Search Results

Search found 4833 results on 194 pages for 'component'.

Page 155/194 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• "previousMode": Controling the Pin Action of a TopComponent

  - by Geertjan

  An excellent thing I learned today is that you, as a developer of a NetBeans module or NetBeans Platform application, can control the pin button. Up until today, whenever I had a TopComponent defined to appear in "rightSlidingSide" mode and then I clicked the "pin" button, as shown here... ...the TopComponent would then find itself pinned in the "explorer" mode. Would make more sense if it would be pinned in the "properties" mode, which is the docked mode closest to the "rightSlidingSide" mode. Not being able to control the "pin" button has been a recurring question (including in my own head) over several years. But the NetBeans Team's window system guru Stan Aubrecht informed me today that a "previousMode" attribute exists in the "tc-ref" file of the TopComponent. Since a few releases, that file is generated via the annotations in the TopComponent. However, "previousMode" is currently not one of the attributes exposed by the @TopComponent.Registration annotation. Therefore, what I did was this: Set "rightSlidingSide" in the "mode" attribute of the @TopComponent.Registration. Build the module. Find the "generated-layer.xml" (in the Files window) and move the layer registration of the TopComponent, including its action and menu item for opening the TopComponent, into my own manual layer within the module. Then remove all the TopComponent annotations from the TopComponent, though you can keep @ConvertAsProperties and @Messages. Then add the "previousMode" attribute, as highlighted below, into my own layer file, i.e., within the tags copied from the "generated-layer.xml": <folder name="Modes"> <folder name="rightSlidingSide"> <file name="ComparatorTopComponent.wstcref"> <![CDATA[<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE tc-ref PUBLIC "-//NetBeans//DTD Top Component in Mode Properties 2.0//EN" "http://www.netbeans.org/dtds/tc-ref2_0.dtd"> <tc-ref version="2.0"> <tc-id id="ComparatorTopComponent"/> <state opened="false"/> <previousMode name="properties" index="0" /> </tc-ref> ]]> </file> </folder> </folder> Now when you run the application and pin the specific TopComponent defined above, i.e., in the above case, named "ComparatorTopComponent", you will find it is pinned into the "properties" mode! That's pretty cool and if you agree, then you're a pretty cool NetBeans Platform developer, and I'd love to find out more about the application/s you're creating on the NetBeans Platform! Meanwhile, I'm going to create an issue for exposing the "previousMode" attribute in the @TopComponent.Registration annotation.

  Read the article

• ArchBeat Link-o-Rama Top 10 for October 2012

  - by Bob Rhubart

  The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for October 2012. OAM/OVD JVM Tuning | @FusionSecExpert Vinay from the Oracle Fusion Middleware Architecture Group (known as the A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic – when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." -- Irving Wladawsky-Berger Eventually, 90% of tech budgets will be outside IT departments | ZDNet Another interesting post from ZDNet blogger Joe McKendrick about changing roles in IT. ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI," reports Oracle ACE Director Andrejus Baranovskis. Podcast: Are You Future Proof? - Part 2 In Part 2, practicing architects and Oracle ACE Directors Ron Batra (AT&T), Basheer Khan (Innowave Technology), and Ronald van Luttikhuizen (Vennster) discuss re-tooling one’s skill set to reflect changes in enterprise IT, including the knowledge to steer stakeholders around the hype to what's truly valuable. ADF Mobile Custom Javascript — iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. Oracle Solaris 11.1 update focuses on database integration, cloud | Mark Fontecchio TechTarget editor Mark Fontecchio reports on the recent Oracle Solaris 11.1 release, with comments from IDC's Al Gillen. Architects Matter: Making sense of the people who make sense of enterprise IT Why do architects matter? Oracle Enterprise Architect Eric Stephens suggests that you ask yourself this question the next time you take the elevator to the Oracle offices on the 45th floor of the Willis Tower in Chicago, Illinois (or any other skyscraper, for that matter). If you had to take the stairs to get to those offices, who would you blame? "You get the picture," he says. "Architecture is essential for any necessarily complex structure, be it a building or an enterprise." (Read the article) Thought for the Day "I will contend that conceptual integrity is the most important consideration in system design. It is better to have a system omit certain anomalous features and improvements, but to reflect one set of design ideas, than to have one that contains many good but independent and uncoordinated ideas." — Frederick P. Brooks Source: SoftwareQuotes.com

  Read the article

• Incorrect lighting results with deferred rendering

  - by Lasse

  I am trying to render a light-pass to a texture which I will later apply on the scene. But I seem to calculate the light position wrong. I am working on view-space. In the image above, I am outputting the attenuation of a point light which is currently covering the whole screen. The light is at 0,10,0 position, and I transform it to view-space first: Vector4 pos; Vector4 tmp = new Vector4 (light.Position, 1); // Transform light position for shader Vector4.Transform (ref tmp, ref Camera.ViewMatrix, out pos); shader.SendUniform ("LightViewPosition", ref pos); Now to me that does not look as it should. What I think it should look like is that the white area should be on the center of the scene. The camera is at the corner of the scene, and it seems as if the light would move along with the camera. Here's the fragment shader code: void main(){ // default black color vec3 color = vec3(0); // Pixel coordinates on screen without depth vec2 PixelCoordinates = gl_FragCoord.xy / ScreenSize; // Get pixel position using depth from texture vec4 depthtexel = texture( DepthTexture, PixelCoordinates ); float depthSample = unpack_depth(depthtexel); // Get pixel coordinates on camera-space by multiplying the // coordinate on screen-space by inverse projection matrix vec4 world = (ImP * RemapMatrix * vec4(PixelCoordinates, depthSample, 1.0)); // Undo the perspective calculations vec3 pixelPosition = (world.xyz / world.w) * 3; // How far the light should reach from it's point of origin float lightReach = LightColor.a / 2; // Vector in between light and pixel vec3 lightDir = (LightViewPosition.xyz - pixelPosition); float lightDistance = length(lightDir); vec3 lightDirN = normalize(lightDir); // Discard pixels too far from light source //if(lightReach < lightDistance) discard; // Get normal from texture vec3 normal = normalize((texture( NormalTexture, PixelCoordinates ).xyz * 2) - 1); // Half vector between the light direction and eye, used for specular component vec3 halfVector = normalize(lightDirN + normalize(-pixelPosition)); // Dot product of normal and light direction float NdotL = dot(normal, lightDirN); float attenuation = pow(lightReach / lightDistance, LightFalloff); // If pixel is lit by the light if(NdotL > 0) { // I have moved stuff from here to above so I can debug them. // Diffuse light color color += LightColor.rgb * NdotL * attenuation; // Specular light color color += LightColor.xyz * pow(max(dot(halfVector, normal), 0.0), 4.0) * attenuation; } RT0 = vec4(color, 1); //RT0 = vec4(pixelPosition, 1); //RT0 = vec4(depthSample, depthSample, depthSample, 1); //RT0 = vec4(NdotL, NdotL, NdotL, 1); RT0 = vec4(attenuation, attenuation, attenuation, 1); //RT0 = vec4(lightReach, lightReach, lightReach, 1); //RT0 = depthtexel; //RT0 = 100 / vec4(lightDistance, lightDistance, lightDistance, 1); //RT0 = vec4(lightDirN, 1); //RT0 = vec4(halfVector, 1); //RT0 = vec4(LightColor.xyz,1); //RT0 = vec4(LightViewPosition.xyz/100, 1); //RT0 = vec4(LightPosition.xyz, 1); //RT0 = vec4(normal,1); } What am I doing wrong here?

  Read the article

• Parsing T-SQL – The easy way

  - by Dave Ballantyne

  Every once in a while, I hit an issue that would require me to interrogate/parse some T-SQL code.  Normally, I would shy away from this and attempt to solve the problem in some other way.  I have written parsers before in the the past using LEX and YACC, and as much fun and awesomeness that path is,  I couldnt justify the time it would take. However, this week I have been faced with just such an issue and at the back of my mind I can remember reading through the SQLServer 2012 feature pack and seeing something called “Microsoft SQL Server 2012 Transact-SQL Language Service “.  This is described there as : “The SQL Server Transact-SQL Language Service is a component based on the .NET Framework which provides parsing validation and IntelliSense services for Transact-SQL for SQL Server 2012, SQL Server 2008 R2, and SQL Server 2008. “ Sounds just what I was after.  Documentation is very scant on this so dont take what follows as best practice or best use, just a practice and a use. Knowing what I was sort of looking for something, I found the relevant assembly in the gac which is the simply named ,’Microsoft.SqlServer.Management.SqlParser’. Even knowing that you wont find much in terms of documentation if you do a web-search, but you will find the MSDN documentation that list the members and methods etc… The “scanner”  class sounded the most appropriate for my needs as that is described as “Scans Transact-SQL searching for individual units of code or tokens.”. After a bit of poking, around the code i ended up with was something like [System.Reflection.Assembly]::LoadWithPartialName("Microsoft.SqlServer.Management.SqlParser") | Out-Null $ParseOptions = New-Object Microsoft.SqlServer.Management.SqlParser.Parser.ParseOptions $ParseOptions.BatchSeparator = 'GO' $Parser = new-object Microsoft.SqlServer.Management.SqlParser.Parser.Scanner($ParseOptions) $Sql = "Create Procedure MyProc as Select top(10) * from dbo.Table" $Parser.SetSource($Sql,0) $Token=[Microsoft.SqlServer.Management.SqlParser.Parser.Tokens]::TOKEN_SET $Start =0 $End = 0 $State =0 $IsEndOfBatch = $false $IsMatched = $false $IsExecAutoParamHelp = $false while(($Token = $Parser.GetNext([ref]$State ,[ref]$Start, [ref]$End, [ref]$IsMatched, [ref]$IsExecAutoParamHelp ))-ne [Microsoft.SqlServer.Management.SqlParser.Parser.Tokens]::EOF) { try{ ($TokenPrs =[Microsoft.SqlServer.Management.SqlParser.Parser.Tokens]$Token) | Out-Null $TokenPrs $Sql.Substring($Start,($end-$Start)+1) }catch{ $TokenPrs = $null } } As you can see , the $Sql variable holds the sql to be parsed , that is pushed into the $Parser object using SetSource,  and then we will use GetNext until the EOF token is returned.  GetNext will also return the Start and End character positions within the source string of the parsed text. This script’s output is : TOKEN_CREATE Create TOKEN_PROCEDURE Procedure TOKEN_ID MyProc TOKEN_AS as TOKEN_SELECT Select TOKEN_TOP top TOKEN_INTEGER 10 TOKEN_FROM from TOKEN_ID dbo TOKEN_TABLE Table note that the ‘(‘, ‘)’  and ‘*’ characters have returned a token type that is not present in the Microsoft.SqlServer.Management.SqlParser.Parser.Tokens Enum that has caused an error which has been caught in the catch block.  Fun, Fun ,Fun , Simple T-SQL Parsing.  Hope this helps someone in the same position,  let me know how you get on.

  Read the article

• The Connected Company: WebCenter Portal - Feedback - Analytics and Polls

  - by Michael Snow

  Evernote Export body, td { }Guest Post by: Mitchell Palski, Staff Sales Consultant The importance of connecting peers has been widely recognized and socialized as a critical component of employee intranets. Organizations are striving to provide mediums for sharing knowledge and improving awareness across their enterprise. Indirectly, the socialization of your enterprise should lead to cost savings and improved product/service quality. However, many times the direct effects of connecting an organization’s leadership with its employees are overlooked. Oracle WebCenter Portal can help you bridge that gap by gathering implicit and explicit feedback. Implicit Feedback Through Usage Analytics Analytics allows administrators to track and analyze WebCenter Portal traffic and usage. Analytics provides the following basic functionality: Usage Tracking Metrics: Analytics collects and reports metrics of common WebCenter Portal functions, including community and portlet traffic. Behavior Tracking: Analytics can be used to analyze WebCenter Portal metrics to determine usage patterns, such as page visit duration and usage over time. User Profile Correlation: Analytics can be used to correlate metric information with user profile information. Usage tracking reports can be viewed and filtered by user profile data such as country, company or title. Usage analytics help measure how users interact with website content – allowing your IT staff and business analysts to make informed decisions when planning development for your next intranet enhancement. For example: If users are not accessing your Announcements page and missing critical information that they need to be aware of, you may elect to use graphical links on the home page to direct more users to that page. As a result, the number of employee help-requests to HR decreases. If users are not accessing your News page to read recent articles, you may elect to stop spending as much time updating the page with new stories and cut costs in your communications department. You notice that there is a high volume of users accessing the Employee Dashboard page so your organization decides to continue making personalization enhancements to the page and investing in the Portal tool that most users are accessing. Usage analytics aren’t necessarily a new concept in the IT industry. What sets WebCenter Portal Analytics apart is: Reports are tailored for WebCenter specific tools Report can be easily added to a page as simple as a drag-and-drop Explicit Feedback Through Polls WebCenter Portal users can create, edit, take, and analyze online polls. With polls, you can survey your audience (such as their opinions and their experience level), check whether they can recall important information, and gather feedback and metrics. How many times have you been involved in a requirements discussion and someone has asked a question similar to “Well how do you know that no one likes our home page?” and the response is “Everyone says they hate it! That’s all anyone complains about.” No one has any measurable, quantifiable metric to gauge user satisfaction. Analytics measure usage, but your organization also needs to measure the quality of your portal as defined by the actual people that use it. With that information, your leadership can make informed decisions that will not only match usage patterns but also relate to employees on a personal level. The end result is a connection between employees and leadership that gives everyone in the organization a sense of ownership of their Portal rather than the feeling of development decisions being segregated to leadership only. Polls can be created and edited through the Poll Manager: Polls and View Poll Results can easily be added to a page through drag-and-drop. What did we learn? Being a “connected” company doesn’t just mean helping employees connect with each other horizontally across your enterprise. It also means connecting those employees to the decisions that affect their everyday activities. Through WebCenter Portal Usage Analytics and Polls, any decision that is made to remove a Portal page, update a Portal page, or develop new Portal functionality, can be justified by quantifiable metrics. Instead of fielding complaints and hearing that your employees don’t have a voice, give those employees a voice and listen!

  Read the article

• Implementing Service Level Agreements in Enterprise Manager 12c for Oracle Packaged Applications

  - by Anand Akela

  Contributed by Eunjoo Lee, Product Manager, Oracle Enterprise Manager. Service Level Management, or SLM, is a key tool in the proactive management of any Oracle Packaged Application (e.g., E-Business Suite, Siebel, PeopleSoft, JD Edwards E1, Fusion Apps, etc.). The benefits of SLM are that administrators can utilize representative Application transactions, which are constantly and automatically running behind the scenes, to verify that all of the key application and technology components of an Application are available and performing to expectations. A single transaction can verify the availability and performance of the underlying Application Tech Stack in a much more efficient manner than by monitoring the same underlying targets individually. In this article, we’ll be demonstrating SLM using Siebel Applications, but the same tools and processes apply to any of the Package Applications mentioned above. In this demonstration, we will log into the Siebel Application, navigate to the Contacts View, update a contact phone record, and then log-out. This transaction exposes availability and performance metrics of multiple Siebel Servers, multiple Components and Component Groups, and the Siebel Database - in a single unified manner. We can then monitor and manage these transactions like any other target in EM 12c, including placing pro-active alerts on them if the transaction is either unavailable or is not performing to required levels. The first step in the SLM process is recording the Siebel transaction. The following screenwatch demonstrates how to record Siebel transaction using an EM tool called “OpenScript”. A completed recording is called a “Synthetic Transaction”. The second step in the SLM process is uploading the Synthetic Transaction into EM 12c, and creating Generic Service Tests. We can create a Generic Service Test to execute our synthetic transactions at regular intervals to evaluate the performance of various business flows. As these transactions are running periodically, it is possible to monitor the performance of the Siebel Application by evaluating the performance of the synthetic transactions. The process of creating a Generic Service Test is detailed in the next screenwatch. EM 12c provides a guided workflow for all of the key creation steps, including configuring the Service Test, uploading of the Synthetic Test, determining the frequency of the Service Test, establishing beacons, and selecting performance and usage metrics, just to name a few. The third and final step in the SLM process is the creation of Service Level Agreements (SLA). Service Level Agreements allow Administrators to utilize the previously created Service Tests to specify expected service levels for Application availability, performance, and usage. SLAs can be created for different time periods and for different Service Tests. This last screenwatch demonstrates the process of creating an SLA, as well as highlights the Dashboards and Reports that Administrators can use to monitor Service Test results. Hopefully, this article provides you with a good start point for creating Service Level Agreements for your E-Business Suite, Siebel, PeopleSoft, JD Edwards E1, or Fusion Applications. Enterprise Manager Cloud Control 12c, with the Application Management Suites, represents a quick and easy way to implement Service Level Management capabilities at customer sites. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Google+ |  Newsletter

  Read the article

• Issues glVertexAttribPointer last 2 parameters?

  - by NoobScratcher

  Introduction Hello I will start out by explaining my setup, showing samples as I go along explaining the situation. I'm using these tools: OpenGL 3.3 GLSL 330 C++ Problem The problem is when I render the wavefront obj 3d model it gives a very weird visual glitch the model was supposed to be a square but instead its a triangluated mess with parts of the vertexes pointing in a stretched direction in massive amounts towards the bottom left side of the frustum.... Explanation: I'm using std::vectors to store my wavefront .obj model data using sscanf to get the floating point values into the structure members x,y,z and store them into the Points structure variable p; int index = IndexAssigner(1, 1); ifstream file (list[index].c_str() ); points.push_back(Point()); Point p; int face[4]; while (!file.eof() ) { char modelbuffer[10000]; file.getline(modelbuffer, 10000); switch(modelbuffer[0]) { case 'v' : sscanf(modelbuffer, "v %f %f %f", &p.x, &p.y, &p.z); points.push_back(p); break; case 'f': sscanf(modelbuffer, "f %d %d %d %d", face, face+1, face+2, face+3 ); faces.push_back(face[0]); faces.push_back(face[1]); faces.push_back(face[2]); faces.push_back(face[3]); } //Turn on FileReader aka "RENDER CODE" FileReader = true; } then I render the Points vector using the .data() member of std::vectors to the frustum. Other declarations: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); Vector declarations: struct Point {float x, y , z; }; std::vector<int>faces; std::vector<Point>points; Render code: glGenBuffers(1, &vertexbuffer); glGenTextures(1, &ModelTexture); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBindTexture(GL_TEXTURE_3D, ModelTexture); glTexImage2D(GL_TEXTURE_2D, 0,GL_RGBA, ModelSurface->w, ModelSurface->h, 0, GL_BGR, GL_UNSIGNED_BYTE, ModelSurface->pixels); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glBufferData(GL_ARRAY_BUFFER, sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); glEnableVertexAttribArray(3); //Translation Process GLfloat TranslationMatrix[] = { 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 0.0, 0.0, 0.0, 0.0, 1.0, 1.0, 0.0, 0.0, 0.0, 1.0 }; //Send Translation Matrix up to the vertex shader glUniformMatrix4fv(translation, 1, TRUE, TranslationMatrix); glDrawElements( GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data()); I tried looking at what was causing this and went through every function every parameter ,etc looked at the man pages. Then found out that it could be my glVertexAttribPointer. Here are the man pages for glVertexAttribPointer http://www.opengl.org/sdk/docs/man/xhtml/glVertexAttribPointer.xml The last 2 parameters is my problem How do I write those 2 last parameters do I try putting the data from Points into it?. glVertexAttribPointer(3, 3, GL_FLOAT, GL_FALSE,num_bytes ,points.data()); How does it work with vectors? Is it fast?* if you can not be bothered too look at the man pages here is the scripts coming from the man pages directly. Stride Specifies the byte offset between consecutive generic vertex attributes. If stride is 0, the generic vertex attributes are understood to be tightly packed in the array. The initial value is 0. Pointer Specifies a pointer to the first component of the first generic vertex attribute in the array. The initial value is 0. If you want my full source - http://ideone.com/fPfkg Thanks Again if you do read this.

  Read the article

• Web Services Example - Part 1: Declarative

  - by Denis T

  In this edition of the ADF Mobile blog we'll tackle part 1 of our Web Service examples. In this posting we'll take a look at using a declarative SOAP Web Service. Getting the sample code: Just click here to download a zip of the entire project. You can unzip it and load it into JDeveloper and deploy it either to iOS or Android. Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed. Defining our Web Service: First off, we should mention that this sample code is using a public web service provided free by CDYNE Corporation that provides weather forecasts by zipcode. Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. Let's take a look at the web service.  We created this by using the "Web Service Data Control" from the New Gallery and using this link to this wsdl:  "http://wsf.cdyne.com/WeatherWS/Weather.asmx?WSDL"   This web service has several methods but we're interested in GetCityForecastByZIP which takes a single string parameter for the zipcode and the second method, GetWeatherInformation that enumerates all possible forecast descriptions and associated image URLs.  The latter we'll use in the next edition but we included it here for completeness. Defing the Application: After adding a feature to the adfmf-feature.xml file, we added a taskflow to host the application flow.  This comprises of a home screen with a list with items for each method in the web service, "Forecast by Zip" and "Weather Info".  In this application we've also decided to hide the navigation bar since there is only one feature in the application. Forecast by Zip: The "Forecast By ZIP" option first presents the user with a screen where they can enter a zipcode and when the "Search" button is tapped, it executes the GetCityForecastByZIP method.  This is done by binding an Action binding to that method. The easiest way to accomplish this is to just drag & drop the method from the Data Control palette to the AMX page and drop it as a button and let the framework hook it up for you.  There is an inputText component on the page that is bound to a pageFlowScope variable called "zip".  This is used as the parameter to the Action binding when it is executed.  Because the actionListener attribute of the commandButton executes the Web Service each time, we ensure that the method is invoked every time the button is clicked. Weather Info: Unlike the previous method, this time instead of explictly executing the web service method we are using deferred invocation.  What this means is that we will bind to the results of the method and the framework will execute the method when it the data is required to be rendered.  We do this by simply doing a drag & drop of the results of the GetWeatherInformation to the AMX page.  When the page is rendered and the bindings are resolved the framework invokes the method.  This executes the method only when it is needed and fills the Data Control provider.  Because we never re-execute the method, you can click from Home to Weather Info and back many times and the web service is only ever invoked once. Issues and Possible Improvements: One thing you will quickly realize with this example is that the error handling is done by the framework for you. For simple examples this is fine but for real applications you'll want to customize these error messages.  With the declarative invocation of web services, this is difficult.  This is one aspect we'll address in the second installment of the web service examples where we will show you how to do programmatic invocation which allows you better error handling. Another issue you will notice with this example is that we can enumerate the weather information but there isn't an easy way to use that information to show the corresponding description and image as part of the forecast results.  We'll show you how to do this in the next example.

  Read the article

• Introduction to WebCenter Personalization: &ldquo;The Conductor&rdquo;

  - by Steve Pepper

  There are some new faces in the town of WebCenter with the latest 11g PS3 release.  A new component has introduced itself as "Oracle WebCenter Personalization", a.k.a WCP, to simplify delivery of a personalized experience and content to end users.  This posting reviews one of the primary components within WCP: "The Conductor". The Conductor: This ain't just an ordinary cloud... One of the founding principals behind WebCenter Personalization was to provide an open client-side API that remains independent of the technology invoking it, in addition to independence from the architecture running it.  The Conductor delivers this, and much, much more. The Conductor is the engine behind WebCenter Personalization that allows flow-based documents, called "Scenarios", to be managed and executed on the server-side through a well published and RESTful api.      The Conductor also supports an extensible model for custom provider integration that can be easily invoked within a Scenario to promote seamless integration with existing business assets. Introducing the Scenario Conductor Scenarios are declarative offline-authored documents using the custom Personalization JDeveloper bundle included with WebCenter.  A Scenario contains one (or more) statements that can: Create variables that are scoped to the current execution context Iterate over collections, or loop until a specific condition is met Execute one or more statements when a condition is met Invoke other scenarios that exist within the same namespace Invoke a data provider that integrates with custom applications Once a variable is assigned within the Scenario's execution context, it can be referenced anywhere within the same Scenario using the common Expression Language syntax used in J2EE web containers. Scenarios are then published and tested to the Integrated WebLogic Server domain, or published remotely to other domains running WebCenter Personalization. Various Client-side Models The Conductor server API is built upon RESTful services that support a wide variety of clients able to communicate over HTTP.  The Conductor supports the following client-side models: REST:  Popular browser-based languages can be used to manage and execute Conductor Scenarios.  There are other public methods to retrieve configured provider metadata that can be used by custom applications. The Conductor currently supports XML and JSON for it's API syntax. Java: WebCenter Personalization delivers a robust and light-weight java client with the popular Jersey framework as it's foundation.  It has never been easier to write a remote java client to manage remote RESTful services. Expression Language (EL): Allow the results of Scenario execution to control your user interface or embed personalized content using the session-scoped managed bean.  The EL client can also be used in straight JSP pages with minimal configuration. Extensible Provider Framework The Conductor supports a pluggable provider framework for integrating custom code with Scenario execution.  There are two types of providers supported by the Conductor: Function Provider: Function Providers are simple java annotated classes with static methods that are meant to be served as utilities.  Some common uses would include: object creation or instantiation, data transformation, and the like.  Function Providers can be invoked using the common EL syntax from variable assignments, conditions, and loops. For example:  ${myUtilityClass:doStuff(arg1,arg2))} If you are familiar with EL Functions, Function Providers are based on the same concept. Data Provider: Like Function Providers, Data Providers are annotated java classes, but they must adhere to a much more strict object model.  Data Providers have access to a wealth of Conductor services, such as: Access to namespace-scoped configuration API that can be managed by Oracle Enterprise Manager, Scenario execution context for expression resolution, and more.  Oracle ships with three out-of-the-box data providers that supports integration with: Standardized Content Servers(CMIS),  Federated Profile Properties through the Properties Service, and WebCenter Activity Graph. Useful References If you are looking to immediately get started writing your own application using WebCenter Personalization Services, you will find the following references helpful in getting you on your way: Personalizing WebCenter Applications Authoring Personalized Scenarios in JDeveloper Using Personalization APIs Externally Implementing and Calling Function Providers Implementing and Calling Data Providers

  Read the article

• Drawing random smooth lines contained in a square [migrated]

  - by Doug Mercer

  I'm trying to write a matlab function that creates random, smooth trajectories in a square of finite side length. Here is my current attempt at such a procedure: function [] = drawroutes( SideLength, v, t) %DRAWROUTES Summary of this function goes here % Detailed explanation goes here %Some parameters intended to help help keep the particles in the box RandAccel=.01; ConservAccel=0; speedlimit=.1; G=10^(-8); % %Initialize Matrices Ax=zeros(v,10*t); Ay=Ax; vx=Ax; vy=Ax; x=Ax; y=Ax; sx=zeros(v,1); sy=zeros(v,1); % %Define initial position in square x(:,1)=SideLength*.15*ones(v,1)+(SideLength*.7)*rand(v,1); y(:,1)=SideLength*.15*ones(v,1)+(SideLength*.7)*rand(v,1); % for i=2:10*t %Measure minimum particle distance component wise from boundary %for each vehicle BorderGravX=[abs(SideLength*ones(v,1)-x(:,i-1)),abs(x(:,i-1))]'; BorderGravY=[abs(SideLength*ones(v,1)-y(:,i-1)),abs(y(:,i-1))]'; rx=min(BorderGravX)'; ry=min(BorderGravY)'; % %Set the sign of the repulsive force for k=1:v if x(k,i)<.5*SideLength sx(k)=1; else sx(k)=-1; end if y(k,i)<.5*SideLength sy(k)=1; else sy(k)=-1; end end % %Calculate Acceleration w/ random "nudge" and repulive force Ax(:,i)=ConservAccel*Ax(:,i-1)+RandAccel*(rand(v,1)-.5*ones(v,1))+sx*G./rx.^2; Ay(:,i)=ConservAccel*Ay(:,i-1)+RandAccel*(rand(v,1)-.5*ones(v,1))+sy*G./ry.^2; % %Ad hoc method of trying to slow down particles from jumping outside of %feasible region for h=1:v if abs(vx(h,i-1)+Ax(h,i))<speedlimit vx(h,i)=vx(h,i-1)+Ax(h,i); elseif (vx(h,i-1)+Ax(h,i))<-speedlimit vx(h,i)=-speedlimit; else vx(h,i)=speedlimit; end end for h=1:v if abs(vy(h,i-1)+Ay(h,i))<speedlimit vy(h,i)=vy(h,i-1)+Ay(h,i); elseif (vy(h,i-1)+Ay(h,i))<-speedlimit vy(h,i)=-speedlimit; else vy(h,i)=speedlimit; end end % %Update position x(:,i)=x(:,i-1)+(vx(:,i-1)+vx(:,i))/2; y(:,i)=y(:,i-1)+(vy(:,i-1)+vy(:,1))/2; % end %Plot position clf; hold on; axis([-100,SideLength+100,-100,SideLength+100]); cc=hsv(v); for j=1:v plot(x(j,1),y(j,1),'ko') plot(x(j,:),y(j,:),'color',cc(j,:)) end hold off; % end My original plan was to place particles within a square, and move them around by allowing their acceleration in the x and y direction to be governed by a uniformly distributed random variable. To keep the particles within the square, I tried to create a repulsive force that would push the particles away from the boundaries of the square. In practice, the particles tend to leave the desired "feasible" region after a relatively small number of time steps (say, 1000)." I'd love to hear your suggestions on either modifying my existing code or considering the problem from another perspective. When reading the code, please don't feel the need to get hung up on any of the ad hoc parameters at the very beginning of the script. They seem to help, but I don't believe any beside the "G" constant should truly be necessary to make this system work. Here is an example of the current output: Many of the vehicles have found their way outside of the desired square region, [0,400] X [0,400].

  Read the article

• Monitoring Windows Azure Service Bus Endpoint with BizTalk 360?

  - by Michael Stephenson

  I'm currently working with a customer who is undergoing an initiative to expose some of their line of business applications to external partners and SAAS applications and as part of this we have been looking at using the Windows Azure Service Bus. For the first part of the project we were focused on some synchronous request response scenarios where an external application would use the Service Bus relay functionality to get data from some internal applications. When we were looking at the operational monitoring side of the solution it was obvious that although most of the normal server monitoring capabilities would be required for the on premise components we would have to look at new approaches to validate that the operation of the service from outside of the organization was working as expected. A number of months ago one of my colleagues Elton Stoneman wrote about an approach I have introduced with a number of clients in the past where we implement a diagnostics service in each service component we build. This service would allow us to make a call which would flex some of the working parts of the system to prove it was working within any SLA. This approach is discussed on the following article: http://geekswithblogs.net/EltonStoneman/archive/2011/12/12/the-value-of-a-diagnostics-service.aspx In our solution we wanted to take the same approach but we had to consider that the service clients were external to the service. We also had to consider that by going through Windows Azure Service Bus it's not that easy to make most of your standard monitoring solutions just give you an easy way to do this. In a previous article I have described how you can use BizTalk 360 to monitor things using a custom extension to the Web Endpoint Manager and I felt that we could use this approach to provide an excellent way to monitor our service bus endpoint. The previous article is available on the following link: http://geekswithblogs.net/michaelstephenson/archive/2012/09/12/150696.aspx   The Monitoring Solution BizTalk 360 currently has an easy way to hook up the endpoint manager to a url which it will then call and if a successful response is returned it then considers the endpoint to be in a healthy state. We would take advantage of this by creating an ASP.net web page which would be called by BizTalk 360 and behind this page we would implement the functionality to call the diagnostics service on our Service Bus endpoint. The ASP.net page could include logic to work out how to handle the response from the diagnostics service. For example if the overall result of the diagnostics service was successful but the call to the diagnostics service was longer than a certain amount of time then we could return an error and indicate the service is taking too long. The following diagram illustrates the monitoring pattern.   The diagnostics service which is hosted in the line of business application allows us to ping a simple message through the Azure Service Bus relay to the WCF services in the LOB application and we they get a response back indicating that the service is working fine. To implement this I used the exact same approach I described in my previous post to create a custom web page which calls the diagnostics service and then it would return an HTTP response code which would depend on the error condition returned or a 200 if it was successful. One of the limitations of this approach is that the competing consumer pattern for listening to messages from service bus means that you cannot guarantee which server would process your diagnostics check message but with BizTalk 360 you could simply add multiple endpoint checks so that it could access the individual on-premise web servers directly to ensure that each server is working fine and then check that messages can also be processed through the cloud. Conclusion It took me about 15 minutes to get a proof of concept of this up and running which was able to monitor our web services which had been exposed via Windows Azure Service Bus. I was then able to inherit all of the monitoring benefits of BizTalk 360 to provide an enterprise class monitoring solution for our cloud enabled API.

  Read the article

• Incentivizing Work with Development Teams

  - by MarkPearl

  Recently I saw someone on twitter asking about incentives and if anyone had past experience with incentivizing work. I promised to respond with some of the experiences I have had in the past so here goes... **Disclaimer** - these are my experiences with incentives, generally in software development - in some other industries this may not be applicable – this is also my thinking at this point in time, with more experience my opinion may change. Incentivize at the level that you want people to group at If you are wanting to promote a team mentality, incentivize teams. If you want to promote an individual mentality, incentivize individuals. There is nothing worse than mixing this up. Some organizations put a lot of effort in establishing teams and team mentalities but reward individuals. This has a counter effect on the resources they have put towards establishing a team mentality. In the software projects that I work with we want promote cross functional teams that collaborate. Personally, if I was on a team and knew that there was an opportunity to work on a critical component of the system, and that by doing so I would get a bigger bonus, then I would be hesitant to include other people in solving that problem. Thus, I would hinder the teams efforts in being cross functional and reduce collaboration levels. Does that mean everyone in the team should get an even share of an incentive? In most situations I would say yes - even though this may feel counter-intuitive. I have heard arguments put forward that if “person x contributed more than person Y then they should be rewarded more” – This may sound controversial but I would rather treat people how would you like them to perform, not where they currently are at. To add to this approach, if someone is free loading, you bet your bottom dollar that the team is going to make this a lot more transparent if they feel that individual is going to be rewarded at the same level that everyone else is. Bad incentives promote destructive work If you are going to incentivize people, pick you incentives very carefully. I had an experience once with a sales person who was told they would get a bonus provided that they met an ordering target with a particular supplier. What did this person do? They sold everything at cost for the next month or so. They reached the goal, but the company didn't gain anything from it. It was a bad incentive. Expect the same with development teams, if you incentivize zero bug levels, you will get zero code committed to the solution. If you incentivize lines of code, you will get many many lines of bad code. Is there such a thing as a good incentives? Monetary wise, I am not sure there is. I would much rather encourage organizations to pay their people what they are worth upfront. I would also advise against paying money to teams as an incentive or even a bonus or reward for reaching a milestone. Rather have a breakaway for the team that promotes team building as a reward if they reach a milestone than pay them more money. I would also advise against making the incentive the reason for them to reach the milestone. If this becomes the norm it promotes people to begin to only do their job if there is an incentive at the end of the line. This is not a behaviour one wants to encourage. If the team or individual is in the right mind-set, they should not work any harder than they are right now with normal pay.

  Read the article

• Cloud Adoption Challenges

  - by Herve Roggero

  Originally posted on: http://geekswithblogs.net/hroggero/archive/2013/11/07/cloud-adoption-challenges.aspxWhile cloud computing makes sense for most organizations and countless projects, I have seen customers significantly struggle with cloud adoption challenges. This blog post is not an attempt to provide a generic assessment of cloud adoption; rather it is an account of personal experiences in the field, some of which may or may not apply to your organization. Cloud First, Burst? In the rush to cloud adoption some companies have made the decision to redesign their core system with a cloud first approach. However a cloud first approach means that the system may not work anymore on-premises after it has been redesigned, specifically if the system depends on Platform as a Service (PaaS) components (such as Azure Tables). While PaaS makes sense when your company is in a position to adopt the cloud exclusively, it can be difficult to leverage with systems that need to work in different clouds or on-premises. As a result, some companies are starting to rethink their cloud strategy by designing for on-premises first, and modify only the necessary components to burst when needed in the cloud. This generally means that the components need to work equally well in any environment, which requires leveraging Infrastructure as a Service (IaaS) or additional investments for PaaS applications, or both.  What’s the Problem? Although most companies can benefit from cloud computing, not all of them can clearly identify a business reason for doing so other than in very generic terms. I heard many companies claim “it’s cheaper”, or “it allows us to scale”, without any specific metric or clear strategy behind the adoption decision. Other companies have a very clear strategy behind cloud adoption and can precisely articulate business benefits, such as “we have a 500% increase in traffic twice a year, so we need to burst in the cloud to avoid doubling our network and server capacity”. Understanding the problem being solved through by adopting cloud computing can significantly help organizations determine the optimum path and timeline to adoption. Performance or Scalability? I stopped counting the number of times I heard “the cloud doesn’t scale; our database runs faster on a laptop”.  While performance and scalability are related concepts, they are nonetheless different in nature. Performance is a measure of response time under a given load (meaning with a specific number of users), while scalability is the performance curve over various loads. For example one system could see great performance with 100 users, but timeout with 1,000 users, in which case the system wouldn’t scale. However another system could have average performance with 100 users, but display the exact same performance with 1,000,000 users, in which case the system would scale. Understanding that cloud computing does not usually provide high performance, but instead provides the tools necessary to build a scalable system (usually using PaaS services such as queuing and data federation), is fundamental to proper cloud adoption. Uptime? Last but not least, you may want to read the Service Level Agreement of your cloud provider in detail if you haven’t done so. If you are expecting 99.99% uptime annually you may be in for a surprise. Depending on the component being used, there may be no associated SLA at all! Other components may be restarted at any time, or services may experience failover conditions weekly ( or more) based on current overall conditions of the cloud service provider, most of which are outside of your control. As a result, for PaaS cloud environments (and to a certain extent some IaaS systems), applications need to assume failure and gracefully retry to be successful in the cloud in order to provide service continuity to end users. About Herve Roggero Herve Roggero, Windows Azure MVP, is the founder of Blue Syntax Consulting (http://www.bluesyntax.net). Herve's experience includes software development, architecture, database administration and senior management with both global corporations and startup companies. Herve holds multiple certifications, including an MCDBA, MCSE, MCSD. He also holds a Master's degree in Business Administration from Indiana University. Herve is the co-author of "PRO SQL Azure" and “PRO SQL Server 2012 Practices” from Apress, a PluralSight author, and runs the Azure Florida Association.

  Read the article

• Oracle Excellence Award

  - by Hartmut Wiese

  CALL FOR NOMINATIONS 2014 Oracle Excellence Award: Sustainability Innovation Is your organization using an Oracle product to help with a sustainability initiative while reducing costs? Saving energy? Saving gas? Saving paper? For example, you may use Oracle’s Agile Product Lifecycle Management to design more eco-friendly products, Oracle Transportation Management to reduce fleet emissions, Oracle Exadata Database Machine to decrease power and cooling needs while increasing database performance, Oracle Business Intelligence to measure environmental impacts, or one of many other Oracle products. Your organization may be eligible for the 2014 Oracle Excellence Award: Sustainability Innovation. Submit a nomination form located here by Friday June 20 if your company is using any Oracle product to take an environmental lead as well as to reduce costs and improve business efficiencies by using green business practices. These awards will be presented during Oracle OpenWorld 2014 (September 28-October 2) in San Francisco.  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 About the Award • Winners will be selected from the customer and/or partner nominations. Either a customer, their partner, or Oracle representative can submit the nomination form on behalf of the customer.• There is a nomination form here to discuss your use of Oracle products and how they have helped your sustainability efforts and reduced costs. • Winners will be selected based on the extent of the environmental impact they have had as well as the business efficiencies they have achieved through their combined use of Oracle products. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Nomination Eligibility • Your company uses at least one component of Oracle products, whether it's the Oracle database, business applications, Fusion Middleware, or Sun servers/storage. • This solution should be in production or in active development. • Nomination deadline: Friday June 20, 2014. Benefits to Award Winners • Award presented to winners during Oracle OpenWorld by Jeff Henley, Oracle Chairman of the Board • Free Oracle OpenWorld registration pass for each winning customer • 2014 Oracle Excellence Award: Sustainability Innovation award logo for inclusion on your own website &/or press release • Possible placement in Oracle Profit Magazine &/or Oracle Magazine • ‘Enable the Eco-Enterprise’ podcast opportunity See last year's winners here Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 ______________________________________________________________________________________ Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Questions? Send an email to: [email protected] Follow Oracle’s Sustainability Solutions on Twitter, LinkedIn, YouTube, and the Sustainability Matters blog Web page with award details:  http://www.oracle.com/us/products/applications/green/call-for-nominations-185050.html  

  Read the article

• Introducing the Metro User Interface on Windows 2012

  - by andywe

  Although I am a big fan of using PowerShell to do many of my server operations, that aspect is well covered by those far more knowledgeable than I, and there is vast information around the web already on that. The new Metro interface, and getting around both Windows 8 and Windows Server 2012 though is relatively new, even for those whop ran the previews. What is this? A blank Desktop!   Where did the start button go? Well, it is still there...sort of. It is hidden, and acts like an auto hidden component that appear only when the mouse is hovered over the lower left corner of the screen. Those familiar with Gnome or OSX can relate this to the "Hot Corners" functions. To get to the start button, hover your mouse in the very left corner of the task bar. Let it sit there a moment, and a small blue square with colored tiles in it called start will appear. Click it. I clicked it and now I have all the tiles..What is this?   Welcome to the Metro interface. This is a much more modern look, and although at first seems weird and cumbersome, I have actually found that it is a bit more extensible, allowing greater organization and customization than the older explorer desktop. If you look closely, you'll see each box represents either a program, or program group. First, a few basics about using the start view. First and foremost, a right mouse click will bring up a bar on the bottom, with an icon towards the right. Notice it is titled “All Apps”. An even easier way in many places is to hover your mouse in the exact opposite corner, in the upper right. A sidebar will open and expose what used to be a widget bar (remember Vista?), and there are options for Search, Start, and Settings.   Ok Great, but where is everything? It’s all there…Click the All Apps icon.   Look better? Notice the scroll bar at the bottom. Move it right..your desktop is sized to your content..so you can have a smaller, or larger amount of programs exposed. Each icon can be secondary clicked (right mouse click for most of us, and an options bar at the bottom, rather than the old small context menu, is opened with some very familiar options.   Notice the top of the Windows Explorer window has some new features. You still have your right mouse click functions, but since the shortcuts for these items already exist..just copy them. There are many ways, but here is a long way to show you more of the interface. 1. Right mouse click a program icon, and select the Open File Location option. 2. Trusty file manager opens…but if you look closely up at top edge of the window, you’ll see a nifty enhancement. An orange colored box that is titled Shortcut Tools and another lavender box Title Application tools. Each of these adds options at the top of the file manager window to make selection easy. Of course, you can still secondary click an item in the listing window too. 3. Click shortcut tools, right click your app shortcut and copy it. Then simply paste it into the desktop outside the File Explorer window Also note some of the newer features. The large icons up top below the menu that has many common operations. The options change as you select each menu item. Well, that’s it for this installment. I hope this helps you out.

  Read the article

• SSMS Tools Pack 2.7 is released. New website, improved licensing and features.

  - by Mladen Prajdic

  New website Nice, isn't it? Cleaner, simpler, better looking and more modern. If you have any suggestions for further improvements I'd be glad to hear them. Simpler licensing With SSMS tools Pack 2.7 the licensing is finally where it should be. It is now based on the activate/deactivate model. This way you can move a license from machine to machine with simple deactivation on one and reactivation on another machine. Much better, no? Because of very good feedback I have added an option for 6 machines and lowered the 4 machines option to 3 machines. This should make it much simpler for you to choose the right option for yourself. Improved features Version 2.5.3 was already extremely stable and 2.7 continues with that tradition. Because of that I could fully focus on features and why 3.0 will rock even more that 2.7! ;) In version 2.7 I have addressed quite a few improvements you were requesting for a while now. SQL History This is probably the biggest time saver out there, therefore it's only fair it gets a few important updates. If you have an existing .sql file opened, the Window Content History now saves your code to that existing file and also makes a backup in the SQL History log default location. Search is still done through the SQL History log but the Tab Sessions Restore opens your existing .sql file. This way you don't have to remember to save your existing files by yourself anymore. A bug when you couldn't search properly if you copied the log files to a new location was fixed. Unfortunately this removed the option to filter a search with the time component. The smallest search interval is now one day. The SSMS Tools Pack now remembers the visibility of the Current Window History window when you exit SSMS. SQL Snippets You can now set the position of the cursor in your snippets by placing {C} somewhere in your snippet. It's a small improvement but can be a huge time saver since you don't have to move through the snippet to the desired location anymore. Run script on multiple databases Database choices can now be saved with a name and then loaded again next time. You can also choose to run the script in a new window for each chosen database. Search through grid results You can now go previous/next search result with the Prev/Next control inside the search window. This is extremely useful if you have a large resultset. IT saves you the scrolling. CRUD generator Four new variables have been added: |CurrentDate| writes current date in format yyyy-MM-dd to your script |CurrentTime| writes current time in 24h format HH:mm:ss to your script |CurrentWinUser| writes current Windows logged on user to your script |CurrentSqlUser| writes current SQL logged on login to your script This was actually quite a requested feature so if you have any other ideas for extra variables, do let me know. That's about it. I hope you're going to enjoy this version as much as the previous ones. Have fun!

  Read the article

• Windows service - COM class factory error 80070583

  - by jawonlee

  I have a Windows service that periodically scrapes some web pages, using mshtml and HtmlAgilityPack. For this particular C# code snippet: HTMLDocumentClass doc = new HTMLDocumentClass(); doc.write(new object[] { responseFromServer }); doc.close(); I get this error: Retrieving the COM class factory for component with CLSID {25336920-03F9-11CF-8FD0-00AA00686F13} failed due to the following error: 80070583. I tracked down the CLSID in the registry, and it turned out to be mshtml.dll. I also noticed that the version I actually have is version 7.0.6000.17023, and the registry version is listed as Version=7.0.3300.0. The error code 80070583 means "Class does not exist"; interestingly, I've also gotten an error from the same program with error code 80070582, or "Class already exists". What does it all mean? Edit: Since there are no answers, I ended up working around the problem, by ditching MSHTML and using HTML Agility Pack to parse HTML. How do I close this question?

  Read the article

• Custom Checkbox style for WPF

  - by lorddarq

  I would like to skin a wpf default checkbox to something custom. Since it does not really make sense to start off a entirely new control, i'd like to override the Windows Chrome template binding for the Bulletchrome sub component of the checkbox. However I cannot do this like I can with checkboxes for example. tried using something like this to override the default style, but it seems to not compile like this <Style x:Key="cb_BULLETSTYLE" TargetType="{x:Type BulletDecorator}"> <Setter Property="OverridesDefaultStyle" Value="true"/> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type BulletDecorator}"> <Border x:Name="Chrome" SnapsToDevicePixels="true" BorderBrush="{x:Null}" BorderThickness="0"> </Border> <ControlTemplate.Triggers> <Trigger Property="IsMouseOver" Value="True"> <Setter Property="Background" TargetName="Chrome" Value="#FF4C4C4C"/> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter>

  Read the article

• Binding Image.Source to String in WPF ?

  - by Mohammad

  I have below XAML code : <Window x:Class="WpfApplication1.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" DataContext="{Binding RelativeSource={RelativeSource Self}}" WindowStartupLocation="CenterScreen" Title="Window1" Height="300" Width="300"> <Grid> <Image x:Name="TestImage" Source="{Binding Path=ImageSource}" /> </Grid> </Window> Also, there is a method that makes an Image from a Base64 string : Image Base64StringToImage(string base64ImageString) { try { byte[] b; b = Convert.FromBase64String(base64ImageString); MemoryStream ms = new System.IO.MemoryStream(b); System.Drawing.Image img = System.Drawing.Image.FromStream(ms); ////////////////////////////////////////////// //convert System.Drawing.Image to WPF image System.Drawing.Bitmap bmp = new System.Drawing.Bitmap(img); IntPtr hBitmap = bmp.GetHbitmap(); System.Windows.Media.ImageSource imageSource = System.Windows.Interop.Imaging.CreateBitmapSourceFromHBitmap(hBitmap, IntPtr.Zero, Int32Rect.Empty, BitmapSizeOptions.FromEmptyOptions()); Image wpfImage = new Image(); wpfImage.Source = imageSource; wpfImage.Width = wpfImage.Height = 16; ////////////////////////////////////////////// return wpfImage; } catch { Image img1 = new Image(); img1.Source = new BitmapImage(new Uri(@"/passwordManager;component/images/TreeView/empty-bookmark.png", UriKind.Relative)); img1.Width = img1.Height = 16; return img1; } } Now, I'm gonna bind TestImage to the output of Base64StringToImage method. I've used the following way : public string ImageSource { get; set; } ImageSource = Base64StringToImage("iVBORw0KGgoAAAANSUhEUgAAABAAAAAQCAMAAAAoLQ9TAAAABGdBTUEAAK/INwWK6QAAABl0RVh0U29mdHdhcmUAQWRvYmUgSW1hZ2VSZWFkeXHJZTwAAABjUExURXK45////6fT8PX6/bTZ8onE643F7Pf7/pDH7PP5/dns+b7e9MPh9Xq86NHo947G7Hm76NTp+PL4/bHY8ojD67rc85bK7b3e9MTh9dLo97vd8/D3/Hy96Xe76Nfr+H+/6f///1bvXooAAAAhdFJOU///////////////////////////////////////////AJ/B0CEAAACHSURBVHjaXI/ZFoMgEEMzLCqg1q37Yv//KxvAlh7zMuQeyAS8d8I2z8PT/AMDShWQfCYJHL0FmlcXSQTGi7NNLSMwR2BQaXE1IfAguPFx5UQmeqwEHSfviz7w0BIMyU86khBDZ8DLfWHOGPJahe66MKe/fIupXKst1VXxW/VgT/3utz99BBgA4P0So6hyl+QAAAAASUVORK5CYIII").Source.ToString(); but nothing happen. How can I fix it ? BTW, I'm dead sure that the base64 string is correct

  Read the article

• Flash AS3: (VideoEvent.COMPLETE, completePlay) - listener is triggered before video is completed

  - by Tevi

  Hello, I have a flash video using the standard FLV Playback component that comes with Flash. I'm using ActionScript 3 to modify the appearance and set up an event listener. I've set it up to go to a new URL using "externalInterface" when the video completes play. The URL is set in a variable using SWFObject. On only a few instances (3 people out of 50 - tested using Amazon Turk), people reported being taken directly to the new url, before the video even started playing. It's difficult to repeat the issue, but it did happen to me once. It doesn't have anything to do with cache, since it has been reported on people going to the url for the first time. Here's the url to the video: http://www.partstown.com/is-bin/INTERSHOP.enfinity/WFS/Reedy-PartsTown-Site/en_US/-/USD/ViewStaticPage-UnFramed?page=tourthetown Here's the code: import flash.external.*; import fl.video.*; var myVideo:FLVPlayback = new FLVPlayback(); var theUrl:String = this.loaderInfo.parameters.urlName; var theScript:String = this.loaderInfo.parameters.scriptName; myVideo.source = this.loaderInfo.parameters.videoPath;//"partstown.flv"; myVideo.skin = this.loaderInfo.parameters.skinPath;//"SkinUnderPlayStopSeekMuteVol.swf" myVideo.skinBackgroundColor = 0xAEBEFB; myVideo.skinBackgroundAlpha = 0.5; myVideo.width = 939; myVideo.height = 660; myVideo.addEventListener(VideoEvent.COMPLETE, completePlay); function completePlay(e:VideoEvent):void { myVideo.alpha=0.2; ExternalInterface.call(theScript); } addChild(myVideo); Why would the listener be triggered before the event complete? How can I fix it? Thanks!

  Read the article

• Managing Dependency Hell with WiX and C#

  - by Tom the Junglist

  We are on the eve of product launch, and at the last minute I am being bombarded with crash reports that appear to be related to our installer, which is a WiX3 project with separate outputs for x86 and x64 builds. These have been an ongoing problem that I always thought were fixed, only to find out that they were still lurking. The product itself is a collection of binaries that communicate with each other via .Net remoting, including a Windows Service and a small COM component that is loaded as an addon in another app. The service runs as SYSTEM, the COM piece runs in a low-rights context, while the other pieces run in normal user contexts. Other pieces include an third-party COM object library DLL and a shared DLL with the .net Remoting interfaces. I've observed flat-out weird behavior with MSI, particularly on version upgrades. Between MS' anal strong-name implementation (specifically, the exact version check before loading a given assembly), a documented WiX/MSI bug that sees critical files erased on upgrades (essentially, if a file in the upgrade MSI has the same version number as the existing install, that file is deleted), and having to work around Wow64 virtualization (x86 MSI can only write to registry/HD locations via Wow64, yet x64 MSIs cannot run on x86 computers...), I am about ready to trash the whole thing and port it over to a different install system. What I am looking for on tips + tricks, techniques, or suggestions on how to properly do things so that I am not fighting with Windows Installer's twisted sense of logic. I am tired of fighting with WiX/MSI/Windows Installer. All it needs to do is place files and registry keys where I tell it to, upgrade them when appropriate, and don't delete anything until the user uninstalls. Instead, dependencies are deleted willy-nilly, bringing up a whole bunch of uncatchable exceptions (can't wrap a try{} block around function declarations) and GPF'ing the whole app. I am particularly interested in 'best practices' and examples regarding shared and dependency DLLs, and any tips on making sure if a file needs to go to GAC, that it actually goes to the GAC and stays there until it is appropriate to remove it. Thanks! Tom

  Read the article

• Installing into the GAC with WiX 3.0

  - by Jeff Yates

  I have a DLL that I would like to install into the Global Assembly Cache so that it can be referenced from multiple locations. I have a File declaration with the Assembly attribute set to ".net" but when the installation tries to install the DLL into the GAC, I get the following error (I have tided it up a bit to make it more readable): MSI (s) (58:38) [19:14:31:031]: Product: MyProductName 1.01 -- Error 1935. An error occurred during the installation of assembly  'Compass,   version="1.0.0.0",   culture="neutral",   publicKeyToken="392B26B760D48103",   processorArchitecture="MSIL"'. Please refer to Help and Support for more information. HRESULT: 0x80131043. assembly interface:       IAssemblyCacheItem, function:             Commit, component: {53AEE63B-F356-4D4F-8D61-EB0640A6E160} I have hunted around to find out what this means and the error relates to FUSION_E_UNEXPECTED_MODULE_FOUND. This link also includes this information: /// When installing multi-file assemblies into the GAC, the hash of each module is /// checked against the hash of that file stored in the manifest. If the /// hash of one of the files in the multi-file assembly does not match what is recorded /// in the manifest, FUSION_E_UNEXPECTED_MODULE_FOUND will be returned. /// The name of the error, and the text description of it, are somewhat confusing. /// The reason this error code is described this way is that the internally, /// Fusion/CLR implements installation of assemblies in the GAC, by installing /// multiple "streams" that are individually committed. /// Each stream has its hash computed, and all the hashes found /// are compared against the hashes in the manifest, at the end of the installation. /// Hence, a file hash mismatch appears as if an "unexpected" module was found. Unfortunately, this doesn't make much sense to me and I don't see how it relates to my assembly, which isn't fancy or complex from my perspective (it's just a regular .NET 3.5 class library and the current installation test is occurring on my development machine, which is a valid target environment for my project - 32-bit Windows XP SP3). Can anyone shed some light on why I might be getting this error and how I might hope to fix it?

  Read the article

• Can't step into stored procedure on remote SQL Server 2008

  - by abatishchev

  I have a domain installed on virtual Windows Server 2008 x64. SQL Server 2008 Express x64 is running in Windows Server 2008 x64 and client on Windows 7 RTM x86. Both are into the domain. I'm starting both Visual Studio 2008 and SQL Server Management Studio 2008 under domain admin user. This account is a member of group sysadmin on SQL Server. Server has firewall exceptions for both TCP and UDP on ports 135-139 and 1433-1434. Visual Studio 2008 Remote debugger services is started on server and Domain Admins group is allowed to debug, When I'm starting debugging of a query in SMS I'm getting this error: Failed to start debugger Error HRESULT E_FAIL has been returned from a call to a COM component. (mscorlib) Program Location: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.SqlServer.Management.UI.VSIntegration.DebugSession.DebugCallbacks.OnSqlInitializeDebuggingEvent(ISqlInitializeDebuggingEvent sqlInitializeDebuggingEvent) at Microsoft.SqlServer.Management.UI.VSIntegration.DebugSession.DebugCallbacks.Microsoft.VisualStudio.Debugger.Interop.IDebugEventCallback2.Event(IDebugEngine2 debugEngine, IDebugProcess2 debugProcess, IDebugProgram2 debugProgram, IDebugThread2 debugThread, IDebugEvent2 debugEvent, Guid& riidEvent, UInt32 attribute) and Unable to access the SQL Server debugging interface. The Visual Studio debugger cannot connect to the remote computer. A firewall may be preventing communication via DCOM to the remote computer. Please see Help for assistance. and Unable to start program MSSSQL://server.mydomain.local/master/sys/=0 And when stepping-in into a stored procedure using VS I'm getting the first one and this: Exception from HRESULT: 0x89710016 What have I do?

  Read the article

• WPF Button Storyboard with an image for MouseOver

  - by Vinjamuri

  I have the following xaml for changing the image for WPF button when mouse is on the button. It give below error. Any help is appreciated... 'System.Windows.Media.Animation.DoubleAnimation' animation object cannot be used to animate property 'Source' because it is of incompatible type 'System.Windows.Media.ImageSource'. <Style TargetType="{x:Type local:ButtonControl}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:ButtonControl}"> <Grid> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="CommonStates"> <VisualState x:Name="MouseOver"> <Storyboard> <DoubleAnimation Storyboard.TargetName="img" Storyboard.TargetProperty="Source" To="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=MouseOverImage}" /> </Storyboard> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <Border> <Image x:Name="img" Source="pack://application:,,,/Recipe_06_13;component/Resources/normal.bmp" /> </Border> </Grid> </ControlTemplate> </Setter.Value> </Setter> </Style>

  Read the article

• How to use Android's CacheManager?

  - by punnie

  I'm currently developing an Android application that fetches images using http requests. It would be quite swell if I could cache those images in order to improve to performance and bandwidth use. I came across the CacheManager class in the Android reference, but I don't really know how to use it, or what it really does. I already scoped through this example, but I need some help understanding it: /core/java/android/webkit/gears/ApacheHttpRequestAndroid.java Also, the reference states: "Network requests are provided to this component and if they can not be resolved by the cache, the HTTP headers are attached, as appropriate, to the request for revalidation of content." I'm not sure what this means or how it would work for me, since CacheManager's getCacheFile accepts only a String URL and a Map containing the headers. Not sure what the attachment mentioned means. An explanation or a simple code example would really do my day. Thanks! Update Here's what I have right now. I am clearly doing it wrong, just don't know where. public static Bitmap getRemoteImage(String imageUrl) { URL aURL = null; URLConnection conn = null; Bitmap bmp = null; CacheResult cache_result = CacheManager.getCacheFile(imageUrl, new HashMap()); if (cache_result == null) { try { aURL = new URL(imageUrl); conn = aURL.openConnection(); conn.connect(); InputStream is = conn.getInputStream(); cache_result = new CacheManager.CacheResult(); copyStream(is, cache_result.getOutputStream()); CacheManager.saveCacheFile(imageUrl, cache_result); } catch (Exception e) { return null; } } bmp = BitmapFactory.decodeStream(cache_result.getInputStream()); return bmp; }

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >