Search Results

Search found 27979 results on 1120 pages for 'network drive'.

Page 152/1120 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >

  • Why the VPN Network Shake-Up?

    - by Brent Arias
    I can RDP to another machine on my home network, only if I'm not also hooked up to my employer's VPN with the Cisco VPN client. Indeed, I can't even ping the other machine by name in this mode, because ICMP suddenly thinks that ( ping myMachine ) now means ( ping myMachine.myEmployer.com ). Of course there is no machine by that latter name, and so it fails. Even weirder, once I disconnect from the VPN I can again ping myMachine successfully, but ICMP reports the machine by its MAC address instead of its IP address. I don't think I've ever seen ping identify another machine by its MAC address. So two questions: How can I access via RDP/ping the other machine BY NAME on my local network while also connected to the VPN? Why is ping identifying a MAC address for the machine on my home network, instead of an IP address? And how can I change this so that an IP address is reported instead? For question #1, I can indeed access the other machine on my home network by IP address. I suspect if I put the name-IP pair into my HOSTS file, then I would be able to access it even when connected to the VPN. But I wonder if there is another (more elegant) solution?

    Read the article

  • Hard Drive Light Emulator

    - by ProfKaos
    I've just got a new Dell Inspiron, and I'm a little disconcerted without the reassurance of a flashing hard drive light, especially with long installs. Is there something that can reveal HDD activity onscreen, e.g. in the system tray?

    Read the article

  • OAS log files filling up hard drive

    - by Andrew Hampton
    We've had issues with log files for Oracle Application Server filling up the hard drive on our server. The files are in the /network/admin folder and are named server.log_XXXXX.trc and client.log_XXXXX.trc where XXXXX are 5 digits. The files are typically anywhere from 1-2MB in size but can be up to 100MB and thousands of them are created at a rate of about 5-10 per minute. Does anyone know how to disable these logs? Thanks!

    Read the article

  • OpenVZ with bridged interfaces and VLAN

    - by Deimosfr
    Hi, I've got a problem with OpenVZ with bridged VLAN. Here is my configuration: +------+ +-------+ +-----------+ +---------+ br0 |VE101 | | | | OpenBSD |----->| Debian |------->| | | WAN |--->| Router | | OpenVZ | +------+ | | | Firewall |----->| br0 br1 | br1 +------+ +-------+ +-----------+ +---------+------->|VE102 | |br0 | | |VLAN br0.110 +------+ v +---------+ |VE103.110| +---------+ I can't make VLAN work on br0 (br0.110) and I would like to understand why. I don't have any switch so no problem with unmanageable switch. I've configured a VLAN interface on OpenBSD in /etc/hostname.vlan110: inet 192.168.110.254 255.255.255.0 NONE vlan 110 vlandev sis1 And it seems to be working fine. I've also adapted my PF configuration to work with VLAN but I don't see any incoming traffic. On my Debian Lenny, here is my interfaces configuration : # The loopback network interface auto lo iface lo inet loopback # br0 auto br0 iface br0 inet static address 192.168.100.1 netmask 255.255.255.0 gateway 192.168.100.254 network 192.168.100.0 broadcast 192.168.100.255 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off # VLAN 110 auto br0.110 iface br0.110 inet static address 192.168.110.1 netmask 255.255.255.0 network 192.168.110.0 gateway 192.168.110.254 broadcast 192.168.110.255 pre-up vconfig add br0 110 post-down vconfig rem br0.110 It looks OK, but when I start my VE, here is the message: ... Configure veth devices: veth103.0 Adding interface veth103.0 to bridge br0.110 on CT0 for VE103 can't add veth103.0 to bridge br0.110: Operation not supported VE start in progress... So I've got one error here. I've followed this documentation http://wiki.openvz.org/VLAN but it doesn't work. I've certainly missed something but I don't know why. Someone could help me please? Thanks

    Read the article

  • In Windows Virtual PC: Is there a way to assign local drive letter in the Guest O/S that points to a

    - by Clay Nichols
    I have a bunch of programming projects on my P:\ drive (on Windows 7) I'm now doing some programming within Virtual PC Windows XP Mode and I'd like to "call" that drive, within the Win XP guest, the P: drive. I've mapped drive letter P: to "network" drive on the Host but that goes across the network so it's very slow. I tried using the SUBST command but it wouldn't take the \tsclients\p as a parameter. Basically, the command line interpreter (is that DOS on Win 7 ??) doesn't recognize that directory (\tsclients\p)

    Read the article

  • Windows 7 Bootcamp to see data doubler SATA SSD in Optical Bay Connector

    - by bumble_bee_tuna
    Hi I purchased a OWC data doubler http://eshop.macsales.com/item/OWC/DDAMBS0GB/ ... Long story short it lets you add a second HD to your macbook pro in place of the cd/dvd drive (which is useless anyway, impossible to get stuff out when stuck). My current setup is 600gb intel SSD bootdrive 100gb partition for OSX / 500gb for Windows 7 Prof from Bootcamp (use 99 % of time). My desire is to have a second 300gb SSD to run disk intensive VM's off of. So I added a second 300gb intel SSD (again, NO desire to boot off of) on the sata optical port. I can see the drive no problem if I boot in to OSX, however, can't see it in disk management on Win7 ??? Any ideas similar experience ... Funny thing is I can see it in "Device Manager Disk Drivers" but not Disk Management ??? Also no I don't want to use Fusion/Parallels this is a waste of resources for me.

    Read the article

  • What do I need to connect a hard disk to my laptop via non powered eSata?

    - by Ludo
    Hi there. I'm looking at getting a hard disk for my laptop (OCZ Vertex 2 SSD) which I would like to connect via eSata. My laptop has an eSata port, but it's not powered (Thinkpad T410). I presume this means I need more than just an eSata to eSata cable as it needs power, so does this mean I need a caddy for the hard disk as well which will provide power to the drive, or do I need one of them eSata cables that has a USB attachment too? I don't think the drive will come with a power supply. I realise this seems simple but I can't find an obvious answer online. Thanks for any assistance! Ludo.

    Read the article

  • My hard drive can only boot once every two times

    - by Eisaj
    Hi all, I just installed a Kingston 64 GB SSD into my laptop, replacing the old 80 GB 5400 RPM one. The drive starts up and works fine every other time. For example, if I'm running normally, and press "Restart", I get: 2100 Initialization error on HDD0. I turn off the computer manually, restart, and...it boots into Ubuntu again. This happens every other time without fail...anyone know what the problem could be?

    Read the article

  • Is there a clean way to tell Windows to release a volume?

    - by zneak
    Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive and has to abort there. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away?

    Read the article

  • UNMOUNTABLE BOOT VOLUME error on laptop with no CD Drive

    - by Menno
    I am getting the UNMOUNTABLE BOOT VOLUME error on my Samsung laptop which does not have a CD Rom drive. I tried to merge the C and D partitions to get more space but since then the laptop does not start up anymore. I dont care about the laptop, just about some pictures on there which I did not back up yet. I really hope someone can help me?!! I am a new user, so cant post pictures, but can send a screenshot if needed.

    Read the article

  • Dell PowerEdge R720 - Corrupted RAID

    - by BT643
    Apologies in advance for the lengthy question. We have a Dell PowerEdge R720 server with: 2 x 136GB SAS drives in RAID 1 for the OS (Ubuntu Server 12.04) 6 x 3TB SATA drives in RAID 5 for data A few days ago we were getting errors when trying to access files on the large RAID 5 partition. We rebooted the server and got a message about the raid controller has found a foriegn config. We've had this before, and just needed to use Dell's RAID configuration utility to import foreign config on the RAID. Last time this worked, but this time, it started doing a disk check then we got this: FSCK has returned the following: "/dev/sdb1 inode 364738 has a bad extended attribute block 7 /dev/sdb1 unexpected inconsistency run fsck manually (i.e without -a or -p options) MOUNTALL fsck /ourdatapartition [1019] terminated with status 4 MOUNTALL filesystem has errors /ourdatapartition errors where found while checking the disk drive for /ourdatapartition Press F to fix errors, I to Ignore or M for Manual Recovery" We pressed F to try and fix the errors, but it eventually errored with: Inode 275841084, i_blocks is 167080, should be 0. Fix? yes Inode 275841141 has an invalid extend node (blk 2206761006, lblk 0) Clear? yes Inode 275841141, i_blocks is 227872, should be 0. Fix? yes Inode 275842303 has an invalid extend node (blk 2206760975, lblk 0) Clear? yes .... Error storing directory block information (inode=275906766, block=0, num=2699516178): Memory allocation failed /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** e2fsck: aborted /dev/sdb1: ***** FILE SYSTEM WAS MODIFIED ***** mountall: fsck /ourdatapartition [1286] terminated with status 9 mountall: Unrecoverable fsck error: /ourdatapartition We noticed one of the drive lights was not lit at all, and thought this may have failed and be the problem. We replaced the drive with a spare, and tried "F" to repair it again, but we keep just getting the same error as above. In the RAID configuration utility, all drives show as "online" and "optimal". We do have this data on another replicated server, so we're not worried about "recovering" anything, we just want to get the system back online asap. The server has 64 or 32GB memory, can't remember off the top of my head, but either way, with a 14TB RAID, I think it may still not be enough. Thanks EDIT - I checked the memory usage while fsck was running as suggested and after 2 or 3 minutes, it looked like this, using up nearly all of our servers memory: When it failed after 5 minutes or so with the error in my post, the memory immediately freed up again:

    Read the article

  • How to maintain a SSD drive on Ubuntu ?

    - by Julien Nicoulaud
    I am running Ubuntu 10.04 on a Intel X25-M PostVille 160 Go SSD drive. How can I tell if there's something wrong ? What should/can I do to maintain its performance/health ? Should I use TRIM and how often ? This may look as a duplicate of this question, but I am more asking in term of good practices and learning how to use this new technology the right way...

    Read the article

  • Move Ubuntu to another drive

    - by Ben Dilts
    I have a laptop with an 80GB SSD and 500GB HDD. I currently have Windows installed on the SSD, and a 400GB data partition for Windows on the HDD. I set aside 100GB on the HDD to try out Ubuntu, and I'd like to make it my primary OS and switch it over to the (much) faster SSD. How could I go about getting my Ubuntu setup moved over to the SSD? I have a 120GB USB hard drive I can use if necessary for getting through it.

    Read the article

  • Shrink system volume, create new partition, & enlarge current partitions w/o losing data?

    - by studiohack
    My machine has a 300 GB hard drive. I'm planning to reinstall Windows 7 on this machine soon. It has three partitions: a System partition, and two equal data partitions for particular types of data (music, photos, docs, etc). These data partitions are too small for the data they hold, and the system partition is large enough to be shrunk. I want to create four partitions in preparation for the fresh reinstall, a System partition, and three data partitions of varying sizes (40, 50, & 60 GB respectively). My question: Can I shrink the System volume, create another partition, and make the existing two data partitions bigger without losing any data that is currently on the hard drive? Or is it better to format the whole thing, and create partitions after (thus removing the current OS) with a partitioning tool booting from CD? Can I reformat and create partitions with the Windows 7 set up DVD?

    Read the article

  • Options for connecting an external disk to an old laptop

    - by agnul
    I've tried connecting a 2.5" external drive to an old laptop which has only USB 1. The LED on the disk lights up, but the disk doesn't seem to spin up. Since the same disk works fine on a newer laptop my guess is that the old one doesn't output enough power on the USB port. Besides looking for an external drive with its own PSU, what would you suggest? Will one of those USB cables with two connectors work? What about a powered USB hub?

    Read the article

  • Ubuntu on an XPS 14 Ultrabook with mSATA cache and 500GB HD - how to partition for dual boot?

    - by JDS
    I am getting an XPS 14 ( http://www.dell.com/us/p/xps-14-l421x/pd ) and I want to dual-boot Windows and Ubuntu. This thing has a 500GB standard HD and a 32GB mSATA that can be used as cache. Does anyone know how this thing is partitioned? Is the OS installed on the mSATA drive and data is on the big HD? Is there a BIOS controller or maybe even a Windows driver that makes the mSATA drive and 500GB HD appear contiguous? I get the impression that something makes the mSATA be used invisibly as cache, but I can't find any technical documentation how that works. My primary concern here is wrt dual-booting Ubuntu. I want to know if I need to partition the mSATA separately, or the big HD, or just partition the "magic" contiguous disk space that appears available to the OS.

    Read the article

  • What methods are available for updating a non-Internet-connected VMWare ESXi host?

    - by romandas
    I have a stand-alone installation of VMWare vSphere Essentials, with a vCenter Server and 3 ESXi 4.0 host servers. The environment is intended to remain as a stand-alone network, with the exception that I can "float" a workstation or server between the 'Net and the VMWare network for patches and maintenance. With other installations, where the Internet is available, I've used the vSphere Host Update utility to connect to VMWare and then apply the patches to the ESXi hosts. My problem is that this utility does not seem to function if it cannot connect to both VMWare and the ESXi host at the same time, as the scan for patches function will not scan the server without connecting to VMWare's site to sync its repository first. Even if I sync it, disconnect from the 'Net and connect to the VMWare network, it still won't scan hosts for required patches -- it will prompt for syncing with VMWare and if you click No to syncing, the scan does not occur. Does anyone know of other options for updating the ESXi hosts in some automated fashion? I believe I can manually pull down required patches and apply them, but this will not scale well, and in the future I'm sure I'll want something a bit more scalable.

    Read the article

  • IDE Motherboard to Boot from a SATA 1T Hdd

    - by JavaMan
    I want to use my SATA HDD in my very old ASUS A7V8X-X motherboard (made in 2003). I intended to buy a cheap adapter for this. Say something similar to this one: http://www.cooldrives.com/satoidecofor.html But would there be any issue if I want to boot from this SATA drive? My impression is that these kind of adapters convert SATA signal and commands to PATA directly and such a low level conversion should be transparent to the motherboard and BIOS - in case the BIOS doesn't support SATA. And, for my motherboard, it sure doesn't. Does anyone ever used such a kind of adapter to support a boot drive? Any success sorry?

    Read the article

  • I found a some bad sectors with chkdsk. Should I be worried?

    - by mottalrd
    Yesterday I found a corrupted file in my external usb drive. Since I am using the drive quite often (I am running my vms over there) I decided to run the chkdsk on it This is the result 488384000 KB of total space on disk. 351202364 KB in 1042390 file. 489920 KB in 81101 indexes. 16 KB in damaged sectors. 1204584 KB in use. 65536 KB used from the registry. 135487116 KB available on disk. therefore it has found 16KB of damaged sectors. Now the file is recovered Should I be worried about the HD and run chkdsk periodically from now on?

    Read the article

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >