: (VPN-Secondary) HA status callback: Control channel is up. Mar 10 03:09:39 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=411,op=2,my=Active,peer=Failed. Mar 10 03:09:52 fw1 %PIX-6-720032: (VPN-Secondary) HA status callback: id=3,seq=200,grp=0,event=406,op=80,my=Active,peer=Standby Ready. Mar 10 03:09:52 fw1 %PIX-6-720028: (VPN-Secondary) HA status callback: Peer state Standby Ready. Mar 10 03:09:53 fw2 %PIX-6-720027: (VPN-Primary) HA status callback: My state Standby Ready. I'm not exactly sure how to interpret that syslog data. Primary doesn't seem to even try to become Active. When I reload the individual units separately, my connections are retained, so it doesn't seem like I have a real hardware failure. Is there something I can query (IOS or SNMP) to check for hardware issues? Any thoughts? My IOS-fu is weak. Thanks for any help you might provide, Aaron

  Read the article

• Can't Remove Logical Drive/Array from HP P400

  - by Myles

  This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

  Read the article

• Uget tray icon not showing

  - by ArK

  Since I upgraded to Saucy, Uget is not showing in the system tray, although the Always show tray icon option in Uget settings is checked. P.S. this happens only with Uget, all the other Softwares have working tray icons (vlc,qbittorrent..) Here is the snapshot which shows the settings of Uget: sudo dpkg -l | grep -e "^rc" -e "^iU": rc account-plugin-generic-oauth 0.10bzr13.03.26-0ubuntu1.1 i386 GNOME Control Center account plugin for single signon - generic OAuth rc appmenu-gtk:i386 12.10.3daily13.04.03-0ubuntu1 i386 Export GTK menus over DBus rc appmenu-gtk3:i386 12.10.3daily13.04.03-0ubuntu1 i386 Export GTK menus over DBus rc arora 0.11.0-0ubuntu1 i386 simple cross platform web browser rc buc 0.5.2-20 i386 BUC rc clementine 1.1.1+dfsg-2ubuntu1 i386 modern music player and library organizer rc epiphany-browser 3.6.1-2ubuntu1 i386 Intuitive GNOME web browser rc epiphany-browser-data 3.6.1-2ubuntu3 all Data files for the GNOME web browser rc fancontrol 1:3.3.3-1ubuntu1 all utilities to read temperature/voltage/fan sensors rc flaremonitor 1.0-5 i386 It is an advanced browser integration helper module of FlareGet rc google-chrome-stable 28.0.1500.95-r213514 i386 The web browser from Google rc hal 0.5.14-8ubuntu1 i386 Hardware Abstraction Layer rc hotot-gtk 1:0.9.8.5+git20120630.884797d-1 all lightweight microblogging client - GTK+ wrapper rc jockey-common 0.9.7-0ubuntu13 all user interface and desktop integration for driver management rc libanalitza4abi1 4:4.10.4-0ubuntu0.1 i386 library to work with mathematical expressions rc libanalitza5 4:4.11.2-0ubuntu1 i386 library to work with mathematical expressions rc libanalitzagui4abi2 4:4.10.4-0ubuntu0.1 i386 library to work with mathematical expressions - GUI routines rc libanalitzaplot4 4:4.10.4-0ubuntu0.1 i386 library to work with mathematical expressions - plot routines rc libavcodec53:i386 6:0.8.6-1ubuntu2 i386 Libav codec library rc libavutil51:i386 6:0.8.6-1ubuntu2 i386 Libav utility library rc libbamf3-1:i386 0.4.0daily13.06.19~13.04-0ubuntu1 i386 Window matching library - shared library rc libboost-iostreams1.49.0 1.49.0-4 i386 Boost.Iostreams Library rc libboost-program-options1.49.0 1.49.0-4 i386 program options library for C++ rc libboost-python1.49.0 1.49.0-4 i386 Boost.Python Library rc libboost-thread1.49.0 1.49.0-4 i386 portable C++ multi-threading rc libbrlapi0.5:i386 4.4-8ubuntu4 i386 braille display access via BRLTTY - shared library rc libcamel-1.2-40 3.6.4-0ubuntu1.1 i386 Evolution MIME message handling library rc libcolumbus0-0 0.4.0daily13.04.16~13.04-0ubuntu1 i386 error tolerant matching engine - shared library rc libdns95 1:9.9.2.dfsg.P1-2ubuntu2.1 i386 DNS Shared Library used by BIND rc libdvbpsi7 0.2.2-1 i386 library for MPEG TS and DVB PSI tables decoding and generating rc libebackend-1.2-5 3.6.4-0ubuntu1.1 i386 Utility library for evolution data servers rc libechonest2.0:i386 2.0.2-0ubuntu1 i386 Qt library for communicating with The Echo Nest platform rc libechonest2.1:i386 2.1.0-2 i386 Qt library for communicating with The Echo Nest platform rc libedata-book-1.2-15 3.6.4-0ubuntu1.1 i386 Backend library for evolution address books rc libedata-cal-1.2-18 3.6.4-0ubuntu1.1 i386 Backend library for evolution calendars rc libftgl2 2.1.3~rc5-4ubuntu1 i386 library to render text in OpenGL using FreeType rc libgc1c3:i386 1:7.2d-0ubuntu5 i386 conservative garbage collector for C and C++ rc libgnome-desktop-3-4 3.6.3-0ubuntu1 i386 Utility library for loading .desktop files - runtime files rc libgtksourceview-3.0-0:i386 3.6.3-0ubuntu1 i386 shared libraries for the GTK+ syntax highlighting widget rc libgweather-3-1 3.6.2-0ubuntu1 i386 GWeather shared library rc libhal-storage1 0.5.14-8ubuntu1 i386 Hardware Abstraction Layer - shared library for storage devices rc libhal1 0.5.14-8ubuntu1 i386 Hardware Abstraction Layer - shared library rc libharfbuzz0:i386 0.9.13-1 i386 OpenType text shaping engine rc libhd16 16.0-2.2 i386 Hardware identification system library rc libibus-1.0-0:i386 1.4.2-0ubuntu2 i386 Intelligent Input Bus - shared library rc libical0 0.48-2 i386 iCalendar library implementation in C (runtime) rc libimobiledevice3 1.1.4-1ubuntu6.2 i386 Library for communicating with the iPhone and iPod Touch rc libisc92 1:9.9.2.dfsg.P1-2ubuntu2.1 i386 ISC Shared Library used by BIND rc libkdegamesprivate1 4:4.10.2-0ubuntu1 i386 private shared library for KDE games rc libkeybinder0 0.3.0-1ubuntu1 i386 registers global key bindings for applications rc libkgapi0:i386 0.4.4-0ubuntu1 i386 Google API library for KDE rc liblastfm1:i386 1.0.7-2 i386 Last.fm web services library rc libnetfilter-queue1 1.0.2-1 i386 Netfilter netlink-queue library rc libnl1:i386 1.1-7ubuntu1 i386 library for dealing with netlink sockets rc libossp-uuid16 1.6.2-1.3 i386 OSSP uuid ISO-C and C++ - shared library rc libpackagekit-glib2-14:i386 0.7.6-3ubuntu1 i386 Library for accessing PackageKit using GLib rc libpoppler28:i386 0.20.5-1ubuntu3 i386 PDF rendering library rc libprojectm2 2.1.0+dfsg-1build1 i386 Advanced Milkdrop-compatible music visualization library rc libqxt-core0:i386 0.6.1-7 i386 extensions to Qt core classes (LibQxt) rc libqxt-gui0:i386 0.6.1-7 i386 extensions to Qt GUI classes (LibQxt) rc libraw5:i386 0.14.7-0ubuntu1.13.04.2 i386 raw image decoder library rc librhythmbox-core6 2.98-0ubuntu5 i386 support library for the rhythmbox music player rc librhythmbox-core7 3.0.1-0~13.10~ppa1 i386 support library for the rhythmbox music player rc libsnmp15 5.4.3~dfsg-2.7ubuntu1 i386 SNMP (Simple Network Management Protocol) library rc libsqlite0 2.8.17-8fakesync1 i386 SQLite shared library rc libsyncdaemon-1.0-1 4.2.0-0ubuntu1 i386 Ubuntu One synchronization daemon library rc libtiff4:i386 3.9.7-2ubuntu1 i386 Tag Image File Format (TIFF) library (old version) rc libunity-core-6.0-5 7.0.0daily13.06.19~13.04-0ubuntu1 i386 Core library for the Unity interface. rc libva-wayland1:i386 1.2.1-0ubuntu0~raring i386 Video Acceleration (VA) API for Linux -- Wayland runtime rc libwayland0:i386 1.0.5-0ubuntu1 i386 wayland compositor infrastructure - shared libraries rc libwebp2:i386 0.1.3-3 i386 Lossy compression of digital photographic images. rc linux-image-3.8.0-19-generic 3.8.0-19.30 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc linux-image-3.8.0-21-generic 3.8.0-21.32 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc linux-image-3.8.0-22-generic 3.8.0-22.33 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc linux-image-3.8.0-26-generic 3.8.0-26.38 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc linux-image-3.8.0-27-generic 3.8.0-27.40 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc linux-image-3.9.0-030900-generic 3.9.0-030900.201304291257 i386 Linux kernel image for version 3.9.0 on 32 bit x86 SMP rc linux-image-3.9.0-030900rc8-generic 3.9.0-030900rc8.201304211835 i386 Linux kernel image for version 3.9.0 on 32 bit x86 SMP rc linux-image-extra-3.8.0-19-generic 3.8.0-19.30 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc linux-image-extra-3.8.0-21-generic 3.8.0-21.32 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc linux-image-extra-3.8.0-22-generic 3.8.0-22.33 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc linux-image-extra-3.8.0-26-generic 3.8.0-26.38 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc linux-image-extra-3.8.0-27-generic 3.8.0-27.40 i386 Linux kernel image for version 3.8.0 on 32 bit x86 SMP rc preload 0.6.4-2 i386 adaptive readahead daemon rc steam-launcher 1.0.0.39 all Launcher for the Steam software distribution service rc super-boot-manager 0.7.15 all Simple gui to configure Grub2, Burg and Plymouth. rc totem 3.6.3-0ubuntu6 i386 Simple media player for the GNOME desktop based on GStreamer rc transmission-gtk 2.77-0ubuntu1 i386 lightweight BitTorrent client (GTK interface) rc unity-common 7.0.0daily13.06.19~13.04-0ubuntu1 all Common files for the Unity interface. rc vino 3.6.2-0ubuntu4 i386 VNC server for GNOME rc wicd-daemon 1.7.2.4-4.1 all wired and wireless network manager - daemon rc wicd-gtk 1.7.2.4-4.1 all wired and wireless network manager - GTK+ client rc xscreensaver 5.15-2ubuntu1 i386 Automatic screensaver for X rc xscreensaver-data 5.15-3ubuntu1 i386 data files to be shared among screensaver frontends sudo dpkg -l | grep uget: ii uget 1.10.3-1 i386 easy-to-use download manager written in GTK+ sudo dpkg -l | grep indicator: ii gir1.2-appindicator3-0.1 12.10.1+13.10.20130920-0ubuntu2 i386 Typelib files for libappindicator3-1. ii gir1.2-syncmenu-0.1 12.10.5+13.10.20131011-0ubuntu1 i386 indicator for synchronisation processes status - bindings ii indicator-applet-complete 12.10.2+13.10.20130924.2-0ubuntu1 i386 Clone of the GNOME panel indicator applet ii indicator-application 12.10.1daily13.01.25-0ubuntu1 i386 Application Indicators ii indicator-appmenu 13.01.0+13.10.20130930-0ubuntu1 i386 Indicator for application menus. ii indicator-bluetooth 0.0.6+13.10.20131016-0ubuntu1 i386 System bluetooth indicator. ii indicator-datetime 13.10.0+13.10.20131023.2-0ubuntu1 i386 Simple clock ii indicator-keyboard 0.0.0+13.10.20131010.1-0ubuntu1 i386 Keyboard indicator ii indicator-messages 13.10.1+13.10.20131011-0ubuntu1 i386 indicator that collects messages that need a response ii indicator-multiload 0.3-0ubuntu1 i386 Graphical system load indicator for CPU, ram, etc. ii indicator-power 12.10.6+13.10.20131008-0ubuntu1 i386 Indicator showing power state. ii indicator-printers 0.1.7daily13.03.01-0ubuntu1 i386 indicator showing active print jobs ii indicator-session 12.10.5+13.10.20131023.1-0ubuntu1 i386 indicator showing session management, status and user switching ii indicator-sound 12.10.2+13.10.20131011-0ubuntu1 i386 System sound indicator. ii indicator-sync 12.10.5+13.10.20131011-0ubuntu1 i386 indicator for synchronisation processes status ii libappindicator1 12.10.1+13.10.20130920-0ubuntu2 i386 Application Indicators ii libappindicator3-1 12.10.1+13.10.20130920-0ubuntu2 i386 Application Indicators ii libindicator3-7 12.10.2+13.10.20130913-0ubuntu2 i386 panel indicator applet - shared library ii libindicator7 12.10.2+13.10.20130913-0ubuntu2 i386 panel indicator applet - shared library ii libsync-menu1:i386 12.10.5+13.10.20131011-0ubuntu1 i386 indicator for synchronisation processes status - libraries ii python-appindicator 12.10.1+13.10.20130920-0ubuntu2 i386 Python bindings for libappindicator ii sni-qt:i386 0.2.6-0ubuntu1 i386 indicator support for Qt ii telepathy-indicator 0.3.1daily13.06.19-0ubuntu1 i386 Desktop service to integrate Telepathy with the messaging menu.

  Read the article

• CodePlex Daily Summary for Sunday, March 25, 2012

  CodePlex Daily Summary for Sunday, March 25, 2012Popular ReleasesAsp.NET Url Router: v1.0: build for .net 2.0 and .net 4.0menu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...MemoryLifter: MemoryLifter 2.4.1: KNOWN ISSUE: Sometime the automatic installation of SQL Compact Edition dependency does not work, when you are behind a proxy server. To solve that problem install SQL CE 3.5 SP2 manually from the following link: http://www.microsoft.com/download/en/details.aspx?id=5783SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionUltra Presenter Desktop: UltraPresenter Desktop Version 2012.03.18: New release with new interface design.LoU: LoU.Dungeons V0: LoU.Dungeons V0SSIS GoogleAnalyticsSource: Version 1.0.3 x64: Now it's possible to select 225 metrics and 93 dimensions and I have modified almost all of the data types.HTML to docx Converter: htmltodocx_0.5.1_alpha: Improved UTF-8 support. Please note, for proper UTF-8 support, there appears to be an issue with PHPWord that needs to be addressed. See: http://phpword.codeplex.com/discussions/261365 for a discussion.Daun Management Studio: Daun Management Studio 0.1 (Alpha Version): These are these the alpha application packages for Daun Management Studio to manage MongoDB Server. Please visit our official website http://www.daun-project.comNew ProjectsBundle Transformer: Bundle Transformer - a modular extension for System.Web.Optimization. Classes CssTransformer and JsTransformer, included in the core of Bundle Transformer, implement interface IBundleTransform. They are intended to replace the standard classes CssMinify and JsMinify.Catel fody plugin: Catel plugin for Fody. For more information about Fody, see http://code.google.com/p/fody/.CharsetConverter: CharsetConverter makes it easier to convert a bunch of files from one charset to another. Files are backuped and recoded. You will no longer need to convert one file after another. It's developed in VB.NET.FNSYS: ??GM Spriter: GM Spriter creates copy rectangle and scaling data for sprites that can drawn in pieces. Supporting a more advanced, optimized, and less resource intensive method.htty: htty is the HTTP TTY, a console application for interacting with web servers.menu4web: menu4web is lightweight javascript code for creating dynamic menus on web sites.mvcpractice2: mvcpractice2National Transportation Information Control Protocol Suite: A Standards Compliant Extensible NTCIP Software Solution. It is utilized in all federally funded projects in the world over. It contains utilities for encoding, decoding in various layer formats such as HDLC, PMPP, SNMP (BER, PER Etc.) There are also some proprietary features. This software was developed in my Free Time because the software in use by my organization was severely lacking and always required some type of major change for the smallest thing. After implementation and...OpenEMR: OpenEMR is an open source medical practice management application (EHR EMR PMS) featuring fully integrated electronic health records, scheduling, electronic billing, internationalization, free support, a vibrant community, and a whole lot more. Mirror of Sourceforge OpenEMR project.Opera Extension Creator: The program helps create extensions for Opera. You can write code in another editor (program can automatically checks for changes on the disk) and only one click to create .oex file and install it in Opera. It's developed in (V)C# 2005 and .NET 2.0. PADNUG Site Redesign: Bringing the PADNUG web site up to current technologies and giving it a facelift.Practico1: ejercicios de practico 1Roslyn and C#-Derived Languages: Roslyn and C#-Derived Languages(for example: Axum)Series Organiser: An app that organises tv series episodes based on the file name into a series folder structure.Silverlight socket component: Beetle.SL?????Silverlight socket?????,???????????,??????????tcp??;?????????????.Skylark: Skylark is an n-tier application to test drive different .NET technologies across various domain problems. It's developed in .NET C#

  Read the article

• CodePlex Daily Summary for Wednesday, November 24, 2010

  CodePlex Daily Summary for Wednesday, November 24, 2010Popular ReleasesEdinamarry Free Tarot Software for Windows: Edinamarry Free Tarot Software Version 3.12: Version 3.12 - 24th November, 2010::: Contains new features and components. Fixed bugs too. History: Version 3.10 - 19th November 2010::: Contains bug fixes and replacements for older features. Added Collapsible Panels support. Client profiles and all cards data import and export, storage is now done in standalone databases. A new 2010-2011 Windows 7/XP freeware Tarot and Divinity Software for PC and Windows 7. Edinamarry brings to you an open Tarot Scribe Kit by which you can create your ...Deep Zoom for WPF: First Release: This first release of the Deep Zoom control has the same source code, binaries and demos as the CodeProject article (http://www.codeproject.com/KB/WPF/DeepZoom.aspx).Minemapper: Minemapper v0.1.2: Added cave and nether support. Added ability to enter a height (press enter or 'set height' button). Added View menu, moved 'Show Navigation Controls' there. Added View->Background Color menu to change the canvas background color (preference not currently saved). Improved handling of height change (still not perfect, think it can be made faster). Images are now cached in %APPDATA%\Minemapper, organized by world, then direction, then mode (cave, day, night, nether), then skylight, th...BlogEngine.NET: BlogEngine.NET 2.0 RC: This is a Release Candidate version for BlogEngine.NET 2.0. The most current, stable version of BlogEngine.NET is version 1.6. Find out more about the BlogEngine.NET 2.0 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation and the installation screencast. If you are upgrading from a previous version, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. As this ...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.156: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release adds a feature for aggregating the overall metrics in a folder full of NodeXL workbooks, adds geographical coordinates to the Twitter import features, and fixes a memory-related bug. See the Complete NodeXL Release History for details. Please Note: There is a new option in the setup program to install for "Just Me" or "Everyone." Most people...Wii Backup Fusion: Wii Backup Fusion 0.8.2 Beta: New in this release: - Update titles after language change - Tool tips for name/title - Transfer DVD to a specific image file - Download titles from wiitdb.com - Save Settings geometry - Titles and Cover language global in settings - Convert Files (images) to another format - Format WBFS partition - Create WBFS file - WIT path configurable in settings - Save last path in Files/Load - Sort game lists - Save column width - Sequenz of columns changeable - Set indicated columns in settings - Bus...SQL Monitor: SQL Monitor 1.3: 1. change sys.sysprocesses to DMV: http://msdn.microsoft.com/en-us/library/ms187997.aspx select * from sys.dm_exec_connections select * from sys.dm_exec_requests select * from sys.dm_exec_sessions 2. adjust columns to fit without scrollingVFPX: FoxBarcode v.0.11: FoxBarcode v.0.11 - Released 2010.11.22 FoxBarcode is a 100% Visual FoxPro class that provides a tool for generating images with different bar code symbologies to be used in VFP forms and reports, or exported to other applications. Its use and distribution is free for all Visual FoxPro Community. Whats is new? Added a third parameter to the BarcodeImage() method Fixed some minor bugs History FoxBarcode v.0.10 - Released 2010.11.19 - 85 Downloads Project page: FoxBarcodeASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3.1 and demos: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6DotSpatial: DotSpatial 11-21-2010: This release introduces the following Fixed bugs related to dispose, which caused issues when reordering layers in the legend Fixed bugs related to assigning categories where NULL values are in the fields New fast-acting resize using a bitmap "prediction" of what the final resize content will look like. ImageData.ReadBlock, ImageData.WriteBlock These allow direct file access for reading or writing a rectangular window. Bitmaps are used for holding the values. Removed the need to stor...MDownloader: MDownloader-0.15.24.6966: Fixed Updater; Fixed minor bugs;WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.1: Version: 2.0.0.1 (Milestone 1): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...Home Access Plus+: v5.4.4: Version 5.4.4Change Log: Added logic to the My Computer Browsers to allow for users with no home directories (set in ad anyhow) Renamed the My School Computer Enhanced page to My School Computer Extended Edition File Changes: ~/bin/hap.web.dll ~/clientbin/hap.silverlight.xap ~/mycomputersl.aspx.NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.01: Added new extensions for - object.CountLoopsToNull Added new extensions for DateTime: - DateTime.IsWeekend - DateTime.AddWeeks Added new extensions for string: - string.Repeat - string.IsNumeric - string.ExtractDigits - string.ConcatWith - string.ToGuid - string.ToGuidSave Added new extensions for Exception: - Exception.GetOriginalException Added new extensions for Stream: - Stream.Write (overload) And other new methods ... Release as of dotnetpro 01/2011Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-11-19: Code samples for Visual Studio 2010Prism Training Kit: Prism Training Kit 4.0: Release NotesThis is an updated version of the Prism training Kit that targets Prism 4.0 and added labs for some of the new features of Prism 4.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication MEF Navigation Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2...Free language translator and file converter: Free Language Translator 2.2: Starting with version 2.0, the translator encountered a major redesign that uses MEF based plugins and .net 4.0. I've also fixed some bugs and added support for translating subtitles that can show up in video media players. Version 2.1 shows the context menu 'Translate' in Windows Explorer on right click. Version 2.2 has links to start the media file with its associated subtitle. Download the zip file and expand it in a temporary location on your local disk. At a minimum , you should uninstal...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.4 Released: Hi, Today we are releasing Visifire 3.6.4 with few bug fixes: * Multi-line Labels were getting clipped while exploding last DataPoint in Funnel and Pyramid chart. * ClosestPlotDistance property in Axis was not behaving as expected. * In DateTime Axis, Chart threw exception on mouse click over PlotArea if there were no DataPoints present in Chart. * ToolTip was not disappearing while changing the DataSource property of the DataSeries at real-time. * Chart threw exception ...Christoc's DotNetNuke Module Development Template: 00.00.05: This release of the DotNetNuke Module Development Templates replaces the NANT scripts with MSBuild scripts. You will need to download and install the MSBuildTasks MSI file from http://msbuildtasks.tigris.org/, it's pretty straight forward without needing any sort of customization during installation. To install these templates copy the ZIP file downloaded into your My Documents\Visual Studio 2008 (or 2010)\Templates\Project Templates\C#(or VB)\Web folder (if the WEB folder doesn't exist, cre...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...New ProjectsAdventureWorks Products: This is a very simple module built for DNN 5.01.00 and up which allows you to edit some basic AdventureWorks product data. The module displays skin techniques.Amnesia: Transacts all changes to a website to facilitate automated UI testing. Queries from the automated test can also query the application database without blocking and participate in the transaction.DBA Inventory: DBA Inventory is a SQL Server based project to help inventory, manage, control, and report on a large SQL Server infrastructure without requiring agents on the target. dcorp: ?????? cmsFoldingAnalysis: Software para monitoramento de cliente folding@homeHelpSystem2010: testei2iPortal: i2i Technologies projectLucandra.NET: Lucandra.NET is a Lucene + Cassandra implementation written in C# which is based on the Lucandra (Java) project by Jake Luciani. Apache's Lucene is a high-performance full-text search engine, and Apache's Cassandra is a promising NoSQL database, originally developed by Facebook.MSBuild ConfigTransform for Visual Studio: MSbuild ConfigTransform makes transforming of config files (xml) an integrated part of your Visual Studio 2010 build action (CTRL+SHIFT+B or SHIFT+F6 or what your keyboards shortcut are set to) Provides optional fail on build on failed transformation of xml with error messagesNyx Editor: Nyx is a free, open-source game development tool aimed at making the creation and edition of levels or maps easy and enjoyable. Nyx exports level data as JSON, XML, or binary making it malleable to your own projects, engines, and needs.openfleet: This is a modular open source project to control fleets. It's a fork of the gofleet project (http://gitorious.org/gofleet).PoShRabbit: A PowerShell module to enable messaging against a Rabbit MQ server. Provides deeply integrated facilities for handling message queues and subscriptions using scripts. Enables PowerShell scripts to publish messages in Rabbit exchanges.Silverlight and WP7 Exception Handling and Logging building block: This code will help you handle and log client side exceptions in your Silverlight 4 and WP7 projects. Errors that occur in clients can be sent to your loggingservice. The service will store them. It's developed in C#, using VS2010.student admission system: this is emerson college registration system.Useful Desktop Components: Este artigo discute o uso de alguns componentes que podem ser muito úteis no dia a dia de um programador desktop como por exemplo manipulação de textos RTF, criptografias, validações, armazenamento de arquivos, validações de CPF e CNPJ, entre outros.WPF Calendar and DatePicker Themes: WPF Calendar and DatePicker ThemesWPF PropertyGrid Control: WPF PropertyGrid ControlWrix Development Kit: One development kit for internet and enterprise both.XNAPF: This project aims to create a control for integrating easily an XNA rendering in a WPF picture. xSNMP Extensions for System Center OpsMgr 2007: Developed by OpsMgr users with substantial community input, and tested extensively in implementations around the world, the xSNMP Management Pack suite is a powerful open-source SNMP monitoring implementation for Microsoft System Center Operations Manager 2007 R2 environments.

  Read the article

• CodePlex Daily Summary for Monday, December 10, 2012

  CodePlex Daily Summary for Monday, December 10, 2012Popular ReleasesMOBZcript: MOBZcript 0.9.1: First fix - typo in mobzystems.com-url!Media Companion: MediaCompanion3.511b release: Two more bug fixes: - General Preferences were not getting restored - Fanart and poster image files were being locked, preventing changes to themVodigi Open Source Interactive Digital Signage: Vodigi Release 5.5: The following enhancements and fixes are included in Vodigi 5.5. Vodigi Administrator - Manage Music Files - Add Music Files to Image Slide Shows - Manage System Messages - Display System Messages to Users During Login - Ported to Visual Studio 2012 and MVC 4 - Added New Vodigi Administrator User Guide Vodigi Player - Improved Login/Schedule Startup Procedure - Startup Using Last Known Schedule when Disconnected on Startup - Improved Check for Schedule Changes - Now Every 15 Minutes - Pla...Secretary Tool: Secretary Tool v1.1.0: I'm still considering this version a beta version because, while it seems to work well for me, I haven't received any feedback and I certainly don't want anyone relying solely on this tool for calculations and such until its correct functioning is verified by someone. This version includes several bug fixes, including a rather major one with Emergency Contact Information not saving. Also, reporting is completed. There may be some tweaking to the reporting engine, but it is good enough to rel...VidCoder: 1.4.10 Beta: Added progress percent to the title bar/task bar icon. Added MPLS information to Blu-ray titles. Fixed the following display issues in Windows 8: Uncentered text in textbox controls Disabled controls not having gray text making them hard to identify as disabled Drop-down menus having hard-to distinguish white on light-blue text Added more logging to proxy disconnect issues and increased timeout on initial call to help prevent timeouts. Fixed encoding window showing the built-in pre...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.5.0.400: Version 2.5.0.400 (Release): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Changelog Legend: [B] Breaking change; [O] Marked member as obsolete Update the documentation. InfoMan: Write the documentation. Other Downloads Downloads OverviewHome Access Plus+: v8.5: v8.5.1208.1500 This is a point release, for the other parts of HAP+ see the v8.3 release. Fixed: #me#me issue with the Edit Profile Link Updated: 8.5.1208 release Updated: Documentation with hidden booking system feature Added: Room Drop Down to the Booking System (no control panel interface), can be Resource Specific Fixed: Recursive AD Group Membership Lookup Fixed: User.IsInRole with recursive lookup Added: Group Searches to hidefrom and showto for the booking system Added: DFS Targeting ...Ynote Classic: Ynote Classic version 1.0: Ynote Classic is a text editor made by SS Corporation. It can help you write code by providing you with different codes for creation of html or batch files. You can also create C/C++ /Java files with SS Ynote Classic. Author of Ynote Classic is Samarjeet Singh. Ynote Classic is available with different themes and skins. It can also compile *.bat files into an executable file. It also has a calculator built within it. 1st version released of 6-12-12 by Samarjeet Singh. Please contact on http:...Http Explorer: httpExplorer-1.1: httpExplorer now has the ability to connect to http server via web proxies. The proxy may be explicitly specified by hostname or IP address. Or it may be specified via the Internet Options settings of Windows. You may also specify credentials to pass to the proxy if the proxy requires them. These credentials may be NTLM or basic authentication (clear text username and password).Bee OPOA Platform: Bee OPOA Demo V1.0.001: Initial version.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.78: Fix for issue #18924 - using -pretty option left in ///#DEBUG blocks. Fix for issue #18980 - bad += optimization caused bug in resulting code. Optimization has been removed pending further review.XNA GPU Particles Tool: Multi-Effect Release 20525: This version allows creating multiple effects with multiple emitters. Load, change and save particle effects. Display them in various ways to help design the effect. There are also some help pages to explain what the main settings do. This includes some preset emitter settings and a camera position for a First Person view. Source code only for XNA 4 and Visual Studio express 2010.Implementing Google Protocol Buffers using C#: Console Application: Compiled Version of the Application. The application is developed using MS.NET 4.0 run time.MB Tools: WDSMulticastMonitor V2.0: Updated version of WDSMulticast Monitor: Uses WdsTransportManger Comobject instead of WdsManager, this means that it works on servers that only have the transport role installed. Old version required the full WDS role to be installed to work. Some minor bugfixes and extra errorchecks added Added Transfererate to output, although this seems to work only sporadic. Its not a limitation of this script though, when not outputing anything in script niether is the normal wds tools.Yahoo! UI Library: YUI Compressor for .Net: Version 2.2.0.0 - Epee: New : Web Optimization package! Cleaned up the nuget packages BugFix: minifying lots of files will now be faster because of a recent regression in some code. (We were instantiating something far too many times).DtPad - .NET Framework text editor: DtPad 2.9.0.40: http://dtpad.diariotraduttore.com/files/images/flag-eng.png English + A new built-in editor for the management of CSV files, including the edit of cells, deleting and adding new rows, replacement of delimiter character and much more (issue #1137) + The limit of rows allowed before the decommissioning of their side panel has been raised (new default: 1.000) (issue #1155, only partially solved) + Pressing CTRL+TAB now DtPad opens a screen that shows the list of opened tabs (issue #1143) + Note...AvalonDock: AvalonDock 2.0.1746: Welcome to the new release of AvalonDock 2.0 This release contains a lot (lot) of bug fixes and some great improvements: Views Caching: Content of Documents and Anchorables is no more recreated everytime user move it. Autohide pane opens really fast now. Two new themes Expression (Dark and Light) and Metro (both of them still in experimental stage). If you already use AD 2.0 or plan to integrate it in your future projects, I'm interested in your ideas for new features: http://avalondock...AcDown?????: AcDown????? v4.3.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ?? v4.3.2?? ?????????????????? ??Acfun??????? ??Bilibili?????? ??Bilibili???????????? ??Bilibili????????? ??????????????? ???? ??Bilibili??????? ????32??64? Windows XP/...ExtJS based ASP.NET 2.0 Controls: FineUI v3.2.2: ??FineUI ?? ExtJS ??? ASP.NET 2.0 ???。 FineUI??? ?? No JavaScript，No CSS，No UpdatePanel，No ViewState，No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License 2.0 (Apache) ???? ??：http://fineui.com/bbs/ ??：http://fineui.com/demo/ ??：http://fineui.com/doc/ ??：http://fineui.codeplex.com/ ???? +2012-12-03 v3.2.2 -?????????????，?????button/button_menu.aspx（????）。 +?Window????Plain??；?ToolbarPosition??Footer??；?????FooterBarAlign??。 -????win...Player Framework by Microsoft: Player Framework for Windows Phone 8: This is a brand new version of the Player Framework for Windows Phone, available exclusively for Windows Phone 8, and now based upon the Player Framework for Windows 8. While this new version is not backward compatible with Windows Phone 7 (get that http://smf.codeplex.com/releases/view/88970), it does offer the same great feature set plus dozens of new features such as advertising, localization support, and improved skinning. Click here for more information about what's new in the Windows P...New ProjectsConfigMgrUI: UI for System Center Configuration Manager 2007 & 2012, System Center Orchestrator 2012 and MDT. cvn demo poject: just a test projectDelicious Notify Plugin: Lets you push a blog post straight to Delicious from Live WriterInsert Acronym Tags: Lets you insert <acronym> and <abbr> tags into your blog entry more easily.Insert File(s): Allows you to include up to three files for publishing in a post using Windows Live Writer.Insert Quick Link: Allows you to paste a link into the Writer window and have the a window similar to the one in Writer where you can change what text is to appear, open in new window, etc.ISD training tasks: ISD training examples and tasksjack1209132501: tesingjack12091327: tesingKata: Just a couple of solutions to katas found over around the web.KJFramework????(Mono Version): KJFramework????(Mono Version)Liber: The Dynamic library manager Managing Ebook and derivatives under different Tags & Properties Share Libers under PUBLIC TAGS in the LIBER Community... Libro Visual Basic 2012 spiegato a mia nonna: Tutti gli esempi del libro "Visual Basic 2012 spiegato a mia nonna". Work in progress...log4net SharePoint 2013 Appender: log4net SharePoint 2013 AppenderMethodSerializer: .NET Method Serializer DeserializerMGR.VSSolutionManager: MGR.VSSolutionManager is a tool to help to manage (update, compare, merge) Visual Studio's solution files.MIAGE IHM: BlablaPCV_Tutorial: PCV_TutorialRoll Manager: Roll Manager is a client/server application that makes it easy to create scripts with many actions that run against groups of servers. No more DOS batch scripts. It's developed in C# .NET 3.5.RootFinder: Comprehensive implementation of a 1D RootFinder framework solution - implements the full suite of bracketing and open methods, and their primitives/compoundSGF Editor: SGF Editor reads/writes .sgf files, edits Go game trees, etc. It has several useful commands for reviewing games. For searching purposes: goban, baduk, weiqi.SharePoint 365 Utilities: SharePoint 365 aims helping SharePoint developers improve the delivery time of SharePoint solutions by offering a set of utilities for DEV/Deploy/Maintenance.SNMP: ????windwos api ? WinSNMP API ??????Stock Analitator: Stock Analyzer using Relative Strength IndexTPV: TPVTrending Topic Component: This component is a final assignment of Component Based Programming in Duta Wacana Christian Univerity, Yogyakarta, IndonesiaVisual .NET RogueLike: A basic roguelike hacked out in Visual .NET. I'm unsure where I want to go with the project, so I'm just putting it out there for now.YooYoo: Personal DevelopingYou are here (for Windows Mobile): This sample shows you how to play a *.wav file on your device with Compact Framework 2.0. There is better support for playing music on Compact Framework 3.5. The idea of this sample is from this video: http://www.youtube.com/watch?v=xMcSNfrT-4MZoom.PE: PE read/write libraryZX AAA Workshop: ????????? ZX AAA Workshop ????????????? ??? ????????? ???????? ? ???? ?????????? ?????????? ZX Spectrum. ?????????????? ?????????: Specaculator, Unreal, Fuse. ??????????? ?????????? ????????? ?????? ?????????? ?????????????. ?????????? ?????? ? ??????? png, gif, bmp, tiff, jpeg.???????? ??????? ?????????? ? Visual Studio: ???????? ??????? ?????????? ? Visual Studio

  Read the article

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

• Snort's problems in generating alert from Darpa 1998 intrusion detection dataset.

  - by manofseven2

  Hi. I’m working on DARPA 1998 intrusion detection dataset. When I run snort on this dataset (outside.tcpdump file), snort don’t generate complete list of alerts. It means snort start from last few hours of tcpdump file and generate alerts about this section of file and all of packets in first hours are ignored. Another problem in generatin alert is in time stamp of generated alerts. This means when I run snort on a specific day of dataset, snort insert incorrect time stamp for that alert. The configuration and command line statement and other information about my research are: Snort version: 2.8.6 Operating system: windows XP Rule version: snortrules-snapshot-2860_s.tar.gz -———————————————————————— Command line: snort_2.8.6 c D:\programs\Snort_2.8.6\snort\etc\snort.conf -r d:\users\amir\docs\darpa\training_data\week_3\monday\outside.tcpdump -l D:\users\amir\current-task\research\thesis\snort\890230 -————————————————————————— Snort.config Hi. I'm working on DARPA 1998 intrusion detection dataset. When I run snort on this dataset (outside.tcpdump file), snort don't generate complete list of alerts. It means snort start from last few hours of tcpdump file and generate alerts about this section of file and all of packets in first hours are ignored. Another problem in generatin alert is in time stamp of generated alerts. This means when I run snort on a specific day of dataset, snort insert incorrect time stamp for that alert. The configuration and command line statement and other information about my research are: Snort version: 2.8.6 Operating system: windows XP Rule version: snortrules-snapshot-2860_s.tar.gz Command line: snort_2.8.6 -c D:\programs\Snort_2.8.6\snort\etc\snort.conf -r d:\users\amir\docs\darpa\training_data\week_3\monday\outside.tcpdump -l D:\users\amir\current-task\research\thesis\snort\890230 Snort.config # Setup the network addresses you are protecting var HOME_NET any # Set up the external network addresses. Leave as "any" in most situations var EXTERNAL_NET any # List of DNS servers on your network var DNS_SERVERS $HOME_NET # List of SMTP servers on your network var SMTP_SERVERS $HOME_NET # List of web servers on your network var HTTP_SERVERS $HOME_NET # List of sql servers on your network var SQL_SERVERS $HOME_NET # List of telnet servers on your network var TELNET_SERVERS $HOME_NET # List of ssh servers on your network var SSH_SERVERS $HOME_NET # List of ports you run web servers on portvar HTTP_PORTS [80,1220,2301,3128,7777,7779,8000,8008,8028,8080,8180,8888,9999] # List of ports you want to look for SHELLCODE on. portvar SHELLCODE_PORTS !80 # List of ports you might see oracle attacks on portvar ORACLE_PORTS 1024: # List of ports you want to look for SSH connections on: portvar SSH_PORTS 22 # other variables, these should not be modified var AIM_SERVERS [64.12.24.0/23,64.12.28.0/23,64.12.161.0/24,64.12.163.0/24,64.12.200.0/24,205.188.3.0/24,205.188.5.0/24,205.188.7.0/24,205.188.9.0/24,205.188.153.0/24,205.188.179.0/24,205.188.248.0/24] var RULE_PATH ../rules var SO_RULE_PATH ../so_rules var PREPROC_RULE_PATH ../preproc_rules # Stop generic decode events: config disable_decode_alerts # Stop Alerts on experimental TCP options config disable_tcpopt_experimental_alerts # Stop Alerts on obsolete TCP options config disable_tcpopt_obsolete_alerts # Stop Alerts on T/TCP alerts config disable_tcpopt_ttcp_alerts # Stop Alerts on all other TCPOption type events: config disable_tcpopt_alerts # Stop Alerts on invalid ip options config disable_ipopt_alerts # Alert if value in length field (IP, TCP, UDP) is greater th elength of the packet # config enable_decode_oversized_alerts # Same as above, but drop packet if in Inline mode (requires enable_decode_oversized_alerts) # config enable_decode_oversized_drops # Configure IP / TCP checksum mode config checksum_mode: all config pcre_match_limit: 1500 config pcre_match_limit_recursion: 1500 # Configure the detection engine See the Snort Manual, Configuring Snort - Includes - Config config detection: search-method ac-split search-optimize max-pattern-len 20 # Configure the event queue. For more information, see README.event_queue config event_queue: max_queue 8 log 3 order_events content_length dynamicpreprocessor directory D:\programs\Snort_2.8.6\snort\lib\snort_dynamicpreprocessor dynamicengine D:\programs\Snort_2.8.6\snort\lib\snort_dynamicengine\sf_engine.dll # path to dynamic rules libraries #dynamicdetection directory /usr/local/lib/snort_dynamicrules preprocessor frag3_global: max_frags 65536 preprocessor frag3_engine: policy windows detect_anomalies overlap_limit 10 min_fragment_length 100 timeout 180 preprocessor stream5_global: max_tcp 8192, track_tcp yes, track_udp yes, track_icmp no preprocessor stream5_tcp: policy windows, detect_anomalies, require_3whs 180, \ overlap_limit 10, small_segments 3 bytes 150, timeout 180, \ ports client 21 22 23 25 42 53 79 109 110 111 113 119 135 136 137 139 143 \ 161 445 513 514 587 593 691 1433 1521 2100 3306 6665 6666 6667 6668 6669 \ 7000 32770 32771 32772 32773 32774 32775 32776 32777 32778 32779, \ ports both 80 443 465 563 636 989 992 993 994 995 1220 2301 3128 6907 7702 7777 7779 7801 7900 7901 7902 7903 7904 7905 \ 7906 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 8000 8008 8028 8080 8180 8888 9999 preprocessor stream5_udp: timeout 180 preprocessor http_inspect: global iis_unicode_map unicode.map 1252 compress_depth 20480 decompress_depth 20480 preprocessor http_inspect_server: server default \ chunk_length 500000 \ server_flow_depth 0 \ client_flow_depth 0 \ post_depth 65495 \ oversize_dir_length 500 \ max_header_length 750 \ max_headers 100 \ ports { 80 1220 2301 3128 7777 7779 8000 8008 8028 8080 8180 8888 9999 } \ non_rfc_char { 0x00 0x01 0x02 0x03 0x04 0x05 0x06 0x07 } \ enable_cookie \ extended_response_inspection \ inspect_gzip \ apache_whitespace no \ ascii no \ bare_byte no \ directory no \ double_decode no \ iis_backslash no \ iis_delimiter no \ iis_unicode no \ multi_slash no \ non_strict \ u_encode yes \ webroot no preprocessor rpc_decode: 111 32770 32771 32772 32773 32774 32775 32776 32777 32778 32779 no_alert_multiple_requests no_alert_large_fragments no_alert_incomplete preprocessor bo preprocessor ftp_telnet: global inspection_type stateful encrypted_traffic no preprocessor ftp_telnet_protocol: telnet \ ayt_attack_thresh 20 \ normalize ports { 23 } \ detect_anomalies preprocessor ftp_telnet_protocol: ftp server default \ def_max_param_len 100 \ ports { 21 2100 3535 } \ telnet_cmds yes \ ignore_telnet_erase_cmds yes \ ftp_cmds { ABOR ACCT ADAT ALLO APPE AUTH CCC CDUP } \ ftp_cmds { CEL CLNT CMD CONF CWD DELE ENC EPRT } \ ftp_cmds { EPSV ESTA ESTP FEAT HELP LANG LIST LPRT } \ ftp_cmds { LPSV MACB MAIL MDTM MIC MKD MLSD MLST } \ ftp_cmds { MODE NLST NOOP OPTS PASS PASV PBSZ PORT } \ ftp_cmds { PROT PWD QUIT REIN REST RETR RMD RNFR } \ ftp_cmds { RNTO SDUP SITE SIZE SMNT STAT STOR STOU } \ ftp_cmds { STRU SYST TEST TYPE USER XCUP XCRC XCWD } \ ftp_cmds { XMAS XMD5 XMKD XPWD XRCP XRMD XRSQ XSEM } \ ftp_cmds { XSEN XSHA1 XSHA256 } \ alt_max_param_len 0 { ABOR CCC CDUP ESTA FEAT LPSV NOOP PASV PWD QUIT REIN STOU SYST XCUP XPWD } \ alt_max_param_len 200 { ALLO APPE CMD HELP NLST RETR RNFR STOR STOU XMKD } \ alt_max_param_len 256 { CWD RNTO } \ alt_max_param_len 400 { PORT } \ alt_max_param_len 512 { SIZE } \ chk_str_fmt { ACCT ADAT ALLO APPE AUTH CEL CLNT CMD } \ chk_str_fmt { CONF CWD DELE ENC EPRT EPSV ESTP HELP } \ chk_str_fmt { LANG LIST LPRT MACB MAIL MDTM MIC MKD } \ chk_str_fmt { MLSD MLST MODE NLST OPTS PASS PBSZ PORT } \ chk_str_fmt { PROT REST RETR RMD RNFR RNTO SDUP SITE } \ chk_str_fmt { SIZE SMNT STAT STOR STRU TEST TYPE USER } \ chk_str_fmt { XCRC XCWD XMAS XMD5 XMKD XRCP XRMD XRSQ } \ chk_str_fmt { XSEM XSEN XSHA1 XSHA256 } \ cmd_validity ALLO \ cmd_validity EPSV \ cmd_validity MACB \ cmd_validity MDTM \ cmd_validity MODE \ cmd_validity PORT \ cmd_validity PROT \ cmd_validity STRU \ cmd_validity TYPE preprocessor ftp_telnet_protocol: ftp client default \ max_resp_len 256 \ bounce yes \ ignore_telnet_erase_cmds yes \ telnet_cmds yes preprocessor smtp: ports { 25 465 587 691 } \ inspection_type stateful \ normalize cmds \ normalize_cmds { MAIL RCPT HELP HELO ETRN EHLO EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT NOOP RSET SEND SAML SOML AUTH TURN DATA QUIT ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ max_command_line_len 512 \ max_header_line_len 1000 \ max_response_line_len 512 \ alt_max_command_line_len 260 { MAIL } \ alt_max_command_line_len 300 { RCPT } \ alt_max_command_line_len 500 { HELP HELO ETRN EHLO } \ alt_max_command_line_len 255 { EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT NOOP RSET } \ alt_max_command_line_len 246 { SEND SAML SOML AUTH TURN ETRN DATA RSET QUIT ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ valid_cmds { MAIL RCPT HELP HELO ETRN EHLO EXPN VRFY ATRN SIZE BDAT DEBUG EMAL ESAM ESND ESOM EVFY IDENT NOOP RSET SEND SAML SOML AUTH TURN DATA QUIT ONEX QUEU STARTTLS TICK TIME TURNME VERB X-EXPS X-LINK2STATE XADR XAUTH XCIR XEXCH50 XGEN XLICENSE XQUE XSTA XTRN XUSR } \ xlink2state { enabled } preprocessor ssh: server_ports { 22 } \ autodetect \ max_client_bytes 19600 \ max_encrypted_packets 20 \ max_server_version_len 100 \ enable_respoverflow enable_ssh1crc32 \ enable_srvoverflow enable_protomismatch preprocessor dcerpc2: memcap 102400, events [co ] preprocessor dcerpc2_server: default, policy WinXP, \ detect [smb [139,445], tcp 135, udp 135, rpc-over-http-server 593], \ autodetect [tcp 1025:, udp 1025:, rpc-over-http-server 1025:], \ smb_max_chain 3 preprocessor dns: ports { 53 } enable_rdata_overflow preprocessor ssl: ports { 443 465 563 636 989 992 993 994 995 7801 7702 7900 7901 7902 7903 7904 7905 7906 6907 7908 7909 7910 7911 7912 7913 7914 7915 7916 7917 7918 7919 7920 }, trustservers, noinspect_encrypted # SDF sensitive data preprocessor. For more information see README.sensitive_data preprocessor sensitive_data: alert_threshold 25 output alert_full: alert.log output database: log, mysql, user=root password=123456 dbname=snort host=localhost include classification.config include reference.config include $RULE_PATH/local.rules include $RULE_PATH/attack-responses.rules include $RULE_PATH/backdoor.rules include $RULE_PATH/bad-traffic.rules include $RULE_PATH/chat.rules include $RULE_PATH/content-replace.rules include $RULE_PATH/ddos.rules include $RULE_PATH/dns.rules include $RULE_PATH/dos.rules include $RULE_PATH/exploit.rules include $RULE_PATH/finger.rules include $RULE_PATH/ftp.rules include $RULE_PATH/icmp.rules include $RULE_PATH/icmp-info.rules include $RULE_PATH/imap.rules include $RULE_PATH/info.rules include $RULE_PATH/misc.rules include $RULE_PATH/multimedia.rules include $RULE_PATH/mysql.rules include $RULE_PATH/netbios.rules include $RULE_PATH/nntp.rules include $RULE_PATH/oracle.rules include $RULE_PATH/other-ids.rules include $RULE_PATH/p2p.rules include $RULE_PATH/policy.rules include $RULE_PATH/pop2.rules include $RULE_PATH/pop3.rules include $RULE_PATH/rpc.rules include $RULE_PATH/rservices.rules include $RULE_PATH/scada.rules include $RULE_PATH/scan.rules include $RULE_PATH/shellcode.rules include $RULE_PATH/smtp.rules include $RULE_PATH/snmp.rules include $RULE_PATH/specific-threats.rules include $RULE_PATH/spyware-put.rules include $RULE_PATH/sql.rules include $RULE_PATH/telnet.rules include $RULE_PATH/tftp.rules include $RULE_PATH/virus.rules include $RULE_PATH/voip.rules include $RULE_PATH/web-activex.rules include $RULE_PATH/web-attacks.rules include $RULE_PATH/web-cgi.rules include $RULE_PATH/web-client.rules include $RULE_PATH/web-coldfusion.rules include $RULE_PATH/web-frontpage.rules include $RULE_PATH/web-iis.rules include $RULE_PATH/web-misc.rules include $RULE_PATH/web-php.rules include $RULE_PATH/x11.rules include threshold.conf -————————————————————————————- Can anyone help me to solve this problem? Thanks.

  Read the article

• video and file caching with squid lusca?

  - by moon

  hello all i have configured squid lusca on ubuntu 11.04 version and also configured the video caching but the problem is the squid cannot configure the video more than 2 min long and the file of size upto 5.xx mbs only. here is my config please guide me how can i cache the long videos and files with squid: > # PORT and Transparent Option http_port 8080 transparent server_http11 on icp_port 0 > > # Cache Directory , modify it according to your system. > # but first create directory in root by mkdir /cache1 > # and then issue this command chown proxy:proxy /cache1 > # [for ubuntu user is proxy, in Fedora user is SQUID] > # I have set 500 MB for caching reserved just for caching , > # adjust it according to your need. > # My recommendation is to have one cache_dir per drive. zzz > > #store_dir_select_algorithm round-robin cache_dir aufs /cache1 500 16 256 cache_replacement_policy heap LFUDA memory_replacement_policy heap > LFUDA > > # If you want to enable DATE time n SQUID Logs,use following emulate_httpd_log on logformat squid %tl %6tr %>a %Ss/%03Hs %<st %rm > %ru %un %Sh/%<A %mt log_fqdn off > > # How much days to keep users access web logs > # You need to rotate your log files with a cron job. For example: > # 0 0 * * * /usr/local/squid/bin/squid -k rotate logfile_rotate 14 debug_options ALL,1 cache_access_log /var/log/squid/access.log > cache_log /var/log/squid/cache.log cache_store_log > /var/log/squid/store.log > > #I used DNSAMSQ service for fast dns resolving > #so install by using "apt-get install dnsmasq" first dns_nameservers 127.0.0.1 101.11.11.5 ftp_user anonymous@ ftp_list_width 32 ftp_passive on ftp_sanitycheck on > > #ACL Section acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl > to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 # https, snews > acl SSL_ports port 873 # rsync acl Safe_ports port 80 # http acl > Safe_ports port 21 # ftp acl Safe_ports port 443 563 # https, snews > acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl > Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port > 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port > 591 # filemaker acl Safe_ports port 777 # multiling http acl > Safe_ports port 631 # cups acl Safe_ports port 873 # rsync acl > Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method > CONNECT http_access allow manager localhost http_access deny manager > http_access allow purge localhost http_access deny purge http_access > deny !Safe_ports http_access deny CONNECT !SSL_ports http_access allow > localhost http_access allow all http_reply_access allow all icp_access > allow all > > #========================== > # Administrative Parameters > #========================== > > # I used UBUNTU so user is proxy, in FEDORA you may use use squid cache_effective_user proxy cache_effective_group proxy cache_mgr > [email protected] visible_hostname proxy.aacable.net unique_hostname > [email protected] > > #============= > # ACCELERATOR > #============= half_closed_clients off quick_abort_min 0 KB quick_abort_max 0 KB vary_ignore_expire on reload_into_ims on log_fqdn > off memory_pools off > > # If you want to hide your proxy machine from being detected at various site use following via off > > #============================================ > # OPTIONS WHICH AFFECT THE CACHE SIZE / zaib > #============================================ > # If you have 4GB memory in Squid box, we will use formula of 1/3 > # You can adjust it according to your need. IF squid is taking too much of RAM > # Then decrease it to 128 MB or even less. > > cache_mem 256 MB minimum_object_size 512 bytes maximum_object_size 500 > MB maximum_object_size_in_memory 128 KB > > #============================================================$ > # SNMP , if you want to generate graphs for SQUID via MRTG > #============================================================$ > #acl snmppublic snmp_community gl > #snmp_port 3401 > #snmp_access allow snmppublic all > #snmp_access allow all > > #============================================================ > # ZPH , To enable cache content to be delivered at full lan speed, > # To bypass the queue at MT. > #============================================================ tcp_outgoing_tos 0x30 all zph_mode tos zph_local 0x30 zph_parent 0 > zph_option 136 > > # Caching Youtube acl videocache_allow_url url_regex -i \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.com\/videoplayback \.youtube\.com\/videoplay > \.youtube\.com\/get_video\? acl videocache_allow_url url_regex -i > \.youtube\.[a-z][a-z]\/videoplayback \.youtube\.[a-z][a-z]\/videoplay > \.youtube\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i \.googlevideo\.com\/videoplayback \.googlevideo\.com\/videoplay \.googlevideo\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.com\/videoplayback \.google\.com\/videoplay > \.google\.com\/get_video\? acl videocache_allow_url url_regex -i > \.google\.[a-z][a-z]\/videoplayback \.google\.[a-z][a-z]\/videoplay > \.google\.[a-z][a-z]\/get_video\? acl videocache_allow_url url_regex > -i proxy[a-z0-9\-][a-z0-9][a-z0-9][a-z0-9]?\.dailymotion\.com\/ acl videocache_allow_url url_regex -i vid\.akm\.dailymotion\.com\/ acl > videocache_allow_url url_regex -i > [a-z0-9][0-9a-z][0-9a-z]?[0-9a-z]?[0-9a-z]?\.xtube\.com\/(.*)flv acl > videocache_allow_url url_regex -i \.vimeo\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i > va\.wrzuta\.pl\/wa[0-9][0-9][0-9][0-9]? acl videocache_allow_url > url_regex -i \.youporn\.com\/(.*)\.flv acl videocache_allow_url > url_regex -i \.msn\.com\.edgesuite\.net\/(.*)\.flv acl > videocache_allow_url url_regex -i \.tube8\.com\/(.*)\.(flv|3gp) acl > videocache_allow_url url_regex -i \.mais\.uol\.com\.br\/(.*)\.flv acl > videocache_allow_url url_regex -i > \.blip\.tv\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i > \.apniisp\.com\/(.*)\.(flv|avi|mov|mp3|m4v|mp4|wmv|rm|ram|m4v) acl > videocache_allow_url url_regex -i \.break\.com\/(.*)\.(flv|mp4) acl > videocache_allow_url url_regex -i redtube\.com\/(.*)\.flv acl > videocache_allow_dom dstdomain .mccont.com .metacafe.com > .cdn.dailymotion.com acl videocache_deny_dom dstdomain > .download.youporn.com .static.blip.tv acl dontrewrite url_regex > redbot\.org \.php acl getmethod method GET > > storeurl_access deny dontrewrite storeurl_access deny !getmethod > storeurl_access deny videocache_deny_dom storeurl_access allow > videocache_allow_url storeurl_access allow videocache_allow_dom > storeurl_access deny all > > storeurl_rewrite_program /etc/squid/storeurl.pl > storeurl_rewrite_children 7 storeurl_rewrite_concurrency 10 > > acl store_rewrite_list urlpath_regex -i > \/(get_video\?|videodownload\?|videoplayback.*id) acl > store_rewrite_list urlpath_regex -i \.flv$ \.mp3$ \.mp4$ \.swf$ \ > storeurl_access allow store_rewrite_list storeurl_access deny all > > refresh_pattern -i \.flv$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.mp3$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.mp4$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.swf$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.gif$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth refresh_pattern -i \.jpg$ > 10080 80% 10080 override-expire override-lastmod reload-into-ims > ignore-reload ignore-no-cache ignore-private ignore-auth > refresh_pattern -i \.jpeg$ 10080 80% 10080 override-expire > override-lastmod reload-into-ims ignore-reload ignore-no-cache > ignore-private ignore-auth refresh_pattern -i \.exe$ 10080 80% 10080 > override-expire override-lastmod reload-into-ims ignore-reload > ignore-no-cache ignore-private ignore-auth > > # 1 year = 525600 mins, 1 month = 10080 mins, 1 day = 1440 refresh_pattern (get_video\?|videoplayback\?|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern > (get_video\?|videoplayback\?id|videoplayback.*id|videodownload\?|\.flv?) > 10080 80% 10080 ignore-no-cache ignore-private override-expire > override-lastmod reload-into-ims refresh_pattern \.(ico|video-stats) > 10080 80% 10080 override-expire ignore-reload ignore-no-cache > ignore-private ignore-auth override-lastmod negative-ttl=10080 > refresh_pattern \.etology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern galleries\.video(\?|sz) 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern brazzers\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern \.adtology\? 10080 > 80% 10080 override-expire ignore-reload ignore-no-cache > refresh_pattern > ^.*(utm\.gif|ads\?|rmxads\.com|ad\.z5x\.net|bh\.contextweb\.com|bstats\.adbrite\.com|a1\.interclick\.com|ad\.trafficmp\.com|ads\.cubics\.com|ad\.xtendmedia\.com|\.googlesyndication\.com|advertising\.com|yieldmanager|game-advertising\.com|pixel\.quantserve\.com|adperium\.com|doubleclick\.net|adserving\.cpxinteractive\.com|syndication\.com|media.fastclick.net).* > 10080 20% 10080 ignore-no-cache ignore-private override-expire > ignore-reload ignore-auth negative-ttl=40320 max-stale=10 > refresh_pattern ^.*safebrowsing.*google 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth negative-ttl=10080 refresh_pattern > ^http://((cbk|mt|khm|mlt)[0-9]?)\.google\.co(m|\.uk) 10080 80% > 10080 override-expire ignore-reload ignore-private negative-ttl=10080 > refresh_pattern ytimg\.com.*\.jpg > 10080 80% 10080 override-expire ignore-reload refresh_pattern > images\.friendster\.com.*\.(png|gif) 10080 80% > 10080 override-expire ignore-reload refresh_pattern garena\.com > 10080 80% 10080 override-expire reload-into-ims refresh_pattern > photobucket.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 override-expire ignore-reload refresh_pattern > vid\.akm\.dailymotion\.com.*\.on2\? 10080 80% > 10080 ignore-no-cache override-expire override-lastmod refresh_pattern > mediafire.com\/images.*\.(jp(e?g|e|2)|tiff?|bmp|gif|png) 10080 80% > 10080 reload-into-ims override-expire ignore-private refresh_pattern > ^http:\/\/images|pics|thumbs[0-9]\. 10080 80% > 10080 reload-into-ims ignore-no-cache ignore-reload override-expire > refresh_pattern ^http:\/\/www.onemanga.com.*\/ > 10080 80% 10080 reload-into-ims ignore-no-cache ignore-reload > override-expire refresh_pattern > ^http://v\.okezone\.com/get_video\/([a-zA-Z0-9]) 10080 80% 10080 > override-expire ignore-reload ignore-no-cache ignore-private > ignore-auth override-lastmod negative-ttl=10080 > > #images facebook refresh_pattern -i \.facebook.com.*\.(jpg|png|gif) 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern -i \.fbcdn.net.*\.(jpg|gif|png|swf|mp3) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern static\.ak\.fbcdn\.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > refresh_pattern ^http:\/\/profile\.ak\.fbcdn.net*\.(jpg|gif|png) > 10080 80% 10080 ignore-reload override-expire ignore-no-cache > > #All File refresh_pattern -i \.(3gp|7z|ace|asx|bin|deb|divx|dvr-ms|ram|rpm|exe|inc|cab|qt) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(rar|jar|gz|tgz|bz2|iso|m1v|m2(v|p)|mo(d|v)|arj|lha|lzh|zip|tar) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(jp(e?g|e|2)|gif|pn[pg]|bm?|tiff?|ico|swf|dat|ad|txt|dll) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(avi|ac4|mp(e?g|a|e|1|2|3|4)|mk(a|v)|ms(i|u|p)|og(x|v|a|g)|rm|r(a|p)m|snd|vob) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims refresh_pattern -i > \.(pp(t?x)|s|t)|pdf|rtf|wax|wm(a|v)|wmx|wpl|cb(r|z|t)|xl(s?x)|do(c?x)|flv|x-flv) > 10080 80% 10080 ignore-no-cache override-expire override-lastmod > reload-into-ims > > refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern ^gopher: > 1440 0% 1440 refresh_pattern ^ftp: 10080 95% 10080 > override-lastmod reload-into-ims refresh_pattern . 1440 > 95% 10080 override-lastmod reload-into-ims

  Read the article

• Linux Mint 10 LXDE computer to act as LTSP Server without luck

  - by Rautamiekka

  So I've tried to make our screen-broken HP laptop to also serve as LTSP Server in addition to various other tasks, without luck, which may be cuz I'm running LM10 LXDE while the instructions are for Ubuntu. Excuse my ignorance. The entire output from Terminal after installing LTSP stuff along with a Server kernel and a load of other packages: administrator@rauta-mint-turion ~ $ sudo lt ltrace ltsp-build-client ltsp-chroot ltspfs ltspfsmounter ltsp-info ltsp-localapps ltsp-update-image ltsp-update-kernels ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-update-kernels find: `/opt/ltsp/': No such file or directory administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo ltsp-update-image Cannot determine assigned port. Assigning to port 2000. mkdir: cannot create directory `/opt/ltsp/i386/etc/ltsp': No such file or directory /usr/sbin/ltsp-update-image: 274: cannot create /opt/ltsp/i386/etc/ltsp/update-kernels.conf: Directory nonexistent /usr/sbin/ltsp-update-image: 274: cannot create /opt/ltsp/i386/etc/ltsp/update-kernels.conf: Directory nonexistent Regenerating kernel... chroot: failed to run command `/usr/share/ltsp/update-kernels': No such file or directory Done. Configuring inetd... Done. Updating pxelinux default configuration...Done. Skipping invalid chroot: /opt/ltsp/i386 chroot: failed to run command `test': No such file or directory administrator@rauta-mint-turion ~ $ sudo ltsp-chroot chroot: failed to run command `/bin/bash': No such file or directory administrator@rauta-mint-turion ~ $ bash administrator@rauta-mint-turion ~ $ exit exit administrator@rauta-mint-turion ~ $ sudo ls /opt/ltsp i386 administrator@rauta-mint-turion ~ $ sudo ls /opt/ltsp/i386/ administrator@rauta-mint-turion ~ $ sudo ltsp-build-client NOTE: Root directory /opt/ltsp/i386 already exists, this will lead to problems, please remove it before trying again. Exiting. error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo rm -rv /opt/ltsp/i386 removed directory: `/opt/ltsp/i386' administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ aptitude search ltsp p fts-ltsp-ldap - LDAP LTSP module for the TFTP/Fuse supplicant p ltsp-client - LTSP client environment p ltsp-client-core - LTSP client environment (core) p ltsp-cluster-accountmanager - Account creation and management daemon for LTSP p ltsp-cluster-control - Web based thin-client configuration management p ltsp-cluster-lbagent - LTSP loadbalancer agent offers variables about the state of the ltsp server p ltsp-cluster-lbserver - LTSP loadbalancer server returns the optimal ltsp server to terminal p ltsp-cluster-nxloadbalancer - Minimal NX loadbalancer for ltsp-cluster p ltsp-cluster-pxeconfig - LTSP-Cluster symlink generator p ltsp-controlaula - Classroom management tool with ltsp clients p ltsp-docs - LTSP Documentation p ltsp-livecd - starts an LTSP live server on an Ubuntu livecd session p ltsp-manager - Ubuntu LTSP server management GUI i A ltsp-server - Basic LTSP server environment i ltsp-server-standalone - Complete LTSP server environment i A ltspfs - Fuse based remote filesystem for LTSP thin clients p ltspfsd - Fuse based remote filesystem hooks for LTSP thin clients p ltspfsd-core - Fuse based remote filesystem daemon for LTSP thin clients p python-ltsp - provides ltsp related functions administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp-server ltsp-server-standalone ltspfs The following packages will be REMOVED: debconf-utils{u} debootstrap{u} dhcp3-server{u} gstreamer0.10-pulseaudio{u} ldm-server{u} libpulse-browse0{u} ltsp-server{p} ltsp-server-standalone{p} ltspfs{p} nbd-server{u} openbsd-inetd{u} pulseaudio{u} pulseaudio-esound-compat{u} pulseaudio-module-x11{u} pulseaudio-utils{u} squashfs-tools{u} tftpd-hpa{u} 0 packages upgraded, 0 newly installed, 17 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 6,996kB will be freed. Do you want to continue? [Y/n/?] (Reading database ... 158454 files and directories currently installed.) Removing ltsp-server-standalone ... Purging configuration files for ltsp-server-standalone ... Removing ltsp-server ... Purging configuration files for ltsp-server ... dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot/ltsp' not empty so not removed. dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot' not empty so not removed. Processing triggers for man-db ... (Reading database ... 158195 files and directories currently installed.) Removing debconf-utils ... Removing debootstrap ... Removing dhcp3-server ... * Stopping DHCP server dhcpd3 [ OK ] Removing gstreamer0.10-pulseaudio ... Removing ldm-server ... Removing pulseaudio-module-x11 ... Removing pulseaudio-esound-compat ... Removing pulseaudio ... * PulseAudio configured for per-user sessions Removing pulseaudio-utils ... Removing libpulse-browse0 ... Processing triggers for man-db ... Processing triggers for ureadahead ... ureadahead will be reprofiled on next reboot Processing triggers for libc-bin ... ldconfig deferred processing now taking place (Reading database ... 157944 files and directories currently installed.) Removing ltspfs ... Processing triggers for man-db ... (Reading database ... 157932 files and directories currently installed.) Removing nbd-server ... Stopping Network Block Device server: nbd-server. Removing openbsd-inetd ... * Stopping internet superserver inetd [ OK ] Removing squashfs-tools ... Removing tftpd-hpa ... tftpd-hpa stop/waiting Processing triggers for ureadahead ... Processing triggers for man-db ... administrator@rauta-mint-turion ~ $ sudo aptitude purge ~c The following packages will be REMOVED: dhcp3-server{p} libpulse-browse0{p} nbd-server{p} openbsd-inetd{p} pulseaudio{p} tftpd-hpa{p} 0 packages upgraded, 0 newly installed, 6 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Do you want to continue? [Y/n/?] (Reading database ... 157881 files and directories currently installed.) Removing dhcp3-server ... Purging configuration files for dhcp3-server ... Removing libpulse-browse0 ... Purging configuration files for libpulse-browse0 ... Removing nbd-server ... Purging configuration files for nbd-server ... Removing openbsd-inetd ... Purging configuration files for openbsd-inetd ... Removing pulseaudio ... Purging configuration files for pulseaudio ... Removing tftpd-hpa ... Purging configuration files for tftpd-hpa ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo aptitude install ltsp-server-standalone The following NEW packages will be installed: debconf-utils{a} debootstrap{a} ldm-server{a} ltsp-server{a} ltsp-server-standalone ltspfs{a} nbd-server{a} openbsd-inetd{a} squashfs-tools{a} The following packages are RECOMMENDED but will NOT be installed: dhcp3-server pulseaudio-esound-compat tftpd-hpa 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/498kB of archives. After unpacking 2,437kB will be used. Do you want to continue? [Y/n/?] Preconfiguring packages ... Selecting previously deselected package openbsd-inetd. (Reading database ... 157868 files and directories currently installed.) Unpacking openbsd-inetd (from .../openbsd-inetd_0.20080125-4ubuntu2_i386.deb) ... Processing triggers for man-db ... Processing triggers for ureadahead ... Setting up openbsd-inetd (0.20080125-4ubuntu2) ... * Stopping internet superserver inetd [ OK ] * Starting internet superserver inetd [ OK ] Selecting previously deselected package ldm-server. (Reading database ... 157877 files and directories currently installed.) Unpacking ldm-server (from .../ldm-server_2%3a2.1.3-0ubuntu1_all.deb) ... Selecting previously deselected package debconf-utils. Unpacking debconf-utils (from .../debconf-utils_1.5.32ubuntu3_all.deb) ... Selecting previously deselected package debootstrap. Unpacking debootstrap (from .../debootstrap_1.0.23ubuntu1_all.deb) ... Selecting previously deselected package nbd-server. Unpacking nbd-server (from .../nbd-server_1%3a2.9.14-2ubuntu1_i386.deb) ... Selecting previously deselected package squashfs-tools. Unpacking squashfs-tools (from .../squashfs-tools_1%3a4.0-8_i386.deb) ... Selecting previously deselected package ltsp-server. GNU nano 2.2.4 File: /etc/ltsp/ltsp-update-image.conf # Configuration file for ltsp-update-image # By default, do not compress the image # as it's reported to make it unstable NO_COMP="-noF -noD -noI -no-exports" [ Switched to /etc/ltsp/ltsp-update-image.conf ] administrator@rauta-mint-turion ~ $ ls /opt/ firefox/ ltsp/ mint-flashplugin/ administrator@rauta-mint-turion ~ $ ls /opt/ltsp/i386/ administrator@rauta-mint-turion ~ $ ls /opt/ltsp/ i386 administrator@rauta-mint-turion ~ $ sudo ltsp ltsp-build-client ltsp-chroot ltspfs ltspfsmounter ltsp-info ltsp-localapps ltsp-update-image ltsp-update-kernels ltsp-update-sshkeys administrator@rauta-mint-turion ~ $ sudo ltsp-build-client NOTE: Root directory /opt/ltsp/i386 already exists, this will lead to problems, please remove it before trying again. Exiting. error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ ^C administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp ltspfs ltsp-server ltsp-server-standalone administrator@rauta-mint-turion ~ $ sudo aptitude purge ltsp-server The following packages will be REMOVED: ltsp-server{p} 0 packages upgraded, 0 newly installed, 1 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 1,073kB will be freed. The following packages have unmet dependencies: ltsp-server-standalone: Depends: ltsp-server but it is not going to be installed. The following actions will resolve these dependencies: Remove the following packages: 1) ltsp-server-standalone Accept this solution? [Y/n/q/?] The following packages will be REMOVED: debconf-utils{u} debootstrap{u} ldm-server{u} ltsp-server{p} ltsp-server-standalone{a} ltspfs{u} nbd-server{u} openbsd-inetd{u} squashfs-tools{u} 0 packages upgraded, 0 newly installed, 9 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 2,437kB will be freed. Do you want to continue? [Y/n/?] (Reading database ... 158244 files and directories currently installed.) Removing ltsp-server-standalone ... (Reading database ... 158240 files and directories currently installed.) Removing ltsp-server ... Purging configuration files for ltsp-server ... dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot/ltsp' not empty so not removed. dpkg: warning: while removing ltsp-server, directory '/var/lib/tftpboot' not empty so not removed. Processing triggers for man-db ... (Reading database ... 157987 files and directories currently installed.) Removing debconf-utils ... Removing debootstrap ... Removing ldm-server ... Removing ltspfs ... Removing nbd-server ... Stopping Network Block Device server: nbd-server. Removing openbsd-inetd ... * Stopping internet superserver inetd [ OK ] Removing squashfs-tools ... Processing triggers for man-db ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo aptitude purge ~c The following packages will be REMOVED: ltsp-server-standalone{p} nbd-server{p} openbsd-inetd{p} 0 packages upgraded, 0 newly installed, 3 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Do you want to continue? [Y/n/?] (Reading database ... 157871 files and directories currently installed.) Removing ltsp-server-standalone ... Purging configuration files for ltsp-server-standalone ... Removing nbd-server ... Purging configuration files for nbd-server ... Removing openbsd-inetd ... Purging configuration files for openbsd-inetd ... Processing triggers for ureadahead ... administrator@rauta-mint-turion ~ $ sudo rm -rv /var/lib/t teamspeak-server/ tftpboot/ transmission-daemon/ administrator@rauta-mint-turion ~ $ sudo rm -rv /var/lib/tftpboot removed `/var/lib/tftpboot/ltsp/i386/pxelinux.cfg/default' removed directory: `/var/lib/tftpboot/ltsp/i386/pxelinux.cfg' removed directory: `/var/lib/tftpboot/ltsp/i386' removed directory: `/var/lib/tftpboot/ltsp' removed directory: `/var/lib/tftpboot' administrator@rauta-mint-turion ~ $ sudo find / -name "ltsp" /opt/ltsp administrator@rauta-mint-turion ~ $ sudo rm -rv /opt/ltsp removed directory: `/opt/ltsp/i386' removed directory: `/opt/ltsp' administrator@rauta-mint-turion ~ $ sudo aptitude install ltsp-server-standalone The following NEW packages will be installed: debconf-utils{a} debootstrap{a} ldm-server{a} ltsp-server{a} ltsp-server-standalone ltspfs{a} nbd-server{a} openbsd-inetd{a} squashfs-tools{a} The following packages are RECOMMENDED but will NOT be installed: dhcp3-server pulseaudio-esound-compat tftpd-hpa 0 packages upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/498kB of archives. After unpacking 2,437kB will be used. Do you want to continue? [Y/n/?] Preconfiguring packages ... Selecting previously deselected package openbsd-inetd. (Reading database ... 157868 files and directories currently installed.) Unpacking openbsd-inetd (from .../openbsd-inetd_0.20080125-4ubuntu2_i386.deb) ... Processing triggers for man-db ... GNU nano 2.2.4 New Buffer GNU nano 2.2.4 File: /etc/ltsp/dhcpd.conf # # Default LTSP dhcpd.conf config file. # authoritative; subnet 192.168.2.0 netmask 255.255.255.0 { range 192.168.2.70 192.168.2.79; option domain-name "jarvinen"; option domain-name-servers 192.168.2.254; option broadcast-address 192.168.2.255; option routers 192.168.2.254; # next-server 192.168.0.1; # get-lease-hostnames true; option subnet-mask 255.255.255.0; option root-path "/opt/ltsp/i386"; if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" { filename "/ltsp/i386/pxelinux.0"; } else { filename "/ltsp/i386/nbi.img"; } } [ Wrote 22 lines ] administrator@rauta-mint-turion ~ $ sudo service dhcp3-server start * Starting DHCP server dhcpd3 [ OK ] administrator@rauta-mint-turion ~ $ sudo ltsp-build-client /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging: line 3: /opt/ltsp/i386/etc/ltsp_chroot: No such file or directory error: LTSP client installation ended abnormally administrator@rauta-mint-turion ~ $ sudo cat /usr/share/ltsp/plugins/ltsp-build-client/common/010-chroot-tagging case "$MODE" in after-install) echo LTSP_CHROOT=$ROOT >> $ROOT/etc/ltsp_chroot ;; esac administrator@rauta-mint-turion ~ $ cd $ROOT/etc/ltsp_chroot bash: cd: /etc/ltsp_chroot: No such file or directory administrator@rauta-mint-turion ~ $ cd $ROOT/etc/ administrator@rauta-mint-turion /etc $ ls acpi chatscripts emacs group insserv.conf.d logrotate.conf mysql php5 rc6.d smbnetfs.conf UPower adduser.conf ConsoleKit environment group- iproute2 logrotate.d nanorc phpmyadmin rc.local snmp usb_modeswitch.conf alternatives console-setup esound grub.d issue lsb-base nbd-server pm rcS.d sound usb_modeswitch.d anacrontab cron.d firefox gshadow issue.net lsb-base-logging.sh ndiswrapper pnm2ppa.conf request-key.conf ssh ushare.conf apache2 cron.daily firefox-3.5 gshadow- java lsb-release netscsid.conf polkit-1 resolvconf ssl vga apm cron.hourly firestarter gtk-2.0 java-6-sun ltrace.conf network popularity-contest.conf resolv.conf sudoers vim apparmor cron.monthly fonts gtkmathview kbd ltsp NetworkManager ppp rmt sudoers.d vlc apparmor.d crontab foomatic gufw kernel lxdm networks printcap rpc su-to-rootrc vsftpd.conf apport cron.weekly fstab hal kernel-img.conf magic nsswitch.conf profile rsyslog.conf sweeprc w3m apt crypttab ftpusers hdparm.conf kerneloops.conf magic.mime ntp.conf profile.d rsyslog.d sysctl.conf wgetrc at.deny cups fuse.conf host.conf kompozer mailcap obex-data-server protocols samba sysctl.d wildmidi auto-apt dbconfig-common gai.conf hostname ldap mailcap.order ODBCDataSources psiconv sane.d teamspeak-server wodim.conf avahi dbus-1 gamin hosts ld.so.cache manpath.config odbc.ini pulse screenrc terminfo wpa_supplicant bash.bashrc debconf.conf gconf hosts.allow ld.so.conf menu openal purple securetty thunderbird X11 bash_completion debian_version gdb hosts.deny ld.so.conf.d menu-methods openoffice python security timezone xdg bash_completion.d default gdm hp legal mime.types opt python2.6 sensors3.conf transmission-daemon xml bindresvport.blacklist defoma ghostscript ifplugd lftp.conf mke2fs.conf pam.conf python2.7 sensors.d ts.conf xulrunner-1.9.2 blkid.conf deluser.conf gimp inetd.conf libpaper.d modprobe.d pam.d python3.1 services ucf.conf zsh_command_not_found blkid.tab depmod.d gnome init libreoffice modules pango rc0.d sgml udev bluetooth dhcp gnome-system-tools init.d linuxmint motd papersize rc1.d shadow ufw bonobo-activation dhcp3 gnome-vfs-2.0 initramfs-tools locale.alias mplayer passwd rc2.d shadow- updatedb.conf ca-certificates dictionaries-common gnome-vfs-mime-magic inputrc localtime mtab passwd- rc3.d shells update-manager ca-certificates.conf doc-base gre.d insserv logcheck mtab.fuselock pcmcia rc4.d skel update-motd.d calendar dpkg groff insserv.conf login.defs mtools.conf perl rc5.d smb2www update-notifier administrator@rauta-mint-turion /etc $ cd ltsp/ administrator@rauta-mint-turion /etc/ltsp $ ls dhcpd.conf ltsp-update-image.conf administrator@rauta-mint-turion /etc/ltsp $ cat dhcpd.conf # # Default LTSP dhcpd.conf config file. # authoritative; subnet 192.168.2.0 netmask 255.255.255.0 { range 192.168.2.70 192.168.2.79; option domain-name "jarvinen"; option domain-name-servers 192.168.2.254; option broadcast-address 192.168.2.255; option routers 192.168.2.254; # next-server 192.168.0.1; # get-lease-hostnames true; option subnet-mask 255.255.255.0; option root-path "/opt/ltsp/i386"; if substring( option vendor-class-identifier, 0, 9 ) = "PXEClient" { filename "/ltsp/i386/pxelinux.0"; } else { filename "/ltsp/i386/nbi.img"; } } administrator@rauta-mint-turion /etc/ltsp $

  Read the article

< Previous Page | 11 12 13 14 15