Search Results

Search found 5464 results on 219 pages for 'effect'.

Page 150/219 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

  • Feedback from SQLBits 8

    - by Peter Larsson
    This years SQLBits occurred in Brighton. Although I didn’t have the opportunity to attend the full conference, I did a presentation at Saturday. Getting to Brighton was easy. Drove to Copenhagen airport at 0415, flew 0605 and arrived at Gatwick 0735. Then I took the direct train to Brighton and showed up at 0830, just one hour before presenting. This was the easy part. Getting home was much worse. Presentation ended at 1030 and I had to rush to the train station to get back to London, change to tube for Heathrow. Made it at the gate just 15 seconds before closing. That included a half mile run in the airport… Anyway, yesterday I got the feedback for my presentation. It does look good, especially since English is not my first language. This is the first graph Seems to be just halfway between conference average and best session. I can live with that. Second graph shows more detail about attendees voting. It also look acceptable. A wider spread for the 9’s, but it is an inevitable effect from how attendees percept the session. I did get a lot of 8’s and the lower grades in an descending order. The two people voting 4 and 5 didn’t say why they voted this so I don’t know how to remedy this. Third graph is about each category of votes.   Again, I find this acceptable. The Session abstract and Speaker’s knowledge seems to follow attendees expectations compared to conference average. I seem to have met the attendees expectations (and some more) for the other four categories, also compared to conference average. Since this did encourage me, I believe I will present some more at future meetings. I do have a new presentation about something all developers are doing every day but they may not know it. I will also cover this new topic in the next Deep Dives II book. Stay tuned! //Peter

    Read the article

  • SQL Saturday 194 - Exeter

    - by Dave Ballantyne
    Many kudos goes to Jonathan and Annette Allen and the others on the team for confirming SQL Saturday 194 in Exeter on the 8th and 9th of March.  The event home page is here http://www.sqlsaturday.com/194/eventhome.aspx and I delighted that myself and Dave Morrison will be presenting a full day pre-con on the 8th on favourite subjects “TSQL and Internals”. Here is the full abstract : TSQL and internals - When faced with performance issues there are many lines of attack. Tuning the engine itself can get you so far, however for maximum effect you need to understand how the engine and how it translates SQL statements into performable actions. This is not a simple task, it is a massive task to deal with a multi-table join and the number of permutations can be immense. To back up this knowledge, we can create better performing TSQL and understand the impact that is has upon the engine and recognize the pitfalls and gotcha’s that exist in SQLServer. Ultimately, there is no ‘best way’ to perform a single task only many variations of ‘it depends’ , but now we can pick the most appropriate option for the required dataload. Over the years, there have been many myths and misconceptions have grown around the product, some have basis in older versions and some are just wrong. Continuing to build on the knowledge given so far these issue will be explored and broken down and proved or disproved. Finally we will look to the future and explore SQL Server 2012 and the new functionality that that brings and some of the common uses that we will be able to address. After completion of this days pre-con, attendees will have a more complete knowledge of execution plans, and how they relate to the physical and logical actions that SQLServer will be executing on their behalf. The attendees will also have a more rounded and fuller knowledge of TSQL and the implications of incorrectly defining a query. Dave is a fountain of knowledge on execution plans and optimizer internals and ,though i may flatter myself, I’m no shrinking violet when it comes to TSQL and such matters.  I hope that if you cant join us, then there are other pre-cons available from other experts in their fields that may ‘float you boat’ too.  The pre-con page is http://sqlsouthwest.co.uk/SQLSaturday_precon.htm Also, excitingly, this pre-con day is sponsored by Fusion-IO which is a great boon for the day. If you want a more of this then i am offering a 2 day TSQL course starting on the 19th of March. More details on this are available here

    Read the article

  • New computer hangs on shutdown/reboot, how to troubleshoot?

    - by Torben Gundtofte-Bruun
    My system is working perfectly but it freezes during shutdown/reboot/suspend/hibernate: All windows and the menu bar disappear but the desktop wallpaper remains. It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown console text. The system is brand-new and fully updated using Update Manager. How can I determine what is causing the freeze? Is there a log I can investigate? How can I fix this? I see no obvious cause of the freeze. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing shutdown right from the login screen). What I've tried so far: Based on other questions (this, this, and this) that suggest some ACPI settings, I've tried sudo shutdown -h now to see whether the shutdown console text display offers any hints, but the system doesn't even get that far - it still freezes while the screen shown the desktop background image, without any toolbars. Only sudo shutdown --force works, but that's not a solution. Editing the grub menu to add acpi=off to the kernel didn't help. I guess there's not much point in trying the other (lesser) ACPI suggestions? Adding noapic to the grub entry had no discernible effect. Adding nolapic instead did something (I had removed the quiet option) - the system managed to continue further with the shutdown, right until the line Checking for running unattended-upgrades: which were the last characters on the screen. I've also checked the system BIOS, especially regarding power options, but didn't see anything out of the ordinary. Switching the BIOS standby setting from S3 to S1 didn't help. The standby setting can't be disabled, and there are no other ACPI-related settings AFAIK. BIOS reset didn't help. Not surprised; hadn't changed anything. I tried going to a virtual console (CtrlAltF1) as suggested by djeikyb and from there did a shutdown -h now and it froze there too, after this console output. I didn't try killing processes one at a time because I'm still too newbie to figure out how to do that. Booting with kernel 2.6.35.22 rather than 2.6.35.25 didn't help. Disabling the Nvidia drivers didn't help. Booting from Live CD (USB stick in fact) didn't help; it freezes the same way. Booting from Live CD, with acpi=off noapic nolapic didn't help either. Neither did just nolapic. So evidently this is not some custom setting in my install, but some sort of basic issue. MemTest competed in 1 hour without errors.

    Read the article

  • SEO effects of intermix of WP blog, custom PHP site and FB app game

    - by melbournetechlover
    We're a melbourne tech company in the process of building a custom site in PHP. We plan to launch a "pre-launch" page which is also custom coded (CSS3 on twitter bootstrap framework + HTML5 front end and PHP back end). On that site will be a link to a blog - the idea behind this is to build up ranking for a variety of relevant keywords prior to the full site going live (given the majority of the site is a member only community anyway so the blog is really the main way we'll be able to execute on-site SEO. Ideally, we would like to install wordpress in a subdirectory on our servers and just customise the header to look the same as the landing page of the website. But some questions and concerns... Is there any detrimental effect on SEO efforts in having two separate systems (one custom PHP, the other an installation of wordpress) to manage the blog vs the rest of the site? Are there any benefits or detriments to installing on a sub domain such as blog.sitename.com vs. sitename.com/blog. My preference would be sitename.com/blog as it feels neater - but open to suggestions based on knowledge of Google preferences. Separately, we are building a Facebook app which is under another site name. Again because we are launching this app first, from an SEO perspective, would it actually be better to run it from a sub domain on the main site - e.g. gamename.mainsitename.com instead of on app.gamename.com? Currently we have it on app.gamename.com, but if there are SEO benefits to moving it to the other domain and server then we'll do it. Basically we don't want to have our SEO efforts divided - will Google algorithms prefer two sites heavily referring traffic, or is it better to focus our efforts on one. I guess that's the crux of the issue. But the other one is - does Google care about traffic accessing a page built for the Facebook app iFrame - does that count toward rankings? Sorry I hope these questions aren't too complex - but we're in the tech world every day and still can't seem to find a good answer to these ones...hence I'm taking to the forums!! Free beer for whoever can give me a solid answer!

    Read the article

  • How should I land my next consulting gig? [closed]

    - by MrOodles
    For the last couple of years, I've been working on speculative projects, expanding my skillset with side work, and paying the bills while having a blast consulting for startups. However, for a number of personal reasons, I need to spend the next 6-9 months maximizing my cash income. I want to put this into effect starting in early August. So that means I have one month to put the necessary client list/portfolio/resume together to start making this happen. As a programmer, I am very proficient in building Django web apps. I can write the necessary SQL, python, javascript, and css to build every part of a Django app, and then do the system administration necessary to deploy on AWS using EC2. I can also rig up a CDN to work seemlessly with the app using S3 and Cloudfront. I have built GIS applications using GeoDjango and PostGIS, and I have constructed social video apps by implementing Encoding.com as a service to prepare raw video files for consumption on the web. I am also moderately proficient in programming PHP, Java, and C#. I have built web apps in PHP, and desktop apps in Java and C#. I have dabbled with Android applications and iPhone apps, but nothing I would show off. I have experience doing SEO, social media marketing, and content marketing. Many of my clients have needed their apps promoted after they were built, and I was always happy to oblige when I could. I have also worked with biometrics technology including fingerprints for government contractors. This was as much a business analyst role as it was a programming gig, as I had to help answer RFPs, make checklists, and work around reems and reems of regulations to build applications that met very large bureaucratic requirements. I only have two real requirements for my next gig(s): 1) Work remotely. I live in North East Ohio, and I don't plan on leaving, but I wouldn't mind traveling one or two weeks out of every month to service clients who need on-site help. 2) $60.00hr-$∞ USD contracting rate. So what should I do for the next 30 days to achieve this? Should I target some large company and learn the requisite buzzwords to impress them? Should I learn some new language or technology? Polish some skill that I already have? Should I build something using my current skillset, or with some new technology? Should I put a website for my consultancy together to market myself? Should I do that using latest technology x, y, and z? Or should I just slap something up on Tumblr? I'm willing to do anything (moral) over the next 4 weeks to put myself into a position to maximize my income, and I'm open to all and every idea Programmers users may have. Let me hear them.

    Read the article

  • Homepage issue on Google [closed]

    - by nico
    We have recently updated our website www.blinds4uk.co.uk with a new homepage containing additional features and more on page content but since then we have lost primary keyword positions and the home page has disappeared completely. The only time it appears is for an exact search ‘blinds4uk’. Today I took snippets of 'unique content' from the homepage and put this into the 'google search' but our homepage was nowhere to be found. When I did the same in ‘Yahoo’ the homepage came up. Are we missing something? We ranked in the top 4 for primary kw terms 'blinds uk' & 'uk blinds' but now we don’t show anywhere for these terms. Our homepage has never ranked well for the primary kw 'blinds' yet our internal pages rank very well with many pages on page 1 of google uk. We employed an SEO firm for 9 months to help us establish issues with the homepage but they never could, so we got rid. We have been trying to get to the root cause of why the homepage ranks so poorly for a number of years and only yesterday we established that we had the meta tag directly below the tag and our title & meta description were further down the page; we have today corrected. Not sure what effect this would have on the way Google reads the homepage but we are trying everything to try and get the homepage ranking fro those primary kw's. Our current developers & ex SEO guys are all part of the same company and cannot pin-point anything other than saying carryon with their SEO team because it will take time but just comes across as a milking exercise. Another thing which I have found very strange is the data from our 'traffic audience'. We are a UK based website yet our traffic stats were showing as;- UK 36.6%, Denmark 35.8% and India 27.6%. – don’t make sense to me! Is there anybody out there that could simply point us in the right direction to the problem(s), so we can fix once and for all? Could there be anything within the code that is causing the home page not to display within google for our primary kw's terms such as blinds, window blinds etc. I would appreciate any advice at all that may help us in our quest to sort this homepage issue once and for all

    Read the article

  • Yet another frustum culling question

    - by Christian Frantz
    This one is kinda specific. If I'm to implement frustum culling in my game, that means each one of my cubes would need a bounding sphere. My first question is can I make the sphere so close to the edge of the cube that its still easily clickable for destroying and building? Frustum culling is easily done in XNA as I've recently learned, I just need to figure out where to place the code for the culling. I'm guessing in my method that draws all my cubes but I could be wrong. My camera class currently implements a bounding frustum which is in the update method like so frustum.Matrix = (view * proj); Simple enough, as I can call that when I have a camera object in my class. This works for now, as I only have a camera in my main game class. The problem comes when I decide to move my camera to my player class, but I can worry about that later. ContainmentType CurrentContainmentType = ContainmentType.Disjoint; CurrentContainmentType = CamerasFrustrum.Contains(cubes.CollisionSphere); Can it really be as easy as adding those two lines to my foreach loop in my draw method? Or am I missing something bigger here? UPDATE: I have added the lines to my draw methods and it works great!! So great infact that just moving a little bit removes the whole map. Many factors could of caused this, so I'll try to break it down. cubeBoundingSphere = new BoundingSphere(cubePosition, 0.5f); This is in my cube constructor. cubePosition is stored in an array, The vertices that define my cube are factors of 1 ie: (1,0,1) so the radius should be .5. I least I think it should. The spheres are created every time a cube is created of course. ContainmentType CurrentContainmentType = ContainmentType.Disjoint; foreach (Cube block in cube.cubes) { CurrentContainmentType = cam.frustum.Contains(cube.cubeBoundingSphere); ///more code here if (CurrentContainmentType != ContainmentType.Disjoint) { cube.Draw(effect); } Within my draw method. Now I know this works because the map disappears, its just working wrong. Any idea on what I'm doing wrong?

    Read the article

  • Draw images with warped triangles on a web server [migrated]

    - by epologee
    The scenario The Flash front end of my current project produces images that a web server needs to combine into a video. Both frame-rate and frame-resolution are sizeable enough that sending an image sequence to the back end is not feasible (in both time and client bandwidth). Instead, we're trying to recreate the image drawing on the back end as well. Correct and slow, or incorrect and fast The problem is that this involves quite a bit of drawing textured triangles, and two solutions we found in Python (here and there) are so inefficient, that the drawing takes about 60 seconds per frame, resulting in a whopping 7,5 hours of processing time for a 30 second clip. Unacceptable. When using a PHP-module to send commands to ImageMagick for image manipulation, the whole process is super fast (tenths of a second per frame), but ImageMagick seems to be unable to draw triangles the way we do it in the front end, so the final results do not match. Unacceptable. What I'm asking here, is if there's someone who would know a way to solve this issue, by any means necessary that would run on a web server. Warping an image Let me explain the process of the front end: Perform a Delaunay calculation on points in an image to get an evenly distributed mesh of triangles. Offset the points/vertices in the mesh, distorting or warping the image. Draw the warped triangles on a new bitmap. We can send the results (coordinates) of steps 1 and 2 to the back end, to then draw the warped triangles and save it to an image on disk (or append as a frame to the video). But that last step is what I need help with. The Question Is there an alternative to ImageMagick that can draw triangles in a bitmap? Is there some other library, like a C library, that would allow us to do this? Or could we achieve this effect more easily by switching back end technologies, like Ruby? (.Net and Java are, unfortunately, not really options right now) Many thanks. EP. P.S. I'd appreciate re-tagging efforts, I don't quite know what labels to put on this question. Thanks!

    Read the article

  • Why Java's JMF doesn't work in Linux?

    - by Visruth CV
    I got to do some image processing program in java using Linux. I chose to use the JMF for my camera (a webcam) access. But my program is not able to access the camera. But, the jmf works well in Windows. I downloaded jmf from oracle.com and I tried to install it in 'Ubuntu 10.10-the Maverick-released in October 2010 and supported until April 2012'. The downloaded file was a .bin file. I got the below output (last part of the output) when I tried the command provided by oracle /bin/sh ./jmf-2_1_1e-linux-i586.bin. For inquiries please contact: Sun Microsystems, Inc. 4150 Network Circle, Santa Clara, California 95054. LFI# 129621/Form ID#011801 Do you agree to the above license terms? [yes or no] yes Permit recording from an applet? (see readme.html) [yes or no] yes Permit writing local files from an applet? (recommend no, see readme.html) [yes or no] yes Unpacking... tail: cannot open `+309' for reading: No such file or directory Extracting... ./install.sfx.4140: 1: cannot open ==: No such file ./install.sfx.4140: 1: ==: not found ./install.sfx.4140: 3: Syntax error: ")" unexpected chmod: cannot access `JMF-2.1.1e/bin/jmstudio': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfregistry': No such file or directory chmod: cannot access `JMF-2.1.1e/bin/jmfinit': No such file or directory ./jmf-2_1_1e-linux-i586.bin: 305: JMF-2.1.1e/bin/jmfinit: not found /bin/cp: cannot stat `JMF-2.1.1e/lib/jmf.properties': No such file or directory Done. When try the same command again, getting nothing in the terminal (console). visruth@laptop:~/Desktop/mobileapps$ /bin/sh ./jmf-2_1_1e-linux-i586.bin visruth@laptop:~/Desktop/mobileapps$ Now, I'm not sure that whether it is properly installed or not.Whatever, I'm not getting camera access in my programme. I checked out the driver of the camera, it is available in the os itself I think because other softwares are able to access the camera (web cam). I tried it on both desktop and laptop, but no effect... Is there any solution for the problem?

    Read the article

  • Are closures with side-effects considered "functional style"?

    - by Giorgio
    Many modern programming languages support some concept of closure, i.e. of a piece of code (a block or a function) that Can be treated as a value, and therefore stored in a variable, passed around to different parts of the code, be defined in one part of a program and invoked in a totally different part of the same program. Can capture variables from the context in which it is defined, and access them when it is later invoked (possibly in a totally different context). Here is an example of a closure written in Scala: def filterList(xs: List[Int], lowerBound: Int): List[Int] = xs.filter(x => x >= lowerBound) The function literal x => x >= lowerBound contains the free variable lowerBound, which is closed (bound) by the argument of the function filterList that has the same name. The closure is passed to the library method filter, which can invoke it repeatedly as a normal function. I have been reading a lot of questions and answers on this site and, as far as I understand, the term closure is often automatically associated with functional programming and functional programming style. The definition of function programming on wikipedia reads: In computer science, functional programming is a programming paradigm that treats computation as the evaluation of mathematical functions and avoids state and mutable data. It emphasizes the application of functions, in contrast to the imperative programming style, which emphasizes changes in state. and further on [...] in functional code, the output value of a function depends only on the arguments that are input to the function [...]. Eliminating side effects can make it much easier to understand and predict the behavior of a program, which is one of the key motivations for the development of functional programming. On the other hand, many closure constructs provided by programming languages allow a closure to capture non-local variables and change them when the closure is invoked, thus producing a side effect on the environment in which they were defined. In this case, closures implement the first idea of functional programming (functions are first-class entities that can be moved around like other values) but neglect the second idea (avoiding side-effects). Is this use of closures with side effects considered functional style or are closures considered a more general construct that can be used both for a functional and a non-functional programming style? Is there any literature on this topic? IMPORTANT NOTE I am not questioning the usefulness of side-effects or of having closures with side effects. Also, I am not interested in a discussion about the advantages / disadvantages of closures with or without side effects. I am only interested to know if using such closures is still considered functional style by the proponent of functional programming or if, on the contrary, their use is discouraged when using a functional style.

    Read the article

  • How far should an entity take care of its properties values by itself?

    - by Kharlos Dominguez
    Let's consider the following example of a class, which is an entity that I'm using through Entity Framework. - InvoiceHeader - BilledAmount (property, decimal) - PaidAmount (property, decimal) - Balance (property, decimal) I'm trying to find the best approach to keep Balance updated, based on the values of the two other properties (BilledAmount and PaidAmount). I'm torn between two practices here: Updating the balance amount every time BilledAmount and PaidAmount are updated (through their setters) Having a UpdateBalance() method that the callers would run on the object when appropriate. I am aware that I can just calculate the Balance in its getter. However, it isn't really possible because this is an entity field that needs to be saved back to the database, where it has an actual column, and where the calculated amount should be persisted to. My other worry about the automatically updating approach is that the calculated values might be a little bit different from what was originally saved to the database, due to rounding values (an older version of the software, was using floats, but now decimals). So, loading, let's say 2000 entities from the database could change their status and make the ORM believe that they have changed and be persisted back to the database the next time the SaveChanges() method is called on the context. It would trigger a mass of updates that I am not really interested in, or could cause problems, if the calculation methods changed (the entities fetched would lose their old values to be replaced by freshly recalculated ones, simply by being loaded). Then, let's take the example even further. Each invoice has some related invoice details, which also have BilledAmount, PaidAmount and Balance (I'm simplifying my actual business case for the sake of the example, so let's assume the customer can pay each item of the invoice separately rather than as a whole). If we consider the entity should take care of itself, any change of the child details should cause the Invoice totals to change as well. In a fully automated approach, a simple implementation would be looping through each detail of the invoice to recalculate the header totals, every time one the property changes. It probably would be fine for just a record, but if a lot of entities were fetched at once, it could create a significant overhead, as it would perform this process every time a new invoice detail record is fetched. Possibly worse, if the details are not already loaded, it could cause the ORM to lazy-load them, just to recalculate the balances. So far, I went with the Update() method-way, mainly for the reasons I explained above, but I wonder if it was right. I'm noticing I have to keep calling these methods quite often and at different places in my code and it is potential source of bugs. It also has a detrimental effect on data-binding because when the properties of the detail or header changes, the other properties are left out of date and the method has no way to be called. What is the recommended approach in this case?

    Read the article

  • Upgrades from Beta or CTP SQL Server Software is NOT Supported

    - by BuckWoody
    As of this writing, SQL Server 2008 R2 has released, and just like every release, I get e-mails and calls from folks with this question: “Can I upgrade from Customer Technical Preview (CTP) x or Beta #x or Release Candidate (RC) to the “Released to Manufacturing” (RTM) version?” No. Right up until the last minute, things are changing in the code – and you want that to happen. Our internal testing runs right up until the second we lock down for release, and we watch the CTP/RC/Beta reports to make sure there are no show-stoppers, and fix what we find. And it’s not just “big” changes you need to worry about – a simple change in one line of code can have a massive effect. I know, I know – you’ve possibly upgraded an RC or CTP to the RTM version and it worked “just fine”. But hear this tale: I’ve dealt with someone who faced this exact situation in SQL Server 2008. They upgraded (which is clearly prohibited in the documentation) from a CTP to the RTM version over a year ago. Everything was working fine. But then…one day they had an issue. Couldn’t fix it themselves, we took a look, days went by, and we finally had to call in the big guns for support. Turns out, the upgrade was the problem. So we had to come up with some elaborate schemes to get the system migrated over while they were in production. This was painful for everyone involved. So the answer is still no. Just don’t do it. There is one caveat to this story – if you are a “TAP” customer (you’ll know if you are), we help you move from the CTP products to RTM, but that’s a special case that we track carefully and send along special instructions and tools to help you along. That level of effort isn’t possible on a large scale, so it’s not just a magic tool that we run to upgrade from CTP to RTM. So again, unless you’re a TAP customer, it’s a no-no. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • If most of team can't follow the architecture, what do you do?

    - by Chris
    Hi all, I'm working on a greenfields project with two other developers. We're all contractors, and myself and one other just started working on the project while the orginal one has been doing most of the basic framework coding. In the past month, my fellow programmer and I have been just frustrated by the design descisions done by our co-worker. Here's a little background information: The application at face value appeared to be your standard n-layered web application using C# on the 3.5 framework. We have a data layer, business layer and a web interface. But as we got deeper into the project we found some very interesting things that have caused us some troubles. There is a custom data access sqlHelper type base which only accepts dictionary key/valued entries and returns only data tables. There are no entity objects, but there are some massive objects which do everything and then are tossed into session for persitance. The general idea is that the pages (.aspx) don't do anything, while the controls (.ascx) do everything. The general flow is that a client clicks on a button, which goes to a user control base which passes a process request to the 'BLL' class which goes to the page processor, which then goes to a getControlProcessor, which at last actually processes the request. The request itself is made up of a dictionary which is passing a string valued method name, stored procedure name, a control name and possibly a value. All switching of the processing is done by comparing the string values of the control names and method names. Pages are linked together via a common header control that uses a combination of javascript and tables to create a hyperlink effect. And as I found out yesterday, a simple hyperlink between one page and another does not work because of the need to have quite a bit of information in session to determine which control to display on a page. My fellow programmer and I both believe that this is a strange and uncommon approach to web application development. Both of us have been in this business for over five years and neither of us have seen this approach. My question is this, how would we approach our co-worker and voice our concerns and what should we do if he does not want to accept the criteic? We both do not want to insult the work that has been done, but feel that going forward will create a nightmare for development. Thanks for your comments.

    Read the article

  • Iscroll Wrapper doesnt get a height

    - by MCSell
    I got the following code: <div data-role="content" height="100%" data-iscroll> <div class="homebutton_zeile"> <a id="picture_home" href="#pictrues"> <div class="homebutton_all"> <div class="homebutton_name">Picture</div> <div class="homebutton_picture"> <img src="images/picture.png" alt="image" style="position: relative;"> </div> </div> </a> </div> </div> </div> My Classes of CSS .homebutton_zeile{ width: 100%; height: 30%; } .homebutton_all{ width: 30%; height: 90%; float:left; margin-left: 2%; margin-top:15px; } .homebutton_picture{ position: relative; width: 100%; height: 85%; float: left; background-color: #AAC7BD; border: 1px solid black; border-radius: 15px; box-shadow:8px 8px 8px #666; } .homebutton_name{ text-align:center; position: relative; top:-10px; width: 100%; height: 15%; margin-left: auto; text-decoration:none; color:black; } I am Using: iscroll.js jquery 1.8.2 jquery mobile 1.2.0 jqery mobile iscrollview. And if its needed to know jstorage.js and fastclick.js But the div above is not getting a height at the wrapper of iscroll. There is also a login before and this page will be shown automatically after the login after a $.mobile.changePage("#home"); function. I tried to do it as first page before the function of changePage and it gave me the same effect. If i put a   for example after the <div data-role="content" height="100%" data-iscroll>&nbps; The Wrapper get a height of 15px for the &nbps; but not for the images inside.

    Read the article

  • How to implement a component based system for items in a web game.

    - by Landstander
    Reading several other questions and answers on using a component based system to define items I want to use one for the items and spells in a web game written in PHP. I'm just stuck on the implementation. I'm going to use a DB schema suggested in this series (part 5 describes the schema); http://t-machine.org/index.php/2007/09/03/entity-systems-are-the-future-of-mmog-development-part-1/ This means I'll have an items table with generic item properties, a table listing all of the components for an item and finally records in each component table used to make up the item. Assuming I can select the first two together in a single query, I'm still going to do N queries for each component type. I'm kind of fine with this because I can cache the data into memcache and check there first before doing any queries. I'll need to build up the items on every request they are used in so the implementation needs to be on the lean side even if they're pulled from memcache. But right there is where I feel confident about implementing a component system for my items ends. I figure I'd need to bring attributes and behaviors into the container from each component it uses. I'm just not sure how to do that effectively and not end up writing a lot of specialized code to deal with each component. For example an AttackComponent might need to know how to filter targets inside of a battle context and also maybe provide an attack behavior. That same item might also have a UsableComponent which allows the item to be used and apply some effect onto a different set of targets filtered differently from the same battle context. Then not every part of an item is an active part, an AttributeBonusComponent might need to only kick in when the item is in an equipped state or when displaying the item details page. Ultimately, how should I bring all of the components together into the container so when I use an item as a weapon I get the correct list of targets? Know when a weapon can also be used as an item? Or to apply the bonuses the item provides to a character object? I feel like I've gone too far down the rabbit hole and I can't grasp onto the simple solution in front of me. (If that makes any sense at all.) Likewise if I were to implement the best answer from here I feel like I'd have a lot of the same questions. How to model multiple "uses" (e.g. weapon) for usable-inventory/object/items (e.g. katana) within a relational database.

    Read the article

  • How do I prevent ISPs from killing downloads of files in mid-transfer?

    - by Gorchestopher H
    I run a small website with a few users, low traffic, mostly to share personal mp3 files with a small community. Depending on their ISP, my users can't always download or stream larger files. By larger I mean larger than 1MB. Essentially the host either stops sending, or the client stops receiving. One of the links along the connection chain simply ends its connection before the transfer completes Trace-route shows no connection issues. There are no connection issues with short transfers that don't take more than a few seconds. It's these 10 second transfers that just end up ending. Just doing a straight download with a direct link can yield this error if you have the wrong ISP. Strangely enough, this is most common with users with ISPs who are essentially independent providers that buy service via a fiber link. Unfortunately these providers aren't very knowledgeable, are unable to do any testing, and insist it's a problem with the host. I have gotten my host to transfer my site to different servers of their, to the same effect. Nearly identical sites (affiliate sites actually) experience no such issue. What can I be doing to further troubleshoot this matter? How can I prove that someone is dropping the ball, and identify who that party is? Can I do a 5Mb traceroute? EDIT Maybe I can clear up some misconceptions with my question: The files are not very large. They are simply over 2Mb. The users do not have "slow" connections, they are at least 5mbps. This "time out" happens very quickly, in the realm of 5 seconds, so I don't know if it's a timeout or not. The user often gets 1 or 2Mb in this chunk of time. I have tried streaming with a flash player. I have tried saving the target. Forcing the download. I have tried allowing the browser to stream the file. I have tried different browsers (FF, IE, Chrome). Users are able to download identical files when on different hosts.

    Read the article

  • SSMS Tools Pack 3.0 is out. Full SSMS 2014 support and improved features.

    - by Mladen Prajdic
    With version 3.0 the SSMS 2014 is fully supported. Since this is a new major version you'll eventually need a new license. Please check the EULA to see when. As a thank you for your patience with this release, everyone that bought the SSMS Tools Pack after April 1st, the release date of SQL Server 2014, will receive a free upgrade. You won't have to do anything for this to take effect. First thing you'll notice is that the UI has been completely changed. It's more in line with SSMS and looks less web-like. Also the core has been updated and rewritten in some places to be better suited for future features. Major improvements for this release are: Window Connection Coloring Something a lot of people have asked me over the last 2 years is if there's a way to color the tab of the window itself. I'm very glad to say that now it is. In SSMS 2012 and higher the actual query window tab is also colored at the top border with the same color as the already existing strip making it much easier to see to which server your query window is connected to even when a window is not focused. To make it even better, you can not also specify the desired color based on the database name and not just the server name. This makes is useful for production environments where you need to be careful in which database you run your queries in. Format SQL The format SQL core was rewritten so it'll be easier to improve it in future versions. New improvement is the ability to terminate SQL statements with semicolons. This is available only in SSMS 2012 and up. Execution Plan Analyzer A big request was to implement the Problems and Solutions tooltip as a window that you can copy the text from. This is now available. You can move the window around and copy text from it. It's a small improvement but better stuff will come. SQL History Current Window History has been improved with faster search and now also shows the color of the server/database it was ran against. This is very helpful if you change your connection in the same query window making it clear which server/database you ran query on. The option to Force Save the history has been added. This is a menu item that flushes the execution and tab content history save buffers to disk. SQL Snippets Added an option to generate snippet from selected SQL text on right click menu. Run script on multiple databases Configurable database groups that you can save and reuse were added. You can create groups of preselected databases to choose from for each server. This makes repetitive tasks much easier New small team licensing option A lot of requests came in for 1 computer, Unlimited VMs option so now it's here. Hope it serves you well.

    Read the article

  • Ubuntu 12.04 - PPTP VPN is the only Internet Access

    - by user212553
    I know this has been covered. I've read dozens of posts but still have questions. I have a work server whose traffic should never leave my house without encryption. The VPN is PPTP. Currently I have a cron job that checks the status of the ppp0 adapter each minute. If the connection drops, which it does fairly often, it shuts key components down. It's fairly easy to restart PPTP with "nmcli con up id 'myVPNServer'" but there's no assurance it will reconnect and I need a better way to stop traffic (other than killing apps) when ppp0 is down. The two options I've seen discussed are the firewall (UFW, Firestarter, IPTables) or the route tables. I could be easily swayed to consider the firewall option but I focused on the route tables since no new function needs to be started. My questions involve the way the route tables change and then specifics on rules. When I start the PPTP VPN the route tables change. That suggests that if the VPN drops, the table will change back, defeating my stated intent of preventing external traffic. How can I make "sticky" changes to the route table that will persist even if the VPN connection drops? Perhaps the check boxes "Ignore automatically obtained routes" or "Use this connection only for resources on it's network" (which are part of the VPN configuration options)? It would seem that, if I can force the active VPN route table to stay in effect, even when the VPN drops, that this will effectively kill any external traffic should the VPN drop. This will give me the latitude to run a routine to restart the VPN from the command line (assuming the route table rules don't prevent me re-establishing the connection). My route table, with the VPN active is (ip route list): Any comments on what 10.10.1.1 is? $ ip route list default dev ppp0 proto static 10.10.1.1 dev ppp0 proto kernel scope link src 10.10.1.11 VPN_Server_IP_Address via 192.168.1.1 dev eth0 proto static VPN_Server_IP_Address via 192.168.1.1 dev eth0 src 192.168.1.60 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.60 metric 1

    Read the article

  • Building Enterprise Smartphone App &ndash; Part 3: Key Concerns

    - by Tim Murphy
    This is part 3 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Keys Concerns Of Smartphones In The Enterprise These are the factors that you need to be aware of and address in order to build successful enterprise smartphone applications.  Most of them have nothing to do with the application itself as you will see here. Managing Devices Managing devices is a factor that is going to effect how much your company will have to spend outside of developing the applications.  How will you track the devices within the corporation?  How often will you have to replace phones and as a consequence have to upgrade your applications to support new phones?  The devices can represent a significant investment of capital.  If these questions are not addressed you will find a number of hidden costs throughout the life of your solution. Purchase or BYOD We have seen the trend of Bring Your Own Device (BYOD) lately within the enterprise.  How many meetings have you been in where someone is on their personal iPad, iPhone, Android phone or Windows Phone?  The issue is if you can afford to support everyone's choice in device? That is a lot to take on even if you only support the current release of each platform. Do you go with the most popular device or do you pick a platform that best matches your current ecosystem and distribute company owned devices?  There is no easy answer here, but you should be able give some dollar value to both hardware and development costs related to platform coverage. Asset Tracking/Insurance Smartphones are devices that are easier to lose or have stolen than laptops and desktops. Not only do you have your normal asset management concerns but also assignment of financial responsibility. You also will need to insure them against damage and theft and add legal documents that spell out the responsibilities of the employees that use these devices. Personal vs. Corporate Data What happens when you terminate an employee?  How do you recover the device?  What happens when they have put personal data on the device?  These are all situation that can cause possible loss of corporate intellectual property or legal repercussions of reclaiming a device with personal data on it.  Policies need to be put in place that protect the company from being exposed to type of loss.  This can mean significant legal and procedural cost that you need to consider. Coming Up In the last installment of this series I will cover application development considerations. del.icio.us Tags: Smartphones,Enterprise Smartphone Apps,Architecture

    Read the article

  • Properly create centered vertical navigation list with a hover image on both sides?

    - by Damainman
    I have a navigation list I placed inside of a , I am attempting to get an image that appears on both sides of a link when you hover. Basically a an arrow on each side of the link. I have managed to get the effect I am looking for with: <ul> <li style=""> <a href="#">Services</a> </li> <li> <a href="#">About</a> </li> <li> <a href="#">Media</a> </li> <li> <a href="#">FAQ</a> </li> <li> <a href="#">Portfolio</a> </li> <li> <a href="#">Contact</a> </li> </ul> .nav ul{ list-style:none; text-align:center; } .nav li:hover a:before, .nav li:hover a:after { content:url(../images/nav_bullet.png); } The end result will look like the following but with the list centered: link >> Hovered Link << link However I am not sure if that is the best way of going about it, and the image is too close to the text. I tried placing a margin and padding but that didn't work. To top of it off, the image is not vertically centered with the link text. Anyone know of a proper way to do this as I am just going by trial and error? Thank you in advance!

    Read the article

  • Why is my collision detection not accurate?

    - by optimisez
    After trying and trying, I still cannot understand why the leg of character exceeds the wall but no clipping issue when I hit the wall from below. How should I fix it to make him stand still on the wall? From collideWithBox() function below, it shows that playerDest.Y = boxDest.Y - boxDest.height; will get the position the character should standstill on the wall. Theoretically, the clipping effect won't be happen as the character hit the box from below works with the equation playerDest.Y = boxDest.Y + boxDest.height;. void collideWithBox() { if ( spriteCollide(playerDest, boxDest) && keyArr[VK_UP]) //playerDest.Y += 50; playerDest.Y = boxDest.Y + boxDest.height; else if ( spriteCollide(playerDest, boxDest) && !keyArr[VK_UP]) playerDest.Y = boxDest.Y - boxDest.height; } void initPlayer() { // Create texture. hr = D3DXCreateTextureFromFileEx(d3dDevice, "player.png", 169, 44, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &player); playerRect.left = playerRect.top = 0; playerRect.right = 29; playerRect.bottom = 36; playerDest.X = 0; playerDest.Y = 564; playerDest.length = playerRect.right - playerRect.left; playerDest.height = playerRect.bottom - playerRect.top; } void initBox() { hr = D3DXCreateTextureFromFileEx(d3dDevice, "brock.png", 330, 132, D3DX_DEFAULT, NULL, D3DFMT_A8R8G8B8, D3DPOOL_MANAGED, D3DX_DEFAULT, D3DX_DEFAULT, D3DCOLOR_XRGB(255, 255, 255), NULL, NULL, &box); boxRect.left = 33; boxRect.top = 0; boxRect.right = 63; boxRect.bottom = 30; boxDest.X = boxDest.Y = 300; boxDest.length = boxRect.right - boxRect.left; boxDest.height = boxRect.bottom - boxRect.top; } bool spriteCollide(Entity player, Entity target) { float left1, left2; float right1, right2; float top1, top2; float bottom1, bottom2; left1 = player.X; left2 = target.X; right1 = player.X + player.length; right2 = target.X + target.length; top1 = player.Y; top2 = target.Y; bottom1 = player.Y + player.height; bottom2 = target.Y + target.height; if (bottom1 < top2) return false; if (top1 > bottom2) return false; if (right1 < left2) return false; if (left1 > right2) return false; return true; }

    Read the article

  • How do I server multiple domains from the same directory and codebase without my configuraton breaking when apache.conf is overwritten?

    - by neokio
    I have 20 domains on a VPS running cPanel. One public_html is filled with code, the remaining 19 are symbolic links to that one. (For example, assets is a directory within public_html ... for the 19 others, there's a symbolic link to that directory in each each accounts public_html dir.) It's all PHP / MySQL database driven, with content changing depending on the domain. It works like a charm, assuming cPanel has suExec enabled correctly, and assuming apache.conf does NOT have SymLinksIfOwnerMatch enabled. However, every few weeks, my apache.conf is mysteriously overwritten, re-enabling SymLinksIfOwnerMatch, and disabling all 19 linked sites for as long as it takes for me to notice. Here's the offending line in apache.conf: <Directory "/"> AllowOverride All Options ExecCGI FollowSymLinks IncludesNOEXEC Indexes SymLinksIfOwnerMatch </Directory> The addition of SymLinksIfOwnerMatch disables the sites in a strange way ... the html is generated correctly, but all css/js/image in the html fails to load. Clicking any link redirects to /. And I have no idea why. I do have a few things in my .htaccess, which work fine when SymLinksIfOwnerMatch is not present: <IfModule mod_rewrite.c> # www.example.com -> example.com RewriteCond %{HTTPS} !=on RewriteCond %{HTTP_HOST} ^www\.(.+)$ [NC] RewriteRule ^ http://%1%{REQUEST_URI} [R=301,L] # Remove query strings from static resources RewriteRule ^assets/js/(.*)_v(.*)\.js /assets/js/$1.js [L] RewriteRule ^assets/css/(.*)_v(.*)\.css /assets/css/$1.css [L] RewriteRule ^assets/sites/(.*)/(.*)_v(.*)\.css /assets/sites/$1/$2.css [L] # Block access to hidden files and directories RewriteCond %{SCRIPT_FILENAME} -d [OR] RewriteCond %{SCRIPT_FILENAME} -f RewriteRule "(^|/)\." - [F] # SLIR ... reroute images to image processor RewriteCond %{REQUEST_URI} ^/images/.*$ RewriteRule ^.*$ - [L] # ignore rules if URL is a file RewriteCond %{REQUEST_FILENAME} !-f # ignore rules if URL is not php #RewriteCond %{REQUEST_URI} !\.php$ # catch-all for routing RewriteRule . index.php [L] </ifModule> I also use most of the 5G Blacklist 2013 for protection against exploits and other depravities. Again, all of this works great, except when SymLinksIfOwnerMatch gets added back into apache.conf. Since I've failed to find the cause of whatever cPanel/security update is overwriting apache.conf, I thought there might be a more correct way to accomplish my goal using group permissions. I've created a 'www' group, added all accounts to the group, and chmod -R'd the code source to use that group. Everything is 644 or 755. But doesn't seem to be enough. My unix isn't that strong. Do you need to restart something for group changes to take effect? Probably not. Anyways, I'm entering unknown territory. Can anyone recommend the right way to configure a website for multiple sites using one codebase that doesn't rely on apache.conf?

    Read the article

  • Telling subversion client to ignore certificate errors

    - by Pekka
    I have set up a copy of Redmine through the Bitnami Redmine Stack and am having trouble accessing a remote SVN repository through https. The trouble seems to be related to the fact that I don't have a signed certificate, and the certificate provided doesn't match the host name (I am accessing the same server through a number of host names). I am new to Ruby, Mongrel, Rails and Redmine. Following the advice in this forum thread, I changed the path Redmine uses to invoke the svn client in \apps\redmine\lib\ redmine\scm\adapters\subversion_adapter.rb from SVN_BIN = "svn" to SVN_BIN = "svn --trust-server-cert --non-interactive --config-dir c:/user/temp" I was hoping that the --trust-server-cert option would fix the certificate problem. However, I am still getting the following error message in mongrel.log: svn: OPTIONS of 'https://server.xyz:8443/svn/reponame': Server certificate verification failed: certificate issued for a different hostname, issuer is not trusted (https://server.xyz:8443) Does anybody know what to do about this? Additional info: I re-started the mongrel service after each change I am sure the configuration change has taken effect because subversion has created a full configuration directory in c:\user\temp I can access the remote repository using command line svn no problem The remote repository runs on a Windows box with VisualSVN

    Read the article

  • Outlook 2007 unable to connect to exchange server

    - by mattwarren
    I came into the office a week ago and outlook has refused to connect ever since, it just says "Disconnected" in the bottom right-hand corner. I've tried restarting it, rebooting Windows etc. I'm the only one if our office who is having this problem, so it's not a general problem with the server. Things I've tried Pinging the server via IP address and host name, both work fine Connecting via OWA, this works using the same machine name Connecting to Exchange via HTTP ("Outlook Anywhere") doesn't work None of the suggestions in this question helped, http://serverfault.com/questions/21755/can-ping-exchange-server-cant-connect-outlook-to-it Disabling Windows firewall on my laptop also has no effect. There are no items in the event viewer that indicate that anything it up. Also no permissions have changed on the server since when it worked. Update: I've just tried logging onto a completely different PC, using my domain controller user-name/password. When I setup outlook on there it also fails, so the problem isn't specific to 1 pc/outlook it's something about my particular user name, but not when using OWA? What else can I do to diagnose this, any suggestions?

    Read the article

  • Improving VPN performance - stronger encryption = more performance?

    - by Seth
    I have a site-to-site VPN set up with two SonicWall's (a TZ170 and a Pro1260). It was suggested to me that turning off encryption (so the VPN is tunneling only) would improve performance. (I'm not concerned with security, because the VPN is running over a trusted line.) Using FTP and HTTP transfers, I measured my baseline performance at about 130±10 kB/s. The Ipsec (Phase 2) Encryption was set to 3DES, so I set it to "none". However, the effect was opposite -- the performance dropped to 60±30 kB/s, and the transfers stall for about 25 seconds before any data comes down the line. I tried AES-128 and the throughput went UP to 160±5 kB/s. The rated speed of my line is 193 kB/s (it's a T1). Contrary to what I would think, stronger Ipsec encryption seems to improve throughput. Can anyone explain what might be going on here? Why would no encryption cause poor and highly variable performance, and cause transfers to stall? Why does AES-128 improve performance?

    Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >