Search Results

Search found 7126 results on 286 pages for 'wireless router'.

Page 153/286 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

  • Can not access Internet (DNS names do not resolve) after update today

    - by Aras
    I have been using Precise for a few weeks now for work with no problem. Today, I am not able to access any website using either wired or wireless connections. I installed the updates today which included nautilus, xserver, and a new kernel (3.2.0-24). After restarting I no longer was able to browse the Internet using firefox or chrome. Trying to ping google in terminal gives ping: unknown host google.ca I have tried: Connecting to wireless or wired networks (both working on other machines) Restart the machine and boot with previous Kernel Manually configure opendns on my wired connection Restart the network and the laptop and the wireless card Without any success so far. I am not sure where to go next. Please let me know the cause of the issue or help me troubleshoot it. Note that the laptop does receive an ip address, and it can ping ip address of google.ca (74.125.127.94) but not the domain name, or any domain name for that matter. This system was upgraded from 11.10 to 12.04 more two weeks ago.

    Read the article

  • Suddely internet is not accessible

    - by user189708
    I am going crazy here. One day everything was working fine. I turned pc off and went to sleep. Next day turn pc on and cannot access internet (from any browser). The situation is: I cannot open any webpage from browser (tried Firefox and Epiphany) and cannot receive emails in thunderbird. BUT if I run firefox from console as sudo, I can use it as usual. I can access Skype and pretty much any other network stuff (like installing software with apt-get etc.), also if I use Astrill VPN software I can access webpages even running without sudo. I haven't install any software or anything like that for several days = I have not a clue what could cause this. Just by the way, other Win PC in our home has no issue. Here is what I have tried to fix this: I have tried to restart my pc, router, modem - multiple times I have tried to change permissions to my firefox profile I have tried to completely re-install firefox and start with blank profile, thus no addons I have tried to change /etc/resolv.conf to an IP of my router (it was 127.0.1.1) I have tried to change my hostname (from tomino-NB to tominoNB) I think I might try even more stuff. None of it works. Can someone please try to help me. Thank you UPDATE 1: I have tried this: Removing resolv.conf - Didn't help Also "ping" and "dig" commands cannot resolve host UPDATE 2: I have tried to edit nameservers in resolv.conf but still no effect. I can ping router as well as I can ping outside IP. So definitely just some DNS issue. Is it possible that something is rewriting path to resolv.conf and using different file? UPDATE 3: I have just restarted PC and everything works now... resolv.conf went back to nameserver 127.0.1.1 . I have no clue what happened that it works again...

    Read the article

  • What is the proper way to install the 3.4 kernel?

    - by Marcelo Ruiz
    Kernel 3.2 has an annoying error for my wireless card (rtl8192se-b) that makes the connection drop and/or prevents the card to make a connection to the wireless router. Dealing with it was very frustrating until I found out the bug was corrected in 3.4. I downloaded: linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-headers-3.4.0-030400_3.4.0-030400.201205210521_all.deb linux-image-3.4.0-030400-generic_3.4.0-030400.201205210521_amd64.deb and installed with: sudo dpkg -i * Now the wireless works fine, but I have two problems that cannot solve. The first one is minor: plymouth would not start at all. But if I boot with the 3.2 kernel it works fine. The second one is serious: sometimes the computer won't shut down or reboot. The X server terminates but the computer shows part of my grub background and will stay there forever using 100% of the CPU. I have a Toshiba Qosmio with an Core i7 and nvidia graphic card (using nvidia-current). During one shutdown, I briefly read a message that said that the virtualbox module couldn't be unloaded from the kernel. I tried to solve this by removing and purging virtualbox and installing it back. I don't see the message anymore, but sometimes the computer won't shutdown nor reboot. Am I missing something to properly configure the new kernels? Thanks!

    Read the article

  • Going on 15 months for me...

    - by Ratman21
    About 5 face to face interviews, 4 telephone ones and except for the two weeks Census Job. But, after 15 months looking for work, I am still with out a JOB. What is wrong here or with me? Let’s see, hard worker (check), self motivated to do well on a Job (Check), Certified CompTIA A+, Security+  and Network+ Technician (Check), 20 + years experience in “IT” (CHECK), in good health, in 20 years of work only 15 days off due to health issues (Check), 18 years experience as technical Help Desk support (Check), can still work better than younger personal (Check), Strong trouble shooting skills for software, computer hard ware and circuit issues (Check) and Multiple software languages (Hey I have done some programming) Check. Hmm I don’t see any problem with me (of course I could have missed something, please let me know if you see what I am missing).    Now as to what have I been up to since I last blogged. The same things of course, Job hunting, job hunting and study.   I have set up sim of my home LAN and will be adding a wireless print server to the sim and in real life, soon.  I was able to pull up and copy the examples of Cisco router commands that I had on my old lap top, to my newer PC. Every time I used a new command while working the NOC on my last job.   I would cut and past a copy of the command on the router (and what it did) I was working on.  Along with notes on the problem and commands use for same router. I used these to make documentation for on how to handle these types of issues, for the other Operation Techs. My old notes are helping me in studying for the CCENT test.    As to Love Dare, I think it will take more like 40 weeks, than the 40 days of the book. Yes I am making progress, slow but, it is progress. I will have more on that in my next blog.

    Read the article

  • How to connect two ubuntu computers with ethernet cable

    - by Lukasz Zaroda
    I'm trying to connect with ethernet cable two computers - desktop and laptop. What I want to do is transfer a lot of data from one to another. The problem is that I'm doing everything from: How to network two Ubuntu computers using ethernet (without a router)? But after that, ping always gives me "Destination host unreachable". I was searching a while but couldn't figure out what is a reason it doesn't work, maybe it's something about my devices or maybe someone will have another idea. Ethernet cable I got with my router. There is a text printed on it: Aurit Data Cable Cat.5 UTP 26AWG 4PAIR AWM PUC 75°C EIA/TIA 568B It's connecting now my desktop to router, so I can send this question. My desktop: System: Ubuntu 12.04 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03) "ethtool -i eth0" output: driver: r8169 version: 2.3LK-NAPI firmware-version: rtl_nic/rtl8168d-1.fw bus-info: 0000:01:00.0 supports-statistics: yes supports-test: no supports-eeprom-access: no supports-register-dump: yes My laptop: System: Ubuntu 14.04 Ethernet controller: Qualcomm Atheros AR8162 Fast Ethernet (rev 08) "ethtool -i eth0" output: driver: alx version: firmware-version: bus-info: 0000:01:00.0 supports-statistics: no supports-test: no supports-eeprom-access: no supports-register-dump: no supports-priv-flags: no My iptables are accepting everything. Any ideas why I cannot reach other computer?

    Read the article

  • More information about worldwide nodes how to get?

    - by Aubergine
    The context: Six hosts across worldwide were traced over week from UK. Ten thousands of lines to be parsed and analysed. And then I try to find any clue of geographical information and path - from where it jumps where. Then after Austria or Germany(each time different) I have mysterious 62.208.72.6 which in GEO LOC gives me Falklands Islands (which is where my target host is by the way, but before target host I still have 5 other nodes) Then I do whois for this 62.208.72.6 route: 62.208.0.0/16 descr: DE-ECRC-62-208-0-0 origin: AS1273 mnt-by: CW-EUROPE-GSOC source: RIPE # Filtered Why it says Europe now? How to understand this enigma code? I want to confirm more or less whether this is in europe or in falkland islands? But it can't be in FK yet as after next two hosts I get New York? Could you also tell me what does this CW-EUROPE-GSOC abbreviation means. (To preserve your sanity better not google, unless you already know it :-D) And the actual whois for the destination/target host, which completely destroys my head: route: 195.248.193.0/24 descr: HORIZON descr: Cable and Wireless Falkland Islands descr: Via Cable and Wireless Communications UK origin: AS5551 mnt-by: AS5551-MNT source: RIPE # Filtered How is it Via Cable and Wireless Communications UK if two nodes before I was in New York? Thank you guys,

    Read the article

  • Mouse wheel speed, a permanent solution?

    - by Logan
    I would like to address an issue that has been around for a while now. The wireless mouse's wheel speed is abnormally fast on Ubuntu (as well as Mac Osx, as I have read) and the way to fix this temporarily is to unplug and plug the wireless adapter. A solution for this have been asked for in various forum topics on Ubuntu forums and also askubuntu. However the best solution for this is to re-plug the wireless adapter for the mouse. This fixes the mouse wheel speed until the next reboot. My question is, what can be done to make this permanent? Can a shell script be written, or firstly what can be causing this? If you could give me some ideas on why this problem is occurring I would happily write a shell script for it... (I am thinking if this is fixed by a simple re-plug of the adapter, maybe a shell script to disable device and re-enable it or something like that... could do the trick) I appreciate any discussions and ideas on the subjects. Here are some already discussed topics on the same subject that I've researched: Mouse wheel jumpy on scrolling Mouse wheel scrolling too fast There's a lot more than that on the net, all of them ends with re-plug solution.

    Read the article

  • Use two networks at the same time?

    - by Christopher
    I want to use Ubuntu 10.10 Server in a classroom, a computer lab whose bandwidth is provided by a local cable ISP. That's no problem, though the school network has an IP printer that I want to use. I cannot reach the printer through the cable Internet. But, I have two network cards. How is it possible to use both networks at once? eth0 (static 192.168.1.254) is plugged into a four-port router, 192.168.1.1. On the public side of the four-port router is Internet provided by the cable company. I also have the classroom workstations plugged into a switch. The switch is plugged into the four-port router. The whole classroom is wired into the cable Internet. The other NIC, eth1, could it be plugged into an Ethernet jack in the wall? It uses the school network, and I might receive by DHCP an IP address like 10.140.10.100, with the printer on maybe 10.120.50.10. I was thinking about installing the printer on the server so that it could be shared with the workstations. But how does this work? Can I just plug eth1 into the school network and access both LANs? Thanks for any insight

    Read the article

  • Maximum 5 minute battery life with Ubuntu 11.10 on HP laptop

    - by JamesG
    I apologise if this question is too similar to the numerous others already asked, but it seems that my difference in battery life is significantly more noticeable than others that have been reported. I recently installed Ubuntu 11.10 on my HP Pavilion dv6 laptop (which I purchased brand new just under one year ago). When running Windows 7 on this laptop, I have been able to get up to two and a half to three hours of battery life with wireless disabled and when running only Microsoft Word. However, when running Ubuntu, I am unable to use the laptop if it is not plugged in. Upon unplugging the fully-charged machine from the power cord, if I have wireless enabled, I immediately receive a notification that the battery levels are critically low and that shutdown is imminent. Even if I replace the power plug, the laptop shuts down within thirty seconds. If I disable wireless capability, I am able to run the laptop for an absolute maximum of five minutes on battery powers before receiving the same message. I have tried running with Jupiter on Power Saver mode, but to no noticeable effect. Ignoring the fact that I can't use my laptop without being attached to a power source, I really do enjoy using Ubuntu, and hence would greatly appreciate any help that can be offered.

    Read the article

  • What You Said: How Do You Browse Securely Away From Home?

    - by Jason Fitzpatrick
    Responses to this week’s Ask the Reader question show that just because you’re away from home doesn’t mean you have to give up the security and privacy that your home network provides. Earlier this week we asked you to share you browsing away from home security tips and tricks and obliged. JC offered one of the more entertaining tales of away-from-home browsing: Recently a bunch of us stayed at a high end resort down in Mexico. Internet was offered as a pay per device service at about $80/week/device. Considering we had about 12 wifi devices there among us(a few geeks), I decided to plan ahead. I setup a WRT54G as a WiFi client with a vpn back to my house and NAT. Setup a second one as a basic wireless access point with password and plugged it into the first. Onsite we setup the devices and connected to the wireless with one paid account(tied to the MAC address). Everyone connected to the other device for wireless access and it was all tunnelled through my home network with encryption. HTG Explains: Learn How Websites Are Tracking You Online Here’s How to Download Windows 8 Release Preview Right Now HTG Explains: Why Linux Doesn’t Need Defragmenting

    Read the article

  • Ubuntu 12.04 + Bluetooth problems with maintaining connection

    - by ifndefx
    I have an Apple Wireless Mouse, Apple Wireless Keyboard, Apple Wireless Trackpad, and a pair of headphones. All of these connect to the computer via a Bluetooth dongle. After several hours I've managed to get the devices paired (all except the headphones) with the computer. However, I'm facing a problem where a connection can't be maintained even with one device. I first started with the gnome bluetooth applet, this couldn't even pick up devices, so I installed blueman, and this at least detected the devices but it couldn't keep the connection going. Then i read somewhere to get hidd installed and use the command line using the mac address of the device (which I got from blueman) and this worked really well, the connection was stable, but there's still a couple of issues that I need help with: If I am to use hidd I need to execute this via terminal, which means for the keyboard and the mouse I need to have two of each. This doesn't make sense. I need the bluetooth daemon to have started with the devices picked up a lot earlier, and especially at grub bootloader. The mouse and the trackpad both work if i use hidd, however, I cannot get the right mouse to work nor the scroll wheel to work. The headphones don't work period, they don't work with any of the bluetooth applets, and with hidd either. When I use blueman aplet, it attempts to pair and states 'Authentication Rejected". The headphone is Phillips SHB9100. If someone can help me with this, I would be grateful.

    Read the article

  • Ubuntu 11.04 64bits Keeps Randomly Freezing

    - by user971602
    This has been a real headache for me since the number of freezes has increase from twice a week to about 1 or twice a day. The system just halts and nothing can be done but hitting the restart button. At the beginning I thought it was related to Flash since I was getting random freezes when playing full screen flash videos online. I also thought it could be the wireless pci card. But the system has freezed using browsing around GNOME. The truth is, the freezes are really random and strange. I checked this thread Ubuntu keeps randomly freezing and try to ssh my computer using another one, but I could not ssh since it was really totally frozen. NumLock or CapsLock wasn't responding or blinking. Since I could not ssh I, also ignored this article https://wiki.ubuntu.com/X/Troubleshooting/Freeze According to my wife, the system has also halted under Win7 Pro 64bit but with less frequency. Here is my system configuration Intel Core i7 2600k ASRock Z68 Extreme3 gen3 Motherboard Crucial M4 128GB CT128M4SSD2 SSD WD Caviar Green WD10EADS 1TB SATA II G.SKILL Ripjaws X Series 8GB (2 x 4GB) DDR2 OCZ ModXStream 600W Power Supply Rosewill RNX-N300X PCI Wireless Adapter No external Graphics Card I remove the Wireless card and used Ethernet to see if the problem was the that, but I got a freeze after doing that. I also ran memtest86 and everything was ok. The only other thing I might suspect of is the SSD. I will try to clone the SSD to a HDD to see if that solve the problem. At this point I am stuck with the freezes. Do anyone have a clue of why this is happening and how can i solve this?

    Read the article

  • Can't get utouch to show available wifi networks

    - by kellrobinson
    I have ubuntu touch installed on a 2014 Nexus 7. Swiping down from the wireless symbol reveals a "Network" menu with the choices Flight Mode, Wifi Settings, and Cellular Settings. Wifi Settings leads to another menu: Previous Networks, and Other Networks. Previous Networks shows a list of networks used in the past; Other Networks opens an empty box for typing in the name of a network. I don't see any way to show a list of available networks detected by the device. On rare occasions, swiping down the wireless symbol actually does bring up a list of detected networks. But most of the time ubuntu touch exhibits the behavior described above, with no apparent way to bring up the list of available wireless networks. I would like to see a list of the availble networks, if there is a way to do so. Edit: The wifi menu works properly now. Just needed a couple of reboots, it seems. I have other problems, though. If these other problems persist I will make a post specific to them. This device is a 2013 Nexus 7 4G. Not sure how to find the ubuntu version. Can't navigate the settings menu right now because it got stuck and there's no way to go back, except to reboot(!) I'll open multirom manager or boot into recovery and look for the information there.

    Read the article

  • 2012 EC Election Results

    - by heathervc
    The 2012 Fall Executive Committee Election process is now complete. The ballot closed at midnight pacific time on Monday, 29 October.  Congratulations to Cinterion Wireless Modules GmbH, Credit Suisse, Fujitsu Limited, Hewlett-Packard (all four candidates were ratified),  and CloudBees and London Java Community (two elected candidates) as the new and re-elected merged EC Members. For more information regarding the merged EC, please refer to JSR 355 and the JCP 2.9 Process Document. Ratified Seats: Cinterion Wireless Modules GmbH, Credit Suisse, Fujitsu Limited and Hewlett-Packard Open Election Seats: CloudBees and London Java Community Newly elected EC Members take their seats on Tuesday, 13 November 2012. Detailed Election Results:Number of Eligible Voters: 1131 Percent of Eligible Members Casting Votes: 23.70% Ratified Seats: Candidate Yes Votes (%) No Votes (%) Abstentions Cinterion Wireless Modules GmbH 156 (76) 48 (24) 64 Credit Suisse 205 (85) 35 (15) 28 Fujitsu Limited 195 (85) 35 (15) 38 Hewlett-Packard 182 (81) 44 (19) 42 Open Election Seats: The top two candidates have been elected. Candidate Votes (%) Cisco Systems 37 (7) CloudBees 101 (20) Giuseppe Dell'Abate 6 (1) Liferay, Inc. 35 (7) London Java Community 164 (33) MoroccoJUG 46 (9) North Sixty-One Ltd 26 (5) Software AG 19 (4) ZeroTurnaround 64 (13) None of the above 5 (1) For more information about the candidates who ran for the 2012 Executive Committee Election, please visit the 2012 Executive Committee Elections Nominees page.

    Read the article

  • How can I change mouse keymapping

    - by zuberuber
    I have Razer DeathAdder(left handed edition) and A4Tech wireless mouse. My problem is I don't know how to change wireless mouse keymapping(swaping left/right click). Can somebody guide me how to do such thing? List of my devices: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Logitech Unifying Device. Wireless PID:4004 id=8 [slave pointer (2)] ? ? Razer Razer DeathAdder id=11 [slave pointer (2)] ? ? A4TECH USB Device id=12 [slave pointer (2)] ? ? A4TECH USB Device id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Logitech USB Keyboard id=9 [slave keyboard (3)] ? Logitech USB Keyboard id=10 [slave keyboard (3)] This is my Razer xinput: Device 'Razer Razer DeathAdder': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 5.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 5426, 22 Device Node (241): "/dev/input/event4" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0 And this is my wireless mouse xinput: Device 'A4TECH USB Device': Device Enabled (121): 1 Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000 Device Accel Profile (246): 0 Device Accel Constant Deceleration (247): 1.000000 Device Accel Adaptive Deceleration (248): 1.000000 Device Accel Velocity Scaling (249): 10.000000 Device Product ID (240): 2522, 1359 Device Node (241): "/dev/input/event16" Evdev Axis Inversion (250): 0, 0 Evdev Axes Swap (252): 0 Axis Labels (253): "Rel X" (131), "Rel Y" (132), "Rel Horiz Wheel" (245), "Rel Vert Wheel" (274) Button Labels (254): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (269), "Button Extra" (270), "Button Forward" (271), "Button Back" (272), "Button Task" (273), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243), "Button Unknown" (243) Evdev Middle Button Emulation (255): 0 Evdev Middle Button Timeout (256): 50 Evdev Third Button Emulation (257): 0 Evdev Third Button Emulation Timeout (258): 1000 Evdev Third Button Emulation Button (259): 3 Evdev Third Button Emulation Threshold (260): 20 Evdev Wheel Emulation (261): 0 Evdev Wheel Emulation Axes (262): 0, 0, 4, 5 Evdev Wheel Emulation Inertia (263): 10 Evdev Wheel Emulation Timeout (264): 200 Evdev Wheel Emulation Button (265): 4 Evdev Drag Lock Buttons (266): 0

    Read the article

  • BlueTooth not working on my HP Probook 4720s

    - by mtrento
    the blue tooth on my ubuntu 11.10 does not work. When i try to ad a device it scans indefinitely and never find anything. Wireless is working perfeclty and with windows 7 it is detected. As i read somewhere , the bluetooth is not listed in the usb devices. Is it supported under ubuntu? here are the output of the various debug command i tested : hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: E0:2A:82:7A:8B:04 ACL MTU: 310:10 SCO MTU: 64:8 UP RUNNING PSCAN ISCAN RX bytes:1895 acl:0 sco:0 events:70 errors:0 TX bytes:1986 acl:0 sco:0 commands:64 errors:0 Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x59 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'PC543host-0' Class: 0x5a0100 Service Classes: Networking, Capturing, Object Transfer, Telephony Device Class: Computer, Uncategorized HCI Version: 2.1 (0x4) Revision: 0x149c LMP Version: 2.1 (0x4) Subversion: 0x149c Manufacturer: Cambridge Silicon Radio (10) hcitool scan hcitool scan Scanning ... lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1ac Chicony Electronics Co., Ltd Bus 002 Device 003: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse Bus 002 Device 004: ID 148f:1000 Ralink Technology, Corp. lsmod | grep -i bluetooth bluetooth 166112 23 bnep,rfcomm,btusb dmesg | grep -i bluetooth [ 18.543947] Bluetooth: Core ver 2.16 [ 18.544017] Bluetooth: HCI device and connection manager initialized [ 18.544020] Bluetooth: HCI socket layer initialized [ 18.544021] Bluetooth: L2CAP socket layer initialized [ 18.545469] Bluetooth: SCO socket layer initialized [ 18.548890] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 30.204776] Bluetooth: RFCOMM TTY layer initialized [ 30.204782] Bluetooth: RFCOMM socket layer initialized [ 30.204784] Bluetooth: RFCOMM ver 1.11 [ 30.247291] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 30.247295] Bluetooth: BNEP filters: protocol multicast lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5400 Series] 01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series] 44:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe 45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 3: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no

    Read the article

  • How to use DI and DI containers

    - by Pinetree
    I am building a small PHP mvc framework (yes, yet another one), mostly for learning purposes, and I am trying to do it the right way, so I'd like to use a DI container, but I am not asking which one to use but rather how to use one. Without going into too much detail, the mvc is divided into modules which have controllers which render views for actions. This is how a request is processed: a Main object instantiates a Request object, and a Router, and injects the Request into the Router to figure out which module was called. then it instantiates the Module object and sends the Request to that the Module creates a ModuleRouter and sends the Request to figure out the controller and action it then creates the Controller and the ViewRenderer, and injects the ViewRenderer into the Controller (so that the controller can send data to the view) the ViewRenderer needs to know which module, controller and action were called to figure out the path to the view scripts, so the Module has to figure out this and inject it to the ViewRenderer the Module then calls the action method on the controller and calls the render method on the ViewRenderer For now, I do not have any DI container set up, but what I do have are a bunch of initX() methods that create the required component if it is not already there. For instance, the Module has the initViewRenderer() method. These init methods get called right before that component is needed, not before, and if the component was already set it will not initialize it. This allows for the components to be switched, but it does not require manually setting them if they are not there. Now, I'd like to do this by implementing a DI container, but still keep the manual configuration to a bare minimum, so if the directory structure and naming convention is followed, everything should work, without even touching the config. If I use the DI container, do I then inject it into everything (the container would inject itself when creating a component), so that other components can use it? When do I register components with the DI? Can a component register other components with the DI during run-time? Do I create a 'common' config and use that? How do I then figure out on the fly which components I need and how they need to be set up? If Main uses Router which uses Request, Main then needs to use the container to get Module (or does the module need to be found and set beforehand? How?) Module uses Router but needs to figure out the settings for the ViewRenderer and the Controller on the fly, not in advance, so my DI container can't be setting those on the Module before the module figures out the controller and action... What if the controller needs some other service? Do I inject the container into every controller? If I start doing that, I might just inject it into everything... Basically I am looking for the best practices when dealing with stuff like this. I know what DI is and what DI containers do, but I am looking for guidance to using them in real life, and not some isolated examples on the net. Sorry for the lengthy post and many thanks in advance.

    Read the article

  • Starting over and new to Ubuntu

    - by 2funnyyone
    We have been having repeated problems with our interent service and using windows xp & sp3 (users and premissions) I see no need for them. I started with computers long before windows. Every since sp 3 come out in 2009 I have had nothing but problems. I have lost so many computers to virius and trojans, we just stack them up. We are with Qwest/ Century link which is using advertising servers which I think is causing the problem. All the computers are networked together which is not how I set them up. I beleive Century link is networking them through assignment of a domain for our home. This causes all the computers to crash twice. This is getting expensive. We tried buying new harddrives but reinfect with hours of connecting to internet. I also beleive the modem, router and all computers are infected. I put combofix on this one and that is the only reason we are still online with this laptop. I am afraid to install new equipment because my partner and I are on SSDI and this cost a lot. I go to school at UOP and had to run off a flash and reboot this laptop to recovery every other day or so, this pass month. New plan is: We are getting ready to install new equipment but afraid to reinfect again. Need help to install new equipment. The plan is to use current internet services from Qwest/ now Century Link. The list of New equipment in order: Century link wireless modem is ZyXEL PK5000Z with 4 direct connect Ethernet ports Next Dell Optiplex 210L ( used auction purchase ) 2 gb ram 80 g hard drive Ubuntu 11.10 operating system Next Wireless D-Link router WBR-1310 with 4 direct connect Ethernet ports OK-------- Purchased Dell OEM disk for Repair or Reinstalling Windows XP Professional Operating system (2 roommates as well) All infected computers are Dell desktops or laptops with XP Pro Also purchasing Ubuntu 12.04 for 3 computers. We like the way it runs but still learning it. Questions 1] How do we fdisk the infected computers without infecting new system. We have Dos disks, but none have floppy dish drive. We do have a new floppy disk drive and usb adapter we purchased from Amazon. 2] We are thinking Avast internet security because of the boot scan. We want all software loaded before reconnecting. We can manually load our internet provider information. We purchased StopZilla $100 for 5 computers, but not sure that is what we need. But need how to setup ports security and services we will need. Really lost at this part. So we are safe when we go back on the internet. 3] Want to connect reloaded fdisk systems to router as public connection and no sharing. Do not want to network all computers. 4] Want parental/ ownership control from Ubuntu system for internet connection (Children and friends). Do we restrict at the modem and/ or router? Any help would be a blessing. I do not want to go alone on this anymore.

    Read the article

  • ZF2: Get url parameters in controller

    - by koko
    I have experienced Zend Framework 1 and I've build some apps with that framework. Now, I'm experimenting Zend Framework 2, but I'm stuck on the url parameters. I've setup my routing like this: // Setup for router and routes 'Zend\Mvc\Router\RouteStack' => array( 'parameters' => array( 'routes' => array( 'default' => array( 'type' => 'Zend\Mvc\Router\Http\Segment', 'options' => array( 'route' => '/[:slug]', 'constraints' => array( 'slug' => '[a-zA-Z][a-zA-Z0-9_\/-]*' ), 'defaults' => array( 'controller' => 'Htmlsite\Controller\BootController', 'action' => 'index', 'slug' => 'home' ), ), ), 'home' => array( 'type' => 'Zend\Mvc\Router\Http\Literal', 'options' => array( 'route' => '/', 'defaults' => array( 'controller' => 'Htmlsite\Controller\BootController', 'action' => 'index', ), ), ), ), ), ), As you can see, I've tried to make a variable slug. How can I access this variable?

    Read the article

  • C++ classes with members referencing each other

    - by Saad Imran.
    I'm trying to write 2 classes with members that reference each other. I'm not sure if I'm doing something wrong or it's just not possible. Can anyone help me out here... Source.cpp #include "Headers.h" using namespace std; void main() { Network* network = new Network(); system("pause"); return; } Headers.h #ifndef Headers_h #define Headers_h #include <iostream> #include <vector> #include "Network.h" #include "Router.h" #endif Network.h #include "Headers.h" class Network { protected: vector<Router> Routers; }; Router.h #include "Headers.h" class Router { protected: Network* network; public: }; The errors I'm getting are: error C2143: syntax error : missing ';' before '<' error C2238: unexpected token(s) preceding ';' error C4430: missing type specifier - int assumed. I'm pretty sure I'm not missing any semicolons or stuff like that. The program works find if I take out one of the members. I tried finding similar questions and the solution was to use pointers, but that's what I'm doing and it does't seem to be working!

    Read the article

  • Zend Routes conflict

    - by meder
    I have defined 2 custom routes. One for threads/:id/:name and the other for threads/tags/:tagName however the second one conflicts with the first because if I enable both then the first breaks and treats :id literally as an action, not obeying the \d+ requirement ( I also tried using pure regex routes, see bottom ). Action "1" does not exist and was not trapped in __call() I tried re-arranging the order of the routes but if I do that then the threads/tags/:tagName doesnt correctly capture the tagName. I also tried disabling default routes but the routes still don't properly work after that. Here's my route init function: protected function _initRoutes() { $fc = Zend_Controller_Front::getInstance(); $router = $fc->getRouter(); $router->addRoute( 'threads', new Zend_Controller_Router_Route('threads/:id/:name', array( 'controller' => 'threads', 'action' => 'thread', ), array( 'id' => '\d+' ) ) ); $router->addRoute( 'threads', new Zend_Controller_Router_Route('threads/tags/:tagName', array( 'controller' => 'threads', 'action' => 'tags', ), array( 'tagName' => '[a-zA-Z]+' ) ) ); } I also tried using a pure regex route but was unsuccessful, most likely because I did it wrong: $router->addRoute( 'threads', new Zend_Controller_Router_Route_Regex( 'threads/(\d+)/([a-zA-Z]+)', array( 'controller' => 'threads', 'action' => 'thread', ), array( 1 => 'tagName', 2 => 'name' ) ) );

    Read the article

  • How to define a batching routing service in WCF

    - by mattx
    I have designed a custom silverlight wcf channel that I want to leverage to selectively batch calls from the client to the server and possibly to cache on the client and short circuit calls. So far I'm just using this channel as a transport and sending the generic WCF messages that result to the WCF router service example here http://msdn.microsoft.com/en-us/magazine/cc500646.aspx?pr=blog to prototype this on the server side. So my scenario looks like this: IFooClient-MyTransportChannel-IRouterService-IFooService-Return I now need to be able to send more than one message per call through the router and carve them up and service them on the server side. Since this is just an experiment and I'm taking baby steps I will dispatch and service all the messages right away on the server side and return the batch of results. Immediately I noticed that simply making the router interface take Message[] instead of Message doesn't work due to serialization problems. I guess this makes sense. I'm not sure soap envelopes can contain other soap envelopes etc. Is there a simple way to take a collection of WCF Message objects and send them to a single method on a service where they can be split up and forwarded as appropriate? If not I'd love suggestions on how I should approach this. I want to have minimal work to do on the router service side so the goal should be to get as close to being able to "slice and forward" as possible.

    Read the article

  • How to emulate mod_rewrite in PHP

    - by Tyler Crompton
    I have a few URLs that I want to map to certain files via PHP. Currently, I am just using mod_rewrite in Apache. However, my application is getting too large for the rewriting to be done with regular expressions. So I created a file router.php that does the rewriting. I understand to do a redirect I could just send the Location: header. However, I don't always want to do a redirect. For example, I may want /api/item/ to map to the file /herp/derp.php relative to the document root. I need to preserve the HTTP method as well. "No problem," I thought. I made my .htaccess have the following snippet. RewriteEngine On RewriteRule ^api/item/$ /cgi-bin/router.php [L] And my router.php file looks as follows: <?php $uri = parse_url($_SERVER['REQUEST_URI']); $query = isset($uri['query']) ? $uri['query'] ? array(); // some code that modifies the query require_once "{$_SERVER['DOCUMENT_ROOT']}/herp/derp.php?" . http_build_query($query); ?> However, this doesn't work, because the OS is looking for a file named derp.php?some=query. How can I simulate a rewrite rule such as RewriteRule ^api/item/$ /herp/derp/ [L] in PHP. In other words, how do I tell the server to process a different URL than requested and preserve the query and HTTP method without causing a redirect? Note: Using variables set in router.php is less than desirable and is bad structure since it's only supposed to be responsible for handling URLs. I am open to using a light-weight third party solution.

    Read the article

  • Zend Framework - How do make a hierarchy without it being a module?

    - by Josh
    Here is my specific issue. I want to make an api level which then under that you can select which method you will use. For example: test.com/api/rest test.com/api/xmlprc Currently I have api mapping to a module directory. I then setup a route to make it a rest route. test.com/api is a rest route, but I would rather have it be test.com/api/rest. This would allow me later to add others. In Bootstrap.php: $front = Zend_Controller_Front::getInstance(); $router = $front->getRouter(); $route = new Zend_Controller_Router_Route( 'api/:module/:controller/:id/*', array('module' =>'default') ); $router-addRoute('api', $route); $restRoute = new Zend_Rest_Route($front, array(), array( 'rest' )); $router-addRoute('rest', $restRoute); return $router; In application.ini: resources.frontController.moduleDirectory = APPLICATION_PATH "/modules" I know it will involve routes, but sometimes I find the Zend Framework documentation to be a little hard to follow. When I go to test.com/rest/controller/ it works how it should, but if I go to test.com/api/rest/ it tells me that my module is api and controller is rest.

    Read the article

  • Socket stops communicating

    - by user1392992
    I'm running python 2.7 code on a Raspberry Pi that receives serial data from an Arduino, processes it, and sends it to a Windows box over a wifi link. The Pi is wired to a Linksys router running in client bridge mode and that router connects over wifi to another Linksys router to which the Windows box is wired. The code in the Pi runs fine for some (apparently) random interval, and then the Pi becomes unreachable from the Windows box. I'm running PUTTY on the the Windows machine to connect to the Pi and when the fail occurs I get a message saying there's been a network error and the Pi is not reachable. Pinging the Pi from the Windows machine works fine until the error, at which time it produces "Reply from 192.168.0.129: Destination host unreachable." The client bridge router to which the Pi is connected remains reachable. I've got the networking code on the Pi wrapped in an exception handler, and when it fails it shows the following: Ethernet problem: Traceback (most recent call last): File "garage.py", line 108, in module s.connect((host, port)) File "/usr/lib/python2.7/socket.py", line 224, in meth return getattr(self._sock,name)(*args) error: [Errno 113] No route to host None The relevant python code looks like: import socket import traceback host = '192.168.0.129' port = 31415 in the setup, and after serial data has been processed: try: bline = strline.encode('utf-8') s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.connect((host, port)) s.send(bline) s.close() except: print "Ethernet problem: " print traceback.print_exc() Where strline contains the processed data. As I said, this runs fine for a few hours more or less before failing. Any ideas? EDIT: When PUTTY fails its error message is :Network Error: Software caused connection abort."

    Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >