Search Results

Search found 18132 results on 726 pages for 'connection timeout'.

Page 155/726 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• Issues printing through ssh tunnel and port forwarding

  - by simogasp

  I'm having some problems trying to print through a ssh tunnel. I'd like to print from my laptop to a network printer (Toshiba es453, for what matters) which is in a local network. I can reach the local network using a gateway. So far I did the following: ssh -N -L19100:<Printer_IP>:9100 <username>@<ssh_gateway> Basically i just mapped the port 19100 of my laptop directly to the input port of the printer, passing through the gateway. So far, so good. Then, i tried to install on my laptop a new printer with the GUI config tool of ubuntu, so that the new printer is on localhost at port 19100 (as APP Socket/HP Jet Direct) , then I provided the proper driver of the printer. In theory, once the tunnel is open I should be able to print from any program just selecting this printer. Of course, it does not work. :-) The document hangs in the queue with status Processing while in the shell where I set up the tunnel I get these errors on failing opening channels debug1: Local forwarding listening on ::1 port 19100. debug1: channel 0: new [port listener] debug1: Local forwarding listening on 127.0.0.1 port 19100. debug1: channel 1: new [port listener] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 3: new [direct-tcpip] channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44434, nchannels 4 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] channel 3: open failed: connect failed: Connection timed out debug1: channel 3: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44443, nchannels 4 channel 2: open failed: connect failed: Connection timed out debug1: channel 2: free: direct-tcpip: listening port 19100 for 195.220.21.227 port 9100, connect from ::1 port 44493, nchannels 3 debug1: Connection to port 19100 forwarding to 195.220.21.227 port 9100 requested. debug1: channel 2: new [direct-tcpip] As a further debugging test I tried the following. From a machine inside the local network I did a telnet <IP_printer> 9100, got access, wrote some random thing, closed the connection and correctly I got a print of what I had written. So the port and the ip of the printer should be correct. I tried the same from my laptop with the tunnel opened, the telnet succeeded but, again, the printer didn't print anything, getting the usual channel x: open failed: errors. I'm not a great expert on the matter, I just thought that in theory it was possible to do something like that, but maybe there is something that I didn't consider or I did wrong. Any clue? Thanks! Simone [update] As further debugging test, I tried to replicate the procedure from a machine in the local network. From that machine, I did ssh -N -L19100:<IP_printer>:9100 <username>@<ssh_gateway> (note that now the machine, the gateway and the printer are in the same local network) then I tried again the telnet test with telnet localhost 19100, I got access and everything, but I didn't get the print but the usual error channel 2: open failed: connect failed: Connection timed out Maybe I am missing some other connection to be forwarded or maybe this is not allowed by the administrators. Of course, if I connect via ssh tunneling to the local machine from my laptop through the gateway, I can successfully print using the lpr command (from the local machine). But this is what I would like to avoid (yes, I'm lazy...:-), I would like to have a more 'elegant' and transparent way to do that.

  Read the article

• Using GMail's SMTP and IMAP servers in Notification Mailer

  - by Saroja Kandepuneni

  Overview GMail offers free, reliable, popular SMTP and IMAP services, because of which many people are interested to use it. GMail can be used when there are no in-house SMTP/IMAP servers for testing or debugging purposes. This blog explains how to install GMail SSL certificate in Concurrent Tier, testing the connection using a standalone program, running Mailer diagnostics and configuring GMail IMAP and SMTP servers for Workflow Notification Mailer Inbound and Outbound connections. GMail servers configuration SMTP server Host Name  smtp.gmail.com SSL Port  465 TLS/SSL required  Yes User Name  Your full email address (including @gmail.com or @your_domain.com) Password  Your gmail passwor  IMAP server  Host Name imap.gmail.com  SSL Port 993 TLS/SSL Required Yes  User Name  Your full email address (including @gmail.com or @your_domain.com)  Password Your gmail password GMail SSL Certificate Installation The following is the procedure to install the GMail SSL certificate Copy the below GMail SSL certificate to a file eg: gmail.cer -----BEGIN CERTIFICATE-----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-----END CERTIFICATE----- Install the SSL certificate into the default JRE location or any other location using below command Installing into a dfeault JRE location in EBS instance         # keytool -import -trustcacerts -keystore $AF_JRE_TOP/lib/security/cacerts  -storepass changeit -alias gmail-lnx_chainnedcert -file gmail.cer Install into a custom location         # keytool -import -trustcacerts -keystore <customLocation>  -storepass changeit -alias gmail-lnx_chainnedcert -file gmail.cer       <customLocation> -- directory in instance where the certificate need to be installed After running the above command you can see the following response         Trust this certificate? [no]:  yes        Certificate was added to keystore Running Mailer Command Line Diagnostics Run Mailer command line diagnostics from conccurrent tier where Mailer is running, to check the IMAP connection using the below command $AFJVAPRG -classpath $AF_CLASSPATH -Dprotocol=imap -Ddbcfile=$FND_SECURE/$TWO_TASK.dbc -Dserver=imap.gmail.com -Dport=993 -Dssl=Y -Dtruststore=$AF_JRE_TOP/lib/security/cacerts -Daccount=<gmail username> -Dpassword=<password> -Dconnect_timeout=120 -Ddebug=Y -Dlogfile=GmailImapTest.log -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer Run Mailer command line diagnostics from concurrent tier where Mailer is running, to check the SMTP connection using the below command   $AFJVAPRG -classpath $AF_CLASSPATH -Dprotocol=smtp -Ddbcfile=$FND_SECURE/$TWO_TASK.dbc -Dserver=smtp.gmail.com -Dport=465 -Dssl=Y -Dtruststore=$AF_JRE_TOP/lib/security/cacerts -Daccount=<gmail username> -Dpassword=<password> -Dconnect_timeout=120 -Ddebug=Y -Dlogfile=GmailSmtpTest.log -DdebugMailSession=Y oracle.apps.fnd.wf.mailer.Mailer Standalone program to verify the IMAP connection Run the below standalone program from the concurrent tier node where Mailer is running to verify the connection with GMail IMAP server. It connects to the Gmail IMAP server with the given GMail user name and password and lists all the folders that exist in that account. If the Gmail IMAP server is not working for the  Mailer check whether the PROCESSED and DISCARD folders exist for the GMail account, if not create manually by logging into GMail account.Sample program to test GMail IMAP connection  The standalone program can be run as below  $java GmailIMAPTest GmailUsername GMailUserPassword            Standalone program to verify the SMTP connection Run the below standalone program from the concurrent tier node where Mailer is running to verify the connection with GMail SMTP server. It connects to the GMail SMTP server by authenticating with the given user name and password  and sends a test email message to the give recipient user email address. Sample program to test GMail SMTP connection The standalone program can be run as below  $java GmailSMTPTest GmailUsername gMailPassword recipientEmailAddress    Warnings As gmail.com is an external domain, the Mailer concurrent tier should allow the connection with GMail server Please keep in mind when using it for corporate facilities, that the e-mail data would be stored outside the corporate network

  Read the article

• Weird SSIS Configuration Error

  - by Christopher House

  I ran into an interesting SSIS issue that I thought I'd share in hopes that it may save someone from bruising their head after repeatedly banging it on the desk like I did.  I was trying to setup what I believe is referred to as "indirect configuration" in SSIS.  This is where you store your configuration in some repository like a database or a file, then store the location of that repository in an environment variable and use that to configure the connection to your configuration repository.  In my specific situation, I was using a SQL database.  I had this all working, but for reasons I'll not bore you with, I had to move my SSIS development to a new VM last week.  When I got my new VM, I set about creating a new package.  I finished up development on the package and started setting up configuration.  I created an OLE DB connection that pointed to my configuration table then went through the configuration wizard to have the connection string for this connection set through my environment variable.  I then went through the wizard to set another property through a value stored in the configuration table.  When I got to the point where you select the connection, my connection wasn't in the list: As you can see in the screen capture above, the ConfigurationDb connection isn't in the list of available SQL connections in the configuration wizard.  Strange.  I canceled out of the wizard, went to the properties for ConfigurationDb, tested the connection and it was successful.  I went back to the wizard again and this time ConfigurationDb was there.  I completed the wizard then went to test my package.  Unfortunately the package wouldn't run, I got the following error: Unfortunately, googling for this error code didn't help much as none of the results appears related to package configuration.  I did notice that when I went back through the package configuration and tried to edit a previously saved config entry,  I was getting the following error: I checked the connection string I had stored in my environment variable and noticed that indeed, it did not have a provider name.  I didn't recall having included one on my previous VM, but I figured I'd include it just to see what happened.  That made no difference at all.  After a day and a half of trying to figure out what the problem was, I'm pleased to report that through extensive trial and error, I have resolved the error. As it turns out, the person who setup this new VM for me named the server SQLSERVER2008.  This meant my configuration connection string was: Initial Catalog=SSISConfigDb;Data Source=SQLSERVER2008;Integrated Security=SSPI; Just for the heck of it, I tried changing it to: Initial Catalog=SSISConfigDb;Data Source=(local);Integrated Security=SSPI; That did the trick!  As soon as I restarted BIDS, I was able to run the package with no errors at all.  Crazy.  So, the moral of the story is, don't name your server SQLSERVER2008 if you want SSIS configuration to work when using SQL as your config store.

  Read the article

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Cisco VPN Client Behind ASA 5505

  - by fdf33

  I'm trying to get connected to another ASA via Cisco VPN Client. I am behind an ASA 5505 myself and I am tryihng to VPN to a 5510. I get the message: Secure VPN Connection terminated locally by the Client. Reason 412: The remote peer is no longer responding. I can connect to the other ASA if I use a normal cheap Linksys. Here's the version of my ASA: Result of the command: "sh ver" Cisco Adaptive Security Appliance Software Version 8.4(1) Any help would be great. Thanks running-config : Saved : Written by enable_15 at 23:12:32.378 UTC Fri Jul 1 2011 ! ASA Version 8.4(1) ! hostname aaaasa domain-name aaa.local enable password xxxxxxxxxxxxxxx encrypted passwd xxxxxxxxxxxxxxxxxxxx encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.254 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address xxx.xxx.xxx.xxx 255.255.254.0 ! interface Vlan5 no nameif security-level 50 ip address 172.16.0.254 255.255.255.0 ! interface Vlan500 no nameif security-level 100 ip address 10.10.10.1 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! boot system disk0:/asa841-k8.bin ftp mode passive dns domain-lookup inside dns domain-lookup outside dns server-group DefaultDNS name-server 4.2.2.2 domain-name aaa.local same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network A_93.97.168.1 host 93.97.168.1 object network rdp host 192.168.1.2 object network NETWORK_OBJ_192.168.1.0_24 subnet 192.168.1.0 255.255.255.0 access-list 101 extended permit tcp any host 192.168.1.2 eq 3389 access-list 101 extended permit icmp any any echo-reply access-list 101 extended permit icmp any any source-quench access-list 101 extended permit icmp any any time-exceeded access-list 101 extended permit icmp any any unreachable access-list 102 extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1492 ip local pool VPNPool 192.168.2.200-192.168.2.210 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-641.bin no asdm history enable arp timeout 14400 ! object network rdp nat (inside,outside) static interface service tcp 3389 3389 ! nat (inside,outside) after-auto source dynamic any interface access-group 101 in interface outside access-group 102 out interface outside ! router ospf 1 network 192.168.1.0 255.255.255.0 area 0 log-adj-changes ! route outside 0.0.0.0 0.0.0.0 93.97.168.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=ciscoasa proxy-ldc-issuer crl configure crypto ca certificate chain ASDM_TrustPoint0 certificate 8877d64d 30820248 308201b1 a0030201 02020488 77d64d30 0d06092a 864886f7 0d010105 05003036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c301e 170d3131 30353231 30383533 34325a17 0d323130 35313830 38353334 325a3036 3111300f 06035504 03130863 6973636f 61736131 21301f06 092a8648 86f70d01 09021612 63697363 6f617361 2e6e6a64 2e6c6f63 616c3081 9f300d06 092a8648 86f70d01 01010500 03818d00 30818902 818100ea 1aa95141 480e616c efee6816 a96d6511 313b6776 cd3dd57b cd84b4d2 5e108aee 7c980086 4d92e2eb b6c7bf66 4585af0a ccbf153a db9270be c6f5c67b db9dd8d1 2f78d033 3348b056 df4be0da 70e08953 53adf294 9db6c020 597d250f bf448b43 b90179c8 ff0b15d8 744632d9 31c1945f 0b11e258 b4c1d224 692efff4 7b2f5102 03010001 a3633061 300f0603 551d1301 01ff0405 30030101 ff300e06 03551d0f 0101ff04 04030201 86301f06 03551d23 04183016 8014493c 19db183a ab1af9e9 b1e44ad4 2a408b3c 89d1301d 0603551d 0e041604 14493c19 db183aab 1af9e9b1 e44ad42a 408b3c89 d1300d06 092a8648 86f70d01 01050500 03818100 1dd1760a fdd15941 4803fb9a cd6f44a7 2e275854 a1c0fbe1 d19f2cc9 182d43ef a547f854 8df96d15 3ea79c62 cf3fcb1c 5820360b c607dbfc 4de8bb16 19f727e9 b928a085 665816d8 138e4a35 ed610950 7910dd4a 0b1a9dd9 0e26f1c8 b78bc0cc cbf19eb2 4c4c3931 45199ea5 249e3266 661e44fd 7a00d376 dcfc6e4e d43f10b8 quit crypto isakmp nat-traversal 30 crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 prf sha lifetime seconds 86400 crypto ikev2 enable outside client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 ssh 192.168.1.0 255.255.255.0 inside ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.5-192.168.1.36 inside dhcpd dns 4.2.2.2 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics host number-of-rate 3 threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server 82.219.4.31 source outside prefer ssl trust-point ASDM_TrustPoint0 outside webvpn enable outside anyconnect image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 anyconnect profiles AnyConnectVPN_client_profile disk0:/AnyConnectVPN_client_profile.xml anyconnect profiles SSLAnyConnectVPN_client_profile disk0:/SSLAnyConnectVPN_client_profile.xml anyconnect enable tunnel-group-list enable group-policy GroupPolicy_AnyConnectVPN internal group-policy GroupPolicy_AnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client ssl-clientless default-domain value aaa.local webvpn url-list none anyconnect profiles value AnyConnectVPN_client_profile type user group-policy GroupPolicy_SSLAnyConnectVPN internal group-policy GroupPolicy_SSLAnyConnectVPN attributes wins-server none dns-server value 4.2.2.2 vpn-tunnel-protocol ikev2 ssl-client default-domain value aaa.local webvpn anyconnect profiles value SSLAnyConnectVPN_client_profile type user username testuser password xxxxxxxxxxxxxxxxx encrypted privilege 0 username testuser attributes vpn-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLPOL type remote-access tunnel-group SSLPOL general-attributes default-group-policy GroupPolicy_AnyConnectVPN tunnel-group SSLAnyConnectVPN type remote-access tunnel-group SSLAnyConnectVPN general-attributes address-pool VPNPool default-group-policy GroupPolicy_SSLAnyConnectVPN tunnel-group SSLAnyConnectVPN webvpn-attributes group-alias SSLAnyConnectVPN enable ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect ip-options inspect netbios inspect rsh inspect rtsp inspect sip inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect xdmcp ! service-policy global_policy global prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:94a65341aa27d3929d5e92a32ba22120 : end

  Read the article

• Cisco ASA: Allowing and Denying VPN Access based on membership to an AD group

  - by milkandtang

  I have a Cisco ASA 5505 connecting to an Active Directory server for VPN authentication. Usually we'd restrict this to a particular OU, but in this case users which need access are spread across multiple OUs. So, I'd like to use a group to specify which users have remote access. I've created the group and added the users, but I'm having trouble figuring out how to deny users which aren't in that group. Right now, if someone connects they get assigned the correct group policy "companynamera" if they are in that group, so the LDAP mapping is working. However, users who are not in that group still authenticate fine, and their group policy becomes the LDAP path of their first group, i.e. CN=Domain Users,CN=Users,DC=example,DC=com, and then are still allowed access. How do I add a filter so that I can map everything that isn't "companynamera" to no access? Config I'm using (with some stuff such as ACLs and mappings removed, since they are just noise here): gateway# show run : Saved : ASA Version 8.2(1) ! hostname gateway domain-name corp.company-name.com enable password gDZcqZ.aUC9ML0jK encrypted passwd gDZcqZ.aUC9ML0jK encrypted names name 192.168.0.2 dc5 description FTP Server name 192.168.0.5 dc2 description Everything server name 192.168.0.6 dc4 description File Server name 192.168.0.7 ts1 description Light Use Terminal Server name 192.168.0.8 ts2 description Heavy Use Terminal Server name 4.4.4.82 primary-frontier name 5.5.5.26 primary-eschelon name 172.21.18.5 dmz1 description Kerio Mail Server and FTP Server name 4.4.4.84 ts-frontier name 4.4.4.85 vpn-frontier name 5.5.5.28 ts-eschelon name 5.5.5.29 vpn-eschelon name 5.5.5.27 email-eschelon name 4.4.4.83 guest-frontier name 4.4.4.86 email-frontier dns-guard ! interface Vlan1 nameif inside security-level 100 ip address 192.168.0.254 255.255.255.0 ! interface Vlan2 description Frontier FiOS nameif outside security-level 0 ip address primary-frontier 255.255.255.0 ! interface Vlan3 description Eschelon T1 nameif backup security-level 0 ip address primary-eschelon 255.255.255.248 ! interface Vlan4 nameif dmz security-level 50 ip address 172.21.18.254 255.255.255.0 ! interface Vlan5 nameif guest security-level 25 ip address 172.21.19.254 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 switchport access vlan 3 ! interface Ethernet0/2 switchport access vlan 4 ! interface Ethernet0/3 switchport access vlan 5 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone PST -8 clock summer-time PDT recurring dns domain-lookup inside dns server-group DefaultDNS name-server dc2 domain-name corp.company-name.com same-security-traffic permit intra-interface access-list companyname_splitTunnelAcl standard permit 192.168.0.0 255.255.255.0 access-list companyname_splitTunnelAcl standard permit 172.21.18.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.20.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip any 172.21.18.0 255.255.255.0 access-list bypassingnat_dmz extended permit ip 172.21.18.0 255.255.255.0 192.168.0.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 12288 logging buffered warnings logging asdm notifications mtu inside 1500 mtu outside 1500 mtu backup 1500 mtu dmz 1500 mtu guest 1500 ip local pool VPNpool 172.21.20.50-172.21.20.59 mask 255.255.255.0 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 email-frontier global (outside) 3 guest-frontier global (backup) 1 interface global (dmz) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 dc5 255.255.255.255 nat (inside) 1 192.168.0.0 255.255.255.0 nat (dmz) 0 access-list bypassingnat_dmz nat (dmz) 2 dmz1 255.255.255.255 nat (dmz) 1 172.21.18.0 255.255.255.0 access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz route outside 0.0.0.0 0.0.0.0 4.4.4.1 1 track 1 route backup 0.0.0.0 0.0.0.0 5.5.5.25 254 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 ldap attribute-map RemoteAccessMap map-name memberOf IETF-Radius-Class map-value memberOf CN=RemoteAccess,CN=Users,DC=corp,DC=company-name,DC=com companynamera dynamic-access-policy-record DfltAccessPolicy aaa-server ActiveDirectory protocol ldap aaa-server ActiveDirectory (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft aaa-server ADRemoteAccess protocol ldap aaa-server ADRemoteAccess (inside) host dc2 ldap-base-dn dc=corp,dc=company-name,dc=com ldap-scope subtree ldap-login-password * ldap-login-dn cn=administrator,ou=Admins,dc=corp,dc=company-name,dc=com server-type microsoft ldap-attribute-map RemoteAccessMap aaa authentication enable console LOCAL aaa authentication ssh console LOCAL http server enable http 192.168.0.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart sla monitor 123 type echo protocol ipIcmpEcho 4.4.4.1 interface outside num-packets 3 frequency 10 sla monitor schedule 123 life forever start-time now crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 ! track 1 rtr 123 reachability telnet timeout 5 ssh 192.168.0.0 255.255.255.0 inside ssh timeout 5 ssh version 2 console timeout 0 management-access inside dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy companynamera internal group-policy companynamera attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com group-policy companyname internal group-policy companyname attributes wins-server value 192.168.0.5 dns-server value 192.168.0.5 vpn-tunnel-protocol IPSec password-storage enable split-tunnel-policy tunnelspecified split-tunnel-network-list value companyname_splitTunnelAcl default-domain value corp.company-name.com split-dns value corp.company-name.com username admin password IhpSqtN210ZsNaH. encrypted privilege 15 tunnel-group companyname type remote-access tunnel-group companyname general-attributes address-pool VPNpool authentication-server-group ActiveDirectory LOCAL default-group-policy companyname tunnel-group companyname ipsec-attributes pre-shared-key * tunnel-group companynamera type remote-access tunnel-group companynamera general-attributes address-pool VPNpool authentication-server-group ADRemoteAccess LOCAL default-group-policy companynamera tunnel-group companynamera ipsec-attributes pre-shared-key * ! class-map type inspect ftp match-all ftp-inspection-map class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect ftp ftp-inspection-map parameters class ftp-inspection-map policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns migrated_dns_map_1 inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect ils inspect netbios inspect rsh inspect rtsp inspect skinny inspect sqlnet inspect sunrpc inspect tftp inspect sip inspect xdmcp inspect icmp inspect icmp error inspect esmtp inspect pptp ! service-policy global_policy global prompt hostname context Cryptochecksum:487525494a81c8176046fec475d17efe : end gateway# Thanks so much!

  Read the article

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• Why is my Linux box dropping network connection? [closed]

  - by Robo

  I have a Debian server in the form of a Raspberry Pi running Raspian. It has a USB Wi-Fi connection. Sometimes it would not respond when I SSH to it, and would require a reboot. I found something in syslog that may indicate what the problem is, can someone help with what this means? Dec 16 15:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 16:17:01 raspberrypi /USR/SBIN/CRON[2109]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 16:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 17:17:01 raspberrypi /USR/SBIN/CRON[2127]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 17:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 18:17:01 raspberrypi /USR/SBIN/CRON[2142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 18:34:17 raspberrypi wpa_supplicant[1501]: wlan0: WPA: Group rekeying completed with 00:21:29:6c:5c:3d [GTK=CCMP] Dec 16 19:17:01 raspberrypi /USR/SBIN/CRON[2161]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Dec 16 19:31:29 raspberrypi kernel: [16615.391509] ieee80211 phy0: wlan0: No probe response from AP 00:21:29:6c:5c:3d after 500ms, disconnecting. Dec 16 19:31:29 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-DISCONNECTED bssid=00:21:29:6c:5c:3d reason=4 Dec 16 19:31:29 raspberrypi kernel: [16615.416189] cfg80211: Calling CRDA to update world regulatory domain Dec 16 19:31:30 raspberrypi ifplugd(wlan0)[1444]: Link beat lost. Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Executing '/etc/ifplugd/ifplugd.action wlan0 down'. Dec 16 19:31:40 raspberrypi wpa_supplicant[1501]: wlan0: CTRL-EVENT-TERMINATING - signal 15 received Dec 16 19:31:40 raspberrypi ifplugd(wlan0)[1444]: Program executed successfully. Dec 16 19:31:42 raspberrypi ntpd[1928]: Deleting interface #2 wlan0, 192.168.1.10#123, interface stats: received=321, sent=327, dropped=0, active_time=16596 secs Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.6.116.123 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.99.128.34 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 203.118.148.40 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: 202.89.49.65 interface 192.168.1.10 -> (none) Dec 16 19:31:42 raspberrypi ntpd[1928]: peers refreshed

  Read the article

• Why can I view my site over a 3G connection but not through my wifi?

  - by Jonathan

  So, I am sitting in my office with four computers on the same network and internet connection. Two of the computers can visit this particular website. Two of the computer get a message "Google Chrome could not find". I have tried FF and IE also with the same problem. I can view the site 90% of the time on two of the working computers although the site seems slow and sometimes I also get the same errors as the other two computers. I have flushed the DNS, reset the router, tested the site on other peoples computers with success. Is this likely to be a site issue, an ISP issue, a hosting issue? Any advice is greatly appreciated. Here is the ping from the working machine: C:\Users\Jon>ping www.balihaicruises.com Pinging www.balihaicruises.com [208.113.173.102] with 32 bytes of data: Reply from 208.113.173.102: bytes=32 time=331ms TTL=47 Reply from 208.113.173.102: bytes=32 time=327ms TTL=47 Reply from 208.113.173.102: bytes=32 time=326ms TTL=47 Reply from 208.113.173.102: bytes=32 time=329ms TTL=47 Ping statistics for 208.113.173.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 326ms, Maximum = 331ms, Average = 328ms Traceroute: Tracing route to www.balihaicruises.com [208.113.173.102] over a maximum of 30 hops: 1 1 ms 17 ms 3 ms 192.168.1.1 2 42 ms 37 ms 36 ms 180.254.224.1 3 39 ms 47 ms 40 ms 180.252.1.69 4 36 ms 616 ms 57 ms 61.94.115.221 5 84 ms 76 ms 80 ms 180.240.191.98 6 73 ms 80 ms 72 ms 180.240.191.97 7 157 ms 143 ms 116 ms 180.240.190.82 8 115 ms 113 ms 120 ms ae1-123.hkg11.ip4.tinet.net [183.182.80.93] 9 331 ms 332 ms 335 ms xe-3-2-1.was14.ip4.tinet.net [89.149.184.30] 10 327 ms 330 ms 331 ms internap-gw.ip4.tinet.net [77.67.69.254] 11 437 ms 415 ms 350 ms border10.pc2-bbnet2.wdc002.pnap.net [216.52.127.73] 12 322 ms 823 ms 398 ms dreamhost-2.border10.wdc002.pnap.net [216.52.125.74] 13 328 ms 336 ms 326 ms ip-208-113-156-4.dreamhost.com [208.113.156.4] 14 326 ms 328 ms 336 ms ip-208-113-156-14.dreamhost.com [208.113.156.14] 15 327 ms 331 ms 333 ms apache2-udder.crisp.dreamhost.com [208.113.173.102] And then for the machine that doesn't work: C:\Users\Microsoft>ping www.balihaicruises.com Ping request could not find host www.balihaicruises.com. Please check the name and try again. C:\Users\Microsoft>tracert www.balihaicruises.com Unable to resolve target system name www.balihaicruises.com.

  Read the article

• Why can't we reach some (but not all) external web service via VPN connection?

  - by Paul Haldane

  At work (UK university) we use a set of Windows servers running WS2008R2 and RRAS which offer VPN service to students in our accommodation. We do this to associate the network connections with individuals. Before they've connected to the VPN all they can talk to is the stuff thats needed to setup the VPN and a local web site with documentation on how to connect. Medium term we'll probably replace this but it's what we're using at the moment. VPN on the 2008 servers allocates client a private (10.x) address. Access to external sites is through NAT on the campus routers (same as any other directly connected client on a private address). Non-VPN connections aren't seeing this problem. Older servers run WS 2003 and ISA2004. That setup works but has become unreliable under load. Big difference there was that we were allocating non-RFC1918 addresses to the clients (so no NAT required). Behaviour we're seeing is that once connected to the VPN, clients can reach local web sites (that is sites on the campus network) but only some external sites. It seems (but this may be chance) that the sites we can reach are Google ones (including YouTube). We certainly have trouble reaching Microsoft's Office 365 service (which is a pain because that's where mail for most of our students is). One odd bit of behaviour is that clients can fetch (using wget on a Windows 7 client) http://www.oracle.com/ (which gets a 301 redirect) but hangs when asked to fetch http://www.oracle.com/index.html (which is what the first URL redirects to). Access works reliably if we configure clients to use our local web proxies (Squid). My gut tells me that this is likely to be something in the chain dropping replies either based on HTTP inspection or the IP address in the reply. However I'm puzzled about why we're seeing this with the VPN clients. Plan for tomorrow (when I'm back in the office) is to setup a web server on external connection so that we can monitor behaviour at both ends of the conversation (hoping that the problem manifests itself with our test server). Any suggestions for things we should be looking at?

  Read the article

• Spring JMS MQJE001: Completion Code '2', Reason '2042'.

  - by john

  My setup is Spring 3 JMS, MVC + Websphere MQ + Websphere 7 <!-- this is the Message Driven POJO (MDP) --> <bean id="messageListener" class="com.SomeListener" /> <!-- and this is the message listener container --> <bean id="jmsContainer" class="org.springframework.jms.listener.DefaultMessageListenerContainer"> <property name="connectionFactory" ref="xxxCF" /> <property name="destination" ref="someQueue" /> <property name="messageListener" ref="messageListener" /> </bean> When I start up the server, the listener seems to start correctly since it receives the messages that are on the queue as I put them. However, once I run any simple controller/action that doesn't even have anything to do with JMS it gives me the message below over and over... DefaultMessag W org.springframework.jms.listener.DefaultMessageListenerContainer handleListenerSetupFailure Setup of JMS message listener invoker failed for destination 'queue:///ABCDEF.EFF.OUT?persistence=-1' - trying to recover. Cause: MQJMS2008: failed to open MQ queue ''.; nested exception is com.ibm.mq.MQException: MQJE001: Completion Code '2', Reason '2042'. DefaultMessag I org.springframework.jms.listener.DefaultMessageListenerContainer refreshConnectionUntilSuccessful Successfully refreshed JMS Connection ConnectionEve W J2CA0206W: A connection error occurred. To help determine the problem, enable the Diagnose Connection Usage option on the Connection Factory or Data Source. ConnectionEve A J2CA0056I: The Connection Manager received a fatal connection error from the Resource Adapter for resource JMS$XXXQCF$JMSManagedConnection@2. The exception is: javax.jms.JMSException: MQJMS2008: failed to open MQ queue ''. ConnectionEve W J2CA0206W: A connection error occurred. To help determine the problem, enable the Diagnose Connection Usage option on the Connection Factory or Data Source. ConnectionEve A J2CA0056I: The Connection Manager received a fatal connection error from the Resource Adapter for resource jms/XXXQCF. The exception is: javax.jms.JMSException: MQJMS2008: failed to open MQ queue ''. The original listener seems to be still running correctly...but I think the controller is somehow triggering off another connection? Does anyone know what I should check for or what might cause this issue? thanks

  Read the article

• Using RabbitMQ (Java client), is there a way to determine if network connection is closed during con

  - by MItch Branting

  I'm using RabbitMQ on RHEL 5.3 using the Java client. I have 2 nodes (machines). Node1 is consuming messages from a queue on Node2 using the Java helper class QueueingConsumer. QueueingConsumer consumer = new QueueingConsumer(channel); channel.basicConsume("MyQueueOnNode2", noAck, consumer); while (true) { QueueingConsumer.Delivery delivery = consumer.nextDelivery(); ... Process message - delivery.getBody() } If the interface is brought down on Node1 or Node2 (e.g. ifconfig eth1 down), the client (above) never knows the network isn't there anymore. Does RabbitMQ provide some type of configuration on the Java client that can be used to determine if the connection has gone away. Shutting down the RabbitMQ server on Node2 will trigger a ShutdownSignalException, which can be caught and the app can go into a reconnect loop. But bringing down the interface doesn't cause any type of exception to happen, so the code will be waiting forever on consumer.nextDelivery(). I've also tried using the timeout version of this call. e.g. QueueingConsumer consumer = new QueueingConsumer(channel); channel.basicConsume("MyQueueOnNode2", noAck, consumer); int timeout_ms = 30000; while (true) { QueueingConsumer.Delivery delivery = consumer.nextDelivery(timeout_ms); if (delivery == null) { if (channel.isOpen() == false) // Seems to always return true { throw new ShutdownSignalException(); } } else { ... Process message - delivery.getBody() } } but appears that this always returns true (even though the interface is down). I assume registering for the ShutdownListener on the connection will yield the same results, but haven't tried that yet. Is there a way to configure some sort of heartbeat, or do you just have to write custom lease logic (e.g. "I'm here now") in order to get this to work?

  Read the article

• Visual Studio 2010 Hosting :: Connect to MySQL Database from Visual Studio VS2010

  - by mbridge

  So, in order to connect to a MySql database from VS2010 you need to 1. download the latest version of the MySql Connector/NET from http://www.mysql.com/downloads/connector/net/ 2. install the connector (if you have an older version you need to remove it from Control Panel -> Add / Remove Programs) 3. open Visual Studio 2010 4. open Server Explorer Window (View -> Server Explorer) 5. use Connect to Database button 6. in the Choose Data Source windows select MySql Database and press Continue 7. in the Add Connection window - set server name: 127.0.0.1 or localhost for MySql server running on local machine or an IP address for a remote server - username and password - if the the above data is correct and the connection can be made, you have the possibility to select the database If you want to connect to a MySql database from a C# application (Windows or Web) you can use the next sequence: //define the connection reference and initialize it MySql.Data.MySqlClient.MySqlConnection msqlConnection = null; msqlConnection = new MySql.Data.MySqlClient.MySqlConnection(“server=localhost;user id=UserName;Password=UserPassword;database=DatabaseName;persist security info=False”);     //define the command reference MySql.Data.MySqlClient.MySqlCommand msqlCommand = new MySql.Data.MySqlClient.MySqlCommand();     //define the connection used by the command object msqlCommand.Connection = this.msqlConnection;     //define the command text msqlCommand.CommandText = "SELECT * FROM TestTable;"; try {     //open the connection     this.msqlConnection.Open();     //use a DataReader to process each record     MySql.Data.MySqlClient.MySqlDataReader msqlReader = msqlCommand.ExecuteReader();     while (msqlReader.Read())     {         //do something with each record     } } catch (Exception er) {     //do something with the exception } finally {     //always close the connection     this.msqlConnection.Close(); }.

  Read the article

• Kernel, dpkg, sudo and apt-get corrupted

  - by TECH4JESUS

  Here are some errors that I am getting: 1) A proper configuration for Firestarter was not found. If you are running Firestarter from the directory you built it in, run make install-data-local to install a configuration, or simply make install to install the whole program. Firestarter will now close. root@p:/# firestarter ** (firestarter:5890): WARNING **: The connection is closed (firestarter:5890): GnomeUI-WARNING **: While connecting to session manager: None of the authentication protocols specified are supported. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. ^C 2) Also I cannot apt-get install sudo root@p:/# apt-get install sudo Reading package lists... Done Building dependency tree Reading state information... Done sudo is already the newest version. The following packages were automatically installed and are no longer required: gir1.2-rb-3.0 gir1.2-gstreamer-0.10 libntfs10 python-mako libdmapsharing-3.0-2 rhythmbox-data libx264-116 rhythmbox libiso9660-7 librhythmbox-core5 libvpx0 libmatroska4 gir1.2-gst-plugins-base-0.10 rhythmbox-mozilla rhythmbox-plugin-zeitgeist libattica0 libgpac0.4.5 python-markupsafe libmusicbrainz4c2a rhythmbox-plugin-cdrecorder rhythmbox-plugins libaudiofile0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 9 not fully installed or removed. Need to get 0 B/76.3 MB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y /bin/sh: 1: /usr/sbin/dpkg-preconfigure: not found (Reading database ... 495741 files and directories currently installed.) Preparing to replace linux-image-3.2.0-24-generic 3.2.0-24.39 (using .../linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb) ... dpkg (subprocess): unable to execute old pre-removal script (/var/lib/dpkg/info/linux-image-3.2.0-24-generic.prerm): No such file or directory dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg (subprocess): unable to execute new pre-removal script (/var/lib/dpkg/tmp.ci/prerm): No such file or directory dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 2 dpkg (subprocess): unable to execute installed post-installation script (/var/lib/dpkg/info/linux-image-3.2.0-24-generic.postinst): No such file or directory dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Preparing to replace linux-image-3.2.0-25-generic 3.2.0-25.40 (using .../linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb) ... dpkg (subprocess): unable to execute old pre-removal script (/var/lib/dpkg/info/linux-image-3.2.0-25-generic.prerm): No such file or directory dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg (subprocess): unable to execute new pre-removal script (/var/lib/dpkg/tmp.ci/prerm): No such file or directory dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 2 dpkg (subprocess): unable to execute installed post-installation script (/var/lib/dpkg/info/linux-image-3.2.0-25-generic.postinst): No such file or directory dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb /var/cache/apt/archives/linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• How to call JSON asynchronous in xcode/ iphone develope

  - by Frames84

  I'm using the JSON framework hosting on Google. What and it's a news app that loads JSON feeds, when app goes off to load the feed I want to display the UIActivityIndicatorView but I've found my JSON Access code is not being called asynchronous which is locking the user interface. I have highlighted the function in the code and can't figuree out without breaking how to change the code. #import "JSON DataAccess Wrapper.h" #import "JSON.h" @implementation JSON_DataAccess_Wrapper @synthesize dataItemList; ////////////////////////////////////////////// /* START FEED CONNECTION/ HANDLE METHODS */ ////////////////////////////////////////////// - (void)connection:(NSURLConnection *)connection didReceiveResponse:(NSURLResponse *)response { [responseData setLength:0]; } - (void)connection:(NSURLConnection *)connection didReceiveData:(NSData *)data { [responseData appendData:data]; } - (void)connection:(NSURLConnection *)connection didFailWithError:(NSError *)error { //label.text = [NSString stringWithFormat:@"Connection failed: %@", [error description]]; } - (void)connectionDidFinishLoading:(NSURLConnection *)connection { [connection release]; } - (NSString *)stringWithUrl:(NSURL *)url { NSURLRequest *urlRequest = [NSURLRequest requestWithURL:url cachePolicy:NSURLRequestReturnCacheDataElseLoad timeoutInterval:30]; NSData *urlData; NSURLResponse *response = nil; NSError *error = nil; /* HOW TO MAKE THE CALL BELOW ASYNCHRONOUS */ urlData = [NSURLConnection sendSynchronousRequest:urlRequest returningResponse:&response error:&error]; return [[NSString alloc] initWithData:urlData encoding:NSUTF8StringEncoding]; } -(id) objectWithUrl:(NSURL *)url { SBJSON *jsonParser = [SBJSON new]; NSString *jsonString = [self stringWithUrl:url]; return [jsonParser objectWithString:jsonString error:NULL]; } - (NSMutableArray *) downloadJSONFeed { id response = [self objectWithUrl:[NSURL URLWithString:@"http://www.mysite.co.uk/index2.php?option=JSON"]]; NSMutableArray *feed = (NSMutableArray *) response; return feed; }

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• WPF: Timers

  - by Ilya Verbitskiy

  I believe, once your WPF application will need to execute something periodically, and today I would like to discuss how to do that. There are two possible solutions. You can use classical System.Threading.Timer class or System.Windows.Threading.DispatcherTimer class, which is the part of WPF. I have created an application to show you how to use the API.     Let’s take a look how you can implement timer using System.Threading.Timer class. First of all, it has to be initialized.   1: private Timer timer; 2:   3: public MainWindow() 4: { 5: // Form initialization code 6: 7: timer = new Timer(OnTimer, null, Timeout.InfiniteTimeSpan, Timeout.InfiniteTimeSpan); 8: }   Timer’s constructor accepts four parameters. The first one is the callback method which is executed when timer ticks. I will show it to you soon. The second parameter is a state which is passed to the callback. It is null because there is nothing to pass this time. The third parameter is the amount of time to delay before the callback parameter invokes its methods. I use System.Threading.Timeout helper class to represent infinite timeout which simply means the timer is not going to start at the moment. And the final fourth parameter represents the time interval between invocations of the methods referenced by callback. Infinite timeout timespan means the callback method will be executed just once. Well, the timer has been created. Let’s take a look how you can start the timer.   1: private void StartTimer(object sender, RoutedEventArgs e) 2: { 3: timer.Change(TimeSpan.Zero, new TimeSpan(0, 0, 1)); 4:   5: // Disable the start buttons and enable the reset button. 6: }   The timer is started by calling its Change method. It accepts two arguments: the amount of time to delay before the invoking the callback method and the time interval between invocations of the callback. TimeSpan.Zero means we start the timer immediately and TimeSpan(0, 0, 1) tells the timer to tick every second. There is one method hasn’t been shown yet. This is the callback method OnTimer which does a simple task: it shows current time in the center of the screen. Unfortunately you cannot simple write something like this:   1: clock.Content = DateTime.Now.ToString("hh:mm:ss");   The reason is Timer runs callback method on a separate thread, and it is not possible to access GUI controls from a non-GUI thread. You can avoid the problem using System.Windows.Threading.Dispatcher class.   1: private void OnTimer(object state) 2: { 3: Dispatcher.Invoke(() => ShowTime()); 4: } 5:   6: private void ShowTime() 7: { 8: clock.Content = DateTime.Now.ToString("hh:mm:ss"); 9: }   You can build similar application using System.Windows.Threading.DispatcherTimer class. The class represents a timer which is integrated into the Dispatcher queue. It means that your callback method is executed on GUI thread and you can write a code which updates your GUI components directly.   1: private DispatcherTimer dispatcherTimer; 2:   3: public MainWindow() 4: { 5: // Form initialization code 6:   7: dispatcherTimer = new DispatcherTimer { Interval = new TimeSpan(0, 0, 1) }; 8: dispatcherTimer.Tick += OnDispatcherTimer; 9: } Dispatcher timer has nicer and cleaner API. All you need is to specify tick interval and Tick event handler. The you just call Start method to start the timer.   private void StartDispatcher(object sender, RoutedEventArgs e) { dispatcherTimer.Start(); // Disable the start buttons and enable the reset button. } And, since the Tick event handler is executed on GUI thread, the code which sets the actual time is straightforward.   1: private void OnDispatcherTimer(object sender, EventArgs e) 2: { 3: ShowTime(); 4: } We’re almost done. Let’s take a look how to stop the timers. It is easy with the Dispatcher Timer.   1: dispatcherTimer.Stop(); And slightly more complicated with the Timer. You should use Change method again.   1: timer.Change(Timeout.InfiniteTimeSpan, Timeout.InfiniteTimeSpan); What is the best way to add timer into an application? The Dispatcher Timer has simple interface, but its advantages are disadvantages at the same time. You should not use it if your Tick event handler executes time-consuming operations. It freezes your window which it is executing the event handler method. You should think about using System.Threading.Timer in this case. The code is available on GitHub.

  Read the article

• Why ClassCastException on JMS ConnectionFactory lookup in JNDI?

  - by Derek Mahar

  What might be the cause of the following ClassCastException in a standalone JMS client application when it attempts to retrieve a connection factory from the JNDI provider? Exception in thread "main" java.lang.ClassCastException: javax.naming.Reference cannot be cast to javax.jms.ConnectionFactory Here is an abbreviated version of the JMS client that includes only its start() and stop() methods. The exception occurs on the first line in method start() which attempts to retrieve the connection factory from the JNDI provider, a remote LDAP server. The JMS connection factory and destination objects are on a remote JMS server. class JmsClient { private ConnectionFactory connectionFactory; private Connection connection; private Session session; private MessageConsumer consumer; private Topic topic; public void stop() throws JMSException { consumer.close(); session.close(); connection.close(); } public void start(Context context, String connectionFactoryName, String topicName) throws NamingException, JMSException { // ClassCastException occurs when retrieving connection factory. connectionFactory = (ConnectionFactory) context.lookup(connectionFactoryName); connection = connectionFactory.createConnection("username","password"); session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE); topic = (Topic) context.lookup(topicName); consumer = session.createConsumer(topic); connection.start(); } private static Context getInitialContext() throws NamingException, IOException { String filename = "context.properties"; Properties props = new Properties(); props.load(new FileInputStream(filename)); return new InitialContext(props); } }

  Read the article

• setTimeout(fun) with a single argument

  - by Elazar Leibovich

  The HTML5 specifications states that setTimeout can be run without the additional "timeout" argument which is supposed to say after how many milliseconds will the function "handler" be scheduled. handle = window . setTimeout( handler [, timeout [, arguments ] ] ) Schedules a timeout to run handler after timeout milliseconds. Any arguments are passed straight through to the handler. However, I failed to find anywhere which explains what happens when no "timeout" time period is set. An example usage is, the animation implementation int the Raphael library. animationElements[length] && win.setTimeout(animation);

  Read the article

• Getting a connection from a Sybase datasource in WAS 6.1 fails with message "User name property miss

  - by Abel Morelos

  I have a standalone application that needs to connect to a Sybase database via a datasource, I'm trying to connect using getConnection() and get the connection from this Sybase datasource which is hosted in WAS 6.1, sadly I'm getting an error JZ004 - Sybase(R) jConnect for JDBC(TM) Programmer's Reference: SQL Exception and Warning Messages JZ004 error message is: User name property missing in DriverManager.getConnection(..., Properties) Action: Provide the required user property. As you can see, this is not a connectivity (so we can discard JNDI or lookup problems), but rather a configuration problem. For my Sybase datasource in WAS 6.1 I have set up the proper authentication alias (Component-managed Authentication Alias), and I know the credentials are alright, "Test Connection" is successful for this datasource. Somebody had a similar problem and was because of the authentication alias- http://forum.springsource.org/showthread.php?t=39915 Next, I tried calling getConnection() but now I provided the credentials like getConnection(user, password)... and this time it worked!!! So I suspect that somehow WAS 6.1 is not picking or taking the authentication info I set in the datasource as mentioned before. If you think that maybe getConnection(user, password) should be OK for my case, well, that's not the case since I have a requirement to keep the credentials in the server, the standalone application only needs to know the JNDI information to lookup the datasource. Please let me know if have faced a similar problem, or what would you suggest me to do. Thanks.

  Read the article

• How to configure Windows 2008 R2 server for LAN and wireless internet connections

  - by Alchemical

  For special testing purposes, we need a Windows server to allow the following: A team member can log in remotely to the server. When remotely logged in, they can disconnect the wireless connection, perform a few tests, and then reconnect the wireless connection. In general, the LAN connection would just be used for the remote login, the wireless connection would be used for performing tests including using a web browser to test certain web sites, etc. How can we successfully configure the server to support 2 network connections like this? (A regular LAN connection + a wireless connection). And also make sure that the tests we perform using the browser utilize the wireless connection for the outgoing internet activity.

  Read the article

• How can I use my own connection class with a strongly typed dataset?

  - by Maslow

  I have designed a class with sqlClient.SqlCommand wrappers to implement such functionality as automatic retries on timeout, Async (thread safety), error logging, and some sql server functions like WhoAmI. I've used some strongly typed datasets mainly for display purposes only, but I'd like to have the same database functionality that I use with my class. Is there an interface I can implement or a way to hook my command/connection class into the dataset at design or runtime? Or would I need to somehow write a wrapper for the dataset to implement these types of functions? if this is the only option could it be made generic to wrap anything that inherits from dataset?

  Read the article

• Error: Error #1502: A script has executed for longer than the default timeout period of 15 seconds.

  - by numerical25

  I got this error and I am not sure what it's about. The last thing I remember doing is adding a clearInterval() method to clear some setTimeOut() intervals varibles. besides that I am not sure what it could be. Not asking for a solution. But if anyone know's any possibilities of what it could trigger that error, maybe that might help me to figure out where its coming from.

  Read the article

• Java HTTP Request Occasionally Hangs

  - by behrk2

  Hello Everyone, For the majority of the time, my HTTP Requests work with no problem. However, occasionally they will hang. The code that I am using is set up so that if the request succeeds (with a response code of 200 or 201), then call screen.requestSucceeded(). If the request fails, then call screen.requestFailed(). When the request hangs, however, it does so before one of the above methods are called. Is there something wrong with my code? Should I be using some sort of best practice to prevent any hanging? The following is my code. I would appreciate any help. Thanks! HttpConnection connection = (HttpConnection) Connector.open(url + connectionParameters); connection.setRequestMethod(method); connection.setRequestProperty("WWW-Authenticate", "OAuth realm=api.netflix.com"); if (method.equals("POST")) { connection.setRequestProperty("Content-type", "application/x-www-form-urlencoded"); } int responseCode = connection.getResponseCode(); System.out.println("RESPONSE CODE: " + responseCode); if (connection instanceof HttpsConnection) { HttpsConnection secureConnection = (HttpsConnection) connection; String issuer = secureConnection.getSecurityInfo() .getServerCertificate().getIssuer(); UiApplication.getUiApplication().invokeLater( new DialogRunner( "Secure Connection! Certificate issued by: " + issuer)); } if (responseCode != 200 && responseCode != 201) { screen.requestFailed("Unexpected response code: " + responseCode); connection.close(); return; } String contentType = connection.getHeaderField("Content-type"); ByteArrayOutputStream baos = new ByteArrayOutputStream(); InputStream responseData = connection.openInputStream(); byte[] buffer = new byte[20000]; int bytesRead = 0; while ((bytesRead = responseData.read(buffer)) > 0) { baos.write(buffer, 0, bytesRead); } baos.close(); connection.close(); screen.requestSucceeded(baos.toByteArray(), contentType); } catch (IOException ex) { screen.requestFailed(ex.toString()); }

  Read the article

• problem writing xml to file with .net mvc - timeout?

  - by Mark

  Hey, so having an issue with writing out to an xml file. Works fine for single requests via the browser, but when I use something like Charles to perform 5-10 repeated requests concurrently several of them will fail. The trace simply shows a 500 error with no content inside, basically I think they start timing out waiting for write access or something... This method is inside my repository class, have also attempted to have repository instance as a singleton but doesn't appear to make any difference.. Any help would be much appreciated. Cheers public void Add(Request request) { try { XDocument requests; XmlReader xmlReader; using (xmlReader = XmlReader.Create(_requestsFilePath)) { requests = XDocument.Load(xmlReader); XElement xmlRequest = new XElement("request", new XElement("code", request.code), new XElement("date", request.date), new XElement("email", new XCData(request.email)), new XElement("name", new XCData(request.name)), new XElement("recieveOffers", request.recieveOffers) ); requests.Root.Element("requests").Add(xmlRequest); xmlReader.Close(); } requests.Save(_requestsFilePath); } catch (Exception ex) { HttpContext.Current.Trace.Warn("Error writing to file: "+ex); } }

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >