Search Results

Search found 5954 results on 239 pages for 'cpu cores'.

Page 157/239 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• Why has my Mac been running fsck_hfs for two days now?

  - by Nate

  I first noticed that fsck_hfs was running, taking up 50-75% of a CPU, yesterday. It continues to run today. ps shows that it is doing /sbin/fsck_hfs -f -n -x -E /dev/disk3. Only problem: I don’t think I have a /dev/disk3. Why is it running? Will it ever finish? Can I kill it? What is /dev/disk3? Could it be my Time Machine volume, which is not mounted at the moment? System Info: MacBook Pro (2008). It has two disks installed—the internal disk (/dev/disk1) and a PC Card SSD (/dev/disk0, surprisingly). It connects to a remote Time Machine volume attached to an Airport Extreme base station.

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• What are best monitoring tool customizable for cluster / distributed system?

  - by Adil

  I am working on a system having multiple servers. I am interested in monitoring some server specific data like CPU/memory usage, disk/filesystem usage, network traffic, system load etc. and some other my process specific data. What are available open source that can serve my purpose? If it provides to customize the parameter to be monitored and monitor your own data by creating plugin / agent. Any suggestions? I heard of Nagios, Zabbix and Pandora but not sure if they provide such interface.

  Read the article

• Tomcat access logs - are failed requests included?

  - by Maxim Eliseev

  We have a RESTful web service (Java, hosted in Tomcat on Ubuntu on Amazon EC2). From time to time it fails (not every week). When it fails, Java CPU consumption goes to 100% and it takes all available memory. It does not finish by itself. I have to restart the server. There is nothing suspicious in Tomcat access logs. I guess one of our users could submit a very "heavy" request which brought the server down. Is it possible this request is not in Tomcat logs since it never finished?

  Read the article

• ASA Slow IPSec Performance

  - by Brent

  I have a IPSec link between two sites over ASA 5520s running 8.4(3) and I am getting extremly poor performance when traffic passes over the VPN. CPU on the device is 13%, Memory at 408 MB, and active VPN sessions 2 so the load on the device is particularly low. Screenshot of wireshark file transfer between the two hosts over the VPN: The large amount of Header checksum failures is alarming, but I am not sure what to check now. I perf is showing around 4-5 Mbit/sec with differing TCP window sizes. Show Run on the ASA http://pastebin.com/uKM4Jh76 Show cry accelerator stats http://pastebin.com/xQahnqK3

  Read the article

• JFFS2 poor mount performance

  - by Marcin Polkowski

  I run multiple ARM boards with Debian Linux installed. Board is equipped with 512 MB of NAND memory. I've observed that after ~3 months of continuous run booting time increased significantly - it takes over 3 minutes to mount filesystem (JFFS2). System was using about 35% of available storage so I’ve removed unnecessary files (got to ~18%) but this didn't change anything. Then I realized that my software produces directories that are left empty so I’ve removed ~500 empty and unnecessary dirs. This didn’t help either. After system is started I see JFFS2 garbage collector (jffs2_gcd_mtd4) running and occupying over 90% of CPU. Now my question: is there a way to „optimize” JFFS2 filesystem for better performance - faster booting (my system have limited timid to boot up)? It would be great if this optimization could be done remotely - I have no physical access to boards.

  Read the article

• 250k connections for comet with node.js

  - by Nenad

  How to implement node.js to be able to handle 250k connections as comet server (client side we use socket.io)? Would the use of nginx as proxy/loadbalancer be the right solution? Or will HA-Proxy be the better way? Has anyone real world experience with 100k+ connections and can share his setup? Would a setup like this be the right one (Quad core CPU per server - start 4 Instances of node.js per Server?): nginx (as proxy / load balancing server) / | \ / | \ / | \ / | \ node server #1 node server #2 node server #3 4 instances 4 instances 4 instances

  Read the article

• PC Speaker sounds when machine locks up.

  - by d.c

  What would cause my PC speaker to sound a low frequency continuous tone as my system locks up? Generally what will happen is I'll notice the application I'm using will stop responding but explorer will be partially responsive, then after a few more actions explorer stops responding, and the last click will cause the pc speaker to emit a low constant tone as the machine locks up completely. The only resolve at that point is to restart. Its not a thermal issue, I'm reading the cpu, and hdd temps with software and hardware monitors. AV and malware scans come up clean. I've swapped out my ram, reseated all my components. Used sfc with no results. chkdisk locks up at 3% and defragmenting does the same, but I can read the drive without trouble (I know this as I've done av/malware scans and I also backed everything up since this started happening) I'm mostly just interested to learn, if anyone knows, why the pc speaker would sound during the lock up. windows xp sp2

  Read the article

• Xen Disk Performence Issues

  - by user98651

  I'm currently using Xen PV on CentOS 5 with my domU's as flat files running on a hardware RAID controlled (write cache enabled) formatted with XFS. On the dom0 I can get about 500MB/s in a 2GB dd write from /dev/zero however on the domU's I'm lucky if I get 10MB/s (it is usually around half that). I've tried changing the disk scheduling to NOOP on the domU's, changed some mount parameters and tweaked the performance allocations of both the dom0 (prioritize CPU) and domU's (increase RAM and VCPU allocations). None of these steps have produced any noticeable change in performance. My instinct here is that it is not a hardware problem, due to the solid performance of the dom0. Any ideas on what might be causing this problem? I'm considering moving to LVM based domU's.

  Read the article

• Time randomly changing itself, internet randomly dying

  - by Vee

  Operating System MS Windows 8 Enterprise 64-bit CPU Intel Core i7 2700K @ 3.50GHz 45 °C Sandy Bridge 32nm Technology RAM 8,00 GB Dual-Channel DDR3 @ 800MHz (8-8-8-24) Motherboard ASRock Z77 Extreme4-M (CPUSocket) 40 °C Graphics SMXL2270HD (1920x1080@60Hz) M2094D-PZ (1680x1050@60Hz) 896MB GeForce GTX 275 (CardExpert Technology) 57 °C Hard Drives 466GB FUJITSU MAXTOR STM3500320AS (SATA) 39 °C Optical Drives ASUS DRW-2014L1T Audio High Definition Audio Device Hello everyone, I installed Windows 8 RTM a few weeks ago. It's not my first time installing it, but it's the first time having two annoying problems: 1) Randomly, the system clock changes time all by itself - to fix it I have to open the time window and sync it with the internet. 2) Randomly, internet connection stops working - to fix I have to run troubleshooting. Windows will find a problem with IP on the "Ethernet" connection and fix it. 3) In rare occasions, my PC freezes and I need to restart it (a BSOD once happened, but after that only freezes) How can I permanently solve these problems? This is what I've already tried: Reset Virus scan Stop/reset the Windows Time service Disable/re-enable Windows Time automatic internet sync Change time from BIOS Change motherboard battery

  Read the article

• What do you do with a 15 node decommissioned Itanium cluster?

  - by Gomibushi

  We are decommissioning a 15 node Itanium cluster. We don't know what to do with it. Being geeks we want to put it (or its individual nodes) to some cool use, but since it is Itanium we are a bit unsure what that could/would be. We are not bringing it back as production servers and we are considering giving them away, if anyone wants them. It's not the most spiffy hardware, but being 2U rack servers they pack an ok amount of cpu and memory, they're about 3 years old perhaps. Ideas to what runs well on them? Or something one can use them as?

  Read the article

• memtest incorrectly recognizes my RAM

  - by Brendan Abel

  I recently built a computer and randomly got a couple blue screens. I've run memtest and one of the memory sticks consistently throws memtest errors, while the other does not. The odd part is, memtest lists the following settings for my RAM: RAM: 535 MHz DDR 107 / CAS 2.5-1-3-1 DDR1 128 bits But my RAM is DDR3 1600? Memtest also lists my cpu as AMD K8, even though it's K10. I've probably going to RMA the ram stick, but I just wanted to see if anyone had any insight into the weird memtest stats.

  Read the article

• How do I pick a motherboard?

  - by EpsilonVector

  When building your own computer one part was always a mystery to me: the motherboard. Picking a CPU/GPU/memory is easy- you just figure out where the various chips are in the low end to high end scale, do a little market research on what current games demand, and pick the parts from their respective continuums of low-to-high-end models. A mother board is more complicated though. Its features are not as obvious as "this motherboard is faster than that motherboard". Now you need to deal with part compatibilities, bus speeds, maybe power management stuff, etc. I'm interested in a short guide for selecting a motherboard, especially- what pitfalls to avoid (for example, can bus speed become a bottleneck?). To clarify: I'm not looking for motherboard recommendations. I'm looking for guidance regarding how to evaluate the fitness of a motherboard given the rest of the computer parts.

  Read the article

• How to diagnose a Windows XP hard crash

  - by Jon

  I have a 64-bit Windows XP machine which has hard crashed several times today. The symptoms are that the screen just goes blank, then the reboot cycle starts. There is no blue screen and even though it is switched on, no crash dump file is created. On all occasions it has happened during a period of high CPU/memory activity. I have run a full Dell diagnostics with no failures. Any ideas how to track this down further? Thanks.

  Read the article

• What can impact the throughput rate at tcp or Os level?

  - by Jimm

  I am facing a problem, where running the same application on different servers, yields unexpected performance results. For example, running the application on a particular faster server (faster cpu, more memory), with no load, yields slower performance than running on a less powerful server on the same network. I am suspecting that either OS or TCP is causing the slowness on the faster server. I cannot use IPerf , unless i modify it, because the "performance" in my application is defined as Component A sends a message to Component B. Component B sends an ACK to component A and ONLY then Component A would send the next message. So it is different from what IPerf does, which to my knowledge, simply tries to push as many messages as possible. Is there a tool that can look at OS and TCP configuration and suggest the cause of slowness?

  Read the article

• Is a PCIE X1 card for USB 3.0 worth it?

  - by lelouch

  I have a portable HDD on USB 3.0, and soon I'll have a 32gb flash drive on USB 3.0 as well. My motherboard is pretty old - and the next time I'll upgrade it is when I get a new CPU/mobo/ram. Slots on my mobo: PCIE X16 - For my GTX 260 2xPCI PCIE X1 I'm considering purchasing a PCI express X1 card like this - http://www.ebay.com.au/itm/PC-Laptop-2-USB3-0-Ports-PCI-E-PCI-Express-X1-Card-New-/280772000446?pt=AU_Networking&hash=item415f50babe Now the question: What are realistic (read/write) speeds I'll get in this setup, assuming I have 1 USB 3 device connected at a time, and the bottleneck is the PCIE?

  Read the article

• Outlook Express hangs when selecting multiple emails

  - by Javier Badia

  I'm using Outlook Express (6, I think) on Windows XP. Lately, it has been hanging. Sometimes this happens at startup (right after the main window with all the panes loads) and sometimes when selecting many emails (sometimes as low as three emails at once, sometimes at ten, it's not a fixed number). When this happens, msimn.exe starts to use 98-100% CPU and RAM usage shoots up very quickly, reaching hundreds of megabytes in half a minute. The message pane goes gray instead of showing the message contents. As I said, this sometimes happens right after the main window loads, sometimes when selecting many emails at once. I tried backing up everything, deleting the identities, creating a new one and restoring, but this still happens.

  Read the article

• File corruption

  - by firesoul

  Recently, almost every file I try to copy into my HDDs gets corrupted. When writing to the disk, some portion of the file is replaced by random bytes (Checked using Diff apps) There's no problem reading existing files. I'm pretty sure it's not the HDD, becasue I've tried another HDD (a brand new 1TB WD) and the problem still remains. I have an AMD Athlon 64 X2 CPU, an ASUS M2NE motherboard, 2 WD SATA II HDDs (320GB + 1TB) and 3GB of Corsair RAM. My OS is Windows 7 (64 bit) Now, what could be the cause of this? If it's the motherboard, can it be fixed by using a PCI SATA card?

  Read the article

• Setting up Ubuntu Server for hosting Java web applications

  - by Denis Hoss

  I'm trying to set up an Web Server running Ubuntu server to host some Java web applications, with MySQL running on it, an so on .. here is the tutorial I follow: perfect server ubuntu 11.10 The server configuration is: CPU S1155 INTEL Pentium G850 2.9GHz VGA 5GTs 3MB 65W MB Gigabyte GA-H77-D3H Ram 4x4Gb HDD 5x1TB Seagate (4 in RAID5 and 1 for Backup) The problem is that when I am trying to install the Server version of Ubuntu, when the installer asks me whether to activate ATA RAID Devices, and I click yes, he sees only that one, if I click no, he sees all 5 HDD's separate without any RAID, is this normal? I also tried to install the Desktop version on RAID5, but after restart, Ubuntu does't want to boot up, an underscore stands on the top of the screen. I am a newbie in servers and their configuration, in fact I am developer. I need a help from you guys.

  Read the article

• Home movie video browser

  - by Jim Hunziker

  I have a bunch of home movies that don't have useful filenames because they came straight off the camera. (I'm using Vista 64, by the way.) Picasa is pretty good for browsing through them and watching them, but it doesn't use my video card for rendering the videos. My CPU gets pegged at max usage, and full screen barely works. Windows Media Player or Quicktime works fine. Is there another application (like Picasa) that can be used for browsing through movies that both uses my video card and shows thumbnails of all the movies in my collection? I'd rather have something nicer than Windows Explorer. (The movies are h.264 AAC 1280x720.)

  Read the article

• I have my best computer ideas while sitting in church. You? [closed]

  - by Rolnik

  At the risk of posing a subjective question... Where/when are you when you come up with your best ideas? How do you enter that 'zen' state? Yes... necessarily these have to be computer ideas and not new ideas how to make waffles (unless it involves a CPU). Some kinds of ideas include: New software project; better way to organize data; What would look slick on the internet; How to break into the Coka-Cola mainframe and steal the Coke formula (just kidding) How about it. How/when do you get a load of inspiration/insight?

  Read the article

• How do I know if my disks are being hit with too many I/O reads or writes or both?

  - by Mark F

  I know a bit about disk I/O and bottlenecks relating to this especially when relating to databases. How do I really know what the max I/O numbers will be for my disks? What metric might be available to me for working out roughly (but needs to be a good approximation) of how much capacity (if you will) have I got left available in I/O. I've seen it before where things are bubbling along nicely and then all of a sudden, everything screams to a halt, and it ends up being an I/O bound problem. Is there a better way to predict when I/O is reaching its limits? This article was interesting but not giving the answer I desire. So, is my best bet surrounding just looking at 'CPU I/O WAIT'? There must be a more reactive method than this.

  Read the article

• "Cannot allocate memory" while no process seems to be using up memory

  - by omat

  I am not competent on server issues, any help is much appreciated. When try to start a python/django shell on a linux box, I am getting OSError: [Errno 12] Cannot allocate memory. free -m seems to confirm I am out of memory: total used free shared buffers cached Mem: 590 560 29 0 3 37 -/+ buffers/cache: 518 71 Swap: 0 0 0 But I cannot see what is eating up the memory with top or ps aux: PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1 root 20 0 24336 908 0 S 0.0 0.2 0:00.68 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0.0 0.0 0:04.85 ksoftirqd/0 How can I identify the leak? Thanks. BTW, I am not sure if it is relevant, but the machine I am talking about is an AWS EC2 instance with Ubuntu 12 running.

  Read the article

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

• Video encoding is very slow on Amazon EC2 instance

  - by Timka

  We are using Amazon EC2 m1.xlarge instance for video re-encoding and it looks like the actual encoding process takes a very long time. For an average 250mb video file it takes about an hour to encode. Intance: m1.xlarge (Xeon E5645 x 15gb ram) Windows Server 2008 R2 64-bit AviSynth version 2.5 (32bit) + ffms2 plugin (FFmpegSource 1.21) FFmpeg SVN-r13712 libavutil 3213056 libavcodec 3356930 libavformat 3411456 libavdevice 3407872 Number of parallel jobs is 3 Average CPU utilization ~96% Update#1 Source video: mp4/h.264 Parameters for ffmpeg: --enable-memalign-hack --enable-avisynth --enable-libxvid --enable-libx264 + --enable-libgsm --enable-libfaac --enable-libfaad --enable-liba52 + --enable-libmp3lame --enable-libvorbis --enable-libtheora --enable-pthreads + --enable-swscale --enable-gpl Video files encoded to mp4/h.264 with the following extra command line options: -threads 0 -coder 0 -bf 0 -refs 1 -level 30 -maxrate 10000000 -bufsize 10000000

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >