Search Results

Search found 5390 results on 216 pages for 'ssl vpn'.

Page 18/216 | < Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >

• Windows XP/7: custom routing for VPN connection

  - by Peter Becker

  We are dealing with a badly configured VPN connection from a vendor, which set up the default gateway but doesn't route traffic anywhere beyond their VPN zone. I managed to do some ad-hoc routing to configure a computer in a way that it can reach the vendor's VPN, our local network as well as the internet. I then tried to turn this into a script, but that failed since the interface number of the VPN changes on every connection. Is there a way in Windows XP and/or Windows 7 to configure custom routing on the client side of a VPN connection? What I would like to do is to have a script running just after the connection comes up that changes the routing table (similar to an ifup script on UNIX).

  Read the article

• How to set up a software VPN when moving a server to the cloud

  - by Neal L

  I work in a small company with one office in Dallas and another in Los Angeles. We run a Fedora server at our Dallas location and use a Linksys RV042 at each location to create a VPN connection between the sites. Every time the power or internet goes out in Dallas, our server is inaccessible so the entire company goes down. Because of this, we would like to use a shared server in the cloud (something like Linode) to avoid this problem. As a relative novice to VPN configurations, I would like to know if it is possible to set up a software VPN on the cloud server and connect our local networks in Dallas and LA to that VPN. I've read about openvpn and ssh vpns, but I don't know it is the best option. Could anyone with some experience point me in the right direction on the right combination of software VPN and hardware for this? We're open to new hardware to make this happen. Thanks!

  Read the article

• Components needed for a VPN

  - by Anriëtte Combrink

  Hi there, first of all, I asked this question on SuperUser.com, but no one there could help me. Well, we eventually got our Mac Mini Server. We now want to set up a small Remote Access VPN using this Mac Mini Server. Firstly we are not sure of the components needed additionally to the server to setup this VPN. We currently have the following: 1 Mac Mini Server 1 Firewall Router (Billion 802.11g ADSL2+ router with VPN capabilities [it says so on the box]), we currently use this as our internet connection and resides X.X.0.1 on our network. 4Mbps ADSL connection (Should this line have VPN capability enabled by the service provider?) We are not sure what else needs to be included to enable our small VPN. Any advice would be really helpful?

  Read the article

• ISPConfig 3 SSL automatic rewrite

  - by lol

  I was wondering how you could get apache2 to redirect http://server.com:8080 to https://server.com:8080 - I have an ISPConfig 3 setup and the http://server.com:8080 virtual host currently prints a 400 back request error given that I've tried adding RewriteEngine on RewriteCond %{HTTPS} !^on$ [NC] RewriteRule . https://%{HTTP_HOST}:8080%{REQUEST_URI} [L] to the ispconfig.vhost file (and reloading the conf) with no success --edit!-- I've been playing around with it and adding an 'always redirect to google' into the ispconfig vhost and it works once you've already started talking ssl to it. this means the non-ssl connections are getting 'bad request errors' before the vhost is loaded... but where...? --edit 2!-- nope, the ssl is handled exclusively by the virtual host - if I turn off the ssl engine then the rewriting works perfectly (but obviously there is no ssl at https://) thanks!

  Read the article

• ssl between balancer members?

  - by jemminger

  I have apache running on one machine as a load balancer: <VirtualHost *:443> ServerName ssl.example.com DocumentRoot /home/example/public SSLEngine on SSLCertificateFile /etc/pki/tls/certs/example.crt SSLCertificateKeyFile /etc/pki/tls/private/example.key <Proxy balancer://myappcluster> BalancerMember http://app1.example.com:12345 route=app1 BalancerMember http://app2.example.com:12345 route=app2 </Proxy> ProxyPass / balancer://myappcluster/ stickysession=_myapp_session ProxyPassReverse / balancer://myappcluster/ </VirtualHost> Note that the balancer takes requests under SSL port 443, but then communicates to the balancer members on a non-ssl port. Is it possible to have the forwarding to the balancer members be under SSL too? If so, is this the best/recommended way? If so, do I have to have another SSL cert for each balancer member? Does the SSLProxyEngine directive have anything to do with this?

  Read the article

• Dedicated IP for SSL

  - by MotionGrafika

  I'll be needing a Dedicated IP & SSL for a website. I've noticed that SSL will work for either www or canonical name - but not both. So does mean that Dedicated IP would be set to only one of them ? If I set SSL for www then if a user goes to a URL manually without the www it would show invalid certificate - how do I bypass this ? mod_rewrite in htaccess ? IF I need SSL for a subdomain, thats another SSL Certificate & Dedicated IP to purchase ?

  Read the article

• Configure VPN to access remote LAN network on Windows7

  - by PiotrK

  Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

  Read the article

• How to disable Apache http compression (mod_deflate) when SSL stream is compressed

  - by Mohammad Ali

  I found that Goggle Chrome supports ssl compression and Firefox should support it soon. I'm trying to configure Apache to to disable http compression if the ssl compression is used to prevent CPU overhead with the configuration option: SetEnvIf SSL_COMPRESS_METHOD DEFLATE no-gzip While the custom log (using %{SSL_COMPRESS_METHOD}x) shows that the ssl layer compression method is DEFLATE, the above option did not work and the http response content is still being compressed by Apache. I had to use the option: BrowserMatchNoCase ".Chrome." no-gzip' I prefer if there are more general method in case other browsers supports ssl compression or some has a version of chrome that does not have ssl compression.

  Read the article

• windows firewall and network location switch after establishing a vpn connection

  - by Konrads

  Hello, I am looking for a reasonable solution for network location switching after VPN connection is established for Windows 7. The scenario is as follows: For location public (employee plugging in his laptop in hotel, public wi-fi,etc) all inbound connections are restricted, only outbound VPN + www is enabled. Employee then initiates a VPN connection, VPN pushes routes to 10.0.0.0/8 subnet Now I would like to have lax security rules for traffic from/to 10.0.0.0/8 that comes through the VPN interface, while still protecting the laptop from traffic that comes via uplink interface as if it was private. How to achieve this switching and duality? One option I see is switching to IPSec...

  Read the article

• Easy Deployment Split Tunnel VPN Connection

  - by Joey Harris

  I was wondering if anybody could offer some insight as to how I can mass deploy VPN connection settings that support split tunneling. It has to work on both Mac and Windows systems though if a script is used, it obviously can be 2 separate scripts for both platforms. I will be setting up a Windows server with a file server and Exchange server and to access the file server I will have the clients go through VPN because we will have sensitive data. I don't want the servers network to be bogged down with the clients normal internet traffic so I will be needing some way to setup split tunneling on the clients without them having to put in a few commands every time to setup the static routes. Ive looked at Cisco VPN client but I want to try and stick with windows RRAS and avoid buying a Cisco VPN endpoint. Im basically looking for a good VPN client that can support split tunneling and mass deployment.

  Read the article

• VPN Server Problem

  - by vikas-2007bajaj

  Hi, I have Configure VPN Server for Online share Trading. I have so many VPN Clients in my VPN Server. Sometimes my VPN Clients disconnected from Systems but it shows in system tray i.e. connected but we are not able to access my application on the server.Then I disabled my Local area connection on client machine but it doesn't effect until I restart my System again.Firstly I want to know Task Manager Service for my VPN Client & how this problem can be remove.Waiting for reply. Thanks, Vikas Bajaj

  Read the article

• Configure Windows Routes for VPN

  - by Florin Sabau

  I have a Virtual PC/VMWare machine that runs Windows Server 2003. This virtual machine uses an IPSec VPN client program to connect to a remote network. I configured the virtual machine to have 2 NICs: NAT - to be used by the VPN Client to access the remote network Host only - to be able to access the virtual machine from the host The reason I have this setup is because I want to be able to access some remote network from the host machine. I could've installed the VPN client on the host machine, but the host runs Windows 7 and the client doesn't support it. The problem: although the virtual machine is normally reachable (ping + http access), as soon as the VPN client is started, neither of the NIC addresses are reachable anymore. I'm wondering if it is a routing problem that needs to be addressed? How do routing/VPN client connection affect the ability of the server to respond to client requests from the host?

  Read the article

• Sharing internet connection over VPN in Windows XP

  - by Nigel Hawthorne

  How can I share my internet connection with VPN clients using the Windows XP built-in VPN server? I want to be able to use my home internet connection (on an XP machine) from my anywhere using my laptop (Windows 7 machine). The built-in VPN server in XP and the VPN client in Windows 7 seem to do a great job of giving me access to both machines securely over the internet, but I cannot find a way to use ICS in conjunction with the incoming connection to give access to my home internet connection to my laptop remotely. Is there a way to do this? or is there an alternative VPN server software that is not limited to only local access?

  Read the article

• windows firewall and network location switch after establishing a vpn connection

  - by Konrads

  I am looking for a reasonable solution for network location switching after VPN connection is established for Windows 7. The scenario is as follows: For location public (employee plugging in his laptop in hotel, public wi-fi,etc) all inbound connections are restricted, only outbound VPN + www is enabled. Employee then initiates a VPN connection, VPN pushes routes to 10.0.0.0/8 subnet Now I would like to have lax security rules for traffic from/to 10.0.0.0/8 that comes through the VPN interface, while still protecting the laptop from traffic that comes via uplink interface as if it was private. How to achieve this switching and duality? One option I see is switching to IPSec...

  Read the article

• Configure Windows Routes for VPN

  - by Florin Sabau

  I have a Virtual PC/VMWare machine that runs Windows Server 2003. This virtual machine uses an IPSec VPN client program to connect to a remote network. I configured the virtual machine to have 2 NICs: NAT - to be used by the VPN Client to access the remote network Host only - to be able to access the virtual machine from the host The reason I have this setup is because I want to be able to access some remote network from the host machine. I could've installed the VPN client on the host machine, but the host runs Windows 7 and the client doesn't support it. The problem: although the virtual machine is normally reachable (ping + http access), as soon as the VPN client is started, neither of the NIC addresses are reachable anymore. I'm wondering if it is a routing problem that needs to be addressed? How do routing/VPN client connection affect the ability of the server to respond to client requests from the host?

  Read the article

• Two VPN (internet) connections rounting (win2003)

  - by tmp3128

  Here is my setup: - win2003 server (ISA installed) with 3 NICs:   1) internal network   2) ISP 1 (default) network (DHCP enabled)   3) ISP 2 (backup) network (DHCP enabled) - several "normal" PC within internal net - one "special" PC within internal net Both ISP 1 and ISP 2 provide access to internet and their resources thru their VPN connections. The goal is to enable all "normal" PCs to use internet from ISP_1's VPN connection and "special" should use only ISP_2's VPN connection. Futhermore all "normal" and "special" PCs should have access to several servers accesible only thru ISP_2's VPN connection. I have some thoughts how to achieve this but I want to be certain because everything should be configured as quickly as posible, avoiding significant downtime. windows-server-2003 isa routing vpn

  Read the article

• Test tomcat for ssl renegotiation vulnerability

  - by Jim

  How can I test if my server is vulnerable for SSL renegotiation? I tried the following (using OpenSSL 0.9.8j-fips 07 Jan 2009: openssl s_client -connect 10.2.10.54:443 I see it connects, it brings the certificate chain, it shows the server certificate, and last: SSL handshake has read 2275 bytes and written 465 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 50B4839724D2A1E7C515EB056FF4C0E57211B1D35253412053534C4A20202020 Session-ID-ctx: Master-Key: 7BC673D771D05599272E120D66477D44A2AF4CC83490CB3FDDCF62CB3FE67ECD051D6A3E9F143AE7C1BA39D0BF3510D4 Key-Arg : None Start Time: 1354008417 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) What does Secure Renegotiation IS supported mean? That SSL renegotiation is allowed? Then I did but did not get an exception or get the certificate again: verify error:num=20:unable to get local issuer certificate verify return:1 verify error:num=27:certificate not trusted verify return:1 verify error:num=21:unable to verify the first certificate verify return:1 HTTP/1.1 200 OK Server: Apache-Coyote/1.1 Content-Type: text/html;charset=ISO-8859-1 Content-Length: 174 Date: Tue, 27 Nov 2012 09:13:14 GMT Connection: close So is the server vulnerable to SSL renegotiation or not?

  Read the article

• Multiple subdomains, SSL on only one using port 80

  - by Emil Flink

  I am running a Apache2 server with three subdomains defined in separate files in /etc/apache2/sites-available I need ONE of those subdomains to be SSL-secured on port 80 for an application to work. Port 80 is required due to circumstances out of my control. The other subdomains are also on port 80. Now, when all subdomains are enabled in Apache the SSL-subdomain is NOT running SSL. If I disable the other subdomains SSL on the SSL-subdomain WORKS. Is there a way to fix this?

  Read the article

• Barring connections if VPN is down.

  - by Majid

  I have a VPN account and use it for sensitive communication. However the VPN connection sometimes is dropped while my main connection to the internet is still alive. The pages I visit through VPN are on HTTP (not secure) and have javascript code which pings the host every minute or so on a timer. So it happens sometimes that the VPN connection is dropped and yet js sends a request to the server (with the cookies). How could I restrict connections so they only happen if the VPN is live? Edit - Some required details were missing OS: Windows XP SP2 Browser (mostly used): Google Chrome Firewall: Windows default Sites to filter: not all traffic but all in a list of sites like abc.com, xyz.com

  Read the article

• Host a SSTP VPN Server on Windows 8

  - by Maarten

  I have a small server computer running Windows 8 at home. Currently it is hosting a PPTP VPN server using the build-in Windows 8 functionality for that. What I would want is something more secure, like an SSTP VPN server. However, I can't find any functionality of windows 8 or 3rd party software that can HOST a SSTP vpn server on Windows 8. I've only seen Client stuff and vpn pass trough services via google, all which i don't want/need. The only HOST stuff i find via google is the PPTP i set up currently. Is there any way of hosting a SSTP VPN server on my home machine? Thanks in advance, Maarten

  Read the article

• Untangle VPN setup, how to see internal addresses?

  - by NFS user

  So Untangle is setup as the default gateway at 192.168.100.1/24, it is the authorative DHCP server issuing addresses from 192.168.100.100 to 192.168.100.200 and is successfully connected to the Internet. Untangle uses OpenVPN for remote access. Accessing the VPN gives me the address 192.168.40.5. However, I cannot ping any machines on the internal 192.168.100.x network remotely. Clearly, there is something basic that I am missing. What is it and how is it solved? Update: The VPN was not setup with the internal network. Since Untangle only allows editing the VPN setup once, the VPN had to be removed and reinstalled with the internal network exported. Now it works. The lesson is that the internal network must be setup before configuring the VPN.

  Read the article

• Clearos open vpn vs windows open vpn client where client connects with no default gateway

  - by Paul

  Am using clearos as open vpn server and configured my users on windows machine with open vpn client. My problem is that users connect to the server without a default gateway and also with ip conflicts, i can ping the server but i can not ping any user behind the server. please any one can help to find out what causes the clients to connect without a default gateway and also not to be able to ping any user behind the clearos open vpn server. Help with a step by step guide of installing open vpn on clearos and open vpn clients on windows. Thanks

  Read the article

• HAProxy and Intermediate SSL Certificate Issue

  - by Sam K

  We are currently experiencing an issue with verifying a Comodo SSL certificate on an Ubuntu AWS cluster. Browsers are displaying the site/content fine and showing all the relevant certificate information (at least, all the ones we've checked), but certain network proxies and the online SSL checkers are showing we have an incomplete chain. We have tried the following to try to resolve this: Upgraded haproxy to the latest 1.5.3 Created a concatenated ".pem" file containing all the certificate (site, intermediate, w/ and w/out root) Added an explicit "ca-file" attribute to the "bind" line in our haproxy.cfg file. The ".pem" file verifies OK using openssl. The various intermediate and root certificates are installed and showing in /etc/ssl/certs. But the checks still come back with an incomplete chain. Can anyone advise about anything else we can check or any other changes we can make to try to fix this? Many thanks in advance... UPDATE: The only relevant line from the haproxy.cfg (I believe), is this one: bind *:443 ssl crt /etc/ssl/domainaname.com.pem

  Read the article

• Setup IPv6 over IPv4 tunnel in VPN

  - by bfmeb

  Let me explain my szenario: I have a linux server A. A is reachable in a VPN. So if I am connected to the VPN over Internet I can successfully ping A. Server A is connected to a Router B. Router B has a local ipv6 address and there are resources (each of them with a local ipv6 address) connected to Router B. After I am connected to VPN, I am able to use ssh to have access over A. Now I can use the ping6 command to ping the Router B or one of its connected resources. This works fine. The ping fails if I try to ping router B on my computer. Overview: My Computer -- VPN -- Server A(ipv4) -- Router B(ipv6) -- Ressource A(ipv6) On resource A runs for example a HTTP-Server. My question is: How can I access Resource A (for example with HTTP) on my to VPN connected computer? Is it possible? Should I setup a tunnel device? Sorry for this inexpertly explanation, but I am new to network stuff!

  Read the article

• Just how slow should my VPN be?

  - by David Heggie

  I have a VPN setup between a remote office with 2 ADSL connections (8Mb downstream, 512Kb upstream) and a main office with a 10Mb EFM connection (10Mb both up and down). The VPN is an IPSec connection using a DrayTek 2930 router for the ADSL and a DrayTek 3200 router at the EFM end. However, I'm unable to get speeds over this connection (tested with iperf) of anything over 600Kb or so down from the main office (traffic will pretty much always be from the main office to the remote office) Whilst I realise that there is an overhead and I'm never going to get the "full" bandwidth available over this VPN, I'd like to think that there's something I should be looking at that may help improve it. I've tried using the DrayTek's built-in "VPN Trunking" features which are supposed to load-balance connections, but this doesn't seem to improve matters much. I guess my question is - is this the kind of performance I should expect from this kind of setup and I'll just have to live with it, or should I be able to squeeze something more out of it through some VPN magic?

  Read the article

< Previous Page | 14 15 16 17 18 19 20 21 22 23 24 25  | Next Page >