Search Results

Search found 5395 results on 216 pages for 'tuckey urlrewrite filter'.

Page 152/216 | < Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >

• setting page access permissions in drupal

  - by Nikhil Patil

  I'm new to drupal. Its a very dumb question I guess. I have enabled PHP filter module so that I can create a new page with my own PHP code in it. This particular page I want to be accessible to only authenticated users, not visible to anonymous users. How can I achieve this? Can I set permissions for individual pages in drupal? Or is it possible to identify that an anonymous user is trying to access the current page through PHP code?

  Read the article

• Selectively prevent Session from being created

  - by Jean Barmash

  In my app, I have an external monitor that pings the app ever few minutes and measures its uptime / response time Every time the monitor connects, a new server session is created, so when I look at the number of sessions, it's always a minimum of 15, even during times where there are no actual users. I tried to address this with putting the session creation code into a filter, but that doesn't seem to do it - I guess session automatically gets created when the user opens the first page? all() { before = { if (actionName=='signin') { def session = request.session //creates session if not exists } } } I can configure the monitor to pass in a paramter if I need to (i.e. http://servername.com/?nosession, but not sure how to make sure the session isn't created.

  Read the article

• Yet another Rails routing question

  - by danhere

  I can't seem to grasp the Rails routing just yet. I want to be able to link the site to, for example, ...com/store/xbox360/Mass Effect 2 (which is /store(my controller)/:system/:title). I have the database entries that include the :system and :title variables (?). How would I route these to show up and filter these entries? Or is this something I need to set up in the controller? I'm lost. Thanks so much for your help.

  Read the article

• How to customize an OpenFileDialog using nested types?

  - by vitorbal

  Say I wanted to customize an OpenFileDialog and change, for example, the way the filter for file extensions work, as in the case of this question. After I pointed out to the author of said question that the OpenFileDialog is not inheritable, I got a comment with the following: Even though the OpenFileDialog is sealed (not inheritable), you may use it as a nested type. For instance, using a property that will get the NativeDialog. Then, you write your method always using the NativeDialog property and you're done. My question is, can someone provide me with an example code on how would I proceed on doing something like that? I'm kind of new to the concept of nested types so I'm having a hard time figuring that out by myself, and I searched around the web and couldn't find anything too concrete about it. Thanks!

  Read the article

• Cache whole result set or based on user ?

  - by eugeneK

  In my web application i have statistics which shown for each user separately ie. posts made , posts made today , articles started by and so on... Each user has his own special statistics. What is more flexible and "right" to work with one huge DataTable in Cache with whole data from all users and then loop thought DataTable to find certain user data or to cache each user ie. cacheObj + userID... User can filter his own results by dates and types which is why i need flexible and reliable solution thanks...

  Read the article

• matrix image processing in OpenGL CE

  - by iHorse

  im trying to create an image filter in OpenGL CE. currently I am trying to create a series of 4x4 matrices and multiply them together. then use glColorMask and glColor4f to adjust the image accordingly. I've been able to integrate hue rotation, saturation, and brightness. but i am having trouble adding contrast. thus far google hasn't been to helpful. I've found a few matrices but they don't seem to work. do you guys have any ideas?

  Read the article

• How can I get a fixed-position menu like slashdot's comment filtration menu

  - by pkaeding

  Slashdot has a little widget that allows you to tweak your comment threshold to filter out down-modded comments. It will be in one place if you scroll to the top of the page, and as you scroll down, at some point, where its original home is about to scroll off the page, it will switch to fixed position, and stay on your screen. (To see an example, click here.) My question is, how can I accomplish the same effect of having a menu be in one place when scrolled up, and switch to fixed position as the user scrolls down? I know this will involve a combination of CSS and javascript. I'm not necessarily looking for a full example of working code, but what steps will my code need to go through?

  Read the article

• E4X in ActionScript

  - by Brian Genisio

  Hey all, Looking at the E4X implementation in ActionScript, it occurs to me that they had to figure out how to do three things that I am not sure can be done within ActionScript regularly: Properties/Getters prefixed with @: var myAttribute = xmlPerson.@name; Nameless functions for filtering: xmlData.person.(/* predicate */) lambda syntax for predicates: xmlData.person.(@name == "Brian") So here is my question: Are these just one-off capabilities (much like Vector.<>) they put in just for E4X, therefore keeping out of reach for us? Or do we, as ActionScript developers, have access to these features? More specifically, I'd love to get access to the expression tree of that lambda predicate for my own code (not tied to the XML classes in any way). I figured out that this is called the "filter operator"... but I am not sure how to harness it. Not sure I can... since ActionScript does not allow for operator overloading :(

  Read the article

• What XSS/CSRF attacks (if any) to be aware of when allowing video embeds?

  - by fireeyedboy

  I've been assigned a project for a website where users will be allowed to upload video's (using a YouTube API) but more importantly (for me) they will also be allowed to submit video embed codes (from numerous video sites, YouTube, Vimeo, etc. etc.). Having no experience with allowing users to embed video: How can I best protect against cross site scripting and/or cross site request forgery attacks specifically for video embedding? What are some of the common pitfalls to watch for? At a minumum I would think to strip all tags except <object> and <embed>. But I have a feeling this will not be enough, will it? If it is of importance, the environment will be: PHP/Zend Framework MySQL Bonuspoints: Is there a common minimum golden rule/code template for video embed codes that are valid across all video sites that I could use to filter the input?

  Read the article

• Referencing Excel Sheets with JET Driver Sheets Are Duplicated with Underscores

  - by MasterMax1313

  I'm referencing an excel document with the JET database driver, which was working just fine until one day the application failed. Upon further investigation I noticed that the tabs were duplicated in some instances (all tabs actually) - i.e. Tab1$ and Tab1$_. I've researched this issue and found that it is caused by the user applying a filter. Now the filters have been removed, no special formatting, frozen panes, or print formats, but still I have these tabs duplicated. Normally I'd code around this, but since we're in a code freeze I need to come up with an Excel based solution. I want to get rid of those crazy underscored tab names / reverences. I could probably run a program to clean up the file if necessary, to send it back to the users, but I want to explore Excel options first. Thoughts? I have Excel 2010, and access to any other version as well.

  Read the article

• Pass a captured named regular expression to URL dictionary in generic view

  - by Trent Jurewicz

  I am working with a generic view in Django. I want to capture a named group parameter in the URL and pass the value to the URL pattern dictionary. For example, in the URLConf below, I want to capture the parent_slug value in the URL and pass it to the queryset dictionary value like so: urlpatterns = patterns('django.views.generic.list_detail', (r'^(?P<parent_slugs>[-\w])$', 'object_list', {'queryset':Promotion.objects.filter(category=parent_slug)}, 'promo_promotion_list'), ) Is this possible to do in one URLConf entry, or would it be wiser if I create a custom view to capture the value and pass the queryset directly to the generic view from my overridden view?

  Read the article

• Facelets charset problem

  - by Vladimir

  Hi! In my earlier post there was a problem with JSF charset handling, but also the other part of the problem was MySQL connection parameters for inserting data into db. The problem was solved. But, I migrated the same application from JSP to facelets and the same problem happened again. Characters from input fields are replaced when inserting to database (c is replaced with Ä), but data inserted into db from sql scripts with proper charset are displayed correctly. I'm still using registered filter and page templates are used with head meta tag as following: <meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-2"> If I insert into h:form tag the following attribute: acceptcharset="iso-8859-2" I get correct characters in Firefox, but not in IE7. Is there anything else I should do to make it work? Thanks in advance.

  Read the article

• Top tips for designing GUIs?

  - by oxbow_lakes

  A while back I read (before I lost it) a great book called GUI Bloopers which was full of examples of bad GUI design but also full of useful tidbits like Don't call something a Dialog one minute and a Popup the next. What top tips would you give for designing/documenting a GUI? It would be particularly useful to hear about widgets you designed to cram readable information into as little screen real-estate as possible. I'm going to roll this off with one of my own: avoid trees (e.g. Swing's JTree) unless you really can't avoid it, or have a unbounded hierarchy of stuff. I have found that users don't find them intuitive and they are hard to navigate and filter. PS. I think this question differs from this one as I'm asking for generalist tips

  Read the article

• Entity Framework query builder methods: why "it" and not lambdas?

  - by nlawalker

  I'm just getting started with EF and a query like the following strikes me as odd: var departmentQuery = schoolContext.Departments.Include("Courses"). OrderBy("it.Name"); Specifically, what sticks out to me is "it.Name." When I was tooling around with LINQ to SQL, pretty much every filter in a query-builder query could be specified with a lambda, like, in this case, d = d.Name. I see that there are overrides of OrderBy that take lambdas that return an IOrderedQueryable or an IOrderedEnumable, but those obviously don't have the Execute method needed to get the ObjectResult that can then be databound. It seems strange to me after all I've read about how lambdas make so much sense for this kind of stuff, and how they are translated into expression trees and then to a target language - why do I need to use "it.Name"?

  Read the article

• How to override event on a UserControl

  - by Vadim

  Hello! I have a WinForms application (OwnerForm) with some UserControl. When textbox of UserControl is changed, I want to filter content of a OwnerForm. But how can I make it? I don't want to specify OwnerForm inside the user control. I know a solution to add manually handlers for MyUserControl.tb.TextChanged to some functions on a owner form, but I think it's bad way. I'll prefer to have overridable functions, but I can't imagine how to do it. Any suggestions? Thanks in advance,

  Read the article

• reassembling http packets with perl and parsing it

  - by johnny2

  I am using net::pcap module to capture packets with this filter: dst $my_host and dst port 80 inside the net::pcap::loop i use the below callback function: net::pcap::loop($pcap_t,-1,\my_callback,'') where my_callback look like this : my_callback { my ($user_data, $header, $packet) = @_; # Strip ethernet IP and TCP my $ether_data = NetPacket::Ethernet::strip($packet); my $ip = NetPacket::IP->decode($ether_data); my $tcp = NetPacket::TCP->decode($ip->{'data'}); } could someone help me how can i assemble the http packets to one packet and extract its header .

  Read the article

• require_owner code to limit controller actions not recognizing current user as owner

  - by bgadoci

  I am trying to restrict access to certain actions using a before_filter which seems easy enough. Somehow the ApplicationController is not recognizing that the current_user is the owner of the user edit action. When I take the filter off the controller correctly routes the current_user to their edit view information. Here is the code. Link to call edit action from user controller (views/questions/index.html.erb): <%= link_to "Edit Profile", edit_user_path(:current) %> ApplicationController (I am only posting the code that I think is affecting this but can post the whole thing if needed). class ApplicationController < ActionController::Base def require_owner obj = instance_variable_get("@#{controller_name.singularize.camelize.underscore}") # LineItem becomes @line_item return true if current_user_is_owner?(obj) render_error_message("You must be the #{controller_name.singularize.camelize} owner to access this page", root_url) return false end end and the before_filter class UsersController < ApplicationController before_filter :require_owner, :only => [:edit, :update, :destroy] #... end I simply get the rendering of the error message from the ApplicationController#require_owner action.

  Read the article

• Possible Performance Considerations using Linq to SQL Repositories

  - by Robert Harvey

  I have an ASP.NET MVC application that uses Linq to SQL repositories for all interactions with the database. To deal with data security, I do trimming to filter data to only those items to which the user has access. This occurs in several places: Data in list views Links in a menu bar A treeview on the left hand side containing links to content Role-based security A special security attribute, inheriting from AuthorizeAttribute, that implements content-based authorization on every controller method. Each of these places instantiates a repository, which opens a Linq to Sql DataContext and accesses the database. So, by my count, each request for a page access opens at least six separate Linq to SQL DataContexts. Should I be concerned about this from a performance perspective, and if so, what can be done to mitigate it?

  Read the article

• proper Django ORM syntax to make this code work in MySQL

  - by gtujan

  I have the following django code working on an sqlite database but for some unknown reason I get a syntax error if I change the backend to MySQL...does django's ORM treat filtering differently in MySQL? def wsjson(request,imei): wstations = WS.objects.annotate(latest_wslog_date=Max('wslog__date'),latest_wslog_time=Max('wslog__time')) logs = WSLog.objects.filter(date__in=[b.latest_wslog_date for b in wstations],time__in=[b.latest_wslog_time for b in wstations],imei__exact=imei) data = serializers.serialize('json',logs) return HttpResponse(data,'application/javascript') The code basically gets the latest logs from WSlog corresponding to each record in WS and serializes it to json. Models are defined as: class WS(models.Model): name = models.CharField(max_length=20) imei = models.CharField(max_length=15) description = models.TextField() def __unicode__(self): return self.name class WSLog(models.Model): imei = models.CharField(max_length=15) date = models.DateField() time = models.TimeField() data1 = models.DecimalField(max_digits=8,decimal_places=3) data2 = models.DecimalField(max_digits=8,decimal_places=3) WS = models.ForeignKey(WS) def __unicode__(self): return self.imei

  Read the article

• In SQL Server merge replication, how does reinitializing work?

  - by Craig Shearer

  I have set up a pull subscription to a merge publication in SQL Server. I use parameterized row filters on some tables. This works fine with the initial synchronization - just the rows using the filter arrive in the replicated (client) database. However, at some later point I'd like to be able to synchronize the replicated database again from the server and have new rows that match the parameterized row filters appear on the client database. The doucmentation seems to indicate that I can call Reinitialize() to do this. However, when I do try this and Synchronize again, I get an error saying that the script 'snapshot.pre' cannot be applied to the database. I've inspected the script and can see why - it's trying to drop some functions are used by the tables in the database. It would appear that for Reinitialize() to work it requires that the database be blank. Am I misunderstanding something here? Is there a way to make this work?

  Read the article

• Is str.replace(..).replace(..) ad nauseam a standard idiom in Python?

  - by meeselet

  For instance, say I wanted a function to escape a string for use in HTML (as in Django's escape filter): def escape(string): """ Returns the given string with ampersands, quotes and angle brackets encoded. """ return string.replace('&', '&amp;').replace('<', '&lt;').replace('>', '&gt;').replace("'", '&#39;').replace('"', '&quot;') This works, but it gets ugly quickly and appears to have poor algorithmic performance (in this example, the string is repeatedly traversed 5 times). What would be better is something like this: def escape(string): """ Returns the given string with ampersands, quotes and angle brackets encoded. """ # Note that ampersands must be escaped first; the rest can be escaped in # any order. return replace_multi(string.replace('&', '&amp;'), {'<': '&lt;', '>': '&gt;', "'": '&#39;', '"': '&quot;'}) Does such a function exist, or is the standard Python idiom to use what I wrote before?

  Read the article

• WinForms / .Net interactive world map - how?

  - by FerretallicA

  In a CD collection program, I have each artist's country of origin stored in the main database and want to display a map of the world which: Colour-codes each country depending on the number of CDs by artists in that country Allows clicking on each country to filter a list of CDs to only ones by artists in that country This is a heavily simplified version of what I'm trying to do, but if I can at least get this far the rest should be easy enough to figure out. So far the closest thing I've found to what I'm trying to do is here: http://www.synergetechsolutions.com/blog/analytics-world-map-control Ideally I don't want to be embedding Flash in my program though, and the only other solutions I've found all involve SVG which I haven't managed to get working in practice outside of a web browser control (and I DEFINITELY don't want to be embedding a browser in the forms). Something in pure managed code and either GDI+ or WPF would be preferable. Are there any existing components that would get me started, or can anyone suggest how to approach it from scratch?

  Read the article

• css opacity not working in IE7

  - by Alsciende

  I have this test page : http://jsfiddle.net/VWnm9/7/. The image is correctly faded on all my computers running IE6, 7 or 8, except for one computer that runs IE7 and doesn't fade the flower, even in noext mode. The page is : <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html lang="en"> <head> <style type="text/css"> body { background: blue; } img { filter: alpha(opacity=10); opacity: 0.1; } </style> </head> <body> <img src="http://upload.wikimedia.org/wikipedia/commons/c/c3/Extracted_pink_rose.png" /> </body> </html> Does anybody have an idea why?

  Read the article

• Getting Google Chrome to Ignore IE Javascript

  - by swajak

  I'm creating a slideshow using javascript that fades images. Awhile back, I discovered that to change the opacity of an image, I have to use a different API, depending on whether the page is viewed in Firefox or IE. Firefox: img.style.opacity = [value 0 to 1]; IE: img.style.filter="progid:DXImageTransform.Microsoft.Alpha(opacity= [value 0 to 100] )"; So, currently, I use <script LANGUAGE="JScript"> for code that is meant for IE. This was suggested in the Mozilla docs. The problem: Chrome thinks my <script LANGUAGE="JScript"> code is valid, when it is not. How to make Chrome ignore the code inside <script LANGUAGE="JScript"> ? Or how to make my opacity code cross-browser?

  Read the article

• Java FileFilter

  - by Mr CooL

  public class DocFilter extends FileFilter { public boolean accept(File f) { if (f.isDirectory()) { return true; } String extension = Utils.getExtension(f); if (extension != null) { if (extension.equals(Utils.doc) || extension.equals(Utils.docx) ) { return true; } else { return false; } } return false; } //The description of this filter public String getDescription() { return "Just Document Files"; } } Netbeans compiler warned with the error, "No interface expected here" for above code Anyone has idea what was the problem?? I tried changing the 'extends' to 'implements', however, it didn't seem to work that way. and when I changed to implements, the following code cannot work, chooser.addChoosableFileFilter(new DocFilter()); and with this error, "method addChoosableFileFilter in class javax.swing.JFileChooser cannot be applied to given types required: javax.swing.filechooser.FileFilter" Can anyone help on this? Thanks..

  Read the article

< Previous Page | 148 149 150 151 152 153 154 155 156 157 158 159  | Next Page >