Search Results

Search found 4224 results on 169 pages for 'wireless n'.

Page 153/169 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• No Internet access while being connected to VPN using Cisco VPN Client 5.

  - by szeldon

  Hi, I have an access to corporate VPN using Cisco VPN Client 5.0.00:0340, but when I'm connected to it, I don't have an Internet access. I'm using Windows XP SP3. As it was suggested here http://forums.speedguide.net/showthread.php?t=209167 , I tried to enable "Allow local LAN Access" but it doesn't work. I also tried a second solution - deleting entry using "route" command, but it didn't help. I used "route delete 192.168.100.222". It's a third day of my attempts to solve this issue and I don't have an idea what else to do. I'm not very experienced in VPN stuff, but I know something about networking. Basing on my knowledge, I think that it's theoretically possible to achieve Internet access using my local network and only corporate stuff to be routed using VPN connection. I think that theoretically this should look like this: every IP being inside by corporation - VPN interface IP every other IP - my ethernet interface I've tried many possibilities of how to change those routes, but neither of them work. I'd really appreciate any help. My route configuration before connecting to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 192.168.101.254 192.168.100.222 10 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 1 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 1 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 3 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 192.168.101.254. =========================================================================== My route configuration after connection to VPN: =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 c0 a8 de 79 01 ...... Atheros AR5006EG Wireless Network Adapter - Teefer2 Miniport 0x10005 ...02 00 4c 4f 4f 50 ...... Microsoft Loopback Card 0x160003 ...00 17 42 31 0e 16 ...... Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller - Teefer2 Miniport 0x170006 ...00 05 9a 3c 78 00 ...... Cisco Systems VPN Adapter - Teefer2 Miniport =========================================================================== =========================================================================== Active routes: Network Destination Netmask Gateway Interface Metrics 0.0.0.0 0.0.0.0 10.251.6.1 10.251.6.51 1 10.0.0.0 255.255.255.0 10.0.0.10 10.0.0.10 30 10.0.0.0 255.255.255.0 10.251.6.1 10.251.6.51 10 10.0.0.10 255.255.255.255 127.0.0.1 127.0.0.1 30 10.1.150.10 255.255.255.255 192.168.101.254 192.168.100.222 1 10.251.6.0 255.255.255.0 10.251.6.51 10.251.6.51 20 10.251.6.51 255.255.255.255 127.0.0.1 127.0.0.1 20 10.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 30 10.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.100.0 255.255.254.0 192.168.100.222 192.168.100.222 10 192.168.100.0 255.255.254.0 10.251.6.1 10.251.6.51 10 192.168.100.222 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.100.255 255.255.255.255 192.168.100.222 192.168.100.222 10 213.158.197.124 255.255.255.255 192.168.101.254 192.168.100.222 1 224.0.0.0 240.0.0.0 10.0.0.10 10.0.0.10 30 224.0.0.0 240.0.0.0 10.251.6.51 10.251.6.51 20 224.0.0.0 240.0.0.0 192.168.100.222 192.168.100.222 10 255.255.255.255 255.255.255.255 10.0.0.10 10.0.0.10 1 255.255.255.255 255.255.255.255 10.251.6.51 10.251.6.51 1 255.255.255.255 255.255.255.255 192.168.100.222 192.168.100.222 1 255.255.255.255 255.255.255.255 192.168.100.222 2 1 Default gateway: 10.251.6.1. ===========================================================================

  Read the article

• how to wrap text in html?

  - by amanda

  in jquery accordion control I am displaying one image along with description.but description is coming below the image.I want to display inline with the image. my code- <div> <p> <!-- avatar --> <img src="images/manage.jpg" alt="" /> <!-- /avatar --> Airlink's Managed Services supports a "build-operate-transfer" model, enabling service providers to quickly and cost-effectively build out a large-scale, broadband wireless network by initially outsourcing operational functions to Pronto and eventually transferring operations in-house, if desired. </br></p> As part of the service, Airlink provides all the back-office operations for customers from its Network Operations Center (NOC), leveraging its leading UniFi OSS platform.</p> <p> <a href = "#" >Read More.. </a> </p> </div>

  Read the article

• Help needed in filling a questionnaire for dissertation will only take 5 minutes

  - by Ryan

  I am a Maltese student currently working on my dissertation which focuses on J2ME Wireless SOAP protocol. Since in my country i.e. Malta we don’t have professional mobile developers I had to turn myself to online questionnaires for my research methodology those of you who has done a thesis know what I am talking about ?. Please I anyone who has ever done any mobile development which concerns SOAP or any similar protocol used for web services, could you kindly answer my questionnaire as this is an essential core part of my thesis. Please respond with honesty and at your earliest convince since time is of top priority. Below is the link to the questionnaire: http://www.kwiksurveys.com/online-survey.php?surveyID=KHOHIO_c6f874da Thanks in advance

  Read the article

• BULK SMS, Long Codes (VMN MSIDN), T-mobile?

  - by John

  Does any US wireless carrier offer individuals or companies with a direct connection to the SMSC? The number is 747-772-3101 (repalce 7's with 6's) This number is registered to t-mobile, also verified by t-mobile to be a valid subscriber sending 160,000+ text messages monthly and that all they have is an unlimited text messaging plan on top of the cheapest voice plan. This company of the number verified to me that they don't use gsm modems as they are too slow. So I know it's possible but who would I contact, Sales or anyone else reachable through a 1-800 is ignorant to these services and developer.t-mobile is worthless and doesn't reply to emails. Any info??

  Read the article

• setting up a private network using linksys router

  - by user287745

  scenerio:- a database server running sql server 2005 and sql server management studio 2005 express editions a web server running IIS 5.0v using windows xp pro. two other computer having windows xp and windows 98 i have a linksys router which i use to access point for wireless (laptop) there are 5 sockets behind it four for clients and one for internet. i would like to setup a LAN- something like a private hosting area with two clients. would should i do? where to connect what and what would the changes in settnigs be. right now it uses dhcp or something to assign ips. where will the webserver be attached to the internet socket? where will the db server be attached? any guide, links, help thank you

  Read the article

• How to create an adhoc network between laptops in java?

  - by Muaz

  Hello, I want to create an adhoc between labtops were they will communicate using wireless communication. I will use java for this but still I do not know how to start.. I think I'll have to use sockets for the connections right? How will a laptop notice other laptops in its local network or the other way around? Do i need a server to handle the communication between laptops? Another thing, how to broadcast a message from one laptop to other laptops in the network? Please reply as soon as you can. Any help will be appreciated. Thanks in advance.

  Read the article

• Make errors - can the gcc compiler warnings prevent a C file from being compiled into an object file

  - by Xolstice

  I'm trying to compile a wireless network card driver for my Linux box and I ran into a problem with the Make command. During the compilation process I normally see warnings on some of the C files that being are compiled; despite the warnings these files were still able to be compiled to an object file. When the Make process comes to a file called rtmp_wext.c however, the compiler generates a large number of warnings and then the whole Make process stops and returns an exit status of error 1, i.e. make: *** [rtmp_wext.o] Error 1. Usually I see an error with the C file for compilation to halt. This is the first time where it seems compiler warnings are preventing the file from being turned into an object file; is this possible or is something else the cause for the unsuccessful compilation?

  Read the article

• Win XP cannot connect (or see) my wifi network, but can see others

  - by Jorre

  since yesterday I have a strange wifi problem with my pc. I have a wireless linksys router setup that worked fine for many months, now since yesterday my pc won't connect to the wifi signal anymore. The strange thing is, my macbook pro still connects fine. SSID is broadcasting, but my windows XP doens't see it, I have all signal modes set to "auto". Windows XP sees all my neighbours wifi networks, so the wifi card isn't broken or anything. Any idea what can be wrong here?

  Read the article

• Capturing network traffic on Linux

  - by Quandary

  Question: I have one Windows laptop, one Linux laptop and a wireless router. Now I want to "investigate" the hotmail/windows live protocol. What I want to do is route network traffic from the windows laptop via ethernet to the linux laptop, capture it on the Linux computer, forward it wirelessly to the router, receive the hotmail response from the router on the linux computer and forward it to the windows computer. How do I do that? In essence, switching the Linux laptop between the Windows laptop and the router, to capture network traffic ? Which program is best for capturing/analysing ? Please note that for whatever reason, packet capturing with winpcap on the windows computer doesn't work...

  Read the article

• Disable Bluetooth discoverable mode on Android

  - by Venator85

  Hi, I found in the Android documentation how to turn Bluetooth discoverability mode on: Intent discoverableIntent = new Intent(BluetoothAdapter.ACTION_REQUEST_DISCOVERABLE); discoverableIntent.putExtra(BluetoothAdapter.EXTRA_DISCOVERABLE_DURATION, 300); startActivity(discoverableIntent); This will make the device discoverable for 300 seconds (documentation). My question is: how to turn discoverability OFF before this timeout occurs? I'd like to replicate the corresponding setting in Settings|Wireless and networks|Bluetooth settings applet, that allows discoverability to be turned on and off with a click. Any help? Thanks ;)

  Read the article

• android settings (provider)?

  - by lorenzoff

  Hello to all, i'd like to substitute the default preferences setting activity (vertical, icon-title pair list) with a grid view that better fit a large landscape display. About, let's say, the audio preferences, i add an icon to a GridView and, on item click event, i use this code startActivityForResult(new Intent(android.provider.Settings.ACTION_SOUND_SETTINGS), 0); Is it possible to get the default settings icon? If i could use an ipotetic getDrawable(android.R.drawable.default_icon_for_audio_preferences_settings), I would to maintain the default icon also in my preferences grid. A preferences provider exists? Looking at my development device preferences i can see Wireless, call, audio, display and so on. I have to add the same preferences to my grid because i know a priori about their existence or there is a provider that can supply me this array? Thanks in advance L.

  Read the article

• How do I include a newline in a text message sent as email from an ASP.Net application?

  - by Tim Goodman

  I have an ASP.Net Application that sends text messages to mobile phones. It does this by sending an email. For instance, if your phone number is 555-555-5555 and your wireless carrier is Verizon, you can send an email to [email protected] and it will show up as a text message. I want to be able to include a newline in the body of the message. How do I do this? Also please note that my ASP.Net program gets the message from a database (MS SQL Server) so what I really need to know is what characters to include in the message body when I store it in my database. I already tried \n but it just showed up in the text message as \n

  Read the article

• MySQL does not work on localhost without Local Area Connection

  - by user985171

  I use WampServer(Apache, PHP, MySQL) and have no problems when some kind of network adapter(wireless or lan) is connected(i-e Local Area Connection has status connected) 'even if i am not connected to the internet'(for example when i am connected to the router but that is not connected to the internet). When there is no network connection, i get a php error like MySQL could not connect to 127.0.0.1 on port 3306. Interestingly, 'telnet 127.0.0.1 3306' says that it could not connect to the port, even when the server and MySQL are running fine(i-e when some kind of local area connection is connected). So i turned off all kinds of firewall(antivirus and windows) but still no difference in anything. And that is why this issue is quite puzzling. Things i have already tried(will update this list along the way):- -The skip-networking directive in my.ini.

  Read the article

• Browsing to Subversion repository location indicated in Apache conf file

  - by sonrael

  I have Subversion 1.6.6 and Apache 2.2.14 installed and working. I have made the following changes to the Apache httpd.conf file: #Uncommented by me for Subversion installation LoadModule dav_module modules/mod_dav.so LoadModule dav_fs_module modules/mod_dav_fs.so #Added by me for subversion installation LoadModule dav_svn_module modules/mod_dav_svn.so LoadModule authz_svn_module modules/mod_authz_svn.so < Location /svn DAV svn SVNPath C:\Users\RED\Repositories < /Location ...When I navigate to localhost Apache is working properly, but if I try to go to localhost/svn the browser just hangs waiting for a response from the server. What is supposed to happen here? Does it have to do with the fact that I'm behind a wireless router on a dynamic IP address (although I can access localhost no problem so...)? As you can see I'm on windows (Vista)

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by badnaam

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• Problem connecting to remote mysql database

  - by user361024

  I am trying to connect to a mysql db on a shared server. I am using a java application to make the connection. Problem doesn't happen when I connect to localhost db. URL = "jdbc:mysql://SHARED HOST IP:3306/DBNAME"; USER = "dbUSER"; PASS = "dbPASS"; Connection conn = DriverManager.getConnection(URL, USER, PASS); java.sql.SQLException: Access denied for user 'DBUSER'@'mycomputersIP???' (using password: YES) It is strange that it says denied for dbuser@ mycomputersip instead of dbuser@sharedhostIP Is there a setting on my wireless router that is screwing things up?

  Read the article

• Client-server application between two computers in the same network (using boost::asio)

  - by Edwin

  I'm trying to set up a basic communication between my desktop PC and my laptop (latter one using wireless connection) both being in the same network, using the boost::asio tutorials: synchronous client and synchronous server (in c++). When I run both the server and client on the same machine (using the localhost and the datetime port as parameters), it works splendidly. But if I try to set up the laptop as server (tested it with netstat -anb from the command prompt, it is indeed running and listening to port 13 as it's supposed to, and I even deactivated the firewall to make sure it doesn't cause any problems), I cannot connect to it with the client (set up on the PC), no matter what IP I tried (localhost, and basically any IPs that ipconfig -all gave me). So no matter what I tried, I cannot find the correct address that which the client can use to connect to the server. Could anyone help me please?

  Read the article

• Many network adapters at machine, need to find one that is used for traffic in Windows (from .net)

  - by viko

  My application use Web-service. I'm control from what workstation was request and for this send MAC-Address how parameter of all methods. But then I start testing application in real, I found workstations which have many network adapters - Ethernet, Wireless, Bluetooth. When I get MAC-address using next code: var networkAdapters = NetworkInterface.GetAllNetworkInterfaces(); if (networkAdapters == null || networkAdapters.Length == 0) return string.Empty; string address = string.Empty; foreach (var adapter in networkAdapters) { var a = adapter.GetPhysicalAddress(); if (a != null && a.ToString() != string.Empty) { address = a.ToString(); break; } } return address; Sometimes Web-service receive from workstation different MAC-Addresses, but I want get always only one MAC-address. Please, help me.

  Read the article

• Load balancing with multiple gateways

  - by ttouch

  I have to different ISPs, each on each own network. The main connects via ethernet and the secondary via wifi. The two networks have no relation at all. I just connect to them simultaneously. The reason I want to load balance between them is to achieve higher Internet speeds. Note: I have no advanced network hardware. Just my pc and the two routers that I have no access... main network: if: eth0 gw: 192.168.178.1 my ip: 192.168.178.95 speed: 400 kbit/s secondary network: if: wlan0 gw: 192.168.1.1 my ip: 192.168.1.95 speed: 300 kbit/s A diagram to explain the situation: http://i.imgur.com/NZdsv.jpg I'm on Arch Linux x64. I use netcfg to configure the interfaces Configs: # /etc/network.d/main CONNECTION='ethernet' DESCRIPTION='A basic static ethernet connection using iproute' INTERFACE='eth0' IP='static' ADDR='192.168.178.95' # /etc/network.d/second CONNECTION='wireless' DESCRIPTION='A simple WEP encrypted wireless connection' INTERFACE='wlan0' SECURITY='wep' ESSID='wifi_essid' KEY='the_password' IP="static" ADDR='192.168.1.95' And I use iptables to load balance, rules: #!/bin/bash /usr/sbin/ip route flush table ISP1 2>/dev/null /usr/sbin/ip rule del fwmark 101 table ISP1 2>/dev/null /usr/sbin/ip route add table ISP1 192.168.178.0/24 dev eth0 proto kernel scope link src 192.168.178.95 metric 202 /usr/sbin/ip route add table ISP1 default via 192.168.178.1 dev eth0 /usr/sbin/ip rule add fwmark 101 table ISP1 /usr/sbin/ip route flush table ISP2 2>/dev/null /usr/sbin/ip rule del fwmark 102 table ISP2 2>/dev/null /usr/sbin/ip route add table ISP2 192.168.1.0/24 dev wlan0 proto kernel scope link src 192.168.1.95 metric 202 /usr/sbin/ip route add table ISP2 default via 192.168.1.1 dev wlan0 /usr/sbin/ip rule add fwmark 102 table ISP2 /usr/sbin/iptables -t mangle -F /usr/sbin/iptables -t mangle -X /usr/sbin/iptables -t mangle -N MARK-gw1 /usr/sbin/iptables -t mangle -A MARK-gw1 -m comment --comment 'send via 192.168.178.1' -j MARK --set-mark 101 /usr/sbin/iptables -t mangle -A MARK-gw1 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw1 -j RETURN /usr/sbin/iptables -t mangle -N MARK-gw2 /usr/sbin/iptables -t mangle -A MARK-gw2 -m comment --comment 'send via 192.168.1.1' -j MARK --set-mark 102 /usr/sbin/iptables -t mangle -A MARK-gw2 -j CONNMARK --save-mark /usr/sbin/iptables -t mangle -A MARK-gw2 -j RETURN /usr/sbin/iptables -t mangle -A PREROUTING -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment "this stream is already marked; escape early" -m mark ! --mark 0 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i eth0 -m conntrack --ctstate NEW -j MARK-gw1 /usr/sbin/iptables -t mangle -A PREROUTING -m comment --comment 'prevent asynchronous routing' -i wlan0 -m conntrack --ctstate NEW -j MARK-gw2 /usr/sbin/iptables -t mangle -N DEF_POL /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p tcp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'default balancing' -p udp -m conntrack --ctstate ESTABLISHED,RELATED -j CONNMARK --restore-mark /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 tcp' -p tcp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j MARK-gw1 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw1 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 0 -j ACCEPT /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j MARK-gw2 /usr/sbin/iptables -t mangle -A DEF_POL -m comment --comment 'balance gw2 udp' -p udp -m conntrack --ctstate NEW -m statistic --mode nth --every 2 --packet 1 -j ACCEPT /usr/sbin/iptables -t mangle -A PREROUTING -j DEF_POL /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound eth0' -o eth0 -s 192.168.0.0/16 -m mark --mark 101 -j SNAT --to-source 192.168.178.95 /usr/sbin/iptables -t nat -A POSTROUTING -m comment --comment 'snat outbound wlan0' -o wlan0 -s 192.168.0.0/16 -m mark --mark 102 -j SNAT --to-source 192.168.1.95 /usr/sbin/ip route flush cache (this script was made by fukawi2, I don't know how to use iptables) but I have no Internet connection... output of iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 1254K packets, 1519M bytes) pkts bytes target prot opt in out source destination 1278K 1535M CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK restore 21532 15M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 /* this stream is already marked; escape early */ mark match ! 0x0 582 72579 MARK-gw1 all -- eth0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 2376 696K MARK-gw2 all -- wlan0 * 0.0.0.0/0 0.0.0.0/0 /* prevent asynchronous routing */ ctstate NEW 1257K 1520M DEF_POL all -- * * 0.0.0.0/0 0.0.0.0/0 Chain INPUT (policy ACCEPT 1276K packets, 1535M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 870K packets, 97M bytes) pkts bytes target prot opt in out source destination Chain DEF_POL (1 references) pkts bytes target prot opt in out source destination 1236K 1517M CONNMARK tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 15163 2041K CONNMARK udp -- * * 0.0.0.0/0 0.0.0.0/0 /* default balancing */ ctstate RELATED,ESTABLISHED CONNMARK restore 555 33176 MARK-gw1 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 555 33176 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 tcp */ ctstate NEW statistic mode nth every 2 277 16516 MARK-gw2 tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 277 16516 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 tcp */ ctstate NEW statistic mode nth every 2 packet 1 1442 384K MARK-gw1 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 1442 384K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw1 udp */ ctstate NEW statistic mode nth every 2 720 189K MARK-gw2 udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 720 189K ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 /* balance gw2 udp */ ctstate NEW statistic mode nth every 2 packet 1 Chain MARK-gw1 (3 references) pkts bytes target prot opt in out source destination 2579 490K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.178.1 */ MARK set 0x65 2579 490K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 2579 490K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0 Chain MARK-gw2 (3 references) pkts bytes target prot opt in out source destination 3373 901K MARK all -- * * 0.0.0.0/0 0.0.0.0/0 /* send via 192.168.1.1 */ MARK set 0x66 3373 901K CONNMARK all -- * * 0.0.0.0/0 0.0.0.0/0 CONNMARK save 3373 901K RETURN all -- * * 0.0.0.0/0 0.0.0.0/0

  Read the article

• Unable to connect to Linux (Virtual OS-vmware) through Putty on Windows

  - by RBA

  Hi, I want to access my Linux box (Virtual OS) through Putty on Windows using Run command: putty -ssh -P 22 192.168.171.130,,, but it is returning an error message, not able to connect. But few days back I was able to connect it today. But not now. Why?? Windows IP Configuration Host Name . . . . . . . . . . . . : rba7791fd466 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter VMware Network Adapter VMnet1: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1 Physical Address. . . . . . . . . : 00-50-56-C0-00-01 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.234.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1395 WLAN Mini-Card Physical Address. . . . . . . . . : 00-24-2B-60-A0-88 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.0.0.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 10.0.0.1 DHCP Server . . . . . . . . . . . : 10.0.0.1 DNS Servers . . . . . . . . . . . : 10.0.0.1 Lease Obtained. . . . . . . . . . : Friday, August 28, 2009 4:11:09 AM Lease Expires . . . . . . . . . . : Saturday, August 29, 2009 4:11:09 AM Ubuntu Configuration eth0 inet addr:192.168.171.130

  Read the article

• Network throughput issue (ARP-related)

  - by Joel Coel

  The small college where I work is having some very strange network issues. I'm looking for any advice or ideas here. We were fine over the summer, but the trouble began few days after students returned to campus in force for the fall term. Symptoms The main symptom is that internet access will work, but it's very slow... often to the point of timeouts. As an example, a typical result from Speedtest.net will return .4Mbps download, but allow 3 to 8 Mbps upload speed. Lesser symptoms may include severely limited performance transferring data to and from our file server, or even in some cases the inability to log in to the computer (cannot reach the domain controller). The issue crosses multiple vlans, and has effected devices on nearly every vlan we operate. The issue does not impact all machines on the network. An unaffected machine will typically see at least 11Mbps download from speedtest.net, and perhaps much more depending on larger campus traffic patterns at the time. There is one variation on the larger issue. We have one vlan where users were unable to log into nearly all of the machines at all. IT staff would log in using a local administrator account (or in some cases cached credentials), and from there a release/renew or pinging the gateway would allow the machine to work... for a while. Complicating this issue is that this vlan covers our computer labs, which use software called Deep Freeze to completely reset the hard drives after a reboot. It could just the same issue manifesting differently because of stale data on machines that have not permanently altered low-level info for weeks. We were able to solve this, however, by creating a new vlan and moving the labs over to the new vlan wholesale. Instigations Eventually we noticed that the effected machines all had recent dhcp leases. We can predict when a machine will become "slow" by watching when a dhcp lease comes up for renewal. We played with setting the lease time very short for a test vlan, but all that did was remove our ability to predict when the machine would become slow. Machines with static IPs have pretty much always worked normally. Manually releasing/renewing an address will never cause a machine to become slow. In fact, in some cases this process has fixed a machine in that state. Most of the time, though, it doesn't help. We also noticed that mobile machines like laptops are likely to become slow when they cross to new vlans. Wireless on campus is divided up into "zones", where each zone maps to a small set of buildings. Moving to a new building can place you in a zone, thereby causing you to get a new address. A machine resuming from sleep mode is also very likely to be slow. Mitigations Sometimes, but not always, clearing the arp cache on an effected machine will allow it to work normally again. As already mentioned, releasing/renewing a local machine's IP address can fix that machine, but it's not guaranteed. Pinging the default gateway can also sometimes help with a slow machine. What seems to help most to mitigate the issue is clearing the arp cache on our core layer-3 switch. This switch is used for our dhcp system as the default gateway on all vlans, and it handles inter-vlan routing. The model is a 3Com 4900SX. To try to mitigate the issue, we have the cache timeout set on the switch all the way down to the lowest possible time, but it hasn't helped. I also put together a script that runs every few minutes to automatically connect to the switch and reset the cache. Unfortunately, this does not always work, and can even cause some machines to end up in the slow state for a short time (though these seem to correct themselves after a few minutes). We currently have a scheduled job that runs every 10 minutes to force the core switch to clear it's ARP cache, but this is far from perfect or desirable. Reproduction We now have a test machine that we can force into the slow state at will. It is connected to a switch with ports set up for each of our vlans. We make the machine slow by connecting to different vlans, and after a new connection or two it will be slow. It's also worth noting in this section that this has happened before at the start of prior terms, but in the past the problem has gone away on it's own after a few days. It solved itself before we had a chance to do much diagnostic work... hence why we've allowed it to drag so long into the term this time 'round; the expectation was this would be a short-lived situation. Other Factors It's worth mentioning that we have had about half a dozen switches just outright fail over the last year. These are mainly 2003/2004-era 3Coms (mostly 4200's) that were all put in at about the same time. They should still be covered under warranty, buy HP has made getting service somewhat difficult. Mostly in power supplies that have failed, but in a couple cases we have used a power supply from a switch with a failed mainboard to bring a switch with a failed power supply back to life. We do have UPS devices on all but three of four switches now, but that was not the case when I started two and a half years ago. Severe budget constraints (we were on the Dept. of Ed's financially challenged institutions list a couple years back) have forced me to look to the likes of Netgear and TrendNet for replacements, but so far these low-end models seem to be holding their own. It's also worth mentioning that the big change on our network this summer was migrating from a single cross-campus wireless SSID to the zoned approach mentioned earlier. I don't think this is the source of the issue, as like I've said: we've seen this before. However, it's possible this is exacerbating the issue, and may be much of the reason it's been so hard to isolate. Diagnosis At first it seemed clear to us, given the timing and persistent nature of the problem, that the source of the issue was an infected (or malicious) student machine doing ARP cache poisoning. However, repeated attempts to isolate the source have failed. Those attempts include numerous wireshark packet traces, and even taking entire buildings offline for brief periods. We have not been able even to find a smoking gun bad ARP entry. My current best guess is an overloaded or failing core switch, but I'm not sure on how to test for this, and the cost of replacing it blindly is steep. Again, any ideas appreciated.

  Read the article

• Windows using the DNS suffix search list on all lookups, even valid FQDNs. How to stop this?

  - by RealityGone

  When doing DNS lookups (specifically using nslookup, for some reason most things are not effected) Windows XP Pro SP3 is using the DNS suffix search list for every single one. Even for fully qualified domain names. For example I lookup "www.microsoft.com" but windows actually asks for "www.microsoft.com.eondream.com" (eondream.com is my primary domain). Now I can fix the issue by removing the Primary DNS suffix, but it seems to me that the DNS suffix search list should be for short, invalid names (where dots=0 or something). I'm sure I have a misconfiguration somewhere in windows but I don't know where. I've changed every option I can think of or find. Below is the output of ipconfig /all and nslookup (with debug & db2 enabled). This is using a static IP & (internal) DNS server. C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : frayedlogic Primary Dns Suffix . . . . . . . : eondream.com Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : eondream.com Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1390 WLAN Mini-Card Physical Address. . . . . . . . . : 00-1B-FC-29-EB-6B Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.13.32 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.13.13 DNS Servers . . . . . . . . . . . : 192.168.19.19 C:\nslookup Default Server: shardik.eondream.com Address: 192.168.19.19 set debug set db2 www.microsoft.com Server: shardik.eondream.com Address: 192.168.19.19 ------------ Got answer: HEADER: opcode = QUERY, id = 2, rcode = NOERROR header flags: response, want recursion, recursion avail. questions = 1, answers = 1, authority records = 0, additional = 0 QUESTIONS: www.microsoft.com.eondream.com, type = A, class = IN ANSWERS: - www.microsoft.com.eondream.com internet address = 208.69.36.132 ttl = 0 (0 secs) ------------ Non-authoritative answer: Name: www.microsoft.com.eondream.com Address: 208.69.36.132 (Note: it resolves to that IP because I use the opendns service and that is their suggestion page or whatever you want to call it) If I am reading the nslookup output correctly then it is not a problem with my DNS server because windows is actually asking for the incorrect domain.

  Read the article

• Enhance GIMP’s Image Editing Power with Gimp Paint Studio

  - by Asian Angel

  Does your GIMP installation need a little super-charging? Using Gimp Paint Studio you can add a wonderful set of brushes, tools, and more to GIMP and take your work up to the next level. For our example we chose to install the beta version of Gimp Paint Studio on Ubuntu 10.10. Once you download the .zip file and unzip it, all that you need to do is manually transfer the contents shown here to the appropriate GIMP folders on your system. You can see the location of the destination folders here on our system… Note: Make certain to make a back-up copy of the “sessionrc and toolrc files” before you transfer Gimp Paint Studio into your installation (in case you would like to or need to revert back to the originals later). When you finish transferring the files start GIMP up and get ready to have fun. And if your experience is like ours then you should see a noticeable difference in window size and arrangement from the default settings. Here are some samples of the exceptional artwork done by Ramon Miranda and Mozart Couto using Gimp Paint Studio. Really impressive! Artwork by Ramon Miranda & Mozart Couto. Watch the introduction video and see Gimp Paint Studio in action. Download Gimp Paint Studio for Linux, Windows, and Mac [Gimp Paint Studio Homepage] *Keep in mind that there are stable and beta releases available, so choose the version that you are most comfortable with using. View the Installation Guides for Gimp Paint Studio *Page contains wonderful “video and written” versions for adding/installing Gimp Paint Studio to your system. Gimp Paint Studio Video Tutorials Library Visit the Gimp Paint Studio Gallery Latest Features How-To Geek ETC Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) Enhance GIMP’s Image Editing Power with Gimp Paint Studio Reclaim Vertical UI Space by Moving Your Tabs to the Side in Firefox Wind and Water: Puzzle Battles – An Awesome Game for Linux and Windows How Star Wars Changed the World [Infographic] Tabs Visual Manager Adds Thumbnailed Tab Switching to Chrome Daisies and Rye Swaying in the Summer Wind Wallpaper

  Read the article

• Save Web Articles to Read Later with Instapaper

  - by Mysticgeek

  Have you ever come across a bunch of great articles that you want to read online, but just don’t have the time? Today we take a look at an online service that allows you to read your articles later, either online, or on an iPhone, or eReader. Instapaper Instapaper is an awesome tool that allows you to save web pages so you can read them at a later time. Not only does it save an online article to read later, but also gives you several choices for where you want to read it. Sign up for a free account, and drag the “Read Later” bookmarklet to the bookmarks bar in your browser. To save a page you’ll need to be logged into your account. When you’re at a page that you can’t read right away, just click on the Read Later button in the bookmarks bar. After clicking the Read Later button, a small message is displayed indicating that the page has been saved to the Instapaper site. Save as many pages as you want, and when you’re ready to read them, go to the Instapaper site and you’ll see a list of the articles you saved. You can click on the link to go directly to the saved oage, read it as text (leaving out a bunch of images), or archive the article for later. One of the really appealing beta features is you can save the article in .mobi format for a Kindle, or ePub format for other eReaders such a the Sony Reader. Another neat feature is the “Instapaper Text” bookmarklet that lets you view an article on a graphics heavy page with only text, but doesn’t save it to your account. Before After There are also other cool features such as iPhone Apps, Kindle automatic wireless delivery, send items to Google Reader, and more. If you wish you could collect all of the neat articles you run across each day for reading later via multiple formats, Instapaper is a great tool for the job. Check Out Instapaper Similar Articles Productive Geek Tips Save Pages for Later With Reading List Extension for FirefoxGreat Geek SitesAbout the GeekHow-To Geek Changes in ProgressMake Outlook 2007 Mark Items as Read When Viewed in Reading Pane TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data

  Read the article

• SQLAuthority News – Monthly Roundup of Best SQL Posts

  - by pinaldave

  After receiving lots of requests from different readers for long time I have decided to write first monthly round up. If all of you like it I will continue writing the same every month. In fact, I really like the idea as I was able to go back and read all of my posts written in this month. This month was started with answering one of the most common question asked me to about What is Adventureworks? Many of you know the answer but to the surprise more number of the reader did not know the answer. There were few extra blog post which were in the same line as following. SQL SERVER – The Difference between Dual Core vs. Core 2 Duo SQLAuthority News – Wireless Router Security and Attached Devices – Complex Password SQL SERVER – DATE and TIME in SQL Server 2008 DMVs are also one of the most handy tools available in SQL Server, I have written following blog post where I have used DMV in scripts. SQL SERVER – Get Latest SQL Query for Sessions – DMV SQL SERVER – Find Most Expensive Queries Using DMV SQL SERVER – List All the DMV and DMF on Server I was able to write two follow-up of my earlier series where I was finding the size of the indexes using different SQL Scripts. And in fact one of the article Powershell is used as well. This was my very first attempt to use Powershell. SQL SERVER – Size of Index Table for Each Index – Solution 2 SQL SERVER – Size of Index Table for Each Index – Solution 3 – Powershell SQL SERVER – Four Posts on Removing the Bookmark Lookup – Key Lookup Without realizing I wrote series of the blog post on disabled index here is its complete list. I plan to write one more follow-up list on the same. SQL SERVER – Disable Clustered Index and Data Insert SQL SERVER – Understanding ALTER INDEX ALL REBUILD with Disabled Clustered Index SQL SERVER – Disabled Index and Update Statistics Two special post which I found very interesting to write are as following. SQL SERVER – SHRINKFILE and TRUNCATE Log File in SQL Server 2008 SQL SERVER – Simple Example of Snapshot Isolation – Reduce the Blocking Transactions In personal adventures, I won the Community Impact Award for Last Year from Microsoft. Please leave your comment about how can I improve this round up or what more details I should include in the same. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >