Search Results

Search found 4343 results on 174 pages for 'verizon wireless'.

Page 150/174 | < Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >

• Remote HTTP to FTP

  - by jamd12

  I am on a very slow download with the internet that I have and unfortunately I only have access to expensive and slow wireless or satelite. I have set up an FTP with a computer supplier locally who has a nice 2 Mbps speed and am trying to set up a way of adding links remotely (Hotfile, rapidshare, Fileserve, etc.) so that they can be downloaded onto the FTP and then transfered a few times a week manually onto a portable HDD. On my home PC I use Internet download manager for all my downloads. Is there a simple way that I can add links remotely to Internet Download Manager on the FTP or perhaps another solution? The OS on the FTP is Linux - I use Windows XP SP3 and Windows 7. I have not used FTP very much before so any suggestions on how best to do this would be much appreciated.

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• Can I use static routing to allow me to use my public IP from my LAN?

  - by jnm2

  I would like to be able to use the same hostname to connect to my computer from my phone whether I'm at home or away. Currently I have to maintain duplicate entries for remote desktop, for instance. My router doesn't seem to have a NAT loopback option. I have two routers in fact, a cable modem which goes straight to my main router which does wireless. I can add to the static routing tables on each. Can I use this to loopback the public IP or do I need different routers?

  Read the article

• Computer connects to lan, but not the internet

  - by Jay

  I have a computer with Vista Home that can connect to the router, but it cannot get on the internet. I cannot ping google.com, the request times out. I've tried this on two separate networks and have no trouble with other computers connecting. I've renewed ipconfig, reset winsock, updated the wireless adapter, and the hosts file looks fine. I've tried disabling the firewall as well as a direct wired connection. I did a scan with Norton and it didn't find anything. Is there anything else I can try before resorting to a system restore? Update (Copied from Answer) Windows Update was able to find updates and install them (though, they could have already been downloaded previously). When I pinged Google by using their IP 66.102.9.103, it said it lost 25 percent of the packets. I successfully flushed the DNS but it didn't help. Also, I found safe mode with networking works fine.

  Read the article

• Sharing files between multiple computers?

  - by Koalatea

  At my school, we have 13 iMacs that we use to make our yearbook. Currently our school has some servers for us, but since we work with so many files ( thousands of pictures, most of which are ~3MB ) it slows down far too much. Is there a way to better share files between our computers? We are on a wireless network and the whole school shares the same servers, we have around probably 400 computers in the school. Is there a hardware fix I can do? Something like buying an external and hooking only yearbook computers to it?

  Read the article

• Run a service after networking is ready on Ubuntu?

  - by TK Kocheran

  I'm trying to start a service that depends on networking being started, whenever the computer is rebooted. I have a few questions: Is this easily possible from an /etc/init.d script? I have tried creating a script here (conforming to the standards), but I'm really doubtful that it's even running on boot, let alone working. When I test it manually, it works. I've seen the new Upstart service, but as far as how that actually works, I'm completely in the dark. How can I make a script that runs on boot which runs after networking has been started? If I could run it after connected to wireless network, even better :)

  Read the article

• Home router for higher network loads

  - by Zizzencs

  I'm trying to find a replacement for my ASUS WL500GP router. Some constraints: my ISP now provides 120 Mbit bandwidth - the router must be able to handle it I have 3 computers and a laptop at home - the router must have at least 4 LAN ports and the WAN port I need to be able to do the following in parallel: use bittorrent with ~1000 connections transfer files from one home computer to another at high speed access one home computer from my workplace I don't really need wireless I don't really want two boxes to serve all these purposes. So I was searching for a router with 1 Gbit ports, jumbo frame support and good reviews, but haven't really found a promising candidate so far. Any suggestions?

  Read the article

• Linux distro for acer 4741G laptop

  - by sandundhammikaperera

  Hi all, I need to install linux for my acer 4741 laptop. Anyone who did this before and managed to solve the device driver problems please share your experience with me. I already installed the backtrack linux and I able to make it work the both wireless and wired network connections and also the sound card is also working. But the problem is that I unable to configure 1360x768 resolution of the display. The display looking really flat and ugly under that linux. some help ? can you guide how to correctly configure the /etc/X11/xorg.conf ? --Thanks in advance--

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by user36777

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• cannot using internet in VMWare

  - by user66247

  I am using VMware Workstation version 7 on Ubuntu 10.10. I installed Windows XP service pack 3 for guest os. Within VMWare, I am using bridge connection that I assigned static IP address to be able to ping host IP address but I cannot ping default router gateway. I also tried to command "/etc/init.d/vmware start" on terminal. All tasks are able to start successfully except "VM communication interface socket family" I am not sure that how to setup network for my VMWare by using wireless. Thanks in advance.

  Read the article

• Open Source Outlook and Exchange Alternative (for Calendar and Tasks)

  - by Elmar Weber

  We're using an Exchange Server and Outlook in a private context. Since Exchange is getting more and more of a monster to maintain and is basically the only thing running on a Windows VM Server, I'm looking for an alternative with the following properties: Server based back-end that that can be installed / deployed on my machine and is not dependent on any third party services (e.g. Google Calendar). (Easy) import of existing Outlook calendars, either via some feature of Exchange or by ex- and importing from Outlook. Roughly the basic features of the Outlook calendar (categorizations, series, etc) Synchronization with the iPhone over wireless without a hitch (e.g. double or missing entries) Any recommendations?

  Read the article

• Kernel Compiling from Vanilla to several machines

  - by Linux Pwns Mac

  When compiling kernels for machines is there a safe or correct way to create a template for say servers? I work with a lot of RHEL servers and want to compile them with GRSEC. However, I do not wish to always rebuild off of the .config for each machine and go in and remove a bunch of unrelated modules like wireless, bluetooth, ect... which you typically do not need in servers. I want to create a template .config that can be used on any machine, but is there a safe way to do that when hardware changes? I know with Linux, at least from my experience, you can cross jump hardware way easier then Windows/OSX. I assume that as long as I leave MOST of all the main hardware modules/CPU in that this could create a .config that would work for all or just about any machine?

  Read the article

• Not getting my normal internet speed but my other computers can?

  - by Dennis

  I have Comcast Xfinity and I cannot reach anywhere near my promised speed. My family desktop which is hardwired into the router reaches to 60Mbps and so do my parents computers and my brothers. I cannot seem to get anywhere close to it, I know with being wireless I won't reach it, but I should at least get somewhere close. I can only pull 6Mbps and thats terrible for what I should be receiving. Any clue what could be wrong here? Edit: I have 100% signal and I'm not behind any walls

  Read the article

• wifi key masking

  - by Warren Bullock III

  Hello, We currently utilize wifi access in some of our buildings, we are not using RADIUS at this point, but we are using WPA2 with PKI, the issue has recently come up that we want to keep our key private so we generally setup access for our users providing them the wifi key. The problem is that windows seems to give the option to go back into the wireless properties and unmask the PSK. We need to resolve this ASAP is there a way to make certain that the PSK remains masked regardless even if your logged in as a local administrator to the machine? Thanks in advance.

  Read the article

• Networking issues with WNR3500L

  - by ageis23

  When I try connecting to my wireless network it attempts to connect then gives up. There's something strange going on with the mac's. The eternet switch and all the vlan interfaces have a mac 00:FF:FF:FF:FF:FF. config 'switch' 'eth0' option 'vlan0' '2 3 4 8*' option 'vlan1' '0 8' option 'vlan2' '1 8' config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'type' 'bridge' option 'ifname' 'eth0.1' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ipaddr' '192.168.2.1' option 'ip6addr' '' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' option 'ipaddr' '192.168.1.8' option 'ip6addr' '' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.253' option 'ip6gw' '' option 'dns' '192.168.1.253' config 'interface' 'dmz' option 'ifname' 'eth0.2' option 'proto' 'static' option 'ipaddr' '192.168.0.1' option 'netmask' '255.255.255.0' Any help on this will be greatly appreciated! When I try setting the mac using macaddr it does nothing. It works perfectly fine when I turn the authentication off.

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

• Cannot access internal network on OSX 10.6.6

  - by cabuki

  Last week, I began having trouble connecting to our internal web servers. Usually, a refresh would take care of it or switching to a different wireless network, but as of yesterday, this wasn't enough. We have an internal DNS server using dnsmasq and a private internal host name (us.lcl). Once I started having more issues with the names not resolving, I tried pinging the server. Using the internal host name (s1.us.lcl), it failed. I tried using the IP address, but that also failed. I have no problems accessing external sites with the exception of it being a bit slower than normal. A reboot yesterday at lunch time after following the instructions here seemed to fix the issue, but when I came into the office this morning, it had stopped working. As of this posting, I cannot ping, ssh or access the web server using the internal host name or ip address. I'm the only one running 10.6 in my office and none of my colleagues has this issue.

  Read the article

• Opinion choosing Switch

  - by mastercode

  ) i have to reestruct a LAN network, with (currently) +/- 60hosts connected ... i have File Servers hosted, VoIP Phones,wireless AP's,printers, scanners, plotters,biometric dispositive,and 2 QNAP TS412 as FileServer and BackupServer, a Mac Mini as main Server of almost all services that need server ... and, a HP V1910-24 (L2+) and another two switches,but, only L2. which switch in your opinion, could fit better this reestruct, to ensure a VLAN division- and have to support Inter VLAN routing also - provide better performance, and also, allow a Future expansion. the budget, is low xD hehe!!

  Read the article

• Need reasonably priced router with QoS support [closed]

  - by ULTRA_POROV

  I dont need wireless. I am expecting very heavy traffic, with possibly thousands of tcp connections open at one time. This would require that the router has good hardware. I also need to limit the different services i will provide. Lets say i need to guarantee 60% of all the bandwidth to HTTP, 10% FTP, and 10% for Mail... So the router software must have flexible QoS options as well. I don't know which one to chooose, because this information is usually not given on the router specs.

  Read the article

• How can I monitor ports on Windows?

  - by Olav

  What is the simplest way on "local" (1*) Windows, for known ports, to: Find out if it is used. Find out as much as possible about what is behind the port. Find out as much as possible about traffic through the port. Find out if something else is interfering with the port and traffic to it. I have used Fiddler in the past, but I think that's mostly HTTP? I don't if Wire-shark does more? I think there is a tool closely integrated with Windows? Which one? (5). I am looking at NMap, but its seems to be more a suite of tools, and a high entry level. 1*: Primarily this is for what happens inside my Windows Machine, but if necessary, I can for example use a VM, or the wireless connection.

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by badnaam

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• Logitech SetPoint update seems to be hanging

  - by Rod

  I've just gotten a new Logitech Wireless Wave Combo MK550 mouse and keyboard. I pulled it in, and have installed the software that came on the CD, which is SetPoint 6.15. After installing it, it said that it had an update, so I started the installation for that. Now it's at a point where it says, "Approximately 30 second remaining...". It has been that way for 30 minutes, not 30 seconds. So, what's going on? I'm installing this on a Windows 7 Home Premium system, 64-bit OS.

  Read the article

• How would I Enable FTP on Home PC (Win7)?

  - by jp2code

  In my home, all PCs connect through a small router. Some wired and some wireless. Our Media PC (HTPC) is controlled via a Media Center TV style remote, so managing files on it is tedious. I can access all of the files on the HTPC from my desktop PC, but moving a 6 GB file from \\HTPC\Folder1 to \\HTPC\Folder2 involves copying the data to the desktop and then transferring it back. If I were on the HTPC, this would likely be handled by a simple address change for the file (i.e. it would be done almost instantly). I'm thinking if I could get an FTP program to connect to the HTPC, I could simplify things ...but how do I enable that ability on the HPTC? Then, how would I go about connecting to the HTPC? Would I simply enter \\HTPC as the FTP address?

  Read the article

• What security changes are necessary when connecting DSL modem directly to PC instead of router?

  - by Mike B

  Windows XP I have a user with a single PC that was connected to the internet via a standard home router. The router is now having hardware-related issues and to save money, they're considering connecting the PC directly to the DSL modem since they don't need to share the internet connection or need wireless functionality. If they decide to do that, I'm concerned that this will introduce additional security concerns. Is the Windows Firewall sufficient and Microsoft Security Essentials sufficient for protecting a computer directly connected to a DSL Modem? Or is other security software needed here? Ideally, I'd like to avoid having third-party firewall software constantly bringing up alerts and asking them to approve everything. Also, just to clarify, their use cases are just internet browsing and email.

  Read the article

• How to route traffic via another machine before the default gateway

  - by Rich

  At the moment I have a router on 192.168.0.1, a Linux box on 192.168.0.2 and desktop clients from 192.168.0.3. Everything works with 192.168.0.1 as the default gateway. I'd like to send the traffic from the desktop clients via the Linux box before it goes out through the router so I can sniff the traffic (some of these are wireless connections). Can I set the default gateway to 192.168.0.2 on the desktop clients and then perhaps add some iptables rules to forward this traffic through 192.168.0.1? Quite happy to change the client desktops to another subnet if that makes it easier. Thanks in advance.

  Read the article

< Previous Page | 146 147 148 149 150 151 152 153 154 155 156 157  | Next Page >