Search Results

Search found 4528 results on 182 pages for 'touch'.

Page 151/182 | < Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >

  • Brightness Crash and Fan issues in 12.04.1

    - by S.A. McIntosh
    I would just like to state beforehand that I am a total novice in using Ubuntu when it comes to the more complex issues. So I thought it would be best to finally come here and ask for help before being re-directed or closed out for a solution. I have already looked high and low on this board for one but nothing came up for my particular case, so I might as well take a shot asking for the first time here. This is what I have at the moment: -Dell Insprion 1764 w/ 64-bit Intel i5 Core -Dual Boot: Windows 7/Ubuntu 12.04.1 32-bit (from 12.04 install) -Unity shell -Linux kernel: 3.2.0-32 generic-pae ...and this is my fglrxinfo: OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 5000 Series OpenGL version string: 4.2.11627 Compatibility Profile Context The one issue I have with using Ubuntu is brightness. With the driver in every time I use the slider in the brightness and lock settings or use the keyboard function, it freezes, goes black and comes up with a scrambled colors page like this in the video. So I have looked all over this board and the web for answers looking for a solution that might have an answer. This is what I have done so far to fix this: -First Solution: Looking around, I found this small fix using terminal: sudo gedit /etc/rc.local followed by adding this into "rc.local" echo # > /sys/class/backlight/acpi_video0/brightness This works rarely with the graphics driver still in and I often get lucky say during restart but reboot would only snap back the brightness at max. -Second Solution Simply remove the graphics driver while leaving the solution of first behind. This solves the issue but results in having the monitor flicker and flash at startup which in itself is not a problem to me but maybe not so good for monitor health. Also it causes the fan to speed up throughout the session and render any program that needs the driver useless. -Third Solution This is the most obvious. Just simply use the brightness on AMD Catalyst Control Center software that came with the driver, and I can say that it's form of brightness is HORRIBLE compared to the actual settings. Which leads up to where I am now, back to the driver to stop the fan speed-up and seems that the only solution to the brightness crash is to use the keyboard-controlled brightness at the login screen NOT the desktop if I want the issued effect but will just snap at max bright again if I restart. Fan speed problem is dealt with but now run the risk of crashing my computer if I so much touch the brightness settings. Speaking of which I found this on launchpad and it seems that the issue has been going far since June of 2012. Any help, redirect link or reference would be greatly appreciated. Thank you.

    Read the article

  • Desktop Fun: Runic Style Fonts

    - by Asian Angel
    Most of the time regular fonts are just what you need for documents, invitations, or adding text to images. But what if you are in the mood for something unusual or unique to add that perfect touch? If you like older runic style writing, then enjoy finding some new favorites for your collection with our Runic Style Fonts collection. Temple photo by ShinyShiny. Note: To manage the fonts on your Windows 7, Vista, & XP systems see our article here. The Runic Style Fonts Sable Download Worn Manuscript Download JSL Ancient Download Antropos Download Cave Gyrl Download The Roman Runes Alliance Download Ancient Geek Download Troll Download Runish Quill MK *includes two font types Download DS RUNEnglish 2 Download Runes Written *includes two font types Download Wolves And Ravens Download Art Greco Download Dalek Download Glagolitic AOE Download Linear B Download Cartouche Download Greywolf Glyphs *includes 62 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Note: This group represents the numbers 0 – 9. Download Africain *includes 62 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Note: This group represents the numbers 0 – 9. Download Cave Writings *includes 52 individual characters Note: This group represents A – Z in all capital letters. Note: This group represents A – Z in all lower case letters. Download For more great ways to customize your computer be certain to look through our Desktop Fun section. Latest Features How-To Geek ETC HTG Projects: How to Create Your Own Custom Papercraft Toy How to Combine Rescue Disks to Create the Ultimate Windows Repair Disk What is Camera Raw, and Why Would a Professional Prefer it to JPG? The How-To Geek Guide to Audio Editing: The Basics How To Boot 10 Different Live CDs From 1 USB Flash Drive The 20 Best How-To Geek Linux Articles of 2010 Five Sleek Audi R8 Car Themes for Chrome and Iron MS Notepad Replacement Metapad Returns with a New Beta Version Spybot Search and Destroy Now Available as a Portable App (PortableApps.com) ShapeShifter: What Are Dreams? [Video] This Computer Runs on Geek Power Wallpaper Bones, Clocks, and Counters; A Look at the First 35,000 Years of Computing

    Read the article

  • Play a Webpage Display Prank in Google Chrome

    - by Asian Angel
    Are you looking for a fun but innocent prank to play on someone who loves using Google Chrome? If so then you may want to have a closer look at the Upside Down extension for Chrome. Before Here is our example webpage before starting the prank…looking all “normal like”. Upside Down in Action As soon as the extension has been installed you are ready to go. If you had a webpage open before installing the extension you will only need to refresh the page. As soon as the page has been refreshed or a new one is opened everything is going to look messed up very quickly. With the default setting there are five different “looks” available. To cycle through the five “looks” use the “Windows Key + Semicolon” or “Command + Semicolon” to toggle through them. On the sixth toggle the webpage will revert to normal (toggling afterwards starts the whole process again). Here are the five “looks” available…         Options There are options available for the extension where you can focus on just a specific effect or a group of effects. You can also enable a “Grayscale Effect” and even set a delay timer (a definite “evil touch”)! Think of the fun and surprised looks that await… Conclusion If you have been looking for a fun and unexpected prank for your favorite Google Chrome fan then this just might be what you have been looking for. Get ready to sit back and watch the fun. Links Download the Upside Down extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Take Screenshots of Any Webpage in Google ChromeHow to Make Google Chrome Your Default BrowserSubscribe to RSS Feeds in Chrome with a Single ClickActivate the Redesigned New-Tab Interface in Google ChromeFriday Fun: Play MineSweeper in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If Web Browsers Were Modes of Transportation Google Translate (for animals) Out of 100 Tweeters Roadkill’s Scan Port scans for open ports Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows

    Read the article

  • Dynamic character animation - Using the physics engine or not

    - by Lex Webb
    I'm planning on building a dynamic reactant animation engine for the characters in my 2D Game. I have already built templates for a skeleton based animation system using key frames and interpolation to specify a limbs position at any given moment in time. I am using Farseer physics (an extension of Box2D) in Monogame/XNA in C# My real question lies in how i go about tying this character animation into the physics engine. I have two options: Moving limbs using physics engine - applying a interpolated force to each limb (dynamic body) in order to attempt to get it to its position as donated by the skeleton animation. Moving limbs by simply changing the position of a fixed body - Updating the new position of each limb manually, attempting to take into account physics collisions. Then stepping the physics after the animation to allow for environment interaction. Each of these methods have their distinct advantages and disadvantages. Physics based movement Advantages: Possibly more natural/realistic movement Better interaction with game objects as force applying to objects colliding with characters would be calculated for me. No need to convert to dynamic bodies when reacting to projectiles/death/fighting. Disadvantages: Possible difficulty in calculating correct amount of force to move a limb a certain distance at a constant rate. Underlying character balance system would need to be created that would need to be robust enough to prevent characters falling over at the touch of a feather. Added code complexity and processing time for the above. Static Object movement Advantages: Easy to interpolate movement of limbs between game steps Moving limbs is as simple as applying a rotation to the skeleton bone. Greater control over limbs, wont need to worry about characters falling over as all animation would be pre-defined. Disadvantages: Possible unnatural movement (Depends entirely on my animation skills!) Bad physics collision reactions with physics engine (Dynamic bodies simply slide out of the way of static objects) Need to calculate collisions with physics objects and my limbs myself and apply directional forces to them. Hard to account for slopes/stairs/non standard planes when animating walking/running animations. Need to convert objects to dynamic when reacting to projectile/fighting/death physics objects. The Question! As you can see, i have thought about this extensively, i have also had Google into physics based animation and have found mostly dissertation papers! Which is filling me with sense that it may a lot more advanced than my mathematics skills. My question is mostly subjective based on my findings above/any experience you may have: Which of the above methods should i use when creating my game? I am willing to spend the time to get a physics solution working if you think it would be possible. In the end i want to provide the most satisfying experience for the gamer, as well as a robust and dynamic system i can use to animate pretty much anything i need.

    Read the article

  • Code Analysis Rule Sets in Visual Studio 2010

    - by Anthony Trudeau
    Microsoft Visual Studio 2010 introduces the concept of rule sets when configuring code analysis.  This is a valuable change from Visual Studio 2008 that I didn't even realize I wanted.  Visual Studio 2008 by default selected all rules and then you had to remove rules on an item by item basis. The rule sets fall into logical groups including "Microsoft All Rules", "Microsoft Basic Correctness Rules", "Microsoft Security Rules", et al.  And within the project properties you can select one rule set, multiple rule sets, or you can define your own rule set based upon another. Selecting a single rule set is obviously the easiest option.  The default rule set when you create a new project is the "Microsoft Minimum Recommended Rules".  However, in my opinion the recommended rules are just too permissive.  For that reason you might want to change your rule set to "Microsoft All Rules" until you get around to creating your own rule set; or alternately you can select multiple rule sets which is an option from the rule set combo box.  The Visual Studio documentation has comprehensive help on what is contained within the rule sets. Creating your own rule set is easy if not obvious.  You need to start a rule set from an existing rule set.  To get started select a rule set in the combo box within the Code Analysis tab of the project properties.  I selected the "Microsoft All Rules" for my rule set, but you may find it easier to start with the "Microsoft Minimum Recommended Rules" if your rules are on the more permissive side. Once your rule set is selected click the Open button.  This will display a dialog that is similar in composition to the rules selection from Visual Studio 2008.  Browsing through the tree view you can select or deselect individual rules within their categories; and you can indicate that the rules are flagged as errors instead of the default which is a warning.  A nice touch to the form is that you get a help pane when you select an individual rule.  That helped me considerably when I first configured my rule set. Once you have finished selecting your rules click the Save tool button, specify a location and name, and click the Save button on the Save As dialog.  Once you're back on the Code Analysis tab you'll choose the Browse option within the combo box and open the file you just created.

    Read the article

  • Don't Miss At Devoxx!!!

    - by Yolande Poirier
    Come by IoT Hack Fest which starts with the session: kickstart your Raspberry Pi and/or Leap Motion project, part II on Tuesday from 9:30am to 12:00pm to learn how to start a project with the Raspberry Pi and Leap Motion. In the afternoon, you can still join a project and create your own project with the help of experts on Raspberry Pi, Leap Motion and other boards.  At the Oracle booth, Java experts will be available  to answer your  questions and demo the new features of the Java Platform, including Java Embedded, JavaFX, Java SE and Java EE. This year, the chess game that was first demoed at JavaOne keynotes last September will be showcased at Devoxx.  Duke is coming to Devoxx this year. You can get your picture taken with Duke on Tuesday, Wednesday and Thursday (Nov. 12-14) from 12:00 to 18:00 Beer bash will be Tuesday from 17:30-19:30 and Wednesday/Thursday from 18:00 to 20:00 at the booth. Oracle is raffling off five Raspberry Pi's and a number of books every day. Make sure to stop by and get your badge scanned to enter the raffle. Raffles are Tuesday at 19:15 and Wednesday/Thursday at 19:45 at the Oracle booth.  The main conference sessions from Oracle Java experts are:  Wednesday 13 November Beyond Beauty: JavaFX, Parallax, Touch, Raspberry Pi, Gyroscopes, and Much More Angela Caicedo, Senior Member, Technical Staff, Oracle Room 7, 12:00–13:00 Lambda: A Peek Under the Hood, Brian Goetz, Software Architect, Oracle Room 8, 12:00–13:00 In Full Flow: Java 8 Lambdas in the Stream, Paul Sandoz, Software Developer, Oracle Room 8, 14:00–15:00 The Modular Java Platform and Project Jigsaw, Mark Reinhold, Chief Architect, Java Platform Group, Oracle, Room 8, 15:10–16:10 The Curious Case of JavaScript on the JVM, Attila Szegedi, Principal Member, Technical Staff, Oracle, Room 5, 16:40–17:40 Is It a Car? Is It a Computer? No, It’s a Raspberry Pi JavaFX Informatics System. Simon Ritter, Principal Technology Evangelist, Oracle Room 7, 16:40–17:40 Thursday 14 November Java EE 7: What’s New in the Java EE Platform Linda DeMichiel, Consulting Member, Technical Staff, Oracle, Room 8, 10:50–11:50 Java Microbenchmark Harness: The Lesser of the Two Evils, Aleksey Shipilev, Principal Member, Technical Staff, Oracle. Room 6, 14:00–15:00 Practical Restful Persistence, Shaun Smith, Senior Principal Product Manager, Oracle Room 8, 17:50–18:50 Friday 15 November Avatar.js, Server-Side JavaScript on the Java Platform, Jean-Francois Denise, Software Developer, Oracle Room 8, 11:50–12:50

    Read the article

  • Wordpress Installation (on IIS and SQL Server)

    - by Davide Mauri
    To proceed with the installation of Wordpress on SQL Server and IIS, first of all, you need to do the following steps Create a database on SQL Server that will be used by Wordpress Create login that can access to the just created database and put the user into ddladmin, db_datareader, db_datawriter roles Download and unpack Wordpress 3.3.2 (latest version as of 27 May 2012) zip file into a directory of your choice Download the wp-db-abstraction 1.1.4 (latest version as of 27 May 2012) plugin from wordpress.org website Now that the basic action has been done, you can start to setup and configure your Wordpress installation. Unpack and follow the instructions in the README.TXT file to install the Database Abstraction Layer. Mainly you have to: Upload wp-db-abstraction.php and the wp-db-abstraction directory to wp-content/mu-plugins.  This should be parallel to your regular plugins directory.  If the mu-plugins directory does not exist, you must create it. Put the db.php file from inside the wp-db-abstraction.php directory to wp-content/db.php Now you can create an application pool in IIS like the following one Create a website, using the above Application Pool, that points to the folder where you unpacked Wordpress files. Be sure to give the “Write” permission to the IIS account, as pointed out in this (old, but still quite valid) installation manual: http://wordpress.visitmix.com/development/installing-wordpress-on-sql-server#iis Now you’re ready to go. Point your browser to the configured website and the Wordpress installation screen will be there for you. When you’re requested to enter information to connect to MySQL database, simply skip that page, leaving the default values. If you have installed the Database Abstraction Layer, another database installation screen will appear after the one used by MySQL, and here you can enter the configuration information needed to connect to SQL Server. After having finished the installation steps, you should be able to access and navigate your wordpress site.  A final touch, and it’s done: just add the needed rewrite rules http://wordpress.visitmix.com/development/installing-wordpress-on-sql-server#urlrewrite and that’s it! Well. Not really. Unfortunately the current (as of 27 May 2012) version of the Database Abstraction Layer (1.1.4) has some bugs. Luckily they can be quickly fixed: Backslash Fix http://wordpress.org/support/topic/plugin-wp-db-abstraction-fix-problems-with-backslash-usage Select Top 0 Fix Make the change to the file “.\wp-content\mu-plugins\wp-db-abstraction\translations\sqlsrv\translations.php” suggested by “debettap”   http://sourceforge.net/tracker/?func=detail&aid=3485384&group_id=315685&atid=1328061 And now you have a 100% working Wordpress installation on SQL Server! Since I also wanted to take advantage of SQL Server Full Text Search, I’ve created a very simple wordpress plugin to setup full-text search and to use it as website search engine: http://wpfts.codeplex.com/ Enjoy!

    Read the article

  • Tales of a corrupt SQL log

    - by guybarrette
    Warning: I’m a simple dev, not an all powerful DBA with godly powers. This morning, one of my sites was down and DNN reported a problem with the database.  A quick series of tests revealed that the culprit was a corrupted log file. Easy fix I said, I have daily backups so it’s just a mater of restoring a good copy of the database and log files.  Well, I found out that’s not exactly true.  You see, for this database, I have daily file backups and these are not database backups created by SQL Server. So I restored a set of files from a couple of days ago, stopped the SQL service, copied the files over the bad ones, restarted the service only to find out that SQL doesn’t like when you do that.  It suspects something fishy and marks the database as suspect.  A database marked as suspect can’t be accessed at all.  So now what? I searched throughout the tubes of the InterWeb and found that you can restore from a corrupted log file by creating a new database with the same name as the defective one, then copy the restored database file (the one with data) over the newly created one.  Sweet!  But you still end up with SQL marking the database as suspect but at least, the newly created log is OK.  Well not true, it’s not corrupted but the lack of data makes it not OK for SQL so you need to rebuild the log.  How can you do that when SQL blocks any action the database?  First, you need to change the database status from suspect to emergency.  Then you need to set the database for single access only.  After that, you need to repair the log with DBCC and do the DBA dance.  If you dance long enough, SQL should repair the log file.  Now you need to set the access back to multi user.  Here’s the T-SQL script: use master GO EXEC sp_resetstatus 'MyDatabase' ALTER DATABASE MyDatabase SET EMERGENCY Alter database MyDatabase set Single_User DBCC checkdb('MyDatabase') ALTER DATABASE MyDatabase SET SINGLE_USER WITH ROLLBACK IMMEDIATE DBCC CheckDB ('MyDatabase', REPAIR_ALLOW_DATA_LOSS) ALTER DATABASE MyDatabase SET MULTI_USER So I guess that I would have been a lot easier to restore a SQL backup.  I can’t really say but the InterWeb seems to say so.  Anyway, lessons learned: Vive la différence: File backups are different then SQL backups. Don’t touch me: SQL doesn’t like when you restore a file over a corrupted one. The more the merrier: You should do both SQL and file backups. WTF?: The InterWeb provides you with dozens of way to deal with the problem but many are SQL 2000 or SQL 2005 only, many are confusing and many are written in strange dialects only DBAs understand. var addthis_pub="guybarrette";

    Read the article

  • BPM 11g Customer Stories & Solution Catalog & Process Accelerators

    - by JuergenKress
    Stories Everyone loves a good story on planning or implementing a BPM strategy. Everyone wants to hear how it was done before?, what worked?, what was achieved? If you have achieved success with BPM, we are very keen to hear your stories and examples of how your customers use it. We receive lots of requests from people who are thinking of using BPM to solve a specific problem or in combination with a specific technology to talk to someone who has done it before. These stories are invaluable. Drop down the details of anything you think is relevant with a bit of detail and we will follow up on it. As one good deed deserves another, we will do our best to give you stories if you need them to show that where you are going, others have treaded before. Send your stories to us using this e-mail link and we will share them among other like minded people. Solution Catalogue This summer, Oracle is launching a solution catalogue specifically intended for partners. If you have delivered a successful implementation in BPM and think it could be reused and applied again in a similar scenario in the same industry or in a similar environment, then we ware keen to know about it and will add it to the solution catalogue. The solution catalogue will showcase successful BPM solutions both inside and outside Oracle. Be in touch with us on this e-mail link and we will make sure to add your solution. Process Accelerators Finally if you have specific processes that you are expert on, you have implemented at a customer and you want to work with us on getting these productised, then we would love to know about it. The process accelerator programme is explained in the most recent SOA/BPM Community Newsletter but again feel free to contact us if you want to get involved. Good luck with BPM and let us know how we can help. Barry O'Reilly Director BPM Solutions [email protected] SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: BPM,Barry O Reilly,SOA Community,Oracle SOA,Oracle BPM,BPM Community,OPN,Jürgen Kress

    Read the article

  • How to fix 'grub error file not found' when installing 12.04?

    - by Tomasz Grabowski
    i'm trying to install Ubuntu. I don't know if it is important, but i'm trying to install it on external HDD. In the end i have external bootable HDD which only displays: error: file not found grub recovery> From the beginning: I've downloaded ubuntu-12.04-desktop-i386.iso I've used LiLi USB Creator (LinuxLive) to create bootable pendrive from that image I've bootet from it, it works I've clicked "Try ubuntu", it works too. I've used GParted to look over drivers (disks) My primary embedded disk is seen as /dev/sda My attached external disk as /dev/sdb My PenDrive as /dev/sdc I've created partitions on /dev/sdb Fist partition for system (over 200GiB) Second was there already (it's xsf, and i don't want to touch it :P) Third is extended partition, with 1 locital partiton (10GiB) for swap I've started installation i've choose "somethin else" in ... i belive secound screeb then is selected /dev/sdb as boot disk for first partiton of /dev/sdb i set i want ext3 file system, i've check "formattin" checkbox, and mount path set to "/" firs logical partiton set as swap partition After installation finished, i restarted my computer. When i boot from my primary disc it's work ok, my previous operating system - vista - works ok. When i set my BIOS to boot from my external disc, i only get that message: error: file not found grub recovery> I've try to reinstall it, but didn't help... In desperation, i've try to read a bit about that "grub recovery" command-line and experiment a bit... I'm not sure if this has had any point, or if it give you some information (notice, that i don't know what i'm doing :P ) when i've type command: insmod (hd1,1)/boot/grub/linux.mod i've get message: unknown filesystem the same with: insmod (hd1,msdos1)/boot/grub/linux.mod the same with: insmod ext3 but i get no message after command: insmod ext2 ... notice that i really don't know what this command exactly do, but than i thought that maybe if i reinstall ubuntu with ext2 filesystem, it will work. I've done that, but symptoms are the same. I've go back to that Live version of ubuntu, filesystem and basics directories seems to be present on /dev/sdb1 ... i'm completely unfamiliar with GRUB. I'm also don't know which wersion of GRUB it is, i hope there is only one version on ubuntu-12.04-desktop-i386.iso Any help? Thax

    Read the article

  • Help needed with pyparsing [closed]

    - by Zearin
    Overview So, I’m in the middle of refactoring a project, and I’m separating out a bunch of parsing code. The code I’m concerned with is pyparsing. I have a very poor understanding of pyparsing, even after spending a lot of time reading through the official documentation. I’m having trouble because (1) pyparsing takes a (deliberately) unorthodox approach to parsing, and (2) I’m working on code I didn’t write, with poor comments, and a non-elementary set of existing grammars. (I can’t get in touch with the original author, either.) Failing Test I’m using PyVows to test my code. One of my tests is as follows (I think this is clear even if you’re unfamiliar with PyVows; let me know if it isn’t): def test_multiline_command_ends(self, topic): output = parsed_input('multiline command ends\n\n',topic) expect(output).to_equal( r'''['multiline', 'command ends', '\n', '\n'] - args: command ends - multiline_command: multiline - statement: ['multiline', 'command ends', '\n', '\n'] - args: command ends - multiline_command: multiline - terminator: ['\n', '\n'] - terminator: ['\n', '\n']''') But when I run the test, I get the following in the terminal: Failed Test Results Expected topic("['multiline', 'command ends']\n- args: command ends\n- command: multiline\n- statement: ['multiline', 'command ends']\n - args: command ends\n - command: multiline") to equal "['multiline', 'command ends', '\\n', '\\n']\n- args: command ends\n- multiline_command: multiline\n- statement: ['multiline', 'command ends', '\\n', '\\n']\n - args: command ends\n - multiline_command: multiline\n - terminator: ['\\n', '\\n']\n- terminator: ['\\n', '\\n']" Note: Since the output is to a Terminal, the expected output (the second one) has extra backslashes. This is normal. The test ran without issue before this piece of refactoring began. Expected Behavior The first line of output should match the second, but it doesn’t. Specifically, it’s not including the two newline characters in that first list object. So I’m getting this: "['multiline', 'command ends']\n- args: command ends\n- command: multiline\n- statement: ['multiline', 'command ends']\n - args: command ends\n - command: multiline" When I should be getting this: "['multiline', 'command ends', '\\n', '\\n']\n- args: command ends\n- multiline_command: multiline\n- statement: ['multiline', 'command ends', '\\n', '\\n']\n - args: command ends\n - multiline_command: multiline\n - terminator: ['\\n', '\\n']\n- terminator: ['\\n', '\\n']" Earlier in the code, there is also this statement: pyparsing.ParserElement.setDefaultWhitespaceChars(' \t') …Which I think should prevent exactly this kind of error. But I’m not sure. Even if the problem can’t be identified with certainty, simply narrowing down where the problem is would be a HUGE help. Please let me know how I might take a step or two towards fixing this.

    Read the article

  • Developing for Windows CE platform?

    - by grmbl
    I'm looking in creating some applications for workers to use on the workfloor. They'll be using Psion NEO devices running Windows CE 5.0. My skillset allows for C#, PHP, ASP.Net (+ webservices). Application requirements: should connect to our ERP system running on IBM iSeries (AS400). should be run in fullscreen (effectively hiding the OS). usability touch functionality. I have tried the following: Full winform application ran through RDP session: [+] easy deployment using .rdp file. [+] application can be run on desktop environment too. [+] rdp host can easily access DB2 using IBM drivers. [+] GUI works ok on small screen. [-] environment = terminal server. (which is already under heavy use) Full winform application running on device OS: [+] environment = local. [+] responsive. [-] must use a webservice to access DB2. [-] deployment... [-] fixed platform (no desktop) Console application running on device OS: [+] environment = local. [+] very responsive. [-] must use a webservice to access DB2. [-] no fullscreen or other window options? [-] deployment... [-] fixed platform (no desktop) I'm considering creating a web application but it seems the OS comes with IE 5? I don't want to alter the OS in any way! (install other browsers etc.) I would like to have an application that's responsive, easy to deploy, fullscreen and optionally multiplatform. I have seen handheld devices using terminal (emulation?) with a console like interface. This seems to be native to the device but I'm afraid this requires modest knowledge of C++? It seems that using RDP is the way to go but, I came here for advice and look for people that have been in the same situation willing to share their experience. There does not seem to be many "best practices" on the web that could help me decide the best way of working. Greetings

    Read the article

  • Will HTML5 make Silverlight redundant?

    - by Laila
    One of the great features of Adobe AIR v2 that was launched this month was its support for some of the 2008 draft of HTML5. The HTML5 specification was started in 2004, but the full spec will probably not be approved by W3C until around 2022. One might have thought that it would take years yet from now to reach the point where any browsers were remotely HTML5-compliant, but enough of HTML5 is published and agreed to make a lot of it possible, and Safari and Adobe have got there thanks to Apple's open-source WebKit. The race for HTML 5 has been fuelled by the demand by Apple and Google for advanced graphics, typography, animations and transitions without having to rely on third party browser plug-ins such as Adobe Flash or Silverlight. There is good reason for this haste: Flash doesn't support touch-devices and has been slow in supporting hardware video decoders such as H.264. There is a strong requirement to do all that Flash can do in an open-standards way. Those with proprietary solutions remain sniffy. In AIR 2, Adobe pointedly disables the HTML5 and tags that allow basic playing of media content, saying that the specification is not final and there is still no standard for the supported formats, and adding that Safari implements a 'disjoint set' of codecs. Microsoft also has little interest in HTML 5 as it has so much invested in Silverlight. Google stands to gain by the Adobe AIR for Android as it will allow a lot of applications to be migrated easily to the platform, so sees Apple's war on Flash as a way of gaining market share. Why do we care? It is because HTML5/CSS3 provides facilities much far beyond HTML4, bring the reality of browser-based applications a lot closer. Probably most generally useful is the advanced typography: Safari and AIR already both support a way of reflowing text in a container across an arbitrary number of columns; Page-specific fonts can also be specified. Then there is 2D drawing, video, transitions, local storage, AJAX navigation and mutable DOM prototypes. HTML5 is likely to provide base functionality that is required but it is too early to be certain that it will render Flash, Silverlight or JavaFX obsolete. In the meantime, Adobe Air provides the best vehicle for developing HTML5/CSS3 applications without a twinge of worry about browser incompatibilities. Cheers, Laila

    Read the article

  • Tools for Enterprise Architects: OmniGraffle for iPad?

    - by pat.shepherd
    Well, I have to admit to being a bit of an Apple fan and, of course, and early adopter of gadgets and technology in general.  So, when FedEx showed up with my iPad 3G last week, I was a kid in a candy store.  One of the apps that my “buy finger” was hovering over for a while (like all of 3 days) was Omnigraffle for the iPad.  I imagined that it would be very cool to use this with a customer’s EA’s to sketch out Business, Application, Information and Technology architectures.  Instead of using the blackboard, this seemed to offer promise as a white-boarding tool with obvious benefits over a traditional white-board.  I figured I’d get a VGA adapter, plug it into the customer’s projector and off we would go with a great JAD tool.  The touch pad approach offered an additional hands-on kind of feel. So, I made the $49.99 purchase + the $29.99 VGA adapter and tried to give it a go.  Well, I was both pleasantly and unpleasantly surprised.  It is both powerful and easy to use.  There are great stencils included for shapes, software icons, Visio shapes, and even UML notation.  There is even a free-hand tool that works well.  I created some diagrams pretty quickly.   The one below was just a test and took all of 10 minuets to do. The only problem was that Onmigraffle does not recognize the VGA output, so I was stopped dead in my tracks, as it were.  My use case was as a collaborative diagramming tool with other architects, though I can still use it off line.  I called Omnigraffle and they said that VGA support is on the feature request list so, hopefully, in a short amount of time, I can use the tool as I envisioned.   Review: Criteria Result Is it fun? Yes Is it Useful? Yes Does it Show Promise? Yes Did the VGA Output Work? No File/diagram Formats PDF, Onmigraffle proprietary, image   Quick Sample:     OmniGraffle for iPad - Products - The Omni Group

    Read the article

  • How to Make Objects Fall Faster in a Physics Simulation

    - by David Dimalanta
    I used the collision physics (i.e. Box2d, Physics Body Editor) and implemented onto the java code. I'm trying to make the fall speed higher according to the examples: It falls slower if light object (i.e. feather). It falls faster depending on the object (i.e. pebble, rock, car). I decided to double its falling speed for more excitement. I tried adding the mass but the speed of falling is constant instead of gaining more speed. check my code that something I put under input processor's touchUp() return method under same roof of the class that implements InputProcessor and Screen: @Override public boolean touchUp(int screenX, int screenY, int pointer, int button) { // TODO Touch Up Event if(is_Next_Fruit_Touched) { BodyEditorLoader Fruit_Loader = new BodyEditorLoader(Gdx.files.internal("Shape_Physics/Fruity Physics.json")); Fruit_BD.type = BodyType.DynamicBody; Fruit_BD.position.set(x, y); FixtureDef Fruit_FD = new FixtureDef(); // --> Allows you to make the object's physics. Fruit_FD.density = 1.0f; Fruit_FD.friction = 0.7f; Fruit_FD.restitution = 0.2f; MassData mass = new MassData(); mass.mass = 5f; Fruit_Body[n] = world.createBody(Fruit_BD); Fruit_Body[n].setActive(true); // --> Let your dragon fall. Fruit_Body[n].setMassData(mass); Fruit_Body[n].setGravityScale(1.0f); System.out.println("Eggs... " + n); Fruit_Loader.attachFixture(Fruit_Body[n], Body, Fruit_FD, Fruit_IMG.getWidth()); Fruit_Origin = Fruit_Loader.getOrigin(Body, Fruit_IMG.getWidth()).cpy(); is_Next_Fruit_Touched = false; up = y; Gdx.app.log("Initial Y-coordinate", "Y at " + up); //Once it's touched, the next fruit will set to drag. if(n < 50) { n++; }else{ System.exit(0); } } return true; } And take note, at show() method , the view size from the camera is at 720x1280: camera_1 = new OrthographicCamera(); camera_1.viewportHeight = 1280; camera_1.viewportWidth = 720; camera_1.position.set(camera_1.viewportWidth * 0.5f, camera_1.viewportHeight * 0.5f, 0f); camera_1.update(); I know it's a good idea to add weight to make the falling object falls faster once I released the finger from the touchUp() after I picked the object from the upper right of the screen but the speed remains either constant or slow. How can I solve this? Can you help?

    Read the article

  • What can I do to make sure my code gets maintained in a developer light environment?

    - by asjohnson
    I am a contract data analyst, so I bounce between jobs every 3-6 months, which I find to be a good fit for me, but it leads to some problems when it comes to coding. I mostly do statistics (I've asked a similar question on cross validated, but the answers there are not relevant here), but I have also found out that the business world loves excel and loves copying and pasting the same thing over and over again even more. This led me to learn how to write VBA scripts and then VB.NET programs to automate as many of these reports as I can. I am certain my programs are not the most elegant, but I put a good bit of effort into making sure they work under as many cases as I can test, I add in exceptions and try to code so the program can handle changes in the files that it processes, but there is a limit, if you remove a huge portion of the data, there is a good chance my program is going to trip up, which I accept will inevitably happen. Usually a pretty minor change in the code fixes the problem and I do try and comment my code and make it readable under the assumption that some other person will have to read it some day. My problem is that I generally get put on teams of folks with essentially no experience with programming (like VBA would be a huge stretch for anyone I work directly with). I am wondering what I should be doing as the person that wrote the code to do my best to keep it maintained. I have two approaches in mind (outlined next), but would be very happy to get any advice. Solution 1: Find the more tech savvy coworkers and run them through the programs and what basic changes can be made. Honestly automating excel is about as easy as it can get when it comes to programming, so I feel like I could teach someone the basics of maintaining it pretty quick. Solution 2: Get in touch with the IT department and show them what is going on and maybe they will be able to help. The problem here is that the IT department is constantly swamped (as I'm sure many of you know) and I feel like kind of a jerk for dumping more things on them. I do leave my personal email address with places and am willing to answer quick questions via email, but I view the need for more exhaustive maintenance as something of an inevitability and would like to make sure I do my due diligence to make sure it gets done. I imagine some combination of the two approaches outlined there, but is there any kind of heads up I should give IT? I feel like I would be annoyed if I started getting requests to fix a program that I had never seen from some random guy that is no longer there.

    Read the article

  • On the art of self-promotion

    - by Tony Davis
    I attended Brent Ozar’s Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a ‘perfect storm’ of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one’s work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven’t far more qualified and established commentators, MVPs and so on, already said it? While it’s a good idea to pick reasonably fresh and interesting topics, it’s more important not to let such fears lead to writer’s block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn’t always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what’s involved in getting an application that is ‘done’ ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we’d love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to ‘throw your hat into the ring’, drop us a mail at [email protected]. Cheers, Tony.

    Read the article

  • On the art of self-promotion

    - by Tony Davis
    I attended Brent Ozar's Building the Fastest SQL Servers session at Tech Ed last week, and found myself engulfed in a 'perfect storm' of excellent technical and presentational skills coupled with an astute awareness of the value of promoting one's work. I spend a lot of time at such events talking to developers and DBAs about the value of blogging and writing articles, and my impression is that some could benefit from a touch less modesty and a little more self-promotion. I sense a reticence in many would-be writers. Is what I have to say important enough? Haven't far more qualified and established commentators, MVPs and so on, already said it? While it's a good idea to pick reasonably fresh and interesting topics, it's more important not to let such fears lead to writer's block. In the eyes of any future employer, your published writing is an extension of your resume. They will not care that a certain MVP knows how to solve problem x, but they will be very interested to see that you have tackled that same problem, and solved it in your own way, and described the process in your own voice. In your current job, your writing is one of the ways you can express to your peers, and to the organization as a whole, the value of what you contribute. Many Developers and DBAs seem to rely on the idea that their work will speak for itself, and that their skill shines out from it. Unfortunately, this isn't always true. Many Development DBAs, for example, will be painfully aware of the massive effort involved in tuning and adding resilience to rapidly developed applications. However, others in the organization who are unaware of what's involved in getting an application that is 'done' ready for production may dismiss such efforts as fussiness or conservatism. At the dark end of the development cycle, chickens come home to roost, but their droppings tend to land on those trying to clear up the mess. My advice is this: next time you fix a bug or improve the resilience or performance of a database or application, make sure that you use team meetings, informal discussions and so on to ensure that people understand what the problem was and what you had to do to fix it. Use your blog to describe, generally, the process you adopted, the resources you used and the insights that came from your work. Encourage your colleagues to do the same. By spreading the art of self-promotion to everyone involved in an IT project, we get a better idea of the extent of the work and the value of the contribution of all the team members. As always, we'd love to hear what you think. This very week, Simple-talk launches its new blogging platform. If any of this has moved you to 'throw your hat into the ring', drop us a mail at [email protected]. Cheers, Tony.

    Read the article

  • Simple collision detection in Unity 2D

    - by N1ghtshade3
    I realise other posts exist with this topic yet none have gone into enough detail for me. I am attempting to create a 2D game in Unity using C# as my scripting language. Basically I have two objects, player and bomb. Both were created simply by dragging the respective PNG to the stage. I have set up touch controls to move player left and right; gravity of any kind is not needed as I only require it to move x units when I tap either the left or right side of the screen. This movement is stored in a script called playerController.cs and works just fine. I also have a variable health = 3 for player, which is stored in healthScript.cs. I am now at a point where I am stuck. I would like it so that when player collides with bomb, health decreases by one and the bomb object is destroyed. So what I tried doing is using a new script called playerPhysics.cs, I added the following: void OnCollisionEnter2D(Collision2D coll){ if(coll.gameObject.name=="bomb") GameObject.Destroy("bomb"); healthScript.health -= 1; } While I'm fairly sure I don't know the proper way to reference a variable in another script and that's why the health didn't decrease when I collided, bomb never disappeared from the stage so I'm thinking there's also a problem with my collision. Initially, I had simply attached playerPhysics.cs to player. After searching around though, it appeared as though player also needed a rigidBody attached to it, so I did that. Still no luck. I tried using a circleCollider (player is a circle), using a rigidBody2D, and using all manner of colliders on one and/or both of the objects. If you could please explain what colliders (if any) should be attached to which objects and whether I need to change my script(s), that would be much more helpful than pointing me to one of the generic documentation examples I've already read. Also, if it would be simple to fix the health thing not working that would be an added bonus but not exactly the focus of this question. Bear in mind that this game is 2D; I'm not sure if that changes anything. Thanks!

    Read the article

  • How is programming affected by spatial aptitude?

    - by natli
    The longer I work on a project, the less clear it becomes. It's like I cannot seperate various classes/objects anymore in my head. Everything starts mixing up, and it's extremely hard to take it all apart again. I start putting functions in classes where they really don't belong, and make silly mistakes such as writing code that I later find was 100% obsolete; things are no longer clearly mappable in my head. It isn't until I take a step back for several hours (or days somtimes!) that I can actually see what's going on again, and be productive. I usually try to fight through this, I am so passionate about coding that I wouldn't for the life of me know what else I could be doing. This is when stuff can get really weird, I get so up in my head that I sort of lose touch with reality (to some extent) in that various actions, such as pouring a glass of water, no longer happen on a concious level. It happens on auto pilot, during which pretty much all of my concious concentration (is that even a thing?) is devoted to borderline pointless problem solving (trying to seperate elements of code). It feels like a losing battle. So I took an IQ test a while ago (Wechsler Adult Intelligence Scale I believe it was) and it turned out my Spatial Aptitude was quite low. I still got a decent score, just above average, so I won't have to poke things with a stick for a living, but I am a little worried that this is such a handicap when writing/engineering computer programs that I won't ever be able to do it seriously or professionally. I am very much interested in what other people think of this.. could a low spatial aptitude be the cause of the above described problems? Maybe I should be looking more along the lines of ADD or something similar, because I did get diagnosed with ADD at the age of 17 (5 years ago) but the medicine I received didn't seem to affect me that much so I never took it all that serious. Sorry if I got a little off topic there, I know this is not a mental help board, the question should be clear; How is programming affected by spatial aptitude? As far as I know people are born with low/med/high spatial aptitude, so I think it's interesting to find out if the more fortunate are better programmers by birth right.

    Read the article

  • Set iPhone Style Location Based Alerts On Your Android Device With Google Now

    - by Gopinath
    Location based alerts of iPhone are very useful. You can set an alert to popup as soon as you reach a specific location like “Pickup milk and eggs” when I’m near a grocery store. This feature was missing in Android for a long time, but last week at Google I/O conference Google released an update to Google Now which supports location based alerts. To setup a location based alert 1. Launch Google Now 2. Type or say add reminder 3. By default it shows time based alert interface, switch it location based by touching Location icon 4. Set reminder text, choose a location and touch Set reminder 5. Your alert is set now and as soon as you are close by the specified location, you’ll see an alert on your device. This is a nice feature and I’m using it quite often for the past couple of days.  There are couple of things missing from the current version of Google Now location based alerts– recurring alerts and ability to set alerts on leaving a specific location. It is not possible to recur location based alerts. You will be alerted only once as soon as you reach the location and it is not possible to repeat the alert next time you visit the location. Lets say you want to be reminded to say hi to friend’s parents whenever you are travelling close by their home. It does not work. The second missing feature is something basic and some how Google did not incorporate in their first iteration. Lets say you are at office now and you want to set up alert to pickup flowers when you leave office. Sounds like a simple use case for location based alerts right? But there is no way to set this type of alerts. Google Now alerts you as soon as you reach a location, but not when you leave a location. Do you have an Android that supports Google Now? If so what are your thoughts on location based alerts?

    Read the article

  • SFX Played Once per Collision or Hit

    - by David Dimalanta
    I have a question about using Box2D (engine for LibGDX used to make realistic physics). I observed on the code that I've made for the physics here below: @Override public boolean touchUp(int screenX, int screenY, int pointer, int button) { // TODO Touch Up Event if(is_Next_Fruit_Touched) { BodyEditorLoader Fruit_Loader = new BodyEditorLoader(Gdx.files.internal("Shape_Physics/Fruity Physics.json")); Fruit_BD.type = BodyType.DynamicBody; Fruit_BD.position.set(x, y); FixtureDef Fruit_FD = new FixtureDef(); // --> Allows you to make the object's physics. Fruit_FD.density = 1.0f; Fruit_FD.friction = 0.7f; Fruit_FD.restitution = 0.2f; MassData mass = new MassData(); mass.mass = 5f; Fruit_Body[n] = world.createBody(Fruit_BD); Fruit_Body[n].setActive(true); // --> Let your dragon fall. Fruit_Body[n].setMassData(mass); Fruit_Body[n].setGravityScale(1.0f); System.out.println("Eggs... " + n); Fruit_Loader.attachFixture(Fruit_Body[n], Body, Fruit_FD, Fruit_IMG.getWidth()); Fruit_Origin = Fruit_Loader.getOrigin(Body, Fruit_IMG.getWidth()).cpy(); is_Next_Fruit_Touched = false; up = y; Gdx.app.log("Initial Y-coordinate", "Y at " + up); //Once it's touched, the next fruit will set to drag. if(n < 50) { n++; }else{ System.exit(0); } } return true; } Now, I'm thinking which part o line should I implement for the sound effects. My objectives to make SFX played once for every collision (Or should I say "SFX played once per collision"?) on the following: SFX played once if they hit on the objects of its kind. (e.g. apple vs. apple) SFX played once on a different sound when it hit on the ground. (e.g. apple land on the mud) Take note that I'm using Box2D for the Java programming version thanks to LibGDX via Box2D engine and I edited the physics body using Physics Body Editor before I implement it to code. I tried to check every available methods for body, fixture definition, or body definition to code for the SFX when hit but it seems only for the gravity and weight. Is there possibly available on the document for SFX played when collision happens if possible?

    Read the article

  • Google search results are invalid

    - by Rufus
    I'm writing a program that lets a user perform a Google search. When the result comes back, all of the links in the search results are links not to other sites but to Google, and if the user clicks on one, the page is fetched not from the other site but from Google. Can anyone explain how to fix this problem? My Google URL consists of this: http://google.com/search?q=gargle But this is what I get back when the user clicks on the Wikipedia search result, which was http://www.google.com/url?q=http://en.wikipedia.org/wiki/Gargling&sa=U&ei=_4vkT5y555Wh6gGBeOzECg&ved=0CBMQejAe&usg=AFQjeNHd1eRV8Xef3LGeH6AvGxt-AF-Yjw <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html lang="en" dir="ltr" class="client-nojs" xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Gargling - Wikipedia, the free encyclopedia</title> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <meta http-equiv="Content-Style-Type" content="text/css" /> <meta name="generator" content="MediaWiki 1.20wmf5" /> <meta http-equiv="last-modified" content="Fri, 09 Mar 2012 12:34:19 +0000" /> <meta name="last-modified-timestamp" content="1331296459" /> <meta name="last-modified-range" content="0" /> <link rel="alternate" type="application/x-wiki" title="Edit this page" > <link rel="edit" title="Edit this page" > <link rel="apple-touch-icon" > <link rel="shortcut icon" > <link rel="search" type="application/opensearchdescription+xml" > <link rel="EditURI" type="application/rsd+xml" > <link rel="copyright" > <link rel="alternate" type="application/atom+xml" title="Wikipedia Atom feed" > <link rel="stylesheet" href="//bits.wikimedia.org/en.wikipedia.org/load.php?debug=false&amp;lang=en&amp;modules=ext.gadget.teahouse%7Cext.wikihiero%7Cmediawiki.legacy.commonPrint%2Cshared%7Cskins.vector&amp;only=styles&amp;skin=vector&amp;*" type="text/css" media="all" /> <style type="text/css" media="all">#mwe-lastmodified { display: none; }</style><meta name="ResourceLoaderDynamicStyles" content="" /> <link rel="stylesheet" href="//bits.wikimedia.org/en.wikipedia.org/load.php?debug=false&amp;lang=en&amp;modules=site&amp;only=styles&amp;skin=vector&amp;*" type="text/css" media="all" /> <style type="text/css" media="all">a:lang(ar),a:lang(ckb),a:lang(fa),a:lang(kk-arab),a:lang(mzn),a:lang(ps),a:lang(ur){text-decoration:none} /* cache key: enwiki:resourceloader:filter:minify-css:7:d5a1bf6cbd05fc6cc2705e47f52062dc */</style>

    Read the article

  • Managing accounts on a private website for a real-life community

    - by Smudge
    Hey Pro Webmasters, I'm looking at setting-up a walled-in website for a real-life community of people, and I was wondering if anyone has any experience with managing member accounts for this kind of thing. Some conditions that must be met: This community has a set list of real-life members, each of whom would be eligible for one account on the website. We don't expect or require that they all sign-up. It is purely opt-in, but we anticipate that many of them would be interested in the services we are setting up. Some of the community members emails are known, but some of them have fallen off the grid over the years, so ideally there would be a way for them to get back in touch with us through the public-facing side of the site. (And we'd want to manually verify the identity of anyone who does so). Their names are known, and for similar projects in the past we have assigned usernames derived from their real-life names. This time, however, we are open to other approaches, such as letting them specify their own username or getting rid of usernames entirely. The specific web technology we will use (e.g. Drupal, Joomla, etc) is not really our concern right now -- I am more interested in how this can be approached in the abstract. Our database already includes the full member roster, so we can email many of them generated links to a page where they can create an account. (And internally we can require that these accounts be paired with a known member). Should we have them specify their own usernames, or are we fine letting them use their registered email address to log-in? Are there any paradigms for walled-in community portals that help address security issues if, for example, one of their email accounts is compromised? We don't anticipate attempted break-ins being much of a threat, because nothing about this community is high-profile, but we do want to address security concerns. In addition, we want to make the sign-up process as painless for the members as possible, especially given the fact that we can't just make sign-ups open to anyone. I'm interested to hear your thoughts and suggestions! Thanks!

    Read the article

  • How granular should a command be in a CQ[R]S model?

    - by Aaronaught
    I'm considering a project to migrate part of our WCF-based SOA over to a service bus model (probably nServiceBus) and using some basic pub-sub to achieve Command-Query Separation. I'm not new to SOA, or even to service bus models, but I confess that until recently my concept of "separation" was limited to run-of-the-mill database mirroring and replication. Still, I'm attracted to the idea because it seems to provide all the benefits of an eventually-consistent system while sidestepping many of the obvious drawbacks (most notably the lack of proper transactional support). I've read a lot on the subject from Udi Dahan who is basically the guru on ESB architectures (at least in the Microsoft world), but one thing he says really puzzles me: As we get larger entities with more fields on them, we also get more actors working with those same entities, and the higher the likelihood that something will touch some attribute of them at any given time, increasing the number of concurrency conflicts. [...] A core element of CQRS is rethinking the design of the user interface to enable us to capture our users’ intent such that making a customer preferred is a different unit of work for the user than indicating that the customer has moved or that they’ve gotten married. Using an Excel-like UI for data changes doesn’t capture intent, as we saw above. -- Udi Dahan, Clarified CQRS From the perspective described in the quotation, it's hard to argue with that logic. But it seems to go against the grain with respect to SOAs. An SOA (and really services in general) are supposed to deal with coarse-grained messages so as to minimize network chatter - among many other benefits. I realize that network chatter is less of an issue when you've got highly-distributed systems with good message queuing and none of the baggage of RPC, but it doesn't seem wise to dismiss the issue entirely. Udi almost seems to be saying that every attribute change (i.e. field update) ought to be its own command, which is hard to imagine in the context of one user potentially updating hundreds or thousands of combined entities and attributes as it often is with a traditional web service. One batch update in SQL Server may take a fraction of a second given a good highly-parameterized query, table-valued parameter or bulk insert to a staging table; processing all of these updates one at a time is slow, slow, slow, and OLTP database hardware is the most expensive of all to scale up/out. Is there some way to reconcile these competing concerns? Am I thinking about it the wrong way? Does this problem have a well-known solution in the CQS/ESB world? If not, then how does one decide what the "right level" of granularity in a Command should be? Is there some "standard" one can use as a starting point - sort of like 3NF in databases - and only deviate when careful profiling suggests a potentially significant performance benefit? Or is this possibly one of those things that, despite several strong opinions being expressed by various experts, is really just a matter of opinion?

    Read the article

< Previous Page | 147 148 149 150 151 152 153 154 155 156 157 158  | Next Page >