Search Results

Search found 2177 results on 88 pages for 'wifi teethering'.

Page 15/88 | < Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >

• Getting wifi working on 14.04

  - by user286114

  I have installed Ubuntu 14.04 on my laptop. When I plug in the ethernet cable the internet works fine, but I can't see any wireless network in the networking manager. The wifi switch is definitely on on my laptop! It's a Dell XPS M1330. I'm not sure what the network card is - how can I find out? nm-tool gives me this: NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: tg3 State: connected Default: yes HW Address: 00:23:AE:28:FE:A2 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.26 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.254 DNS: 192.168.1.254

  Read the article

• Wifi hotspot disconnected after some time

  - by Rohit Bansal

  I am trying to use my Ubuntu system as Wifi Hotspot, but for some reason Hotspot get disconnected on its own. Searching for the solution, I found this help : Why is my ethernet connection connecting and disconnecting repeatedly? Reading through the above article I used the following command sudo killall dnsmasq as a result I manage to establish hotspot for around 5-10 sec before getting disconnected as against immediately.... Here's the system log (in case needed) tail -f /var/log/syslog : Apr 1 23:31:42 NetworkManager[901]: <info> Starting dnsmasq... Apr 1 23:31:42 NetworkManager[901]: <info> (wlan0): device state change: ip-config -> activated (reason 'none') [70 100 0] Apr 1 23:31:42 dnsmasq[4159]: started, version 2.57 cachesize 150 Apr 1 23:31:42 dnsmasq[4159]: compile time options: IPv6 GNU-getopt DBus I18N DHCP TFTP IDN Apr 1 23:31:42 dnsmasq-dhcp[4159]: DHCP, IP range 10.42.43.10 -- 10.42.43.100, lease time 1h Apr 1 23:31:42 dnsmasq[4159]: reading /etc/resolv.conf Apr 1 23:31:42 dnsmasq[4159]: using nameserver 220.226.6.104#53 Apr 1 23:31:42 dnsmasq[4159]: using nameserver 220.226.100.40#53 Apr 1 23:31:42 dnsmasq[4159]: cleared cache Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) successful, device activated. Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Apr 1 23:31:42 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete. Apr 1 23:31:42 dbus[885]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Apr 1 23:31:42 dbus[885]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Connection established at this point....now disconnecting after 10 sec... Apr 1 23:31:52 ntpdate[4194]: adjust time server 91.189.94.4 offset -0.011589 sec Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): IP6 addrconf timed out or failed. Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) scheduled... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) started... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) started... Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --out-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --out-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --source 10.42.43.0/255.255.255.0 --in-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --destination 10.42.43.0/255.255.255.0 --out-interface wlan0 --match state --state ESTABLISHED,RELATED --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table nat --insert POSTROUTING --source 10.42.43.0/255.255.255.0 ! --destination 10.42.43.0/255.255.255.0 --jump MASQUERADE Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 53 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol tcp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert INPUT --in-interface wlan0 --protocol udp --destination-port 67 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --out-interface wlan0 --jump REJECT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --in-interface wlan0 --out-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --source 10.42.43.0/255.255.255.0 --in-interface wlan0 --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table filter --insert FORWARD --destination 10.42.43.0/255.255.255.0 --out-interface wlan0 --match state --state ESTABLISHED,RELATED --jump ACCEPT Apr 1 23:32:01 NetworkManager[901]: <info> Executing: /sbin/iptables --table nat --insert POSTROUTING --source 10.42.43.0/255.255.255.0 ! --destination 10.42.43.0/255.255.255.0 --jump MASQUERADE Apr 1 23:32:01 NetworkManager[901]: <info> Starting dnsmasq... Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 5 of 5 (IP Configure Commit) complete. Apr 1 23:32:01 NetworkManager[901]: <info> Activation (wlan0) Stage 4 of 5 (IP6 Configure Timeout) complete. Apr 1 23:32:01 NetworkManager[901]: <warn> dnsmasq died with signal 9 Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): device state change: activated -> failed (reason 'sharing-start-failed') [100 120 18] Apr 1 23:32:01 dnsmasq[4235]: started, version 2.57 cachesize 150 Apr 1 23:32:01 dnsmasq[4235]: compile time options: IPv6 GNU-getopt DBus I18N DHCP TFTP IDN Apr 1 23:32:01 dnsmasq-dhcp[4235]: DHCP, IP range 10.42.43.10 -- 10.42.43.100, lease time 1h Apr 1 23:32:01 NetworkManager[901]: <warn> Activation (wlan0) failed for access point (Reppify Ubuntu) Apr 1 23:32:01 dnsmasq[4235]: reading /etc/resolv.conf Apr 1 23:32:01 dnsmasq[4235]: using nameserver 220.226.6.104#53 Apr 1 23:32:01 dnsmasq[4235]: using nameserver 220.226.100.40#53 Apr 1 23:32:01 dnsmasq[4235]: cleared cache Apr 1 23:32:01 NetworkManager[901]: <warn> Activation (wlan0) failed. Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] Apr 1 23:32:01 NetworkManager[901]: <info> (wlan0): deactivating device (reason 'none') [0] Apr 1 23:32:01 dbus[885]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper) Apr 1 23:32:01 dbus[885]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher' Apr 1 23:32:01 NetworkManager[901]: <error> [1333303321.565351] [nm-device-wifi.c:1815] nm_device_wifi_set_mode(): (wlan0): error setting mode 2

  Read the article

• How to speed up file transfer to/from Ubuntu Server 11.10 (wifi)

  - by Alexander

  I've been searching AU & elsewhere for the last day and a half. Haven't found an answer so I joined AU to ask for help. I'm hoping someone can point me in the right direction. Ubuntu Server 11.10 Samba VSFTPD Windows 7 PC 2 MacBook Pro - Snow Leopard/Lion 1 iMac - Lion Wireless LAN using DLink DIR-655 Link Speed: 195 Mbit/s on Mac - 54Mbps on Windows ISP Connection: Cable - 20 down/3 up No Domain Controller. All machines are members of the same workgroup. No matter how I connect I can't get better than about 700K transfer rate up/down. Mac/PC, SMB/ftp, Domain Name/Local IP I've tried different user accounts and using different folders, different volumes on the server. Nothing seems to make a difference. 700K up/down. Period. Any suggestions would be greatly appreciated. Thanks, Alexander EDIT: Using sftp now and uploading seems to peak at 980k. After about 5 minutes into a 650MB file, downloading is at 1072k and climbing about 500b/s every ten seconds. If any of that matters... I was expecting a lot faster than 1Mb tx rate. Am I off base here? EDIT: From all I've read so far, perhaps the speed isn't that bad. I only installed Ubuntu out of boredom this past weekend. The trouble is, I like it. Guess it's time to ditch the wifi and run some Cat 5.

  Read the article

• usb wifi dongle on ubuntu server, cannot install realtek driver RTL 8188cus

  - by Sandro Dzneladze

  I got cheap Ebay wifi dongle from HongKong, Im trying to set it up on my ubuntu server. Occasionally need to move server, so it cannot always be connected to router via lan. Anyhow, usb wifi came with a driver cd. I uploaded files to my home directory and tried to run install script (RTL 8188cus): sudo bash install.sh But I get error: Authentication requested [root] for make driver: make ARCH=x86_64 CROSS_COMPILE= -C /lib/modules/2.6.38-8-server/build M=/home/minime/RTL 8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.38-8-server' make[1]: *** No rule to make target `8188cus/Linux/driver/rtl8192CU_linux_v2.0.1324.20110126'. Stop. make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-8-server' make: *** [modules] Error 2 Compile make driver error: 2, Please check error Mesg Any ideas what Im doing wrong? There is another driver folder for linux called: RTL 81XX, which doesn't have install.sh at all! I tried to use make command, but I get: make: *** No targets specified and no makefile found. Stop. Any help? this is first time I'm installing driver from source. Im on Ubuntu 11.04 server. lsusb Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a000] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a001] (rev 02) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) 00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) 00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) 00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) 00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02) 00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02) 01:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1083] (rev c0) sudo lshw description: Desktop Computer product: To Be Filled By O.E.M. (To Be Filled By O.E.M.) vendor: To Be Filled By O.E.M. version: To Be Filled By O.E.M. serial: To Be Filled By O.E.M. width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall64 vsyscall32 configuration: boot=normal chassis=desktop family=To Be Filled By O.E.M. sku=To Be Filled By O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: AD525PV3 vendor: ASRock physical id: 0 *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: P1.20 date: 04/01/2011 size: 64KiB capacity: 448KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb ls120boot zipboot biosbootspecification netboot *-cpu description: CPU product: Intel(R) Atom(TM) CPU D525 @ 1.80GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Atom(TM) CPU D525 @ 1.80GHz serial: To Be Filled By O.E.M. slot: CPUSocket size: 1800MHz capacity: 1800MHz width: 64 bits clock: 200MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 48KiB capacity: 48KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-memory description: System Memory physical id: c slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM DDR2 Synchronous 800 MHz (1.2 ns) product: ModulePartNumber00 vendor: Manufacturer00 physical id: 0 serial: SerNum00 slot: DIMM0 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-bank:1 description: DIMM [empty] product: ModulePartNumber01 vendor: Manufacturer01 physical id: 1 serial: SerNum01 slot: DIMM1 *-pci description: Host bridge product: N10 Family DMI Bridge vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 02 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-display description: VGA compatible controller product: N10 Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:41 memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fe900000-fe9fffff *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 resources: irq:43 memory:fea78000-fea7bfff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:e000(size=4096) memory:feb00000-febfffff ioport:80000000(size=2097152) *-network description: Ethernet interface product: Atheros Communications vendor: Atheros Communications physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: c0 serial: XX size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.99 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:42 memory:febc0000-febfffff ioport:ec00(size=128) *-usb:0 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:d880(size=32) *-usb:1 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:d800(size=32) *-usb:2 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:d480(size=32) *-usb:3 description: USB Controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:d400(size=32) *-usb:4 description: USB Controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:fea77c00-fea77fff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-ide description: IDE interface product: N10/ICH7 Family SATA IDE Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: ide pm bus_master cap_list emulated configuration: driver=ata_piix latency=0 resources: irq:19 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff90(size=16) memory:80200000-802003ff *-disk description: ATA Disk product: WDC WD10TPVT-11U vendor: Western Digital physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WXC1A80P0314 size: 931GiB (1TB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=00088c47 *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: /media/private version: 1.0 serial: 042daf2d-350c-4640-a76a-4554c9d98c59 size: 300GiB capacity: 300GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:03 filesystem=ext4 label=Private lastmountpoint=/media/private modified=2012-04-13 20:01:16 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-13 20:01:16 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 625GiB capacity: 625GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /media/storage capacity: 600GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /media/dropbox capacity: 24GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered state=mounted *-volume:2 description: EXT4 volume vendor: Linux physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 logical name: /media/www version: 1.0 serial: 9b0a27b4-05d8-40d5-bfc7-4aeba198db7b size: 2570MiB capacity: 2570MiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-11-06 11:05:11 filesystem=ext4 label=www lastmountpoint=/media/www modified=2012-04-15 11:31:12 mount.fstype=ext4 mount.options=rw,relatime,barrier=1,stripe=1,data=ordered mounted=2012-04-15 11:31:12 state=mounted *-volume:3 description: Linux swap volume physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 version: 1 serial: 6ed1130e-3aad-4fa6-890b-77e729121e3b size: 4098MiB capacity: 4098MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:400(size=32) *-scsi physical id: 1 bus info: usb@1:4 logical name: scsi2 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@2:0.0.0 logical name: /dev/sdb size: 3864MiB (4051MB) capabilities: partitioned partitioned:dos configuration: signature=000b4c55 *-volume description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@2:0.0.0,1 logical name: /dev/sdb1 logical name: / version: 1.0 serial: 33926e39-4685-4f63-b83c-f2a67824b69a size: 3862MiB capacity: 3862MiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2011-10-11 14:03:46 filesystem=ext4 lastmountpoint=/ modified=2012-03-19 11:47:29 mount.fstype=ext4 mount.options=rw,noatime,errors=remount-ro,barrier=1,data=ordered mounted=2012-04-15 11:31:11 state=mounted rfkill list all Doesnt show anything! dmesg | grep -i firmware [ 0.715481] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared

  Read the article

• WiFi can't reconnect after suspend/hibernate on Ubuntu 12.04.1

  - by CyberOPS

  I've had this problem since Ubuntu 11.10 (my first install) but I was able to get around this issue with this answer. When I updated to Ubuntu 12.04 I encrypted the home folder, so I wasn't able to suspend or hibernate anymore (disappointing :l). Because of this and another issue I had1, I chose to reinstall. Sometime after I reinstalled, I was reminded about reconnection issue because it wasn't working after I suspended. I tried to use the same fix as before but I couldn't get it to work. I've also tried a couple other different fixes I found around the web but they didn't work. Since I'm new to linux, I'm gonna have a tough time figuring this out by myself. So does anyone know how, or what I need to figure out how, to fix this? Info: Computer: HP Pavilion dv6t-6b00 CTO Quad Edition Entertainment Notebook PC Network Card: Intel® Centrino® Wireless-N 1000 OS: Ubuntu 12.04.1 (x64) dual booting with Windows 7 (x64) (Not using Wubi) Wireless Card Driver: Intel Wireless WiFi Link drivers for Linux (iwlwifi) 1 - ntfs-config caused colord to crash on startup, even after NTFS-Config was removed.

  Read the article

• My WiFi gets deauthenticated every few minutes or seconds (Reason: 7)

  - by dan

  My Wifi on my new Thinkpad W520 running Natty keeps dropping out and coming back on. Output from dmesg below. Any advice? [30493.687552] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [30493.689127] wlan0: authenticated [30493.689144] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [30493.693592] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [30493.693595] wlan0: associated [31631.172868] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31631.211847] cfg80211: All devices are disconnected, going to restore regulatory settings [31631.211868] cfg80211: Restoring regulatory settings [31631.211873] cfg80211: Calling CRDA to update world regulatory domain [31631.215037] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [31631.215042] cfg80211: World regulatory domain updated: [31631.215044] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [31631.215046] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215049] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215051] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [31631.215053] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31631.215055] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [31632.289638] wlan0: authenticate with e0:91:f5:ef:7b:b2 (try 1) [31632.291262] wlan0: authenticated [31632.291276] wlan0: associate with e0:91:f5:ef:7b:b2 (try 1) [31632.295119] wlan0: RX AssocResp from e0:91:f5:ef:7b:b2 (capab=0x411 status=0 aid=4) [31632.295123] wlan0: associated [31886.234836] wlan0: deauthenticated from e0:91:f5:ef:7b:b2 (Reason: 7) [31886.306735] cfg80211: All devices are disconnected, going to restore regulatory settings [31886.306740] cfg80211: Restoring regulatory settings [31886.306744] cfg80211: Calling CRDA to update world regulatory domain

  Read the article

• 12.04 WiFi issue on a particular access point

  - by user71706

  I have a WiFi access point that I connect to a PC to share its Internet connection with multiple machines, in a training environment. All the machines with 11.04 connect to this access point with no problem, and can access any server on the Internet. These machines have an Intel Wireless -N 1030 BGN chipset (as reported by lspci). Now, my problem is that I don't manage to connect 12.04 machines to this wireless network. The systems I tried do manage to connect (confirmed by Network Manager), but when I try to access a website like http://kernel.org, the browser shows "Connecting to kernel.org...", but displays a "The connection has timed out" error page. Other symptoms: Name resolution works (for example 'nslookup kernel.org') finds kernel.org's IP address 'ping kernel.org' doesn't work The same 12.04 machines have no problem at all with other wireless networks. So there is probably something weird in my access point (though the 11.04 machines are not impacted). Would you have any suggestions for investigating this issue? Thanks, Michael.

  Read the article

• running adb via wifi on ubuntu 13.04

  - by Blaze Tama

  First, im new on linux so please bear with me. I have a rooted android phone and i was able to run the adb via wifi network on windows, where i just need to go to the adb's directory and type adb connect. However, i can't just do that in my ubuntu. Everytime i enter adb connect, the terminal always said that i dont have the adb and i must install it. When i check the ADT Bundle (I downloaded the bundled one from here), i can see the adb is there inside the platform-tools folder. I already tried to change the directory to the platform-tools and run the adb connect from there, but its still not working. Do i need to install the adb again via terminal? Or did i miss something? You may be wondering why dont i just download the adb (again) via terminal and do trial and error? The answer is because i dont have a good internet connection, so i want to avoid unnecessary downloads. Thanks for your time :D

  Read the article

• Wifi Hotspot not created in ubuntu 12.04

  - by user2406568

  I am using Hp Pavillion g4 with braodcom wireledd adpater. I have the following hardware configuration, for lan and wifi eth0 Link encap:Ethernet HWaddr 10:1f:74:b2:61:cc inet addr:10.3.10.45 Bcast:10.3.11.255 Mask:255.255.252.0 inet6 addr: fe80::121f:74ff:feb2:61cc/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:190855 errors:0 dropped:0 overruns:0 frame:0 TX packets:133209 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:77642990 (77.6 MB) TX bytes:25290447 (25.2 MB) Interrupt:44 Base address:0x6000 eth1 Link encap:Ethernet HWaddr 38:59:f9:7d:d6:b2 inet addr:10.3.9.180 Bcast:10.3.11.255 Mask:255.255.252.0 inet6 addr: fe80::3a59:f9ff:fe7d:d6b2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:245562 errors:82 dropped:0 overruns:0 frame:408011 TX packets:90383 errors:260 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:140772881 (140.7 MB) TX bytes:13041542 (13.0 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3230 errors:0 dropped:0 overruns:0 frame:0 TX packets:3230 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:435198 (435.1 KB) TX bytes:435198 (435.1 KB) whenever I click on create hotspot nothing happens. Any solution???

  Read the article

• Cannot connect to Internet via Wifi

  - by lvogel

  I have a laptop that's currently configured as a dual-boot. The problem: I cannot connect to the Internet in the home wireless network through Ubuntu in the apartment where I currently live. The strange part: I can connect to it just fine through Windows (as right now), and I can use the Internet through Ubuntu on this computer with all the other wireless networks I have tried. The problem is only with this particular combination. The only possible explanations I can think of are either that this network is WPS, or that it's a driver problem--Vodafone router. The router 'sees' the computer--and it says it's connected; however, I keep getting prompted for a password, and I enter the key that works with Windows, but in Ubuntu it just keeps asking for it repeatedly, and I can't access the Internet. I don't have an ethernet cable at the moment, but if someone would be so kind as to ask me questions I will gladly answer, and if you have suggestions, I will do them--the only thing is, I am subletting this apartment from someone who is away on vacation, so I don't want to screw with the router settings unless I know what I'm doing! - I do not have Wicd - Yes, I have the router's information (key works in Windows) - Feedback of lshw says that the wireless card is Ultimate N Wifi Link 5300, vendor: Intel Corporation, physical id: 0 ,etc. The first two commands I was told to try work OK, but when I typed sudo ifconfig wlan0 essid ..... I got back 'essid: Unknown host' Would my question be better on the Ubuntu forums than here on AU?

  Read the article

• Install wireless driver for an HP ProBook 4525s

  - by dotNET

  Hey, I need to install the wifi driver to ubuntu. so I downloaded the driver from hp website but the extension is .rpm, so I need to convert him to .deb so I can install it on ubuntu. The problem is I don't have internet connection on ubuntu to do this : sudo apt-get install alien how can convert the driver on windows for example, or how can I do download alien and place it under my usb to install it after booting on ubuntu. Thanks UPDATE: It's an HP ProBook 4525s with this two drivers : Pilote LAN sans fil Ralink Pilote LAN sans fil Broadcom http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4173724&lang=en&cc=fr&prodTypeId=321957&prodSeriesId=4173615&taskId=135

  Read the article

• Steps to diagnose SNU5600 disconnection problem

  - by Rich

  I have a Philips SNU5600 WiFi dongle plugged into two machines (ie I have two SNU5600 dongles, one in each machine). One machine is running 10.10 and the other is running Linux Mint. The dongles work absolutely fine, except if I do a lot of file transfers to a NAS attached to the wireless router. After a while the connection to the router will go. To get the connection back I either need to run sudo /etc/init.d/networking restart or I need to unplug and plug in again the dongle. Otherwise the dongle works fine (web browsing, streaming, etc). Output of lsusb: Bus 002 Device 003: ID 0471:1236 Philips (or NXP) SNU5600 802.11bg Output of lsusb -v at http://pastebin.com/dXYKkF01 What steps should I take next to resolve this? Is it a known problem? Could it be the router? It is a 3Com "OfficeConnect Wireless 11g Cable/DSL Gateway Version 1.02.15".

  Read the article

• Wifi disabled for Intel Centrino Wireless-N 1000 Intel in 12.04

  - by new_bie

  Laptop model - HP- dm4 - 2070. I had faced the same problem for wireless being disabled in case of 11.10. It had to do with the new kernel. I thought with 12.04 this problem will be handled but the problem persists. Is there no way to get the wireless working except for the way mentioned in the following link ?? Wifi for Centrino Wireless-N 1000 Intel Corporation (HP pavillion dm4 - 2070us) is not working Output for sudo lshw -class network *-network UNCLAIMED description: Network controller product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress cap_list configuration: latency=0 resources: memory:c2500000-c2501fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: c0 serial: 2c:41:38:07:f3:e3 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.116 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:43 memory:c1400000-c143ffff ioport:2000(size=128) Output for dmesg | grep iwl [ 14.742886] iwlwifi 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.742897] iwlwifi 0000:01:00.0: setting latency timer to 64 [ 14.743013] iwlwifi 0000:01:00.0: pci_resource_len = 0x00002000 [ 14.743016] iwlwifi 0000:01:00.0: pci_resource_base = ffffc90000c78000 [ 14.743018] iwlwifi 0000:01:00.0: HW Revision ID = 0x0 [ 14.743119] iwlwifi 0000:01:00.0: irq 42 for MSI/MSI-X [ 14.743161] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C [ 14.743229] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 14.765147] iwlwifi 0000:01:00.0: device EEPROM VER=0x15d, CALIB=0x6 [ 14.765151] iwlwifi 0000:01:00.0: Device SKU: 0X50 [ 14.765154] iwlwifi 0000:01:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3 [ 14.765907] iwlwifi 0000:01:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels [ 14.912840] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-5.ucode' failed. [ 14.914254] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-4.ucode' failed. [ 14.915718] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-3.ucode' failed. [ 14.916986] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-2.ucode' failed. [ 14.919391] iwlwifi 0000:01:00.0: request for firmware file 'iwlwifi-1000-1.ucode' failed. [ 14.919445] iwlwifi 0000:01:00.0: no suitable firmware found! [ 14.919783] iwlwifi 0000:01:00.0: PCI INT A disabled [ 2868.960807] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_idt rfcomm bnep bluetooth parport_pc ppdev binfmt_misc hid_logitech_dj usbhid hid joydev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq hp_wmi sparse_keymap hp_accel lis3lv02d input_polldev snd_timer snd_seq_device wmi iwlwifi snd mac80211 i915 cfg80211 rts_pstor(C) drm_kms_helper drm uvcvideo videodev psmouse soundcore mei(C) v4l2_compat_ioctl32 mac_hid serio_raw snd_page_alloc i2c_algo_bit video lp parport atl1c

  Read the article

• 13.10 upgrade dropping wifi [on hold]

  - by Daryl

  Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

  Read the article

• Getting USB Wifi device to work

  - by Lolwhites

  I have been trying to get an Olitec Wifi N USB dongle to work. At first it lit up but wouldn't connect. A little Googling suggested that it would need ndiswrapper to make it work. After installing and trying to add driver with ndisgtk, I got the error message FATAL: Module ndiswrapper not found., but the driver appears in the list of currently installed ones anyway. However, the situation appears even worse: The USB device doesn't even light up (which it does when plugged into my netbook), suggesting the thing isn't detected any more. How to I go about resolving this issue? I've tried uninstalling ndiswrapper but there seems to have been some permanent change as the device is still not lighting up, as it did at first. Edit: Contents of /etc/modprobe.d/ndiswrapper.conf alias usb:v04F2pAFF7d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFF8d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFF9d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFFAd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFFBd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v04F2pAFFCd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v050Dp1102d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v050Dp2102d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v050Dp2103d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0586p341Fd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v06F8pE033d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v07AAp0056d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v07B8p8178d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v07B8p8189d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0B05p17ABd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8170d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8176d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8177d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8178d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Ad*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Cd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Ed*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp817Fd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8186d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BDAp8192d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0BFFp8160d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0DF6p0052d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0DF6p005Cd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0DF6p0061d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v0EB0p9071d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v103Cp1629d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v13D3p3357d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v13D3p3358d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v13D3p3359d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p3307d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p3308d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p3309d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2001p330Ad*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p1201d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p4902d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p4903d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019p4904d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Ad*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Cd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pAB2Ed*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v2019pED17d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v20F4p624Dd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v20F4p648Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v20F4p664Bd*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v4855p0090d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v4855p0091d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v4856p0091d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v7392p7811d*dc*dsc*dp*ic*isc*ip* ndiswrapper alias usb:v7392p7822d*dc*dsc*dp*ic*isc*ip* ndiswrapper

  Read the article

• Determining Maximum Txpower a WiFi Card Supports?

  - by BigGenius

  I have a Atheros R9285 wifi card. How can i determine , what is max. Txpower it can support? biggenius@hackbook:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Default" Mode:Managed Frequency:2.437 GHz Access Point: 00:08:5C:9D:4F:40 Bit Rate=2 Mb/s Tx-Power=35 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=24/70 Signal level=-86 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:140 Invalid misc:247 Missed beacon:0 eth0 no wireless extensions. biggenius@hackbook:~$ iw phy0 info Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (35.0 dBm) * 2417 MHz [2] (35.0 dBm) * 2422 MHz [3] (35.0 dBm) * 2427 MHz [4] (35.0 dBm) * 2432 MHz [5] (35.0 dBm) * 2437 MHz [6] (35.0 dBm) * 2442 MHz [7] (35.0 dBm) * 2447 MHz [8] (35.0 dBm) * 2452 MHz [9] (35.0 dBm) * 2457 MHz [10] (35.0 dBm) * 2462 MHz [11] (35.0 dBm) * 2467 MHz [12] (35.0 dBm) * 2472 MHz [13] (35.0 dBm) * 2484 MHz [14] (35.0 dBm) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Band 2: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 5180 MHz [36] (35.0 dBm) * 5200 MHz [40] (35.0 dBm) * 5220 MHz [44] (35.0 dBm) * 5240 MHz [48] (35.0 dBm) * 5260 MHz [52] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5280 MHz [56] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5300 MHz [60] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5320 MHz [64] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5500 MHz [100] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5520 MHz [104] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5540 MHz [108] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5560 MHz [112] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5580 MHz [116] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5600 MHz [120] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5620 MHz [124] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5640 MHz [128] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5660 MHz [132] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5680 MHz [136] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5700 MHz [140] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5745 MHz [149] (35.0 dBm) * 5765 MHz [153] (35.0 dBm) * 5785 MHz [157] (35.0 dBm) * 5805 MHz [161] (35.0 dBm) * 5825 MHz [165] (35.0 dBm) Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed, WDS, P2P-client } <= 2048, #{ AP, mesh point, P2P-GO } <= 8, total <= 2048, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (82) * Unknown command (81) * Unknown command (84) * Unknown command (87) * Unknown command (85) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS.

  Read the article

• Unable to either locate any wireless networks nor even connect to wifi

  - by Leo Chan

  I'm new to Linux. I currently have installed ubuntu 12.10. I had a previous problem with my wireless card (see url to see previous problem : How to enable wireless in a Fujitsu LH532?). It now shows Connect to hidden network and create new wireless network but now unfortunately it simply cannot find any wireless connections. I did have a very thorough look around about this problem such as wait a little longer since sometimes it cannot load all the wireless connections available that quickly. My wifi is a hidden network and I have used the connect to hidden network feature but it keeps asking for my wep key which has been checked 4 times (I counted) and it still seems to not work; It keeps asking for the WEP key. I did try both WEP 40/128-bit key and WPA & WPA2 since previously on my windows it worked; My family later decided to use WEP. I only have a quick fix using a usb wireless stick and I wish to have a more solid fix. Thanks Results from sudo iwlist wlan0 scan wlan0 Scan completed : Cell 01 - Address: 00:1E:73:C8:62:BD Channel:6 Frequency:2.437 GHz (Channel 6) Quality=25/70 Signal level=-85 dBm Encryption key:on ESSID:"EnigmaHome" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000cb3bb10a5c Extra: Last beacon: 696ms ago IE: Unknown: 000A456E69676D61486F6D65 IE: Unknown: 010482848B96 IE: Unknown: 030106 IE: Unknown: 0706484B20010B1E IE: Unknown: 2A0107 IE: Unknown: 32080C1218243048606C IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00 Cell 02 - Address: C8:3A:35:34:C1:60 Channel:6 Frequency:2.437 GHz (Channel 6) Quality=22/70 Signal level=-88 dBm Encryption key:on ESSID:"Tenda" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s 18 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s Mode:Master Extra:tsf=000001336e70ffdd Extra: Last beacon: 716ms ago IE: Unknown: 000554656E6461 IE: Unknown: 010882848B961224486C IE: Unknown: 030106 IE: Unknown: 32040C183060 IE: Unknown: 0706434E20010D10 IE: Unknown: 33082001020304050607 IE: Unknown: 33082105060708090A0B IE: Unknown: DD270050F204104A0001101044000101104700102880288028801880A880C83A3534C160103C000101 IE: Unknown: 050400010000 IE: Unknown: 2A0106 IE: Unknown: 2D1AEC0117FFFF0000000000000000000000000000000C0000000000 IE: Unknown: 3D1606000500000000000000000000000000000000000000 IE: Unknown: 7F0101 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK Preauthentication Supported IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00 IE: Unknown: 0B05010089127A IE: Unknown: DD1E00904C33EC0117FFFF0000000000000000000000000000000C0000000000 IE: Unknown: DD1A00904C3406000500000000000000000000000000000000000000 IE: Unknown: DD07000C4304000000 Cell 03 - Address: 00:1E:73:C8:62:BF Channel:6 Frequency:2.437 GHz (Channel 6) Quality=47/70 Signal level=-63 dBm Encryption key:on ESSID:"\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000cb3bac614e Extra: Last beacon: 1064ms ago IE: Unknown: 00110000000000000000000000000000000000 IE: Unknown: 010482848B96 IE: Unknown: 030106 IE: Unknown: 050C010200000000000000000000 IE: Unknown: 0706484B20010B1E IE: Unknown: 2A0107 IE: Unknown: 32080C1218243048606C IE: Unknown: DD070050F202000100

  Read the article

• Dell 3721 Wifi problem Ubuntu 13.04

  - by Sebastian

  I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

  Read the article

• Routing WIFI and LAN for specific traffic

  - by jakebird451

  I have two network devices aboard my macbook pro: WIFI (en1): Used for general traffic. Connects to an ip of 192.168.19.* via DHCP LAN (en0): Used for specific traffic. Connects to an ip of 192.168.2.10 as a static IP. Does not connect to a router, only a switch for direct routing connection. I have 4 IP addresses I need to access on the LAN: 192.168.2.1 192.168.2.21 192.168.2.20 192.168.2.30 The rest of the traffic needs to go to WIFI. I have tried setting up a routing table for the specific ip addresses, but I only managed to mess up my network. I do not venture out into the world of networking too often, but this was the latest command I have been trying: sudo route add -host 192.168.2.30 -interface en0 This command killed my ability to use ping. It told me that ping could not allocate memory (is that even possible)? It also killed my wifi access. Logging out and back in fixed the issue. I really do not mind to make this solution permanent, so I am fine with a temporary routing. EDIT: If I currently have been trying: sudo route flush sudo route add default 192.168.19.1 This gets everything to work for about a minute. But after such minute it "forgets" the routing to WiFi while retaining LAN's (en0) routing. If I unplug and replug my LAN (en0) cable, the process works for another minute.

  Read the article

• Virtual Wifi Issue Windows 7

  - by Matt

  Lately I've been trying to use my laptop as a wireless router in my room. I have it connected to my school's network through ethernet, and I want to set up wireless so that I can use Wifi on my Android phone and iPod Touch. In the past, I used Connectify, but I started having an issue where my phone would find the network, connect, attempt to get the IP, and then suddenly the network would disappear. Then it'd pop up again, and the same process would happen over and over. I decided that I'd totally uninstall Connectify, but after that, neither Virtual Router Manager nor the command prompt could create a viable network either. My phone and even my iPod now encounter the same problem. Neither can successfully connect. So evidently there is something wrong with the laptop's virtual wifi feature, and I have no idea what that could be. I've tried enabling certain services that virtual wifi supposedly relies on, but some of them don't start, namely Remote Access Connection Manager. But I also have read that these enable on their own and that if they are normally not enabled it's fine. Furthermore, I even uninstalled and reinstalled the drivers for my wireless card. Any ideas as to why my virtual wifi won't function? Anything? I really would love to get this working...

  Read the article

• A router that supports connecting with 2 different wifi networks

  - by Allan Deamon

  I Have the following setup in one place: We have a small local ISP through wireless. I have a external parabolic antenna, connected to a external usb wifi radio, connected through USB to a desktop old PC. The pc connects do the ISP wiki network, then do a Dial Up (PPPoE) connection through the this wifi setup. This will expand with others mobiles devices to be used. When I need, I take my home wireless router and connect though Ethernet in the PC, which is shares the internet. The problem is that the PC must be always ON and working. I would like to buy a wireless router which could be an AP to the mobile devices, notebooks, etc, as also could connect to the ISP Wifi/PPPoE network. So, this device must: Have one radio with detachable antenna to connect to the external antenna. It must connect as client to a network and then dial up the PPP Have another radio serving as AP (infrastructure) to the local place This can't be very expensive. I found a candidate: ( http://www.tp-link.com/en/products/details/?categoryid=1682&model=TL-WR2543ND ) It have 3 deatachable antennas, working with dual band. Officially, his firmware doesn't support it. My supposition: If internally there is 3 or 2 distinct wlan ports (like wlan0, wlan1), and there is support, i could use a OpenWRT, DD-WRT or Tomato to make this works. It also have 1 USB port, which I cold use to connect my actual USB Wifi card on it instead to the old PC. Another alternative, is a router that can do this out of box, with the original firmware. But I don't think this is a easy thing to find.

  Read the article

• Outdoor WiFi Mesh Topology vs. Repeaters

  - by IronJaxor

  Here's the current configuration in our organization (which I believe is incorrect): We have a number of Cisco 1500 series AP's (22 in total), that are mounted outdoors to provide seamless WiFi coverage over a large area. Each AP however has its own physical ethernet connection back to the WLC (All the AP's are marked as Root AP's). They are all broadcasting the same SSID. We have tried to stagger the channel selection but because there are only three non-overlapping channels to choose from, and in some areas the density of AP's is quite high, there is multiple places of channel interference. With this configuration we experience 100-150 disconnects from clients every day. (Our clients are mobile so they move throughout the coverage area constantly). My idea is to switch the AP's to the same channel thereby forming a wireless mesh, use the built in functionality of the 1500 series to use 802.11a as the backhaul, designate one or two AP's as root AP's and wire them back to the WLC. Thereby forming a WiFi mesh, which if I'm not mistaken is the point of the 1500 series in the first place! I am however completely new at WiFi networks and wondering if I am simply mistaken in what I believe my proposed changes will enable, or if there is a better way to tackle the WiFi topology.

  Read the article

• iPhone 3G can't see any WiFi networks, ever

  - by torbengb

  I've got WiFi turned on in the settings, and ask before connect turned off. My iPhone 3G should see several WiFi networks, but it lists none. It also does not list my own network, which my computers see just fine. It has worked earlier but stopped working recently (possibly because of or at the same time of other trouble (which a restore solved)). The iPhone is not jailbroken. The SSID is not hidden, uses WPA2. It also finds no WiFi networks when I'm at a friend's house. His iPhone 2G sees several WiFi networks, including his own. When I use the manual entry method, specifying my home SSID and the proper WPA2 passkey, then click join, the iPhone says couldn't find that network. Same at my friend's place, with his SSID and passkey. I've just backed up my iPhone, then restored it, to see if refreshing the firmware would help. It didn't change anything. Is my iPhone broken? How can I fix this?

  Read the article

• Cannot connect to Open WiFi hotspot created by Android

  - by Bibhas

  I'm trying to share my 3G data connection via WiFi hotspot. I have an open Hotspot running on my phone(Xperia Neo V - MT11i - Android 2.3.4). But I cannot connect to it from my Ubuntu system. Here is the syslog while I try to connect to it - NetworkManager[1077]: <info> Activation (wlan0) starting connection 'TheNeo' NetworkManager[1077]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... NetworkManager[1077]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[1077]: <info> Activation (wlan0/wireless): connection 'TheNeo' requires no security. No secrets needed. NetworkManager[1077]: <info> Config: added 'ssid' value 'TheNeo' NetworkManager[1077]: <info> Config: added 'scan_ssid' value '1' NetworkManager[1077]: <info> Config: added 'key_mgmt' value 'NONE' NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. NetworkManager[1077]: <info> Config: set interface ap_scan to 1 NetworkManager[1077]: <info> (wlan0): supplicant interface state: inactive -> scanning wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) NetworkManager[1077]: <info> (wlan0): supplicant interface state: scanning -> authenticating kernel: [17498.113553] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17498.310138] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17498.510069] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17498.710083] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17504.779927] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17504.976420] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17505.176379] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17505.376314] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17511.478385] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17511.674738] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17511.874655] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17512.074659] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17518.152643] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17518.349064] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17518.549051] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17518.748999] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17524.858896] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17525.055404] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17525.255387] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17525.455254] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17531.589176] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17531.785747] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17531.985724] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17532.185610] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17538.329257] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17538.528003] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17538.728024] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17538.927922] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17545.022036] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17545.218339] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17545.418319] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17545.618206] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17551.724177] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17551.920685] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17552.120597] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17552.320526] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out NetworkManager[1077]: <warn> Activation (wlan0/wireless): association took too long, failing activation. NetworkManager[1077]: <info> (wlan0): device state change: config -> failed (reason 'supplicant-timeout') [50 120 11] NetworkManager[1077]: <warn> Activation (wlan0) failed for access point (TheNeo) NetworkManager[1077]: <warn> Activation (wlan0) failed. NetworkManager[1077]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[1077]: <info> (wlan0): deactivating device (reason 'none') [0] NetworkManager[1077]: <info> (wlan0): supplicant interface state: authenticating -> disconnected NetworkManager[1077]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Why is direct probe to 5c:b5:24:2f:d1:2f timed out? Any idea?

  Read the article

• Ubuntu 12.04 + Wifi not working

  - by user171154

  i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

  Read the article

< Previous Page | 11 12 13 14 15 16 17 18 19 20 21 22  | Next Page >