Search Results

Search found 19703 results on 789 pages for 'virtual ip'.

Page 15/789 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Detect an IP address of a Wireless Access Point device

  - by dempap

  I have a Wireless Access Point device (http://www.szedup.com/show.aspx?id=1706), which I am planning to put into BeagleBoard-xM, in order to achieve wireless communication (LAN). However, I can't find it's IP address. I mean, I have to know it's IP address in order to connect with BeagleBoard-xM via a terminal emulator. For the moment, I have this device connected via Ethernet on my router. My router's setting page shows I have this device connected, but no further information. Is there any way to find the IP address of the Wireless Access Point? I hope of being understood. Any help would be really appreciated.

  Read the article

• Running a Linux virtual machine on Windows 7

  - by hekevintran

  I want to do two things: Set up a virtual machine on Windows 7 to run Ubuntu Set up a way for the virtual machine to read the windows disk or windows to have read/write access to the virtual machine's disk. My goal is to have a place where both Ubuntu and Windows can read and write. What software is good for this task? Are their free programs that can run virtual machines? Also if my machine is running Windows 7 64-bit, can I install Ubuntu 32-bit? Or am I forced to use Ubuntu 64-bit? Or does it not matter?

  Read the article

• Get/Assign IP addresses assigned by the DHCP sever with DLink switches in between

  - by Ranjith Kumar

  In our office the setup is like we have a UBUNTU server with DHCP Server connected to all the PCS via 24 port and 8 port DLink switches. How can I find all the PCS(with client name, ip and mac address)in the network?? When I do "vi /var/lib/dhcp3/dhcpd.leases", I get all the ip addresses for the switches. I have used "arp-scan --interface=eth0 --localnet" to get all the IPs and MAC Addresses in my local network. I couldn't find any option to diplay client name. Also I would like to assign particular IP for a particular PC. I have done the changes in the dhcp.conf file but it is not working as they are not directly connected to DHCP-server(DLink switches in between). How can I assign IPs for PCs in this kind of setup. Thanks in advance

  Read the article

• IIS virtual location path

  - by Worp

  Sorry in advance, for this seems to be a very noobish question and should be easily fixable, yet I can't work it out: I am setting up windows authentication for a website running on IIS 8.5: The Yii framework of the website takes input like http://localhost/mywebsite/index.php/site/loginand processes it, using the "login" action of the "site" Controller. I flipped on URL Rewrite to have nicer URLs, leaving the URL with /mywebsite/site/login. Now I need to set up windows authentication for this location. Very specifically ONLY for this very exact location. Only the /site/login location of mywebsite needs to have authentication. Every other location needs to have anonymous. Since it is a "virtual location", I don't know how to do it. I can set up win-auth for files, directories, virtual directories, etc. but not for virtual locations that do not map to any file but only to a Controller/Action in Yii. The working counterpart in Apache is but i can't "translate this into IIS". I have read that IIS does have the "~" symbol but I just couldn't make it work yet. Could it be used to achieve authentication on a location basis? I have looked around virtual directories as well, which seem to simply be a kind of "symlink" to actual folders on the harddrive. Can they be used differently to "create a virtual folder in a location that doesn't really exist to manage its properties"? Help is much appreciated.

  Read the article

• Dynamic to static internal IP address (Snow Leopard server)

  - by bac

  I purchased a new Mac mini server, since my old iMac, which was a server pretty much died. My problem is this. How do I change my internal IP address for my mac mini server to a static address, like 192.168.0.2? Before you guys harp on me, my old server was running Ubuntu Hardy and I only had to map the IP address in the router, which would automatically assign the reserved address through DHCP. Now, I know things are different between the two, but my problem is that the mac is not accepting the assigned IP address or the router just is not assigning. However, every time I have manually changed it on the Mac to an address of my choice, it takes the computer off the Internet. My router is a NetGear WTG624 v2, I believe. I need this to work, so I can utilize Dynamic DNS.

  Read the article

• Virtual Machine and Virus

  - by tellme

  I have a requirement for which I have to get online without protection (firewall, anti-virus). At the same time, I don't want to risk getting infected with viruses. If I install a virtual machine (VirtualBox) to test, and it does get infected with viruses, will it also infect my host system? In other words, can I use the virtual machine for testing without being concerned about a virus on the virtual machine infecting my host?

  Read the article

• Trying to communicate between virtual servers on the same host through ipv6

  - by Daniele Testa

  I am running KVM on a host with 2 virtual servers. Each virtual server has a own bridge interface on the host VPS1 has br1 VPS2 has br2 Each virtual server has a own ipv4 and a ipv6. The virtual servers has no problem communicating with internet or with eachother through ipv4. However, with ipv6, they can only communicate with internet and NOT with eachother. The host can ping the 2 virtual servers without any problems, but they cannot ping eachother. iptables has been set to ACCEPT on all chains, so it is not the problem. VPS1 has ipv6 = 2a01:4f8:xxx:xxx::10 VPS2 has ipv6 = 2a01:4f8:xxx:xxx::5 the host has the following routes set: ip route add 2a01:4f8:xxx:xxx::10 dev br1 ip route add 2a01:4f8:xxx:xxx::5 dev br2 When I do a ping from VPS2 to VPS1, I see the following on the host: tcpdump -i br1 15:32:27.704404 IP6 2a01:4f8:xxx:xxx::10 > ff02::1:ff00:5: ICMP6, neighbor solicitation, who has 2a01:4f8:xxx:xxx::5, length 32 So it seems like the host is seeing the request coming from VPS1 on br1. But for some reason, it does not forward it to br2. Instead it is asking where the destination IP is through ipv6 multicast. Anyone has a clue what is going on? I find this very strange, as it is working fine with ipv4 with the exact same settings and routes.

  Read the article

• Virtual Box for everyday use?

  - by Mark

  I was just thinking about how nice virtual machines are...and how even "rebooting" is less painful, because at the very least, you don't have to wait for your physical computer to turn off and on with all the mobo shannanigans at the start... so, what if I ran everything in a virtual machine? Then I wouldn't really need a primary OS, I just need something than can run VirtualBox or what have you. So what's the lightest weight OS I could install, that supports a good virtual machine?

  Read the article

• How to decrease size of KVM virtual machine disk image

  - by Cerin

  How do you decrease or shrink the size of a KVM virtual machine disk? I allocated a virtual disk of 500GB (stored at /var/lib/libvirt/images/vm1.img), and I'm finding that overkill, so now I'd like to free up some of that space for use with other virtual machines. There seems to be a lot answers on how to increase image storage, but not decrease it. I found the virt-resize tool, but it only seems to work with raw disk partitions, not disk images.

  Read the article

• Capture virtual machine traffic in Fiddler

  - by HtS

  I'm running Ubuntu in a virtual machine (host machine is Windows 7). Is it possible to use Fiddler in the host machine to capture the traffic from the virtual machine? Seeing as the virtual machine's network must be passing through the host computers NIC, can Fiddler capture the packets? (I don't know of any free alternative to Fiddler for Linux, except Tamper Data, but I need a bit more control). Thanks.

  Read the article

• Capture virtual machine traffic in Fiddler

  - by HtS

  I'm running Ubuntu in a virtual machine (host machine is Windows 7). Is it possible to use Fiddler in the host machine to capture the traffic from the virtual machine? Seeing as the virtual machine's network must be passing through the host computers NIC, can Fiddler capture the packets? (I don't know of any free alternative to Fiddler for Linux, except Tamper Data, but I need a bit more control). Thanks.

  Read the article

• Virtual Memory and SSD

  - by Zombian

  While studying for the A+ Exam I was reading about SSD's and I thought to myself that if you had a mobo with a low RAM limit you could use a dedicated SSD purely for Virtual RAM. I looked up some info on line and the info I found said that this was a poor practice but didn't explain why. Why shouldn't SSD's be used for Virtual Memory and what are your thoughts on a dedicated Virtual Memory drive? Thank you!

  Read the article

• Web application access different between Domain Name and IP

  - by h82

  in our office, we have a web application running. When we access the application by the domain name, http://server.domain.com/application/name it will display the current version of application. However, when we go by the IP address, http://192.168.1.111/application/name it will display the old version of that application. One thing is that we can access that application either by http://server.domain.com/ (it will be redirected to the long URL automatically) or http://server.domain.com/application/name when we are using domain name. But only accessible via the exact URL when we use IP address. Why is it showing the old version and how can it be corrected? It is running JRun4, Apache on Red hat. I've checked in httpd.conf a bit but could not find any. Please advice what should be done to display the same (updated version) when we access using domain name or IP address. Thank you.

  Read the article

• Forward all tracif from one IP to another Ip on OS X

  - by Josh

  This is related to this question I just asked... I have two IP address on my iMac I want to "bridge". I'm not sure what the proper terminology is... here's the situation. My iMac has a firewire connection to my laptop and an ethernet connection to the rest of my office. My laptop has an ip of 192.168.100.2 (on the firewire interface). My iMac has an IP of 192.168.100.1 on the firewire interface, and two IPs, 10.1.0.6 and 10.1.0.7, on it's ethernet interface. If I wanted to forward all traffic coming in from 192.168.100.2 on my OS X machine to go out on IP 10.1.0.7, and vice-versa, can this be done? I assume I would use the ipfw command. Essentially I want to "bridge" the firewire network to the ethernet network so my laptop can see all the machines on the 10.1 network, and all those machines can see my laptop at 10.1.0.7. Is this possible?

  Read the article

• Forward all traffic from one IP to another Ip on OS X

  - by Josh

  This is related to this question I just asked... I have two IP address on my iMac I want to "bridge". I'm not sure what the proper terminology is... here's the situation. My iMac has a firewire connection to my laptop and an ethernet connection to the rest of my office. My laptop has an ip of 192.168.100.2 (on the firewire interface). My iMac has an IP of 192.168.100.1 on the firewire interface, and two IPs, 10.1.0.6 and 10.1.0.7, on it's ethernet interface. If I wanted to forward all traffic coming in from 192.168.100.2 on my OS X machine to go out on IP 10.1.0.7, and vice-versa, can this be done? I assume I would use the ipfw command. Essentially I want to "bridge" the firewire network to the ethernet network so my laptop can see all the machines on the 10.1 network, and all those machines can see my laptop at 10.1.0.7. Is this possible?

  Read the article

• When virtual inheritance IS a good design?

  - by 7vies

  EDIT3: Please be sure to clearly understand what I am asking before answering (there are EDIT2 and lots of comments around). There are (or were) many answers which clearly show misunderstanding of the question (I know that's also my fault, sorry for that) Hi, I've looked over the questions on virtual inheritance (class B: public virtual A {...}) in C++, but did not find an answer to my question. I know that there are some issues with virtual inheritance, but what I'd like to know is in which cases virtual inheritance would be considered a good design. I saw people mentioning interfaces like IUnknown or ISerializable, and also that iostream design is based on virtual inheritance. Would those be good examples of a good use of virtual inheritance, is that just because there is no better alternative, or because virtual inheritance is the proper design in this case? Thanks. EDIT: To clarify, I'm asking about real-life examples, please don't give abstract ones. I know what virtual inheritance is and which inheritance pattern requires it, what I want to know is when it is the good way to do things and not just a consequence of complex inheritance. EDIT2: In other words, I want to know when the diamond hierarchy (which is the reason for virtual inheritance) is a good design

  Read the article

• Question about Virtual Inheritance hierarchy

  - by Summer_More_More_Tea

  Hi there: I encounter this problem when tackling with virtual inheritance. I remember that in a non-virtual inheritance hierarchy, object of sub-class hold an object of its direct super-class. What about virtual inheritance? In this situation, does object of sub-class hold an object of its super-class directly or just hold a pointer pointing to an object of its super-class? By the way, why the output of the following code is: sizeof(A): 8 sizeof(B): 20 sizeof(C): 20 sizeof(C): 36 Code: #include <iostream> using namespace std; class A{ char k[ 3 ]; public: virtual void a(){}; }; class B : public virtual A{ char j[ 3 ]; public: virtual void b(){}; }; class C : public virtual B{ char i[ 3 ]; public: virtual void c(){}; }; class D : public B, public C{ char h[ 3 ]; public: virtual void d(){}; }; int main( int argc, char *argv[] ){ cout << "sizeof(A): " << sizeof( A ) << endl; cout << "sizeof(B): " << sizeof( B ) << endl; cout << "sizeof(C): " << sizeof( C ) << endl; cout << "sizeof(D): " << sizeof( D ) << endl; return 0; } Thanks in advance. Kind regards.

  Read the article

• Static IP on FEDORA12 from Virtualbox

  - by Krazy_Kaos

  I'm trying to get my FEDORA12 to have an STATIC IP - inside virtualbox - inside Ubuntu Let me rephrase that. I have an Ubuntu 9.04 system with vitualbox and a FEDORA12 vm there and I would like to put the fedora with an STATIC IP (amahi needs it), but I'm getting stuck... I'm using NAT (if that's any help) I tryid a few tutorials, but no go. I'm kind of new to the *nix world but I'm old school on M$ Edit: Screenshots UBUNTU 9.04 (host that has the vm) FEDORA (sory cant post pics... not enough rep) INFO: GUEST WITH STATIC: IFCONFIG: eth0 Link encap:Ethernet HWaddr 08:00:27:35:CC:DE inet addr:192.168.1.55 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe35:ccde/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:2764 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:574 (574.0 b) TX bytes:127121 (124.1 KiB) Interrupt:11 Base address:0xc020 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1856 errors:0 dropped:0 overruns:0 frame:0 TX packets:1856 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:181587 (177.3 KiB) TX bytes:181587 (177.3 KiB) NETSTAT -NR: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.2.1 0.0.0.0 255.255.255.255 UH 0 0 0 eth0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 GUEST WITH DHCP: IFCONFIG: eth0 Link encap:Ethernet HWaddr 08:00:27:35:CC:DE inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fe35:ccde/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:105 errors:0 dropped:0 overruns:0 frame:0 TX packets:2966 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:49787 (48.6 KiB) TX bytes:149969 (146.4 KiB) Interrupt:11 Base address:0xc020 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1903 errors:0 dropped:0 overruns:0 frame:0 TX packets:1903 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:185931 (181.5 KiB) TX bytes:185931 (181.5 KiB) NETSTAT -NR: Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.0.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 10.0.2.2 0.0.0.0 UG 0 0 0 PS.: I'm still trying to workout the sudoer file to be able to exec the iptables command

  Read the article

• Static IP on FEDORA12

  - by Diego Castro

  I'm trying to get my FEDORA12 to have an STATIC IP - inside virtualbox - inside Ubuntu Let me rephrase that. I have an Ubuntu 9.04 system with vitualbox and a FEDORA12 vm there and I would like to put the fedora with an STATIC IP (amahi needs it), but I'm getting stuck... I'm using NAT (if that's any help) I tryid a few tutorials, but no go. I'm kind of new to the *nix world but I'm old school on M$

  Read the article

• Get a user's current IP address from Skype

  - by Jonathan.

  This is assuming that you (/police/ISP) can get the [rough] location of a laptop based on IP address. If your laptop is stolen, and the thief unwittingly connects it to the Internet, and you have Skype on the laptop could you get the public IP address of the laptop and then go to the police and get it tracked? Or activate the webcam to see the surroundings, but without having Skype ring/notify the user?

  Read the article

• Assigning static IP to VPN server

  - by Akroy

  I have a Win2008 R2 server that is going to be receiving many VPN connections. I want to be able to staticly set the IP addresses of both ends of each connection based on the user. I easily found how to do this for the client: when you're managing the user account, go to "Dial-In" and click "Assign Static IP Addresses." Now, whenever a certain account dials in, I have control over their client VIP, but how do I set my server VIP for each account?

  Read the article

• Vanity IP addresses? WARNING: geeky content

  - by Iraklis

  I did a quick search on Google and couldn't find anything regarding vanity IP addresses. I'm sure there is a market niche here. Wouldn't you dish some cash just to have a cool IP address? Anyone selling 2.2.2.2?

  Read the article

• Modifying IP Whois results?

  - by Rob

  Okay, I recently bought a dedicated server from santrex.net If you go here: http://domaintoip.com/ip.php?domain=188.72.215.27 It displays the whois information for that IP, santrex.net I want to modify my whois information, so that it displays my information instead, and doesn't link to santrex or santrex's ISP at all. Is this possible? If so, how would I go about doing it?

  Read the article

• VPS IP redirects to website instead of the IP directory? CentOs 6

  - by Travis

  So before I started putting websites on my VPS, I could access the IP directly and it would access the html folder in the /var/www/ area. But ever since I placed websites on the VPS, I can no longer access that HTML folder, it goes to the first domain I have listed on the httpd.conf file. Is there a way I can make the IP its self look like a website in the httpd conf file? I tried to construct it like the other websites but httpd would stop working.

  Read the article

• How to eliminate the downtime when a dynamic IP address changes?

  - by xenon

  We currently have a number of client computers linked up to a database server (MS SQL 2008) for replication. The database server recognises the computers based on their Windows hostname. We are using dynamic IP addresses at this time because we tend to change the computers’ hardware quite frequently, and so the MAC address may be different. Unless static IP has a good way for us to manage frequent changing of MAC addresses, we are keeping it to dynamic IP. The problem with dynamic IP addresses, however, is that when a client fetches an new IP from the DHCP, ie, there is a change in the IP address, there is going to have a downtime for the hostname to reflect the new IP address, the client’s DNS cache of the hostname to reload, and also the server’s DNS cache to reload to see the new IP from the hostname. All of these have different timings and the delay can be really bad at times. Restarting the computer doesn't work all the time too. The clients are on Windows 7. How can I eliminate the amount of downtime required when there is a change in IP in the case of dynamic IP addresses?

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >