Search Results

Search found 5245 results on 210 pages for 'confused or too stupid'.

Page 154/210 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• How to access files on a drive from an older system, mounted in a new system?

  - by David Thomas

  I've recently built a new system, after a rather large physical injury was sustained by my previous system (a precarious balance, and gravity, were not a happy mix). Surprisingly the /home drive of that system appears to have more-or-less survived the trauma. However... I decided to use a fresh drive for / (and swap) partition(s), and another fresh drive for the new /home. Now that's working, I decided to install the old /home drive (that I had assumed until now would be entirely dead and without capacity for use) into the new system to recover the files and data (so far as is possible). At this point I've run into a snag: I have no idea how to go about this (with Windows it was relatively easy, the new drive would be the latest character of the alphabet, and go from there). With 'disk utility' (System - Administration - Disk Utitlity) I've worked out which drive it is (/dev/sda) but clicking on 'mount' produces an error: 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed ...if it is mounted on / I can't see it. I'm also moderately confused by the disk (device /dev/sda) being referred to as /dev/sdb1. Any and all insights would be incredibly welcome (I've already voted for: Idea #9063: New internal hard drives default automount at Brainstorm). Edited in response to Roland's request for a screenshot of disk utility: Details (so far as I know them): 40GB disk is / and swap, 1.0 TB Samsung is /home 1.0 TB Hitachi is from the old system (and was the old /home drive). Output from sudo fdisk -l pasted below: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bef00 Device Boot Start End Blocks Id System /dev/sda1 1 121601 976760001 83 Linux Disk /dev/sdb: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00037652 Device Boot Start End Blocks Id System /dev/sdb1 * 1 4742 38084608 83 Linux /dev/sdb2 4742 4866 993281 5 Extended /dev/sdb5 4742 4866 993280 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d46 Device Boot Start End Blocks Id System /dev/sdc1 1 121602 976760832 83 Linux

  Read the article

• UppercuT v1.0 and 1.1&ndash;Linux (Mono), Multi-targeting, SemVer, Nitriq and Obfuscation, oh my!

  - by Robz / Fervent Coder

  Recently UppercuT (UC) quietly released version 1 (in August). I’m pretty happy with where we are, although I think it’s a few months later than I originally planned. I’m glad I held it back, it gave me some more time to think about some things a little more and also the opportunity to receive a patch for running builds with UC on Linux. We also released v1.1 very recently (December). UppercuT v1 Builds On Linux Perhaps the most significant changes to UC going v1 is that it now supports builds on Linux using Mono! This is thanks mostly to Svein Ackenhausen for the patches and working with me on getting it all working while not breaking the windows builds!  This means you can use mono on Windows or Linux. Notice the shell files to execute with Linux that come as part of UC now. Multi-Targeting Perhaps one of the hardest things to do that requires an automated build is multi-targeting. At v1 this is early, and possibly prone to some issues, but available.  We believe in making everything stupid simple, so it’s as simple as adding a comma to the microsoft.framework property. i.e. “net-3.5, net-4.0” to suddenly produce both framework builds. When you build, this is what you get (if you meet each framework’s requirements): At this time you have to let UC override the build location (as it does by default) or this will not work.  Semantic Versioning By now many of you have been using UppercuT for awhile and have watched how we have done versioning. Many of you who use git already know we put the revision hash in the informational/product version as the last octet. At v1, UppercuT has adopted the semantic versioning scheme. What does that mean? This is a short read, but a good one: http://SemVer.org SemVer (Semantic Versioning) is really using versioning what it was meant for. You have three octets. Major.Minor.Patch as in 1.1.0.  UC will use three different versioning concepts, one for the assembly version, one for the file version, and one for the product version. All versions - The first three octects of the version are owned by SemVer. Major.Minor.Patch i.e.: 1.1.0 Assembly Version - The assembly version would much closer follow SemVer. Last digit is always 0. Major.Minor.Patch.0 i.e: 1.1.0.0 File Version - The file version occupies the build number as the last digit. Major.Minor.Patch.Build i.e.: 1.1.0.2650 Product/Informational Version - The last octect of your product/informational version is the source control revision/hash. Major.Minor.Patch.RevisionOrHash i.e. (TFS/SVN): 1.1.0.235 i.e. (Git/HG): 1.1.0.a45ace4346adef0 SemVer is not on by default, the passive versioning scheme is still in effect. Notice that version.use_semanticversioning has been added to the UppercuT.config file (and version.patch in support of the third octet): Gems Support Gems support was added at v1. This will probably be deprecated as some point once there is an announced sunset for Nu v1. Application gems may keep it around since there is no alternative for that yet though (CoApp would be a possible replacement). Nitriq Support Nitriq is a code analysis tool like NDepend. It’s built by Mr. Jon von Gillern. It uses LINQ query language, so you can use a familiar idiom when analyzing your code base. It’s a pretty awesome tool that has a free version for those looking to do code analysis! To use Nitriq with UC, you are going to need the console edition.  To take advantage of Nitriq, you just need to update the location of Nitriq in the config: Then add the nitriq project files at the root of your source. Please refer to the Nitriq documentation on how these are created. UppercuT v1.1 Obfuscation One thing I started looking into was an easy way to obfuscate my code. I came across EazFuscator, which is both free and awesome. Plus the GUI for it is super simple to use. How do you make obfuscation even easier? Make it a convention and a configurable property in the UC config file! And the code gets obfuscated! Closing Definitely get out and look at the new release. It contains lots of chocolaty (sp?) goodness. And remember, the upgrade path is almost as simple as drag and drop!

  Read the article

• Turnkey with LightSwitch

  - by Laila

  Microsoft has long wanted to find a replacement for Microsoft Access. The best attempt yet, which is due out in, or before, September is Visual Studio LightSwitch, with which it is said to be as 'easy as flipping a switch' to use Silverlight to create simple form-driven business applications. It is easy to get confused by the various initiatives from Microsoft. No, this isn't WebMatrix. There is no 'Razor', for this isn't meant for cute little ecommerce sites, but is designed to build simple database-applications of the card-box type. It is more clearly a .NET-based solution to the problem that every business seems to suffer from; the plethora of Access-based, and Excel-based 'private' and departmental database-applications. These are a nightmare for any IT department since they are often 'stealth' applications built by the business in the teeth of opposition from the IT Department zealots. As they are undocumented, it is scarily easy to bring a whole department into disarray by decommissioning a PC tucked under a desk somewhere. With LightSwitch, it is easy to re-write such applications in a standard, maintainable, way, using a SQL Server database, deployed somewhere reasonably safe such as Azure. Even Sharepoint or Windows Communication Foundation can be used as data sources. Oracle's ApEx has taken off remarkably well, and has shaken the perception that, for the business user, Oracle must remain a mystic force accessible only to the priests and acolytes. Microsoft, by comparison had only Access, which was first released in 1992, the year of the Madonna conical bustier. It looks just as dated. Microsoft badly needed an entirely new solution to the same business requirement that led to Access's and Foxpro's long-time popularity, but which had the same allure as ApEx. LightSwitch is sound in its ideas, and comfortingly conventional in its architecture. By giving an easy access to SQL Server databases, and providing a 'thumb and blanket' migration path to Access-heads, LightSwitch seems likely to offer a simple way of pulling more Microsoft users into the .NET community. If Microsoft puts its weight behind it, then it will give some glimmer of hope to the many Silverlight developers that Microsoft is capable of seeing through its .NET revolution.

  Read the article

• My error with upgrading 4.0 to 4.2- What NOT to do...

  - by Steve Tunstall

  Last week, I was helping a client upgrade from the 2011.1.4.0 code to the newest 2011.1.4.2 code. We downloaded the 4.2 update from MOS, upload and unpacked it on both controllers, and upgraded one of the controllers in the cluster with no issues at all. As this was a brand-new system with no networking or pools made on it yet, there were not any resources to fail back and forth between the controllers. Each controller had it's own, private, management interface (igb0 and igb1) and that's it. So we took controller 1 as the passive controller and upgraded it first. The first controller came back up with no issues and was now on the 4.2 code. Great. We then did a takeover on controller 1, making it the active head (although there were no resources for it to take), and then proceeded to upgrade controller 2. Upon upgrading the second controller, we ran the health check with no issues. We then ran the update and it ran and rebooted normally. However, something strange then happened. It took longer than normal to come back up, and when it did, we got the "cluster controllers on different code" error message that one gets when the two controllers of a cluster are running different code. But we just upgraded the second controller to 4.2, so they should have been the same, right??? Going into the Maintenance-->System screen of controller 2, we saw something very strange. The "current version" was still on 4.0, and the 4.2 code was there but was in the "previous" state with the rollback icon, as if it was the OLDER code and not the newer code. I have never seen this happen before. I would have thought it was a bad 4.2 code file, but it worked just fine with controller 1, so I don't think that was it. Other than the fact the code did not update, there was nothing else going on with this system. It had no yellow lights, no errors in the Problems section, and no errors in any of the logs. It was just out of the box a few hours ago, and didn't even have a storage pool yet. So.... We deleted the 4.2 code, uploaded it from scratch, ran the health check, and ran the upgrade again. once again, it seemed to go great, rebooted, and came back up to the same issue, where it came to 4.0 instead of 4.2. See the picture below.... HERE IS WHERE I MADE A BIG MISTAKE.... I SHOULD have instantly called support and opened a Sev 2 ticket. They could have done a shared shell and gotten the correct Fishwork engineer to look at the files and the code and determine what file was messed up and fixed it. The system was up and working just fine, it was just on an older code version, not really a huge problem at all. Instead, I went ahead and clicked the "Rollback" icon, thinking that the system would rollback to the 4.2 code.   Ouch... What happened was that the system said, "Fine, I will delete the 4.0 code and boot to your 4.2 code"... Which was stupid on my part because something was wrong with the 4.2 code file here and the 4.0 was just fine.  So now the system could not boot at all, and the 4.0 code was completely missing from the system, and even a high-level Fishworks engineer could not help us. I had messed it up good. We could only get to the ILOM, and I had to re-image the system from scratch using a hard-to-get-and-use FishStick USB drive. These are tightly controlled and difficult to get, almost always handcuffed to an engineer who will drive out to re-image a system. This took another day of my client's time.  So.... If you see a "previous version" of your system code which is actually a version higher than the current version... DO NOT ROLL IT BACK.... It did not upgrade for a very good reason. In my case, after the system was re-imaged to a code level just 3 back, we once again tried the same 4.2 code update and it worked perfectly the first time and is now great and stable.  Lesson learned.  By the way, our buddy Ryan Matthews wanted to point out the best practice and supported way of performing an upgrade of an active/active ZFSSA, where both controllers are doing some of the work. These steps would not have helpped me for the above issue, but it's important to follow the correct proceedure when doing an upgrade. 1) Upload software to both controllers and wait for it to unpack 2) On controller "A" navigate to configuration/cluster and click "takeover" 3) Wait for controller "B" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 4) Wait for controller "B" to apply the update and finish rebooting 5) Login to controller "B", navigate to configuration/cluster and click "takeover" 6) Wait for controller "A" to finish restarting, then login to it, navigate to maintenance/system, and roll forward to the new software. 7) Wait for controller "A" to apply the update and finish rebooting 8) Login to controller "B", navigate to configuration/cluster and click "failback"

  Read the article

• What location to put bootloader, when running multiple drives and partition

  - by Matt G

  I have Win8 on my desktop, where a 120G SSD is used to run windows and some select applications, while I have a 2TB HDD to provide basic file storage and where possible, install applications instead of on the SSD. I want to install Ubuntu on a new partition of the HDD (I allocated 300GB, with 5GB swap file). I've used a USB to install the OS, which seemed to have done the job. However, after prompting for a restart, I can no longer boot to ubuntu. During instillation I was confused about where to install the "boot loader instillation". I ended up selecting "/dev/stb" because I figured I would be able to boot with BIOS by selecting the HDD drive as a priority over the SSD. The bootloader is a large part of where I think I went wrong. My partition system looked something like this: /dev/sta ... //SSD ~120 GB /dev/sta1 NTFS (350 MB) //Win8System /dev/sta2 NTFS (118 GB) //Win8C-Drive /dev/stb ... //HDD ~2TB /dev/stb1 NTFS (1563 GB) //FileStorage /dev/stb5 Free Space (300 GB) //Space I want to use for Linux (NOTE: Created two partitions from the 300GB, ~5GB and 295GB. stb5,stb6.) It'd be great if I could get an explanation of what drive you'd select for the boot loader and why, and what selections won't work with regards to the Boot Loader Instillation. I think I understand what Grub is, but I have no idea on how to use it, or play around with it. I seem to be able to get back into OS from my usb, however I believe it's just showing me a preview/trial of Ubuntu (ie, can't access any of the system NTFS drives). Note, if I try to install from the USB again, it will recognize that a version of Ubuntu 13.10 exists on the system. Apologies in advance, have used windows all my life, don't really know to much about Linux at all. Did have a brief skim over some similar questions, didn't find anything too useful. - Where to install bootloader when installing Ubuntu as secondary OS? - ubuntu 12.10 dual boot with windows 8 on two hdds - Dual-boot Windows 7 and Ubuntu on two SSDs with UEFI

  Read the article

• Would someone please explain Octree Collisions to me?

  - by A-Type

  I've been reading everything I can find on the subject and I feel like the pieces are just about to fall into place, but I just can't quite get it. I'm making a space game, where collisions will occur between planets, ships, asteroids, and the sun. Each of these objects can be subdivided into 'chunks', which I have implemented to speed up rendering (the vertices can and will change often at runtime, so I've separated the buffers). These subdivisions also have bounding primitives to test for collision. All of these objects are made of blocks (yeah, it's that kind of game). Blocks can also be tested for rough collisions, though they do not have individual bounding primitives for memory reasons. I think the rough testing seems to be sufficient, though. So, collision needs to be fairly precise; at block resolution. Some functions rely on two blocks colliding. And, of course, attacking specific blocks is important. Now what I am struggling with is filtering my collision pairs. As I said, I've read a lot about Octrees, but I'm having trouble applying it to my situation as many tutorials are vague with very little code. My main issues are: Are Octrees recalculated each frame, or are they stored in memory and objects are shuffled into different divisions as they move? Despite all my reading I still am not clear on this... the vagueness of it all has been frustrating. How far do Octrees subdivide? Planets in my game are quite large, while asteroids are smaller. Do I subdivide to the size of the planet, or asteroid (where planet is in multiple divisions)? Or is the limit something else entirely, like number of elements in the division? Should I load objects into the octrees as 'chunks' or in the whole, then break into chunks later? This could be specific to my implementation, I suppose. I was going to ask about how big my root needed to be, but I did manage to find this question, and the second answer seems sufficient for me. I'm afraid I don't really get what he means by adding new nodes and doing subdivisions upon adding new objects, probably because I'm confused about whether the tree is maintained in memory or recalculated per-frame.

  Read the article

• TechEd 2012: Windows 8 And Metro

  - by Tim Murphy

  Windows 8 is here (or at least very close) and that was the main feature of this morning’s key note.  Antoine LeBlond started off by apologizing to the IT professionals since he planned on showing code.  I’m not sure if IT Pros are that easily confused or why you would need such a disclaimer.  Developers do real work, IT Pros just play with toys (just kidding). The highlights of the Windows 8 keynote for me started with some of the UI design elements that I had not seen when I was shown one of the Build tablets.  Specifically I liked the AppBar features that we have become used to with Windows Phone and some of the gesture features.  Even though they have been available on other platforms before I think Microsoft really got them right. Two other great features of Windows 8 that they demonstrated were the Hyper-V capabilities and the ability to run Windows 8 anywhere from a USB key.  My jaw dropped through the floor seeing a feature rich OS boot off of a thumb drive. WOW!  I also can’t wait to get rid of dual booting just to run Hyper-V images when developing. The morning continued with a session on Metro XAML development with Tim Heuer.  While included a lot of great XAML Metro demos, I was pleasantly surprised by some of the things I found out about Visual Studio 2012.  Finding out that Blend is now integrated with VS2012 was a nice addition after working with them as separate applications was an encouraging start. Moving on to Metro he introduced the nugget that WinRT is Async everywhere.  How deep this model goes will be an interesting thing to find out as I learn more about developing for the platform.  Thankfully he followed that up with a couple of new keywords, await and async, that eliminates a lot of plumbing that has been required in the past for asynchronous transactions. Tim also related that since the Metro framework is relatively small and most apps will use a significant amount of it the entire surface is referenced by default.  This is a contrast to adding namespace and assemblies one after another as we normally do. This was such a power packed session that I can’t detail it all here so here is the teaser list. New icons in VS2012 for extension methods Emulator/simulator testing features for gestures Portable class libraries XAML no longer managed code And so much more …   del.icio.us Tags: Windows 8,Metro,Tim Heuer,XAML,Widows Phone,Hyper-V,Antoine LeBlond,TechEd,TechEd 2012,Visual Studio 2012,Visual Studio

  Read the article

• How to handle this unfortunately non hypothetical situation with end-users?

  - by User Smith

  I work in a medium sized company but with a very small IT force. Last year (2011), I wrote an application that is very popular with a large group of end-users. We hit a deadline at the end of last year and some functionality (I will call funcA from now on) was not added into the application that was wanted at the very end. So, this application has been running in live/production since the end of 2011, I might add without issue. Yesterday, a whole group of end-users started complaining that funcA that was never in the application is no longer working. Our priority at this company is that if an application is broken it must be fixed first prior to prioritized projects. I have compared code and queries and there is no difference since 2011, which is proofA. I then was able to get one of the end-users to admit that it never worked proofB, but since then that end-user has went back and said that it was working previously......I believe the horde of end-users has assimilated her. I have also reviewed my notes for this project which has requirements and daily updates regarding the project which specifically states, "funcA not achieved due to time constraints", proofC. I have spoken with many of them and I can see where they could be confused as they are very far from a programming background, but I also know they are intelligent enough to act in a group in order to bypass project prioritization orders in order to get functionality that they want to make their job easier. The worst part is is that now group think is setting in and my boss and the head of IT is actually starting to believe them, even though there is no code or query changes. As far as reviewing the state of the logic it is very cut and dry to the point of if 1 = 1, funcA will not work. So, this is the end of the description of my scenario, but I am trying not to get severally dinged on my performance metrics due to this which would essentially have me moved to fixing a production problem that doesn't exist that will probably take over 1 month. I am looking for direct answers to this question. This question is not for rants, polling, or discussions as this is not the format for StackExchange. Please don't downvote me too terribly it is pretty common on this specific site of stack, I am looking for honest answers to this situation and I couldn't find a forum more appropriate.

  Read the article

• Ideas for time-keeping in a webbased RPG?

  - by ashy_32bit

  I'm assigned a task of doing the preliminary research stuff for a web-based MMO RPG. Now my buggiest problem here is "web based" vs "MMO RPG". I did some research about time keeping systems and I'm totally confused as how exactly something as real-time as an MMO-RPG can work on some pull-only (unidirectional) platform like HTTP. I know there is also a turn-based alternative to time keeping but can it work in an MMO setting ? EDIT: Take a battle for example, player A (human) wants to attack Player B (also human) in the open. How does it work when when player A issues the "attack" command on player B ? how do I inform player B that he is being attacked ? and then how exactly the battle goes on between the two in an HTTP based communication channel? To my knowledge this is impossible unless you resort to another technology (HTML is 1-way, that is you can just ask server and get response, server can't update you unless being asked to. this is very well-known and simply explained). So I though maybe I can somehow change the whole timekeeping model from real-time to a more non-real-time model (towards a turn based RPG for example) and somehow work around the whole problem of "interactivity". EDIT2: It is not that I don't wanna use any server side technologies. For sure it is not gonna work client-side-only even for the most trivial of the multi-player games, let alone an RPG. So sure there would be a (probably complex) server side component to it (the so called Game Engine I suppose). The problem is not the technology that implements the logic (game mechanics) bits but the communication technology and how it limits the game mechanics abilities (like how real-time or turn based it is gonna be). HTTP is a request-response protocol meaning you get served only if you ask for it (explicitly send a GET or POST request to the server). HTTP server can not inform you if anything of interest happens in the game world unless you refresh the page (as some suggested) or you use some bi-directional tech (totally different animals) like Flash, WebSock, HTML5 etc etc. So maybe the question is: Is it possible to implement a MMORPG using only HTML5/PHP and no periodic page refreshes? if so what would be rules to make it an MMO-RPG? Can't explain it any clearer. Sorry :D

  Read the article

• Issues with LVM partition size in Server 13.04

  - by Michael

  I am new to ubuntu and a little confused about how hard drive partitions and LVM works. I remember setting up Ubuntu server 13.04 and telling to to use 1TB of a 3TB server. Well I have maxed that out with blu-ray rips and want the rest of the drive for space. On log-in it says: System load: 2.24 Processes: 179 Usage of /: 88.7% of 912.89GB Users logged in: 0 Memory usage: 6% IP address for p5p1: 192.168.0.100 Swap usage: 0% => / is using 88.7% of 912.89GB lvdisplay outputs: --- Logical volume --- LV Path /dev/DeathStar-vg/root LV Name root VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 1 LV Size 2.70 TiB Current LE 707789 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:0 --- Logical volume --- LV Path /dev/DeathStar-vg/swap_1 LV Name swap_1 VG Name DeathStar-vg LV Write Access read/write LV Creation host, time DeathStar, 2013-05-18 22:21:11 -0400 LV Status available # open 2 LV Size 3.75 GiB Current LE 959 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 252:1 vgdisplay outputs: VG Name DeathStar-vg System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size 2.73 TiB PE Size 4.00 MiB Total PE 715335 Alloc PE / Size 708748 / 2.70 TiB Free PE / Size 6587 / 25.73 GiB df outputs: Filesystem 1K-blocks Used Available Use% Mounted on /dev/mapper/DeathStar--vg-root 957238932 848972636 59634696 94% / none 4 0 4 0% /sys/fs/cgroup udev 1864716 4 1864712 1% /dev tmpfs 374968 1060 373908 1% /run none 5120 4 5116 1% /run/lock none 1874824 148 1874676 1% /run/shm none 102400 24 102376 1% /run/user /dev/sda2 234153 56477 165184 26% /boot And fdisk /dev/sda -l outputs: Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 4294967295 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. I just don't know what to make of all this and am not sure how I can make it use all 2.73TBs. Thanks in advance for any help. EDIT-- Yes I did make changes to the LVM Config, but it didnt do anything. As requested, output of parted -l /dev/sda Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sda: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2097kB 1049kB bios_grub 2 2097kB 258MB 256MB ext2 3 258MB 3001GB 3000GB lvm Model: ATA WDC WD30EFRX-68A (scsi) Disk /dev/sdb: 3001GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-swap_1: 4022MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4022MB 4022MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/DeathStar--vg-root: 2969GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2969GB 2969GB ext4

  Read the article

• Rebuilding CoasterBuzz, Part II: Hot data objects

  - by Jeff

  This is the second post, originally from my personal blog, in a series about rebuilding one of my Web sites, which has been around for 12 years. More: Part I: Evolution, and death to WCF After the rush to get moving on stuff, I temporarily lost interest. I went almost two weeks without touching the project, in part because the next thing on my backlog was doing up a bunch of administrative pages. So boring. Unfortunately, because most of the site's content is user-generated, you need some facilities for editing data. CoasterBuzz has a database full of amusement parks and roller coasters. The entities enjoy the relationships that you would expect, though they're further defined by "instances" of a coaster, to define one that has moved between parks as one, with different names and operational dates. And of course, there are pictures and news items, too. It's not horribly complex, except when you have to account for a name change and display just the newest name. In all previous versions, data access was straight SQL. As so much of the old code was rooted in 2003, with some changes in 2008, there wasn't much in the way of ORM frameworks going on then. Let me rephrase that, I mostly wasn't interested in ORM's. Since that time, I used a little LINQ to SQL in some projects, and a whole bunch of nHibernate while at Microsoft. Through all of that experience, I have to admit that these frameworks are often a bigger pain in the ass than not. They're great for basic crud operations, but when you start having all kinds of exotic relationships, they get difficult, and generate all kinds of weird SQL under the covers. The black box can quickly turn into a black hole. Sometimes you end up having to build all kinds of new expertise to do things "right" with a framework. Still, despite my reservations, I used the newer version of Entity Framework, with the "code first" modeling, in a science project and I really liked it. Since it's just a right-click away with NuGet, I figured I'd give it a shot here. My initial effort was spent defining the context class, which requires a bit of work because I deviate quite a bit from the conventions that EF uses, starting with table names. Then throw some partial querying of certain tables (where you'll find image data), and you're splitting tables across several objects (navigation properties). I won't go into the details, because these are all things that are well documented around the Internet, but there was a minor learning curve there. The basics of reading data using EF are fantastic. For example, a roller coaster object has a park associated with it, as well as a number of instances (if it was ever relocated), and there also might be a big banner image for it. This is stupid easy to use because it takes one line of code in your repository class, and by the time you pass it to the view, you have a rich object graph that has everything you need to display stuff. Likewise, editing simple data is also, well, simple. For this goodness, thank the ASP.NET MVC framework. The UpdateModel() method on the controllers is very elegant. Remember the old days of assigning all kinds of properties to objects in your Webforms code-behind? What a time consuming mess that used to be. Even if you're not using an ORM tool, having hydrated objects come off the wire is such a time saver. Not everything is easy, though. When you have to persist a complex graph of objects, particularly if they were composed in the user interface with all kinds of AJAX elements and list boxes, it's not just a simple matter of submitting the form. There were a few instances where I ended up going back to "old-fashioned" SQL just in the interest of time. It's not that I couldn't do what I needed with EF, it's just that the efficiency, both my own and that of the generated SQL, wasn't good. Since EF context objects expose a database connection object, you can use that to do the old school ADO.NET stuff you've done for a decade. Using various extension methods from POP Forums' data project, it was a breeze. You just have to stick to your decision, in this case. When you start messing with SQL directly, you can't go back in the same code to messing with entities because EF doesn't know what you're changing. Not really a big deal. There are a number of take-aways from using EF. The first is that you write a lot less code, which has always been a desired outcome of ORM's. The other lesson, and I particularly learned this the hard way working on the MSDN forums back in the day, is that trying to retrofit an ORM framework into an existing schema isn't fun at all. The CoasterBuzz database isn't bad, but there are design decisions I'd make differently if I were starting from scratch. Now that I have some of this stuff done, I feel like I can start to move on to the more interesting things on the backlog. There's a lot to do, but at least it's fun stuff, and not more forms that will be used infrequently.

  Read the article

• How do I take responsibility for my code when colleague makes unnecessary improvements without notice?

  - by Jesslyn

  One of my teammates is a jack of all trades in our IT shop and I respect his insight. However, sometimes he reviews my code (he's second in command to our team leader, so that's expected) without a heads up. So sometimes he reviews my changes before they complete the end goal and makes changes right away... and has even broken my work once. Other times, he has made unnecessary improvements to some of my code that is 3+ months old. This annoys me for a few reasons: I am not always given a chance to fix my mistakes He has not taken the time to ask me what I was trying to accomplish when he is confused, which could affect his testing or changes I don't always think his code is readable Deadlines are not an issue and his current workload doesn't require any work in my projects other than reviewing my code changes. Anyways, I have told him in the past to please keep me posted if he sees something in my work that he wants to change so that I could take ownership of my code (maybe I should have said "shortcomings") and he's not been responsive. I fear that I may come off as aggressive when I ask him to explain his changes to me. He's just a quiet person who keeps to himself, but his actions continue. I don't want to banish him from making code changes (not like I could), because we are a team--but I want to do my part to help our team. Added clarifications: We share 1 development branch. I do not wait until all my changes complete a single task because I risk losing some significant work--so I make sure my changes build and do not break anything. My concern is that my teammate doesn't explain the reason or purpose behind his changes. I don't think he should need my blessing, but if we disagree on an approach I thought it would be best to discuss the pros and cons and make a decision once we both understand what is going on. I have not discussed this with our team lead yet as I would prefer to resolve personal disagreements without getting management involved unless it is necessary. Since my concern seemed more of personal issue than a threat to our work, I chose to not bother the team lead. I am working on code review process ideas--to help promote the benefits of more organized code reviews without making it all about my pet peeves.

  Read the article

• [JAVA]How to make my Oracle update/insert action through JAVA faster?

  - by gunbuster363

  [JAVA]How to make my Oracle update/insert action through JAVA faster? Hi everyone, I am facing a problem in my company that is - our program's speed is not fast enough. To be more specific, we are telecommunication company and this program handle call/internet serfing transaction made by every mobile phone users in our city. Because the amount of download content made by the iphone users is just too much, our program cannot handle them fast enough. The situation is, the amount of transaction made by users are double of the transaction processed by our program. Most of the running time of the program are dominated by DB transactions. I've search through the internet and browsed some sites ( for example: http://www.javaperformancetuning.com/tips/rawtips.shtml ) talking about java performace in DB, but I cannot find a suggestion suitable for us. these advices are not applicable/already used, for instance: 1)Use prepared statements. Use parametrized SQL Already used prepared statement. Each time will use different parameter by clear parameters and set parameters. 2)Tune the SQL to minimize the data returned (e.g. not 'SELECT *'). Sure, already used. 3)Use connection pooling. We hold a single connection during the program's execution. And I doubt that pooling cannot solve the problem because our program act as 1 user, so there are no problem for concurrent access to DB. If anyone of you think pooling is good, please tell me why. Thanks. 4)Try to combine queries and batch updates. Cannot do it. Every query/insert/update is depend on the database's information. For example, we look up the DB for the client's information, if we cannot find his usage, we insert the usage into DB, otherwise we do update. 5)Close resources (Connections, Statements, ResultSets) when finished Sure. 6)Select the fastest JDBC driver. I don't know. I've search on the internet about the type of driver available and I am very confused. We use oracle.jdbc.driver.OracleDriver and we use thin instead of oci, that's all I know. In addition, our program is a two-tier way ( java <- oracle ) 7)turn off auto-commit already done that. Looking forwards to any helps, thank you very much.

  Read the article

• What are the differences between abstract classes, interfaces, and when to use them

  - by user66662

  Recently I have started to wrap my head around OOP, and I am now to the point where the more I read about the differences between Abstract classes and Interfaces the more confused I become. So far, neither can be instantiated. Interfaces are more or less structural blueprints that determine the skeleton and abstracts are different by being able to partially develop code. I would like to learn more about these through my specific situation. Here is a link to my first question if you would like a little more background information: What is a good design model for my new class? Here are two classes I created: class Ad { $title; $description $price; function get_data($website){ } function validate_price(){ } } class calendar_event { $title; $description $start_date; function get_data($website){ //guts } function validate_dates(){ //guts } } So, as you can see these classes are almost identical. Not shown here, but there are other functions, like get_zip(), save_to_database() that are common across my classes. I have also added other classes Cars and Pets which have all the common methods and of course properties specific to those objects (mileage, weight, for example). Now I have violated the DRY principle and I am managing and changing the same code across multiple files. I intend on having more classes like boats, horses, or whatever. So is this where I would use an interface or abstract class? From what I understand about abstract classes I would use a super class as a template with all of the common elements built into the abstract class, and then add only the items specifically needed in future classes. For example: abstract class content { $title; $description function get_data($website){ } function common_function2() { } function common_function3() { } } class calendar_event extends content { $start_date; function validate_dates(){ } } Or would I use an interface and, because these are so similar, create a structure that each of the subclasses are forced to use for integrity reasons, and leave it up to the end developer who fleshes out that class to be responsible for each of the details of even the common functions. my thinking there is that some 'common' functions may need to be tweaked in the future for the needs of their specific class. Despite all that above, if you believe I am misunderstanding the what and why of abstracts and interfaces altogether, by all means let a valid answer to be stop thinking in this direction and suggest the proper way to move forward! Thanks!

  Read the article

• Image first loaded, then it isn't? (XNA)

  - by M0rgenstern

  I am very confused at the Moment. I have the following Class: (Just a part of the class): public class GUIWindow { #region Static Fields //The standard image for windows. public static IngameImage StandardBackgroundImage; #endregion } IngameImage is just one of my own classes, but actually it contains a Texture2D (and some other things). In another class I load a list of GUIButtons by deserializing a XML file. public static GUI Initializazion(string pXMLPath, ContentManager pConMan) { GUI myGUI = pConMan.Load<GUI>(pXMLPath); GUIWindow.StandardBackgroundImage = new IngameImage(pConMan.Load<Texture2D>(myGUI.WindowStandardBackgroundImagePath), Vector2.Zero, 1024, 600, 1, 0, Color.White, 1.0f, true, false, false); System.Console.WriteLine("Image loaded? " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); myGUI.Windows = pConMan.Load<List<GUIWindow>>(myGUI.GUIFormatXMLPath); System.Console.WriteLine("Windows loaded"); return myGUI; } Here this line: System.Console.WriteLine("Image loaded? " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); Prints "true". To load the GUIWindows I need an "empty" constructor, which looks like that: public GUIWindow() { Name = ""; Buttons = new List<Button>(); ImagePath = ""; System.Console.WriteLine("Image loaded? (In win) " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); //Image = new IngameImage(StandardBackgroundImage); //System.Console.WriteLine( //Image.IsActive = false; SelectedButton = null; IsActive = false; } As you can see, I commented lines out in the constructor. Because: Otherwise this would crash. Here the line System.Console.WriteLine("Image loaded? (In win) " + (GUIWindow.StandardBackgroundImage.ImageStrip != null)); Doesn't print anything, it just crashes with the following errormessage: Building content threw NullReferenceException: Object reference not set to an object instance. Why does this happen? Before the program wants to load the List, it prints "true". But in the constructor, so in the loading of the list it prints "false". Can anybody please tell me why this happens and how to fix it?

  Read the article

• need some concrete examples on user stories, tasks and how they relate to functional and technical specifications

  - by gideon

  Little heads up, Im the only lonely dev building/planning/mocking my project as I go. Ive come up with a preview release that does only the core aspects of the system, with good business value and I've coded most of the UI as dirty throw-able mockups over nicely abstracted and very minimal base code. In the end I know quite well what my clients want on the whole. I can't take agile-ish cowboying anymore because Im completely dis-organized and have no paper plan and since my clients are happy, things are getting more complex with more features and ideas. So I started using and learning Agile & Scrum Here are my problems: I know what a functional spec is.(sample): Do all user stories and/or scenarios become part of the functional spec? I know what user stories and tasks are. Are these kinda user stories? I dont see any Business Value reason added to them. I made a mind map using freemind, I had problems like this: Actor : Finance Manager Can Add a Financial Plan into the system because well thats the point of it? What Business Value reason do I add for things like this? Example : A user needs to be able to add a blog article (in the blogger app) because..?? Its the point of a blogger app, it centers around that feature? How do I go into the finer details and system definitions: Actor: Finance Manager Action: Adds a finance plan. This adding is a complicated process with lots of steps. What User Story will describe what a finance plan in the system is ?? I can add it into the functional spec under definitions explaining what a finance plan is and how one needs to add it into the system, but how do I get to the backlog planning from there? Example: A Blog Article is mostly a textual document that can be written in rich text in the system. To add a blog article one must...... But how do you create backlog list/features out of this? Where are the user stories for what a blog article is and how one adds/removes it? Finally, I'm a little confused about the relations between functional specs and user stories. Will my spec contain user stories in them with UI mockups? Now will these user stories then branch out tasks which will make up something like a technical specification? Example : EditorUser Can add a blog article. Use XML to store blog article. Add a form to add blog. Add Windows Live Writer Support. That would be agile tasks but would that also be part of/or form the technical specs? Some concrete examples/answers of my questions would be nice!!

  Read the article

• Creating a voxel chunk with a VBO - How to translate the coordinates of each block and add it to the VBO chunk?

  - by sunsunsunsunsun

  Im trying to make a voxel engine similar to minecraft as a little learning experience and a way to learn some opengl. I have created a chunk class and I want to put all of the vertices for the whole chunk into a single VBO. I was previously only putting each block into a vbo and making a call to render each block. Anyways, I am a bit confused about how I can translate the coordinates of each block in the chunk when I'm putting all vertices into one vbo. This is what I have at the moment. public void putVertices(float tx, float ty, float tz) { float l_length = 1.0f; float l_height = 1.0f; float l_width = 1.0f; vertexPositionData.put(new float[]{ xOffset + l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, l_height + ty,zOffset + l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + -l_length + tx, l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty, zOffset + -l_width + tz, xOffset + -l_length + tx, -l_height + ty,zOffset + l_width + tz, xOffset + l_length + tx, l_height + ty,zOffset + -l_width + tz, xOffset + l_length + tx, l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + l_width + tz, xOffset + l_length + tx, -l_height + ty, zOffset + -l_width + tz }); } public void createChunk() { vertexPositionData = BufferUtils.createFloatBuffer((24*3)*activateBlocks); Random random = new Random(); for (int x = 0; x < CHUNK_SIZE; x++) { for (int y = 0; y < CHUNK_SIZE; y++) { for (int z = 0; z < CHUNK_SIZE; z++) { if(blocks[x][y][z].getActive()) { putVertices(x*2.0f, y*2.0f, z*2.0f); } } } } Whats any easy way to translate the vertices of each block into its correct position? I was previously using glTranslatef with each call to render block but this wont work now. What I am doing now also does not work, the blocks all render in stacks on top of each other and it looks like this: http://i.imgur.com/NyFtBTI.png Thanks

  Read the article

• When to use typedef?

  - by futlib

  I'm a bit confused about if and when I should use typedef in C++. I feel it's a balancing act between readability and clarity. Here's a code sample without any typedefs: int sum(std::vector<int>::const_iterator first, std::vector<int>::const_iterator last) { static std::map<std::tuple<std::vector<int>::const_iterator, std::vector<int>::const_iterator>, int> lookup_table; std::map<std::tuple<std::vector<int>::const_iterator, std::vector<int>::const_iterator>, int>::iterator lookup_it = lookup_table.find(lookup_key); if (lookup_it != lookup_table.end()) return lookup_it->second; ... } Pretty ugly IMO. So I'll add some typedefs within the function to make it look nicer: int sum(std::vector<int>::const_iterator first, std::vector<int>::const_iterator last) { typedef std::tuple<std::vector<int>::const_iterator, std::vector<int>::const_iterator> Lookup_key; typedef std::map<Lookup_key, int> Lookup_table; static Lookup_table lookup_table; Lookup_table::iterator lookup_it = lookup_table.find(lookup_key); if (lookup_it != lookup_table.end()) return lookup_it->second; ... } The code is still a bit clumsy, but I get rid of most nightmare material. But there's still the int vector iterators, this variant gets rid of those: typedef std::vector<int>::const_iterator Input_iterator; int sum(Input_iterator first, Input_iterator last) { typedef std::tuple<Input_iterator, Input_iterator> Lookup_key; typedef std::map<Lookup_key, int> Lookup_table; static Lookup_table lookup_table; Lookup_table::iterator lookup_it = lookup_table.find(lookup_key); if (lookup_it != lookup_table.end()) return lookup_it->second; ... } This looks clean, but is it still readable? When should I use a typedef? As soon as I have a nightmare type? As soon as it occurs more than once? Where should I put them? Should I use them in function signatures or keep them to the implementation?

  Read the article

• Investment scheme for a PC game the project

  - by Alex Kamen

  Good day everyone, I am working on a PC game project that has 3 phases planned, micro, macro and mmo versions [if confused, see a brief description at the bottom]. I have found a potential investor for the micro version of the game, but naturally, he requested a detailed plan of how the game will pay back. And the problem is that micro version itself is not supposed to be monetized much, other than some ads and limited in-game currency utilization. The idea is that with this combat demo already at hand, it should be possible to get a really large enough investment (millions of dollars) and use it to pay back the initial small one (thousands of dollars) and take the project into macro phase, which will really make profit. This way, everybody is going to win, provided that I can deliver the end-product. Yet while I am confident of that both the conception of the macro and the real game-play of the micro versions are going to be appealing, I don’t know how to obtain any guarantee of that I will be able to get funded once I have the prototype ready. And without that, I won’t receive the funds for the prototype in the first place! To summarize, my question is: how to figure out my future possibilities of getting funded once I have combat demo out, basically “whom to write to and what”. Ideally, I would like some sort of a preliminary agreement with a game publisher, something that would basically state “If the developer provides the product in time and in quality corresponding to the specifications given, the publisher guarantees to allocate funds for distribution and further development, thereby acquiring the right to X part of all future profits”. Does this sound sane? It’s just that I don’t want to sell all of my rights out straight away by taking a big outside investment while the project is in such early stage. I would appreciate if you would share your thoughts on this kind of scheme, and be sure to ask questions as I am sure I must have forgotten to mention a ton of important things, like the fact that initial funds are going to be spent on outsourcing (living in Siberia is really just great). [here’s a brief outline of what each version will feature] [micro] 1) turn based tactical combat rules 2) character development 3) arena/tournament system [macro] 4) ai-ruled dynamic interactive worlds 5) global map adventuring 6) strategic rpg + god simulator gameplay [mmo] 7) Persistent worlds system 8) Social structures system (“guilds/clans”) 9) god-simulation on the mmo scale P.S. Obviously, these features are incremental, so that mmo version has all 9.

  Read the article

• Methodology to understanding JQuery plugin & API's developed by third parties

  - by Taoist

  I have a question about third party created JQuery plug ins and API's and the methodology for understanding them. Recently I downloaded the JQuery Masonry/Infinite scroll plug in and I couldn't figure out how to configure it based on the instructions. So I downloaded a fully developed demo, then manually deleted everything that wouldn't break the functionality. The code that was left allowed me to understand the plug in much greater detail than the documentation. I'm now having a similar issue with a plug in called JQuery knob. http://anthonyterrien.com/knob/ If you look at the JQuery Knob readme file it says this is working code: $(function() { $('.dial') .trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); But as far as I can tell it isn't at all. The read me also says the Plug in uses Canvas. I am wondering if I am suppose to wrap this code in a canvas context or if this functionality is already part of the plug in. I know this kind of "question" might not fit in here but I'm a bit confused on the assumptions around reading these kinds of documentation and thought I would post the query regardless. Curious to see if this is due to my "newbi" programming experience or if this is something seasoned coders also fight with. Thank you. Edit In response to Tyanna's reply. I modified the code and it still doesn't work. I posted it below. I made sure that I checked the Google Console to insure the basics were taken care of, such as not getting a read-error on the library. <!DOCTYPE html> <meta charset="UTF-8"> <title>knob</title> <link rel="stylesheet" href="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/hot-sneaks/jquery-ui.css" type="text/css" /> <script type="text/javascript" src="https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.js" charset="utf-8"></script> <script src="https://ajax.googleapis.com/ajax/libs/jqueryui/1.8.21/jquery-ui.min.js"></script> <script src="js/jquery.knob.js"></script> <div id="button1">test </div> <script> $(function() { $("#button1").click(function () { $('.dial').trigger( 'configure', { "min":10, "max":40, "fgColor":"#FF0000", "skin":"tron", "cursor":true } ); }); }); </script>

  Read the article

• What Counts for A DBA - Logic

  - by drsql

  "There are 10 kinds of people in the world. Those who will always wonder why there are only two items in my list and those who will figured it out the first time they saw this very old joke."  Those readers who will give up immediately and get frustrated with me for not explaining it to them are not likely going to be great technical professionals of any sort, much less a programmer or administrator who will be constantly dealing with the common failures that make up a DBA's day.  Many of these people will stare at this like a dog staring at a traffic signal and still have no more idea of how to decipher the riddle. Without explanation they will give up, call the joke "stupid" and, feeling quite superior, walk away indignantly to their job likely flipping patties of meat-by-product. As a data professional or any programmer who has strayed  to this very data-oriented blog, you would, if you are worth your weight in air, either have recognized immediately what was going on, or felt a bit ignorant.  Your friends are chuckling over the joke, but why is it funny? Unfortunately you left your smartphone at home on the dresser because you were up late last night programming and were running late to work (again), so you will either have to fake a laugh or figure it out.  Digging through the joke, you figure out that the word "two" is the most important part, since initially the joke mentioned 10. Hmm, why did they spell out two, but not ten? Maybe 10 could be interpreted a different way?  As a DBA, this sort of logic comes into play every day, and sometimes it doesn't involve nerdy riddles or Star Wars folklore.  When you turn on your computer and get the dreaded blue screen of death, you don't immediately cry to the help desk and sit on your thumbs and whine about not being able to work. Do that and your co-workers will question your nerd-hood; I know I certainly would. You figure out the problem, and when you have it narrowed down, you call the help desk and tell them what the problem is, usually having to explain that yes, you did in fact try to reboot before calling.  Of course, sometimes humility does come in to play when you reach the end of your abilities, but the ‘end of abilities’ is not something any of us recognize readily. It is handy to have the ability to use logic to solve uncommon problems: It becomes especially useful when you are trying to solve a data-related problem such as a query performance issue, and the way that you approach things will tell your coworkers a great deal about your abilities.  The novice is likely to immediately take the approach of  trying to add more indexes or blaming the hardware. As you become more and more experienced, it becomes increasingly obvious that performance issues are a very complex topic. A query may be slow for a myriad of reasons, from concurrency issues, a poor query plan because of a parameter value (like parameter sniffing,) poor coding standards, or just because it is a complex query that is going to be slow sometimes. Some queries that you will deal with may have twenty joins and hundreds of search criteria, and it can take a lot of thought to determine what is going on.  You can usually figure out the problem to almost any query by using basic knowledge of how joins and queries work, together with the help of such things as the query plan, profiler or monitoring tools.  It is not unlikely that it can take a full day’s work to understand some queries, breaking them down into smaller queries to find a very tiny problem. Not every time will you actually find the problem, and it is part of the process to occasionally admit that the problem is random, and everything works fine now.  Sometimes, it is necessary to realize that a problem is outside of your current knowledge, and admit temporary defeat: You can, at least, narrow down the source of the problem by looking logically at all of the possible solutions. By doing this, you can satisfy your curiosity and learn more about what the actual problem was. For example, in the joke, had you never been exposed to the concept of binary numbers, there is no way you could have known that binary - 10 = decimal - 2, but you could have logically come to the conclusion that 10 must not mean ten in the context of the joke, and at that point you are that much closer to getting the joke and at least won't feel so ignorant.

  Read the article

• Does the method of adjustment matter, or just the final calibration?

  - by Steve

  A company produces software (and hardware) that is used to both perform automatic adjustments on electronic test equipment as well as perform calibrations of the same equipment. The results of the calibrations are put onto a certificate of calibration that is sent to the customer along with the equipment. This calibration certificate states various conditions of the calibration, such as what hardware (models/serial numbers) and software (version) was used to perform the calibration, as well as things like environmental conditions, etc. Making the assumption that the software used to produce the data (and listed on the calibration certificate) used on the certificate of calibration must have gone through a "test/release" process and must be considered "released" software - does this also mean that the software used for adjustment must also be released? I believe that the method (software/environmental conditions/etc) used or present during adjustment doesn't matter, all that really matters is the end result of the calibration, the conditions present during the calibration, and whether or not the equipment was within the specifications. The real question I'm hoping to get answered: Is there a reputable source (e.g. NIST or somewhere similar) that addresses this question? (I have searched...) The thinking is that during high volume production runs, the "unreleased" system can be used to perform adjustments, as long as a released system is used to perform the calibrations, since the time required to perform the adjustments is much longer than the calibration. This unreleased system will eventually become released for use, but currently is not. Also, please not that there is a distinction between "adjustment" and "calibration". The definition from BIPM International vocabulary of metrology, 2.39: Operation that, under specified conditions, in a first step, establishes a relation between the quantity values with measurement uncertainties provided by measurement standards and corresponding indications with associated measurement uncertainties (of the calibrated instrument or secondary standard) and, in a second step, uses this information to establish a relation for obtaining a measurement result from an indication. Followed by NOTE 2 (emphasis in original text): Calibration should not be confused with adjustment of a measuring system, often mistakenly called "self-calibration", nor with verification of calibration As a side note, I'm not sure why this got down voted. It's regarding software and it's use before and after release for use. I believe there is a best practice that can be applied and this is (hopefully) not primarily opinion based.

  Read the article

• C Minishell Command Expansion Printing Gibberish

  - by Optimus_Pwn

  I'm writing a unix minishell in C, and am at the point where I'm adding command expansion. What I mean by this is that I can nest commands in other commands, for example: $> echo hello $(echo world! ... $(echo and stuff)) hello world! ... and stuff I think I have it working mostly, however it isn't marking the end of the expanded string correctly, for example if I do: $> echo a $(echo b $(echo c)) a b c $> echo d $(echo e) d e c See it prints the c, even though I didn't ask it to. Here is my code: msh.c - http://pastebin.com/sd6DZYwB expand.c - http://pastebin.com/uLqvFGPw I have a more code, but there's a lot of it, and these are the parts that I'm having trouble with at the moment. I'll try to tell you the basic way I'm doing this. Main is in msh.c, here it gets a line of input from either the commandline or a shellfile, and then calls processline (char *line, int outFD, int waitFlag), where line is the line we just got, outFD is the file descriptor of the output file, and waitFlag tells us whether or not we should wait if we fork. When we call this from main we do it like this: processline (buffer, 1, 1); In processline, we allocate a new line: char expanded_line[EXPANDEDLEN]; We then call expand, in expand.c: expand(line, expanded_line, EXPANDEDLEN); In expand, we copy the characters literally from line to expanded_line until we find a $(, which then calls: static int expCmdOutput(char *orig, char *new, int *oldl_ind, int *newl_ind) orig is line, and new is expanded line. oldl_ind and newl_ind are the current positions in the line and expanded line, respectively. Then we pipe, and recursively call processline, passing it the nested command(for example, if we had "echo a $(echo b)", we would pass processline "echo b"). This is where I get confused, each time expand is called, is it allocating a new chunk of memory EXPANDEDLEN long? If so, this is bad because I'll run out of stack room really quickly(in the case of a hugely nested commandline input). In expand I insert a null character at the end of the expanded string, so why is it printing past it? If you guys need any more code, or explanations, just ask. Secondly, I put the code in pastebin because there's a ton of it, and in my experience people don't like it when I fill up several pages with code. Thanks.

  Read the article

• Crash when using Cocos2d

  - by ipodfreak0313

  Sorry about the poor question title, it's just that this seems to big for a title. So here's the dirt: I am making a game (obviously) and I want the enemies to shoot (not necessarily at the player). I want the shoot method to be in the Enemies file, so as not to clutter up my HelloWorldLayer.m file even more. Here's what I'm using right now: HelloWorldLayer.m -(void)addEnemy:(BigAndStrongEnemy *)enemy { enemy = nil; if((arc4random() % 4) == 3) { enemy = [BigAndStrongEnemy enemy]; } else { enemy = [SmallAndFastEnemy enemy]; } if(buffDude.position.y > character.position.y || buffDude.position.y < (character.position.y + 10)) { } int rand = arc4random() % 320; if((arc4random() % 2 == 1)) { [enemy setPosition:ccp(0,rand)]; }else{ [enemy setPosition:ccp(480,rand)]; } [self animateEnemy:enemy]; [self addChild:enemy]; } -(void)animateEnemy:(BigAndStrongEnemy *)enemy2 { float randX = arc4random() % 480; float randY = arc4random() % 320; int rand = arc4random() % 320; CGPoint moveToPoint = CGPointMake(randX, (randY - rand)); [enemies addObject:enemy2]; action = [CCSequence actions: [CCMoveBy actionWithDuration:1 position:ccpMult(ccpNormalize(ccpSub(moveToPoint, enemy2.position)), 75)], [CCMoveBy actionWithDuration:3 position:ccp(buffDude.position.x,buffDude.position.y)], nil]; CCCallFuncO *a = [CCCallFuncO actionWithTarget:self selector:(@selector(shoot:)) object:enemy2]; CCSequence *s = [CCSequence actions:action,a, nil]; CCRepeatForever *repeat = [CCRepeatForever actionWithAction:s]; [enemy2 runAction:repeat]; } And here's the Shoot info from the Enemies class: Enemies.m: -(void)shoot:(id)sender { self = (BigAndStrongEnemy *)sender; [self shoot]; } -(void)spriteMoveFinished:(id)sender { CCSprite *b = (CCSprite *)sender; [self removeChild:b cleanup:YES]; } -(void)shoot { self = [CCSprite spriteWithFile:@"bigAndStrongEnemy.gif"]; CCSprite *b = [CCSprite spriteWithFile:@"bullet.gif"]; b.position = ccp(self.position.x,self.position.y); b.tag = 2; [self addChild:b]; [bullets addObject:b]; CGSize winSize = [[CCDirector sharedDirector] winSize]; CGPoint point = CGPointMake((winSize.width - (winSize.width - self.position.x)),0); [b runAction:[CCSequence actions: [CCMoveBy actionWithDuration:0.5 position:point], [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)], nil]]; } Every time the 3 seconds goes by, the app crashes, and goes to the breakpoint in the CCCallFuncO file. I haven't touched it, is the thing. I am completely confused. Any help is greatly appreciated.

  Read the article

• How to get lookahead symbol when constructing LR(1) NFA for parser?

  - by greenoldman

  I am reading an explanation (awesome "Parsing Techniques" by D.Grune and C.J.H.Jacobs; p.292 in the 2nd edition) about how to construct an LR(1) parser, and I am at the stage of building the initial NFA. What I don't understand is how to get/compute a lookahead symbol. Here is the example from the book, the grammar: S -> E E -> E - T E -> T T -> ( E ) T -> n n is terminal. The "weird" transitions for me are is the sequence: 1) S -> . E eof 2) E -> . E - T eof 3) E -> . E - T - 4) E -> E . - T - 5) E -> E - . T - (Note: In the above table, the state numbers are in front and the lookahead symbol is at the end.) What puzzles me is that transition from (4) to (5) means reading - token, right? So how is it that - is still a lookahead symbol and even more important why is it that eof is no longer a lookahead symbol? After all in an input such as n - n eof there is only one - symbol. My naive thinking tells me (5) should be written as: 5) E -> E - . T - eof And another thing -- n is terminal. Why it is not used at all as a lookahead symbol? I mean -- we expect to see - or (, it is ok, but lack of n means we are sure it won't appear in input? Update: after more reading I am only more confused ;-) I.e. what is really a lookahead? Because I see such state as (p.292, 2nd column, 2nd row): E -> E . - T eof Lookahead says eof but the incoming input says -. Isn't it a contradiction? And it is not only in this book.

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >