Search Results

Search found 5954 results on 239 pages for 'cpu cores'.

Page 150/239 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

  • Windows hangs on Rename, Delete and Move for specific MKV files

    - by Creativehavoc
    I have been googling this issue for a long time, and no full solutions seem to be out there. For certain mkv files, windows hangs when moving, copying, or deleting. These files play fine in a player such as GOM player. System: a fast windows 7, 64 bit box. Results: CPU change is negligible Memory usage rockets up to ~100% In cased of delete or move, "discovering files" dialogue box stays up for a long time Rename simply shows spinning icon until it finishes Action is completed after EXTREMELY long amount of time Memory usage does not return to normal "Fixes:" Disable thumbnail creation (helps for some cases) After move/rename/delete kill explorer with taskmanager, and relaunch to re-claim your memory Even with the thumbnails turned off, the issue persists. I have also tried re-muxing a file, which worked fine, but still resulted in a file with the same above issues.

    Read the article

  • Applying the Windows Experience Index to Servers

    - by Scott
    I finally convinced upper management that we need a computer replacement plan, and I've been tasked with making an inventory of what we have and determining what needs to be replaced this year, next year, the year after, etc. I had to use some sort of criteria to back up my recommendations, so I decided to try using the Windows Experience Index. I've determined the CPU and Memory scores for all of our desktops and servers using community data. I also feel fairly successful in assigning a WEI score to each user based on their computing needs. I'm struggling with assigning a WEI score to the various servers that we have: file server, database server, Exchange server, backup server (for doing backups), web server. Suggestions would be appreciated.

    Read the article

  • Is there an application I can run that will tell me how fast my computer is running?

    - by Robert Hume
    At work I log into a virtual Windows machine. I'm told it runs as fast as a PC, but I'm skeptical. Is there an application I can run on the machine that will tell me how faster the machine is actually running? It would be nice if it ran on Windows and on Mac. Updating with more details -- I was asked "why does it matter" -- here's why: It matters because I'm a programmer and I need as much speed (CPU and memory) as possible to do my work. IMO, the virtual machine is noticeably slower than a basic $800 PC would be, but I need a way a proving it. Websites like Bandwidthtest.com can show me my internet speed, so I'm wondering if there's an app that can test my computer's speed.

    Read the article

  • my webserver with 16GB ram shows all RAM as used, but is it really, see the 'top'

    - by Alex
    I have some questions about my web server. Its a LAMP web server running centos 5.5 and php5, mysql5. The server gets hundreds (maybe thousand) of concurrent users during peak hours. I'm trying to optimize a little and understand "top". From what I can see: all 16GB of my ram have been used up? does that mean that my server needs more memory? My swap is only 2GB, should it be increased? usually during peak hours my server load average first number is about 2.5-3. What could I do to optimize the server so that the load average even during peak doesn't go above 1? In the past I was told a good working server should stay under 1 load, is this still true? Although even during load of 2.5-3, server pages and applications seem to load with pretty good speed. what should the memory size in php.ini be set to? top - 14:30:18 up 2 days, 12:41, 5 users, load average: 1.25, 1.74, 2.92 Tasks: 305 total, 2 running, 302 sleeping, 0 stopped, 1 zombie Cpu(s): 6.3%us, 0.9%sy, 0.0%ni, 92.5%id, 0.2%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 16427200k total, 16111472k used, 315728k free, 3120316k buffers Swap: 2104496k total, 268k used, 2104228k free, 6216756k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 29080 apache 15 0 358m 36m 5192 S 20.2 0.2 2:08.40 httpd 29093 apache 18 0 357m 36m 5192 S 18.2 0.2 2:02.52 httpd 29079 apache 15 0 370m 49m 5832 S 10.0 0.3 2:32.14 httpd 1812 apache 15 0 370m 49m 5196 S 7.3 0.3 2:25.30 httpd 5204 apache 15 0 358m 36m 5168 S 5.3 0.2 0:59.28 httpd 29075 apache 15 0 370m 48m 5184 S 3.3 0.3 2:15.93 httpd 9712 apache 15 0 360m 38m 5180 S 3.0 0.2 0:54.81 httpd 29072 apache 16 0 358m 36m 5192 S 2.7 0.2 2:24.43 httpd 6310 apache 17 0 388m 67m 5180 S 2.3 0.4 0:58.85 httpd 8674 apache 15 0 343m 21m 4980 S 2.0 0.1 0:07.91 httpd 29085 apache 15 0 371m 49m 5224 S 2.0 0.3 2:16.86 httpd 29083 apache 15 0 370m 48m 5196 S 1.7 0.3 2:10.64 httpd 5575 apache 15 0 357m 36m 5228 S 1.3 0.2 0:53.78 httpd 29066 apache 15 0 379m 59m 5860 R 1.3 0.4 2:11.93 httpd 29078 apache 15 0 370m 48m 5188 S 1.3 0.3 2:14.52 httpd 29084 apache 15 0 370m 48m 5208 S 1.0 0.3 2:02.49 httpd 29089 apache 15 0 370m 48m 5188 S 1.0 0.3 2:27.61 httpd 29082 apache 15 0 390m 68m 5188 S 0.7 0.4 2:32.48 httpd 29984 apache 15 0 358m 36m 5228 S 0.7 0.2 2:08.32 httpd 3571 root 16 0 13400 1792 848 S 0.3 0.0 2:37.89 top 4419 mysql 15 0 668m 175m 7204 S 0.3 1.1 3:32.25 mysqld 28181 root 15 0 90460 3624 2680 S 0.3 0.0 0:17.60 sshd 29091 apache 15 0 390m 69m 5196 S 0.3 0.4 2:29.99 httpd 32476 root 15 0 12900 1320 848 R 0.3 0.0 0:06.46 top 1 root 15 0 10372 680 572 S 0.0 0.0 0:02.01 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.51 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.12 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.06 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.06 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:01.45 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.22 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.15 migration/6 21 root 34 19 0 0 0 S 0.0 0.0 0:00.02 ksoftirqd/6 22 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/6 23 root RT -5 0 0 0 S 0.0 0.0 0:00.15 migration/7 24 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/7 25 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/7 26 root RT -5 0 0 0 S 0.0 0.0 0:00.19 migration/8 27 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/8 28 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/8 29 root RT -5 0 0 0 S 0.0 0.0 0:00.34 migration/9 30 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/9 31 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/9 32 root RT -5 0 0 0 S 0.0 0.0 0:00.16 migration/10 33 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/10 34 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/10 35 root RT -5 0 0 0 S 0.0 0.0 0:00.12 migration/11 36 root 34 19 0 0 0 S 0.0 0.0 0:00.05 ksoftirqd/11 37 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/11 38 root RT -5 0 0 0 S 0.0 0.0 0:00.35 migration/12

    Read the article

  • rundll32.exe constantly running taking up resources slowing down my Win 7 computer

    - by Joe Fletcher
    Over the past week, my Windows 7 Home Premium computer (8gb RAM, 64bit) has been running slowly. When I look at my processes, there are always 2 rundll32.exe's running taking up 3 & 25% CPU power, memory slowly creeping upwards from around 115mb to 160mb each in the time it has taken me to right this message, sometimes popping upt o 300mb and back down. Svchost.exe is at 260mb. When I end those processes, everything returns to snappiness. I recently did some Windows Updates, and I think it was around the time my computer started acting slowly, but I can't remember if it was before or after the updates that things started running slowly. Last night I ccleaned & defrag'ed. How can I diagnose what's causing the slowness?

    Read the article

  • Is Gadget on Windows 7 buggy for now?

    - by Jian Lin
    Is Gadget on Windows 7 buggy for now? For example, I made CPU Meter, Clock "always on top", but sometimes, one is on top but the other is not. I have to make it "not always on top" and then "always on top" again and it will show up on top again. another thing that might or might not be a bug is: even when viewing video in full screen mode, the gadgets are all there. This may be one case where the user won't want all the gadgets on top when viewing a video full screen.

    Read the article

  • Puppet performance compared to cfengine

    - by Andy
    I'm considering using Puppet or cfengine. Key factors are performance, and research on the internet suggests cfengine uses less memory and CPU cycles compared to puppet. However, puppet seems easier to use. I need to manage several web servers, as well as handheld tablets and machines that will only connect to some central control servers periodically. All are Linux machines. Would I be able to use either puppet or cfengine for this? And if so, does puppet still make poor use of resources? I'd like to use puppet because it seems simpler, but a lot of the articles I've found refer to cfengine 2 - is cfengine 3 easier to configure? Thanks

    Read the article

  • Is there a path from OpenSCAD to WebGL?

    - by Andrew Domaszek
    tl;dr version, Does a software path exist to convert from openscad input to render on a website via webgl? What I'm trying to do is display OpenSCAD created designs uploaded via post on a LEMPy driven website; this is currently done by outputting to a static png image. I would like to render one of openscad's export formats(wikibooks) and convert for display in javascript/webgl through some software path available via linux batch. CPU and RAM are relatively unconstrained but no GPU available. I've looked into CopperLeicht, but it requires CopperCube output which would require windows or wine. FOSS is preferred but not required. edit: I found three.js has converters for fbx, dae, obj, and 3ds formats which might be helpful as one of the last steps.

    Read the article

  • Why so Long time span in creating Session Factory?

    - by vijay.shad
    Hi My project is web application running in the tomcat container. This application is a spring framework based hibernate application. The problem with this is it takes a lot of time when creates session factory. here is the logs 2010-04-15 23:05:28,053 DEBUG [SessionFactoryImpl] Session factory constructed with filter configurations : {} 2010-04-15 23:05:28,053 DEBUG [SessionFactoryImpl] instantiating session factory with properties: {java.vendor=Sun Microsystems Inc., sun.java.launcher=SUN_STANDARD, catalina.base=/usr/local/InstalledPrograms/apache-tomcat-6.0.20, sun.management.compiler=HotSpot Tiered Compilers, catalina.useNaming=true, os.name=Linux, sun.boot.class.path=/usr/java/jdk1.6.0_17/jre/lib/resources.jar:/usr/java/jdk1.6.0_17/jre/lib/rt.jar:/usr/java/jdk1.6.0_17/jre/lib/sunrsasign.jar:/usr/java/jdk1.6.0_17/jre/lib/jsse.jar:/usr/java/jdk1.6.0_17/jre/lib/jce.jar:/usr/java/jdk1.6.0_17/jre/lib/charsets.jar:/usr/java/jdk1.6.0_17/jre/classes, java.util.logging.config.file=/usr/local/InstalledPrograms/apache-tomcat-6.0.20/conf/logging.properties, java.vm.specification.vendor=Sun Microsystems Inc., hibernate.generate_statistics=true, java.runtime.version=1.6.0_17-b04, hibernate.cache.provider_class=org.hibernate.cache.EhCacheProvider, user.name=root, shared.loader=, tomcat.util.buf.StringCache.byte.enabled=true, hibernate.connection.release_mode=auto, user.language=en, java.naming.factory.initial=org.apache.naming.java.javaURLContextFactory, sun.boot.library.path=/usr/java/jdk1.6.0_17/jre/lib/i386, java.version=1.6.0_17, java.util.logging.manager=org.apache.juli.ClassLoaderLogManager, user.timezone=Canada/Pacific, sun.arch.data.model=32, java.endorsed.dirs=/usr/local/InstalledPrograms/apache-tomcat-6.0.20/endorsed, sun.cpu.isalist=, sun.jnu.encoding=UTF-8, file.encoding.pkg=sun.io, package.access=sun.,org.apache.catalina.,org.apache.coyote.,org.apache.tomcat.,org.apache.jasper.,sun.beans., file.separator=/, java.specification.name=Java Platform API Specification, java.class.version=50.0, user.country=US, java.home=/usr/java/jdk1.6.0_17/jre, java.vm.info=mixed mode, os.version=2.6.18-128.el5, path.separator=:, java.vm.version=14.3-b01, hibernate.jdbc.batch_size=25, java.awt.printerjob=sun.print.PSPrinterJob, sun.io.unicode.encoding=UnicodeLittle, package.definition=sun.,java.,org.apache.catalina.,org.apache.coyote.,org.apache.tomcat.,org.apache.jasper., java.naming.factory.url.pkgs=org.apache.naming, sun.rmi.dgc.client.gcInterval=3600000, user.home=/root, java.specification.vendor=Sun Microsystems Inc., java.library.path=/usr/java/jdk1.6.0_17/jre/lib/i386/server:/usr/java/jdk1.6.0_17/jre/lib/i386:/usr/java/jdk1.6.0_17/jre/../lib/i386:/usr/java/packages/lib/i386:/lib:/usr/lib, java.vendor.url=http://java.sun.com/, java.vm.vendor=Sun Microsystems Inc., hibernate.dialect=org.hibernate.dialect.MySQL5InnoDBDialect, sun.rmi.dgc.server.gcInterval=3600000, common.loader=${catalina.home}/lib,${catalina.home}/lib/*.jar, java.runtime.name=Java(TM) SE Runtime Environment, java.class.path=:/usr/local/InstalledPrograms/apache-tomcat-6.0.20/bin/bootstrap.jar, hibernate.bytecode.use_reflection_optimizer=false, java.vm.specification.name=Java Virtual Machine Specification, java.vm.specification.version=1.0, catalina.home=/usr/local/InstalledPrograms/apache-tomcat-6.0.20, sun.cpu.endian=little, sun.os.patch.level=unknown, hibernate.cache.use_query_cache=true, hibernate.connection.provider_class=org.springframework.orm.hibernate3.LocalDataSourceConnectionProvider, java.io.tmpdir=/usr/local/InstalledPrograms/apache-tomcat-6.0.20/temp, java.vendor.url.bug=http://java.sun.com/cgi-bin/bugreport.cgi, server.loader=, os.arch=i386, java.awt.graphicsenv=sun.awt.X11GraphicsEnvironment, java.ext.dirs=/usr/java/jdk1.6.0_17/jre/lib/ext:/usr/java/packages/lib/ext, user.dir=/, line.separator=, java.vm.name=Java HotSpot(TM) Server VM, hibernate.cache.use_second_level_cache=true, file.encoding=UTF-8, java.specification.version=1.6, hibernate.show_sql=true} 2010-04-15 23:08:53,516 DEBUG [AbstractEntityPersister] Static SQL for entity: com.vsd.model.Order There you can see the time delay of more than 3 mins in executing these processes. My database is mysql and database server is running on the local machine only. The container environment is Centos Linux system. I am clueless about why it takes that much of time in executing these process, But when i do the same task from under eclipse it does not take that much of time. Development environment is Windows.

    Read the article

  • Libvirt / QEmu Machine Fails and Refuses Restart Because of Memory Allocation Errors

    - by Elmar Weber
    I'm having a problem with libvirt. On a system restart all virtual machines (VMs) are started without a problem and keep running. Then at some point in time a set of machines shuts down according to their log. When I try to restart the machine, I'm getting an error that the memory allocation failed, although more than enough memory is free. server ~ # free total used free shared buffers cached Mem: 16176648 16025476 151172 0 285432 950300 -/+ buffers/cache: 14789744 1386904 Swap: 0 0 0 server ~ # virsh start zimbra error: Failed to start domain zimbra error: Unable to read from monitor: Connection reset by peer server ~ # tail -n 4 /var/log/libvirt/qemu/zimbra.log LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 3072 -smp 2,sockets=2,cores=1,threads=1 -name zimbra -uuid d05ddb7a-83c4-a77b-d8bc-a322648520cf -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/zimbra.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/zimbra.img,if=none,id=drive-ide0-0-0,format=raw -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -netdev tap,fd=19,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:21:a9:ad,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 192.168.1.2:25 -k de -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/2 Failed to allocate 3221225472 B: Cannot allocate memory 2012-07-06 08:42:56.076+0000: shutting down server ~ # uname -a Linux server 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux The system is a Ubuntu 12.04 server. The problem seems to occurs since the last restart, which was due to a number of package upgrades and a kernel upgrade. I tried booting with the previous kernel, the problem persists. I was not able to pinpoint an exact event when the machines fail, they do it at nearly the same time. The last time a duplicity job was running, this was not always the case however. Any suggestions on how to debug this? Best regards, elm

    Read the article

  • Why Matlab in screen in Linux on PuTTY terminates itself after closing PuTTY session?

    - by Karl
    I connected to a linux server with PuTTY and start a screen session, and start matlab with: matlab -nodesktop Then, I run my matlab code as usual. The code will run for hours. So to test whether screen works, I start another PuTTY session and run top. Then, I close PuTTY session with still-running Matlab (top shows Matlab at 100% CPU usage) in screen. To my surprise, my Matlab process vanished after I close the aforementioned session. I've tried this a few times, and it seems the same thing happened. screen -ls shows that my screens are there but detached. top also shows that my matlab is not there. What might be the possible cause of this? Doesn't screen normally should keep on running even I terminate my PuTTY session?

    Read the article

  • How do I make compiling code not bring my system to its knees?

    - by Jason Baker
    I have a macbook with snow leopard and 2 gigs of RAM. When I compile C or C++ code, my system becomes all but unusable. For instance, when I compile llvm I notice that there are about 10 or 11 processes (cc1plus) getting launched at a time that suck up my CPU time and memory. Is there any way to maybe make it compile less at one time? I'll gladly wait a while longer to have my system usable while I'm compiling. Or is this something that you just have to live with when compiling C or C++?

    Read the article

  • Computer Randomly Restarts (no crash dump)

    - by Bruno Charters
    Hey everyone this is my first time here, so, my computer got pulled out of his place the other day by accident and it never got back to working decently ever again. I just stopped using it because everytime i power it on, it restarts. Some times it doesn't even reach the desktop, others it even allows me to run a game or something. It gets really random. Today i was trying my last attempt before sending it to fix and it ran fine for 40 minutes but as i tried to run a game the screen got really messeud up full of colorful lines and stuff and i'm assuming it had to do with the graphics card. Altho, my question is, what can be causing all this restart thingie? Can it be just the Power Supply failing me and hence, not giving enough power to make the graphic card go for instance? My computer specs are: Motherboard: Asus P5KPL - AM CPU: Intel QuadCore 2.33 ghz Graphic Card: Nvidia GeForce GTS260 Ram: 2x2gb ddr2 Power Supply: Nox Urano 500W Thanks in advance, Bruno Charters

    Read the article

  • How can I set the fan speed to 100% on a laptop?

    - by Codemonkey
    I recently purchased a HP Pavilion dv7-4031. When it's cool, it works smoothly and efficiently. However when CPU and GUP temperatures reach 60c and above, the PC starts freezing up and stuttering. I can hear that the fan speeds steadily increase all the way up to 70-80c. This is what pisses me off: I want the fan speeds to run 100% all the time, perhaps preventing the high temperatures in the first place. The way it is now, fan speeds only increase to keep internal temperatures at above 60c. I've searched all over for any sort of speed control, finding nothing. Any help appreciated. I have tried Speedfan. In "Fans" there is nothing listed. I took that as a bad sign. The BIOS is pathetic, and only has 4 or 5 changeable settings, including "Quickstart" and "Boot order"

    Read the article

  • Computer not displaying anything

    - by Justen
    The computer in question worked last week. It's brand new, never been connected to the internet, up-to-date parts, etc. Last week, I installed some 3D software on it, then shut it down and waited for the license files that arrived this week. I've done this to 4 other PCs with the same hardware and software. I've tried: Hooking it up to 3 different monitors using different video cables 2 other graphics cards and a handful of other things like switching which port it's plugged into before and after a restart. I have the driver disc, and a windows reinstallation disc, but they won't do me any good because no display at all for any interval of time. All the fans are moving: psu, gfx, cpu etc, so I don't believe it's a power issue. Here are the specs I know of: 4GB RAM 8800 GTX 700w PSU Intel dual core (not sure of model) Anyways, I'm open to ideas.

    Read the article

  • How can artificially create a slow query in mysql?

    - by Gray Race
    I'm giving a hands on presentation in a couple weeks. Part of this demo is for basic mysql trouble shooting including use of the slow query log. I've generated a database and installed our app but its a clean database and therefore difficult to generate enough problems. I've tried the following to get queries in the slow query log: Set slow query time to 1 second. Deleted multiple indexes. Stressed the system: stress --cpu 100 --io 100 --vm 2 --vm-bytes 128M --timeout 1m Scripted some basic webpage calls using wget. None of this has generated slow queries. Is there another way of artificially stressing the database to generate problems? I don't have enough skills to write a complex Jmeter or other load generator. I'm hoping perhaps for something built into mysql or another linux trick beyond stress.

    Read the article

  • Determining Performance Limits

    - by JeffV
    I have a number of windows processes that pass messages between them hat a high rate using tcp to local host. Aside from testing on actual hardware how can I assess what my hardware limit will be. These applications are not doing CPU intensive work, mostly decomposing and combining messages, scanning over them for special flag in the data etc.. The message size is typically 3k and the rate is typically ~10k messages per second. ~30MB per second between processing stages. There may be 10 or more stages depending. For this type of application, what should I look to for assessing performance? What do I look for in a server performance wise? I am currently running an XEON L5408 with 32 GB ram. But I am assuming cache is more important than actual ram size as I am barely touching the ram.

    Read the article

  • Where lies the soul of a computer?

    - by Christian
    When you take the system drive and put it in a new box, do you rename it or do you keep the name? And when you put a fresh drive in the old box, do you give it a new name? What is with upgrading? How many of the components do you have to change until a computer loses its identity? So a CPU is often described as the heart or the brain of a computer but where lies its soul? What determines its identity? The data on the system drive? The majority of its components? This might sound like a not-so-serious question and it probably is but whom of you didn't already face this problem?

    Read the article

  • Why is the latency on one LVM volume consistently higher?

    - by David Schmitt
    I've got a server with LVM over RAID1. One of the volumes has a consistently higher IO latency (as measured by the diskstats_latency munin plugin) than the other volumes from the same group. As you can see, the dark orange /root volume has consistently high IO latency. Actually ten times the average latency of the physical devices. It also has the highest Min and Max values. My main concern are not the peaks, which occur under high load, but the constant load on (semi-)idle. The server is running Debian Squeeze with the VServer kernel and has four VServer containers and one KVM guest. I'm looking for ways to fix - or at least understand - this situation. Here're some parts of the system configuration: root@kvmhost2:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system--host-root 19G 3.8G 14G 22% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 224K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/md0 942M 37M 858M 5% /boot /dev/mapper/system--host-isos 28G 19G 8.1G 70% /srv/isos /dev/mapper/system--host-vs_a 30G 23G 6.0G 79% /var/lib/vservers/a /dev/mapper/system--host-vs_b 5.0G 594M 4.1G 13% /var/lib/vservers/b /dev/mapper/system--host-vs_c 5.0G 555M 4.2G 12% /var/lib/vservers/c /dev/loop0 4.4G 4.4G 0 100% /media/debian-6.0.0-amd64-DVD-1 /dev/loop1 4.4G 4.4G 0 100% /media/debian-6.0.0-i386-DVD-1 /dev/mapper/system--host-vs_d 74G 55G 16G 78% /var/lib/vservers/d root@kvmhost2:~# cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=16500836k,nr_inodes=4125209,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 /dev/mapper/system--host-root / ext3 rw,relatime,errors=remount-ro,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/md0 /boot ext3 rw,sync,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-isos /srv/isos ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_a /var/lib/vservers/a ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_b /var/lib/vservers/b ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_c /var/lib/vservers/c ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/loop0 /media/debian-6.0.0-amd64-DVD-1 iso9660 ro,relatime 0 0 /dev/loop1 /media/debian-6.0.0-i386-DVD-1 iso9660 ro,relatime 0 0 /dev/mapper/system--host-vs_d /var/lib/vservers/d ext3 rw,relatime,errors=continue,data=ordered 0 0 root@kvmhost2:~# cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sda2[0] sdb2[1] 975779968 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 979840 blocks [2/2] [UU] unused devices: <none> root@kvmhost2:~# iostat -x Linux 2.6.32-5-vserver-amd64 (kvmhost2) 06/28/2012 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 3.09 0.14 2.92 1.51 0.00 92.35 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 23.25 161.12 7.46 37.90 855.27 1596.62 54.05 0.13 2.80 1.76 8.00 sdb 22.82 161.36 7.36 37.66 850.29 1596.62 54.35 0.54 12.01 1.80 8.09 md0 0.00 0.00 0.00 0.00 0.14 0.02 38.44 0.00 0.00 0.00 0.00 md1 0.00 0.00 53.55 198.16 768.01 1585.25 9.35 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.48 20.21 16.70 161.71 8.62 0.26 12.72 0.77 1.60 dm-1 0.00 0.00 3.62 10.03 28.94 80.21 8.00 0.19 13.68 1.59 2.17 dm-2 0.00 0.00 0.00 0.00 0.00 0.00 9.17 0.00 9.64 6.42 0.00 dm-3 0.00 0.00 6.73 0.41 53.87 3.28 8.00 0.02 3.44 0.12 0.09 dm-4 0.00 0.00 17.45 18.18 139.57 145.47 8.00 0.42 11.81 0.76 2.69 dm-5 0.00 0.00 2.50 46.38 120.50 371.07 10.06 0.69 14.20 0.46 2.26 dm-6 0.00 0.00 0.02 0.10 0.67 0.81 12.53 0.01 75.53 18.58 0.22 dm-7 0.00 0.00 0.00 0.00 0.00 0.00 7.99 0.00 11.24 9.45 0.00 dm-8 0.00 0.00 22.69 102.76 407.25 822.09 9.80 0.97 7.71 0.39 4.95 dm-9 0.00 0.00 0.06 0.08 0.50 0.62 8.00 0.07 481.23 11.72 0.16 root@kvmhost2:~# ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 59 May 11 11:19 control lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm1 -> ../dm-4 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm2 -> ../dm-3 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-isos -> ../dm-2 lrwxrwxrwx 1 root root 7 May 11 11:19 system--host-root -> ../dm-0 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-swap -> ../dm-9 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_d -> ../dm-8 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_b -> ../dm-6 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_c -> ../dm-7 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_a -> ../dm-5 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm3 -> ../dm-1 root@kvmhost2:~#

    Read the article

  • Why did my laptop turn off?

    - by darenw
    Normally I can slip my running laptop into a backpack, go somewhere, and if it's no more than about half an hour later, it'll still be running. At the destination I plug in the AC power unit and all is well. I run it off of the AC unit before and after the trip, have the screen at less than full backlight brightness, and don't have any peripherals that burn power. Sometimes the wireless switch accidentally slides in the backpack, and that causes extra power to be used and the laptop dies before I reach the destination. Sad, but so be it. But sometimes the wireless switch is off, I've reached the destination in less than 30 minutes (typically 10-20 min), and I know the battery was fully charged, yet the machine is off. Is there a way to determine, after the fact, why the machine shut itself off? I'm running Linux on a fairly powerful Gateway with 4GB RAM, fancy nvidia graphics, dual core cpu, chosen more for number crunching power than battery life, but should last easily for half an hour if not an hour.

    Read the article

  • How can I log all traffic with its exact length?

    - by Legate
    I want to process all packets with their size going through our gateway server (running Debian 4.0). My idea is to use tcpdump, but I have two questions. The command I'm currently thinking of is tcpdump -i iface -n -t -q. Is it guaranteed that tcpdump will process all packets? What happens if the CPU is working to full capacity? The format of the output lines is IP ddd.ddd.ddd.ddd.port > ddd.ddd.ddd.ddd.port: tcp 1260. What exactly is 1260? I have the suspicion that it is the payload in bytes of the packet, which would be exactly what I need, but I'm not sure. It might be the TCP Window Size. Or perhaps there is an even better way of doing this? I thought about a LOG rule in iptables, but tcpdump seems easier and I don't know whether iptables can log the packet lengths.

    Read the article

  • Xinetd , vncserver memory requirement

    - by JP19
    Hi, I am installing the following on a low memory system: vnc4server xinetd xterm openbox obconf I will only occasionally be logging into the vncs for some admin work. My question is: 1) Does xinetd take memory / cpu even when vncserver is not running? If so, can I "run" xinetd on demand (how)? And if no, any idea how much memory it will take when vncserver is not running? 2) Does vncserver take substantial memory when no clients are connected? 3) Do openbox/obconf take memory when vncserver is running but no client are connected? 4) Do openbox/obconf take memory when no vncserver is running? thanks JP

    Read the article

  • AMD Phenom II X4 965 crossfire motherboard

    - by Nick
    I am trying to build a cheap mining rig. I wanted to use the AMD Phenom II X4 965 (HDZ965FBGMBOX) processor as it got very good reviews and benchmarks, and is inexpensive. However, I am having trouble finding motherboards with crossfire support for 2 GPUs. AMD's website only lists five compatible motherboards, of which only one has crossfire support. Worse, it is expensive and seems to be obsolete and no longer available. I have trouble believing that there are only five compatible motherboards for that CPU. Are there any low-end motherboards that are both compatible with the AMD Phenom II X4 965 and have CrossFire support? (Is there a way to find this sort of information, like a central site that lists motherboards and their technical specifications?)

    Read the article

  • sound clipping in windows 7 64bit

    - by Sonic Soul
    something is up with 64 bit version of windows 7. i have 2 (good pro-sumer) sound cards which i've used in other version of windows 7 w/out problems, but now it is causing severe clipping (noise, sound having little gaps surrounded by static).. the cards i am using is echo mia, and native instruments audio kontrol 1. the audio kontrol 1 is a external card, and would work ok for a few hours after rebooting, and than it would go back into clipping mode, to the point where you tube videos would not play from trying to process sound and it stopping for extended periods of time. echo mia is performing better, but there is still some clipping and distortion. the machine i use is newly built, with i7 920 64 bit cpu, 6 gigs of ram and an outdated nvidia video card (geforece 7950 gx2)

    Read the article

  • Nginx Static Content Server Maxing Out?

    - by Harry
    I use nginx to serve the static content for a decently busy website of mine. I have the logging disabled, and 4 worker processes enabled with 5,000 connections per worker (which should yield a max connection limit of 20,000. The server is only operating at about 10% CPU usage and 50% ram, but it's very laggy, and sometimes nginx is so slow to respond to the requests, it times out. For a small number of connections, it's fine, but once any load starts occurring (~2,500 connections), it backs up and bogs down. Is there any other bottlenecks or limits that I might be hitting? This is a FreeBSD server, and all the static files are located locally (not NFS). The NIC is an unmetered gigabit, and it's only using around 75 megabit. Any insight would be appreciated. Thanks.

    Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >