Search Results

Search found 6100 results on 244 pages for 'power consumption'.

Page 154/244 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• Ubuntu 9.10 freezes when HDMI port is connected

  - by Felipe Hummel

  Hi, I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

  Read the article

• spurious hardware memory 'errors' on hp dl380 g5's being generated

  - by friedchicken

  Hi All, i've got 2 new HP dl380g5 servers running HP's esxi4 patched to 219382. they have both been patched up to the latest hp firmware levels (firmware cd 8.7) both are running 32gb (4 x 8gb sticks) both servers are showing the same symptoms - the memory lights come on for two (random) dimms on the front of the server and the health led turns red. sometimes the server stays up and running with no problems. othertimes the server locks dead and only a power reset can bring it back. there is nothing showing in the ilo logs and nothing within the vmware hardware monitoring. the memory has been replaced i've got other customers that have been running dl380g5's with out any issues on esx3.5 - this is our first vsphere deployment with them. these are meant to go live soon so any advice would be great. thanks in advance.

  Read the article

• How to set Laptop Brightness in Gnome and /proc on Thinkpad W510?

  - by hakre

  I can set the brightness of my laptop screen already via /proc. I can read and change the value. Now I've set the value to 33 and then I went into gnome power management and enabled the option that it should reduce the backlight brightness being on battery. That works, the screen gets darker. If I now read out the current setting from /proc it still says it's 33. So I assume that there is another node in /proc to be used to control the brightness. The node I use so far is: /proc/acpi/video/VID/LCD0/brightness I'm using the nouveau driver. With the nvida driver the brightness can not be controlled.

  Read the article

• Streaming audio to headless linux box

  - by Ralph

  I have a dual boot (Win 7 + Ubuntu) PC connected via wifi with my music collection on a local HDD. I usually use Rhythmbox on Ubuntu or Winamp on Windows to listen to my music but I'll change if I have to. I also have a Raspberry Pi (low power PC running Debian) in the living room that is usually headless and connected via ethernet. The Raspberry Pi is also connected to my living room speakers via an amp. I would like to be able to stream music from my PC over the network to the linux raspberry pi. What software can I use to do this? Some sort of audio client\server?

  Read the article

• One bigger Virtual Machine distributed across many Nodes [on hold]

  - by flyer

  I just setup virtual machines on one hardware with Vagrant (this is just a test environment, not production!). I want to use a Puppet to configure them and next try to setup OpenStack. I am not sure If I am understanding how this should look at the end. Is it possible to have below architecture with OpenStack after all where I will run one Virtual Machine with Linux? ------------------------------- | VM | ------------------------------- | NOVA | NOVA | NOVA | ------------------------------- | OpenStack | ------------------------------- | Node | Node | Node | ------------------------------- (In my environment Nodes are just virtual machines, but my question concerns separate Hardware nodes) After some comments... Is it a language barrier, or? This is only my 'virtual environment'. If we imagine this virtual machines are a separate Nodes (e.g. every has 4 cores) the OpenStack is still the same, right? Can I run one Virtual Machine across many Nodes with OpenStack? Is it possible to aggregate the computation power of separate machines in one virtual distributed operating system?

  Read the article

• Using VLC to Unicast High Definition Webcam over local gigabit LAN with low/zero delay

  - by Robin Day

  We're setting up a webcam "window" between two offices in the same buildilng. The two PC's are connected to the same gigabit switch. We're using VLC to stream the webcam over HTTP using the following commands. vlc dshow:// :dshow-caching="0" :dshow-size="640x480" :sout=#transcode{vcodec=h264,vb=0,scale=0}:http{mux=ffmpeg{mux=flv},dst=:8080/} :no-sout-rtp-sap :no-sout-standard-sap :ttl=1 :sout-keep vlc http://192.168.0.1:8080 :http-caching="0" Even with the caching set to zero, the delay in the image is a good 2-3 seconds. The CPU usage of each pc is also maxed. I'm guessing it's the transcoding that's causing much of the delay. Can anyone give me some changes to these command lines that will reduce the transcoding power, or send the webcam over a different protocol, or anything that will reduce the delay of the cameras? Bandwidth is not an issue at all as the pc's can be connected to a dedicated switch/vlan if required.

  Read the article

• automated printouts from a wireless printer

  - by Piotr

  I have a wireless printer which is always on, and an always on fanless linux server. Looking at the mprinter project on Kickstarter I started to wonder if there is an app somewhere in the internet already that will allow to prepare an automated daily printout based on some settings. things to be printed could include - weather forecast for my locations, todo`s scheduled for that day, a "quote of a day" or "word of the day", stats from google analytics for my site, and many more ... I would set a printout at 6:15 every work day so its on my printer when I am already up, having a coffee. anyone knows something that can be used for such purpose? While I know this can be done by combining the power of TeX, cron and a script language to manage the dynamic part of the PDF I believe this is a use case someone has already addressed.

  Read the article

• What type of amazon instance should I use and do I need auto scaling and load balancing?

  - by Navetz

  Hi I am looking to release a website that will initially have large amounts of uploads from users. The first will be 65GB and the rest will probably be close to 1TB. They could happen simultaneously. My question is what type of amazon server instance would be best for this? The website is just being released so the traffic wont be very high. I have been using a micro instance for development but it is time to launch and I need more power. Should I use auto scaling and a load balancer to increase the number of instances when I need it or Will a small or medium instance do the trick? If I do use auto scaling and load balancing how do I handle things like sessions and the database/file lookups? Does one instance become the primary instance and the rest become clones?

  Read the article

• Open source report framework

  - by Tiax

  I'm looking for a open source report framework for statistics. A more detailed explanation is: We have a number of tests running on different servers collecting data (for example, login time) every 5min. What we need is a framework that collects this data (or exposes web services for us to push the data into the framework) and presents it in form of graphs and so on. Does anyone know of a framework that's easy to use out of the box but has the power to grow? If you know what I mean. Thanks in advance!

  Read the article

• How can I disrupt my roommate's BitTorrent?

  - by bob

  We're on a 50 mb/s Comcast connection and our connection right now is coming in under 1.5 mb/s. Our roommate left for a week with BitTorrent running (Azureus client, we think). Our latency is approaching 300 ms. His door is locked up tight, and both his machine and the router for the house are located inside. I've even flipped the power breaker in the house and that barely works for 2 minutes. His laptop keeps on running, and once the cable modem and router come back up and the machine reconnects, the torrents resume in earnest. I've been running nmap and identified his IP on our LAN. Is there anything I can do over the LAN to make his torrents start to fail or slow down?

  Read the article

• maximum memory which malloc can allocate!

  - by Vikas

  I was trying to figure out how much memory I can malloc to maximum extent on my machine (1 Gb RAM 160 Gb HD Windows platform). I read that maximum memory malloc can allocate is limited to physical memory.(on heap) Also when a program exceeds consumption of memory to a certain level, the computer stops working because other applications do not get enough memory that they require. So to confirm,I wrote a small program in C, int main(){ int *p; while(1){ p=(int *)malloc(4); if(!p)break; } } Hoping that there would be a time when memory allocation will fail and loop will be breaked. But my computer hanged as It was an infinite loop. I waited for about an hour and finally I had to forcely shut down my computer. Some questions: Does malloc allocate memory from HD also? What was the reason for above behaviour? Why didn't loop breaked at any point of time.? Why wasn't there any allocation failure?

  Read the article

• Black screen after scheduled resume from sleep

  - by macbirdie

  I have a problem with my two Windows 7 setups at home. Whenever a scheduled task wakes up the machines from sleep, a black screen with a mouse cursor appears. If I move the mouse or press any key, desktop appears. The biggest problem is that during that black screen phase the display, sometimes even the PC too, doesn't go to stand by after a set period of time in power settings. If I get the desktop to show up, standby functions work fine. Display goes blank after a few minutes and as soon as the task doesn't need the PC, it goes back to sleep. It's frustrating that this "feature" is wasting energy and keeps lighting up the pc in the middle of the night for me to find it that way after I wake up. I found a handful of threads on the intertubes about the issue, but there were no answers in any of them. It sometimes happens in my XP machine at work as well.

  Read the article

• Upgrading HP DL185 G5 8LFF, is using a Dell J1520 4-Drop SATA Adapter possible?

  - by jpreed00

  The HP DL185 G5 8LFF model supports 8 3.5" drives and 1 optical drive. However, instead of the optical drive, I'd like to have 2x 2.5" drives instead. The problem is that the PSU has no more SATA power cables (even though the motherboard has 4 additional SATA data ports). The PSU does have a free 10-pin connector and it looks like the J1520 cable from Dell would fit the bill. Link to cable description Does anyone have any experience using these cables? Are they safe? Any other ideas for adding the disks to the server if I don't use the cable? Thanks!

  Read the article

• Why the different coarse threaded screws?

  - by Luke

  I'm seeing more and more of these screws (pictured below), which are almost triangular. I find I can only put them into Power Supplies and PCI(e) cards in cases, but they will break/strip away if I put them into a hard drive or a standoff for a motherboard Notice the triangular shape on it? On the Root Access chat, I started asking, but no concrete answer yet. I don't assume it's a production flaw, as I've seen hundreds and replaced them with the "proper" round screws. It is coarse-threaded, not fine-threaded (i.e. for a DVD drive or floppy drive). What are they for, and why do we need them instead of the regular round ones?

  Read the article

• How do you explain ethernet cable problems to non networking people?

  - by Bryan McLemore

  We've recently been doing a large network migration in our datacenter. We've had a few cables in this start to deliver really bad pings (in excess of 500ms on a LAN) before they could be replaced. The cables we were replacing weren't made the best. They where all hand made and the runs were so short on some of them that the bend radius was definitely too tight. Some of them ran in bundles right in front of the heat exhaust of the power supplies. The cables were running ok until we started pulling the ones surrounding them out. Then a few started having the problem I mentioned above degrading performance and causing reliability issues. I'm trying to figure out the best way to explain this to non networking people. Is there any documentation that people could recommend or other methods?

  Read the article

• Alternatives to static methods on interfaces for enforcing consistency

  - by jayshao

  In Java, I'd like to be able to define marker interfaces, that forced implementations to provide static methods. For example, for simple text-serialization/deserialization I'd like to be able to define an interface that looked something like this: public interface TextTransformable<T>{ public static T fromText(String text); public String toText(); Since interfaces in Java can't contain static methods though (as noted in a number of other posts/threads: here, here, and here this code doesn't work. What I'm looking for however is some reasonable paradigm to express the same intent, namely symmetric methods, one of which is static, and enforced by the compiler. Right now the best we can come up with is some kind of static factory object or generic factory, neither of which is really satisfactory. Note: in our case our primary use-case is we have many, many "value-object" types - enums, or other objects that have a limited number of values, typically carry no state beyond their value, and which we parse/de-parse thousands of time a second, so actually do care about reusing instances (like Float, Integer, etc.) and its impact on memory consumption/g.c. Any thoughts?

  Read the article

• Windows 7: from Geforce 8800 to three monitors?

  - by lance

  I've got a GeForce 8800 that I've quite happy with. It drives my two 23" widescreen displays well. Now I've got a 19" standard display that I want to stick between the two widescreens. My second PCIe 16x slot is unused (as is the PCI slot below that), and I want to add a card to my Win7 x64 system. This 19" display won't be used for gaming, so I don't need anything fancy. Here are two cards I was considering, but I'm wondering if they're bad choices for some reason? If they're both fine choices, which is better and why? Again, I'm needing to power only the 19" standard display with this card, and it won't play games. I just need 1280x1024 in Win7 x64. NVidia: Galaxy 95TFE8HUFEXX GeForce 9500 GT Video Card - 512MB DDR2, PCI Express 2.0 ATI: ASUS EAH4350 SILENT/DI/51 Radeon HD 4350 Video Card - 512MB DDR2, PCI Express 2.0

  Read the article

• Suggestion of device WiFi range in it's spec. Possible?

  - by SeeR

  I have router Draytek Vigor 2100VG at home almost in the center of it. The farthest point at my home is my balcony, ~12m from it. I have constant wifi signal range problems with some of my devices, but not with others. Notebook Lenovo W510 - no problems Nokia Home Music - always on 10m - no problems Sony PS3 - always on 7m - no problems Sony tablet S - problems around 6m Sony PSP - problems around 8m Sony PS Vita - problems around 8m Nokia E63 - problems around 8m I'm curious why my Notebook don't have any problems even on the balcony? I guess it has better hardware or uses more power for transmission. This information is really important when you want to buy new device/computer, so my real question is: Can device wifi range can somehow be found/suggested from official hardware technical specification? If not Is there some web page with wifi range reviews?

  Read the article

• How to increase Remote Desktop resolution?

  - by BugAlert

  I'm using Windows 7 on a PC and connect to it via Remote Desktop Connection for Mac by MS, using a Mac. On the Mac, I have a 27" Display with 2560 x 1440 px resolution. The PC has a high performance graphics card (one of those that needs an additional power supply). Both machines are connected via network cable to a router. So network should be insanely fast. However, the max resolution I can get is 1400 x 1050. The PC just has a old and bad 21" monitor connected to it. How can I increase the resolution to 2560 x 1440 to work fullscreen with the Apple LED Cinema Display via Remote Desktop? Maybe I shouldn't even ask, because I already experience some lag at the low resolution of 1400 x 1050. But I guess this can be resolved as well?

  Read the article

• Samsung TV connected to PC for Powerpoint

  - by Skaughty

  I have a 42" Samsung LCD TV connected to a Dell computer with a PCI Radion 9000 via a 35' VGA cable. It's purpose is to run power point presentations over the TV for our retail store. I have tried every combination of button clicking on the video card options, and everything on the TV, and I still get black bars on the top and bottom of the image. It looks like I am watching a old wide screen movie on a full screen TV. The TV's suggested resolution is 1024x768, and that is what the output is set to. I have tried this with a nVida PCI card as well with the same results.

  Read the article

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• I have problem with pc. Random reboots with post hyper transport sync flood error

  - by user29867

  I have problem with my pc. Random reboots with post "hyper transport sync flood" error. It happens completely random. Most times i watch movie, some times when i play a game, even when i browse internet. My spec are as follow: MB ASUS M4A78-E CPU Phenom II 940 Sapphire Radeon hd4850 Vapor-X RAM OCZ DDR2 PC2-8500 kit 2x2GB PSU CM Real Power M520W CASE CM Centurion 590 Temps of MB, CPU and 4850 are in normal range. MB is hooter, around 60-70°C under load, Radeon 60-65°C under load (playing game for couple hours). CPU dos not past 50-55°C. So i think its not a cooling problem, CM case is pretty good, and have a lots of fans. I try with this memmory: TWIN2X4096-6400C5DHX same problem.

  Read the article

• How can I access my mini-pc (RaspberryPi / MK802 / Mele A1000 / VIA APC) via ethernet/wifi without having Monitor?

  - by sky770

  Soon I will be getting my own mini-PC (RaspberryPi / MK802 / Mele A1000 / VIA APC). But I was wondering whether is there any possibility that I can just power up and access my mini-pc's OS by connecting it to wifi/ethernet link and remotely access it over the LAN without actually needing a monitor (throughout the process?) ? I currently own a laptop and need a download box and later will be getting a HDTV for converting to a HTPC :D So, I don't really own a spare monitor now but I do have an extra keyboard and mouse. Is there exists any linux distro for the same? which I can use to directly fireup my mini-pc and hook it up across my LAN to remotely access through my laptop? Any suggestions appreciated :) Regards, sky770

  Read the article

• Forgot to unmount/eject external hard drive, lost moved files. Mac OS X

  - by balupton

  So I was using my Mac with my external hard drive connected via USB. I moved about 10 GB of data to it (via drag and drop while holding down the Command key to move the files rather than to copy them). They moved to the drive all right, but as I was having some issues and the Finder crashed after the transfer, I was unable to eject the volume and later everything froze so I had to do a hard restart (hold the power button). When I remounted the volume (plugged the external hard drive back in) it no longer had any of the files which I moved onto it. As it was a lot of data, how can I recover these files?

  Read the article

• Windows 7 Pro x64 suffering from insomnia

  - by gemisigo

  My Win 7 Pro x64 is unable to enter sleep mode. Pressing the sleep button results in strange state where the computer starts entering the sleep mode, the display is turned off but then the whole process stops, it does not switch off the hdd, the keyboard still responds to numlock/capslock, but the display does not on anymore. I have to cut power and restart. If I remove everything (wireless mouse, external hdd, usb hub, etc.) it does enter sleep mode, but if there is something left, it does not, though every one of them has "Allow the computer to turn off this device..." checked and "Allow this device to wake the computer" unchecked. Why does it not work? It was working properly in the RC.

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >