Search Results

Search found 5756 results on 231 pages for 'cpu utilization'.

Page 152/231 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

• recommendations for a lightweight linux distribution for a test server

  - by Jack

  I'm planning on setting up a test server to experiment with some application servers (tomcat/jboss/...) and with some portals. Now the machine I've set aside for this is lightweight CPU/GPU wise(Atom D510, 4 gigabyte ram, 500 GiB hdd, onboard GPU). But it should suffice for most things, I'm more interested in the stability of JBoss/Tomcat for my purposes than the stability. However I'm having a bit of trouble picking an appropriate distribution size/performance/setup time wise/security wise since it seems I can't sneeze without another distribution popping up. I've been thinking about going for Fedora since I've read that that distribution has been optimized for Atom, but I'm not really familiar with it. My experience with Linux has mostly been limited to Ubuntu and some tinkering with puppylinux. I'm not afraid to get my hands dirty using the command line. I'm not planning on starting a discussion per se, mostly the pros/cons that people have encountered with some distributions

  Read the article

• New power supply and now HDDs are not recognized

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• HDD not detected whenever first power on (detected at BIOS level)

  - by Alvin Lim

  I am using Asus P8H61-M LX Motherboard with latest version of BIOS: 4401 One SATA-3 Western Digital Black Series 1.5TB is attached to SATA port 0 A Samsung 22x DVDRW SATA drive attached to SATA Port 1. ps/2 Logitech mouse and keyboard. CPU is i3 with DDR3 8Gb RAM. no other devices are installed. My problem is that when I turn on the computer, the WD HDD is not detected. ie cannot be booted. I have to press ctrl+alt+del in order to get it detected. I'd used the WD data lifeguard software to scan the HDD, the smart status is OK, the surface scan does not show any error at all. Where did I do wrong? Any advice is greatly appreciated.

  Read the article

• Linux IO scheduler on databases with RAID

  - by Raghu

  Hi, I have a linux database(MySQL) server(Dell 2950) with a 6-disk RAID 10. The default IO scheduler on it is CFQ. However, from what I have read and heard, there is no need for a scheduler like CFQ when reordering/scheduling is also done by underlying RAID controller; on the contrary since it does not account underlying RAID configuration into account performance may actually degrade with CFQ. The primary concern is to reduce CPU usage and improve throughput. Also, I have seen recommendations of using noop/deadline IO scheduler for databases primarily because of the nature of their R/W access.

  Read the article

• Custom PC won't boot Windows 7 dvd but does with windows vista

  - by M_rk

  I ordered a custom build PC. (It was assembled by the store). This is the setup Motherboard: Asrock A75 PRO4-M DVD drive: LG GH24NS90 SSD: Samsung 830 series 128GB DDR3 SDRAM: 2× Corsair XMS3 CMX4GX3M1A1600C9 (2× 4GB) APU (CPU+GPU): AMD A8-3850 Boxed I got a installation DVD for Windows 7 Professional x64 English (including SP1), but it doesn't work. I got a new one from the store and it doesn't work either. However they work on a other PC. So the DVDs aren't bad. I tried an old installation DVD for Windows Vista. Both 32 bit and 64 bit work. So the boot order and such are right and working on the new PC. Is there something I'm missing here? Any ideas on how to make it work?

  Read the article

• What are possible causes of keyboard lag on my desktop machine?

  - by Jer

  I am running Windows 7 and began experiencing keyboard lag in most applications, and it seems to be getting worse. Certain websites are the worst - on some, I can type a sentence, take my hands off the keyboard, and watch the characters continue to appear on the screen for several seconds. Others are not as bad, but still noticeable and annoying. I just started noticing it in non-browser applications (e.g. Outlook) as well. I've disabled all extensions in Firefox, rebooted my machine, and that did nothing. There is nothing using much memory or cpu cycles, even when the lag is occurring. This is a machine at work with very strict controls over what can be installed, so the chances of any kind of malware are very slim. I don't believe anything as been installed since before the problem started. What could be causing this, and/or what can I do to debug?

  Read the article

• Is paravirtualization evil?

  - by Daniel

  I have an VMWare ESX Server v3.5 with a few virtualized Debian Lenny VMs (kernel 2.6.22 with vmi) running Apache Tomcat 5.5. I enabled paravirtualization, and Disk IO increased from about 240MB/s to 380MB/s, making me a happy admin. The problem now is that my apache tomcat becomes deadlocked during startup, running with 200% CPU (I have 2 CPUS assigned to the VM), and don't know how to get both: A stable system and a fast system. I somewhere heared that paravirtualization is legacy anyway and won't be available on newer ESX servers. Is there a replacement for this seemingly performance-improving option, or is it discontinued becauses it is just unstable? What is the state of paravirtualization? Should I ignore it completely? Thanks for all answers in advance.

  Read the article

• Amazon EC2 Web server in Load Balancer gives 503

  - by dale

  we've been running our web servers at Amazon with load balancer and auto-scaling for over a year with no problem. All of a sudden today the request began to get aborted with the error: 503 ... Backend server is at capacity The web servers are at 1% CPU and no other alarms trigger. We use Amazons load balancer and nginx. Lots of requests like this are showing up in the access_log. 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:09 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.246.114.93 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.229.15.214 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" 10.229.15.214 - - [05/Jun/2014:20:16:10 +0000] "-" 400 0 "-" "-" Any thoughts?

  Read the article

• pdflush hanging on Amazon EBS drives when using multi-GB files - any workaround?

  - by rhh

  Hello, When I run gunzip on a 1.7GB file (which generates an 8GB file) on an EBS volume, pdflush freezes after gunzip runs and the CPU hangs indefinitely at 100% IO Wait. Here's the output from 'ps aux | grep pdflush'. Note the D status root 87 0.0 0.0 0 0 ? D 06:18 0:00 pdflush root 88 0.0 0.0 0 0 ? D 06:18 0:00 pdflush The only solution is to kill the pdflush processes. The processes don't die immediately either. This problem is repeatable and happens with new instances. I'm running 2xlarge instances and I have way more RAM free than is being used (i.e. /proc/meminfo shows 20+GB MemFree) Has anyone found a workaround to this problem in the past? Thanks for any thoughts. Robert

  Read the article

• Computer temporarily freezes and then resumes

  - by trizicus

  This happens on ALL operating systems (7, Ubuntu, etc.). What happens is everything for 1-3 seconds becomes unresponsive, I then hear what sounds like my other internal hard drive 'spinning up', and then viola everything is responsive again. Note: Already ran SMART tests, no issues at all. I think issue is that the HDD spins down and when need it gets 'turned-on' (OS settings turn off HDD's after 20 mins of inactivity) and because my pagefile is on the other HDD it causes OS to temporarily freeze. Need more tips, and insight. Thanks More info: Running Quad CPU, 4GB RAM, Intel SSD, GT 240.

  Read the article

• nagiosgraph new services not showing

  - by Eleven-Two

  I am using Nagios Core with Nagiosgraph and had only enabled graphing for cpu usage for a while. This worked fine, but now i wanted to add some more services (for example memory usage). The new services are not working (no rrd data is generated). The Nagiosgraph site only says "no data available" and I get no error in apache log, nagiosgraph.log or nagiosgraph-cgi.log. The new services are standard services (nsclient++ MEMUSE for example) and of course they are included in the map file. If I execute the checks manually, it shows also the perfdata. I added the services by enabling the "graphed-service" use. Did I miss something?

  Read the article

• Home movie video browser

  - by Jim Hunziker

  I have a bunch of home movies that don't have useful filenames because they came straight off the camera. (I'm using Vista 64, by the way.) Picasa is pretty good for browsing through them and watching them, but it doesn't use my video card for rendering the videos. My CPU gets pegged at max usage, and full screen barely works. Windows Media Player or Quicktime works fine. Is there another application (like Picasa) that can be used for browsing through movies that both uses my video card and shows thumbnails of all the movies in my collection? I'd rather have something nicer than Windows Explorer. (The movies are h.264 AAC 1280x720.)

  Read the article

• Enable a program in Windows to run multiple times?

  - by user135490

  I've got this legacy software that only allows you to run one copy at a time, it detects that you have another session opened and it won't allow you to open a second instance. The problem is this is a cpu intensive program and it only use a single core. Is there any hacks or tweaks so I can trick it and open more than one instance? This would allow me to retire about 5 servers... I'm using Windows 2008 R2. I had to use cff explorer to enable the use more than 2GB RAM as the program crashes when it tries to use more than 2GB.

  Read the article

• HAProxy being killed with more that 54,000 connections

  - by Olly

  I am trying to run HAProxy (1.4.8) on a EC2 machine running Ubuntu 10.04. I need HAProxy to be able to handle many thousands of long-running persistent connections (websockets). With the current setup HAProxy gets killed at around 54,300 connections (roughly). If I am running HAProxy in the foreground, the only output is "Killed". Am I right in thinking this is the Kernel killing the process? Is this because it is out of resources? Can I increase the resources? The CPU and memory consumption are low with 50,000 connections, so I don't suspect either of these. How can I prevent this from happening?

  Read the article

• Tuning MySQL to consume less memory

  - by Alex

  I have a VM which has 2GB Ram, (full specs) And I am setting up a site which has one table in particular with over a million records. There's little or no usage of this particular database (perhaps once or twice a day) but simply running mysql grinds the whole server to a halt. I've looked through the top results but nothing is really denting the CPU however the memory seems to be the issue. The site isnt even live of taking requests yet. the memory situation looks like this: # free -m total used free shared buffers cached Mem: 2006 1880 126 0 3 53 -/+ buffers/cache: 1823 183 Swap: 2047 345 1702 Are there any good pointers to tune mysql to stop hogging the system memory? Thanks very much EDIT: (requested by 8bit): http://tny.cz/b41a0b12

  Read the article

• Am I using too much memory? (Rails on EC2 with Resque)

  - by Stpn

  I am looking at the memory usage of the Rails application (it uses background processes via Resque) and since the common answer to the question, "how many workers is too many" was "test and see", I ran some memory commands and wonder if someone can help figuring if the memory usage is high enough already, or I can still add some extra workers.. so (this is all under the maximum load): $ free -t -m total used free shared buffers cached Mem: 1756 1532 223 0 12 229 -/+ buffers/cache: 1291 464 Swap: 895 10 885 Total: 2652 1543 1108 $ vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 10588 156172 13400 326476 1 6 4 0 5 4 1 0 99 0 If there is any extra info I can provide to help answer this, I would be happy to do so. If the question is strange in some way, please let me know I'd be glad to fix etc..

  Read the article

• Very Hot P4 3.4 GHz

  - by Timothy R. Butler

  My Pentium 4 3.4 GHz is running hot even with a new fan on my case's heatsink (80mm rated at ~ 40 CFM). If I stress the CPU, it goes over Intel's maximum temperature rating. I'm contemplating putting in a "PCI cooler" (i.e. a fan that fits into an empty PCI slot) to see if I could get better airflow in the case. The slot isn't far from the processor and heatpipes that lead from the processor to the fan, so I'm hopeful this would help, but not entirely certain. Thoughts?

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• How would I measure the amount of RAM needed per Glassfish domain? [closed]

  - by oligofren

  Possible Duplicate: Can you help me with my capacity planning? In our test environment we have a lot of apps spread out over a few servers and Glassfish domains. To make versioning easier I would have liked to have one Glassfish domain per customer per app (kind of like a heavyweight version of lots of jetty instances). But I have heard that Glassfish is kind of heavy on the resources, and so I would need to measure approximately how many instances would fit in the available RAM. These are low-traffic/low load testing servers, so CPU is not really an issue, though RAM might be. How would I get an approximate measure of how much RAM is needed? This is one Glassfish 3 instance with one heavy EAR application deployed. top? jvmstats? ??

  Read the article

• How do I troubleshoot a server I can't get logged into?

  - by Karl

  This morning I am unable to log into SQL Server because it appears to be busy doing something, so much so that CPU usage is constantly at 98%-99%. I am guessing that something has gone wrong with the maintenance plan that ran over the weekend, but I can't get into the error logs see what is happening. On logging in I keep getting messages like "insufficiently memory in the buffer pool" and "the server is not responding". Is there any way I can figure out what is happening without logging onto to the server? Or some way I can squeeze in a login?

  Read the article

• How can I automate restarting a vmware vm

  - by Stu

  I have a vm that does nothing but run magic jack. Magic jack doesn't run perfectly in a vm. It works great for days then randomly the vm reboots. except it doesn't come up clean. It gets to the windows splash screen and hangs spinning the cpu. I don't care how I solve the problem (although not crashing in the first place would be ideal) but I just need the vm to reboot cleanly when it does crash. Is there a windows registry setting I can say "on crash, reboot" or something like that?

  Read the article

• Automatically detecting temperature sensors on startup (Ubuntu 10.10)

  - by dpitch40

  I am very close to achieving my goal of setting up a CPU temperature graph that is displayed in the top panel of my desktop. I have the applet and have gotten it to graph temperatures, which appear to be being sensed correctly. However, my machine doesn't find its temperature sensors by default; I have to run sudo modprobe coretemp for the sensors command to work, then log off and back in before the graph applet starts displaying my temperatures. I am wondering if I can somehow tell the kernel to load the coretemp module on startup so I don't have to keep doing these extra steps. I have tried putting this command in my startup applications, but I think its need for root permission is keeping this from working. Is there a way to set up startup applications with root permission, or some other way to ensure that this module is loaded at startup? If anyone is curious, I'm running 64-bit Ubuntu 10.10 on a Lenovo G770 laptop with a Core i5 processor and the 2.6.35 kernel.

  Read the article

• Server OS: put it on a separate drive? Yes, no, or depends on the situation?

  - by captainentropy

  Hi, I would like opinions, or facts, both preferably, on whether it's ok to install a server's OS on the RAID array or not. I would predict installation on separate drives is the best but I'm interested in the performance. The server in question will have 8 cores (2.4GHz ea.), 24GB RAM, and ~16TB of usable space of server-class drives in RAID10. There is also a subsytem of an ~equivalent size for backup. I will be running CPU/memory intesive applications on this server in addition to it being file storage for my work (research lab). IF I install the OS (haven't decided which one, probably Ubuntu or Fedora or some other good linux distro) on separate drives will there be any performance problems if they aren't configured in RAID10? IF it is better to have the OS on separate drives should I go for 150GB velociraptors in RAID1 or smallish SSD drives in RAID1? Money is unfortunately a factor as I think I'm close to maxing my budget as it is. Thanks!

  Read the article

• Asus me302c create script crash

  - by wxfred

  State beforehand: So far, only Asus me302c would crash when it creates a script. This device can create renderscript context successfully 06-03 10:12:50.509: V/RenderScript_jni(3144): RS compat mode 06-03 10:12:50.509: V/RenderScript(3144): 0x610bbfc0 Launching thread(s), CPUs 4 06-03 10:12:50.549: D/libEGL(3144): loaded /vendor/lib/egl/libEGL_POWERVR_SGX544_115.so 06-03 10:12:50.559: D/libEGL(3144): loaded /vendor/lib/egl/libGLESv1_CM_POWERVR_SGX544_115.so 06-03 10:12:50.559: D/libEGL(3144): loaded /vendor/lib/egl/libGLESv2_POWERVR_SGX544_115.so 06-03 10:12:50.619: D/OpenGLRenderer(3144): Enabling debug mode 0 06-03 10:12:52.869: D/dalvikvm(3144): Rejecting registerization due to ushr-int/lit8 v4, v7, (#19) When create a script, it crashed. 06-03 09:55:09.859: D/basefilter(26682): ===createScript=== 06-03 09:55:09.869: E/RenderScript(26682): Unable to open shared library (/data/data/xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxx.xxxx//lib/librs.basefilter.so): Cannot load library: soinfo_relocate(linker.cpp:975): cannot locate symbol "_Z3dotDv3_fS_" referenced by "librs.basefilter.so"... 06-03 09:55:09.869: E/RenderScript(26682): Unable to open system shared library (/system/lib/librs.basefilter.so): (null) 06-03 09:55:09.869: D/AndroidRuntime(26682): Shutting down VM 06-03 09:55:09.869: W/dalvikvm(26682): threadid=1: thread exiting with uncaught exception (group=0x418b9e10) 06-03 09:55:09.869: E/AndroidRuntime(26682): FATAL EXCEPTION: main 06-03 09:55:09.869: E/AndroidRuntime(26682): android.support.v8.renderscript.RSRuntimeException: Loading of ScriptC script failed. 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.support.v8.renderscript.ScriptC.<init>(ScriptC.java:69) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.ScriptC_BaseFilter.<init>(ScriptC_BaseFilter.java:41) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.ScriptC_BaseFilter.<init>(ScriptC_BaseFilter.java:35) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.xxxxxx.TeethWhiteningRSFilter.onCreateScript(TeethWhiteningRSFilter.java:19) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.xxxxxx.TeethWhiteningRSFilter.onCreateScript(TeethWhiteningRSFilter.java:1) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.BaseRSFilter.createScript(BaseRSFilter.java:39) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.RSFilterEngine.addFilter(RSFilterEngine.java:76) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxx.xxxx.BeautyActivity.changeBeautyEffect(BeautyActivity.java:277) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxx.xxxx.BeautyActivity$2.onClick(BeautyActivity.java:100) 06-03 09:55:09.869: E/AndroidRuntime(26682): at com.android.internal.app.AlertController$ButtonHandler.handleMessage(AlertController.java:166) 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.os.Handler.dispatchMessage(Handler.java:99) 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.os.Looper.loop(Looper.java:152) 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.app.ActivityThread.main(ActivityThread.java:5132) 06-03 09:55:09.869: E/AndroidRuntime(26682): at java.lang.reflect.Method.invokeNative(Native Method) 06-03 09:55:09.869: E/AndroidRuntime(26682): at java.lang.reflect.Method.invoke(Method.java:511) 06-03 09:55:09.869: E/AndroidRuntime(26682): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:793) 06-03 09:55:09.869: E/AndroidRuntime(26682): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:560) 06-03 09:55:09.869: E/AndroidRuntime(26682): at dalvik.system.NativeStart.main(Native Method) Now, I will post some related infomation. project.properties ... renderscript.target=9 renderscript.support.mode=true sdk.buildtools=19.0.3 device info Brand: Asus Model: ME302C OS: 4.2.2 CPU: Intel(R) Atom(TM) CPU Z2560 @1.60GHz GPU Renderer PowerVR SGX 544MP Finally, by the way, the same code runs well on Galaxy s2, s4, note 2.

  Read the article

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >