Search Results

Search found 6288 results on 252 pages for 'credit card'.

Page 155/252 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• How do I get a Realtek Wireless USB Airlink101 AWLL5088 working?

  - by Tobias_Mann

  I am running Ubuntu 11.10, 32bit. I ordered them a Realtek Airlink101 AWLL5088 based upon the relative ease for linux installation. I am having trouble installing the drivers. I copied the drivers to /usr/src/ and ran sudo ./install.sh from that director listed above. I have tried ndiswrapper, and allowing the default drivers, but with no luck. It seems to continue to try and use the default free drivers, even though I have blacklisted them using the guide described here. There was no error, I was asked which card I was using. I looked at the packaging and at the support page, and guessed number 2, allowed to finish, and rebooted. It continued detect the wireless network after the reboot, but would never complete the connection. I would appreciate any feedback. I am kind of stuck trying to figure this out.

  Read the article

• Ubuntu 12.04 Server monitor goes into sleep mode (no display) after fresh install

  - by xamox

  For some reason I can boot and either use Ubuntu 12.04 server edition, or desktop version. I can live boot the disk, I can go through the installer, or even use the ubuntu alternate installer. But for some reason after the install completes and I reboot the monitor seems to go back into sleep mode and then never loads the command prompt. This is on an industrial adlink MXE-1300 PC. I've installed ubuntu server fine on other models of adlink machines but this one doesn't want to seem to play nice. To me it seems like if it was a video card issue than I could never even load the installer or run ubuntu in live mode. Any thoughts or troubleshooting tips would be greatly appreciated.

  Read the article

• Ubuntu 12.04 wireless detected, but can't connect to 128-bit WEP enabled microsoft MS-700 base station

  - by ubuntufan

  I installed Ubuntu 12.04 on a Presario R 3000. The Wireless card was not detected (firmware missing). Based on several related posts, I downloaded and installed the b43 driver and wireless was finally enabled. However, I am unable to connect to my base station successfully. The base station is configured for WEP 128-bit. I tried both infrastructure mode and ad-hoc mode (with the channel, band, etc. configured). Appreciate any help in trying to get past this.

  Read the article

• When trying running Ubuntu 12.10 off a usb drive, I encounter an error while prevent me from doing anything else

  - by Nil

  The details are that I used Universal USB Installer version 1.9.1.8 from pendrivelinux.com to install ubuntu 12.10 onto a 4gb pendrive as per instruction on Ubuntu's website. However, after I boot with drive I am met with the following message: "The system is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself." Pressing Ctrl Alt F1 doesn't allow me access and the options on the dialog box either send me through a loop returning me to the previous dialog or just leave me dead in the water. Pressing Ctrl Alt Del does however restart the computer if I am dead in the water, so ubuntu isn't COMPLETELY unresponsive... I feel I should mention that I'm trying to run this distribution on my netbook. I can't install it directly to the harddrive since I need my current Windows distribution for certain programs that don't quite agree with WINE yet.

  Read the article

• OpenGL: Drawing to a texture

  - by Danran

  Well im just a bit stuck wondering how to draw an item to a texture. Specifically, i'm using; glDrawArrays(GL_LINE_STRIP, indices[0], indices.size()); Because what i'm drawing via the above function updates every-frame, i'm just totally not sure how to go about drawing what i have to a texture. Any help is greatly appreciated! Edit: Well unfortunately my graphics card doesn't support FrameBuffer Objects :/. So i've been trying to get the copy contents from backbuffer method working. Here's what i currently have; http://pastebin.com/dJpPt6Pd And sadly all i get is a white square. Its probably something stupid that i'm doing wrong. Just unsure what it could be?

  Read the article

• How to disable VGA

  - by Bitmap

  If i run lspci | grep VGA I get below output which tells me below VGA cards are present on my computer. 01:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 08:02.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) The ES1000 is an onboard card which came with my machine. Do anyone know how to disable this VGA on my machine. The reason for this request is because if I run xrandr I get the output as shown below: xrandr: Failed to get size of gamma for output default Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 50.0* 800x600 51.0 52.0 53.0 680x384 54.0 55.0 640x480 56.0 512x384 57.0 400x300 58.0 320x240 59.0 Which means I am not able to configure nVidia to accept smaller resolution. Thank you.

  Read the article

• BCM4313 partially working on Toshiba Satellite R630 (Ubuntu 12.10)

  - by Denis

  New to Ubuntu. During installation, the computer identified the wifi card and asked me to connect to the network. I did. After the first restart the wifi was working and I could see networks and connect to them. After the second restart the wireless has VANISHED. Still, the Broadcom STA drivers are enabled in system settings/additional drivers. Tried to restart 5 more times- no effect. I have studied very many topics on askubuntu but none of them work.

  Read the article

• GPU optimization question: pre-computed or procedural?

  - by Jay

  Good morning, I'm learning shader program and need some general direction. I want to add noise to my laser beam (like this). Which is the best way to handle it? I could pre-compute an image and pass it to the shader. I could then use the image to change the opacity and easily animate the smoke by changing the offset of the texture lookup. I could also generate noise in the shader and do the same thing the texture was used for. Is it generally better to avoid I/O to the graphics card or the opposite? Thanks!

  Read the article

• No video signal after install

  - by tW4r

  Today I tried to install Ubuntu 12.10 to my machine, but all the time I encountered the same problem, I successfully boot from Ubuntu 12.04 DVD, and a purple background comes up with accessibility and keyboard icons at the bottom of the screen, then when you wait a while a monitor text comes up "No signal" (Keep in mind that this signal is only shown when there's cable in the monitor HDMI plug), and nothing happens, a little later disk drive stops flashing meaning that disk finished being read. Even if you reset the computer you still get no signal, you have to turn the power of and on again, and plug HDMI out and put it in again. My info: Graphics card: ATI/AMD Radeon HD 4850 Connection to monitor: HDMI Monitor: Samsung SyncMaster T220HD

  Read the article

• Ubuntu display - no existent

  - by Patrick M

  My HP Pavillion Dv5 1004nr worked great with Ubuntu up until 11.04. Now, ever since Unity desktop environment the display has been sporadic at best. I was told that the video driver bugs (known and largely ignored) were fixed for the ATI raedon card in my laptop with 13.04. So I installed it. 13.04 doesn't even detect the display. Boots to black screen every time now. Is there ever going to be a fix for the AMD architecture with ATI raedon chipsets? do the developers even care? this has been an issue for years, and no sign of a fix in sight....

  Read the article

• lower graphics setting in ubuntu

  - by zkent

  First off, I am new to Ubuntu. I come from a Windows background (DOS before that) and am loving it so far. I installed it on an older Dell laptop that I wanted to get another year out of. I set this machine up primarily as a LAMP development machine for a project I am working on. The machine is a Vostro 1500 and it has 4GB RAM (maxed) and an upgraded hard drive. I can't watch YouTube videos for long before it starts to overheat and start acting sporadic. I can live without YouTube but every so often the application switching (alt-tab) gets slower and begins not showing all applications and the Dash home quits displaying properly. I am sure I am asking a lot of this old machine. What I really want to know is: are there any settings in Ubuntu that allow me to lower the graphic effects (fade-ins, transparencies, fancy transitions, etc) that would be less taxing on the video card?

  Read the article

• How to use NVIDIA GeForce M310 on Ubuntu 12.10 running as guest in Virtualbox?

  - by huub

  Last couple of weeks played around with Ubuntu 12.10. This is running as a guest on Virtualbox hosted at Windows 7. There have been some challenges with the Unity 3D stuff. Particular due to not supporting X11 release 1.13 till very recently. Since today we are able to download Virtualbox version 4.2.2 which has through guest additions also support for X11 release 1.13. SO far great work everybody. Since Unity now only runs in 3D mode it would be nice to access the graphics card directly from Virtualbox. lshw -c display shows: VGA compatible controller; product: VirtualBox Graphics Adapter. QUESTION: how to get the 3D and other graphics directly supported by the hardware ie Nvidia GeForce M310

  Read the article

• Ubuntu 12.04 x64 - Very slow response and sluggishness

  - by Murphy1138

  Recently updated to 12.04 x64 on my AMD HEX core 4GB system, over the last few days I feel that the overall system is sluggish/laggy , for instance hitting the dash button, the dash opens but the recent activity of files/videos etc is incredibly slow to populate, like wise in Nautilus and browsing my media, the file names are showing up but it takes an age to populate the "thumb" of the video, If I go into Gnome-shell the shell response is a little faster but again clicking on applications there is still a noticeable pause. I have the latest Nvidia Drivers loaded and I have very fast SATA drives, if I reboot into windows 7 the system is so much quicker in its response, I only use windows for games and Ubuntu is my main OS. 10.04/10.10/11.04 was Super quick and this was when the system still had a Duel Core Chip and a worse Nvidia card, 11.10 was pretty snappy, but 12.04 just feels bloated on each system I have installed it on. My hardware is more than up to the task so has anyone got any commands i can run to help diagnose the issue? Anyone else got the same problems? Thanks Murph

  Read the article

• (My) Sun Ray 3i

  - by user13346636

  Last week, some Sun Ray devices were shown at the LASDEC exhibition. Afterward, they were brought back to the Aoyama Center, but not all of them found a place to be stored. So, two days ago, Iwasaki-san, one of the co-workers I've been close to (and who was at the exhibition), put a Sun Ray 3i (all-in-one with 21.5" screen) on my (shared) desk. Yay! I managed to get a Japanese keyboard, and now I can access my card and cardless sessions from Germany, and the performance is just great, as good as when I work from home in Hamburg. That's the way my deskt looks now,almost as messy as my desk in Hamburg: And my back is very grateful.

  Read the article

• How do I find out which driver a piece of hardware is using?

  - by Oli

  Today I'm trying to figure out which driver is best for my USB wireless dongle. Everywhere I look I just see Ralink STA but this isn't telling me which module this actually is. I'm sure there's a way of looking it up but the computer should be able to tell me, shouldn't it? Meta: This question is open to any piece of hardware, not just my wireless card. It would be helpful if we had a thread of useful diagnostic procedures so that other people can find out what's going on with their hardware.

  Read the article

• How to install nvidia optimus driver on ubuntu 12.10?

  - by Adam

  I have followed http://ubuntuportal.com/2012/01/bumblebee-3-0-tumblewed-nvidia-optimus-gpu-switching-for-linux-has-been-released-how-to-install-bumblebee-3-0-on-ubuntu.html this guide to install nvidia driver on my Dell Inspiron N5110 notebook (Intel HD Graphics 3000 + NVIDIA GeForce GT525M), but i always get some error while i want to start any program with the optirun command. Terminal says: adam@Adam-LT:~$ optirun firefox [ 1482.559417] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver [ 1482.559517] [ERROR]Aborting because fallback start is disabled. My laptop cooler always cools the laptop, which means that nvidia card is consuming power in the background. (Terminal sometimes says something daemon-server is not running.) Can you give me some solution for this?

  Read the article

• Dual display setup - only one displayed after logon

  - by oneofthemany

  During boot process my desktop shows both Monitors, but after log I only get one. I'm using Ubuntu 11.10 When I go into Displays its still only shows on Monitor. Here is my graphics card details: 01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1) (prog-if 00 [VGA controller]) Subsystem: Dell Device 0405 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at dd000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at de000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at dfe00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia_96, nvidia_173, nouveau, nvidiafb

  Read the article

• Momentary freezes about every 60 seconds

  - by Barafu Albino

  I have just switched from OpenSuse to Ubuntu (the only reason is poor repositories - I got tired of installing everything from tar-balls). OpenSuse KDE worked flawlessly. Off-topic OS 7 does too. However, Ubuntu 13.04 after all updates keeps freezing about every minute. The time differs between occasions. It halts just for a fraction of a second, too quick to notice, but music crackles, and compressed video looses its tracks and covers with errors until a scenecut. I don't know what is responsible, the logs are clear. Tried to: change audio card, switched to Nvidia drivers and back, paused all unneeded daemons. Didn't help much. Any ideas where to look? I am experienced in Linux, just new in Ubuntu.

  Read the article

• No sound ubuntu 12.04, Tried everything

  - by user74679

  I've tried to find a solution to this but haven't been able to yet. I'm using ubuntu 12.04 installing using wubi installer. I have no audio. I can see the sound icon on the bar on top and interact with it. It doesn't say mute, it seems normal. "Codec:" /proc/asound/card*/codec* proc/asound/card0/codec#0:Codec: IDT 92HD75B3X5 proc/asound/card0/codec#1:Codec: LSI ID 1040 proc/asound/card1/codec#0:Codec: ATI R6xx HDMI Alsa shows all bars full for IDT 92HD75B3X5, no bars for ATI HDMI. Please help. I've reinstalled all drivers as well.

  Read the article

• How do I fix the audio on my laptop. model Fujitsu B6220

  - by user89756

  I reinstalled Ubuntu 12.04 on my laptop because the Unity desktop was freezing. Reinstalling 12.04 seems to have fixed the freezing problem, but now the audio does not work. When I go to SettingsAudio and under the Output tab it only has the option for Digital Output. There is no option for Analog Output. The sound card show up under lspci as: "00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)" What would be the command to reinstall the audio subsystem? If that would fix it...

  Read the article

• Dual screens with one workspace on each?

  - by user2413

  Hi all, I have a dual screen, compiz-fusion and i don't have a NVDIA/ATI graphic card and i use ubuntu 10.10. i currently use the two monitors: the desktop is stretched across monitors and i can drag an application across monitors. My question follows: i would like to use the left monitor only to display workspace1 and the right monitor to display workspace2. Is this possible ? If yes how (I've found mention of dualXscreen on this board, but i can't find it in the compizConfig menus). Best,

  Read the article

• poor font rendering in browsers on 12.04

  - by Alecs

  I'm using a Lenovo B570e. I've installed the mesa-utils for the graphic driver because it wasn't recognized by default. Now I have this: graphic card : Intel® Sandybridge Mobile x86/MMX/SSE2. I don't know if it's just my impression but I think all the images are a little bit pixelated and I think it have something to do with the drivers. Maybe is not the correct driver associated with it, I'm saying this because when I was on Windows 7 the name of the driver was something like " Intel hd graphics..." Any suggestions? Thank you! Later edit: This seems to happen only in browsers.

  Read the article

• Dual monitor with different resolutions problem

  - by Mackemint

  I'm on an LG R405 with a PM965 chipset and a NVIDIA GeForce Go 8400M GS gaphics card. I'm trying to use an external monitor (Benq senseye3 G2222HDL) through a VGA out port. All was fine when installing except for the screen layouts were flip-flopped (computer defalut setup so external monitor was to the right instead of left). When I moved the secondary monitor to its real position in the setup, I started getting strange problems. I loose representation of large portions of the screen, on both screens, and have to reboot. If I plug the monitor in after rebooting I get more problems than when booting up with the monitor already plugged in, but in both cases I can barely see what I'm doing. Please advice! Regards /M

  Read the article

• How to debug wifi connection?

  - by mmb

  I am using Ubuntu's Network Manager to connect to a local wifi router. My problem is, that it often disconnects without any visible reason (router is on, internet connection seems to be working, wifi diodes are blinking). I mostly have to disable wifi from Network Manager, enable it again to get wifi connecting again. Plus I am often experiencing Network Manager trying to connect to my wifi, trying several times but then giving up. I even tried an external usb-wifi card, but with the very same results. My question is: How can I debug this? Which logs should I read to see what is really happening when all of these errors occur - so I can post them here and see how to proceed?

  Read the article

• why is the video freezing all the time on youtube yet the audio plays ok throughout?

  - by billy

  this is just a fresh install of ubuntu 12.04 . I tried it a few years ago when it was on 7.04 and had a lot of issues,then my pc broke and ive never tried it again until tonight. Everything seems to be working well except videos on youtube either wont play at all or freeze while the audio keeps going as normal. Is this a common issue thats gonna be fairly easy to fix or is it something to do with my video card?(ati radeon2100). Any help/advice would be much appreciated.If any other info is needed about my pc feel free to ask. thanks

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >