Search Results

Search found 7061 results on 283 pages for 'target'.

Page 150/283 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• memcached install issues with lib event on server

  - by albert N

  I've installed libevent on my server in the directory root/data/ and have i'm about to install memcached with ./configure –with-lib-event=/data/; make; make install However, after running a bit I get this error saying i'm pointing to the wrong directory for libevent. checking for libevent directory... configure: error: libevent is required. You can get it from http://www.monkey.org/~provos/libevent/ If it's already installed, specify its path using --with-libevent=/dir/ make: *** No targets specified and no makefile found. Stop. make: *** No rule to make target `install'. Stop. Any suggestions. I am not experience with cli so anything is help. Thanks!

  Read the article

• Outlook Anywhere remote https connection issue

  - by holian

  We have SBS 2003, and we use DYNDNS. We forward dyndns address 443 to local server ip 443 port. mycompany.dyndns.org:443 -- server.mycompany.local:443 In android phone i can check my mails with Outlook Active Snyc. From remote machine i can check my mails in owa (https://mycompany.dyndns.org/exchange) But i can't set up outlook 2013 to remote connect. I installed server.mycompany.local to remote machine trusted cert container, but i got error message: "There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site. Outlook is unable to connect to the proxy server. (Error Code 10)" Is it possible to connect exchange, via dnydns? Whats the problem? Thank you

  Read the article

• Securing a persistent reverse SSH connection for management

  - by bVector

  I am deploying demo Ubuntu 10.04 LTS servers in environments I do not control and would like to have an easy and secure way to administer these machines without having to have the destination firewall forward port 22 for SSH access. I've found a few guides to do this with reverse port (e.g. howtoforge reverse ssh tunneling guide) but I'm concerned with security of the stored ssh credentials required for the tunnel to be opened automatically. If the machine is compromised (primary concern is physical access to the machine is out of my control) how can I stop someone from using the stored credentials to poke around in the reverse ssh tunnel target machine? Is it possible to secure this setup, or would you suggest an alternate method?

  Read the article

• Windows 7 - Remote Desktop - multiple credentials

  - by w-

  Hi, My home network consists of a couple XP machines and a windows 7 box. One of the XP boxes is like a shared server accessed via Remote Desktop. I have an account on there and my gf has another. Previously I was able to save RDC shortcuts to this shared server including credentials. So in order to access the server from a computer on the network, i just needed to open the shortcut. I thus would have two shortcuts, one for my account and one for my gf's. In windows 7, it seems to store credentials for a box based on machine name. i.e. i can only store one set of credentials per machine name. This seems incredibly stupid so my question is: In windows 7, is there some way to have RDC shortcuts that use different credentials to login to the same target box? thanks

  Read the article

• Cisco ASA - NAT'ing VPN traffic

  - by DrStalker

  I have an IPsec VPN setup like this: [Remote users]-[Remote ASA] <-VPN-> [My ASA]-[Subnet A]-[Router 2]-[Subnet B] The VPN is set to handle traffic between [remote users] and [Subnet A]; it does not include [Subnet B]. Pretend the firewall rules for all routers are to permit everything. Now I want to redirect traffic that comes over the VPN to a specific IP on [subnet A] (192.168.1.102) to an IP on [Subnet B] (10.1.1.133) If I add a rule on [My ASA] to NAT traffic to original IP 192.168.1.102 to new IP 10.1.1.133, 1) Will this affect the connections coming in over the VPN? (ie: the VPN packets are unencrypted and then NAT is applied) 2) Will this work when the post-NAT target is on Subnet-B, which is not part of the VPN traffic selection?

  Read the article

• end_request: I/O error, dev sda, sector xxxxxxxxx

  - by muruga

  I have a IBM server. This server contains 3 hard disk with RAID 5. It was working fine earlier. Unfortunately this machine got the following error message. After that I have rebooted the systems. After that I am getting the following error message in kern.log and demsg kernel: [65896.678870] end_request: I/O error, dev sda, sector 17430271 kernel: [69263.783957] sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK : [69263.783957] sd 0:0:0:0: [sda] Sense Key : Hardware Error [current] kernel: [69263.783957] sd 0:0:0:0: [sda] Add. Sense: Internal target failure Whether it is kernel problem or hard disk problem or Raid problem

  Read the article

• Script errors when run by launchd at startup, but not when run in Terminal

  - by Mechcozmo

  I'm attempting to create a RAM disk that loads the previous contents when the system starts up, and every six hours writes the contents to a disk image. Currently, when you run the script from the terminal ("sudo bash LogToRAM.sh") everything works fine. But when run from launchd during startup, it doesn't work. Here's the lines from the log; the first line just gives some idea as to where in the boot process we are: SecurityAgent[202] Showing Login Window com.mechcozmo.LogToRAM[51] + /Developer/usr/bin/SetFile -a V /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] ERROR: File Not Found. (-43) on file: /Volumes/LogfileRAMdisk com.mechcozmo.LogToRAM[51] + /usr/sbin/asr -source '/Library/Application Support/LogToRAM/RAMdisk_store.dmg' -target /Volumes/LogfileRAMdisk/ -noverify Here is the script and plist file in question. Note that 'set -vx' is up at the top of the script; it give a lot of information about what is happening in the script. My current theory is that the /Volumes directory does not exist at this stage of the boot process, but that seems unlikely to be honest.

  Read the article

• Knife leaves stray processes on my system

  - by Leons

  I'm seeing stray knife processes on my system. I have an automated ruby script that runs bundle exec knife bootstrap against various nodes. Most of the time the knife process completes and goes away, but sometimes it stays for days. I'm noticing it days later in ps aux I think it's related to the target node being down when knife runs. The chef server timeout is high, so the action completes eventually when the node goes back up, but I think knife may give up or hang somehow during the wait. Is there something I can do about the stray knife processes? Does knife have timeout settings separate from the chef server's timeout settings?

  Read the article

• Feedback on available mid-to-enterprise level desktop backup solutions [closed]

  - by user85610

  I am involved in the creation of a new backup solution to replace our current Retrospect setup, which has become a significant time sink to administer. We have almost 200 desktop and some laptop clients, both Windows and OS X. We're only interested in products oriented around disk-to-disk, and would be integrate well with our current set of nine NAS devices as target storage. I'd just like some feedback from anyone out there, as it's sometimes difficult otherwise to find objective reviews of software at this level. Both data and time are important enough that we need a reliable solution which won't be prone to self-destruction as often as Retrospect. Bonus points for de-duplication, which might help squeeze more service time out of our NAS setup in terms of capacity. Currently considering Commvault and Netbackup. Many other products I've seen don't have an OSX client. Any thoughts?

  Read the article

• `rsync` NEVER uses its 'famous' delta-transfer!

  - by o_O Tync

  I have a big iso image which is currently being downloaded by a torrent client with space-reservation turned on: that means, file size is not changing while some chunks in in (4 Mib) are constantly changing because of a download. At 90% download I do the initial rsync to save time later: $ rsync -Ph DVD.iso /some/target/ sending incremental file list DVD.iso 2.60G 100% 40.23MB/s 0:01:01 (xfer#1, to-check=0/1) sent 2.60G bytes received 73 bytes 34.59M bytes/sec total size is 2.60G speedup is 1.00 Then, when the file's fully downloaded, I rsync again: total size is 2.60G speedup is 1.00 Speedup=1 says delta-transfer was not used, although 90% of the file has not changed. Why?!

  Read the article

• Application that recoginzes default gestures and tells me about results

  - by Andreas

  I need to check what gestures are available for certain touch pads, and also find out what kind of information is available. Is there some kind of application that simply recognizes gestures and prints out all relevant parameters for my test? I am mainly interested in multi-finger gestures, with 2-3 fingers, but also, whether distinctino about where a gesture was done (e. g. right border, left border) would be very helpful. Target is going to be Windows 7 and 8 64 bit.

  Read the article

• How can I add config options for a specific hostname outside <VirtualHost>?

  - by Boldewyn

  I'm using Apache 2.2 and let it serve domains foo.example.com and bar.example.com with <VirtualHost> statements: <VirtualHost 127.0.0.1:80> ServerName foo.example.com </VirtualHost> <VirtualHost 127.0.0.1:80> ServerName bar.example.com </VirtualHost> My problem is, that I need to add configuration options, that are only targeted at foo.example.com, in a separate file (let's say, /etc/apache/sites-enabled/foo.conf). This file will be included, before the VirtualHost statement is issued, but it can't be embedded inside it. Can I (and if yes, how) target configuration settings to foo.example.com requests only, outside the VirtualHost container?

  Read the article

• Can I get redundancy with a JBOD storage subsystem

  - by Dat Chu

  I have a Promise Technology J610S. This is a JBOD subsystem. Is it possible for me to buy a SAS hardware RAID controller and provide some type of redundancy for these drives? I am unsure whether I will use Linux or Windows yet so an answer with enumeration for both would be highly appreciated. One solution that I thought of was: if my J610s can export each drive as a target, my server will simply see 16 drives. The RAID controller can then perform the RAID5/RAID6 if I want.

  Read the article

• configure vpn so that it is not the preferred route

  - by pstanton

  Hi all, I recently re-installed XP on my PC. I had a vpn set up on the old system and remember being advised to change one setting so that it wasn't the preferred route for all network traffic. This was ideal as only connections to the target network would be made through the vpn and all normal traffic would go through the regular path unmolested. i remember thinking "why isn't this the default setting!?". now i've formatted my drive and lost the config for that vpn (besides host, username, passwd). does anyone know of the setting i'm referring to? thanks, paul.

  Read the article

• Are there any command line utilities which can calculate and/or limit how fast a pipe is running?

  - by stsquad

  I'm doing some basic stress testing of a Linux kernel network IWF with netcat. The set-up is fairly simple. On the target side: nc -l -p 10000 > /dev/null And on my desktop I was running: cat /dev/urandom | nc 192.168.0.20 10000 I'm using urandom for some poor-mans fuzz testing. However I find that even at this rate I can break something quite quickly. EDIT So I've been playing with trickle to rate limit how fast I'm generating data: cat /dev/urandom | trickle -u 10 nc 192.168.0.20 10000 But it's hard to tell if this is working. What would be really useful is a the pv equivilent of trickle that can work with pipes.

  Read the article

• linux + automated rsync command

  - by Diana

  my target is to copy /tmp/my_file from 10.10.10.1 to my Linux machine without login and password , I set the passwords file with the right password - secret123 so rsync should work , please advice why I get Permission denied. Remark - 10.10.10.1 address is linux machine version – red hat 5.3 rsync -WavH --password-file=/tmp/passwords --progress [email protected]:/tmp/my_file . Permission denied. rsync: connection unexpectedly closed (0 bytes read so far) rsync error: error in rsync protocol data stream (code 12) at io.c(165) more /tmp/passwords secret123 ls -ltr passwords -rwxr-xr-x 1 root root 10 Sep 12 17:32 passwords

  Read the article

• Tool for creating system image from DOS (should be USB bootable) ..?

  - by Ahmad

  I want to know if there's any decent tool which can be used to create the system image from DOS .. What I specifically want to do is to put the program in my FAT32 formatted USB, then boot the target computer from the USB so that the tool runs, and then it should be able to create a complete system image of the entire system, and store it on the USB itself .. Please note that I can ONLY do this from boot time because of other limitations .. I cannot go into any OS to do it from there .. So I need tools which can do this at boot time from DOS ..

  Read the article

• How do I get the Windows 7 installer onto a USB drive?

  - by Rod

  I'm having trouble installing Windows 7 onto my old laptop. The problem appears to be the laptop's DVD-ROM no longer seems to work. Sucks. So, I'm trying to figure out how to get a bootable USB with my Windows 7 DVD info onto it. I found this link here on superuser.com: http://superuser.com/questions/66948/place-a-bootable-iso-on-a-usb-drive That looks good, except for the detail about making the USB bootable. It said that the OS you're making it bootable on must be the same as the machine you're going to be installing it on. I can't do that. The machine I would make it bootable from is a 64-bit version of Windows 7. The target machine is 32-bit. So, how's this going to work?

  Read the article

• How to disable color dithering for low-bit-depth screen settings?

  - by gogowitsch

  I am using Terminal Services and TeamViewer a lot to access other computers, partly over slow networks. The problem described below is not affected by which of the two remote access services I am using. When accessing Windows 7 Professional machines, a great deal of text is hard to read as the background is dithered. Even for exactly the same colors, Windows 2003 does not seem to dither at all, but to choose the closest available color. I strongly prefer the latter, as I don't care for the exact colors, I just want to be able to read easily. I am not sure whether this is operating system-related. The programs on the remote systems do not allow me to change the color choices for the various backgrounds to anything sane. Is there a way to disable this color dithering using some target operating system setting that will do the trick for both Terminal Services and TeamViewer?

  Read the article

• When copying VM filesystem over netcat, dd copies double the disk size

  - by JivanAmara

  I'm attempting to copy the disk of a working headless virtualbox VM (VM1) on one server to a new VM (VM2) on a vCloud server. I don't have access to the host of VM2. The OS is Windows Server 2003 (32-bit) I start both VMs with a live Knoppix image. I run 'nc -l | dd of=/dev/sda bs=512' on VM2 I run 'dd if=/dev/sda bs=512 | nc ' on VM1 I previously did this with another windows VM and it worked fine. VM1 has a disk of size ~70GB (verified with fdisk); however, the amount of data dd reports read/written is ~139GB. Of course the target machine doesn't work properly. I get a Windows splash screen, then blue error screen with general 'system not working' information. I'm at a loss what could cause this. Any ideas?

  Read the article

• How to avoid copying corrupted files with rsync

  - by Roberto Aloi

  I have an HDD with plenty of files, some of which are unfortunately corrupted. I'm now trying to copy the good files into a new HDD. I'm using: rsync -azP SRC TGT When rsync comes to one of the corrupted files, I can see a message in the console: rsync: read errors mapping XXX: Input/output error (5) In the target folder, I still see the corrupted file, which I'm not able to open and which I have to delete manually. Is there any option to tell rsync not to copy files after a i/o error?

  Read the article

• Creating an app shortcut in Windows 7 XP Mode

  - by MT_Head

  I have a VERY old legacy app that I've managed to move from machine to machine; the installer for it doesn't actually work under newer versions of Windows, but I was able to track down the registry changes and DLL registrations necessary to make it work. I'm able to create a desktop icon in my XP mode environment, and the program works... but I'd like to add an icon to the Windows 7 menu, and run the program in semi-native mode. For example, the icon for Microsoft Security Essentials in XP mode has the following target: %SystemRoot%\system32\rundll32.exe %SystemRoot%\system32\VMCPropertyHandler.dll,LaunchVMSal "Windows XP Mode" "||232f633" "Microsoft Security Essentials" Now, the only part of that that seems to be "magic" is "||232f633" - does anyone have any idea where that comes from, or how to identify the correct equivalent for an arbitrary program? I gather that, had the program been installed normally through a .msi file (or WISE, or NSIS, or what have you), this id would have been generated automagically... Thanks for any insights!

  Read the article

• Host a Debian repository on a Windows Web/Ftp server

  - by Dave

  At the risk of causing a matter vs. antimatter paradox that would end the world as we know it ... Is it possible to host a Debian repository on a Windows server? We have some applications which are available for Windows, Mac OS X, and Linux. Our web site, from where the application can be downloaded, is a Windows Server 2008 box running IIS 7. That is not going to change, and I would like to avoid having to purchase another server and/or domain. I would like to take advantage of the Debian packaging system so that I can just instruct users to add our repository to their software sources, and then they can install, get updates, resolve dependencies (some of which are not yet in the stable/main distributions of my target platforms), etc. The instructions I can find on the internet require linux-specific tools to create a local repository, but are unclear as to whether or not that can be copied to an FTP site as is, or if it requires some local daemons to be running or something.

  Read the article

• Scripting help - need to get phone number of AD accounts and then add them to contacts in trusted domain

  - by TheCleaner

  I have domain accounts that I have created as contacts in another trusted domain so that they can see them in their Exchange GAL. I need a way to extract the phone number field from UserA (user account) in DomainA and import it into UserA (contact) in DomainB. I get the logic, it's just the code (vbscript/powershell/whatever) that eludes me. The logic as I see it: Connect to source AD (ou/subtree) Extract user accounts from OU and subcontainers including first name, last name, display name, and phone number Connect to target AD (ou/subtree) Verify/match contact with extract in #2 above based on display name Update phone field with phone number in extract Write log of success and failures Anybody able to help?

  Read the article

• Emulate a USB port as a USB flash drive?

  - by Wilco

  Does anyone know of any software that can emulate a USB flash drive through an available USB port in OS X? Perhaps some way to map a directory to a USB port that could then be connected to another device that supports reading USB storage devices? I'd love to connect my laptop to my car's USB port and access files as if it were a USB drive. I know about the target disk mode with firewire (not sure if this is also supported over USB), but I was hoping for something that doesn't require booting outside of the OS (I want to retain use of the machine). Any ideas?

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >