Search Results

Search found 16174 results on 647 pages for 'disk space'.

Page 151/647 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

  • slow software raid

    - by Jure1873
    I've got software raid 1 for / and /home and it seems I'm not getting the right speed out of it. Reading from md0 I get around 100 MB/sec Reading from sda or sdb I get around 95-105 MB/sec I thought I would get more speed (while reading data) from two drives. I don't know what is the problem. I'm using kernel 2.6.31-18 hdparm -tT /dev/md0 /dev/md0: Timing cached reads: 2078 MB in 2.00 seconds = 1039.72 MB/sec Timing buffered disk reads: 304 MB in 3.01 seconds = 100.96 MB/sec hdparm -tT /dev/sda /dev/sda: Timing cached reads: 2084 MB in 2.00 seconds = 1041.93 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.77 MB/sec hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 2150 MB in 2.00 seconds = 1075.94 MB/sec Timing buffered disk reads: 302 MB in 3.01 seconds = 100.47 MB/sec Edit: Raid 1

    Read the article

  • How do I remove Windows Update uninstall files on Windows Server 2008?

    - by Robert Koritnik
    I'm running Windows Server 2008 Standard running in VMware. It has 2 disks: system disk: 16 GB data disk: 500 MB I installed Visual Studio 2008 SP1 + MSDN and some small tools and libraries that don't take much space. Over time the system disk's free space has been going down (I suspect because of regular system updates - NetFx (.NET), service packs, and regular updates). Questions 1 How do you remove Windows Update uninstall files from Windows Server 2008? Question 2 I also found lots of files in C:/Windows/Installer folder. Is it possible to determine which .msp file goes with which patch? I would like to delete some of them, because they do take a lot of space.

    Read the article

  • 8400GS causes BSOD in Acer M1610 running Windows 7 32-bit

    - by Arch Angel
    Title says it all, just installed the Nvidia card, I know this is a driver related issue I just don't know how to fix it I cannot find a driver version that will work not even the one that windows selects for the card, or the one on the disk supplied with the card. Any help will be appreciated. BSOD output: What happens when I try to install Any driver that does install causes a BSOD the driver disk says it supports windows 7 and the drivers on the disk cause a BSOD too i'm at a loss of what to do. EDIT: Yes I uninstalled the intergrated drivers. PCIE x16 Card from Gainward Tried multiple driver versions Versions that wont install because they cannot pick up card 190.38, 191.07, 196.21, 197.45 Versions that install and cause BSOD 258.96, 260.99, The drivers on the disc (not sure of the version) and drivers from the gainward website (driver version 263.14)

    Read the article

  • Resize the /var directory in redhat enterprise edition 4

    - by Sri
    I am running NDB mysql. the log files fills up the /var directory. therefore i cant start the ndbd service now. as a temporary fix, i have deleted the log files and again working fine. but again the log files fill up the /var directory. i got plenty of space in other partition. therefore i would like to swap the partition from one directory to /var. here if my input from df -h Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 ext3 54G 2.9G 49G 6% / /dev/cciss/c0d0p1 ext3 99M 14M 81M 14% /boot none tmpfs 1013M 0 1013M 0% /dev/shm /dev/cciss/c0d0p2 ext3 9.7G 9.7G 0 100% /var there are plenty of space in /dev/mapper/VolGroup00-LogVol00. Therefore i will like to swap 10 G space from this directory to /var. could you please help me out to solve this problem?

    Read the article

  • Running ubuntu 10.04 without a laptop's primary display

    - by riteshmnayak
    I have an IBM thinkpad(R50e) whose display is broken. I would still like to use the laptop by connecting it to an external monitor and keyboard/mouse. This is what I did: Removed the hard disk from the broken IBM Put the hard disk in the working IBM and installed 10.04 on it. It booted fine and I installed many packages and stuff. I put the hard disk back into the broken display IBM thinking I could use it by connecting it to an external monitor that I own. Well, it turns out that while booting, the display shows up but because the display shifts from the VGA display to the primary display mid-boot, the laptop does not boot. Is there a way in which I can force the laptop to not use its primary display while booting. I looked at Randr and also grub.conf settings but nothing seemed to work. Please help!

    Read the article

  • Renaming an Invalid Filename in NTFS

    - by Sadeq Dousti
    Recently, I loaned my flash disk to one of my friends, who had Mac OS. He copied a file on it, whose name included a backslash (\). The flash disk is NTFS formatted. Windows does not allow such filenames, and neither opens the file, nor deletes it, nor lets me delete the file. There are naive approaches to this problem, like: Formatting the flash disk; Giving it back to my friend and asking to rename it; Loading into some live Linux and renaming it. However, I'm looking for something more clever, like a program that can do the trick under Windows. PS: There's a tool called NTFSWalker which can browse the MFT records of the NTFS, but is unable to make any changes to them.

    Read the article

  • Prevent Windows 7 from unpluging External HDD [migrated]

    - by marverix
    I have installed Windows 7 as my media server. I pluged in 500GB external HDD via USB. I have changed power plan to Best Performance and changed advenced power settings to never turn off HDD etc. I even yesterday wrote powershell script (create and delete folder on this disk) and I have added it to harmonogram to run every 5 minutes starting from system boot. And nothing! Disk after some time (I realy can't say when) is turning off and Windows show "Unknown Device" in Device Manager. Then only system reboot or disk reboot helps. Any ideas how to prevent Windows 7 from stopping my external HDD? Cheers!

    Read the article

  • Restoring factory recovery partition (samsung)

    - by user974896
    I have upgraded the HDD in a Samsung laptop and would like to restore the "Press F4 for recovery" partition. My new disk has three partitions, System, Windows, and Recovery. I did a dd of the recovery partition from the old HDD to the new. I also set the diag flag on the new HDD. F4 recovery still is not working. tldr: I mapped my new disk like my old disk with the exception of exact sizes. I did the recover partition from old to new via livecd. F4 recovery does not work

    Read the article

  • How to Extending a logical volume in WMWare

    - by Mercer
    down vote favorite i have a CentOS 6.3 into my Virtual Machine. I have 2 Disk: Disk#1 = 18G Disk#2 = 20G [root@vm ~]# df -h Filesystem Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_system-lv_root 1008M 250M 708M 27% / tmpfs 1.9G 0 1.9G 0% /dev/shm /dev/sda1 194M 31M 154M 17% /boot /dev/mapper/vg_system-lv_home 504M 17M 462M 4% /home /dev/mapper/vg_system-lv_opt 2.0G 68M 1.9G 4% /opt /dev/mapper/vg_produits-lv_grid 6.9G 2.5G 4.1G 38% /opt/grid /dev/mapper/vg_produits-lv_oracle 6.9G 144M 6.4G 3% /opt/oracle /dev/mapper/vg_system-lv_tmp 2.8G 71M 2.6G 3% /tmp /dev/mapper/vg_system-lv_usr 2.5G 1.6G 799M 67% /usr /dev/mapper/vg_system-lv_var 2.0G 278M 1.6G 15% /var So i want to extend my /tmp and my /opt/oracle like this: 10Go in/tmp 13Go in /opt/oracle Thx.

    Read the article

  • Mimicking Google's Persistent Disks -- Is this a logical FreeBSD disaster recovery strategy?

    - by Casey Jordan
    I am looking into FreeBSD to provide a more comprehensive backup and disaster recovery strategy for database servers. Ideally I want to mimic what google is doing with "Persistent disks" https://developers.google.com/compute/docs/disks#snapshots I am hoping someone who knows more about FreeBSD can validate these ideas/questions: I have read that FreeBSD can take instant disk snapshots, therefore if our databases trigger a consistent state (Block all writes, and flush buffers to disk), I would assume I could take snapshots every hour without service interruption for more than a few seconds. Is this true? Is there a way to take snapshots and back them up offsite easily? Can this be done incrementally as to save how much disk space is actually used? If a rollback needed to be done, how long does this typically take? Is a rollback also instantaneous? Thanks!

    Read the article

  • Database implementation question?

    - by gundam
    consider a disk with a sector size of 512 bytes, 2000 tracks/surface, 50 sectors/track, 5 doubled sided platters, average seek time is 10 msec. Assume a block size of 1024-byte is selected. Assume a file that contains 100,000 records of 100-byte each is to be stored on the disk, and NONE of the reocd can be spanned 2 blocks. How many blocks are needed to store the entire file?? If the file is arranged sequentially on disk, how many surfaces are required?? Now, i have calculated that 10,000 blocks are needed to store 100,000 records. But i am not sure how to find out the answer of the surfaces required. I only calculated the capacity of track is 25KB and capacity of surface is 50,000 KB But I don't know how to calculate the number of surfaces... Could anyone help me how to get the answer? Thanks a lot!!

    Read the article

  • Is it possible to create a Mirror or Stripe volume for the boot partition in Windows 2008/R2?

    - by Georgios
    Hello, I have a server with two identical disks and I have installed Windows Server 2008 R2 on C, which is a 60GB volume on Disk 0. Using the disk manager, I have attempted to create both a Mirror and Stripe volume in Disk 1 but every time I get the same error "No extents found in the plex". This error occurs after Windows has converted both disks to Dynamic. The fact that the manager allows me to attempt to do this would point to the fact that this is possible. However I have been unable to find any solutions to this error. Any ideas on how to solve this? Thanks Georgios

    Read the article

  • How to use HFS formatted pen drive in Windows 7?

    - by row-sun
    I recently used disk utility in my mac book pro to format my 8 GB pen drive to install OS X. After that I formatted my pen drive from disk utility as FAT32 so that I would be able to use it in windows. But in windows the pen drive does not show up. When I right click on my computer and click manage and then disk management, the pen drive is listed there, but it doesn't show up in the explorer and I cant use it. I tried to do many things but I'm still not being able to use it in windows though I can use it in Mac OS X. Could anyone help? Thanks.

    Read the article

  • Occasional HDD Related Hangs

    - by diolemo
    I have an issue that seems to be disk related. Occasionally my system will block for 30 or so seconds and is mostly unresponsive. Those things already in memory requiring no disk access continue to function but those things requiring disk access (even small) hang. 30 seconds later everything is back to normal. I have 2 Samsung drives in RAID 0. I have 1 WD drive (has pagefile) I have an SSD used for caching (Intel Smart Response). This is a new install of Windows and the drives were fine in my old PC (~1 month ago). Has anyone experienced anything similar? Any suggestions to solve this one? Thanks in advance.

    Read the article

  • Windows 7 System Image Restore to SSD - SSD not detected?

    - by steviey
    I recently bought a new SSD (OCZ Vertex 2 120GB) as a replacement for my laptop HDD . I created a System Image on an external drive using the Win 7 backup and restore tool and then restored this image to the SSD using the Win 7 disk. AHCI is enabled in Win 7 and the BIOS, but it seems that windows is not detecting the disk as an SSD because, in the defragger, the disk is still available for defragging. Prefetch and Superfetch were also still enabled. I have manually disabled scheduled defragging, prefetch and superfetch. I have also checked that TRIM is enabled using: fsutil behavior query DisableDeleteNotify and the result is '0' (it is). Performance seems ok, but not quite as fast as I expected. Was restoring from a win7 generated system image a mistake? Am I getting optimal SSD performance?

    Read the article

  • Configurarion of Alert on Windows Server 2003

    - by Ferre06
    I'm trying to configure an alert on low space on disk in Windows Server 2003, I already followed this step by step tutorial of microsoft. I try to execute a bat file created by me, located on the home folder of the user I'm using. I seted to trigger when the free space is below 6 GB when the disk have lower free space than 6 GB, the "Sample data interval" is the default (5 seconds). The problem is that the alert isnt triggered. And another thing, the user that is seted for the alert isnt the root user, but It have administration privileges. Thanks in advance

    Read the article

  • Why sizes are different, and what do they mean?

    - by Ramy
    I have a 1 TB hard drive that consists of one NTFS partition which I use to back up my data (no operating system). The size of all the data in it is : 726 GB, size on disk: 728 GB, and the used space when I check the properties is: 731 GB. There's a 5 GB difference between the size and the used space. Why is that huge difference there? What's the difference between these sizes? (size, size on disk, and used space) Is there a way to calculate the difference, and be sure the HDD is not messing around? Is that normal?

    Read the article

  • How to expand Raid 5 on ICH10 - Gigabyte ex58-ds4?

    - by NeverEatAlone
    I was wondering if there is a relatively simple way to expand my HD space. My setup is 4 x 640 GB drives. Motherboard has 4 ports on 1 controller and 2 ports on another controller, however they cant be joined. I would like to somehow get more store space in raid configuration. One scenario that I can see working is replacing one 640 drive for a 2TB drive. Waiting for Raid to rebuild. Rinse and repeat. However, I have no idea if I would be able to even see/access the new space. All alternatives / ideas are welcome. Thank you

    Read the article

  • Database implementation question? [closed]

    - by gundam
    consider a disk with a sector size of 512 bytes, 2000 tracks/surface, 50 sectors/track, 5 doubled sided platters, average seek time is 10 msec. Assume a block size of 1024-byte is selected. Assume a file that contains 100,000 records of 100-byte each is to be stored on the disk, and NONE of the reocd can be spanned 2 blocks. How many blocks are needed to store the entire file?? If the file is arranged sequentially on disk, how many surfaces are required?? Now, i have calculated that 10,000 blocks are needed to store 100,000 records. But i am not sure how to find out the answer of the surfaces required. I only calculated the capacity of track is 25KB and capacity of surface is 50,000 KB But I don't know how to calculate the number of surfaces... Could anyone help me how to get the answer? Thanks a lot!!

    Read the article

  • Resizing 2 partitions (NTFS and ReiserFS3)

    - by steven
    When creating a Win7 and Gentoo setup I miss allocated the space needed for Windows and Linux. I have a 320 gb drive and created a 40gb partition on Win7 and used the rest of the space on Linux. Now I need about 70gbs on the NTFS partition. Are there any tools that will shrink the ReiserFS3 partition? (It is using about 80gbs and has the reset free), while growing the NTFS partition? If I have to clone, does the tool copy freespace inside the image? I would prefer this not happen as that I'm sort on backup space. [I can handle a 100-150gb of images, but I can't copy the entire HD]

    Read the article

  • Mimicking Google's Persistant Disks -- Is this a logical FreeBSD disaster recovery strategy?

    - by Casey Jordan
    I am looking into FreeBSD to provide a more comprehensive backup and disaster recovery strategy for database servers. Ideally I want to mimic what google is doing with "Persistant disks" https://developers.google.com/compute/docs/disks#snapshots I am hoping someone who knows more about FreeBSD can validate these ideas/questions: I have read that FreeBSD can take instant disk snapshots, therefore if our databases trigger a consistent state (Block all writes, and flush buffers to disk), I would assume I could take snapshots every hour without service interruption for more than a few seconds. Is this true? Is there a way to take snapshots and back them up offsite easily? Can this be done incrementally as to save how much disk space is actually used? If a rollback needed to be done, how long does this typically take? Is a rollback also instantaneous? Thanks!

    Read the article

  • Trouble loading an ISO

    - by crocyson
    I've created a boot disk and ISO image with paragon. I boot up the Virtual pc with the disk in and I get to my recovery page. When I am supposed to select an ISO image? My Virtual PC doesn't acknowledge any of my physical hard drives on my host PC. I've also tried copy/paste the files into my datastore and they do not show up. I've tried the option during the set up to start with the ISO but again I am not able to browse to my external hard drive that I have stored the ISO on. VMWare will acknowledge it and say that it is connected but I can't browse to it. Am I doing something wrong? I created the back up disk and ISO image on the external with paragon.

    Read the article

  • LVM vs RAID0 vs RAID "linear" - Combine 2 disks as one, data recovery?

    - by leto
    Hi there, given two 2TB USB external disks that have to be combined to one 4TB volume and formatted with one big Filesystem (XFS), I have a small question to ask. Does LVM provide better Data recovery, should one disk be unplugged/damaged by being able to recover the data of the still working disk or is everything lost? I would appreciate a solution where only the data of one disk is lost and I can recover the content of the other with the usual filesystem/lvm/raid tools. Is that possible with LVM or RAID "linear"? This is for storing unimportant files that can be retrieved from backup, but I want to save time :) Thank you in advance

    Read the article

  • Mac and different Spaces: conserving the windows arragement when changing the external monitor

    - by user10826
    Hi, I use Mac OS X Leopard with 4 different Spaces and an external monitor at workplace, which is located above the laptop. On each Space I work on a different project, with different terminal windows and Xcode and Finder windows. The problem happens when I am at home, then I use an external monitor but now located at left position. When the MacBook wakes up, everything gets messed up and even some windows switch from one space to another. Could I somehow fix it so always the windows belonging to one Space remain there and also the association to main/external monitor even if I change to another external monitor? Thanks

    Read the article

  • recovering vm data from crashed XenServer install

    - by user58983
    We're using xenserver 5.6 from citrix to run our virtual machines. The box is old and creaky, and the hard drive went. (We had a super limited budget of $0 at the time). Turns out the only machine on there we actually needed, was the only one not backed up... anyway, we've replace the hard drive, and reinstalled xensever. however while trying to find our old vm disk images, i have no idea where they sit, and i'm beginning to think they're on a lvm partition? is there anyway to access the disk images from the old vm's on this hard disk, which is attached to the xenserver machine via a usb-sata converter?

    Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >