Search Results

Search found 4724 results on 189 pages for 's unit'.

Page 150/189 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• From Co-op to fulltime help with salary negotation [closed]

  - by Peter

  Hey I'm a coop student that worked at a particular medium size printing company for 8 months. I had a good time it was lax, sometimes insufficiently challenging but none the less I learned a whole lot. I stuck with them for another 5 months (including this month) at the same rate I was paid then, doing testing work, tool development, taking care of emergencies when the lead developers were away, and other smaller projects and now bigger projects and problem handling (bad printer output etc.). I know their website inside out (ecommerce), and I know their printing software inside out and have made many changes to them both without a hitch. I have also done a lot of refactoring of the existing code base which as far as Im concerned, I believe am the only one to do those sorts of restructuring even though there is constant talk about it. I guess the unit testing paid off and lets me see the value in modularity if even a tad more. Never the less I have faith in my skill and the restructuring I did turned out better than I had imagined . Now the problem is that I finish school next month and so I asked for a full time spot the month after. They have been expanding and have hired a new guy a few months after my coop spot, and just now they hired a new guy to deal with the CRM application. The lead developer who wrote all of the software had left 5 months ago so it was up to all of us to learn what he had done over 4 years (including db, networking). So now I'm afraid that if I assert myself for a salary similar to the other guys, which I believe I am certainly on par with, that I would be seen as ingrateful. It's hard to flip a switch and say, hey double my pay, although when I'm working with their bread and butter (printers) and writing new features, refactoring the whole application for extensibility. I love it regardless of pay. I also feel maybe I'm replaceeble, although nobody knows the website better than myself and the lead web dev (not by a long shot), and nobody knows the printer software/drivers better than myself. I just thought they would have brought up a raise earlier on, and now it feels like they don't value my work. I'm also tired of worrying about it. I think my question is, well what do I do next?

  Read the article

• Learning by doing (and programming by trial and error)

  - by AlexBottoni

  How do you learn a new platform/toolkit while producing working code and keeping your codebase clean? When I know what I can do with the underlying platform and toolkit, I usually do this: I create a new branch (with GIT, in my case) I write a few unit tests (with JUnit, for example) I write my code until it passes my tests So far, so good. The problem is that very often I do not know what I can do with the toolkit because it is brand new to me. I work as a consulant so I cannot have my preferred language/platform/toolkit. I have to cope with whatever the customer uses for the task at hand. Most often, I have to deal (often in a hurry) with a large toolkit that I know very little so I'm forced to "learn by doing" (actually, programming by "trial and error") and this makes me anxious. Please note that, at some point in the learning process, usually I already have: read one or more five-stars books followed one or more web tutorials (writing working code a line at a time) created a couple of small experimental projects with my IDE (IntelliJ IDEA, at the moment. I use Eclipse, Netbeans and others, as well.) Despite all my efforts, at this point usually I can just have a coarse understanding of the platform/toolkit I have to use. I cannot yet grasp each and every detail. This means that each and every new feature that involves some data preparation and some non-trivial algorithm is a pain to implement and requires a lot of trial-and-error. Unfortunately, working by trial-and-error is neither safe nor easy. Actually, this is the phase that makes me most anxious: experimenting with a new toolkit while producing working code and keeping my codebase clean. Usually, at this stage I cannot use the Eclipse Scrapbook because the code I have to write is already too large and complex for this small tool. In the same way, I cannot use any more an indipendent small project for my experiments because I need to try the new code in place. I can just write my code in place and rely on GIT for a safe bail-out. This makes me anxious because this kind of intertwined, half-ripe code can rapidly become incredibly hard to manage. How do you face this phase of the development process? How do you learn-by-doing without making a mess of your codebase? Any tips&tricks, best practice or something like that?

  Read the article

• Pixels - A cry for some insight

  - by CarrotFile

  I'm pretty new to web developing and I'd love some clarification. Although reading more than one book on the topic, I cannot seem to wrap my head around the pixel concept. I encounter problems with this issue when trying to use CSS and pixel units for design that fits different screen sizes. To my understanding a pixel is the most basic unit used by a monitor in order to compose an image on the screen. So if me resolution is 800 by 600, everything on my screen is rendered using those 800*600 basic building blocks. If I were to enlarge my screen resolution, 3 things would accrue: A. The basic image building block(the pixel) would shrink in size B. The pixels would move close together C. Well, more pixels would now be available All these combined lead to a sharper(depending on the viewing distance) and more detail enabling image. Well so far so good. Here is were I start getting lost: To my knowledge a pixel is not a physical, real object. Monitors are not embedded with a few thousand pixels. I am drawn to this conclusion because anyone can change his screen's resolution, making a pixel on his screen bigger or smaller, and adding or subtracting the amount of total pixels on screen. Adding to that, I have herd that different monitors have different pixel densities. For example Apple's retina monitors. Taking all of the above as my knowledge base, These are my questions: If a pixel has no real world constant size, what does comparing different pixel densities matter? Each screen company can define it's own pixel concept and declare the higher density. What does a bigger pixel density mean? Say we take two screens with the same physical dimensions, but with a different pixel density, am I to assert that the main difference would be the larger density screen being able to display a higher max resolution? Or am I to assert that given the same resolution on both monitors, the higher density one would display a sharper, smaller image? If a pixel is not a fixed size within one monitor, is it a fixed size between the same resolution on two different monitors? For example, would two different monitors, set to the same resolution, be comprised of same size, same quantity pixels? I'd love some help (:

  Read the article

• Keep coding the wrong way to remain consistent? [closed]

  - by bwalk2895

  Possible Duplicate: Code maintenance: keeping a bad pattern when extending new code for being consistent, or not? To keep things simple let's say I am responsible for maintaining two applications, AwesomeApp and BadApp (I am responsible for more and no that is not their actual names). AwesomeApp is a greenfield project I have been working on with other members on my team. It was coded using all the fancy buzzwords, Multilayer, SOA, SOLID, TDD, and so on. It represents the direction we want to go as a team. BadApp is a application that has been around for a long time. The architecture suffers from many sins, namely everything is tightly coupled together and it is not uncommon to get a circular dependency error from the compiler, it is almost impossible to unit test, large classes, duplicate code, and so on. We have a plan to rewrite the application following the standards established by AwesomeApp, but that won't happen for a while. I have to go into BadApp and fix a bug, but after spending months coding what I consider correctly, I really don't want do continue perpetuate bad coding practices. However, the way AwesomeApp is coded is vastly different from the way BadApp is coded. I fear implementing the "correct" way would cause confusion for other developers who have to maintain the application. Question: Is it better to keep coding the wrong way to remain consistent with the rest of the code in the application (knowing it will be replaced) or is it better to code the right way with an understanding it could cause confusion because it is so much different? To give you an example. There is a large class (1000+ lines) with several functions. One of the functions is to calculate a date based on an enumerated value. Currently the function handles all the various calculations. The function relies on no other functionality within the class. It is self contained. I want to break the function into smaller functions (at the very least) and put them into their own classes and hide those classes behind an interface (at the most) and use the factory pattern to instantiate the date classes. If I just broke it out into smaller functions within the class it would follow the existing coding standard. The extra steps are to start following some of the SOLID principles.

  Read the article

• Understanding exceptional cases

  - by Justin

  I've been studying the use of exceptions in various php projects (such as Doctrine and Zend Framework). Exceptions seem to be thrown when unordinary input/state occurs. A perfect example is Doctrine throwing an exception when you try to use a invalid query string. I think the creators of the doctrine api understood that first, you can't query data by using an invalid DQL statement, and a developer should immediately be warned that an error has occurred, rather then letting execution continue with the possibility of an error code going un-checked. I also bet that this simplifies reading the code. I can't think of a situation where you would want to use an invalid DQL statement, except unit testing. Since this is true, it's better to avoid plaguing a bunch of code with null/error checks and use exceptions. I've read in books that exceptions shouldn't be thrown when validating dating user input. I've seen examples where of where the guideline is broken. One example is the Zend framework. If supplying an invalid controller or action name, an exception is thrown. Unlike doctrine, the user has more direct control over this sort of input. I know you can configure an error controller and set up a 404 message or what have you, but I'm curious why they have used an exception in this scenario? I guess you can argue the Zend Framework does not know how to continue processing the quest. One last example Is I wrote a function to return some html based on a given resource type. This resource type is hard-coded and sent when a user interacts with a web site (such as clicking a button to display the form to input data). I don't expect users to be mucking around with the request type. Under normal operating conditions, the resource type should be valid. To clean up some logic, I was going to throw an exception if a particular form wasn't found. This is mainly to find the correct form associated with a resource type so proper validation can occur. Does this sound like a valid use case for an exception? Right now it's pretty trivial, but I do plan to implement a restful consumer and re-using a function to map resources to their validation services would be very useful. I can then catch the exception and based on the consumer, return an error message suitable for the request type...

  Read the article

• 13.10 upgrade dropping wifi [on hold]

  - by Daryl

  Almost a complete newb here. After my last upgrade from 12.04 to 13.10 my wifi now randomly drops. The only way I can get a signal back is a shutdown and restart otherwise it shows no network is even available to connect to. Had no problems until the upgrade. Any help would be appreciated. H/W path Device Class Description ==================================================== system h8-1534 (H2N64AA#ABA) /0 bus 2AC8 /0/0 memory 64KiB BIOS /0/4 processor AMD FX(tm)-6200 Six-Core Processor /0/4/5 memory 288KiB L1 cache /0/4/6 memory 6MiB L2 cache /0/4/7 memory 8MiB L3 cache /0/d memory 10GiB System Memory /0/d/0 memory DIMM Synchronous [empty] /0/d/1 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/2 memory 2GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/d/3 memory 4GiB DIMM DDR3 Synchronous 1600 MHz (0.6 ns) /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B) /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU) /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B) /0/100/2/0 display Turks PRO [Radeon HD 7570] /0/100/2/0.1 multimedia Turks/Whistler HDMI Audio [Radeon HD 6000 Series] /0/100/5 bridge RD890 PCI to PCI bridge (PCI express gpp port E) /0/100/5/0 bus TUSB73x0 SuperSpeed USB 3.0 xHCI Host Controller /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [RAID5 mode] /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/100/14 bus SBx00 SMBus Controller /0/100/14.2 multimedia SBx00 Azalia (Intel HDA) /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller /0/100/14.4 bridge SBx00 PCI to PCI Bridge /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) /0/100/15.1 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) /0/100/15.2 bridge SB900 PCI to PCI bridge (PCIE port 2) /0/100/15.2/0 wlan0 network RT3290 Wireless 802.11n 1T/1R PCIe /0/100/15.2/0.1 generic RT3290 Bluetooth /0/100/15.3 bridge SB900 PCI to PCI bridge (PCIE port 3) /0/100/15.3/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller /0/101 bridge Family 15h Processor Function 0 /0/102 bridge Family 15h Processor Function 1 /0/103 bridge Family 15h Processor Function 2 /0/104 bridge Family 15h Processor Function 3 /0/105 bridge Family 15h Processor Function 4 /0/106 bridge Family 15h Processor Function 5 /0/1 scsi0 storage /0/1/0.0.0 /dev/sda disk 1TB WDC WD1002FAEX-0 /0/1/0.0.0/1 volume 189MiB Windows FAT volume /0/1/0.0.0/2 /dev/sda2 volume 244MiB data partition /0/1/0.0.0/3 /dev/sda3 volume 931GiB LVM Physical Volume /0/2 scsi2 storage /0/2/0.0.0 /dev/cdrom disk DVD A DH16ACSHR /0/3 scsi6 storage /0/3/0.0.0 /dev/sdb disk SCSI Disk /0/3/0.0.1 /dev/sdc disk SCSI Disk /0/3/0.0.2 /dev/sdd disk SCSI Disk /0/3/0.0.3 /dev/sde disk MS/MS-Pro /0/3/0.0.3/0 /dev/sde disk /1 power Standard Efficiency I apologize for my newbness. I hope this is enough info for the hardware. Thanks Bruno for pointing out I needed to add more info. If I am lacking anything else please let me know and I'll post it.

  Read the article

• Code testing practice

  - by Robin Castlin

  So now I have come to the conclusion like many others that having some way of constantly testing your code is good practice since it enables fewer people to be involved (colleges and customers alike) by simply knowing what's wrong before someone else finds out the hard way. I've heard and read some about Unit Testing and understand what it's supposed to do and all. The there are so many different types of bugs. It can be everything from web browser not being able not being able to send correct values, javascript failing, a global function messing up a piece of code somewhere to a change that looked good when testing it out but fails in some special case which was hard to anticipate. My simply finding these errors I learn to rarely repeat them again, but there seems to always be new bugs to be found and learnt from. I would guess maybe the best practice would be to run every page and it's functions a couple of times, witness the result and repeat this in Firefox, Chrome and Internet Explorer (and all smartphones apparently) to make sure it works as intended. However this would take quite some time to do consider I don't work with patches/versions and do little fixes here and there a couple of times per week. What I prefer would be some kind of page I can just load that tests as much things as possible to make sure the site works as intended. Basicly just run a lot of cURL's with POST-values and see if I get expected result. But how would I preferably not increase the IDs of every mysql rows if I delete these testing rows? It feels silly to be on ID 1000 with maybe 50 rows in total. If I could build a new project from scratch I would probably implement some kind of smooth way to return a "TRUE" on testing instead of the actual page. But this solution would for the moment being have to be passed on existing projects. My question What would you recommend to be the best way to test my site to make sure that existing functions does their job upon editing the code? Should I consider to implement a lot of edits first, then test manually the entire code to make sure it still works? Is there any nice way of testing codes without "hurting" the ID columns? Extra thoughs Would it be a good idea to associate all of my files to the different parts of my site which they affect? For instance if I edit home.php I will through documentation test if my homepage's start works as intended since it's the only part of my site it should affect.

  Read the article

• Entity Framework 5, separating business logic from model - Repository?

  - by bnice7

  I am working on my first public-facing web application and I’m using MVC 4 for the presentation layer and EF 5 for the DAL. The database structure is locked, and there are moderate differences between how the user inputs data and how the database itself gets populated. I have done a ton of reading on the repository pattern (which I have never used) but most of my research is pushing me away from using it since it supposedly creates an unnecessary level of abstraction for the latest versions of EF since repositories and unit-of-work are already built-in. My initial approach is to simply create a separate set of classes for my business objects in the BLL that can act as an intermediary between my Controllers and the DAL. Here’s an example class: public class MyBuilding { public int Id { get; private set; } public string Name { get; set; } public string Notes { get; set; } private readonly Entities _context = new Entities(); // Is this thread safe? private static readonly int UserId = WebSecurity.GetCurrentUser().UserId; public IEnumerable<MyBuilding> GetList() { IEnumerable<MyBuilding> buildingList = from p in _context.BuildingInfo where p.Building.UserProfile.UserId == UserId select new MyBuilding {Id = p.BuildingId, Name = p.BuildingName, Notes = p.Building.Notes}; return buildingList; } public void Create() { var b = new Building {UserId = UserId, Notes = this.Notes}; _context.Building.Add(b); _context.SaveChanges(); // Set the building ID this.Id = b.BuildingId; // Seed 1-to-1 tables with reference the new building _context.BuildingInfo.Add(new BuildingInfo {Building = b}); _context.GeneralInfo.Add(new GeneralInfo {Building = b}); _context.LocationInfo.Add(new LocationInfo {Building = b}); _context.SaveChanges(); } public static MyBuilding Find(int id) { using (var context = new Entities()) // Is this OK to do in a static method? { var b = context.Building.FirstOrDefault(p => p.BuildingId == id && p.UserId == UserId); if (b == null) throw new Exception("Error: Building not found or user does not have access."); return new MyBuilding {Id = b.BuildingId, Name = b.BuildingInfo.BuildingName, Notes = b.Notes}; } } } My primary concern: Is the way I am instantiating my DbContext as a private property thread-safe, and is it safe to have a static method that instantiates a separate DbContext? Or am I approaching this all wrong? I am not opposed to learning up on the repository pattern if I am taking the total wrong approach here.

  Read the article

• What is a useful pattern to maintaining an object state in a one to many relationship?

  - by ahenderson

  I am looking for a design for my application, here are the players(classes) involved. struct Transform { // Uses a matrix to transform the position. // Also acts acts as the state of a Dialog. Position transform(Position p); //other methods. }; struct Dialog { // There are multiple dialog for the user to transform the output. Transform& t; void ChangeTranformation(){t.rotate(360);} } struct Algorithm { //gives us a position based on an implementation. For example this can return points on a circle or line. Transform& t; Position m_p; Dialog& d; Position GetCurrentPosition(){ return t.transform(m_p);} //other methods. } Properties I need: Each algorithms has one dialog and each dialog can have many algorithms associated with it. When the user selects an algorithm a dialog associated with that algorithm is displayed. If the user selects a different algorithm then re-selects back the state is restored in the dialog. Basically I want a good design pattern to maintain the state of the dialog given that many algorithms use it and they can be switched back and forth. Does anyone have any suggestions? Here is a use case: Dialog1 has a single edit box to control the radius. Algorithm1 generates points on a unit circle. Algorithm2 is the same as Algorithm1. The user has selected Algorithm1 and entered 2 into the edit box. This will generate points on a circle of radius 2. The user then selects Algorithm2 and enters 10 into the edit box of Dialog1. This will generate points on a circle of radius 10. Finally Algorithm1 is selected again. The edit box of Dialog1 should show 2 and points on a circle of radius 2 should be generated.

  Read the article

• Should i continue my self-taught coding practice or learn how to do coding professionally?

  - by G1i1ch

  Lately I've been getting professional work, hanging out with other programmers, and making friends in the industry. The only thing is I'm 100% self-taught. It's caused my style to extremely deviate from the style of those that are properly trained. It's the techniques and organization of my code that's different. It's a mixture of several things I do. I tend to blend several programming paradigms together. Like Functional and OO. I lean to the Functional side more than OO, but I see the use of OO when something would make more sense as an abstract entity. Like a game object. Next I also go the simple route when doing something. When in contrast, it seems like sometimes the code I see from professional programmers is complicated for the sake of it! I use lots of closures. And lastly, I'm not the best commenter. I find it easier just to read through my code than reading the comment. And most cases I just end up reading the code even if there are comments. Plus I've been told that, because of how simply I write my code, it's very easy to read it. I hear professionally trained programmers go on and on about things like unit tests. Something I've never used before so I haven't even the faintest idea of what they are or how they work. Lots and lots of underscores "_", which aren't really my taste. Most of the techniques I use are straight from me, or a few books I've read. Don't know anything about MVC, I've heard a lot about it though with things like backbone.js. I think it's a way to organize an application. It just confuses me though because by now I've made my own organizational structures. It's a bit of a pain. I can't use template applications at all when learning something new like with Ubuntu's Quickly. I have trouble understanding code that I can tell is from someone trained. Complete OO programming really leaves a bad taste in my mouth, yet that seems to be what EVERYONE else is strictly using. It's left me not that confident in the look of my code, or wondering whether I'll cause sparks when joining a company or maybe contributing to open source projects. In fact I'm rather scared of the fact that people will eventually be checking out my code. Is this just something normal any programmer goes through or should I really look to change up my techniques?

  Read the article

• Encapsulating code in F# (Part 1)

  - by MarkPearl

  I have been looking at F# for a while now and seem a few really interesting samples and snippets on howto’s. This has been great to see the basic outline of the language and the possibilities, however a nagging question in the back of my mind has been what does an F# project look like? How do I code group code in F# so that it can be modularized and brought in and out of a project easily? My Expert F# book has an entire chapter (7) dedicated to this and after browsing the other chapters of the book I decided that this topic was something I really wanted to know more about now! Because of my C# background I keep trying to think in F# of objects. So to try and get a clearer idea of how to do things the F# way I am first going to take a very simplified C# example and try to “translate” it. using System; namespace ConsoleApplication1 { namespace ExampleOfEncapsulationInCSharp { class Program { static void EncapsulatedVariableInAMethod() { int count = 10; Console.WriteLine(count); } static void Main(string[] args) { EncapsulatedVariableInAMethod(); Console.ReadLine(); } } } } From the above example the count integer is encapsulated within EncapsulatedVariableInAMethod method. You couldn’t access the count variable from outside the scope of its parent method but have full access to it within the method. Lets look at my F# equivalent… open System let EncapsulatedVariableInAMethod = let count = 10 Console.WriteLine(count) () EncapsulatedVariableInAMethod Console.ReadLine()   Now, when I first attempted to write the F# code I got stuck… I didn’t have the Console.WriteLine calls but had the following… open System let EncapsulatedVariableInAMethod = let count = 10 EncapsulatedVariableInAMethod Console.ReadLine()   The compiler didn’t like the let before the count = 10. This is because every F# expression must evaluate to a value. If I did not want to make the Console call, I would still need to evaluate the expression to something – and for this reason the Unit Type is provided. I could have done something like…. open System let EncapsulatedVariableInAMethod = let count = 10 () EncapsulatedVariableInAMethod Console.ReadLine()   Which the compiler would be happy with…

  Read the article

• Multi-threaded JOGL Problem

  - by moeabdol

  I'm writing a simple OpenGL application in Java that implements the Monte Carlo method for estimating the value of PI. The method is pretty easy. Simply, you draw a circle inside a unit square and then plot random points over the scene. Now, for each point that is inside the circle you increment the counter for in points. After determining for all the random points wither they are inside the circle or not you divide the number of in points over the total number of points you have plotted all multiplied by 4 to get an estimation of PI. It goes something like this PI = (inPoints / totalPoints) * 4. This is because mathematically the ratio of a circle's area to a square's area is PI/4, so when we multiply it by 4 we get PI. My problem doesn't lie in the algorithm itself; however, I'm having problems trying to plot the points as they are being generated instead of just plotting everything at once when the program finishes executing. I want to give the application a sense of real-time display where the user would see the points as they are being plotted. I'm a beginner at OpenGL and I'm pretty sure there is a multi-threading feature built into it. Non the less, I tried to manually create my own thread. Each worker thread plots one point at a time. Following is the psudo-code: /* this part of the code exists in display() method in MyCanvas.java which extends GLCanvas and implements GLEventListener */ // main loop for(int i = 0; i < number_of_points; i++){ RandomGenerator random = new RandomGenerator(); float x = random.nextFloat(); float y = random.nextFloat(); Thread pointThread = new Thread(new PointThread(x, y)); } gl.glFlush(); /* this part of the code exists in run() method in PointThread.java which implements Runnable */ void run(){ try{ gl.glPushMatrix(); gl.glBegin(GL2.GL_POINTS); if(pointIsIn) gl.glColor3f(1.0f, 0.0f, 0.0f); // red point else gl.glColor3f(0.0f, 0.0f, 1.0f); // blue point gl.glVertex3f(x, y, 0.0f); // coordinates gl.glEnd(); gl.glPopMatrix(); }catch(Exception e){ } } I'm not sure if my approach to solving this issue is correct. I hope you guys can help me out. Thanks.

  Read the article

• Advice on how to build html5 basic tile game (multi player, cross device)

  - by Eric

  I just read http://buildnewgames.com/real-time-multiplayer/ which explains the fundamentals and bets practices to build a massive real time multiplayer html5 game. My question is however given the “simplicity” of the game I need to build (simple kind of scratch game where you find or not something behind a tile), do I really need complex tools (canvas or node.js for example) ? The game The gamestakes place with a picture of our office as a background (tilemap). For HR purpose, we wish to create the following game fore employees: each day they can come to the website and click on a certain number of tiles (3 max per day) and find behind it motivation advice and interesting facts about the company. The constraints and rules the screen is divided into isometric 2D square tiles. There are basically an image (photograph of our office) number of tiles on the screen game: about 10,000 to much more (with scroll , see below) the players can scroll in 4 directions there are only 2 types of tiles: already open and closed player can open tiles that have not been yet open by other players there is no path for players : any player can click on any tile on the screen at any moment (if it’s not already done by another player) 2 players can’t be on the same tile at the same moment (or if they can, I’ll have to manage to see which one clicked on it first) only one type of player (all with similar roles), no weapon, no internal score… very simple game. no complex physics (collision only occurs if 2 players are on the same tile) The target I need to achieve: cross device, cross browsers high performance reaction (subsecond reactions) average nb of players per hour: up to 10K players per hour (quite high indeed but it’s because we aim at proving our case for the game to our business unit) So what I would like to know: 2D Tiled map: Do I need tiledmapeditor or can I enable me split the screen like here ? should I use canvas or plain html/css could be sufficient for my need? do I need a game engine/framework such as melon.js or crafty./js ? (even if the game play is extremely basic, I do need mouse and touché device support, mouse emulations on touch devices…) or ca I easily/quickly do it without? for my constraints and targets, should I use CPU acceleration ? for my constraints and targets, should I use web workers ? for the database, for a massively real time game should I avoid to put the current locations of player in MySQL as i feel it might slow me down. What kind of DB should I implement ? Thanks for your help !

  Read the article

• Physics Engine [Collision Response, 2-dimensional] experts, help!! My stack is unstable!

  - by Register Sole

  Previously, I struggle with the sequential impulse-based method I developed. Thanks to jedediah referring me to this paper, I managed to rebuild the codes and implement the simultaneous impulse based method with Projected-Gauss-Seidel (PGS) iterative solver as described by Erin Catto (mentioned in the reference of the paper as [Catt05]). So here's how it currently is: The simulation handles 2-dimensional rotating convex polygons. Detection is using separating-axis test, with a SKIN, meaning closest points between two polygons is detected and determined if their distance is less than SKIN. To resolve collision, simultaneous impulse-based method is used. It is solved using iterative solver (PGS-solver) as in Erin Catto's paper. Error-correction is implemented using Baumgarte's stabilization (you can refer to either paper for this) using J V = beta/dt*overlap, J is the Jacobian for the constraints, V the matrix containing the velocities of the bodies, beta an error-correction parameter that is better be < 1, dt the time-step taken by the engine, and overlap, the overlap between the bodies (true overlap, so SKIN is ignored). However, it is still less stable than I expected :s I tried to stack hexagons (or squares, doesn't really matter), and even with only 4 to 5 of them, they hardly stand still! Also note that I am not looking for a sleeping scheme. But I would settle if you have any explicit scheme to handle resting contacts. That said, I would be more than happy if you have a way of treating it generally (as continuous collision, instead of explicitly as a special state). Ideas I have: I would try adding a damping term (proportional to velocity) to the Baumgarte. Is this a good idea in general? If not I would not want to waste my time trying to tune the parameter hoping it magically works. Ideas I have tried: Using simultaneous position based error correction as described in the paper in section 5.3.2, turned out to be worse than the current scheme. If you want to know the parameters I used: Hexagons, side 50 (pixels) gravity 2400 (pixels/sec^2) time-step 1/60 (sec) beta 0.1 restitution 0 to 0.2 coeff. of friction 0.2 PGS iteration 10 initial separation 10 (pixels) mass 1 (unit is irrelevant for now, i modified velocity directly<-impulse method) inertia 1/1000 Thanks in advance! I really appreciate any help from you guys!! :)

  Read the article

• Finding "Stuff" In OUM

  - by Dave Burke

  One of the first questions people asked when they start using the Oracle Unified Method (OUM) is “how do I find X ?” Well of course no one is really looking for “X”!! but typically an OUM user might know the Task ID, or part of the Task Name, or maybe they just want to find out if there is any content within OUM that is related to a couple of keys words they have in their mind. Here are three quick tips I give people: 1. Open up one of the OUM Views, then click “Expand All”, and then use your Browser’s search function to locate a key Word. For example, Google Chrome or Internet Explorer: <CTRL> F, then type in a key Word, i.e. Architecture This is fast and easy option to use, but it only searches the current OUM page 2. Use the PDF view of OUM Open up one of the OUM Views, and then click the PDF View button located at the top of the View. Depending on your Browser’s settings, the PDF file will either open up in a new Window, or be saved to your local machine. In either case, once the PDF file is open, you can use the built in PDF search commands to search for key words across a large portion of the OUM Method Pack. This is great option for searching the entire Full Method View of OUM, including linked HTML pages, however the search will not included linked Documents, i.e. Word, Excel. 3. Use your operating systems file index to search for key words This is my favorite option, and one I use virtually every day. I happen to use Windows Search, but you could also use Google Desktop Search, of Finder on a MAC. All you need to do (on a Windows machine) is to make sure your local OUM folder structure is included in the Windows Index. Go to Control Panel, select Indexing Options, and ensure your OUM folder is included in the Index, i.e. C:/METHOD/OM40/OUM_5.6 Once your OUM folders are indexed, just open up Windows Search (or Google Desktop Search) and type in your key worlds, i.e. Unit Testing The reason I use this option the most is because the Search will take place across the entire content of the Indexed folders, included linked files. Happy searching!

  Read the article

• Programming tourism

  - by Andrew_B

  I'm going on vacation to Paris, France for 10 days. Actually, it's my girlfriend's wish to go there but I'm not very interested in visiting, sightseeing, etc. Recently, I came up with an idea of trying to do something like programming tourism. :) I'd like to do something related to programming in a startup-like company. I do not want a salary or any kind of compensation. I want to overview process, social aspects, environment and "what it feels like" to development software in another country. I'm from Russia. I've been a software developer since 2003. I prefer C#4 but I'm ready to use anything Turing-complete. I have some MS certifications and am familiar with all .NETs since 1.1. Currently I'm finishing PhD in CS. I'm interested in multidimensional indexing and I can turn any piece of data and code to OLAP system. :) But it'd take too much time. What can I do? I have no more than one week. I want a totally complete project in a short amount of time. Implement some features in well-tested project Do a code review Debug memory, performance and concurrency issues Do unit testing So, about the questions: Is it legal? I'm ready to sign NDA if it's necessary. I'll have tourist visa. Is it possible? I'm really sure that bureaucratic companies with lots of HRs and PMs will not allow such experiments. But small companies can afford it. I'm ready to guarantee support on my code after leaving home :) P.S. I still havn't started learning French :) I hope it will not take too much time :) P.P.S. Yes, it's girlfriend-approved. What's in it for me? It's fun. It's fun to see new systems and people who created them. It's fun to complete meaningful things. Quickly. What's in it for them? Feature, debug, review or test. If my short-term colleagues will like this style of working I can invite them to make same trip into my company :) I think in Russia it's even more exciting :)

  Read the article

• Agile team with no dedicated Tester members. Insane or efficient?

  - by MetaFight

  I'm a software developer. I've been thinking a lot about the efficiency of the Software Testers I've worked with so far in my career. In fact, I've been thinking a lot about the Software Testers role in general and have reached a potentially contentious conclusion: Non-developer Software Testers staff are less efficient at software testing than developers. Now, before everyone gets upset, hear me out. This isn't mere opinion: Software Testing and Software Development both require a lot of skills in common: Problem solving Thinking about corner cases Analytical skills The ability to define clear and concise step-by-step scenarios What developers have in addition to this is the ability to automate their tests. Yes, I know non-dev testers can automate their tests too, but that often then becomes a test maintenance issue. Because automating UI tests is essentially programming, non-dev members encounter all the same difficulties software developers encounter: Copy-pasta, lack of code reusibility/maintainability, etc. So, I was wondering. Why not replace all non-dev roles with developer roles? Developers have the skills required to perform Software Testing tasks, and they have the skills to automate tests and keep them maintainable. Would the following work: Hire a bunch of developers and split them into 2 roles: Software developers Software developers doing testing (some manual, mostly automated by writing integration tests, unit tests, etc) Software developers doing application support. (I've removed this as it is probably a separate question altogether) And, in our case since we're doing Agile development, rotate the roles every sprint or two. Also, if at all possible, try to have people spend their Developer stints and Testing stints on different projects. Ideally you would want to reduce the turnover rate per rotation. So maybe you could have 2 groups and make sure the rotation cycles of the groups are elided. So, for example, if each rotation was two sprints long, the two groups would have their rotations 1 sprint apart. That way there's only a 50% turn-over rate per sprint. Am I crazy, or could this work? (Obviously a key component to this working is that all devs want to be in the 3 roles. Let's assume I'm starting a new company and I can hire these ideal people) Edit I've removed the phrase "QA", as apparently we are using it incorrectly where I work.

  Read the article

• How are software projects 'typically' managed/deployed

  - by rguilbault

  My company is evaluating adopting off-the-shelf ALM products to aid in our development lifecycle; we currently use our own homegrown solutions to manage requirements gathering, specification documentation, testing, etc. One of the issues I am having is that we have what we call a pipeline, which consists of particular stops: [Source] - [QC] - [Production] At the first stop, the developer works out a solution to some requested change and performs individual testing. When that process is complete (and peer review has been performed), our ALM system physically moves the affected programs from the [Source] runtime environment to the [QC] runtime environment. You can think of this as analogous to moving some web pages from the 'test' server to the 'live' server, where QC personnel can bang on the system and complain that the developer has it all wrong ;-) Once QC signs off that the changes are working, the system again moves the code along to the next stage, where additional testing is performed, etc. I have been searching the internet for a few days trying to find how the process is accomplished anywhere else -- I have read a bit about builds, automated testing, various ALM products, etc. but nowhere does any of this state how builds interact with initial change requests, what the triggers are, how dependencies are managed, how the various forms of testing are accommodated (e.g. unit testing, integration testing, regression testing), etc. Can anyone point me to any resources or attempt to explain (generically) how a change could/should be tracked and moved though the development lifecycle? I'd be very appreciative. To keep things consistent, let's say that we have a project called Calculator, which we want to add support for the basic trigonometric functions: sine, cosine and tangent. I'm open to reorganizing the company however we need to in order to accomplish due diligence testing and we can suppose that any tools are available for use (if that helps to illustrate the process). To start things off, I think I understand this much: we document the requirements, e.g.: support sine, cosine and tangent functions we create some type of change request/work order to assign to programming coding takes place, commits are made to version control peer review commences programmer marks the work order as completed? ... now what? How does QC do their thing? Would they perform testing before closing the 'work order'?

  Read the article

• Strangling the life out of Software Testing

  - by MarkPearl

  I recently did a course at the local university on Software Engineering. At the beginning of the course I looked over the outline of the subject and there seemed to be some really good content. It covered traditional & agile project methodologies, some general communication and modelling chapters and finished off with testing. I was particularly excited to see the section on testing as this was something I learnt on my own and see great value in. The course has now just ended and I am very disappointed. I now know one of the reasons why so few people i.e. in my region do Test Driven Development, or perform even basic testing methodologies. The topic was to academic! Yes, you might be able to list 4 different types of black box test approaches vs. white box test approaches and describe the characteristics of Smoke Tests, but never during course did we see an example of an actual test or how it might be implemented! In fact, if I did not have personal experience of applying testing in actual projects, I wouldn’t even know what a unit test looked like. Now, what worries me is the following… It took us 6 months to cover the course material, other students more than likely came out of that course with little appreciation of the subject – in fact they now have a very complex view of what a test is – so complex that I think most of them will never attempt it again on their own. Secondly, imagine studying to be a dentist without ever actually seeing a tooth? Yes, you might be able to describe a tooth, and know what it is made out of – but nobody would want a dentist who has never seen a tooth to operate on them. Yet somehow we expect people studying software engineering to do the same? This is not right. Now, before I finish my rant let me say that I know this is not the same everywhere in the world, and that there needs to be a balance on practical implementation and academic understanding – I am just disappointed that this does not seem to be happening at the institution that I am currently studying at ;-( Please, if you happen to be a lecturer or teacher reading this post – a combination of theory and practical's goes a long way. We need to up the quality of software being produced and that starts at learner level!

  Read the article

• PMDB Block Size Choice

  - by Brian Diehl

  Choosing a block size for the P6 PMDB database is not a difficult task. In fact, taking the default of 8k is going to be just fine. Block size is one of those things that is always hotly debated. Everyone has their personal preference and can sight plenty of good reasons for their choice. To add to the confusion, Oracle supports multiple block sizes withing the same instance. So how to decide and what is the justification? Like most OLTP systems, Oracle Primavera P6 has a wide variety of data. A typical table's average row size may be less than 50 bytes or upwards of 500 bytes. There are also several tables with BLOB types but the LOB data tends not to be very large. It is likely that no single block size would be perfect for every table. So how to choose? My preference is for the 8k (8192 bytes) block size. It is a good compromise that is not too small for the wider rows, yet not to big for the thin rows. It is also important to remember that database blocks are the smallest unit of change and caching. I prefer to have more, individual "working units" in my database. For an instance with 4gb of buffer cache, an 8k block will provide 524,288 blocks of cache. The following SQL*Plus script returns the average, median, min, and max rows per block. column "AVG(CNT)" format 999.99 set verify off select avg(cnt), median(cnt), min(cnt), max(cnt), count(*) from ( select dbms_rowid.ROWID_RELATIVE_FNO(rowid) , dbms_rowid.ROWID_BLOCK_NUMBER(rowid) , count(*) cnt from &tab group by dbms_rowid.ROWID_RELATIVE_FNO(rowid) , dbms_rowid.ROWID_BLOCK_NUMBER(rowid) ) Running this for the TASK table, I get this result on a database with an 8k block size. Each activity, on average, has about 19 rows per block. Enter value for tab: task AVG(CNT) MEDIAN(CNT) MIN(CNT) MAX(CNT) COUNT(*) -------- ----------- ---------- ---------- ---------- 18.72 19 3 28 415917 I recommend an 8k block size for the P6 transactional database. All of our internal performance and scalability test are done with this block size. This does not mean that other block sizes will not work. Instead, like many other parameters, this is the safest choice.

  Read the article

• Port forwarding on Fortigate 50B

  - by sindre j

  I have serious problems setting up port forwarding on a Fortigate 50B. The unit is basically running as factory default, the wan1 interface is connected to my fibre optic internet modem, and my lan is connected to the internal switch of the Fortigate. The factory default firewall policy allowing traffic from the internal interface to wan1 is kept and I'm able to access the interet as normal. Then I added a virtual ip and a firewall policy for allowing access from the internet to my local servers (ip 192.168.9.51) webserver (standard port 80). The settings I made are as follows. Edit Virtual IP Mapping Name : Server VIP External interface : wan1 Type : Static NAT Extermal IP Address/Range : 0.0.0.0 Mapped IP Address/Range : 192.168.9.51 Port Forwading : not checked Firewall policy Source interface/Zone : wan1 Source address : all Destination interface/Zone : internal Destination address : Server VIP Schedule : always Service : HTTP Action : ACCEPT no other settings checked What happens now is that I'm unable to access internet from my server, I'm not getting through to the webserver from internet either. I'm able to ping a site on the outside, but all web traffic is blocked, both ways. I've checked the documentation, but as far as I can tell I have set this up correctly. Anyone here with knowledge of Fortigate port forwading/NAT?

  Read the article

• Smart Array P400 - Accelerator Replacement Battery Failure

  - by inflammable

  TL;DR - Is the immediate failure of a replacement battery, for a failed battery, on a battery backed accelerator for a Smart Array P400 controller a common occurrence? Or are we likely to have an storage controller with an impending and critical fault? We have a slightly confusing situation with a Smart Array P400 storage controller with the 512mb battery backed accelerator addon on an HP DL380 server. The storage controller is (afaik) running the latest firmware and driver: Model: Smart Array P400 Controller Status: OK Firmware Version: 7.24 Serial Number: *snip* Rebuild Priority: Medium Expand Priority: Medium Number Of Ports: 2 The storage diagnostic (both on the both boot-up screen for the controller and within the 'Management Homepage' and the 'HP Array Diagnostic Utility') recently starting showing the following status a fault for the battery for the accelerator: Accelerator Status: Temporarily Disabled Error Code: Cache Disabled Low Batteries Serial Number: *snip* Total Memory: 524288 KB Read Cache: 25% Write Cache: 75% Battery Status: Failed Read Errors: 0 Write Errors: 0 We replaced the battery with a new unit (a visual inspection of the P400 card showing nothing unusual) and saw the same fault - but expected this to disappear over the course of a few hours/days as it charged. This didn't happy, and the fault status remains the same as above. Given the battery is a genuine part from HP, I wouldn't have expected a replacement battery to fail straight away, or to be dead-on-arrival (is that naivety on my part?). Is the immediate failure of a replacement battery, for a failed battery, on a battery backed accelerator a common occurrence? Or are we likely to have an storage controller with an impending and critical fault? Is there any diagnostic that could tell me more about the failed battery, without cracking the server open again? Many thanks!

  Read the article

• Cisco AnyConnect on IOS 12.4(20)T

  - by natacado

  There are plenty of tutorials on setting up AnyConnect on an ASA unit, and a handful of links noting that IOS 12.4(15) and later support AnyConnect, but I can't seem to find any good documentation about how to setup AnyConnect on IOS; most tutorials assume you only want a clientless VPN on IOS. the best I've found is this document on Cisco's site, but it's not working for me in practice - see below. This is all on a Cisco 881W: router#show version | include Version Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 12.4(20)T1, RELEASE SOFTWARE (fc3) ROM: System Bootstrap, Version 12.4(15r)XZ2, RELEASE SOFTWARE (fc1) The old SSL VPN Client seems to install just fine: router#show webvpn install status svc SSLVPN Package SSL-VPN-Client version installed: CISCO STC win2k+ 1.0.0 1,1,4,176 Thu 08/16/2007 12:37:00.43 However, when I install the AnyConnect client, after authenticating it hangs for a while during the self-update process, and stops with an error that the "AnyConnect package unavailable or corrupted." When I try to install the AnyConnect package on the router, I'm told that it's an invalid archive: router(config)#webvpn install svc flash:/webvpn/anyconnect-win-2.3.2016-k9.pkg SSLVPN Package SSL-VPN-Client (seq:2): installed Error: Invalid Archive Does anyone have a good sample on how to get the 2.x AnyConnect clients working with a Cisco device running IOS?

  Read the article

• Linux e1000e (Intel networking driver) problems galore, where do I start?

  - by Evan Carroll

  I'm currently having a major problem with e1000e (not working at all) in Ubuntu Maverick (1.0.2-k4), after resume I'm getting a lot of stuff in dmesg: [ 9085.820197] e1000e 0000:02:00.0: PCI INT A disabled [ 9089.907756] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k4 [ 9089.907762] e1000e: Copyright (c) 1999 - 2009 Intel Corporation. [ 9089.907797] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9089.907827] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9089.907857] e1000e 0000:02:00.0: setting latency timer to 64 [ 9089.908529] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9089.908922] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9089.908954] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9090.024625] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9090.024630] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9090.024712] e1000e 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005302-003 [ 9090.109492] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9090.164219] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X and, a bunch of [ 2128.005447] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 2128.005452] TDH <89> [ 2128.005454] TDT <27> [ 2128.005456] next_to_use <27> [ 2128.005458] next_to_clean <88> [ 2128.005460] buffer_info[next_to_clean]: [ 2128.005463] time_stamp <6e608> [ 2128.005465] next_to_watch <8a> [ 2128.005467] jiffies <6f929> [ 2128.005469] next_to_watch.status <0> [ 2128.005471] MAC Status <80080703> [ 2128.005473] PHY Status <796d> [ 2128.005475] PHY 1000BASE-T Status <4000> [ 2128.005477] PHY Extended Status <3000> [ 2128.005480] PCI Status <10> I decided to compile the latest stable e1000e to 1.2.17, now I'm getting: [ 9895.678050] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.17-NAPI [ 9895.678055] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9895.678098] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9895.678129] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9895.678162] e1000e 0000:02:00.0: setting latency timer to 64 [ 9895.679136] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.679160] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9895.679192] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9895.791758] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9895.791766] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9895.791850] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9895.892464] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.948175] e1000e 0000:02:00.0: irq 44 for MSI/MSI-X [ 9895.949111] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9895.954694] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9895.954703] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9895.955157] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9906.832056] eth0: no IPv6 routers present With 1.2.20 I get: [ 9711.525465] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-NAPI [ 9711.525472] e1000e: Copyright(c) 1999 - 2010 Intel Corporation. [ 9711.525521] e1000e 0000:02:00.0: Disabling ASPM L1 [ 9711.525554] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9711.525586] e1000e 0000:02:00.0: setting latency timer to 64 [ 9711.526460] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9711.526487] e1000e 0000:02:00.0: Disabling ASPM L0s [ 9711.526523] e1000e 0000:02:00.0: (unregistered net_device): PHY reset is blocked due to SOL/IDER session. [ 9711.639763] e1000e 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:0a:e4:3e:ce:74 [ 9711.639771] e1000e 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 9711.639854] e1000e 0000:02:00.0: eth0: MAC: 3, PHY: 2, PBA No: 005302-003 [ 9712.060770] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.116195] e1000e 0000:02:00.0: irq 45 for MSI/MSI-X [ 9712.117098] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9712.122684] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 9712.122693] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO [ 9712.123142] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9722.920014] eth0: no IPv6 routers present But, I'm still getting these [ 9982.992851] PCI Status <10> [ 9984.993602] e1000e 0000:02:00.0: eth0: Detected Hardware Unit Hang: [ 9984.993606] TDH <5d> [ 9984.993608] TDT <6b> [ 9984.993611] next_to_use <6b> [ 9984.993613] next_to_clean <5b> [ 9984.993615] buffer_info[next_to_clean]: [ 9984.993617] time_stamp <24da80> [ 9984.993619] next_to_watch <5d> [ 9984.993621] jiffies <24f200> [ 9984.993624] next_to_watch.status <0> [ 9984.993626] MAC Status <80080703> [ 9984.993628] PHY Status <796d> [ 9984.993630] PHY 1000BASE-T Status <4000> [ 9984.993632] PHY Extended Status <3000> [ 9984.993635] PCI Status <10> [ 9986.001047] e1000e 0000:02:00.0: eth0: Reset adapter [ 9986.176202] e1000e: eth0 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX [ 9986.176211] e1000e 0000:02:00.0: eth0: 10/100 speed: disabling TSO I'm not sure where to start troubleshooting this. Any ideas? Here is the result of ethtool -d eth0 MAC Registers ------------- 0x00000: CTRL (Device control register) 0x18100248 Endian mode (buffers): little Link reset: reset Set link up: 1 Invert Loss-Of-Signal: no Receive flow control: enabled Transmit flow control: enabled VLAN mode: disabled Auto speed detect: disabled Speed select: 1000Mb/s Force speed: no Force duplex: no 0x00008: STATUS (Device status register) 0x80080703 Duplex: full Link up: link config TBI mode: disabled Link speed: 10Mb/s Bus type: PCI Express Port number: 0 0x00100: RCTL (Receive control register) 0x04048002 Receiver: enabled Store bad packets: disabled Unicast promiscuous: disabled Multicast promiscuous: disabled Long packet: disabled Descriptor minimum threshold size: 1/2 Broadcast accept mode: accept VLAN filter: enabled Canonical form indicator: disabled Discard pause frames: filtered Pass MAC control frames: don't pass Receive buffer size: 2048 0x02808: RDLEN (Receive desc length) 0x00001000 0x02810: RDH (Receive desc head) 0x00000001 0x02818: RDT (Receive desc tail) 0x000000F0 0x02820: RDTR (Receive delay timer) 0x00000000 0x00400: TCTL (Transmit ctrl register) 0x3103F0FA Transmitter: enabled Pad short packets: enabled Software XOFF Transmission: disabled Re-transmit on late collision: enabled 0x03808: TDLEN (Transmit desc length) 0x00001000 0x03810: TDH (Transmit desc head) 0x00000000 0x03818: TDT (Transmit desc tail) 0x00000000 0x03820: TIDV (Transmit delay timer) 0x00000008 PHY type: IGP2 and ethtool -c eth0 Coalesce parameters for eth0: Adaptive RX: off TX: off stats-block-usecs: 0 sample-interval: 0 pkt-rate-low: 0 pkt-rate-high: 0 rx-usecs: 3 rx-frames: 0 rx-usecs-irq: 0 rx-frames-irq: 0 tx-usecs: 0 tx-frames: 0 tx-usecs-irq: 0 tx-frames-irq: 0 rx-usecs-low: 0 rx-frame-low: 0 tx-usecs-low: 0 tx-frame-low: 0 rx-usecs-high: 0 rx-frame-high: 0 tx-usecs-high: 0 tx-frame-high: 0 Here is also the lspci -vvv for this controller 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Lenovo ThinkPad X60s Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at 2000 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Address: 00000000fee0300c Data: 415a Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140 v1] Device Serial Number 00-0a-e4-ff-ff-3e-ce-74 Kernel driver in use: e1000e Kernel modules: e1000e I filed a bug on this upstream, still no idea how to get more useful information. Here is a the result of the running that script EEPROM FIX UPDATE $ sudo bash fixeep-82573-dspd.sh eth0 eth0: is a "82573L Gigabit Ethernet Controller" This fixup is applicable to your hardware Your eeprom is up to date, no changes were made Do I still need to do anything? Also here is my EEPROM dump $ sudo ethtool -e eth0 Offset Values ------ ------ 0x0000 00 0a e4 3e ce 74 30 0b b2 ff 51 00 ff ff ff ff 0x0010 53 00 03 02 6b 02 7e 20 aa 17 9a 10 86 80 df 80 0x0020 00 00 00 20 54 7e 00 00 14 00 da 00 04 00 00 27 0x0030 c9 6c 50 31 3e 07 0b 04 8b 29 00 00 00 f0 02 0f 0x0040 08 10 00 00 04 0f ff 7f 01 4d ff ff ff ff ff ff 0x0050 14 00 1d 00 14 00 1d 00 af aa 1e 00 00 00 1d 00 0x0060 00 01 00 40 1f 12 07 40 ff ff ff ff ff ff ff ff 0x0070 ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4a e0 I'd also like to note that I used eth0 every day for years and until recently never had an issue.

  Read the article

• Problem with switch dell 6224

  - by Matias

  Hello, we just have upgraded the firmware of a dell 6224 power connect switch and it won't reload. These are the symptons: - I power up the switch having the serial cable connected to it and the switch outputs nothing. The configuration of the serial console is fine: 9600 bds, etc... In fact, before the upgrade, I was connected to the switch through the very same cable. - Reseting the switch with its reset pinhole does not reset the switch: the power and fan lights powers off while I keep pressed the pinhole, but the switch itself does not resets. - When I connect an UTP cable to one of the switches port, the green lights don't flash, but ''mii-tool eth0'' in my laptop shows there is link!! The only thing I see in the output, different from other upgrades I've done, is this line at the end: Erasing Boot Flash.....^^^^Done. Any help or idea will be more than welcome!! Thanks!! console#show version Image Descriptions image1 : image2 : Images currently available on Flash -------------------------------------------------------------------- unit image1 image2 current-active next-active 1 <none> 3.0.0.8 image2 image2 console#boot system image2 Activating image image2 .. console#update bootcode Update bootcode and reset (Y/N)? Updating boot code ... Extracting boot code from image... Erasing Boot Flash.....^^^^Done.

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >