Search Results

Search found 5390 results on 216 pages for 'ssl vpn'.

Page 15/216 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Windows VPN not authenticating from ADSL to Wireless link

  - by deanvz

  I have a normal windows VPN on a computer connecting to a 196.201.x.x/24 IP. If this VPN tries to connect from any address in the 41.x.x.x range it cant get there. The server is a normal windows 2008 server, running exchange with a PPPoE IP natted to a public IP on the public gateway of the wireless network as the server is on site and its connectivity is derived from Mikrotik RB's. The computer on the 41 range can traceroute and ping the server, but the VPN does not authenticate. When on the network or any other, the VPN works fine. Is there something that could be configured on the VPN client? All firewall settings of a standard ADSL router have been checked and found to block only ICMP's. Is this a VPN configuration problem or a network issue?

  Read the article

• Multiple SSL on same IP [closed]

  - by kadourah

  Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have the following situation: first domain: test.domain.com IP: 1.2.3.4 Port: 443 SSL: Purchased from godaddy and specific to that domain Works fine no issues. I would like to add another site: test2.domain.com IP: the same Port: can be different SSL: different since I can't use the SSL above because it's specific to the site above. Now, when I add the HTTPS binding to the second site with IP:Port combination it appears to always load the first SSL ignoring the second certificate. How can I add second SSL binding to the same IP using a "different" certificate? Can this be done?

  Read the article

• a couple of questions about proxy server,vpn & how they works

  - by Q8Y

  I have a couple of questions that are related to security. Correct me if i'm wrong :) If I want to request something (ex: visiting www.google.com): my computer will request that then it will to the ISP then to my ISP proxy server that will take the request and act as a middle man in this situation ask for the site (www.google.com) and retrieve it then the proxy will send it back to me. I know that its being done like that. So, my question is that, in this situation my ISP knows everything and what I did request, and the proxy server is set by default (when I ask for an internet subscription). So, if I use here another proxy (lets assume that is a highly anonymous and my ISP can't detect my IP address from it), would I visit my ISP and then from my ISP it will redirect me to the new proxy server that I provide? Will it know that there is someone using another proxy? Or will it go to another network rather than my ISP? Because I didn't get the view clearly. This question is related to the first one. When I use a VPN, I know that VPN provides for me a tunneling, encryption and much more features that a proxy can't. So my data is travelling securely and my ISP can't know what I'm doing. But my questions are: From where is the tunneling started? Does it start after I visit the ISP network (since they are the one that are responsible for forwarding my data and requests)? If so, then not all my connection is tunneled in this way, there is a part that is not being tunneled. Since, every time I need to do anything I have to go to my ISP and ask to do that. Correct me if I misunderstand this. I know that VPN can let my computer be virtually in another place and access its resources (ex: be like in my office while I'm in my home. This is done via VPN). If I use a VPN service provider so that I can access the internet securely and without being monitored by my ISP. In this case, where is my encrypted data saved? Is it saved in my ISP or in the VPN service provider? If I use a VPN, does anyone on the internet know what I'm doing or who I am? Even the VPN service provider? Can they know me? I think they should know the person that is asking for this VPN service, am I right?

  Read the article

• Windows VPN - NO internet access

  - by sharru

  I host a network of servers behind a Fortigate 200a firewall in the DC. I connect to those servers via a VPN connection. The problem is that when i connect to the VPN, I lose my internet connection on the local PC (windows 7). I would like to be connected to the VPN and still surf the web. i guess this means to only forward a range of ip to the VPN connection. I've read other answers on serverfault, talking about "un-check the 'Use default gateway on remote network' option in your Windows 7 PPTP network connection settings". When i do that , i get internet access but no access to the servers in the VPN. Any idea how to get both working? Should i change something on the fortigate 200a config? Do i need two networks cards? Is there a place in windows to define ip range for the vpn connection?

  Read the article

• Configure browser and VPN traffic

  - by Zachzor

  Hello everyone. I've been having a few issues with my company's VPN server. The VPN is running on a Mac Server (10.6.x) and I'm also using a Macbook (10.6.5). I've been building specific programs to gather information from IPs, and to work on this while I'm at home I need to go through our VPN to access the network. Unless I send all traffic over VPN, I'm not able to hit those specific IPs. However, I'm unable to access the internet through my web browser when I send all my traffic over VPN. I was wondering if there was a way (besides setting up a split tunnel) that I could set up a web browser to go through my current wireless connection, as opposed to going through the VPN like the rest of my applications. Wether the browser be Chrome, Firefox, or Safari doesn't matter to me. Anyone else run into this issue and find a clever way to solve it? Thank you!

  Read the article

• Access Windows VPN DNS from Ubuntu

  - by user46427

  I am using Ubuntu 10.04 to access a Windows VPN. I connect to the VPN from Ubuntu, and when I open a Windows 7 virtual machine (VirtualBox), everything works great ... I can access local network drives, ping local servers, remote into local machines, etc. However, I can do none of this from Ubuntu. With the VPN connected, I cannot even ping anything within the VPN local network. I'm guessing it's a DNS issue that Windows is handling automatically but Ubuntu needs a setting somewhere to tell it to use the DNS servers of the VPN network? Any ideas? I'm a relative novice to Ubuntu, esp. VPN in Ubuntu. [EDIT] Actually, I'm almost positive it is DNS, because if I get the IP address from the Windows VM I can use Terminal Server Client to remote into a machine.

  Read the article

• Can't resolve Mac's machine name on VPN

  - by Raghuveer

  My mac'c machine name is something like this: hostname.company.com but whenever I connect to VPN, it becomes something like vpn-xxxx.company.com where xxxx are some random numbers. Because of this, some of my scripts which are dependent on host name gets blocked. We use the standard mac's vpn setup which comes with OS X Lion (under network preferences). How can I resolve to the correct mac's name even if I am on vpn ? That is even if I am connected to VPN, my machine name should resolve to hostname.company.com and NOT to vpn-xxxx.company.com. Any suggestions would be really appreciated.

  Read the article

• How to connect to VPN using commands in Linux (Fedora 16)

  - by WarFox

  Usually, I use the network connections icon on the top bar to connect to VPN. The connection is configured properly and it connects well. Configuration screen shot is given below. As you can see I have selected the 'Connect automatically' option. But this option doesn't help in connecting to VPN automatically upon login. This is my university VPN and it uses 'Point-to-Point encryption (MPPE)' for authentication I need to connect to the VPN using command line, so that I can write a script and run it at start up, so the connection is automatically established every time I login. This will also help in connecting to VPN when I login from 'init 3' mode. I depend on this VPN connection for my internet access. Please help me with the required commands.

  Read the article

• Server 2012r2 VPN DNS

  - by Tyron Gower

  Have an issue where onsite clients cannot resolve VPNusers. but VPN users can resolve onsite machines. example. USER! uses LAPTOP1 USER1 connects to VPN gets internal IP address of 10.243.0.200 USER1 pings SERVER1 - resolve to ip and gets reply USER1 RDP into SERVER1 (inside VPN) USER1 pings LAPTOP1 from SERVER1 resolves to ip address last assigned by DHCP (10.243.0.139) ping fails USER1 pings 10.243.0.200 from SERVER1 gets reply. Running Server 2012r2 It is a domain controller, DNS and VPN server. VPN is just configured with basic default settings. All VPN users have static IP setup in AD. Not sure where to go from here.

  Read the article

• How to make a backup VPN server?

  - by akalenuk

  I have a small VPN network with a bunch of clients working mostly with each other and a VPN server. Everything works fine, except, obviously I can't shut VPN server down without breaking the network. I have a spare machine, which worked as an VPN server for the same network before so it is signed with the same SA as the first one and basically configured just the same as the first one. Technically I can make my clients work with it with little adjustment (by setting remote in etc/openpvn/clientx.conf), but it would be great make this switch automated. So basically I want two VPN servers running in the same network to work completely interchangeable without clients even knowing this. Can I do this with VPN or should I dig deeper into physical network layer?

  Read the article

• Client-side policy error using JacORB (Java/CORBA) with SSL

  - by jason

  I'm trying to add SSL to an existing CORBA app, and I keep getting this error: org.omg.CORBA.NO_PERMISSION: Client-side policy requires SSL/TLS, but server doesn't support it vmcid: 0x0 minor code: 0 completed: No at org.jacorb.orb.iiop.ClientIIOPConnection.checkSSL(ClientIIOPConnection.java:535) at org.jacorb.orb.iiop.ClientIIOPConnection.connect(ClientIIOPConnection.java:144) at org.jacorb.orb.giop.GIOPConnection.sendMessage(GIOPConnection.java:835) at org.jacorb.orb.giop.GIOPConnection.sendRequest(GIOPConnection.java:805) at org.jacorb.orb.giop.ClientConnection.sendRequest(ClientConnection.java:302) at org.jacorb.orb.giop.ClientConnection.sendRequest(ClientConnection.java:282) at org.jacorb.orb.Delegate.invoke_internal(Delegate.java:919) at org.jacorb.orb.Delegate.invoke(Delegate.java:868) at org.jacorb.orb.Delegate.is_a(Delegate.java:1268) at org.omg.CORBA.portable.ObjectImpl._is_a(ObjectImpl.java:112) at databridge.autogen.ILoginManagerHelper.narrow(ILoginManagerHelper.java:57) at databridge.test.Client.main(Client.java:59) I have generated keystores for both client and server and exchanged the keys between the two. Using this setup, I can get the demo application that came in the JacORB download to run successfully. The only difference I can tell is that my test is using the Tie method to get the POA. There are some policies that go into that, but I can't find any information on what policies need to go in there to enable SSL, if any. I'm not even sure that's the problem as the JacORB demo doesn't set any policies on the server or poa. When I run the -Djavax.net.debug=ssl, I can see the keystores load up the trusted certs on both the client and the server. I'm just not sure what policies are being referred to here, but it's odd that the demo works and the test doesn't using the exact same keystores and properties. I've emailed the mailing list, but I'm not holding out much hope as that doesn't seem to be very active. Any help would be greatly appreciated. Below are my properties files. Server Props: jacorb.security.support_ssl=on jacorb.security.ssl.server.supported_options=60 jacorb.security.ssl.server.required_options=20 jacorb.ssl.socket_factory=org.jacorb.security.ssl.sun_jsse.SSLSocketFactory jacorb.ssl.server_socket_factory=org.jacorb.security.ssl.sun_jsse.SSLServerSocketFactory jacorb.security.keystore=dbserver.jks jacorb.security.keystore_password=dbsslserver_pass jacorb.security.jsse.trustees_from_ks=on jacorb.security.jsse.log.verbosity=4 jacorb.implname=StandardImplName client props jacorb.security.support_ssl=on jacorb.security.ssl.client.supported_options=60 jacorb.security.ssl.client.required_options=20 jacorb.ssl.socket_factory=org.jacorb.security.ssl.sun_jsse.SSLSocketFactory jacorb.security.keystore=dbclient.jks jacorb.security.keystore_password=dbsslclient_pass jacorb.security.jsse.trustees_from_ks=on jacorb.security.jsse.log.verbosity=4 jacorb.implname=StandardImplName

  Read the article

• Can I use my existing SSL certificates on a new server with Plesk?

  - by Wil

  We are migrating to a Virtual Private Server running on Ubuntu 8.04 LTS and with a Plesk configuration panel. We have some valid SSL certificates on the old server, which I would like to use on the new configuration. I have the CSR, private key, certificate and CA-certificate. I cannot find a way to change the CSR and private key in the Plesk configuration panel. Anyone know, if this is possible and how?

  Read the article

• How do you use an iPhone and VPN over Mobile Data Network (AT&T)? [closed]

  - by RSolberg

  I know that that iPhone has the CISCO VPN software installed on it, but how can you use this software and connect to a network while on the mobile data network (AT&T)? I'm pretty sure that I was unable to get this work at one point in time, but if connected to wi-fi had no issues.

  Read the article

• How to get a Cisco VPN 3000 config as text?

  - by Steven

  We would like to get a Cisco VPN device 3000 series configuration as a text file to look at the actual configuration, but apparently the interface is not a CLI but a graphical interface or menu driven. Is there a way to get access to the complete config as a text? And to copy and paste it to a text file?

  Read the article

• Apache Server SSL Problems

  - by Kid XD

  Hi There is this weird problem going on with putting ssl on the server I keep on getting this error in the terminal after I already created the .key and .crt files but it keeps on saying I placed the files in the conf.d directory and I already configured the thing so there is something that I did wrong there I also used openssl to create a .key and the .crt files thanks for the help if anyone can service apache2 reload Syntax error on line 1 of /etc/apache2/conf.d/www.domainname.crt Invalid command '-----BEGIN', perhaps misspelled or defined by a module not included in the server configuration Action 'conftest' failed. The Apache error log may have more information. ...fail!

  Read the article

• SSL setup with GoDaddy subdomains and EC2 servers

  - by Kevin

  We have two EC2 instances that are used to host various scripts. Our main page 'companyname.com' is hosted with GoDaddy but is unrelated to those EC2 instances. I need to setup SSL connections for the two EC2 microinstances, one running Linux AMI and the other running Windows Server. I purchased two single-domain Comodo certificates and am at the part to generate CSR's on the instances. I'm not sure what to put as "Server Name" on EC2. I would like each server to be accessible through a subdomain which I have forwarded on GoDaddy to the elastic IPs on EC2. For server name, do I use the elastic ip, the EC2 public dns, or the subdomain that I want? And which of these do I then place in my VirtualHosts file on Apache? The Windows instance is running IIS7 but the Apache box is priority.

  Read the article

• Renewing a SSL certificate with GoDaddy

  - by Flavien

  GoDaddy sells SSL certificates for $12 per year (the most basic one). I have bought one of those last year, and now is the time to renew. However they are now asking for $50 for the renewal (the $12 is apparently a discount). Is there a way to get the $12 price for a renewal. Is it going to work if I buy a new certificate at $12, and use the same host as the one I had before, or are they going to prevent me from doing that?

  Read the article

• Unable to download microsoft excel files from a IIS SSL site

  - by Jeffrey

  The web master at my corporation added SSL to the web site and now none of my users can download Microsoft word and xcel files the sites generates. According to Microsoft the following must be down. Web sites that want to allow this type of operation should remove the no-cache header or headers. Typical of MS they don't tell you what to do, how to do it, or what the best practice is. The web master says its a web config setting. But all i can finds is <configuration> <appSettings/> <connectionStrings/> <system.web> <httpRuntime sendCacheControlHeader="false"/> and I don't know if this is the best way to achieve the result. I would greatly appreciate some advice on this subject.

  Read the article

• Cisco AnyConnect VPN Client broke my internet

  - by user137864

  I was using the AnyConnect client when it froze and I had to do a hard reboot of my computer. Now I can't connect to the internet at all, with or without VPN. The Network Connections manager seems to think I have a wired and wireless connection without a problem, but I can't go online. I have tried using /etc/init.d/networking restart and it even says it is "ok" with no luck. I am guessing I need to clear some settings somewhere and restart a service, but I am not sure what. Thanks!

  Read the article

• SSL Certificate is Untrusted... sometimes

  - by dragonmantank

  Web Designer I'm working with signed up a new client that needed an SSL certificate. We went to namecheap.com and purchased on from Comodo. Got all the needed files and set it up in ISPConfig. To test we used Windows 7 running IE8, Firefox 3.6, and Chrome 12, and then on OSX with Firefox 4, Safari 5, and Chrome 13. All of them worked fine. The client is getting 'This connection is untrusted' in Firefox 4 and 5. Safari works fine on their machine. On my machines and the designer's machines all works with no errors. I had the client forward me the info for the certificate that Firefox has and the fingerprints match up. I have an old Windows 2000 VM with IE6 and Chrome and those work just fine as well. Any ideas on what else to check or do? The server is running Debian 5.0, up-to-date, with Apache 2 and ISPConfig 3.3

  Read the article

• remove ssl from Google search results

  - by user73457

  I am the webadmin of a WordPress site that serves up http pages statically. The problem is that some of the pages are shown as https in Google search results. For instance, if the search term "Example Press Kit" is entered the search result site link comes up as: https://example.com/presskit/ We don't have a site ssl certificate, so surfers are being bounced. I have tried everything. Most recently I created a new website in Google WebAdmin for the https version of our home page. Then, I added sitelinks that should have redirected site links intended for https://example.com/* to http://example.com/*. But it doesn't work! Google still shows a dead link to http://example.com/presskit. I didn't think dead links lasted very long on Google results, but there they are, two weeks later. Any ideas?

  Read the article

• https (SSL) instead of http

  - by user1332729

  I am building myself a new website, out of privacy and security concerns I am contemplating trying to make it https only. It will be mobile-friendly using media queries but I am concerned--especially for mobile users--about the increased bandwidth. How much will doing so increase my bandwidth or slow load times? For pages where I'm not transferring sensitive information, should I leave external links (to a jQuery library, or a web font for instance) in http? Simply put, I have read articles saying the entire web would be more secure if everything was SSL but my actual knowledge of implementation is limited to payment gateways and log-in pages and such. I apologize for the open-ended nature of the question but anything, even just simple answers to the specific questions is welcomed.

  Read the article

• Connect to a VPN from a Virtual Machine

  - by kaharas

  I am running an Ubuntu ditro inside a VMWare virtual machine with a bridged connection on a windows 7 host. What I am trying to do is to have the virtual machine connect to a VPN, but I'm not having much success. At first, the system was using wicd, but I replaced it with network-manager who's supposed to have OpenVPN support. The problem is, even tho i've purged the wicd installation, there're connections shown in the network manager, and still, I'm able to access the net. I've also added the openvpn data in the network manager tab, but it's shown as never used. PS: when I try to stop and start the NetworkManager service, an error message pops up telling me that there's not such a service, but apt-get tells me i've already installed it...

  Read the article

• Ubuntu VPN server setup

  - by framberries

  I followed the instructions that the answer on this thread gave, Easiest way to setup Ubuntu as a VPN server. However, I cannot get it to work. When I try to connect to my network, it just says the server cannot be reached. I setup the remote IP options (which I uncommented) to be 10.0.2.2-100. My router serves out 10.0.1.2-250. I also have users setup, but they are uncommented as well. I assume you need to uncomment them?

  Read the article

• Mac OS X 10.8 VPN Server: Bypass VPN for LAN traffic (routing LAN traffic to secondary connection)

  - by Dan Robson

  I have somewhat of an odd setup for a VPN server with OS X Mountain Lion. It's essentially being used as a bridge to bypass my company's firewall to our extranet connection - certain things our team needs to do require unfettered access to the outside, and changing IT policies to allow traffic through the main firewall is just not an option. The extranet connection is provided through a Wireless-N router (let's call it Wi-Fi X). My Mac Mini server is configured with the connection to this router as the primary connection, thus unfettered access to the internet via the router. Connections to this device on the immediate subnet are possible through the LAN port, but outside the subnet things are less reliable. I was able to configure the VPN server to provide IP addresses to clients in the 192.168.11.150-192.168.11.200 range using both PPTP and L2TP, and I'm able to connect to the extranet through the VPN using the standard Mac OS X VPN client in System Preferences, however unsurprisingly, a local address (let's call it internal.company.com) returns nothing. I tried to bypass the limitation of the VPN Server by setting up Routes in the VPN settings. Our company uses 13.x.x.x for all internal traffic, instead of 10.x.x.x, so the routing table looked something like this: IP Address ---------- Subnet Mask ---------- Configuration 0.0.0.0 248.0.0.0 Private 8.0.0.0 252.0.0.0 Private 12.0.0.0 255.0.0.0 Private 13.0.0.0 255.0.0.0 Public 14.0.0.0 254.0.0.0 Private 16.0.0.0 240.0.0.0 Private 32.0.0.0 224.0.0.0 Private 64.0.0.0 192.0.0.0 Private 128.0.0.0 128.0.0.0 Private I was under the impression that if nothing was entered here, all traffic was routed through the VPN. With something entered, only traffic specifically marked to go through the VPN would go through the VPN, and all other traffic would be up to the client to access using its own default connection. This is why I had to specifically mark every subnet except 13.x.x.x as Private. My suspicion is that since I can't reach the VPN server from outside the local subnet, it's not making a connection to the main DNS server and thus can't be reached on the larger network. I'm thinking that entering hostnames like internal.company.com aren't kicked back to the client to resolve, because the server has no idea that the IP address falls in the public range, since I suspect (probably should ping test it but don't have access to it right now) that it can't reach the DNS server to find out anything about that hostname. It seems to me that all my options for resolving this all boil down to the same type of solution: Figure out how to reach the DNS with the secondary connection on the server. I'm thinking that if I'm able to do [something] to get my server to recognize that it should also check my local gateway (let's say Server IP == 13.100.100.50 and Gateway IP == 13.100.100.1). From there Gateway IP can tell me to go find DNS Server at 13.1.1.1 and give me information about my internal network. I'm very confused about this path -- really not sure if I'm even making sense. I thought about trying to do this client side, but that doesn't make sense either, since that would add time to each and every client side setup. Plus, it just seems more logical to solve it on the server - I could either get rid of my routing table altogether or keep it - I think the only difference would be that internal traffic would also go through the server - probably an unnecessary burden on it. Any help out there? Or am I in over my head? Forward proxy or transparent proxy is also an option for me, although I have no idea how to set either of those up. (I know, Google is my friend.)

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >