Search Results

Search found 5323 results on 213 pages for 'associated sorting'.

Page 153/213 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• Does the method of adjustment matter, or just the final calibration?

  - by Steve

  A company produces software (and hardware) that is used to both perform automatic adjustments on electronic test equipment as well as perform calibrations of the same equipment. The results of the calibrations are put onto a certificate of calibration that is sent to the customer along with the equipment. This calibration certificate states various conditions of the calibration, such as what hardware (models/serial numbers) and software (version) was used to perform the calibration, as well as things like environmental conditions, etc. Making the assumption that the software used to produce the data (and listed on the calibration certificate) used on the certificate of calibration must have gone through a "test/release" process and must be considered "released" software - does this also mean that the software used for adjustment must also be released? I believe that the method (software/environmental conditions/etc) used or present during adjustment doesn't matter, all that really matters is the end result of the calibration, the conditions present during the calibration, and whether or not the equipment was within the specifications. The real question I'm hoping to get answered: Is there a reputable source (e.g. NIST or somewhere similar) that addresses this question? (I have searched...) The thinking is that during high volume production runs, the "unreleased" system can be used to perform adjustments, as long as a released system is used to perform the calibrations, since the time required to perform the adjustments is much longer than the calibration. This unreleased system will eventually become released for use, but currently is not. Also, please not that there is a distinction between "adjustment" and "calibration". The definition from BIPM International vocabulary of metrology, 2.39: Operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties (of the calibrated instrument or secondary standard) and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication. Followed by NOTE 2 (emphasis in original text): Calibration should not be confused with adjustment of a measuring system, often mistakenly called "self-calibration", nor with verification of calibration As a side note, I'm not sure why this got down voted. It's regarding software and it's use before and after release for use. I believe there is a best practice that can be applied and this is (hopefully) not primarily opinion based.

  Read the article

• Partial Shader Signatures HLSL D3D11 C++

  - by ThePhD

  I had been debugging a problem I was having in a single shader file with 2 functions in it. I'm using DirectX 11, vs_5_0 and ps_5_0. I have stripped it down to its basic components to understand what was going wrong with the shaders, because the different named components of the Pixel and Vertex shaders were swapping the data being input: void QuadVertex ( inout float4 position : SV_Position, inout float4 color : COLOR0, inout float2 tex : TEXCOORD0 ) { // ViewProject is a 4x4 matrix, // just included here to show the simple passthrough of the data position = mul(position, ViewProjection); } And a Pixel Shader: float4 QuadPixel ( float4 color : COLOR0, float2 tex : TEXCOORD0 ) : SV_Target0 { // Color is filled with position data and tex is // filled with color values from the Vertex Shader return color; } The ID3D11InputLayout and associated C++ code correctly compiles the shaders and sets them up with some simple primitive data: data[0].Position.x = 0.0f * 210; data[0].Position.y = 1.0f * 160; data[0].Position.z = 0.0f; data[1].Position.x = 0.0f * 210; data[1].Position.y = 0.0f * 160; data[1].Position.z = 0.0f; data[2].Position.x = 1.0f * 210; data[2].Position.y = 1.0f * 160; data[2].Position.z = 0.0f; data[0].Colour = Colors::Red; data[1].Colour = Colors::Red; data[2].Colour = Colors::Red; data[0].Texture = Vector2::Zero; data[1].Texture = Vector2::Zero; data[2].Texture = Vector2::Zero; When used with the shader, the float4 color always ended up with the position data, and the float2 tex always ended up with the color data. After a moment, I figured out that the shader's input and output signatures needed to be in the correct order and the correct format and be laid out in the exact order of the output from the Vertex Shader, regardless of the semantics: float4 QuadPixel ( float4 pos : SV_Position, float4 color : COLOR0, float2 tex : TEXCOORD0 ) : SV_Target0 { return color; } After finding this out, My question is: Why don't the semantics map the appropriate components when going from Vertex Shader to Pixel Shader? Is there any way that I can make it so certain semantics are always mapped to other semantics, or do I always have to follow the rigid Shader Signature (in this case, Position, Color, and Texture) ? As a side note for why I'm asking: I know that when using XNA, my shader signatures for functions could differ in position and even drop items from Vertex Shader to Pixel Shader function parameters, having only the COLOR0 and TEXCOORD0 components being used (and it would still match up correctly). However, I also know that XNA relied on DX9 (and maybe a little DX10) implementation, and that maybe this kind of flexibility no longer exists in DX11?

  Read the article

• Why wifi doesn't work in this case?

  - by xRobot

  I have a brand new notebook where I have installed Windows 7 and Ubuntu 12.04 LTS 64bit in dual boot. In windows 7 wifi works but in Ubuntu not. Could you help me please ? iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off eth0 no wireless extensions. lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 07 serial: b4:b5:1f:1b:9a:56 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:3000(size=256) memory:c2404000-c2404fff memory:c2400000-c2403fff *-network description: Wireless interface product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 84:4b:f4:0a:3a:22 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.2.0-31-generic firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:c2500000-c250ffff lspci | grep -i net 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) 02:00.0 Network controller: Ralink corp. Device 539a iwlist scan lo Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Device or resource busy eth0 Interface doesn't support scanning. lsmod Module Size Used by rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 224173 1 joydev 17693 0 hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 97362 0 snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device arc4 12529 2 rt2800pci 18715 0 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 51144 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib soundcore 15091 1 snd mac_hid 13253 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev wmi 19256 1 hp_wmi i915 473240 3 cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 serio_raw 13211 0 video 19596 1 i915 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 rfkill list: # rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Analysing SQLBits Feedback

  - by jamiet

  Earlier this week I received all the feedback that people offered on my session at SQLBits 7 in York – “SSIS Dataflow Performance Tuning” (the video is available online if you wish to see it). As you may have gathered from previous posts on this blog and my less-SQLy-focused Wordpress blog I am a big fan of collecting and tracking both personal and public data and session feedback lends itself very well to tracking because it is quantitative rather than qualitative; by that I mean attendees are invited to provide marks out of ten rather than (or, in the case of SQLBits, as well as) written comments. The SQLBits feedback is also useful because they use a consistent format – the same questions are asked each time – this means it is particularly easy to to track whether the scores that people give are trending up or down. I suspect that somewhere the SQLBits organisers have a big Analysis Services cube (ok, perhaps its an Excel pivot table) that allows them to analyse these scores per conference, speaker, track etc.… and there’s no reason that we as session speakers cannot do the same thing. To that end I have started to store my feedback in an Excel spreadsheet of my own which in the interests of transparency is available for public viewing (only a web browser required) on SkyDrive at http://cid-550f681dad532637.office.live.com/view.aspx/Public/Misc/Personal%20SQLBits%20Session%20Feedback.xlsx. I have used a pivot table to aggregate all that feedback and here is a screenshot: I am hereby making a public plea to the SQLBits organisers (on the off-chance that they are reading) to please continue to keep the feedback format consistent in the future and I encourage them to publish all of the feedback in an anonymised form. I would also encourage anyone doing conference speaking to track their conference feedback in the same way that I am doing so that you get an insight into whether or not you are improving over time. It is not difficult to setup and maintaining it as you do more sessions takes very little effort. Storing feedback data like this leads me to wider thoughts about well-known conventions and data format standardisation. Let’s imagine a utopia where there were a standard set of questions for capturing session feedback that were leveraged at every conference regardless of subject matter, location or culture; that would give rise to immense cross-conference and cross-discipline analysis – the data analyst in me goes giddy at the thought of it. It is scenarios like this that drive my interest both in data formats such as iCalendar, microformats and RDF, and in emerging movements such as the semantic web and linked data, all things which I have written about in the past. I don’t know whether we will ever reach the stage where every piece of data has structured, descriptive metadata associated with it but I live in hope. @Jamiet

  Read the article

• RTS Game Style Application [closed]

  - by Daniel Wynand van Wyk

  My question may seem somewhat odd, but I hope that my specifications will clarify EXACTLY what it is that I am after. I need some help choosing the right tooling for a particular endeavour. My background is in desktop application development and large back-end systems. I have worked primarily on the Microsoft stack using C# and the .Net framework. My goal is to develop a 2D, RTS style, interactive office simulation. The simulation will model various office spaces, office equipment, employees and their interactions with one another. The idea is to abstract the concept of an office completely. Under the hood the application will do many things that are nothing like a game. This includes P2P networking, VPN tunnelling, streaming video, instant messaging, document collaboration, remote screen sharing, file-sharing, virus scanning, VOIP, document scanning, faxing, emailing, distributed computing, content management and much more! A somewhat similar thing has been attempted by IBM, where they created a virtual office in second life. If their attempt was a game, the game-play would be notably horrible, to say the least! The users/players will drive and control my application through the various objects modelled in the simulation. A single application capable of performing all of these various tasks would be a nightmare to navigate for even the most expert user. Using the concept of a game, I can easily separate functionality by assigning them to objects that relate 1-1 with their real world counter-parts. This can greatly simplify computing for novice users, with many added benefits in terms of visibility, transparency of process and centralized configuration. My hope is to make complex computing tasks accessible to all kinds of users and to greatly reduce the cognitive load associated with using the many different utilities and applications inside office settings. The complexity is therefore limited to the complexity of the space in which you find yourself. I want the application to target as many platforms as possible and run on computers that have no accelerated graphics capabilities. The simulation won't contain any of the fancy eye-candy you find in modern games, to the contrary, my "game" will purposefully be clean and simple. The closest thing I could imagine would be an old game like "Theme Hospital" or the first instalment of "The Sims". All the content will be pre-created and not user-generated like Second Life. New functionality will be added via a plugin system. Given my background and nature of my "game", I would like to spend most of my time writing code that does not have to do with the simulated office, as the "game" is really just a glorified application menu. I have done much reading about existing engines, frameworks and tools. I need the help of an experienced game developer who has tried and tested various products over the years who can guide me in the right direction given my very particular needs. I would appreciate any help I can get!

  Read the article

• IPS Package Groups

  - by Alan_Solaris_RE

  IPS group packages consist solely of dependencies on other packages that make up a logical grouping of software. These are similar to, but not the equivalent of, Solaris 10 metaclusters. The main difference is that metaclusters are nested subsets ranging from a minimal install to nearly all packages on the media. Group packages have no such hierarchy. They can overlap other groups, or be completely disjoint sets. A group dependency is set this way in an IPS package manifest file: depend fmri=full/pkg/name type=group Current Solaris Groups Solaris currently has 4 system groups defined. These are used for different types of installation, and are included in the xml manifest files used by the various Solaris installers: Package Name Summary Description Default Installation For:  group/system/solaris-desktop Oracle Solaris Desktop Provides an Oracle Solaris desktop environment Live Media  group/system/solaris-large-server Oracle Solaris Large Server Provides an Oracle Solaris large server environment Text Installer  group/system/solaris-small-server Oracle Solaris Small Server Provides a useful command-line Oracle Solaris environment  Zones  group/system/solaris-auto-install  Oracle Solaris Automated Installer Client  Provides an Oracle Solaris Automated Installer client  Automated Installer There are also several "feature" groups such as AMP and GNU Developer Tools. These are provided for convenience, but are not used directly by any installers. Retrieving Group Package Information A listing of all current groups can be found with the command: pkg info -r group/* A listing of all the packages in a group can be obtained with: pkg contents -o fmri -H -rt depend -a type=group groupname An example: $ pkg contents -o fmri -H -rt depend -a type=group solaris-desktop archiver/gnu-tar audio/audio-utilities codec/flac codec/libtheora codec/ogg-vorbis codec/speex communication/im/pidgin etc. You can determine which package group is currently installed on your system: $ pkg list group/system/\* Output would look like: NAME (PUBLISHER) VERSION IFO group/system/solaris-desktop 0.5.11-0.175.0.0.0.0.0 i-- Note that there are not version numbers associated with a group package dependency. The package version that best fits the system will be used, based on other dependencies such as what is listed in incorporation files. Installing a Group To Install a group, simple use the group package name as you would any other package: $ pkg install solaris-small-server  If you want to exclude a package from installing, you can use the --reject flag: $ pkg install --reject audio/audio-utilities solaris-desktop Creating Your Own Group To create your own group package, you can follow the pkg(5) documentation on how to create a package, and use this action for each package that is part of your group:   depend fmri=full/pkg/name type=group

  Read the article

• Nails vs Screws (C# List vs Dictionary)

  - by MarkPearl

  General This may sound like a typical noob statement, but I’m finding out in a very real way that just because you have a solution to a problem, doesn’t necessarily mean it is the best solution. This was reiterated to me when a friend of mine suggested I look at using Dictionaries instead of Lists for a particular problem – he was right, I have always just assumed that because lists solved my problem I did not need to look elsewhere. So my new manifesto to counter this ageless problem is as follows… Look for a solution that will logically work Once you have a solution look for possible alternatives Decide why your current solution is the best approach compared to the alternatives If it is.. use it till something better comes along, if it isnt…. change What’s the difference between Lists & Dictionaries Both lists and dictionaries are used to store collections of data. Assume we had the following declarations… var dic = new Dictionary<string, long>(); var lst = new List<long>(); long data;   With a list, you simply add the item to the list and it will add the item to the end of the list. lst.Add(data); With a dictionary, you need to specify some sort of key and the data you want to add so that it can be uniquely identified. dic.Add(uniquekey, data);   Because with a dictionary you now have unique identifier, in the background they provide all sort’s of optimized algorithms to find your associated data. What this means is that if you are wanting to access your data it is a lot faster than a List. So when is it appropriate to use either class? For me, if I can guarantee that each item in my collection will have a unique identifier, then I will use Dictionaries instead of Lists as there is a considerable performance benefit when accessing each data item. If I cannot make this sort of guarantee, then by default I will use a list. I know this is all really basic, and I hope I haven’t missed some fundamental principle… If anyone would like to add their 2 cents, please feel free to do so…

  Read the article

• More elegant way to avoid hard coding the format of a a CSV file?

  - by dsollen

  I know this is trivial issue, but I just feel this can be more elegant. So I need to write/read data files for my program, lets say they are CSV for now. I can implement the format as I see fit, but I may have need to change that format later. The simply thing to do is something like out.write(For.getValue()+","+bar.getMinValue()+","+fi.toString()); This is easy to write, but obviously is guilty of hard coding and the general 'magic number' issue. The format is hard-coded, requires parsing of the code to figure out the file format, and changing the format requires changing multiple methods. I could instead have my constants specifying the location that I want each variable to be saved in the CSV file to remove some of the 'magic numbers'; then save/load into the an array at the location specified by the constants: int FOO_LOCATION=0; int BAR_MIN_VAL_LOCATION=1; int FI_LOCATION=2 int NUM_ARGUMENTS=3; String[] outputArguments=new String[NUM_ARGUMENTS]; outputArguments[FOO_LOCATION] = foo.getValue(); outputArgumetns[BAR_MIN_VAL_LOCATION] = bar.getMinValue(); outptArguments[FI_LOCATOIN==fi.toString(); writeAsCSV(outputArguments); But this is...extremely verbose and still a bit ugly. It makes it easy to see the format of existing CSV and to swap the location of variables within the file easily. However, if I decide to add an extra value to the csv I need to not only add a new constant, but also modify the read and write methods to add the logic that actually saves/reads the argument from the array; I still have to hunt down every method using these variables and change them by hand! If I use Java enums I can clean this up slightly, but the real issue is still present. Short of some sort of functional programming (and java's inner classes are too ugly to be considered functional) I still have no obvious way of clearly expressing what variable is associated with each constant short of writing (and maintaining) it in the read/write methods. For instance I still need to write somewhere that the FOO_LOCATION specifies the location of foo.getValue(). It seems as if there should be a prettier, easier to maintain, manner for approaching this? Incidentally, I'm working in java at the moment, however, I am interested conceptually about the design approach regardless of language. Some library in java that does all the work for me is definitely welcome (though it may prove more hassle to get permission to add it to the codebase then to just write something by hand quickly), but what I'm really asking is more about how to write elegant code if you had to do this by hand.

  Read the article

• Are closures with side-effects considered "functional style"?

  - by Giorgio

  Many modern programming languages support some concept of closure, i.e. of a piece of code (a block or a function) that Can be treated as a value, and therefore stored in a variable, passed around to different parts of the code, be defined in one part of a program and invoked in a totally different part of the same program. Can capture variables from the context in which it is defined, and access them when it is later invoked (possibly in a totally different context). Here is an example of a closure written in Scala: def filterList(xs: List[Int], lowerBound: Int): List[Int] = xs.filter(x => x >= lowerBound) The function literal x => x >= lowerBound contains the free variable lowerBound, which is closed (bound) by the argument of the function filterList that has the same name. The closure is passed to the library method filter, which can invoke it repeatedly as a normal function. I have been reading a lot of questions and answers on this site and, as far as I understand, the term closure is often automatically associated with functional programming and functional programming style. The definition of function programming on wikipedia reads: In computer science, functional programming is a programming paradigm that treats computation as the evaluation of mathematical functions and avoids state and mutable data. It emphasizes the application of functions, in contrast to the imperative programming style, which emphasizes changes in state. and further on [...] in functional code, the output value of a function depends only on the arguments that are input to the function [...]. Eliminating side effects can make it much easier to understand and predict the behavior of a program, which is one of the key motivations for the development of functional programming. On the other hand, many closure constructs provided by programming languages allow a closure to capture non-local variables and change them when the closure is invoked, thus producing a side effect on the environment in which they were defined. In this case, closures implement the first idea of functional programming (functions are first-class entities that can be moved around like other values) but neglect the second idea (avoiding side-effects). Is this use of closures with side effects considered functional style or are closures considered a more general construct that can be used both for a functional and a non-functional programming style? Is there any literature on this topic? IMPORTANT NOTE I am not questioning the usefulness of side-effects or of having closures with side effects. Also, I am not interested in a discussion about the advantages / disadvantages of closures with or without side effects. I am only interested to know if using such closures is still considered functional style by the proponent of functional programming or if, on the contrary, their use is discouraged when using a functional style.

  Read the article

• Understanding exceptional cases

  - by Justin

  I've been studying the use of exceptions in various php projects (such as Doctrine and Zend Framework). Exceptions seem to be thrown when unordinary input/state occurs. A perfect example is Doctrine throwing an exception when you try to use a invalid query string. I think the creators of the doctrine api understood that first, you can't query data by using an invalid DQL statement, and a developer should immediately be warned that an error has occurred, rather then letting execution continue with the possibility of an error code going un-checked. I also bet that this simplifies reading the code. I can't think of a situation where you would want to use an invalid DQL statement, except unit testing. Since this is true, it's better to avoid plaguing a bunch of code with null/error checks and use exceptions. I've read in books that exceptions shouldn't be thrown when validating dating user input. I've seen examples where of where the guideline is broken. One example is the Zend framework. If supplying an invalid controller or action name, an exception is thrown. Unlike doctrine, the user has more direct control over this sort of input. I know you can configure an error controller and set up a 404 message or what have you, but I'm curious why they have used an exception in this scenario? I guess you can argue the Zend Framework does not know how to continue processing the quest. One last example Is I wrote a function to return some html based on a given resource type. This resource type is hard-coded and sent when a user interacts with a web site (such as clicking a button to display the form to input data). I don't expect users to be mucking around with the request type. Under normal operating conditions, the resource type should be valid. To clean up some logic, I was going to throw an exception if a particular form wasn't found. This is mainly to find the correct form associated with a resource type so proper validation can occur. Does this sound like a valid use case for an exception? Right now it's pretty trivial, but I do plan to implement a restful consumer and re-using a function to map resources to their validation services would be very useful. I can then catch the exception and based on the consumer, return an error message suitable for the request type...

  Read the article

• Code Design question, circular reference across classes?

  - by dsollen

  I have no code here, as this is more of a design question (I assume this is still the best place to ask it). I have a very simple server in java which stores a mapping between certain values and UUID which are to be used by many systems across multiple platforms. It accepts a connection from a client and creates a clientSocket which stores the socket and all the other relevant data unique to that connection. Each clientSocket will run in their own thread and will block on the socket waiting for a read. I expect very little strain on this system, it will rarely get called, but when it does get a call it will need to respond quickly and due to the risk of it having a peak time with multiple calls coming in at once threaded is still better. Each thread has a reference to a Mapper class which stores the mapping of UUID which it's reporting to others (with proper synchronization of course). This all works until I have to add a new UUID to the list. When this happens I want to report to all clients that care about that particular UUID that a new one was added. I can't multicast (limitation of the system I'm running on) so I'm having each socket send the message to the client through the established socket. However, since each thread only knows about the socket it's waiting on I didn't have a clear method of looking up every thread/socket that cares about the data to inform them of the new UUID. Polling is out mostly because it seems a little too convoluted to try to maintain a list of newly added UUID. My solution as of now is to have the 'parent' class which creates the mapper class and spawns all the threads pass itself as an argument to the mapper. Then when the mapper creates a new UUID it can make a call to the parent class telling it to send out updates to all the other sockets that care about the change. I'm concerned that this may be a bad design due to the use of a circular reference; parent has a reference to mapper (to pass it to new ClientSocket threads) and mapper points to parent. It doesn't really feel like a bad design to me but I wanted to check since circular references are suppose to be bad. Note: I realize this means that the thread associated with whatever socket originally received the request that spawned the creation of a UUID is going to pay the 'cost' of outputting to all the other clients that care about the new UUID. I don't care about this; as I said I suspect the client to receive only intermittent messages. It's unlikely for one socket to receive multiple messages at one time, and there won't be that many sockets so it shouldn't take too long to send messages to each of them. Perhaps later I'll fix the fact that I'm saddling higher work load on whatever unfortunate thread gets the first request; but for now I think it's fine.

  Read the article

• What is the recommended way to output values to FBO targets? (OpenGL 3.3 + GLSL 330)

  - by datSilencer

  I'll begin by apologizing for any dumb assumptions you might find in the code below since I'm still pretty much green when it comes to OpenGL programming. I'm currently trying to implement deferred shading by using FBO's and their associated targets (textures in my case). I have a simple (I think :P) geometry+fragment shader program and I'd like to write its Fragment Shader stage output to three different render targets (previously bound by a call to glDrawBuffers()), like so: #version 330 in vec3 WorldPos0; in vec2 TexCoord0; in vec3 Normal0; in vec3 Tangent0; layout(location = 0) out vec3 WorldPos; layout(location = 1) out vec3 Diffuse; layout(location = 2) out vec3 Normal; uniform sampler2D gColorMap; uniform sampler2D gNormalMap; vec3 CalcBumpedNormal() { vec3 Normal = normalize(Normal0); vec3 Tangent = normalize(Tangent0); Tangent = normalize(Tangent - dot(Tangent, Normal) * Normal); vec3 Bitangent = cross(Tangent, Normal); vec3 BumpMapNormal = texture(gNormalMap, TexCoord0).xyz; BumpMapNormal = 2 * BumpMapNormal - vec3(1.0, 1.0, -1.0); vec3 NewNormal; mat3 TBN = mat3(Tangent, Bitangent, Normal); NewNormal = TBN * BumpMapNormal; NewNormal = normalize(NewNormal); return NewNormal; } void main() { WorldPos = WorldPos0; Diffuse = texture(gColorMap, TexCoord0).xyz; Normal = CalcBumpedNormal(); } If my render target textures are configured as: RT1:(GL_RGB32F, GL_RGB, GL_FLOAT, GL_TEXTURE0, GL_COLOR_ATTACHMENT0) RT2:(GL_RGB32F, GL_RGB, GL_FLOAT, GL_TEXTURE1, GL_COLOR_ATTACHMENT1) RT3:(GL_RGB32F, GL_RGB, GL_FLOAT, GL_TEXTURE2, GL_COLOR_ATTACHMENT2) And assuming that each texture has an internal format capable of contaning the incoming data, will the fragment shader write the corresponding values to the expected texture targets? On a related note, do the textures need to be bound to the OpenGL context when they are Multiple Render Targets? From some Googling, I think there are two other ways to output to MRTs: 1: Output each component to gl_FragData[n]. Some forum posts say this method is deprecated. However, looking at the latest OpenGL 3.3 and 4.0 specifications at opengl.org, the core profiles still mention this approach. 2: Use a typed output array variable for the expected type. In this case, I think it would be something like this: out vec3 [3] output; void main() { output[0] = WorldPos0; output[1] = texture(gColorMap, TexCoord0).xyz; output[2] = CalcBumpedNormal(); } So which is then the recommended approach? Is there a recommended approach at all if I plan to code on top of OpenGL 3.3? Thanks for your time and help!

  Read the article

• Is it appropriate to try to control the order of finalization?

  - by Strilanc

  I'm writing a class which is roughly analogous to a CancellationToken, except it has a third state for "never going to be cancelled". At the moment I'm trying to decide what to do if the 'source' of the token is garbage collected without ever being set. It seems that, intuitively, the source should transition the associated token to the 'never cancelled' state when it is about to be collected. However, this could trigger callbacks who were only kept alive by their linkage from the token. That means what those callbacks reference might now in the process of finalization. Calling them would be bad. In order to "fix" this, I wrote this class: public sealed class GCRoot { private static readonly GCRoot MainRoot = new GCRoot(); private GCRoot _next; private GCRoot _prev; private object _value; private GCRoot() { this._next = this._prev = this; } private GCRoot(GCRoot prev, object value) { this._value = value; this._prev = prev; this._next = prev._next; _prev._next = this; _next._prev = this; } public static GCRoot Root(object value) { return new GCRoot(MainRoot, value); } public void Unroot() { lock (MainRoot) { _next._prev = _prev; _prev._next = _next; this._next = this._prev = this; } } } intending to use it like this: Source() { ... _root = GCRoot.Root(callbacks); } void TransitionToNeverCancelled() { _root.Unlink(); ... } ~Source() { TransitionToNeverCancelled(); } but now I'm troubled. This seems to open the possibility for memory leaks, without actually fixing all cases of sources in limbo. Like, if a source is closed over in one of its own callbacks, then it is rooted by the callback root and so can never be collected. Presumably I should just let my sources be collected without a peep. Or maybe not? Is it ever appropriate to try to control the order of finalization, or is it a giant warning sign?

  Read the article

• Best practice for organizing/storing character/monster data in an RPG?

  - by eclecto

  Synopsis: Attempting to build a cross-platform RPG app in Adobe Flash Builder and am trying to figure out the best class hierarchy and the best way to store the static data used to build each of the individual "hero" and "monster" types. My programming experience, particularly in AS3, is embarrassingly small. My ultra-alpha method is to include a "_class" object in the constructor for each instance. The _class, in turn, is a static Object pulled from a class created specifically for that purpose, so things look something like this: // Character.as package { public class Character extends Sprite { public var _strength:int; // etc. public function Character(_class:Object) { _strength = _class._strength; // etc. } } } // MonsterClasses.as package { public final class MonsterClasses extends Object { public static const Monster1:Object={ _strength:50, // etc. } // etc. } } // Some other class in which characters/monsters are created. // Create a new instance of Character var myMonster = new Character(MonsterClasses.Monster1); Another option I've toyed with is the idea of making each character class/monster type its own subclass of Character, but I'm not sure if it would be efficient or even make sense considering that these classes would only be used to store variables and would add no new methods. On the other hand, it would make creating instances as simple as var myMonster = new Monster1; and potentially cut down on the overhead of having to read a class containing the data for, at a conservative preliminary estimate, over 150 monsters just to fish out the one monster I want (assuming, and I really have no idea, that such a thing might cause any kind of slowdown in execution). But long story short, I want a system that's both efficient at compile time and easy to work with during coding. Should I stick with what I've got or try a different method? As a subquestion, I'm also assuming here that the best way to store data that will be bundled with the final game and not read externally is simply to declare everything in AS3. Seems to me that if I used, say, XML or JSON I'd have to use the associated AS3 classes and methods to pull in the data, parse it, and convert it to AS3 object(s) anyway, so it would be inefficient. Right?

  Read the article

• How best to look up objects by label?

  - by dsollen

  I am writing the server backed by a pre-written API. I'm going to get a number of strings representing ports, signals, paths, etc etc etc. I need to look up the object associated with a given label, these objects are all in memory (no sql magic to do this for me). My question is, how best do I associate a given unique label with the mutable object it represents? I have enough objects that looking through every signal or every port to find the one that matches is possible, but may be slightly too slow. To be honest the direct 'look at every object' method is probably good enough for so small a body of objects and anything else is premature optimization, but I still am curious what the proper solution would be if I thought my signals were going to grow a bit larger. As I see it there are two options available. First would be to to create a 'store' that is a simple map between object and label. I could have it so that every time I call addObject the object is automatically saved into a hashmap or the like. This works, but relies on my properly adding and deleting each object so the map doesn't grow indefinitely. The biggest issue to me is that this involves having some hidden static map in my ModelObject class that just feels...wrong somehow. The other option is to have some method that can interpret the labels. All of these labels are derived from the underlying objects. So I can look at the signal label, for instance, and say "these 20 characters are the port" to figure out what port I need. This would allow me to quickly figure out what I need. However, if the label method is changed the translateLabelToObject method needs to be updated as well or everything breaks. Which solution is cleaner, or possibly a cleaner solution than either of above? For the record I'm working with sufficient number of variables to make direct comparison a little slow, but not enough to be concerned about memory overhead, written in java. All objects that have labels I need to look up extend the same parent class.

  Read the article

• Cloud Computing Business Benefits

  - by workflowman

  If you have been living under a rock for the past year, you wouldn't have heard about cloud computing. Cloud computing is a loose term that describes anything that is hosted in data centers and accessed via the internet. It is normally associated with developers who draw clouds in diagrams indicating where services or how systems communicate with each other. Cloud computing also incorporates such well-known trends as Web 2.0 and Software as a Service (SaaS) and more recently Infrastructure as a Service (IaaS) and Platform as a Service (PaaS). Its aim is to change the way we compute, moving from traditional desktop and on-premises servers to services and resources that are hosted in the cloud.  Benefits of Cloud Computing  There are clearly benefits in building applications using cloud computing, some of which are listed here:  Zero up- front investment:  Delivering a large-scale system costs a fortune in both time and money. Often IT departments are split into hardware/network and software services. The hardware team provisions servers and so forth under the requirements of the software team. Often the hardware team has a different budget that requires approval. Although hardware and software management are two separate disciplines, sometimes what happens is developers are given the task to estimate CPU cycles, disk space, and so forth, which ends up in underutilized servers.  Usage-based costing:  You pay for what you use, no more, no less, because you never actually own the server. This is similar to car leasing, where in the long run you get a new car every three years and maintenance is never a worry.  Potential for shrinking the processing time:  If processes are split over multiple machines, parallel processing is performed, which decreases processing time.  More office space:  Walk into most offices, and guaranteed you will find a medium- sized room dedicated to servers.  Efficient resource utilization:  The resource utilization is handed by a centralized cloud administrator who is in charge of deciding exactly the right amount of resources for a system. This takes the task away from local administrators, who have to regularly monitor these servers.  Just-in-time infrastructure:  If your system is a success and needs to scale to meet demand, this can cause further time delays or a slow- performing service. Cloud computing solves this because you can add more resources at any time.  Lower environmental impact:  If servers are centralized, potentially an environment initiative is more likely to succeed. As an example, if servers are placed in sunny or windy parts of the world, then why not use these resources to power those servers?  Lower costs:  Unfortunately, this is one point that administrators will not like. If you have people administrating your e-mail server and network along with support staff doing other cloud-based tasks, this workforce can be reduced. This saves costs, though it also reduces jobs.

  Read the article

• How to Export a Contact to and Import a Contact from a vCard (.vcf) File in Outlook 2013

  - by Lori Kaufman

  vCard is the abbreviation for Virtual Business Card and is the standard format (.vcf files) for electronic business cards. vCards allow you to create and share contact information over the internet, such as in email messages and instant messaging. You can also use vCards to move contact information from one email or personal information management program to another, as long as both programs support the .vcf file format. vCards can contain name and address information, as well as phone numbers, email addresses, URLs, images, and audio clips. We will show you how to export a contact to and import a contact from a vCard, or .vcf file, in Outlook. First access the People section by clicking People at the bottom of the Outlook window. To view your contact in business card format, click Business Card in the Current View section of the Home tab. Select a contact by clicking on the name bar at the top of the business card. To export the selected contact as a vCard, click the File tab. On the Account Information screen, click Save As in the list of options on the left. The Save As dialog box displays. By default, the name of the contact is used to name the .vcf file in the File name edit box. Change the name, if desired, select a location for the file, and click Save. The contact is saved as a .vcf file. To import a vCard, or .vcf file, into Outlook, simply double-click on the .vcf file. By default, .vcf files are automatically associated with Outlook, so the file is opened in Outlook as a Contact. Make any changes or additions to the contact in the contact editing window. To save the contact, click Save & Close in the Actions section of the Contact tab. NOTE: Notice that because this contact is new, the full contact editing window displays rather than the Contact Card that displays when double-clicking on a contact. You can open the full contact editing window instead of the Contact Card when editing a contact or searching for a contact. The contact is added to the Contacts folder. You can add your contact information to a signature in business card format, and it will display as shown above in emails. We have covered how to create signatures and will be discussing more about signatures and business cards in Outlook.     

  Read the article

• The Minimalist Approach to Content Governance - Manage Phase

  - by Kellsey Ruppel

  Originally posted by John Brunswick. Most people would probably agree that creating content is the enjoyable part of the content life cycle. Management, on the other hand, is generally not. This is why we thankfully have an opportunity to leverage meta data, security and other settings that have been applied or inherited in the prior parts of our governance process. In the interests of keeping this process pragmatic, there is little day to day activity that needs to happen here. Most of the activity that happens post creation will occur in the final "Retire" phase in which content may be archived or removed. The Manage Phase will focus on updating content and the meta data associated with it - specifically around ownership. Often times the largest issues with content ownership occur when a content creator leaves and organization or changes roles within an organization.   1. Update Content Ownership (as needed and on a quarterly basis) Why - Without updating content to reflect ownership changes it will be impossible to continue to meaningfully govern the content. How - Run reports against the meta data (creator and department to which the creator belongs) on content items for a particular user that may have left the organization or changed job roles. If the content is without and owner connect with the department marked as responsible. The content's ownership should be reassigned or if the content is no longer needed by that department for some reason it can be archived and or deleted. With a minimal investment it is possible to create reports that use an LDAP or Active Directory system to contrast all noted content owners versus the users that exist in the directory. The delta will indicate which content will need new ownership assigned. Impact - This implicitly keeps your repository and search collection clean. A very large percent of content that ends up no longer being useful to an organization falls into this category. This management phase (automated if possible) should be completed every quarter or as needed. The impact of actually following through with this phase is substantial and will provide end users with a better experience when browsing and searching for content.

  Read the article

• Deleted Myself from Admin Group - Now Getting Error usermod: cannot lock /etc/passwd; try again later

  - by BubbaJ

  I have a laptop with Ubuntu 11.10 that is shared between myself and two other family members. My user id was setup as the only "Administrator" on the laptop. The other users were setup as "Standard" users. In my attempt to try to add myself to the user groups for the other users, I somehow deleted myself from the admin groups. I used the "usermod" command from the terminal. I must have neglected to include the proper switches or syntax for the update. It looks like I successfully added my userid to the group associated with my wife's account. When I use the "groups" command, I can see only my id and my wife's id in the list. I no longer see the "admin" or "adm" groups, and others that used to be listed. When I go into System Settings User Accounts it looks like my ID is now listed as a "Standard" user. I would like to change my account back to "Administrator", but now I can't. I did some searches for solutions and found that I would need to boot into Recovery Mode and execute the usermod command from the root session. I was able to successfully boot into Recovery Mode and get to the root session. I was trying to execute the command "usermod -a -G admin user1" to add my id (user1) back to the admin group. When I execute the command from the root session, I get the error message "usermod: cannot lock /etc/passwd; try again later". I tried preceding the usermod command with "sudo", but it didn't make a difference, same error. I then tried adding a new user using adduser, thinking I would try to create a new userid and make the new userid part of the admin group. I get the same error using the adduser command. I saw some posts that recommend looking for and deleting files that end in ".lock" in the etc directory. The only file I found was .pwd.lock which I haven't touched. I am at a loss as to what to try next. I am relatively inexperienced with Ubuntu and Linux, so alot of this is new to me. Any help you can provide would be much appreciated.

  Read the article

• LSI RAID monitor reports "Consistency Check inconsistency logging disabled"

  - by carlpett

  I have a server with a LSI MegaRAID 9261-8i controller. Recently I started getting alerts like this one: Controller ID: 1 Consistency Check inconsistency logging disabled, too many inconsistencies on VD: 0 Generated on:Sat May 12 04:06:40 2012 SYSTEM DETAILS--- IP Address: 192.168.1.29 OS Name: Windows 7 x64 OS Version: 6.01 Driver Name: megasas.sys Driver Version: 4.5.1.64 IMAGE DETAILS--- BIOS Version: 2.120.33-1197 Firmware Package Version: 12.12.0-0045 Firmware Version: 3.21.00_4.11.05.00_0x05000000 VD 0 is a RAID mirror containing the system disk. I have searched and read, but cannot find any trace of how to actually do anything about this. I tried running a scandisk but that did not find anything (as I expected, since scandisk reads the disks as exposed by the controller, right?). The MegaRAID Storage Manager does not as far as I can see have any options for checking or fixing physical disks. The program claims the VD is "healty", and both disks have Error count 0. Also a bit strange is the System details in the message... The IP address is associated with the RAS (dial in) interface, and the OS should be Windows Server 2011 SBS. Has anyone else experienced this before? What can be done?

  Read the article

• How do I upgrade django on ubuntu 9.04?

  - by Lorin Hochstein

  I've got Django 1.0.2 installed on Ubuntu 9.04. I'd like to upgrade Django, because I have an app that needs Django 1.1 or greater. I tried using pip to do the upgrade, but got the following: $ sudo pip install Django==1.1 Downloading/unpacking Django==1.1 Downloading Django-1.1.tar.gz (5.6Mb): 5.6Mb downloaded Running setup.py egg_info for package Django Installing collected packages: Django Found existing installation: Django 1.0.2-final Not uninstalling Django at /var/lib/python-support/python2.6, outside environment /usr Running setup.py install for Django changing mode of build/scripts-2.6/django-admin.py from 644 to 755 changing mode of /usr/local/bin/django-admin.py to 755 Successfully installed Django It seems like it worked, but it refuses to remove the original Django 1.02, and sure enough: $ pip freeze | grep -i django Django==1.0.2-final django-debug-toolbar==0.8.3 django-sphinx==2.2.3 $ /usr/local/bin/django-admin.py --version 1.0.2 final The problem, apparently, is that pip won't uninstall files outside of /usr. I'd like to remove the existing Django files manually, but I have no idea how to do that, because I'm unfamiliar with how Python packages are laid out in Ubuntu. It looks pretty complicated. The site-packages directory is: $ python -c "from distutils.sysconfig import get_python_lib; print get_python_lib()" /usr/lib/python2.6/dist-packages However, that's not where the django files live: $ ls -ld /usr/lib/python2.6/dist-packages/[Dd]jango* ls: cannot access /usr/lib/python2.6/dist-packages/[Dd]jango*: No such file or directory There's a /var/lib/python-support/python2.6/django directory, and the __init__.py file in that directory points to /usr/share/python-support/python-django/django/__init__.py. Clearly, pip is able to figure out where the files live. Is there any way to retrieve the list of files associated with the django package so I can just delete them manually?

  Read the article

• Connecting Adium to Google Talk with a 2-factor authentication account isn’t working

  - by Robin

  Anyone else having this problem? After turning on 2-factor authentication on my Google Account I stopped being able to log in through Adium (Mac IM client that uses Pidgin’s libpurple for IM). Obviously you need to generate an application-specific password but these won’t let me log in. Application specific passwords work with other applications (e.g. Reeder for feeds and calendering on my phone). Google specifically mention Adium in their examples of setting up an application password for Google Talk so I doubt it’s a generic Adium problem. I can still access Google Talk for this account if I use a talk widget on a Google Website (Plus, or iGoogle for example). My bug report to Adium including a connection log file is up on their Trac: http://trac.adium.im/ticket/15310 . No activity there though. I also asked around in their IRC channel but no-one else could replicate the problem. If I had to guess then I’d think it was a consequence of me not having a GMail account associated with my Google account. I don’t see exactly why that would cause it, but it seems like a fairly unusual setup that might not have been tested for.

  Read the article

• Cisco adaptive security appliance is dropping packets where SYN flag is not set

  - by Brett Ryan

  We have an apache instance sitting inside our DMZ which is configured to proxy requests to an internal NATed tomcat instance inside our network. It works fine, but then all of a sudden requests from apache to the tomcat instance stop getting through with the following in the apache logs: [error] (70007)The timeout specified has expired: ajp_ilink_receive() can't receive header Investigating into the Cisco log viewer reveals the following: Error Message %ASA-6-106015: Deny TCP (no connection) from IP_address/port to IP_address/port flags tcp_flags on interface interface_name. Explanation The adaptive security appliance discarded a TCP packet that has no associated connection in the adaptive security appliance connection table. The adaptive security appliance looks for a SYN flag in the packet, which indicates a request to establish a new connection. If the SYN flag is not set, and there is not an existing connection, the adaptive security appliance discards the packet. Recommended Action None required unless the adaptive security appliance receives a large volume of these invalid TCP packets. If this is the case, trace the packets to the source and determine the reason these packets were sent. All are machines are virtualised using VMware, and by default machines have been using the Intel E1000 emulated NIC. Our network administrator has changed this to a VMXNET3 driver in an attempt to correct the problem, we just have to wait and see if the problem persists as it's an intermittent problem. Is there something else that could be causing this problem? This isn't the first service where we have had similar issues. Our apache host is running Ubuntu 11.10 with a kernel version of 3.0.0-17-server. We have also had this issue on RHEL5 (5.8) running kernel 2.6.18-308.16.1.el5, this machine also has the E1000 NIC. NOTE: I am not a network administrator and am a software architect and analyst programmer responsible for these systems.

  Read the article

• Mac OS X Server (10.5) mail trapped in queue

  - by Meltemi

  We've got mail accumulating in our Leopard Server's queue and not sure exactly why. This machine has required little maintenance over the years so I'm hoping someone here spot the obvious and save us some time. Let me know what other information would be helfull. Server appears to be functioning normally except for "clogged" queue and the following error associated with each "trapped" message: Looking at messages in the queue each one states something like this: Message ID: 4213C3B8B3F Date: October 27, 2009 11:33:27 AM Size: 1824 Sender: [email protected] Recipient(s) & Status: ---------------------- [email protected]: connect to 127.0.0.1[127.0.0.1]: Connection refused Under SettingsRelay we have checked Accept SMTP relays only from these hosts and networks: 127.0.0.0/8 10.0.1.0/24 The mail in queue is addressed to users whose accounts are on this server. Mail.app on the client appears to be functioning normally and checking checking mail on the server. We did add a virtual domain some time ago but all that was working fine for some time... This just started happening recently...any ideas? Edit: toggling the filter services on and off seems to have fixed this except for 2 remaining queued messages that show "mail transport unavailable" as an error!?!

  Read the article

• Access All VLANS over XenServer Interface

  - by Garrett

  For my current setup, I have a physical NIC on a XenServer machine that receives traffic tagged with various VLAN IDs. I have a virtual machine that is running Vyatta that needs to be able to access both tagged and untagged traffic in order to route traffic. Here's the problem: 1) If I bind the NIC in XenCenter to the VM (which has no VLAN ID associated with it), the VM cannot see any tagged traffic. I have verified this using tcpdump. However, the tagged traffic is flowing into the XenServer machine perfectly fine. 2) I have more than 7 VLANs, so adding each VLAN as an interface within XenCenter isn't an option. 3) Even though tcpdump shows no tagged traffic coming in the VMs NIC, I have tried adding VLAN interfaces within Vyatta. This also doesn't work. I have tried using both Linux bridge and openvswitch setups and neither seem to work. I am running XenServer 6.0.3 free and Vyatta VC6.3. Please help! I've run out of ideas. I've googled for hours and can't seem to find anything.

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >