self service - Page 152

Metamorphic generator

- by user222094

I am trying to find references about different designs of metamorphic generators can someone point me to the right direction. I have gone through some papers in ACM but couldn't find what I am looking for.

Read the article

Getting WCF Services in a Silverlight solution to play nice on deployment

- by brendonpage

I have come across 2 issues with deploying WCF services in a Silverlight solution, admittedly the one is more of a hiccup, and only occurs if you take the easy way out and reference your services through visual studio. The First Issue This occurs when you deploy your WFC services to an IIS server. When browse to the services using your web browser, you are greeted with “This collection already contains an address with scheme http. There can be at most one address per scheme in this collection.”. When you make a call to this service from your Silverlight application, you get the extremely helpful “NotFound” error, this error message can be found in the error property of the event arguments on the complete event handler for that call. As it did with me this will leave most people scratching their head, because the very same services work just fine on the ASP.NET Development Web Server and on my local IIS server. Now I’m no server/hosting/IIS expert so I did a bit of searching when I first encountered this issue. I found out this happens because IIS supports multiple address bindings per protocol (http/https/ftp … etc) per web site, but WCF only supports binding to one address per protocol. This causes a problem when the WCF service is hosted on a site with multiple address bindings, because IIS provides all of the bindings to the host factory when running the service. While this problem occurs mainly on shared hosting solutions, it is not limited to shared hosting, it just seems like all shared hosting providers setup sites on their servers with multiple address bindings. For interests sake I added functionality to the example project attached to this post to dump the addresses given to the WCF service by IIS into a log file. This was the output on the shared hosting solution I use: http://mydomain.co.za/Services/TestService.svc http://www.mydomain.co.za/Services/TestService.svc http://mydomain-co-za.win13.wadns.net/Services/TestService.svc http://win13/Services/TestService.svc As you can see all these addresses are for the http protocol, which is where it all goes wrong for WCF. Fixes for the First Issue There are a few ways to get around this. The first being the easiest, target .NET 4! Yes that's right in .NET 4 WCF services support multiple addresses per protocol. This functionality is enabled by an option, which is on by default if you create a new project, you will need to turn on if you are upgrading to .NET 4. To do this set the multipleSiteBindingsEnabled property of the serviceHostingEnviroment tag in the web.config file to true, as shown below: <system.serviceModel> <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> Beware this ONLY works in .NET 4, so if you don’t have a server with .NET 4 installed on that you can deploy to, you will need to employ one of the other work a rounds. The second option will work for .NET 3.5 & 4. For this option all you need to do is modify the web.config file and add baseAddressPrefixFilters to the serviceHostingEnviroment tag as shown below: <system.serviceModel> <serviceHostingEnvironment> <baseAddressPrefixFilters> <add prefix="http://www.mydomain.co.za"/> </baseAddressPrefixFilters> </serviceHostingEnvironment> </system.serviceModel> These will be used to filter the list of base addresses that IIS provides to the host factory. When specifying these prefix filters be sure to specify filters which will only allow 1 result through, otherwise the entire exercise will be pointless. There is however a problem with this work a round, you are only allowed to specify 1 prefix filter per protocol. Which means you can’t add filters for all your environments, this will therefore add to the list of things to do before deploying or switching dev machines. The third option is the one I currently employ, it will work for .NET 3, 3.5 & 4, although it is not needed for .NET 4. For this option you create a custom host factory which inherits from the ServiceHostFactory class. In the implementation of the ServiceHostFactory you employ logic to figure out which of the base addresses, that are give by IIS, to use when creating the service host. The logic you use to do this is completely up to you, I have seen quite a few solutions that simply statically reference an index from the list of base addresses, this works for most situations but falls short in others. For instance, if the order of the base addresses where to change, it might end up returning an address that only resolves on the servers local network, like the last one in the example I gave at the beginning. Another instance, if a request comes in on a different protocol, like https, you will be creating the service host using an address which is on the incorrect protocol, like http. To reliably find the correct address to use, I use the address that the service was requested on. To accomplish this I use the HttpContext, which requires the service to operate with AspNetCompatibilityRequirements set on. If for some reason running you services with AspNetCompatibilityRequirements on isn’t an option, you can still use this method, you will just have to come up with your own logic for selecting the correct address. First you will need to enable AspNetCompatibilityRequirements for your hosting environment, to do this you will need to set it to true in the web.config file as shown below: <system.serviceModel> <serviceHostingEnvironment AspNetCompatibilityRequirements="true" /> </system.serviceModel> You will then need to mark any services that are going to use the custom host factory, to allow AspNetCompatibilityRequirements, as shown below: [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class TestService { } Now for the custom host factory, this is where the logic lives that selects the correct address to create service host with. The one i use is shown below: public class CustomHostFactory : ServiceHostFactory { protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) { // // Compose a prefix filter based on the requested uri // string prefixFilter = HttpContext.Current.Request.Url.Scheme + "://" + HttpContext.Current.Request.Url.DnsSafeHost; if (!HttpContext.Current.Request.Url.IsDefaultPort) { prefixFilter += ":" + HttpContext.Current.Request.Url.Port.ToString() + "/"; } // // Find a base address that matches the prefix filter // foreach (Uri baseAddress in baseAddresses) { if (baseAddress.OriginalString.StartsWith(prefixFilter)) { return new ServiceHost(serviceType, baseAddress); } } // // Throw exception if no matching base address was found // throw new Exception("Custom Host Factory: No base address matching '" + prefixFilter + "' was found."); } } The most important line in the custom host factory is the one that returns a new service host. This has to return a service host that specifies only one base address per protocol. Since I filter by the address the request came on in, I only need to create the service host with one address, since this address will always be of the correct protocol. Now you have a custom host factory you have to tell your services to use it. To do this you view the markup of the service by right clicking on it in the solution explorer and choosing “View Markup”. Then you add/set the value of the Factory property to the full namespace path of you custom host factory, as shown below. And that is it done, the service will now use the specified custom host factory. The Second Issue As I mentioned earlier this issue is more of a hiccup, but I thought worthy of a mention so I included it. This issue only occurs when you add a service reference to a Silverlight project. Visual Studio will generate a lot of code for you, part of that generated code is the ServiceReferences.ClientConfig file. This file stores the endpoint configuration that is used when accessing your services using the generated proxy classes. Here is what that file looks like: <configuration> <system.serviceModel> <bindings> <customBinding> <binding name="CustomBinding_TestService"> <binaryMessageEncoding /> <httpTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" /> </binding> <binding name="CustomBinding_BrokenService"> <binaryMessageEncoding /> <httpTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" /> </binding> </customBinding> </bindings> <client> <endpoint address="http://localhost:49347/services/TestService.svc" binding="customBinding" bindingConfiguration="CustomBinding_TestService" contract="TestService.TestService" name="CustomBinding_TestService" /> <endpoint address="http://localhost:49347/Services/BrokenService.svc" binding="customBinding" bindingConfiguration="CustomBinding_BrokenService" contract="BrokenService.BrokenService" name="CustomBinding_BrokenService" /> </client> </system.serviceModel> </configuration> As you will notice the addresses for the end points are set to the addresses of the services you added the service references from, so unless you are adding the service references from your live services, you will have to change these addresses before you deploy. This is little more than an annoyance really, but it adds to the list of things to do before you can deploy, and if left unchecked that list can get out of control. Fix for the Second Issue The way you would usually access a service added this way is to create an instance of the proxy class like so: BrokenServiceClient proxy = new BrokenServiceClient(); Closer inspection of these generated proxy classes reveals that there are a few overloaded constructors, one of which allows you to specify the end point address to use when creating the proxy. From here all you have to do is come up with some logic that will provide you with the relative path to your services. Since my WCF services are usually hosted in the same project as my Silverlight app I use the class shown below: public class ServiceProxyHelper { /// <summary> /// Create a broken service proxy /// </summary> /// <returns>A broken service proxy</returns> public static BrokenServiceClient CreateBrokenServiceProxy() { Uri address = new Uri(Application.Current.Host.Source, "../Services/BrokenService.svc"); return new BrokenServiceClient("CustomBinding_BrokenService", address.AbsoluteUri); } } Then I will create an instance of the proxy class using my service helper class like so: BrokenServiceClient proxy = ServiceProxyHelper.CreateBrokenServiceProxy(); The way this works is “Application.Current.Host.Source” will return the URL to the ClientBin folder the Silverlight app is hosted in, the “../Services/BrokenService.svc” is then used as the relative path to the service from the ClientBin folder, combined by the Uri object this gives me the URL to my service. The “CustomBinding_BrokenService” is a reference to the end point configuration in the ServiceReferences.ClientConfig file. Yes this means you still need the ServiceReferences.ClientConfig file. All this is doing is using a different end point address than the one specified in the ServiceReferences.ClientConfig file, all the other settings form the ServiceReferences.ClientConfig file are still used when creating the proxy. I have uploaded an example project which covers the custom host factory solution from the first issue and everything from the second issue. I included the code to write a list of base addresses to a log file in my implementation of the custom host factory, this is not need for the custom host factory to function and can safely be removed. Download (WCFServicesDeploymentExample.zip)

Read the article

How can architects work with self-organizing Scrum teams?

- by Martin Wickman

An organization with a number of agile Scrum teams also has a small group of people appointed as "enterprise architects". The EA group acts as control and gatekeeper for quality and adherence to decisions. This leads to overlaps between the team decision and EA decisions. For instance, the team might want to use library X or want to use REST instead of SOAP, but the EA does not approve of that. Now, this can lead to frustration when team decisions are overruled. Taken far enough, it can potentially lead to a situation where the EA people "grabs" all power and the team ends up feeling demotivated and not very agile at all. The Scrum guides has this to say about it: Self-organizing: No one (not even the Scrum Master) tells the Development Team how to turn Product Backlog into Increments of potentially releasable functionality. Is that reasonable? Should the EA team be disbanded? Should the teams refuse or simply comply?

Read the article

How to self Motivate technically to put my ideas into execution or just getting a job at MNC like google or microsoft..

- by Demla Pawan

I mean, How to self Motivate to get a job at google or create another google in future. ,as there is no mentor who can guide me on this topic, so asked it here: I'm a Graduate in BE IT,but with less grades,with interest in learning new programming languages, but not yet done anything great like developed some system or anything. And I'm left with 2 more years to prove my worth to someone. So,is their a quick guide to start learning a language and then just go on implementing your ideas and it gets appreciated or I get a good Job ant Big MNC's. By the way, I just build one website for my one client and running my wordpress blog. And I had tried my hands on basic of C++,Java,JS,JSP,PHP,Ubuntu,web designing in past.

Read the article

What are some concise and comprehensive introductory guide to unit testing for a self-taught programmer [closed]

- by Superbest

I don't have much formal training in programming and I have learned most things by looking up solutions on the internet to practical problems I have. There are some areas which I think would be valuable to learn, but which ended up both being difficult to learn and easy to avoid learning for a self-taught programmer. Unit testing is one of them. Specifically, I am interested in tests in and for C#/.NET applications using Microsoft.VisualStudio.TestTools in Visual Studio 2010 and/or 2012, but I really want a good introduction to the principles so language and IDE shouldn't matter much. At this time I'm interested in relatively trivial tests for small or medium sized programs (development time of weeks or months and mostly just myself developing). I don't necessarily intend to do test-driven development (I am aware that some say unit testing alone is supposed to be for developing features in TDD, and not an assurance that there are no bugs in the software, but unit testing is often the only kind of testing for which I have resources). I have found this tutorial which I feel gave me a decent idea of what unit tests and TDD looks like, but in trying to apply these ideas to my own projects, I often get confused by questions I can't answer and don't know how to answer, such as: What parts of my application and what sorts of things aren't necessarily worth testing? How fine grained should my tests be? Should they test every method and property separately, or work with a larger scope? What is a good naming convention for test methods? (since apparently the name of the method is the only way I will be able to tell from a glance at the test results table what works in my program and what doesn't) Is it bad to have many asserts in one test method? Since apparently VS2012 reports only that "an Assert.IsTrue failed within method MyTestMethod", and if MyTestMethod has 10 Assert.IsTrue statements, it will be irritating to figure out why a test is failing. If a lot of the functionality deals with writing and reading data to/from the disk in a not-exactly trivial fashion, how do I test that? If I provide a bunch of files as input by placing them in the program's directory, do I have to copy those files to the test project's bin/Debug folder now? If my program works with a large body of data and execution takes minutes or more, should my tests have it do the whole use all of the real data, a subset of it, or simulated data? If latter, how do I decide on the subset or how to simulate? Closely related to the previous point, if a class is such that its main operation happens in a state that is arrived to by the program after some involved operations (say, a class makes calculations on data derived from a few thousands of lines of code analyzing some raw data) how do I test just that class without inevitably ending up testing that class and all the other code that brings it to that state along with it? In general, what kind of approach should I use for test initialization? (hopefully that is the correct term, I mean preparing classes for testing by filling them in with appropriate data) How do I deal with private members? Do I just suck it up and assume that "not public = shouldn't be tested"? I have seen people suggest using private accessors and reflection, but these feel like clumsy and unsuited for regular use. Are these even good ideas? Is there anything like design patterns concerning testing specifically? I guess the main themes in what I'd like to learn more about are, (1) what are the overarching principles that should be followed (or at least considered) in every testing effort and (2) what are popular rules of thumb for writing tests. For example, at one point I recall hearing from someone that if a method is longer than 200 lines, it should be refactored - not a universally correct rule, but it has been quite helpful since I'd otherwise happily put hundreds of lines in single methods and then wonder why my code is so hard to read. Similarly I've found ReSharpers suggestions on member naming style and other things to be quite helpful in keeping my codebases sane. I see many resources both online and in print that talk about testing in the context of large applications (years of work, 10s of people or more). However, because I've never worked on such large projects, this context is very unfamiliar to me and makes the material difficult to follow and relate to my real world problems. Speaking of software development in general, advice given with the assumptions of large projects isn't always straightforward to apply to my own, smaller endeavors. Summary So my question is: What are some resources to learn about unit testing, for a hobbyist, self-taught programmer without much formal training? Ideally, I'm looking for a short and simple "bible of unit testing" which I can commit to memory, and then apply systematically by repeatedly asking myself "is this test following the bible of testing closely enough?" and then amending discrepancies if it doesn't.

Read the article

Send parameters to a web service.

- by Alejandra Meraz

Before I start: I'm programming for Iphone, using objective C. I have already implemented a call to a web service function using NSURLRequest and NSURLConnection. The function then returns a XML with the info I need. The code is as follows: NSURL *url = [NSURL URLWithString:@"http://myWebService/function"]; NSMutableURLRequest theRequest = [[NSMutableURLRequest alloc] initWithURL:url]; NSURLConnection theConnection = [[NSURLConnection alloc] initWithRequest:theRequest delegate:self]; i also implemented the methods didRecieveResponse didRecieveAuthenticationChallenge didRecievedData didFailWithError connectionDidFinishLoading. And it works perfectly. Now I need to send 2 parameters to the function: "location" and "module". I tried using the following modification: NSMutableURLRequest theRequest = [[NSMutableURLRequest alloc] initWithURL:url]; [theRequest setValue:@"USA" forHTTPHeaderField:@"location"]; [theRequest setValue:@"DEVELOPMENT" forHTTPHeaderField:@"module"]; NSURLConnection theConnection = [[NSURLConnection alloc] initWithRequest:theRequest delegate:self]; But it doesn't seem to work. I'm doing something wrong? is there a way to know if I'm using the wrong names for the parameters (as maybe it is "Location" or "LOCATION" or it doesn't matter?)? or a way to know which parameters is the function waiting for... Extra info: I don't have access to the source of the web service so I can't modify it. But I can access the WSDL. The person who made the function say is all there... but I can't make any sense of it .< Any help would be appreciated. :)

Read the article

Multiple, Simultaneous Factories and Protocols in Twisted: Same Service, Different Ports

- by RichardCroasher

Greetings, Forum. I'm working on a program in Python that uses Twisted to manage networking. The basis of this program is a TCP service that is to listen for connections on multiple ports. However, instead of using one Twisted factory to handle a protocol object for each port, I am trying to use a separate factory for each port. The reason for this is to force a separation among the groups of clients connecting to the different ports. Unfortunately, it appears that this architecture isn't quite working: clients that connect to one port appear to be available among all the factories (e.g., the protocol class used by each factory includes a 'self.factory.clients.append (self)' statement...instead of adding a given client to just the factory for a particular port, the client is added to all factories), and whenever I shutdown service on one port the listeners on all ports also stop. I've been working with Twisted for a short while, and fear I simply don't fully understand how its factory classes are managed. My question is: is it simply not possible to have multiple, simultaneous instances of the same factory and same protocol in use across different ports (without these instances stepping on each other's toes)?

Read the article

receiving signal: EXC_BAD_ACCESS in web service call function

- by murali

I'm new to iPhone development. I'm using xcode 4.2. When I click on the save button, I'm getting values from the html page and my web service is processing them, and then I get the error: program received signal: EXC_BAD_ACCESS in my web service call function. Here is my code: NSString *val=[WebviewObj stringByEvaluatingJavaScriptFromString:@"save()"]; NSLog(@"return value:: %@",val); [adict setObject:[NSString stringWithFormat:@"%i",userid5] forKey:@"iUser_Id" ]; [adict setObject:[[val componentsSeparatedByString:@","]objectAtIndex:0] forKey:@"vImage_Url"]; [adict setObject:[[val componentsSeparatedByString:@","]objectAtIndex:1] forKey:@"IGenre_Id"]; [adict setObject:[[val componentsSeparatedByString:@","]objectAtIndex:2] forKey:@"vTrack_Name"]; [adict setObject:[[val componentsSeparatedByString:@","]objectAtIndex:3] forKey:@"vAlbum_Name"]; [adict setObject:[[val componentsSeparatedByString:@","]objectAtIndex:4] forKey:@"vMusic_Url"]; [adict setObject:[[val componentsSeparatedByString:@","]objectAtIndex:5] forKey:@"iTrack_Duration_min"]; [adict setObject:[[val componentsSeparatedByString:@","]objectAtIndex:6] forKey:@"iTrack_Duration_sec"]; [adict setObject:[[val componentsSeparatedByString:@","]objectAtIndex:7] forKey:@"vDescription"]; NSLog(@"dict==%@",[adict description]); NSString *URL2= @"http://184.164.156.55/Music/Track.asmx/AddTrack"; obj=[[UrlController alloc]init]; obj.URL=URL2; obj.InputParameters = adict; [obj WebserviceCall]; obj.delegate= self; //this is my function..it is working for so many function calls -(void)WebserviceCall{ webData = [[NSMutableData alloc] init]; NSMutableURLRequest *urlRequest = [[ NSMutableURLRequest alloc ] initWithURL: [ NSURL URLWithString: URL ] ]; NSString *httpBody = @""; for(id key in InputParameters) { if([httpBody length] == 0){ httpBody=[httpBody stringByAppendingFormat:@"&%@=%@",key,[InputParameters valueForKey:key]]; } else{ httpBody=[httpBody stringByAppendingFormat:@"&%@=%@",key,[InputParameters valueForKey:key]]; } } httpBody = [httpBody stringByAppendingFormat:httpBody];//Here i am getting EXC_BAD_ACCESS [urlRequest setHTTPMethod: @"POST" ]; [urlRequest setHTTPBody:[httpBody dataUsingEncoding:NSUTF8StringEncoding]]; [urlRequest setValue:@"application/x-www-form-urlencoded" forHTTPHeaderField:@"content-type"]; NSURLConnection *theConnection = [[NSURLConnection alloc] initWithRequest:urlRequest delegate:self]; } Can any one help me please? thanks in advance

Read the article

Nagios notifications definitions

- by Colin

I am trying to monitor a web server in such a way that I want to search for a particular string on a page via http. The command is defined in command.cfg as follows # 'check_http-mysite command definition' define command { command_name check_http-mysite command_line /usr/lib/nagios/plugins/check_http -H mysite.example.com -s "Some text" } # 'notify-host-by-sms' command definition define command { command_name notify-host-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$ :Host$HOSTALIAS$ is $HOSTSTATE$ ($OUTPUT$)" } # 'notify-service-by-sms' command definition define command { command_name notify-service-by-sms command_line /usr/bin/send_sms $CONTACTPAGER$ "Nagios - $NOTIFICATIONTYPE$: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ ($OUTPUT$)" } Now if nagios doesn't find "Some text" on the home page mysite.example.com, nagios should notify a contact via sms through the Clickatell http API which I have a script for that that I have tested and found that it works fine. Whenever I change the command definition to search for a string which is not on the page, and restart nagios, I can see on the web interface that the string was not found. What I don't understand is why isn't the notification sent though I have defined the host, hostgroup, contact, contactgroup and service and so forth. What I'm I missing, these are my definitions, In my web access through the cgi I can see that I have notifications have been defined and enabled though I don't get both email and sms notifications during hard status changes. host.cfg define host { use generic-host host_name HAL alias IBM-1 address xxx.xxx.xxx.xxx check_command check_http-mysite } *hostgroups_nagios2.cfg* # my website define hostgroup{ hostgroup_name my-servers alias All My Servers members HAL } *contacts_nagios2.cfg* define contact { contact_name colin alias Colin Y service_notification_period 24x7 host_notification_period 24x7 service_notification_options w,u,c,r,f,s host_notification_options d,u,r,f,s service_notification_commands notify-service-by-email,notify-service-by-sms host_notification_commands notify-host-by-email,notify-host-by-sms email [email protected] pager +254xxxxxxxxx } define contactgroup{ contactgroup_name site_admin alias Site Administrator members colin } *services_nagios2.cfg* # check for particular string in page via http define service { hostgroup_name my-servers service_description STRING CHECK check_command check_http-mysite use generic-service notification_interval 0 ; set > 0 if you want to be renotified contacts colin contact_groups site_admin } Could someone please tell me where I'm going wrong. Here are the generic-host and generic-service definitions *generic-service_nagios2.cfg* # generic service template definition define service{ name generic-service ; The 'name' of this service template active_checks_enabled 1 ; Active service checks are enabled passive_checks_enabled 1 ; Passive service checks are enabled/accepted parallelize_check 1 ; Active service checks should be parallelized (disabling this can lead to major performance problems) obsess_over_service 1 ; We should obsess over this service (if necessary) check_freshness 0 ; Default is to NOT check service 'freshness' notifications_enabled 1 ; Service notifications are enabled event_handler_enabled 1 ; Service event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts notification_interval 0 ; Only send notifications on status change by default. is_volatile 0 check_period 24x7 normal_check_interval 5 retry_check_interval 1 max_check_attempts 4 notification_period 24x7 notification_options w,u,c,r contact_groups site_admin register 0 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL SERVICE, JUST A TEMPLATE! } *generic-host_nagios2.cfg* define host{ name generic-host ; The name of this host template notifications_enabled 1 ; Host notifications are enabled event_handler_enabled 1 ; Host event handler is enabled flap_detection_enabled 1 ; Flap detection is enabled failure_prediction_enabled 1 ; Failure prediction is enabled process_perf_data 1 ; Process performance data retain_status_information 1 ; Retain status information across program restarts retain_nonstatus_information 1 ; Retain non-status information across program restarts max_check_attempts 10 notification_interval 0 notification_period 24x7 notification_options d,u,r contact_groups site_admin register 1 ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL HOST, JUST A TEMPLATE! }

Read the article

Calling XAI Inbound Services from Oracle BI Publisher

- by ACShorten

Note: This technique requires Oracle BI Publisher 1.1.3.4.1 which supports Service Complex Types. Web Services require credentials for authentication. Note: The deafults for the product installation are used in this article. If your site uses alternative values then substitute those alternatives where applicable. Note: Examples shown in this article are examples for illustrative purposes only. When building a report in Oracle BI Publisher it may be necessary to call an XAI Inbound Service to get information via the object rather than directly calling the database tables for various reasons: The CLOB fields used in the Object are accessible for a report. Note: CLOB fields cannot be used as criteria in the current release. Objects can take advantage of algorithms to format or calculate additional data that is not stored in the database directly. For example, Information format strings can automatically generated by the object which gives consistent information between a report and the online screens. To use this facility the following process must be performed: Ensure that the product group, cisusers by default, is enabled for the SPLServiceBean in the console. This allows BI Publisher access to call Web Services directly. To ensure this follow the instructions below: Logon to the Oracle WebLogic server console using an appropriate administrator account. By default the user system or weblogic is provided for this purpose. Navigate to the Security Realms section and select your configured realm. This is set to myrealm by default. In the Roles and Policies section, expand the SPLService section of the Deployments option to reveal the SPLServiceBean roles. If there is no role associated with the SPLServiceBean, create a new EJB role and specify the cisusers role, by default. For example: Add a Role Condition to the role just created, with a Predicate List of Group and specify cisusers as the Group Argument Name. For example: Save all your changes. The XAI Inbound Services to be used by BI Publisher must be defined prior to using the interface. Refer to the XAI Best Practices (Doc Id: 942074.1) from My Oracle Support or via the online help for more information about this process. Inside BI Publisher create your report, according to the BI Publisher documentation. When specifying the dataset, under the Data Model Report option, specify the following to use an XAI Inbound Service as a data source: Parameter Comment Type Web Service Complex Type true Username Any valid user name within the product. This user MUST have security access to the objects referenced in the XAI Inbound Service Password Authentication password for Username Timeout Timeout, in seconds, set for the Web Service call. For example 60 seconds. WSDL URL Use the WSDL URL on the XAI Inbound Service definition as your WSDL URL. It will be in the following format by default:http://<host>:<port>/<server>/XAIApp/xaiserver/<service>?WSDLwhere: <host> - Host Name of Web Application Server <port> - Port allocated to Web Application Server for product access <server> - Server context for server <service> - XAI Inbound Service Name Note: For customers using secure transmission should substitute https instead of http and use the HTTPS port allocated to the product at installation time. Web Service Select the name of the service that shows in the drop-down menu. If no service name shows up, it means that Publisher could not establish a connection with the server or WSDL name provided in the above URL in order to get the service name. See BI Publisher server log for more information. Method Select the name of the Method that shows in the drop-down menu. A method name should show in the Method drop-down menu once the Web Service name is selected. For example: Additionally, filters can be used from the Web Service that can be generated, required or optional, from the WSDL in the Parameter List. For example:

Read the article

NSURLConnection not "firing" until UITableView scrolls..

- by Simon

Hi, I've got a UITableView that loads an image asynchronously and places it in the UITableViewCell once it's loaded (I'm using almost the exact same code as in the "LazyTableImages" tutorial). This works fine for all images when I scroll the table, but it's not loading the images that are first in the view. The code is definitely working fine as the class that actually sends the NSURLConnection request is being called correctly (I added an NSLog and it reached the console). The NSURLConnection is just not calling the delegate methods (didReceiveData, connectionDidFinishLoading, etc). Here's my code: HomeController.m - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithStyle:UITableViewCellStyleDefault reuseIdentifier:CellIdentifier] autorelease]; NSArray *feed = [feeds objectAtIndex: indexPath.row]; /** * Name of person */ [...] /** * Feed entry */ [...] /** * Misc work */ [...] } FeedRecord *feedRecord = [self.entries objectAtIndex:indexPath.row]; if( !feedRecord.image ) { if (self.table.dragging == NO && self.table.decelerating == NO) { [self startIconDownload:feedRecord forIndexPath:indexPath]; } cell.imageView.image = [UIImage imageNamed:@"Placeholder.png"]; } return cell; } - (void)startIconDownload:(FeedRecord *)feedRecord forIndexPath:(NSIndexPath *)indexPath { IconDownloader *iconDownloader = [imageDownloadsInProgress objectForKey:indexPath]; if (iconDownloader == nil) { iconDownloader = [[IconDownloader alloc] init]; iconDownloader.feedRecord = feedRecord; iconDownloader.indexPathInTableView = indexPath; iconDownloader.delegate = self; [imageDownloadsInProgress setObject:iconDownloader forKey:indexPath]; [iconDownloader startDownload]; [iconDownloader release]; } } IconDownload.m #import "IconDownloader.h" #import "FeedRecord.h" #define kAppIconHeight 48 @implementation IconDownloader @synthesize feedRecord; @synthesize indexPathInTableView; @synthesize delegate; @synthesize activeDownload; @synthesize imageConnection; #pragma mark - (void)dealloc { [feedRecord release]; [indexPathInTableView release]; [activeDownload release]; [imageConnection cancel]; [imageConnection release]; [super dealloc]; } - (void)startDownload { NSLog(@"%@ %@",@"Started downloading", feedRecord.profilePicture); // this shows in log self.activeDownload = [NSMutableData data]; // alloc+init and start an NSURLConnection; release on completion/failure NSURLConnection *conn = [[NSURLConnection alloc] initWithRequest: [NSURLRequest requestWithURL: [NSURL URLWithString:feedRecord.profilePicture]] delegate:self]; self.imageConnection = conn; NSLog(@"%@",conn); // this shows in log [conn release]; } - (void)cancelDownload { [self.imageConnection cancel]; self.imageConnection = nil; self.activeDownload = nil; } #pragma mark - #pragma mark Download support (NSURLConnectionDelegate) - (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data { NSLog(@"%@ %@",@"Got data for", feedRecord.profilePicture); [self.activeDownload appendData:data]; } - (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error { NSLog(@"%@",@"Fail!"); // Clear the activeDownload property to allow later attempts self.activeDownload = nil; // Release the connection now that it's finished self.imageConnection = nil; } - (void)connectionDidFinishLoading:(NSURLConnection *)connection { NSLog(@"%@ %@",@"Done", feedRecord.profilePicture); // Set appIcon and clear temporary data/image UIImage *image = [[UIImage alloc] initWithData:self.activeDownload]; self.feedRecord.image = image; self.activeDownload = nil; [image release]; // Release the connection now that it's finished self.imageConnection = nil; NSLog(@"%@ %@",@"Our delegate is",delegate); // call our delegate and tell it that our icon is ready for display [delegate feedImageDidLoad:self.indexPathInTableView]; } @end Has anyone else experienced anything like this or can identify an issue with my code? Thanks!

Read the article

UIView, UIScrollView and UITextFields problem calling Method

- by Jeff Groby

I have a view with several embedded UITextFields, this UIView is subordinated to a UIScrollView in IB. Each text field is supposed to invoke a method called updateText defined in the viewcontroller implementation file when the user is done editing the field. For some reason, the method updateText never gets invoked. Anyone have any ideas how to go about fixing this? The method fired off just fine when the UIScrollView was not present in the project but the keyboard would cover the text fields during input, which was annoying. Now my textfields move up above the keyboard when it appears, but won't fire off the method when done editing. Here is my implementation file: #import "MileMarkerViewController.h" @implementation MileMarkerViewController @synthesize scrollView,milemarkerLogDate,milemarkerDesc,milemarkerOdobeg,milemarkerOdoend,milemarkerBusiness,milemarkerPersonal,milemarker; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Initialization code } return self; } - (BOOL) textFieldShouldReturn: (UITextField*) theTextField { return [theTextField resignFirstResponder]; } - (void)viewDidLoad { [super viewDidLoad]; [[NSNotificationCenter defaultCenter] addObserver: self selector: @selector(keyboardWasShown:) name: UIKeyboardDidShowNotification object: nil]; [[NSNotificationCenter defaultCenter] addObserver: self selector: @selector(keyboardWasHidden:) name: UIKeyboardDidHideNotification object: nil]; keyboardShown = NO; // 1 [scrollView setContentSize: CGSizeMake( 320, 480)]; // 2 } - (void)keyboardWasShown:(NSNotification*)aNotification { if (keyboardShown) return; NSDictionary* info = [aNotification userInfo]; // Get the size of the keyboard. NSValue* aValue = [info objectForKey:UIKeyboardBoundsUserInfoKey]; CGSize keyboardSize = [aValue CGRectValue].size; // Resize the scroll view (which is the root view of the window) CGRect viewFrame = [scrollView frame]; viewFrame.size.height -= keyboardSize.height; scrollView.frame = viewFrame; // Scroll the active text field into view. CGRect textFieldRect = [activeField frame]; [scrollView scrollRectToVisible:textFieldRect animated:YES]; keyboardShown = YES; } - (void)keyboardWasHidden:(NSNotification*)aNotification { NSDictionary* info = [aNotification userInfo]; // Get the size of the keyboard. NSValue* aValue = [info objectForKey:UIKeyboardBoundsUserInfoKey]; CGSize keyboardSize = [aValue CGRectValue].size; // Reset the height of the scroll view to its original value CGRect viewFrame = [scrollView frame]; viewFrame.size.height += keyboardSize.height; [scrollView scrollRectToVisible:CGRectMake(0, 0, 1, 1) animated:YES]; scrollView.frame = viewFrame; keyboardShown = NO; } - (void)textFieldDidBeginEditing:(UITextField *)textField { activeField = textField; } - (void)textFieldDidEndEditing:(UITextField *)textField { activeField = nil; } - (IBAction)updateText:(id) sender { NSLog(@"You just entered: %@",self.milemarkerLogDate.text); self.milemarker.logdate = self.milemarkerLogDate.text; self.milemarker.desc = self.milemarkerDesc.text; self.milemarker.odobeg = self.milemarkerOdobeg.text; self.milemarker.odoend = self.milemarkerOdoend.text; self.milemarker.business = self.milemarkerBusiness.text; self.milemarker.personal = self.milemarkerPersonal.text; NSLog(@"Original textfield is set to: %@",self.milemarker.logdate); [self.milemarker updateText]; } - (void)didReceiveMemoryWarning { // Releases the view if it doesn't have a superview. [super didReceiveMemoryWarning]; // Release any cached data, images, etc that aren't in use. } - (void)dealloc { [super dealloc]; } @end

Read the article

Calling popToRootViewControllerAnimated causing crash. How should I be doing this?

- by Lewis42

The app is for taking body measurements. The user can say I want to measure: legs, arms and neck, in the settings tab and in the main tab there is a view which loops round to take each measurement. This is achieved like so: i have tab controller the first tab has a navigation controller the first view controller on the storyboard and has one segue to itself the board loops round until it has all the measurements then it segues to a different controller the problem is: if the user changes which measurements they are taking in the settings tab, the first tab needs to completely reload, as if the app was just starting up, clearing down the whole nav stack etc. at the moment the tab controller calls popToRootViewControllerAnimated on the navigation controller in the measurements tab, but this is causing a crash. Each screen has a slider control and a call to titleForRow:forComponent: is being called on a deleted view causing it to crash. What am I doing wrong?! Here's the tab bar controller code // TabBarController.m // #import "TabBarController.h" #import "TodaysMeasurementObject.h" #import "AppDelegateProtocol.h" #import "AddMeasurementViewController.h" #import "ReadPerson.h" #import "AppDelegate.h" @interface TabBarController () <UITabBarControllerDelegate> @end @implementation TabBarController bool resetWizardView = false; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]; if (self) { } return self; } - (void)viewDidLoad { [super viewDidLoad]; // Do any additional setup after loading the view. self.delegate = self; [[UIDevice currentDevice] beginGeneratingDeviceOrientationNotifications]; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(orientationChanged:) name:UIDeviceOrientationDidChangeNotification object:nil]; [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(measurementsSettingsUpdated:) name:@"MeasurementsSettingsUpdated" object:nil]; } - (void) measurementsSettingsUpdated:(NSNotification *) notification { // UINavigationController *navigationController = [self.viewControllers objectAtIndex:0]; // AddMeasurementViewController *addMeasurement = [[AddMeasurementViewController alloc] init]; // [navigationController setViewControllers: [[NSArray alloc] initWithObjects:addMeasurement, nil]]; resetWizardView = YES; } - (void) viewDidAppear:(BOOL)animated { if (![ReadPerson userHasRecords]) { [self setSelectedIndex:3]; } } - (void)orientationChanged:(NSNotification *)notification { // We must add a delay here, otherwise we'll swap in the new view // too quickly and we'll get an animation glitch [self performSelector:@selector(showGraphs) withObject:nil afterDelay:0]; } - (void)showGraphs { UIDeviceOrientation deviceOrientation = [UIDevice currentDevice].orientation; if (deviceOrientation == UIDeviceOrientationLandscapeLeft && !isShowingLandscapeView) { [self performSegueWithIdentifier: @"toGraph" sender: self]; isShowingLandscapeView = YES; } else if (deviceOrientation != UIDeviceOrientationLandscapeLeft && isShowingLandscapeView) { [self dismissModalViewControllerAnimated:YES]; isShowingLandscapeView = NO; } } - (void)viewDidUnload { [super viewDidUnload]; // Release any retained subviews of the main view. } - (void)dealloc { [[NSNotificationCenter defaultCenter] removeObserver:self]; [[UIDevice currentDevice] endGeneratingDeviceOrientationNotifications]; } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { if(interfaceOrientation == UIInterfaceOrientationLandscapeRight) { [self performSegueWithIdentifier: @"toGraph" sender: self]; } return false; } - (void)tabBarController:(UITabBarController *)tabBarController didSelectViewController:(UIViewController *)viewController { int tbi = tabBarController.selectedIndex; if (tbi == 0) { [[viewController view] setNeedsDisplay]; if (resetWizardView) { [(UINavigationController*)[self.viewControllers objectAtIndex:0] popToRootViewControllerAnimated: NO]; // ******* POP CALLED HERE ****** resetWizardView = false; } } } - (TodaysMeasurementObject*) theAppDataObject { id<AppDelegateProtocol> theDelegate = (id<AppDelegateProtocol>) [UIApplication sharedApplication].delegate; TodaysMeasurementObject* theDataObject; theDataObject = (TodaysMeasurementObject*) theDelegate.theAppDataObject; return theDataObject; } - (BOOL)shouldAutorotate { return NO; } - (NSUInteger)supportedInterfaceOrientations { return UIInterfaceOrientationMaskPortrait; } @end UPDATED - (void) measurementsSettingsUpdated:(NSNotification *) notification { NSMutableArray *viewControllers = [[NSMutableArray alloc] initWithArray: self.viewControllers]; UINavigationController *navigationController = [viewControllers objectAtIndex:0]; AddMeasurementViewController *addMeasurement = [[AddMeasurementViewController alloc] init]; [navigationController setViewControllers: [[NSArray alloc] initWithObjects:addMeasurement, nil]]; [viewControllers setObject:navigationController atIndexedSubscript:0]; self.viewControllers = viewControllers; } and removed the code from - tabBarController:didSelectViewController: but still the same error. I think the problem is that it's trying to get a value for the slide control after the view has been deleted. But some part of the view must still be alive...? Anyway to kill that off? Or leave it all alive??

Read the article

Why do I get a connection error / timeout when using python suds to connect to Microsoft CRM?

- by Chris R

When I try to connect to an MS CRM web service using suds/python-ntlm, I am getting a timeout on requests. However, the code that I'm trying to replace -- which calls out to the cURL command line app to do the same call -- succeeds. Clearly something is different in the way that cURL is sending the command data, but I'll be damned if I know what the difference is. Below are the full details of the various calls. Anyone got any tips? Here's the code that is making the request, followed by the output. The cURL command code is below that, and its response follows. Hosts, users, and passwords have been changed to protect the innocent, of course. wsdl_url = 'https://client.service.host/MSCrmServices/2007/MetadataService.asmx?WSDL' username = r'domain\user.name' password = 'userpass' from suds.transport.https import WindowsHttpAuthenticated from suds.client import Client import logging logging.basicConfig(level=logging.INFO) logging.getLogger('suds.client').setLevel(logging.DEBUG) logging.getLogger('suds.transport').setLevel(logging.DEBUG) ntlmTransport = WindowsHttpAuthenticated(username=username, password=password) metadata_client = Client(wsdl_url, transport=ntlmTransport) request = metadata_client.factory.create('RetrieveAttributeRequest') request.MetadataId = '00000000-0000-0000-0000-000000000000' request.EntityLogicalName = 'opportunity' request.LogicalName = 'new_typeofcontact' request.RetrieveAsIfPublished = 'false' attr = metadata_client.service.Execute(request) print attr Here's the output: DEBUG:suds.client:sending to (http://client.service.host/MSCrmServices/2007/MetadataService.asmx) message: <SOAP-ENV:Envelope xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://schemas.microsoft.com/crm/2007/WebServices" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP-ENV:Header/> <ns0:Body> <ns1:Execute> <ns1:Request xsi:type="ns1:RetrieveAttributeRequest"> <ns1:MetadataId>00000000-0000-0000-0000-000000000000</ns1:MetadataId> <ns1:EntityLogicalName>opportunity</ns1:EntityLogicalName> <ns1:LogicalName>new_typeofcontact</ns1:LogicalName> <ns1:RetrieveAsIfPublished>false</ns1:RetrieveAsIfPublished> </ns1:Request> </ns1:Execute> </ns0:Body> </SOAP-ENV:Envelope> DEBUG:suds.client:headers = {'SOAPAction': u'"http://schemas.microsoft.com/crm/2007/WebServices/Execute"', 'Content-Type': 'text/xml'} DEBUG:suds.transport.http:sending: URL:http://client.service.host/MSCrmServices/2007/MetadataService.asmx HEADERS: {'SOAPAction': u'"http://schemas.microsoft.com/crm/2007/WebServices/Execute"', 'Content-Type': 'text/xml', 'Content-type': 'text/xml', 'Soapaction': u'"http://schemas.microsoft.com/crm/2007/WebServices/Execute"'} MESSAGE: <SOAP-ENV:Envelope xmlns:ns0="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://schemas.microsoft.com/crm/2007/WebServices" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP-ENV:Header/> <ns0:Body> <ns1:Execute> <ns1:Request xsi:type="ns1:RetrieveAttributeRequest"> <ns1:MetadataId>00000000-0000-0000-0000-000000000000</ns1:MetadataId> <ns1:EntityLogicalName>opportunity</ns1:EntityLogicalName> <ns1:LogicalName>new_typeofcontact</ns1:LogicalName> <ns1:RetrieveAsIfPublished>false</ns1:RetrieveAsIfPublished> </ns1:Request> </ns1:Execute> </ns0:Body> </SOAP-ENV:Envelope> ERROR: An unexpected error occurred while tokenizing input The following traceback may be corrupted or invalid The error message is: ('EOF in multi-line statement', (16, 0)) --------------------------------------------------------------------------- URLError Traceback (most recent call last) /Users/crose/projects/2366/crm/<ipython console> in <module>() /var/folders/nb/nbJAzxR1HbOppPcs6xO+dE+++TY/-Tmp-/python-67186icm.py in <module>() 19 request.LogicalName = 'new_typeofcontact' 20 request.RetrieveAsIfPublished = 'false' 21 ---> 22 attr = metadata_client.service.Execute(request) 23 print attr /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/client.pyc in __call__(self, *args, **kwargs) 537 return (500, e) 538 else: --> 539 return client.invoke(args, kwargs) 540 541 def faults(self): /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/client.pyc in invoke(self, args, kwargs) 596 self.method.name, timer) 597 timer.start() --> 598 result = self.send(msg) 599 timer.stop() 600 metrics.log.debug( /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/client.pyc in send(self, msg) 621 request = Request(location, str(msg)) 622 request.headers = self.headers() --> 623 reply = transport.send(request) 624 if retxml: 625 result = reply.message /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/transport/https.pyc in send(self, request) 62 def send(self, request): 63 self.addcredentials(request) ---> 64 return HttpTransport.send(self, request) 65 66 def addcredentials(self, request): /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/transport/http.pyc in send(self, request) 75 request.headers.update(u2request.headers) 76 log.debug('sending:\n%s', request) ---> 77 fp = self.u2open(u2request) 78 self.getcookies(fp, u2request) 79 result = Reply(200, fp.headers.dict, fp.read()) /Users/crose/virtualenv/advanis/lib/python2.6/site-packages/suds/transport/http.pyc in u2open(self, u2request) 116 return url.open(u2request) 117 else: --> 118 return url.open(u2request, timeout=tm) 119 120 def u2opener(self): /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in open(self, fullurl, data, timeout) 381 req = meth(req) 382 --> 383 response = self._open(req, data) 384 385 # post-process response /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in _open(self, req, data) 399 protocol = req.get_type() 400 result = self._call_chain(self.handle_open, protocol, protocol + --> 401 '_open', req) 402 if result: 403 return result /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in _call_chain(self, chain, kind, meth_name, *args) 359 func = getattr(handler, meth_name) 360 --> 361 result = func(*args) 362 if result is not None: 363 return result /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in http_open(self, req) 1128 1129 def http_open(self, req): -> 1130 return self.do_open(httplib.HTTPConnection, req) 1131 1132 http_request = AbstractHTTPHandler.do_request_ /System/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/urllib2.pyc in do_open(self, http_class, req) 1103 r = h.getresponse() 1104 except socket.error, err: # XXX what error? -> 1105 raise URLError(err) 1106 1107 # Pick apart the HTTPResponse object to get the addinfourl URLError: <urlopen error [Errno 60] Operation timed out> The cURL command is: /opt/local/bin/curl --ntlm -u "domain\user.name:userpass" -k -d @- -A "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; SV1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; InfoPath.1)" -H "Connection: Keep-Alive" -H "Content-Type: text/xml; charset=utf-8" -H "SOAPAction: http://schemas.microsoft.com/crm/2007/WebServices/Execute" https://client.service.host/MSCrmServices/2007/MetadataService.asmx The data that is piped to that cURL command: <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <soap:Header> <CrmAuthenticationToken xmlns="http://schemas.microsoft.com/crm/2007/WebServices"> <AuthenticationType xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes">0</AuthenticationType> <CrmTicket xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes"></CrmTicket> <OrganizationName xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes">CMIFS</OrganizationName> <CallerId xmlns="http://schemas.microsoft.com/crm/2007/CoreTypes">00000000-0000-0000-0000-000000000000</CallerId> </CrmAuthenticationToken> </soap:Header> <soap:Body> <Execute xmlns="http://schemas.microsoft.com/crm/2007/WebServices"> <Request xsi:type="RetrieveAttributeRequest"> <MetadataId>00000000-0000-0000-0000-000000000000</MetadataId> <EntityLogicalName>opportunity</EntityLogicalName> <LogicalName>new_typeofcontact</LogicalName> <RetrieveAsIfPublished>false</RetrieveAsIfPublished> </Request> </Execute> </soap:Body> </soap:Envelope> Here's the response: <?xml version="1.0" encoding="utf-8"?> <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <soap:Body> <ExecuteResponse xmlns="http://schemas.microsoft.com/crm/2007/WebServices"> <Response xsi:type="RetrieveAttributeResponse"> <AttributeMetadata xsi:type="PicklistAttributeMetadata"> <MetadataId>101346cf-a6af-4eb4-a4bf-9c3c6bbd6582</MetadataId> <SchemaName>New_TypeofContact</SchemaName> <LogicalName>new_typeofcontact</LogicalName> <EntityLogicalName>opportunity</EntityLogicalName> <AttributeType> <Value>Picklist</Value> </AttributeType>  </AttributeMetadata> </Response> </ExecuteResponse> </soap:Body> </soap:Envelope>

Read the article

b2Body moves without stopping

- by SentineL

I got a quite strange bug. It is difficult to explain it in two words, but i'll try to do this in short. My b2Body has restitution, friction, density, mass and collision group. I controlling my b2Body via setting linear velocity to it (called on every iteration): (void)moveToDirection:(CGPoint)direction onlyHorizontal:(BOOL)horizontal { b2Vec2 velocity = [controlledObject getBody]-GetLinearVelocity(); double horizontalSpeed = velocity.x + controlledObject.acceleration * direction.x; velocity.x = (float32) (abs((int) horizontalSpeed) < controlledObject.runSpeed ? horizontalSpeed : controlledObject.maxSpeed * direction.x); if (!horizontal) { velocity.y = velocity.y + controlledObject.runSpeed * direction.y; } [controlledObject getBody]->SetLinearVelocity(velocity); } My floor is static b2Body, it has as restitution, friction, density, mass and same collision group in some reason, I'm setting b2Body's friction of my Hero to zero when it is moving, and returning it to 1 when he stops. When I'm pushing run button, hero runs. when i'm releasing it, he stops. All of this works perfect. On jumping, I'm setting linear velocity to my Hero: (void)jump { b2Vec2 velocity = [controlledObject getBody]->GetLinearVelocity(); velocity.y = velocity.y + [[AppDel cfg] getHeroJumpVlelocity]; [controlledObject getBody]->SetLinearVelocity(velocity); } If I'll run, jump, and release run button, while he is in air, all will work fine. And here is my problem: If I'll run, jump, and continue running on landing (or when he goes from one static body to another: there is small fall, probably), Hero will start move, like he has no friction, but he has! I checked this via beakpoints: he has friction, but I can move left of right, and he will never stop, until i'll jump (or go from one static body to another), with unpressed running button. I allready tried: Set friction to body on every iteration double-check am I setting friction to right fixture. set Linear Damping to Hero: his move slows down on gugged moveing. A little more code: I have a sensor and body fixtures in my hero: (void) addBodyFixture { b2CircleShape dynamicBox; dynamicBox.m_radius = [[AppDel cfg] getHeroRadius]; b2FixtureDef bodyFixtureDef; bodyFixtureDef.shape = &dynamicBox; bodyFixtureDef.density = 1.0f; bodyFixtureDef.friction = [[AppDel cfg] getHeroFriction]; bodyFixtureDef.restitution = [[AppDel cfg] getHeroRestitution]; bodyFixtureDef.filter.categoryBits = 0x0001; bodyFixtureDef.filter.maskBits = 0x0001; bodyFixtureDef.filter.groupIndex = 0; bodyFixtureDef.userData = [NSNumber numberWithInt:FIXTURE_BODY]; [physicalBody addFixture:bodyFixtureDef]; } (void) addSensorFixture { b2CircleShape sensorBox; sensorBox.m_radius = [[AppDel cfg] getHeroRadius] * 0.95; sensorBox.m_p.Set(0, -[[AppDel cfg] getHeroRadius] / 10); b2FixtureDef sensor; sensor.shape = &sensorBox; sensor.filter.categoryBits = 0x0001; sensor.filter.maskBits = 0x0001; sensor.filter.groupIndex = 0; sensor.isSensor = YES; sensor.userData = [NSNumber numberWithInt:FIXTURE_SENSOR]; [physicalBody addFixture:sensor]; } Here I'm tracking is hero in air: void FixtureContactListener::BeginContact(b2Contact* contact) { // We need to copy out the data because the b2Contact passed in // is reused. Squirrel *squirrel = (Squirrel *)contact->GetFixtureB()->GetBody()->GetUserData(); if (squirrel) { [squirrel addContact]; } } void FixtureContactListener::EndContact(b2Contact* contact) { Squirrel *squirrel = (Squirrel *)contact->GetFixtureB()->GetBody()->GetUserData(); if (squirrel) { [squirrel removeContact]; } } here is Hero's logic on contacts: - (void) addContact { if (contactCount == 0) [self landing]; contactCount++; } - (void) removeContact { contactCount--; if (contactCount == 0) [self flying]; if (contactCount <0) contactCount = 0; } - (void)landing { inAir = NO; acceleration = [[AppDel cfg] getHeroRunAcceleration]; [sprite stopAllActions]; (running ? [sprite runAction:[self runAction]] : [sprite runAction:[self standAction]]); } - (void)flying { inAir = YES; acceleration = [[AppDel cfg] getHeroAirAcceleration]; [sprite stopAllActions]; [self flyAction]; } here is Hero's moving logic: - (void)stop { running = NO; if (!inAir) { [sprite stopAllActions]; [sprite runAction:[self standAction]]; } } - (void)left { [physicalBody setFriction:0]; if (!running && !inAir) { [sprite stopAllActions]; [sprite runAction:[self runAction]]; } running = YES; moveingDirection = NO; [bodyControls moveToDirection:CGPointMake(-1, 0) onlyHorizontal:YES]; } - (void)right { [physicalBody setFriction:0]; if (!running && !inAir) { [sprite stopAllActions]; [sprite runAction:[self runAction]]; } running = YES; moveingDirection = YES; [bodyControls moveToDirection:CGPointMake(1, 0) onlyHorizontal:YES]; } - (void)jump { if (!inAir) { [bodyControls jump]; } } and here is my update method (called on every iteration): - (void)update:(NSMutableDictionary *)buttons { if (!isDead) { [self updateWithButtonName:BUTTON_LEFT inButtons:buttons whenPressed:@selector(left) whenUnpressed:@selector(stop)]; [self updateWithButtonName:BUTTON_RIGHT inButtons:buttons whenPressed:@selector(right) whenUnpressed:@selector(stop)]; [self updateWithButtonName:BUTTON_UP inButtons:buttons whenPressed:@selector(jump) whenUnpressed:@selector(nothing)]; [self updateWithButtonName:BUTTON_DOWN inButtons:buttons whenPressed:@selector(nothing) whenUnpressed:@selector(nothing)]; [sprite setFlipX:(moveingDirection)]; } [self checkPosition]; if (!running) [physicalBody setFriction:[[AppDel cfg] getHeroFriction]]; else [physicalBody setFriction:0]; } - (void)updateWithButtonName:(NSString *)buttonName inButtons:(NSDictionary *)buttons whenPressed:(SEL)pressedSelector whenUnpressed:(SEL)unpressedSelector { NSNumber *buttonNumber = [buttons objectForKey:buttonName]; if (buttonNumber == nil) return; if ([buttonNumber boolValue]) [self performSelector:pressedSelector]; else [self performSelector:unpressedSelector]; } - (void)checkPosition { b2Body *body = [self getBody]; b2Vec2 position = body->GetPosition(); CGPoint inWorldPosition = [[AppDel cfg] worldMeterPointFromScreenPixel:CGPointMake(position.x * PTM_RATIO, position.y * PTM_RATIO)]; if (inWorldPosition.x < 0 || inWorldPosition.x > WORLD_WIDGH / PTM_RATIO || inWorldPosition.y <= 0) { [self kill]; } }

Read the article

C# SOCKS proxy service for HTTP requests

- by Ed

I'm trying to build a service that will forward HTTP requests from agents like a browser to the Tor service. Problem is, the Tor service only accepts SOCKS4a connections. So my solution is to listen for HTTP requests, get the URL they're requesting, and make a request via Tor with the help of the Starksoft.Net.Proxy library. Then return the response. The library kind of works, but I'm not happy. It returns HTTP headers with the response and it can't handle images. So the responses are messed up. How could I improve my code? I'm very new to network programming. Sorry for the long example. public AnonymiserService(ILogger logger) { try { _logger = logger; _logger.Log("Listening on port {0}...", Properties.Settings.Default.ListeningPort); StartListener(new string[] { string.Format("http://*:{0}/", Properties.Settings.Default.ListeningPort) }); } catch (Exception ex) { _logger.LogError("Exception!", ex); } } private void StartListener(string[] prefixes) { if (!HttpListener.IsSupported) { _logger.LogError("HttpListener isn't supported on this machine!"); return; } HttpListener listener = new HttpListener(); foreach (string s in prefixes) listener.Prefixes.Add(s); while (true) { listener.Start(); IAsyncResult result = listener.BeginGetContext(new AsyncCallback(ListenerCallback), listener); result.AsyncWaitHandle.WaitOne(); } } private void ListenerCallback(IAsyncResult result) { try { // Get HTTP request HttpListener listener = (HttpListener)result.AsyncState; HttpListenerContext context = listener.EndGetContext(result); _logger.Log("Retrieving [{0}]", context.Request.RawUrl); // Create connection // Use Tor as proxy IProxyClient proxyClient = new Socks4aProxyClient("localhost", 9050); TcpClient tcpClient = proxyClient.CreateConnection(context.Request.UserHostName, 80); // Create message // Need to set Connection: close to close the connection as soon as it's done byte[] data = Encoding.UTF8.GetBytes(String.Format("GET {0} HTTP/1.1\r\nHost: {1}\r\nConnection: close\r\n\r\n", context.Request.Url.PathAndQuery, context.Request.UserHostName)); // Send message NetworkStream ns = tcpClient.GetStream(); ns.Write(data, 0, data.Length); // Pass on HTTP response HttpListenerResponse responseOut = context.Response; if (ns.CanRead) { byte[] buffer = new byte[32768]; int read = 0; string responseString = string.Empty; // Read response while ((read = ns.Read(buffer, 0, buffer.Length)) > 0) { responseString += Encoding.UTF8.GetString(buffer, 0, read); } // Remove headers if (responseString.IndexOf("HTTP/1.1 200 OK") > -1) responseString = responseString.Substring(responseString.IndexOf("\r\n\r\n")); // Forward response byte[] byteArray = Encoding.UTF8.GetBytes(responseString); responseOut.OutputStream.Write(byteArray, 0, byteArray.Length); } // Close streams responseOut.OutputStream.Close(); ns.Close(); // Close connection tcpClient.Close(); _logger.Log("Retrieved [{0}]", context.Request.RawUrl); } catch (Exception ex) { _logger.LogError("Exception in ListenerCallback!", ex); } }

Read the article

"(401)Authorization Required" when making a web service call using Axis

- by Arun P Johny

Hi, I'm using apache axis to connect to my sugar crm instance. When I'm trying to connect to the instance it is throwing the following exception Exception in thread "main" AxisFault faultCode: {http://xml.apache.org/axis/}HTTP faultSubcode: faultString: (401)Authorization Required faultActor: faultNode: faultDetail: {}:return code: 401 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>401 Authorization Required</title> </head><body> <h1>Authorization Required</h1> <p>This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.</p> </body></html> {http://xml.apache.org/axis/}HttpErrorCode:401 (401)Authorization Required at org.apache.axis.transport.http.HTTPSender.readFromSocket(HTTPSender.java:744) at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:144) at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:32) at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:118) at org.apache.axis.SimpleChain.invoke(SimpleChain.java:83) at org.apache.axis.client.AxisClient.invoke(AxisClient.java:165) at org.apache.axis.client.Call.invokeEngine(Call.java:2784) at org.apache.axis.client.Call.invoke(Call.java:2767) at org.apache.axis.client.Call.invoke(Call.java:2443) at org.apache.axis.client.Call.invoke(Call.java:2366) at org.apache.axis.client.Call.invoke(Call.java:1812) at org.beanizer.sugarcrm.SugarsoapBindingStub.get_server_info(SugarsoapBindingStub.java:1115) at com.greytip.sugarcrm.GreytipCrm.main(GreytipCrm.java:42) This basically says that I do not have the authorization to the resource. The same code is working fine in my testing environment. Sugarsoap service = new SugarsoapLocator(); SugarsoapPortType port = service.getsugarsoapPort(new java.net.URL( SUGAR_CRM_LOCATION + "/soap.php")); System.out.println(port.get_server_info().getVersion()); User_auth userAuth = new User_auth(); userAuth.setUser_name("user_name"); MessageDigest md = MessageDigest.getInstance("MD5"); String password = getHexString(md.digest("password".getBytes())); userAuth.setPassword(password); // userAuth.setVersion("0.1"); Entry_value login = port.login(userAuth, "myAppName", null); String sessionID = login.getId(); Above code is used to connect to the Sugar CRM installation. here line "System.out.println(port.get_server_info().getVersion());" is throwing the exception. One difference I noticed between the test and production environment is when I used the soap url in the browser the production site pops up a 'Authentication Required' popup. When I gives my proxy username and password in this popup, it shows the soap request details. The same is applicable for the login url also. First it will ask for the 'Authentication' then it will take to the sugar crm login page? Is it a server security setting? If it is then how to set this user name and password using java in a web service call. The authentication required popup is same as the one which comes when we try to access the tomcat manager through a browser. Thanks

Read the article

WCF Test Client Service Failed to Invoke

- by renjucool

I'm connection IBM.Iseries database in a c# application using ADO.NET iSeries drivers. My WCF service is throwing the error as "HTTP could not register URL http://+:80/Temporary_Listen_Addresses/771be107-8fa3-46f9-ac01-12c4d503d01e/ because TCP port 80 is being used by another application." <system.serviceModel> <client> <endpoint address="http://localhost:8080/Design_Time_Addresses/DataAccessLayer/POEngine/" binding="wsDualHttpBinding" bindingConfiguration="" contract="POServiceReference.IPOEngine" name="MyPoBindings"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="http://localhost:8080/Design_Time_Addresses/DataAccessLayer/POEngine/" binding="wsDualHttpBinding" bindingConfiguration="PoBindings1" contract="POServiceReference.IPOEngine" name="PoBindings"> <identity> <dns value="localhost" /> </identity> </endpoint> </client> <bindings> <wsDualHttpBinding> <binding name="PoBindings1" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard" maxBufferPoolSize="524288" maxReceivedMessageSize="65536" messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" /> <security mode="Message"> <message clientCredentialType="Windows" negotiateServiceCredential="true" algorithmSuite="Default" /> </security> </binding> </wsDualHttpBinding> <wsHttpBinding> <binding name="PoBindings" /> </wsHttpBinding> </bindings> <services> <service behaviorConfiguration="DataAccessLayer.POEngineBehavior" name="DataAccessLayer.POEngine"> <endpoint address="" binding="wsDualHttpBinding" bindingConfiguration="" name="PoBindings" contract="DataAccessLayer.IPOEngine"> <identity> <dns value="localhost" /> </identity> </endpoint> <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="http://localhost:8080/Design_Time_Addresses/DataAccessLayer/POEngine/" /> </baseAddresses> </host> </service> </services> <behaviors> <endpointBehaviors> <behavior name="NewBehavior" /> </endpointBehaviors> <serviceBehaviors> <behavior name="DataAccessLayer.Service1Behavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> <behavior name="DataAccessLayer.POEngineBehavior"> <serviceMetadata httpGetEnabled="true" /> <serviceDebug includeExceptionDetailInFaults="false" /> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> Having the problem also without using any IBM data access. A normal Hello World is also throwing the error.Where i need to change the port address

Read the article

WCF Service, Java JApplet client, transport error 405

- by Juan Zamudio

Hi all, I'm having a problem with a WCF Service and Java Client, I will try to give as much information as i can, thanks for your time. The Endpoint of the server is BasicHttpBinding, I tried hosting the server as a Windows Service and in IIS but nothing changed. The weird thing is that the Client works great if I use a simple class, in the moment I switch the class to an JApplet I get the problem mentioned. I'm using Eclipse as an IDE, I tried Axis and Metro to generate the stub with the same bad results. Here is an example of the Java class where everything is working public class TestSoaMetro { public String TestMethod(){ String result=null; IDigitalSignatureService aa = new DigitalSignatureService().getBasicHttpBindingEndpoint(); try { result= aa.getData("1", "id002962"); } catch (IDigitalSignatureServiceGetDataArgumentExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IDigitalSignatureServiceGetDataInvalidOperationExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } return result; } } Here is the example of the JApplet where I get the error: public class TestSoaMetroApplet extends JApplet { public void init() { Container content = getContentPane(); content.setBackground(Color.white); content.setLayout(new FlowLayout()); String result= this.TestMethod(); JLabel label = new JLabel(result); content.add(label); } public String TestMethod(){ String result=null; IDigitalSignatureService aa = null; try { aa = new DigitalSignatureService().getBasicHttpBindingEndpoint(); result= aa.getData("1", "id002962"); } catch (IDigitalSignatureServiceGetDataArgumentExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IDigitalSignatureServiceGetDataInvalidOperationExceptionFaultFaultMessage e) { // TODO Auto-generated catch block e.printStackTrace(); } return result; } } In the moment the Applet loads I get the error, is the exact same call so I don't understand why I get the exception using the Applet. I Also tried to call this from a Silverlight client and I was getting a security exception, this is where I found out about clientaccesspolicy.xml and crossdomain.xml, I added clientaccesspolicy.xml to the service and the Silverlight Client works great, so I decided to try crossdomain.xml and nothing, the Applet still does not work. I will put the stack trace at the end, thanks all for your time. Juan Zamudio javax.xml.ws.WebServiceException: org.apache.axis2.AxisFault: Transport error: 405 Error: Method not allowed at org.apache.axis2.jaxws.ExceptionFactory.createWebServiceException(ExceptionFactory.java:175) at org.apache.axis2.jaxws.ExceptionFactory.makeWebServiceException(ExceptionFactory.java:70) at org.apache.axis2.jaxws.ExceptionFactory.makeWebServiceException(ExceptionFactory.java:128) at org.apache.axis2.jaxws.core.controller.impl.AxisInvocationController.execute(AxisInvocationController.java:559) at org.apache.axis2.jaxws.core.controller.impl.AxisInvocationController.doInvoke(AxisInvocationController.java:118) at org.apache.axis2.jaxws.core.controller.impl.InvocationControllerImpl.invoke(InvocationControllerImpl.java:82) at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.invokeSEIMethod(JAXWSProxyHandler.java:317) at org.apache.axis2.jaxws.client.proxy.JAXWSProxyHandler.invoke(JAXWSProxyHandler.java:159) at $Proxy12.getData(Unknown Source) at TestSoaMetroApplet.TestMethod(TestSoaMetroApplet.java:28) at TestSoaMetroApplet.init(TestSoaMetroApplet.java:19) at sun.applet.AppletPanel.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: org.apache.axis2.AxisFault: Transport error: 405 Error: Method not allowed at org.apache.axis2.transport.http.HTTPSender.handleResponse(HTTPSender.java:295) at org.apache.axis2.transport.http.HTTPSender.sendViaPost(HTTPSender.java:190) at org.apache.axis2.transport.http.HTTPSender.send(HTTPSender.java:75) at org.apache.axis2.transport.http.CommonsHTTPTransportSender.writeMessageWithCommons(CommonsHTTPTransportSender.java:389) at org.apache.axis2.transport.http.CommonsHTTPTransportSender.invoke(CommonsHTTPTransportSender.java:222) at org.apache.axis2.engine.AxisEngine.send(AxisEngine.java:435) at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:402) at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229) at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165) at org.apache.axis2.jaxws.core.controller.impl.AxisInvocationController.execute(AxisInvocationController.java:554) ... 9 more

Read the article

Groovy/Grails Using WSClient to consume .net web service

- by ROb

I'm pretty new to both Grails/Groovy/Web services and i'm consuming a .net web service .. I have some code connects to the service using grails WS-client plugin : WebService webService def result = { def wsdl = ApplicationHolder.application.parentContext.getResource('WEB-INF/productsSoap.wsdl') def proxy = webService.getClient(wsdl.getURL().toString()) def productTypeListResponse = proxy.ProductTypeList() } I also used soapUI to examine the data returned from the web service which gave .. <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <soap:Body> <ProductTypeListResponse xmlns="http://tempuri.org/"> <ProductTypeListResult> <xs:schema id="ProductTypeListResult" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata"> <xs:element name="ProductTypeListResult" msdata:IsDataSet="true" msdata:UseCurrentLocale="true"> <xs:complexType> <xs:choice minOccurs="0" maxOccurs="unbounded"> <xs:element name="ProductTypeListResult"> <xs:complexType> <xs:sequence> <xs:element name="PRD_TypeId" type="xs:int" minOccurs="0"/> <xs:element name="PRD_TypeName" type="xs:string" minOccurs="0"/> <xs:element name="PRD_Type" type="xs:string" minOccurs="0"/> </xs:sequence> </xs:complexType> </xs:element> </xs:choice> </xs:complexType> </xs:element> </xs:schema> <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1"> <ProductTypeListResult xmlns=""> <ProductTypeListResult diffgr:id="ProductTypeListResult1" msdata:rowOrder="0"> <PRD_TypeId>2</PRD_TypeId> <PRD_TypeName>ProdType2</PRD_TypeName> <PRD_Type>S</PRD_Type> </ProductTypeListResult> <ProductTypeListResult diffgr:id="ProductTypeListResult2" msdata:rowOrder="1"> <PRD_TypeId>3</PRD_TypeId> <PRD_TypeName>ProdType3</PRD_TypeName> <PRD_Type>C</PRD_Type> </ProductTypeListResult> <ProductTypeListResult diffgr:id="ProductTypeListResult3" msdata:rowOrder="2"> <PRD_TypeId>4</PRD_TypeId> <PRD_TypeName>ProdType4</PRD_TypeName> </ProductTypeListResult> </ProductTypeListResult> </diffgr:diffgram> </ProductTypeListResult> </ProductTypeListResponse> which is a .net dataset .. So my question is how do i get at the information using my productTypeListResponse ? Can anyone give me a pointer ?

Read the article

WCF service using duplex channel in different domains

- by ds1

I have a WCF service and a Windows client. They communicate via a Duplex WCF channel which when I run from within a single network domain runs fine, but when I put the server on a separate network domain I get the following message in the WCF server trace... The message with to 'net.tcp://abc:8731/ActiveAreaService/mex/mex' cannot be processed at the receiver, due to an AddressFilter mismatch at the EndpointDispatcher. Check that the sender and receiver's EndpointAddresses agree. So, it looks like the communication just work in one direction (from client to server) if the components are in two separate domains. The Network domains are fully trusted, so I'm a little confused as to what else could cause this? Server app.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="JobController.ActiveAreaBehavior"> <serviceMetadata httpGetEnabled="false" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="JobController.ActiveAreaBehavior" name="JobController.ActiveAreaServer"> <endpoint address="mex" binding="mexTcpBinding" bindingConfiguration="" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="net.tcp://SERVER:8731/ActiveAreaService/" /> </baseAddresses> </host> </service> </services> </system.serviceModel> </configuration> but I also add an end point programmatically in Visual C++ host = gcnew ServiceHost(ActiveAreaServer::typeid); NetTcpBinding^ binding = gcnew NetTcpBinding(); binding->MaxBufferSize = Int32::MaxValue; binding->MaxReceivedMessageSize = Int32::MaxValue; binding->ReceiveTimeout = TimeSpan::MaxValue; binding->Security->Mode = SecurityMode::Transport; binding->Security->Transport->ClientCredentialType = TcpClientCredentialType::Windows; ServiceEndpoint^ ep = host->AddServiceEndpoint(IActiveAreaServer::typeid, binding, String::Empty); // Use the base address Client app.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <netTcpBinding> <binding name="NetTcpBinding_IActiveAreaServer" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" transactionFlow="false" transferMode="Buffered" transactionProtocol="OleTransactions" hostNameComparisonMode="StrongWildcard" listenBacklog="10" maxBufferPoolSize="524288" maxBufferSize="65536" maxConnections="10" maxReceivedMessageSize="65536"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Transport"> <transport clientCredentialType="Windows" protectionLevel="EncryptAndSign" /> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint address="net.tcp://SERVER:8731/ActiveAreaService/" binding="netTcpBinding" bindingConfiguration="NetTcpBinding_IActiveAreaServer" contract="ActiveArea.IActiveAreaServer" name="NetTcpBinding_IActiveAreaServer"> <identity> <userPrincipalName value="[email protected]" /> </identity> </endpoint> </client> </system.serviceModel> </configuration> Any help is appreciated! Cheers

Read the article

Trouble with setting entry point for GWT service

- by Xorty

Hello. I've followed serveral tutorials and read official docs at code.google.com, but still didn't manage to resolve this thing. I am creating simple service that'll check if user can be logged. CLIENT SIDE: public interface LoginService extends RemoteService { /** * Checks, if user has valid login. * @param user User's login. * @return True if such a login is in the database. */ boolean isValidUser(User user); } And here is Async interface: public interface LoginServiceAsync { /** * Checks, if user has valid login. * @param user User's login. * @param callback the callback to return True if such a login is in the database. */ void isValidUser(User user, AsyncCallback<Boolean> callback); } SERVER SIDE: public class LoginServiceImpl extends RemoteServiceServlet implements LoginService { /** * serial version UID */ private static final long serialVersionUID = 1044980345057997696L; /**{@inheritDoc} */ @Override public boolean isValidUser(User user) { boolean success = true; //TODO change } } Now I have entry point class MailClient.java. I append here widget like: CustomWidgets.getLoginWidget(this); // access rootPanel and append widget Now I need to make actual call to my service, and here is problem: LoginServiceAsync loginService = (LoginServiceAsync) GWT.create(LoginService.class); User user = new User(boxName.getText(), boxPassword.getText()); AsyncCallback<Boolean> callback = new AsyncCallback<Boolean>() { @Override public void onFailure(Throwable caught) { Window.alert(caught.getMessage()); //TODO change } @Override public void onSuccess(Boolean result) { Window.alert("success"); //TODO change } }; ((ServiceDefTarget) loginService).setServiceEntryPoint(GWT.getModuleBaseURL()+"login"); // dunno what should be here So to recap, I don't know how to set service's entry point. Here's my MailClient.gwt.xml file: <module> <inherits name="com.google.gwt.user.User"/> <inherits name="com.google.gwt.user.theme.standard.Standard"/> <entry-point class="com.xorty.mailclient.client.MailClient"/> <servlet path="/login" class="com.xorty.mailclient.server.servlets.LoginServiceImpl" /> <inherits name="com.xorty.mailclient.MailClient"/> <inherits name="com.xorty.mailclient.MailClient"/> <inherits name="com.xorty.mailclient.MailClient"/> <inherits name="com.xorty.mailclient.MailClient"/> <inherits name="com.xorty.mailclient.MailClient"/> </module> My web.xml file: <?xml version="1.0" encoding="UTF-8"?> <web-app version="2.4" xmlns="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd">  <welcome-file-list> <welcome-file>MailClient.html</welcome-file> </welcome-file-list> <servlet> <servlet-name>LoginService</servlet-name> <servlet-class>com.xorty.mailclient.server.servlets.LoginServiceImpl</servlet-class> </servlet> <servlet-mapping> <servlet-name>LoginService</servlet-name> <url-pattern>/com.xorty.mailclient.MailClient/login</url-pattern> </servlet-mapping> </web-app> And here is screenshot of project structure:

Read the article

Launching an Activity from a Service

- by nldev

When I am trying to launch a call activity from a Service, I get a NullPointerException. Here is my code: Intent callIntent = new Intent(Intent.ACTION_CALL); callIntent.setData(Uri.parse("tel:" + number)); callIntent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK); startActivity(callIntent); I get the exception on the startActivity line. I tried to use getApplication.startActivity and getApplicationContext.startActivity but no luck. Any ideas? edit : Maybe some usefull info: I am trying to create a service that will run on the background and scan sensor data, when a certain signal is given i would like to maken an automated call to a number. edit : full adb error code: 03-31 09:04:10.214: ERROR/AndroidRuntime(1896): Uncaught handler: thread main exiting due to uncaught exception 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): java.lang.RuntimeException: Unable to instantiate service dfz.epilepsiedetector.services.DetectionService: java.lang.NullPointerException 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.app.ActivityThread.handleCreateService(ActivityThread.java:2668) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.app.ActivityThread.access$3100(ActivityThread.java:116) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1846) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.os.Handler.dispatchMessage(Handler.java:99) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.os.Looper.loop(Looper.java:123) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.app.ActivityThread.main(ActivityThread.java:4203) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at java.lang.reflect.Method.invokeNative(Native Method) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at java.lang.reflect.Method.invoke(Method.java:521) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:791) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:549) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at dalvik.system.NativeStart.main(Native Method) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): Caused by: java.lang.NullPointerException 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.content.ContextWrapper.getPackageName(ContextWrapper.java:120) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.content.ComponentName.<init>(ComponentName.java:75) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.content.Intent.<init>(Intent.java:2302) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at dfz.epilepsiedetector.services.DetectionService.<init>(DetectionService.java:35) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at java.lang.Class.newInstanceImpl(Native Method) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at java.lang.Class.newInstance(Class.java:1472) 03-31 09:04:10.226: ERROR/AndroidRuntime(1896): at android.app.ActivityThread.handleCreateService(ActivityThread.java:2665) edit Trimmed class code: `public class DetectionService extends IntentService implements SensorEventListener { private SensorManager mSensorManager; private Sensor mAccelerometer; private boolean hasSeizure = false; private final int POLLS_PER_SECOND = 10; public DetectionService() { super("EpilepsionDetectionService"); //mSensorManager = (SensorManager)getSystemService(SENSOR_SERVICE); // mAccelerometer = mSensorManager.getDefaultSensor(Sensor.TYPE_ACCELEROMETER); /*Intent callIntent = new Intent(Intent.ACTION_CALL); callIntent.setData(Uri.parse("tel:" + "+31648363944")); callIntent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK);*/ Intent callIntent = new Intent(DetectionService.this, InformationActivity.class); callIntent.addFlags(Intent.FLAG_ACTIVITY_NEW_TASK); getApplication().startActivity(callIntent); //((Activity) getContext()).startActivity(callIntent); }`

Read the article

Using Web Services from an XNA 4.0 WP7 Game

- by Michael Cummings

Now that the Windows Phone 7 development tools have been out for a while, let’s talk about how you can use them. Windows Phone 7 ( WP7 ) has two application types that you can create, either Silverlight or XNA, and you can’t really mix the two together. The development environment for WP7 is a special edition of Visual Studio 2010 called Visual Studio 2010 Express for Windows Phone. This edition will be installed with the WP7 tools, even if you have a full edition of VS2010 already installed. While you can use your full edition of VS2010 to do WP7 development, this astute developer has noticed that there are a few things that you can only do in the Express for Windows Phone edition. So lets start by discussing WP7 networking. On the WP7 platform the only networking available is through Web Services using WCF or if you’re really masochistic, you’ll use the WebClient to do http. In Silverlight, it’s fairly easy to wire up a WCF proxy to call a web service and get some data. In the XNA projects, not so much. Create WCF Service First, we’ll create our service that will return some information that we need in our game. Open Visual Studio 2010, and create a new WCF Web Service project. We’ll use the default implementation as we only need to see how to use a service, we are not interested in creating a really cool service at this point. However you may want to follow the instructions in the comments of Service1.svc.cs to change the name to something better, I used DataService and IDataService for the interface. You should now be able to run the project and the WCF Test Client will load and properly enumerate your service. At this point we have a functional service that can be consumed by our XNA game. Consume the WCF Service Open Visual Studio 2010 Express for Windows Phone and create a new XNA Game Studio 4.0 Windows Phone Game project. Now if you try to add a service reference to the project, you’ll notice that the option is not available. However, if you add a Silverlight application to your solution, you’ll notice that you can create a service reference there. So using the Silverlight project, we can create the service reference. Unfortunately you can’t reference the Silverlight project from the XNA Game project, so using Windows Explorer copy the Service References folder from the Silverlight project directory to the XNA Game project directory, then add the folder to your XNA Game project. You’ll need to set the property Build Action to None for all the files, except for Reference.cs, which should be Build. Truely, we only need Reference.cs but I find it easier to copy the whole folder. If you try to compile at this point, you’ll notice that we are missing a couple of references, System.Runtime.Serialization, System.Net and System.ServiceModel. Add these to the XNA Game project and you should build successfully. You’ll also need to copy the ServiceReference.ClientConfig file and add it to your project. The WCF infrastructure looks for this file and will complain if it can’t find it. You’ll need to set the Copy to Output Directory property to Copy if Newer. We now need to add the code to call the service and display the results on the screen. Go ahead and add a SpriteFont resource to the Content project and load it in the Game project. There’s nothing here that’s changed much from 3.1 other than your Content project is now under the Solution node and not the Project node. While you’re at it, add a string field to store the result of the service call, and intialize it to string.Empty. Then in the Draw method, write the string out to the screen, only if it does not equal string.Empty. Now to wrap this up, lets create a new field that’s of the type DataServiceClient. In the Initialize Method, create a new instance of this type using its default contructor, then in the LoadContent we can call the service. Since we can only call the GetData method of our service asynchronously we need to set up a Completed event handler first. Thankfully, Visual Studio helps out a lot there just create, using the tab key whatever VS says to. In the GetDataAsyncCompleted event handler assign the service result ( e.Result) to your string field. If you run your game, you should get something like this : Enjoy!

Read the article

WCF service dataContractSerializer maxItemsInObjectGraph in web.config

- by Dave

I am having issues specifying the dataContractSerializer maxItemsInObjectGraph in host's web.config. <behaviors> <serviceBehaviors> <behavior name="beSetting"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="True" /> <dataContractSerializer maxItemsInObjectGraph="2147483646"/> </behavior> </serviceBehaviors> </behaviors> <services> <service name="MyNamespace.MyService" behaviorConfiguration="beSetting" > <endpoint address="http://localhost/myservice/" binding="webHttpBinding" bindingConfiguration="webHttpBinding1" contract="MyNamespace.IMyService" bindingNamespace="MyNamespace"> </endpoint> </service> </services> The above has no effect on my data pull. The server times out because of the large volume of data. I can however specify the max limit in code and that works [ServiceBehavior(MaxItemsInObjectGraph=2147483646, IncludeExceptionDetailInFaults = true)] public abstract class MyService : MyService { blah... } Does anyone know why I can't make this work through a web.config setting? I would like to keep in the web.config so it is easier for future updates.

Search Results

Search found 29245 results on 1170 pages for 'self service'.

Page 152/1170 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159 | Next Page >

- by user222094

- by brendonpage

- by Martin Wickman

- by Demla Pawan

- by Superbest

- by Alejandra Meraz

- by RichardCroasher

- by murali

- by Colin

- by ACShorten

- by Simon

- by Jeff Groby

- by Lewis42

- by Chris R

- by SentineL

- by Ed

- by Arun P Johny

- by renjucool

- by Juan Zamudio

- by ROb

- by ds1

- by Xorty

- by nldev

- by Michael Cummings

- by Dave

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159 | Next Page >