Search Results

Search found 4864 results on 195 pages for 'resolv conf'.

Page 151/195 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

• 5.1 surround sound

  - by rocker9455

  Ok, So i've always had trouble with enabling 5.1 in ubuntu. Running 'alsamixer': I have: Master, Heaphones, PCM, Front, Front Mi, Front Mi, Surround, Center All are at 100% Card:HDA Intel Chip:Realtek ALC888 (This is my onboard sound, Its a dell studio, with 7.1 integrated sound) Running "speaker-test -c6 -twav" I only get the front 2 speakers (Right/Left) making any noise. The others make no noise at all. I have no other sound card to use as all my PCI slots are used up. Daemon.conf: ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10

  Read the article

• How to run software, that is not offered though package managers, that requires ia32-libs

  - by Onno

  I'm trying to install the Arma 2 OA dedicated server on a Virtualbox VM so I can test my own missions in a sandbox environment in a way that lets me offload them to another computer in my network. (The other computer is running the VM, but it's a windows machine, and I didn't want to hassle with its installation) It needs at least 2, and preferably 4GB of ram, so I thought I would install the AMD64 version of ubuntu 13.10 to get this going. 'How do you run a 32-bit program on a 64-bit version of Ubuntu?' already explained how to install 32bit software though apt-get and/or dpkg, but that doesn't apply in this case. The server is offered as a compressed download on the site of BI Studio, the developer of the Arma games. Its installation instructions are obviously slightly out of date with the current state of the art. (probably because the state of the art has been updated quite recently :) ) It states that I have to install ia32-libs, which has now apparently been deprecated. Now I have to find out how to get the right packages installed to make sure that it will run. My experience level is like novice-intermediate when it comes to these issues. I've installed a lot of packages though apt-get; I've solved dependency issues in the past; I haven't installed much software without using package managers. I can handle myself with basic administrative work like editing conf files and such. I have just gone ahead and tried to install it without installing ia32-libs through apt-get but to install gcc to get the libs after all. My reasoning being that gcc will include the files for backward compatibility coding and on linux all libs are (as far as I can tell) installed at a system level in /libs . So far it seems to start up. (I can connect with the game server trough my in-game network browser, so it's communicating) I'm not sure if there's any dependency checking going on when running the game server program, so I'm left with a couple of questions: Does 13.10 catch any calls to ia32libs libraries and translate the calls to the right code on amd64? If it runs, does that mean that all required libraries have been loaded correctly, or is there a change of it crashing later on when a library that was needed is missing after all? Is it necessary to do a workaround such as installing gcc? How do I find out what libraries I might need to run this software? (or any other piece of 32-bit software that isn't offered through a package manager)

  Read the article

• Dynamic Bind9 + DHCP

  - by AcidRod75

  i have been working on setup a server for my internal network, so far i have a working isc-dhcp-server that can upgrade a chrooted BIND9 (on the same machine), i need to add some static entries on the DNS, so users can resolve the websites that resides in our DMZ. What i had tryed all ready was to modify the /etc/bind/named.conf.local with this info: // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; key DHCP_UPDATER { algorithm HMAC-MD5.SIG-ALG.REG.INT; secret "MySuperSecretHash"; (this is not the real value BTW) }; zone "quality.internal" IN { type master; file "/var/lib/bind/quality.internal.db"; allow-update { key DHCP_UPDATER; }; }; zone "0.10.10.in-addr.arpa" { type master; file "/var/lib/bind/rev.10.10.0.in-addr.arpa"; allow-update { key DHCP_UPDATER; }; }; logging { channel query.log { file "/var/log/named/query.log"; severity debug 3; }; category queries { query.log; }; }; --- EOF ---- then i added this 2 entries: zone "ourserver.internal" IN { type master; file "/var/lib/bind/ourserver.internal.db"; }; zone "0.16.172.in-addr.arpa" { type master; file "/var/lib/bind/rev.172.16.0.in-addr.arpa"; }; ---- EOF ---- So.. i created the files ourserver.internal.db and rev.172.16.0.in-addr.arpa placed them BOTH in /var/lib/bind/ and changed the permisions so the bind user can access them, restated the service... when i do a NSLOOKUP www.ourserver.internal i get: Server: 127.0.0.1 Address: 127.0.0.1#53 ** server can't find www.ourserver.internal: NXDOMAIN BUT when i do a reverse lookup.... Server: 127.0.0.1 Address: 127.0.0.1#53 5.0.16.172.in-addr.arpa name = www.ourserver.internal I do not understand what's wrong. Some help with this will save me from installing a new DNS server at the DMZ JUST to host internal site names- TY in advance BTW: the server i'm using has Ubuntu Server 11.10 fully patched.

  Read the article

• Nvidia driver overscan issue second monitor via dvi-d cable

  - by benmichael

  Ok, I know that I have a bit of a bizarre setup, but here goes. I have an old laptop, HP Pavilion 6000. The graphics card in there is a GeForce 7150M. The monitor connection is an old 18pin. The external monitor I use is a Samsung SyncMaster 2333. Don't ask me why, but this monitor only has a dvi-d connection (yes, i have searched it). So I have the monitor plugged into the laptop. If I use any of the Nvidia propriety drivers and try to set the resolution up to 1920x1080 (the monitor's native resolution), I get a massive overscan issue. Over the years I have tried to get this to work, tinkering with my xorg.conf to death. I have also tried this on every Ubuntu since 10.04, on all the corresponding LUbuntus, and on all the Linux Mints since Lisa. Exact same issue. I have even tried it in WinDoze and it works perfectly there (although I did get the error once, but was unable to reproduce it). Using the Open Source drivers it works perfectly iff I switch off the laptop monitor (this makes no difference with the Nvidia drivers). I would have happily gone on using the Open Source drivers, except that since upgrading to LUbuntu 12.10, the Open Source drivers make my monitor completely hazy and have the same overscan issue until I (through the haze, only because I know where things are) go to the monitor settings, activate the laptop's monitor, then deactivate it, and suddenly it comes right. I have to do this every time. So I have to find a way to fix one of them, so I may as well tackle the propriety drivers, hence this overlong question. Amidst other things, I have tried the nvidia-settings, but because it is connected to an 18pin, it detects the monitor as a vga monitor and does not give me overscan correction options. I have tried custom modlines (although there are always more of those try), I have tried using xrandr, and I have tried all the FlatPanelOptions. What I have not tried is a Gentoo build, as I don't have time any more to do that installation, but up to about three years ago when I ran Gentoo exclusively I did not have this issue. Below is an link to an image with a red highlight around the portion of the screen visible to me, the numbers around it are the number of pixels which are cut off. This does seem to drift a few pixels every now and then. Thanks in advance. Nvidia driver issue image

  Read the article

• Wifi problems after upgrading to 13.10

  - by Simon

  I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

  Read the article

• Play Framework Plugin for NetBeans IDE

  - by Geertjan

  The start of minimal support for the Play Framework in NetBeans IDE 7.3 Beta would constitute (1) recognizing Play projects, (2) an action to run a Play project, and (3) classpath support. Well, most of that I've created already, as can be seen, e.g., below you can see logical views in the Projects window for Play projects (i.e., I can open all the samples that come with the Play distribution). Right-clicking a Play project lets you run it and, if the embedded browser is selected in the Options window, you can see the result in the IDE. Make a change to your code and refresh the browser, which immediately shows you your changes: What needs to be done, among other things: A wizard for creating new Play projects, i.e., it would use the Play command line to create the application and then open it in the IDE. Integration of everything available on the Play command line. Maybe the logical view, i.e., what is shown in the Projects window, should be changed. Right now, only the folders "app" and "test" are shown there, with everything else accessible in the Files window, as can be seen in the screenshot above. More work on the classpath, i.e., I've hardcoded a few things just to get things to work correctly. Options window extension to register the Play executable, instead of the current hardcoded solution. Scala integrations, i.e., investigate if/how the NetBeans Scala plugin is helpful and, if not, create different/additional solutions. E.g., the HTML templates are partly in Scala, i.e., need to embed Scala support into HTML. Hyperlinking in the "routes" file, as well as special support for the "application.conf" file. Anyone interested, especially if you're a Play fan (a "playboy"?), in joining me in working on this NetBeans plugin? I'll be uploading the sources to a java.net repository soon. It will be here, once it has been made publicly accessible: http://java.net/projects/nbplay/sources/nbplay Kind of cool detail is that the NetBeans plugin is based on Maven, which means that you could use any Maven-supporting IDE to work on this plugin.

  Read the article

• NVIDIA Additional Drivers Empty - maximum resolution 640x480 - Driver disappears

  - by Hannibal

  EDIT: Optimus card. For resolution please read this thread: "You do not appear to be using the nvidia x server"(screenshot included) And this: Ubuntu 11.10 problem with Nvidia Thanks! I know, I know yet another NVIDIA question. So I did all the research. I uninstalled and installed nvidia-settings and drivers and nvidia-current from PPE repositories which are the most updated ones. I executed nvidia-xconfig. I have two major problems. One: Additional Drivers setting is empty! It doesn't contain any driver although one is installed. I have executed apt-get update too. But still the list is empty. Two: If I execute nvidia-xconfig it will properly configure an xorg.conf file. I restart but the maximum resolution I got is 640x480. I tried the xrandr but I can't add any resolution to display LVDS1. Some weird error occurs. So I can't add a proprietary driver and I can't boot in with the xorg file created by Nvidia... What can I do? With some work ( unistall nvidia-current and install libgl1-mesa-glx I was able to activate some kind of usage of my card because the resolution got better... and I added bumbelbee to because I have multiple video cards... ) but still the list is empty. I don't know what to do at this point??!!! Also: this is the most important part. When I first installed my ubuntu yesterday 11.10 one I saw the driver!! The driver was there... And then I ofc updated every package from internet.. And after that it was gone. And I can't bring it back. So there must be something wrong with one of the updates. But which???? Thanks for any extra info you can provide! I'm really desperate to solve this issue.

  Read the article

• Automatically change resolution when not in dock

  - by jwir3

  I have Ubuntu 11.04 (yep, I know it's old news) on my Lenovo W520. At home, I have a dock with dual monitors. I have a pretty decent setup - things work almost perfectly (hence the reason I'm reluctant to upgrade... that and I'm not 100% sold on Unity). Anyway, the only annoyance I have is that when I'm on travel, I use the laptop screen. When I un-dock the laptop, I need to manually go into nvidia x-server settings and change the resolution from 'Auto' to 1920x1200, or it will think I have two screens, and my mouse pointer will be able to go way off the left side of the screen. This isn't a big deal, but I need to do it every time I restart the x-server (so if I reboot, or have to kill it, etc...) What would be really nice is if there was a way for it to automatically detect whether or not there is external monitors (which it seems to do already), and switch into the mode I select, depending on which monitors are connected. Is there any way to accomplish this? I've posted my xorg.conf file for reference. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 275.19 ([email protected]) Tue Jul 12 18:35:38 PDT 2011 #Section "Monitor" # Identifier "Monitor1" # VendorName "Lenovo" # ModelName "ThinkpadLCD" # #HorizSync 28.0 - 33.0 # #VertRefresh 43.0 - 72.0 # #Option "DPMS" #EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "DELL U2410" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-6: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-5: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+419, DFP-5: nvidia-auto-select +3840+0, DFP-6: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-5: nvidia-auto-select +0+0, DFP-6: 1920x1200 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "NoLogo" "True" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "TwinView" "1" Option "metamodes" "DFP-5: nvidia-auto-select +1920+0, DFP-6: 1920x1200 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• How to run WordPress and Java web app running on Tomcat on the same server?

  - by Chantz

  I have to run a WordPress site served via Apache2 & Java-based webapp using Tomcat on the same server. When users come to example.com or example.com/public-pages they need to served from WordPress but when they come to example.com/private-pages they need to be served from the Tomcat. I have asked this question on serverfault where they suggested using different port, different IP & sub-domain. I want to go for different port solution since it will mean I need to buy only one SSL certificate. I tried doing the reverse proxy method by having the following in my default-ssl.conf <VirtualHost _default_:443> ServerAdmin webmaster@localhost ServerName localhost:443 DocumentRoot /var/www <Directory /var/www> #For Wordpress Options FollowSymLinks AllowOverride All </Directory> <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests Off ProxyPass /private-pages ajp://localhost:8009/ ProxyPassReverse /private-pages ajp://localhost:8009/ SSLEngine on SSLProxyEngine On SSLCertificateFile /etc/apache2/ssl/apache.crt SSLCertificateKeyFile /etc/apache2/ssl/apache.key </VirtualHost> As you have noticed I am using mod_proxy_ajp in Apache2 for this. And that my Tomcat is listening to port 8009 and then serving content. So now when I go to example.com/private-pages I am seeing the content from my Tomcat. But 2 issues are happening. All my static resources are getting 404-ed, so none of my images, CSS, js are getting loaded. I see that the browser is requesting for the resources using URL example.com/css/* This will clearly not work because it translates to example.com:80/css/* instead of example.com:8009/css/* & there are no such resources in the WordPress directory. If I go to example.com/private-pages/abcd I am somehow kicked to the WordPress site (which obviously displays a 404 page). I can understand why #1 is happening but have no clue why the #2 is happening. Regardless, if there is another clean solution for resolving this, I would appreciate y'alls help.

  Read the article

• External 1TB WD USB 3.0 HDD is not detecting. Working perfectly find in Windows

  - by Yathi

  My 1TB USB 3.0 was working fine earlier in Ubuntu as well as Windows. But lately it is not at all being detected in Ubuntu. It still works fine in Windows. I did update my Ubuntu to 12.10 but I am not sure if that caused the issue. When I connect my HDD and run dmesg | tail: [ 47.804676] usb 4-3: >Device not responding to set address. [ 48.008575] usb 4-3: >Device not responding to set address. [ 48.212421] usb 4-3: >device not accepting address 9, error -71 [ 48.324451] usb 4-3: >Device not responding to set address. [ 48.528340] usb 4-3: >Device not responding to set address. [ 48.732165] usb 4-3: >device not accepting address 10, error -71 [ 48.844138] usb 4-3: >Device not responding to set address. [ 49.048179] usb 4-3: >Device not responding to set address. [ 49.251881] usb 4-3: >device not accepting address 11, error -71 [ 49.251907] hub 4-0:1.0: >unable to enumerate USB device on port 3 The output of sudo fdisk -l is : Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00030cde Device Boot Start End Blocks Id System /dev/sda1 2048 1332981759 666489856 83 Linux /dev/sda2 1332981760 1953523711 310270976 5 Extended /dev/sda5 1332983808 1349365759 8190976 82 Linux swap / Solaris /dev/sda6 1349367808 1953523711 302077952 7 HPFS/NTFS/exFAT Disk /dev/sdb: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000a2519 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 103368703 51683328 7 HPFS/NTFS/exFAT /dev/sdb2 103368704 154568703 25600000 83 Linux /dev/sdb3 154568704 234440703 39936000 7 HPFS/NTFS/exFAT /dev/sda and /dev/sdb are my 2 internal HDDs. But the external one which should be /dev/sdc is not even being shown though it is connected and the LED on the HDD is glowing. Someone had suggested adding blacklist uas to /etc/modprobe.d/blacklist.conf. Tried that as well. But still not working. Can someone help me out.

  Read the article

• AWStats is processing log files but does not display them

  - by Wouter

  I've setup AWStats on my VPS to get some more insight into the traffic coming to my site. As instructed I ran a manual build/update which ran fine: sudo -u www-data ./awstats.pl -config=xxxx.com Create/Update database for config "/etc/awstats/awstats.xxxx.com.conf" by AWStats version 6.9 (build 1.925) From data in log file "/usr/share/doc/awstats/examples/logresolvemerge.pl /var/www/xxxx.com/logs/*-access.log |"... Phase 1 : First bypass old records, searching new record... Searching new records from beginning of log file... Phase 2 : Now process new records (Flush history on disk after 20000 hosts)... Warning: awstats has detected that some hosts names were already resolved in your logfile /usr/share/doc/awstats/examples/logresolvemerge.pl /var/www/xxxx.com/logs/*-access.log |. If DNS lookup was already made by the logger (web server), you should change your setup DNSLookup=1 into DNSLookup=0 to increase awstats speed. Jumped lines in file: 0 Parsed lines in file: 814 Found 0 dropped records, Found 0 corrupted records, Found 0 old records, Found 814 new qualified records. It also produced the file in the DatDir: /var/lib/awstats/awstats052010.xxxx.com.txt which contains what I would expect. BUT when I visit: xxxx.com/awstats/awstats.pl it tells me Last Update: Never updated (See 'Build/Update' on awstats_setup.html page) and the rest of the page is blank. I'm pretty sure I set it up correctly but now I cannot figure out why this is happening. Hopefully someone smarter then me can help me. Thank you in advanced.

  Read the article

• PXE boot linux. PXE-E51: No DHCP or proxyDHCP offers were received

  - by athspk

  I am trying to have an ubuntu box (192.168.10.9) acting as a PXE server, but i have trouble getting DHCP to work. The PXE server is connected to a SOHO router (192.168.10.1) acting as a switch. I have disabled the DHCP server on the router. $ dhcpd --version isc-dhcpd-4.2.4 The contents of /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name-servers 192.168.10.1; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; allow booting; allow bootp; subnet 192.168.10.0 netmask 255.255.255.0 { range dynamic-bootp 192.168.10.101 192.168.10.200; option routers 192.168.10.1; option broadcast-address 192.168.10.255; next-server 192.168.10.9; filename "/tftpboot/pxelinux.0"; } The contents of /etc/default/isc-dhcp-server INTERFACES="eth0" When the client boots, it tries to get an IP address from the server but fails with the following Error message: PXE-E51: No DHCP or proxyDHCP offers were received. On Server side, i was tailing /var/log/syslog while the client tries to boot: Dec 4 12:57:10 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:11 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:12 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:17 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPDISCOVER from 00:1f:d0:8e:6b:db via eth0 Dec 4 12:57:25 athspk-Dell dhcpd: DHCPOFFER on 192.168.10.101 to 00:1f:d0:8e:6b:db via eth0 Please advise. Thanks in advance

  Read the article

• FTP through HAProxy

  - by Menda

  I have a machine, which is the Host and has HAProxy installed in it and working. Then I have a Guest KVM virtual machine running inside the Host with an IP 192.168.122.152. I installed an FTP server in the Guest machine with VSFTPD. From the Host, if I try the command $ ftp -p 192.168.122.152, works perfectly and I can connect to the Guest FTP. I need to remark that this FTP is configured as passive, but both passive and active connections are working from the Host. This is an extract of part of /etc/vsftpd.conf in the Guest: # Passive mode connect_from_port_20=NO tcp_wrappers=YES listen_address=192.168.122.152 pasv_enable=YES pasv_promiscuous=NO port_enable=YES port_promiscuous=NO pasv_max_port=10000 pasv_min_port=10250 Now it's time to make it accessible from outside, so I configure /etc/haproxy/haproxy.cfg like this: listen FTP_Default *:21 server ftp01 192.168.122.152 check port 21 inter 10s rise 1 fall 2 listen FTP_Range *:10000-10250 server ftp01 192.168.122.152 check port 21 inter 10s rise 1 fall 2 But if I try to connect from other machine in internet $ ftp -p $PUBLICIP, it only responds: Connected to <PUBLICIP>, but it doesn't ask for the login and password. Something in the HAProxy config must be wrong, because it's the only point where it fails. By the way, I tried to adapt my configuration to this one in this blog. Thanks.

  Read the article

• vsftpd 500 OOPS: priv_sock_get_int

  - by user1613878

  I have a problem with vsftpd that replies "500 OOPS: priv_sock_get_int" when i do command "ls". following is a snip of ftp client console running on osx. And I'm using test account that has home directory on the ftp server, not virtual account. Connected to 192.0.0.20. 220 satellite Name (192.0.0.20:john): test_account 331 Please specify the password. Password: 230 Login successful. Remote system type is UNIX. Using binary mode to transfer files. ftp> ls 500 OOPS: priv_sock_get_int 421 Service not available, remote server has closed connection. and my vsftpd.conf local_enable=YES write_enable=YES #local_umask=022 local_umask=002 #anon_upload_enable=YES #anon_mkdir_write_enable=YES #dirmessage_enable=YES #xferlog_enable=YES connect_from_port_20=YES #chown_uploads=YES #chown_username=whoever #xferlog_file=/var/log/vsftpd.log #xferlog_std_format=YES #idle_session_timeout=600 #data_connection_timeout=120 #nopriv_user=test #async_abor_enable=YES #ascii_upload_enable=YES #ascii_download_enable=YES ftpd_banner=welcome #deny_email_enable=YES #banned_email_file=/etc/vsftpd.banned_emails #chroot_local_user=YES #chroot_list_enable=YES #chroot_list_file=/etc/vsftpd.chroot_list #ls_recurse_enable=YES listen=YES #listen_ipv6=YES #ssl_enable=NO pasv_enable=YES pasv_max_port=12500 pasv_min_port=12000 port_enable=YES pasv_address=192.0.0.20 pasv_promiscuous=YES port_promiscuous=YES file_open_mode=0666

  Read the article

• cpan won't configure correctly on centos6, can't connect to internet

  - by dan

  I have Centos 6 setup and have installed perl-CPAN. When I run cpan it takes me through the setup and ends by telling me it can't connect to the internet and to enter a mirror. I enter a mirror, but it still can't install the package. What am I doing wrong? If you're accessing the net via proxies, you can specify them in the CPAN configuration or via environment variables. The variable in the $CPAN::Config takes precedence. <ftp_proxy> Your ftp_proxy? [] <http_proxy> Your http_proxy? [] <no_proxy> Your no_proxy? [] CPAN needs access to at least one CPAN mirror. As you did not allow me to connect to the internet you need to supply a valid CPAN URL now. Please enter the URL of your CPAN mirror CPAN needs access to at least one CPAN mirror. As you did not allow me to connect to the internet you need to supply a valid CPAN URL now. Please enter the URL of your CPAN mirror mirror.cc.columbia.edu::cpan Configuration does not allow connecting to the internet. Current set of CPAN URLs: mirror.cc.columbia.edu::cpan Enter another URL or RETURN to quit: [] New urllist mirror.cc.columbia.edu::cpan Please remember to call 'o conf commit' to make the config permanent! cpan shell -- CPAN exploration and modules installation (v1.9402) Enter 'h' for help. cpan[1]> install File::Stat CPAN: Storable loaded ok (v2.20) LWP not available Warning: no success downloading '/root/.cpan/sources/authors/01mailrc.txt.gz.tmp918'. Giving up on it. at /usr/share/perl5/CPAN/Index.pm line 225 ^CCaught SIGINT, trying to continue Warning: Cannot install File::Stat, don't know what it is. Try the command i /File::Stat/ to find objects with matching identifiers. cpan[2]>

  Read the article

• How can I solve http_port 3129 intercept with squid?

  - by wmoreno3

  My system: uname -a FreeBSD server.local.jmorenov.com.co 9.1-RELEASE FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012 [email protected]:/usr/obj/usr/src/sys/GENERIC amd64 pkg info | grep squid squid-3.2.7 HTTP Caching Proxy I have this configuration in squid.conf: http_port 3128 accel vhost allow-direct # OK http_port 3129 intercept # Does not work icp_port 0 When I tried with: http_port 3129 intercept By switch line on ipnat.rules. In access log appears: 2013/01/09 00:46:03 kid1| IPF (IPFilter) NAT open failed: (13) Permission denied 2013/01/09 00:46:03 kid1| BUG #3329: Orphan Comm::Connection: local=127.0.0.1:3129 remote=192.168.1.129:51595 FD 24 flags=33 2013/01/09 00:46:03 kid1| NOTE: 1 Orphans since last started. /var/log/squid/cache.log 2013/02/08 09:02:33 kid1| Squid plugin modules loaded: 0 2013/02/08 09:02:33 kid1| Accepting reverse-proxy HTTP Socket connections at local=127.0.0.1:3128 remote=[::] FD 33 flags=9 2013/02/08 09:02:33 kid1| Accepting NAT intercepted HTTP Socket connections at local=127.0.0.1:3129 remote=[::] FD 34 flags=41 My /etc/ipnat.rules: root@server:/root # cat /etc/ipnat.rules # em0 = External NIC # bge0 = Internal NIC map em0 0/0 -> 0/32 proxy port ftp ftp/tcp map em0 0/0 -> 0/32 portmap tcp/udp auto map em0 0/0 -> 0/32 # Redirect direct web traffic to local web server. rdr em0 192.168.0.3/32 port 80 -> 127.0.0.1 port 80 tcp rdr bge0 192.168.1.3/32 port 80 -> 127.0.0.1 port 80 tcp # Redirect everything else to squid on port 3128 or 3129 intercept rdr em0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3128 tcp rdr bge0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3128 tcp #rdr em0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3129 tcp #rdr bge0 0.0.0.0/0 port 80 -> 127.0.0.1 port 3129 tcp With 3128 is OK, but with 3129, Does not work, when switch in ipnat.rules.

  Read the article

• setsockopt EOPNOTSUPP (Operation not supported)

  - by brant

  When I strace my MySQL process, I keep finding the same error over and over: setsockopt(240, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) futex(0x87ab944, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x87ab940, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x87ab260, FUTEX_WAKE_PRIVATE, 1) = 1 select(13, [10 12], NULL, NULL, NULL) = 1 (in [12]) fcntl64(12, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(12, {sa_family=AF_FILE, path="\246\32629iE"...}, [2]) = 803 fcntl64(12, F_SETFL, O_RDWR) = 0 getsockname(803, {sa_family=AF_FILE, path="/var/lib/mysql\1"...}, [28]) = 0 fcntl64(803, F_SETFL, O_RDONLY) = 0 fcntl64(803, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(803, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(803, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) futex(0x87ab944, FUTEX_WAKE_OP_PRIVATE, 1, 1, 0x87ab940, {FUTEX_OP_SET, 0, FUTEX_OP_CMP_GT, 1}) = 1 futex(0x87ab260, FUTEX_WAKE_PRIVATE, 1) = 1 select(13, [10 12], NULL, NULL, NULL) = 1 (in [12]) fcntl64(12, F_SETFL, O_RDWR|O_NONBLOCK) = 0 accept(12, {sa_family=AF_FILE, path="\246\32629iE"...}, [2]) = 240 fcntl64(12, F_SETFL, O_RDWR) = 0 getsockname(240, {sa_family=AF_FILE, path="/var/lib/mysql\1"...}, [28]) = 0 fcntl64(240, F_SETFL, O_RDONLY) = 0 fcntl64(240, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(240, F_SETFL, O_RDWR|O_NONBLOCK) = 0 setsockopt(240, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) When I look for running mysql processes I don't see anything out of the ordinary. I figured it might be someplace in my code, so I modified .htaccess to spit out a 502 error to prevent it from loading anything. The error still shows up, just less frequently. There have been quite a few threads that talk about this error, but no real answer as to how to solve it. my.conf, as per request: [mysqld] #skip-networking #log-slow-queries #safe-show-database #local-infile = 0 log-slow-queries = /var/log/mysql-slow.log max_connections = 200 query_cache_limit = 128643200 key_buffer_size = 1200144000 low_priority_updates = 1 concurrent_insert = 2 thread_cache_size = 7 query_cache_size = 662144000 table_cache = 1600 table_definition_cache = 1024 long_query_time = 2.5 open_files_limit = 2647 max_connect_errors=999999999

  Read the article

• Unable to install SQL 2008 on Windows 7

  - by Axel

  SQL 2008 install hangs on Windows 7 The story: Trying to install SQL2008 on Windows 7 hangs on SqlEngineDBStartconfigAction_install_configrc_Cpu32. What I Tried: Uninstall hangs on validation Manual uninstall using msiinv.exe and msiexec /x works Added SQL service accounts to local admins no help Turn of UAC no help Last lines in setup log: 2010-04-01 16:18:05 SQLEngine: : Checking Engine checkpoint 'GetSqlServerProcessHandle' 2010-04-01 16:18:05 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' to be created 2010-04-01 16:18:07 SQLEngine: --SqlServerServiceSCM: Waiting for nt event 'Global\sqlserverRecComplete' or sql process handle to be signaled 2010-04-01 16:18:07 SQLEngine: : Checking Engine checkpoint 'WaitSqlServerStartEvents' 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize script 2010-04-01 16:18:53 Slp: Sco: Attempting to initialize default connection string 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NotSpecified 2010-04-01 16:18:53 Slp: Sco: Attempting to set script connection protocol to NamedPipes 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connection String: Data Source=\\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup 2010-04-01 16:18:53 SQLEngine: : Checking Engine checkpoint 'ServiceConfigConnect' 2010-04-01 16:18:53 SQLEngine: --SqlDatabaseServiceConfig: Connecting to SQL.... 2010-04-01 16:18:53 Slp: Sco: Attempting to connect script 2010-04-01 16:18:53 Slp: Connection string: Data Source=\\.\pipe\SQLLocal\MSSQLSERVER;Initial Catalog=master;Integrated Security=True;Pooling=False;Network Library=dbnmpntw;Application Name=SqlSetup And now comes the fun part: When I open conf mgr I can see the service running, I enabled named pipes and TCP/IP, restarted the service I'm able to connect to the server using an OLE DB connection but not with the Native Client. And what I find suspicious is the following error in my app log: .NET Runtime Optimization Service (clr_optimization_v2.0.50727_32) - Failed to compile: C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\Tools\VDT\DataProjects.dll . Error code = 0x8007000b In MS connect this is reported as a bug but MS is unable to reproduce the problem altough when you search the fora I'm not the only one with this problem. So any help is appreciated.

  Read the article

• Varnish 3.0.2 and ISPConfig 3.0.4

  - by Warren Bullock III

  I followed the tutorial The Perfect Server - Ubuntu 11.10 [ISPConfig 3] here. I'm running an Ubuntu 11.04 (Natty Narwhal) server with 1024 RAM on Rackspace. I've gone through and updated to ISPConfig 3.0.4. Everything has been working great up to now when I decided to try and install Varnish. Initially I did an install of Varnish by issuing: apt-get update apt-get upgrade apt-get install varnish Apparently the version that was installed was Varnish 2.x so I went back and added the repositories for packages provided by varnish-cache.org curl http://repo.varnish-cache.org/debian/GPG-key.txt | apt-key add - echo "deb http://repo.varnish-cache.org/ubuntu/ lucid varnish-3.0" >> /etc/apt/sources.list apt-get update apt-get install varnish This updated my version of Varnish to 3.0.2 I then proceeded to make the following changes: vim /etc/default/varnish change DAEMON_OPTS to port 80: vim /etc/apache2/ports.conf NameVirtualHost *:8000 Listen 8000 vim /etc/apache2/sites-available/default <VirtualHost *:8000> vim /etc/apache2/sites-available/ispconfig.vhost Listen 8080 NameVirtualHost *:8080 <VirtualHost _default_:8080> I then proceeded to set my other vhosts to use 8000 (the apache2 port) so with all this set I reset both Apache2 and Varnish to test. I used Firebug in Firefox 11.0 The output from what I see doesn't seem to indicate that Varnish is working completely correct: First of all I see: X-Varnish 1644834493 but I've heard that unless you have two timestamps side by side than it's probably not working correctly so for example I was thinking I might see something like: X-Varnish 1644834493 1644837493 Also if I noticed this in the output which seems to be inconstant: X-Drupal-Cache MISS There are times when it will say HIT as well.... So the question here that I have is I think Varnish is partially working, however, why don't I see two timestamps on X-Varnish like I'm thinking I should and does the output of the screenshot I have look correct? If Varnish isn't working can someone tell me what I might being doing wrong? Thanks in advance.

  Read the article

• Error when trying to start Apache after installing SSL cert

  - by chris

  I am trying to install an SSL certificate, and I get the following errors: AH02241: Init: Unable to read server certificate from file /path/my.crt SSL Library Error: error:0D0680A8:asn1 encoding routines:ASN1_CHECK_TLEN:wrong tag SSL Library Error: error:0D07803A:asn1 encoding routines:ASN1_ITEM_EX_D2I:nested asn1 error (Type=X509) AH02312: Fatal error initialising mod_ssl, exiting. Here's the process I followed: I generated my private key with: openssl genrsa -out my.key 2048 I created the CSR with: openssl req -new -key my.key -out my.csr I provided the CSR to our IT department, and they returned a crt - it starts with -----BEGIN CERTIFICATE----- My ssl.conf has (my.example.com matches the Common name used during the generation of the CSR): <VirtualHost my.example.com:443> SSLEngine On ServerName my.example.com SSLCertificateFile /path/my.crt SSLCertificateKeyFile /path/my.key </VirtualHost> I do not have SSLCertificateChainFile or SSLCACertificate file set. The private key starts with ----BEGIN RSA PRIVATE KEY----- The csr starts with -----BEGIN CERTIFICATE REQUEST----- I have verified that both: openssl rsa -noout -modulus -in my.key openssl req -noout -modulus -in my.csr produce the same output. I cannot figure out how to verify the crt - trying both x509 and rsa produce an error. Should this process have worked? Can I verify that my.crt matches the key somehow?

  Read the article

• Invalid keystore format with SSL in Tomcat 6

  - by strauberry

  I'm trying to setup SSL in my local Tomcat 6 installation. For this, I followed the official How-To doing the following: $JAVA_HOME/bin/keytool -genkey -v -keyalg RSA -alias tomcat -keypass changeit -storepass changeit $JAVA_HOME/bin/keytool -export -alias tomcat -storepass changeit -file /root/server.crt Then changing the $CATALINA_BASE/conf/server.xml, in-commenting this: <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" keystoreFile="/root/.keystore" keystorePass="changeit" /> After starting Tomcat, I get this Exception: INFO: Initializing Coyote HTTP/1.1 on http-8080 30.06.2011 10:15:24 org.apache.tomcat.util.net.jsse.JSSESocketFactory getStore SCHWERWIEGEND: Failed to load keystore type JKS with path /root/.keystore due to Invalid keystore format java.io.IOException: Invalid keystore format at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:633) at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38) at java.security.KeyStore.load(KeyStore.java:1185) When I look into the keystore with keytool -list I get root@host:~# $JAVA_HOME/bin/keytool -list Enter key store password: changeit Key store type: gkr Key store provider: GNU-CRYPTO Key store contains 1 entry(ies) Alias name: tomcat Creation timestamp: Donnerstag, 30. Juni 2011 - 10:13:40 MESZ Entry type: key-entry Certificate fingerprint (MD5): 6A:B9:...C:89:1C Obviously, the keystore types are different. How can I change the type and will this fix my problem? Thank you!

  Read the article

• Squid 2.7 Stable 8 on Windows 2008

  - by Sadish

  Hi all, I have a Windows 2008 SP2 Active Directory Domain, which has clients of Vista, Win 2000 XP and Windows 7 as members. I installed Squid 2.7 Stable 8 on Windows 2008 SP2 trying to configure NTLM based authentication when surfing Internet. Basically have defined 2 groups for internet allow and deny based on authorization Internet access is allowed. But after trying for over 3 weeks, seems that the authentication does not happen. The browser keeps on asking for user name & password. I would like to know if there is any solution for this. I’m totally frustrated and unable to move forward. My configuration as below from the modifying the default squid.conf Line 292 auth_param ntlm program c:/squid/libexec/mswin_ntlm_auth.exe auth_param ntlm children 5 Line 626 acl localnet proxy_auth REQUIRED src 10.0.0.1/255 acl InetAllow external win_domain_group InternetUsers acl InetDeny external win_domain_group InternetDenyGroup http_access allow InetAllow http_access deny InetDeny Comment any "acl localnet src" Line 294 external_acl_type win_domain_group ttl=120 %LOGIN c:/squid/libexec/mswin_check_lm_group.exe –G My Windows 2008 server is running on 192.168.0.203 and clients are of subnet 10.0.0.x for which I need authentication. Pls help !!!

  Read the article

• Problems with repositories on CentOS 3.9

  - by rodnower

  Hello, I have CentOS 3.9 for i386. When I try to instal some thing with yum, i.e: yum install firefox or yum install firefox* or yum list firefox and so on, I get: +++++++++++++++++++ yum info firefox Gathering header information file(s) from server(s) Server: CentOS-3 - Addons Server: CentOS-3 - Base Server: CentOS-3 - Extras Server: CentOS-3 - Updates Server: Jason's Utter Ramblings Repo Finding updated packages Downloading needed headers Looking in Available Packages: Looking in Installed Packages: +++++++++++++++++++ Some time ago I had CentOS 5, and I had the similar problem (exept of firefox all other packages were not installed) and I spent very much time to find different repositories and so on. Now I have CentOS 3, and there is nothing I can install with yum. This is yum.conf content: +++++++++++++++++++ [main] cachedir=/var/cache/yum debuglevel=2 logfile=/var/log/yum.log pkgpolicy=newest distroverpkg=redhat-release installonlypkgs=kernel kernel-smp kernel-hugemem kernel-enterprise kernel-debug kernel-unsupported kernel-smp-unsupported kernel-hugemem-unsupported tolerant=1 exactarch=1 [utterramblings] name=Jason's Utter Ramblings Repo baseurl=http://www.jasonlitka.com/media/EL4/i386/ [base] name=CentOS-$releasever - Base baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/ #released updates [update] name=CentOS-$releasever - Updates baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/ #packages used/produced in the build but not released [addons] name=CentOS-$releasever - Addons baseurl=http://mirror.centos.org/centos/$releasever/addons/$basearch/ #additional packages that may be useful [extras] name=CentOS-$releasever - Extras baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/ #[centosplus] #name=CentOS-$releasever - Plus #baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/ #[testing] #name=CentOS-$releasever - Testing #baseurl=http://mirror.centos.org/centos/$releasever/testing/$basearch/ #[fasttrack] #name=CentOS-$releasever - Fasttrack #baseurl=http://mirror.centos.org/centos/$releasever/fasttrack/$basearch/ +++++++++++++++++++ The file is too long, so I littely edited it. So my question is: is there some "normal" one repository that have all basic thing like firefox and so that I will insert to this file and all will work fine? Thank you very much for ahead.

  Read the article

• NetApp FAS 2040 LDAP Win2k8R2

  - by it_stuck

  I am trying to get my FAS2040 to action user lookups using LDAP, below is the filer configuration options: filer> options ldap ldap.ADdomain dc1.colour.domain.local ldap.base OU=Users,OU=something1,OU=something2,OU=darkside,DC=colour,DC=domain,DC=local ldap.base.group ldap.base.netgroup ldap.base.passwd ldap.enable on ldap.minimum_bind_level anonymous ldap.name domain-admin-account ldap.nssmap.attribute.gecos gecos ldap.nssmap.attribute.gidNumber gidNumber ldap.nssmap.attribute.groupname cn ldap.nssmap.attribute.homeDirectory homeDirectory ldap.nssmap.attribute.loginShell loginShell ldap.nssmap.attribute.memberNisNetgroup memberNisNetgroup ldap.nssmap.attribute.memberUid memberUid ldap.nssmap.attribute.netgroupname cn ldap.nssmap.attribute.nisNetgroupTriple nisNetgroupTriple ldap.nssmap.attribute.uid uid ldap.nssmap.attribute.uidNumber uidNumber ldap.nssmap.attribute.userPassword userPassword ldap.nssmap.objectClass.nisNetgroup nisNetgroup ldap.nssmap.objectClass.posixAccount posixAccount ldap.nssmap.objectClass.posixGroup posixGroup ldap.passwd ****** ldap.port 389 ldap.servers ldap.servers.preferred ldap.ssl.enable off ldap.timeout 20 ldap.usermap.attribute.unixaccount unixaccount ldap.usermap.attribute.windowsaccount sAMAccountName ldap.usermap.base ldap.usermap.enable on output of nsswitch.conf: hosts: files dns passwd: ldap files netgroup: ldap files group: ldap files shadow: files nis Error Message(s): [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Starting AD LDAP server address discovery for dc1.colour.domain.LOCAL. [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using DNS site query (site). [filer: auth.ldap.trace.LDAPConnection.statusMsg:info]: AUTH: TraceLDAPServer- Found no AD LDAP server addresses using generic DNS query. Could not get passwd entry for name = <random user> the filer can ping the FQDN of dc1 the filer can ping the IP of dc1 the filer cannot ping "dc1" I'm not sure where I'm going wrong, so any pointers would be great.

  Read the article

• uWSGI log file...permission denied to read file

  - by bkev

  I have a server running Django/Nginx/uWSGI with uWSGI in emperor mode, and the error log for it (the vassal-level error log, not the emperor-level log) has a continual permissions error every time it spawns a new worker, like so: Tue Jun 26 19:34:55 2012 - Respawned uWSGI worker 2 (new pid: 9334) Error opening file for reading: Permission denied Problem is, I don't know what file it's having trouble opening; it's not the log file, obviously, since I'm looking at it and it's writing to that without issue. Any way to find out? I'm running the apt-get version of uWSGI 1.0.3-debian through Upstart on Ubuntu 12.04. The site is working successfully, aside from what seems like a memory leak...hence my looking at the log file. My Upstart conf file description "uWSGI" start on runlevel [2345] stop on runlevel [06] respawn env UWSGI=/usr/bin/uwsgi env LOGTO=/var/log/uwsgi/emperor.log exec $UWSGI \ --master \ --emperor /etc/uwsgi/vassals \ --die-on-term \ --auto-procname \ --no-orphans \ --logto $LOGTO \ --logdate My Vassal ini file: [uwsgi] # Variables base = /srv/env/mysiteenv # Generic Config uid = uwsgi gid = uwsgi socket = 127.0.0.1:5050 master = true processes = 2 reload-on-as = 128 harakiri = 60 harakiri-verbose = true auto-procname = true plugins = http,python cache = 2000 home = %(base) pythonpath = %(base)/mysite module = wsgi logto = /srv/log/mysite/uwsgi_error.log logdate = true

  Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >