Search Results

Search found 14158 results on 567 pages for 'jack in the box'.

Page 150/567 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Windows 7 Windows XP mode cannot run - it says "Require Hardware Assisted Virtualization"

  - by Jian Lin

  After installing the 2 files for Windows 7 Windows XP mode, the Start Menu now has Windows Virtual PC Windows XP Mode but clicking on the first merely brings out a folder, and clicking on the second brings out a dialog box that says: "Require Hardware Assisted Virtualization" Does that mean the machine cannot support Windows 7 Windows XP mode? I am running Win 7 Ultimate 64 bit edition. This is the dialog box: Update: the computer is an HP TouchSmart, with American Megatrends BIOS v02.61. I looked into the BIOS set up but it is quite simple and dosen't have something for "hardware assisted virtualization". The CPU is Intel Core 2 Duo T5750.

  Read the article

• What's causing Remote Access error 807 using rasdial.exe to connect to a PPTP VPN?

  - by Dylan Beattie

  I'm using rasdial.exe to connect an offsite server to our VPN. Remote box is a Windows 2008 x64 server; the VPN host at this end is a Watchguard Firebox x750e running Fireware 10.2 It connects fine about 20-30% of the time. The rest of the time I get: Remote Access error 807 - The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. Please try to reconnect to the VPN server. If this problem persists, contact the VPN administrator and analyze quality of network connectivity. For more help on this error: Type 'hh netcfg.chm' In help, click Troubleshooting, then Error Messages, then 807 The VPN isn't full, and it's 100Mb dedicated fibre on both ends so I can't believe it's a connectivity issue - especially since I'm RDP'ed into the remote box whilst trying to do this! Any bright ideas as to what might be causing the problem? Thanks, Dylan

  Read the article

• LVS TCP connection timeouts - lingering connections

  - by Jon Topper

  I'm using keepalived to load-balance connections between a number of TCP servers. I don't expect it matters, but the service in this case is rabbitmq. I'm using NAT type balancing with weighted round-robin. A client connects to the server thus: [client]-----------[lvs]------------[real server] a b If a client connects to the LVS and remains idle, sending nothing on the socket, this eventually times out, according to timeouts set using ipvsadm --set. At this point, the connection marked 'a' above correctly disappears from the output of netstat -anp on the client, and from the output of ipvsadm -L -n -c on the lvs box. Connection 'b', however, remains ESTABLISHED according to netstat -anp on the real server box. Why is this? Can I force lvs to properly reset the connection to the real server?

  Read the article

• Using a TS-Gateway through a Apache reverse-proxy

  - by Helder

  Hey all, I've set up a Windows 2008 server as Terminal Services Gateway, to funnel the RDP access to a bunch of backend servers. However, since I only need to publish SSL to the "outside", I've tried to publish it with our reverse proxy, but it's not working. The Apache box is timing out, while trying to reach the tsgateway. However, if I ping it straight from the same box, there is connectivity. I've read a bit, and with ISA 2006 you can publish TS-Gateways on the internet, so I was wondering it anyone ever got it working with an Apache reverse proxy instead :)

  Read the article

• Set up basic Windows Authentication to connect to SQL Server 2008 from a small, trusted network

  - by Margaret

  I'm guessing that this is documented somewhere on Microsoft's site, but thus far I haven't found it. I'm trying to set up a Windows Server 2008 box to have SQL Server 2008 with Windows Authentication (Mixed Mode, actually, but anyway) for work. We have a number of client machines that will need access to the databases, and I would like to keep configuration as simple as feasible. Here's what I've done so far: Install SQL Server 2008 selecting Mixed Mode Create a new 'Standard' (rather than Administrator) Windows login entitled "UserLogin" (with intent to use it as the access account) Create an SQL Server Login for Server\UserLogin and assign it 'Windows Authentication' Log in as UserLogin, check that I'm able to connect to SQL Server using WIndows Authentication, then log out again Start on the first client (Windows XPSP2, SQL Server 2005): Run C:\WINDOWS\system32\rundll32.exe keymgr.dll, KRShowKeyMgr Click "Add", enter the server name in the box, Server\UserLogin in the Username, and UserLogin's password in the Password field. Click "Ok" then "Close" Attempt to access SQL Server 2005 using Windows authentication. Succeed. Confetti! Start on the second client (Windows 7, SQL Server 2008): Run C:\WINDOWS\system32\rundll32.exe keymgr.dll, KRShowKeyMgr Click "Add", enter the server name in the box, Server\UserLogin in the Username, and UserLogin's password in the Password field. Click "Ok" then "Close" Attempt to access SQL Server 2008 using Windows authentication. Receive an error "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication" Assume that this translates to "You can't have two connections from the same account" (Yes, I know that doesn't make sense, but I'm a bit like that) Go back to the server, create a second Windows account, give it SQL Server rights. Go back to the second client, create a new passkey for the second login, try logging in again. Continue to receive the same error. Is this all overly complex and there's an easy way to do what I'm trying to accomplish? Or am I missing some ultra-obvious step that would make everything behave as desired? Most of the stuff that's coming up when I try to Google seems to be along the lines of "My ASP.NET application isn't working!", which obviously isn't all that much use.

  Read the article

• Thomson TCM 420 internal firewall deactivation

  - by KB22

  Hi all, I'm having a really hard time with getting a box into active torrent mode. Windows firewall etc. is done, the actual problem seems to relate to the cable modem which is used to connect the box to the net. It's a Thomson TCM 420 which 'claims' to have an internal firewall. IMHO this internal FW keeps me from using the port I opened for torrenting. To cut it short: is there a way to disable that firewall? The web administration interface of the modem does not provide that option. thanks in advance K

  Read the article

• Emails forwarded via postfix get flagged as spam and forged in Gmail

  - by Kendall Hopkins

  I'm trying to setup a forwarding only email server. I'm running into the problem where all messages forwarded via postfix are getting put into gmail's spam folder and getting flagged as forged. I'm testing a very similar setup on a cpanel box and their forwarded emails make it through without any problem. Things I've done: Setup reverse dns on forwarding box Setup SPF record for forwarding box domain CPanel route (not flagged as spam): [email protected] - [email protected] - [email protected] AWS postfix route (flagged as spam): [email protected] - [email protected] - [email protected] Gmail error message: /etc/postfix/main.cf myhostname = sputnik.*domain*.com smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no append_dot_mydomain = no readme_directory = no myorigin = /etc/mailname mydestination = sputnik.*domain*.com, localhost.*domain*.com, , localhost relayhost = mynetworks = 127.0.0.0/8 10.0.0.0/24 [::1]/128 [fe80::%eth0]/64 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all virtual_alias_maps = hash:/etc/postfix/virtual Email forwarded by CPanel (doesn't get marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14396obb; Wed, 9 May 2012 09:18:36 -0700 (PDT) Received: by 10.182.52.38 with SMTP id q6mr1137571obo.8.1336580316700; Wed, 09 May 2012 09:18:36 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from web6.*domain*.com (173.193.55.66-static.reverse.softlayer.com. [173.193.55.66]) by mx.google.com with ESMTPS id ec7si1845451obc.67.2012.05.09.09.18.36 (version=TLSv1/SSLv3 cipher=OTHER); Wed, 09 May 2012 09:18:36 -0700 (PDT) Received-SPF: neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=173.193.55.66; Authentication-Results: mx.google.com; spf=neutral (google.com: 173.193.55.66 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f43.google.com ([209.85.212.43]:56152) by web6.*domain*.com with esmtps (TLSv1:RC4-SHA:128) (Exim 4.77) (envelope-from <mail@*personaldomain*.com>) id 1SS9b2-0007J9-LK for mail@kendall.*domain*.com; Wed, 09 May 2012 12:18:36 -0400 Received: by vbbfq11 with SMTP id fq11so599132vbb.2 for <mail@kendall.*domain*.com>; Wed, 09 May 2012 09:18:35 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=Hr0AH40uUtx/w/u9hltbrhHJhRaD5ubKmz2gGg44VLs=; b=IBKi6Xalr9XVFYwdkWxn9PLRB69qqJ9AjUPdvGh8VxMNW4S+hF6r4GJcGOvkDn2drO kw5r4iOpGuWUQPEMHRPyO4+Ozc9SE9s4Px2oVpadR6v3hO+utvFGoj7UuchsXzHqPVZ8 A9FS4cKiE0E0zurTjR7pfQtZT64goeEJoI/CtvcoTXj/Mdrj36gZ2FYtO8Qj4dFXpfu9 uGAKa4jYfx9zwdvhLzQ3mouWwQtzssKUD+IvyuRppLwI2WFb9mWxHg9n8y9u5IaduLn7 7TvLIyiBtS3DgqSKQy18POVYgnUFilcDorJs30hxFxJhzfTFW1Gdhrwjvz0MTYDSRiGQ P4aw== MIME-Version: 1.0 Received: by 10.52.173.209 with SMTP id bm17mr326586vdc.54.1336580315681; Wed, 09 May 2012 09:18:35 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:18:35 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:18:35 -0400 Message-ID: <CA+tP6Viyn0ms5RJoqtd20ms3pmQCgyU0yy7GBiaALEACcDBC2g@mail.gmail.com> Subject: test5 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@kendall.*domain*.com Content-Type: multipart/alternative; boundary=bcaec51b9bf5ee11c004bf9cda9c X-Gm-Message-State: ALoCoQm3t1Hohu7fEr5zxQZsC8FQocg662Jv5MXlPXBnPnx2AiQrbLsNQNknLy39Su45xBMCM47K X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - web6.*domain*.com X-AntiAbuse: Original Domain - kendall.*domain*.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - *personaldomain*.com X-Source: X-Source-Args: X-Source-Dir: --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/plain; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c Content-Type: text/html; charset=ISO-8859-1 test5 --bcaec51b9bf5ee11c004bf9cda9c-- Email forwarded via AWS postfix box (marked as spam): Delivered-To: *personaluser*@gmail.com Received: by 10.182.144.98 with SMTP id sl2csp14350obb; Wed, 9 May 2012 09:17:46 -0700 (PDT) Received: by 10.229.137.143 with SMTP id w15mr389471qct.37.1336580266237; Wed, 09 May 2012 09:17:46 -0700 (PDT) Return-Path: <mail@*personaldomain*.com> Received: from sputnik.*domain*.com (sputnik.*domain*.com. [107.21.39.201]) by mx.google.com with ESMTP id o8si1330855qct.115.2012.05.09.09.17.46; Wed, 09 May 2012 09:17:46 -0700 (PDT) Received-SPF: neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) client-ip=107.21.39.201; Authentication-Results: mx.google.com; spf=neutral (google.com: 107.21.39.201 is neither permitted nor denied by best guess record for domain of mail@*personaldomain*.com) smtp.mail=mail@*personaldomain*.com Received: from mail-vb0-f52.google.com (mail-vb0-f52.google.com [209.85.212.52]) by sputnik.*domain*.com (Postfix) with ESMTP id A308122AD6 for <mail@*personaldomain2*.com>; Wed, 9 May 2012 16:17:45 +0000 (UTC) Received: by vbzb23 with SMTP id b23so448664vbz.25 for <mail@*personaldomain2*.com>; Wed, 09 May 2012 09:17:45 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=mime-version:x-originating-ip:date:message-id:subject:from:to :content-type:x-gm-message-state; bh=XAzjH9tUXn6SbadVSLwJs2JVbyY4arosdTuV8Nv+ARI=; b=U8gIgHd6mhWYqPU4MH/eyvo3kyZsDn/GiYwZj5CLbs6Zz/ZOXQkenRi7zW3ewVFi/9 uAFylT8SQ+Wjw2l6OgAioCTojfZ58s4H/JW+1bu460KAP9aeOTcZDNSsHlsj0wvH5XRV 4DQJa11kz+WFVtVVcFuB33WVUPAgJfXzY+pSTe+FWsrZyrrwL7/Vm9TSKI5PBwRN9i4g zAZabgkmw1o2THT3kbJi6vAbPzlqK2LVbgt82PP0emHdto7jl4iD5F6lVix4U0dsrtRv xuGUE0gDyIwJuR4Q5YTkNubwGH/Y2bFBtpx2q1IORANrolWxIGaZSceUWawABkBGPABX 1/eg== MIME-Version: 1.0 Received: by 10.52.96.169 with SMTP id dt9mr282954vdb.107.1336580265812; Wed, 09 May 2012 09:17:45 -0700 (PDT) Received: by 10.220.191.134 with HTTP; Wed, 9 May 2012 09:17:45 -0700 (PDT) X-Originating-IP: [99.50.225.7] Date: Wed, 9 May 2012 12:17:45 -0400 Message-ID: <CA+tP6VgqZrdxP543Y28d1eMwJAs4DxkS4EE6bvRL8nFoMkgnQQ@mail.gmail.com> Subject: test4 From: Kendall Hopkins <mail@*personaldomain*.com> To: mail@*personaldomain2*.com Content-Type: multipart/alternative; boundary=20cf307f37f6f521b304bf9cd79d X-Gm-Message-State: ALoCoQkrNcfSTWz9t6Ir87KEYyM+zJM4y1AbwP86NMXlk8B3ALhnis+olFCKdgPnwH/sIdzF3+Nh --20cf307f37f6f521b304bf9cd79d Content-Type: text/plain; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d Content-Type: text/html; charset=ISO-8859-1 test4 --20cf307f37f6f521b304bf9cd79d--

  Read the article

• Hardware selection for Linux machine

  - by bguiz

  Hi, I am building a new box, and planning to install Ubuntu 9-04 or Ubuntu 9-10 on it. I am wary of the hardware selection because in the past I struggled with lack of drivers or driver incompatibility with the network card and video card, etc. The last time I built a Linux box was 2007, and I have not kept up to date with the changes since. One notable difference is that I can no longer find motherboards with nVidia chip sets. See what I mean (links to my local shop's website): Intel motherboards: http://www.centrecom.com.au/catalog/default.php?page=1&cPath=36_62 AMD motherboards: http://www.centrecom.com.au/catalog/default.php?page=1&cPath=36_63 I have already checked the Ubuntu forums, but their motherboards section is rather outdated, and I did not look further. I would like to know your suggestions for what Linux compatible hardware that you have got. Thank you!

  Read the article

• Problem using psexec to remotely GAC a file

  - by Andrew Dunaway

  As part of a deployment process I am trying to GAC a series of files. The actual build process occurs on a build server, and I am trying to use psexec to GAC the files on whichever machine has requested the build. The current line I am trying to execute is: C:\PsToolspsexec.exe \COMPUTER -u USER -p PASS gacutil.exe -i Assembly.dll -f The error that I am getting back is: Failure adding assembly to the cache: The system cannot find the file specified. So apparently the dll reference is on the remote box, and unfortunately the dll is sitting on the build box. Is there any way to just do this with psexec somehow, or do I need to copy it to some temporary location on the \\COMPUTER? I know there are commands to copy the executable as part of the psexec process, but I can't seem to find anything similar for supporting files.

  Read the article

• Why are 32-bit application pools more efficient in IIS? [closed]

  - by mhenry1384

  I've been running load tests with two different ASP.NET web applications in IIS. The tests are run with 5,10,25, and 250 user agents. Tested on a box with 8 GB RAM, Windows 7 Ultimate x64. The same box running both IIS and the load test project. I did many runs, and the data is very consistent. For every load, I see a lower "Avg. Page Time (sec)" and a lower "Avg. Response Time (sec)" if I have "Enable 32-bit Applications" set to True in the Application Pools. The difference gets more pronounced the higher the load. At very high loads, the web applications start to throw errors (503) if the application pools are 64-bit, but they can can keep up if set to 32-bit. Why are 32-bit app pools so much more efficient? Why isn't the default for application pools 32-bit?

  Read the article

• Sending ctrl-backslash from Windows to Linux using Synergy

  - by jrbushell

  I'm using Synergy+ to share the keyboard and mouse between a Windows and a Linux (Red Hat) PC. The Windows box is the server, Linux is the client, and both are running version 1.3.4. My Windows box is set up for English UK keyboard. In a Linux terminal window, Ctrl+\ (backslash) sends a quit signal to the currently running program - useful to kill a Python script that's run amok, for example. When I try to do this via synergy, Ctrl+- (minus) is sent instead. This has the undesired effect of resizing my terminal window :( Backslash on its own and Shift-backslash = pipe both work fine. Any ideas what's happening?

  Read the article

• SQL Server 2008 to Sybase Linked Server (x64) -- Provider and permissions issues

  - by Cory Larson

  Good morning, We're testing a new SQL Server 2008 setup (64-bit) and one of our requirements was to get a linked server up and talking to a Sybase database. We've successfully done so using Sybase's 64-bit 15.5 drivers, however I can't expand the catalog list from a remote machine (connecting to the '08 box with SSMS) without having my network account being added as an Administrator on the actual box and then using Windows Authentication to connect to the server instance. This is going to be problematic when we go live. Has anybody experienced this, or have any input on the permissions in SQL Server 2008 with regards to linked servers? If I remove my network account from the Administrators group, the big error I'm getting is a 'Msg 7302, Level 16, State 1, Line 41' with a description something like "Cannot create an instance of OLE DB provider "ASEOLEDB" for linked server "", and all research points to permissions issues. Thoughts? This document talks about DCOM configuration and permissions, but we've tried all of it with no luck. Thanks

  Read the article

• AIX: iscsi volumes disappear after reboot

  - by Dan

  We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

  Read the article

• configure spam assassin to delete all spam above a score domain wide and override individual settin

  - by Marlon

  Okay, so this is my scenario and what I want to try and do. I maintain a Red Hat email server running qmail and spamassassin. I have a domain that has well over 100 email account each with individual settings for spam scores and, whether or not to delete email incoming mail deemed spam. What I want to accomplish is to change all those email email accounts to say a more stringent spam score value, AND to enable the deletion of email immediately as it flagged as such, for EACH AND EVERY email box. In short, I want to be able to override a user's individual settings spam settings, with my own. Short of tediously going into each and every email box one by one, is there an way to do this all in one fell swoop? Any advice would be greatly appreciated! :-)

  Read the article

• Windows Server 2008 x86 Services for Unix SDK (SUA) RSH

  - by Andy Arismendi

  Running RSH commands on a Windows box against a Linux box works only for the administrator user. Is there a file somewhere that has a list of users that can run commands remotely? More Info The server configuration is automated by VMware's product... There's no /etc/hosts.equiv file setup but there is a /root/.rhosts file with an entry of [IP ADDRESS] +. The SUA client C:\Windows\SUA\bin\rsh can login when run as the local administrator account but no other user can login. The error is: rcmd: unknown user: [username]. The command I'm trying to run is: rsh -l root [IP ADDRESS] ls.

  Read the article

• PortForwarding to IIS in Linux

  - by Simon

  Hi, I am trying to set up port forwarding on a linux box to a IIS webserver on my internal network. The web server sits on Windows 2003 Server. My linux box has eth0 - Internet connection eth1 - internal subnet (10.10.10.x) eth2 - 2nd internal subnet (129.168.0.x) dhcp interface my webserver is on the eth2 interface (192.168.0.6) I am doing port forwarding for port 80 with no avail. I use the same set of rules to port forward to a different webserver and it works. The webapplication is available on the internal network but not for external users. iptables -t nat -A PREROUTING -p tcp -i eth0 -d $PUBLIC_IP --dport 80 -j DNAT --to 192.168.0.6:80 iptables -A FORWARD -p tcp -i eth0 -o eth2 -d 192.168.0.6 --dport 80 -m state --state NEW -j ACCEPT iptables -A FORWARD -t filter -o eth0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -t filter -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Any Ideas?

  Read the article

• Just want to send emails from my Ubuntu Server. What simple SMTP server solution to use?

  - by Sergio Oliveira Jr.

  Basically I have a Ubuntu Server machine and I would like an idiot-proof solution for sending emails from my website that is also running in this same machine. My doubts are: 1) Should I use postfix or there are more simple solutions for an smtp server? 2) Do I need to be able to receive emails as well? I just want to send emails... 3) I did I simple test with postfix that came with my Ubuntu server and the email got sent, but it went to the spam box of my gmail. Anyway to avoid the spam box? 4) The email sender was [email protected]. How do I change that? Thanks very much! -Sergio

  Read the article

• Justifying a memory upgrade

  - by AngryHacker

  My employer has over a thousand servers (running SQL Server 2005 x64 and a couple of other apps) all across the country. And in my opinion they are all massively underpowered for what they need to do. Specifically, I feel that the servers simply do not have enough RAM for the amount of volume the machines are asked to do. All the servers currently have 6GB of RAM. The users are pretty much always complaining about performance (mostly because, immo, the server dips into the paging file quite often). I finally convinced the powers that be to at least try out a memory upgrade on one box and see the results. However, they want before and after metrics, so that they can see that the expense will be justified. My question is what metrics should I collect to see whether the performance truly improves on the box? I am a dev, so I am not sure how and what to collect (i have a passing knowledge of Perfmon).

  Read the article

• Windows SBS 2003 DNS taking over network

  - by Simon

  I have Windows Small Business Server 2003 premium edition on my new server box, this hosts a webapp on IIS. It has set up a DNS Server to solve requests to the webapp. I have a linux server/router that has does DNAT and portforwards port 80 to the new box. My linux router serves as a firewall and dhcp When i plug the SBS2003 server to the network, it leaves everyone on my network without web browsing, it looks like the DNS requests are going to the new server. I configured the DNS forwarders on SBS2003 to my ISP dns but it doesnt work... Is there something i am missing?

  Read the article

• Windows Server 2003 Licensing

  - by Phil

  Hi all, I'm looking to get a Windows Server 2003 box in the middle of my linux network. :( I'm just concerned about CAL licensing for it. No devices will access any network server function of Windows Server 2003. I don't need Windows for DHCP or DNS or file and print sharing. I have linux boxes to do that! xD I just need a box running Windows (of some variety) to host those few apps that have to run on Windows like my AV management console. In short do I need any CALs for my server if its not acting as server itself. I think Windows Server 2003 comes with 5 CALs which can be per user for the admins to use RDP? Thanks, Phil

  Read the article

• How do I elevate privileges when running appcmd from a nant task?

  - by Rune

  We are using a Windows 7 box as build server. As part of our continuous integration process I would like to stop and start an IIS 7 website. I have tried doing this from the command line using appcmd: appcmd start site "my website" However, this only works if I start the console window by choosing "Run as Administrator", so it won't work out-of-the-box from NAnt etc. How do I script appcmd to be run with elevated privileges (or am I going about this in the wrong way)? Thank you.

  Read the article

• local app opening instead of ssh forwarded app over x

  - by The Journeyman geek

  i have a custom install of ubuntu 9.10 - xorg intel and its deps, icewm, xde and swiftfox from the swiftfox repos. I'm trying to start a ssh forwarded session of swiftfox from another system - which has the plain vanilla firefox version in the repos- with ssh -x [ipaddress] and then starting swiftfox from command line. When i start it though, it opens up the local copy of firefox instead of the copy of swiftfox on the other box. I have NO idea what's wrong...swiftfox dosen't open on the remote box, i am definately on the remote boxes terminal, and there's no way whatsoever it should open a local copy. I'm wondering what's wrong

  Read the article

• windows 2003 remote desktop fail connect after windows update

  - by bookstorecowboy

  I have a number of windows servers, both win2003, win2003r2 and win2003r2 64 bit. After installing windows updates on the machines and rebooting terminal services give me an immediate "not connect" message. The servers are running fine and you can connect via the physical machine. Once you reboot the box (with remote restart in some cases when it's not accessible) terminal services behaves itself and allows a connection. Whilst it's not a show stopper it is rather annoying when you can't see your box. Anyone know why this is or what the cause is?

  Read the article

• SharePoint Server 2007 Stops Responding to External Requests

  - by Mountain Deux

  We have a SharePoint2007 server running on a Windows Server 2003 Box. The box itself is quite old but has not experienced any weird issues. Recently SharePoint has begun to show some strange behavior. One of the most annoying things is that once in a while, the sharepoint sever stops responding to requests outside our network. Internally, you can still browse everything that has to do with sharepoint but outside, nothing. If i reset the server it will start responding again. I am just not sure what makes it stop responding to users on the outside in the first place. Resetting the WWW publishing service does no good.

  Read the article

• Linked vSphere servers preventing cloning?

  - by brian

  I've currently got a pair of vSphere5 standard servers (physical, not VAs) managing about a hundred ESX 4.1 and 5 hosts in two different physical and logical datacenters. With our last purchase, we bought another vSphere license for the new vS server. I unmanaged all the ESX servers in one datacenter and added them to new vSphere server. Our previous single-vS-server layout used to be: -vSphere1 --Datacenter1 (where the physical ESX host was located) ---Folder ----ESX server1 --Datacenter2 ---Folder ----ESX server2 Now it looks like -vSphere1 --Datacenter1 ---Folder ----ESX server1 -vSphere2 (new vSphere server) --Datacenter2 ---Folder ----ESX server2 ESX server2 was removed from vSphere1's inventory and added to vSphere2's, so it is now managed by vSphere2. This is nice and all, as no vSphere <-- ESX management traffic leaves the physical datacenter, except for one huge oversight: when I go to clone a VM, the opposite vSphere server (and thus other datacenter) does not show up in the list on the first page of the wizard. Is this a bug, a license limitation, or is it just simply not possible to clone a VM from an ESX box managed by one vS server to another ESX box managed by a /different/ vS server?

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >