Search Results

Search found 11737 results on 470 pages for 'intel core i7'.

Page 155/470 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

  • Asus P6X58D & 12GB of RAM

    - by Hunter
    I just assembled my new PC and it screams, BUT it's only recognizing 8GB of ram in BIOS and OS rather than the installed 12GB. In the BIOS the RAM was registering at 1066 so I set it to 1600MHz. I update the BIOS to the latest non-beta release. http://www.asus.com/product.aspx?P_ID=wurRaDZ8lo4Ckukj OS = Windows 7 Ultimate 64-bit Mobo = Asus P6X58D Premium CPU = Intel Core i7 920 RAM = CORSAIR XMS3 12GB (6 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 HDD = Intel 80GB SSD SATA II PS = Kingwin 1000W Modular I've installed the Beta BIOS 0808 but no luck!

    Read the article

  • Failures when copying between two external drives on the same controller

    - by Krzysztof Kosinski
    I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

    Read the article

  • How to record my voice on a Mac Mini with headphones?

    - by user718408
    I'm try to record my voice via the headphone on a Mac Mini, but it's not working. I saw on Apple's site that the Mac Mini can record voice, but it doesn't seem to be working for me. Here is a hardware overview: Model Name: Mac Mini Model Identifier: Macmini3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.26 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 3 MB Memory: 4 GB Audio: Make: Intel High Definition Audio Audio ID: 65 Headphone connection: Combination Output Line Input connection: Combination Input Speaker connection: Internal S/PDIF Optical Digital Audio Output connection: Combination Output S/PDIF Optical Digital Audio Input connection: Combination Input Any ideas how I can successfully get recording working?

    Read the article

  • Problem with xvideoservice thief

    - by Nrew
    Xvideo service thief is an application that allows you to download and convert youtube videos into .avi format. The problem is when it tries to convert the .flv into a .avi. The audio in the video is not being played when you try to play the video. But the .flv works fine. I have also enabled Intel(R) speedstep feature in my processor(Pentium Dual core E5200) to decrease the power consumed by the processor with the help of Granola software. What might be the reason for the audio less video converter by xvideo service thief? Could it be the enabling of intel(R) speedstep? Because the software works fine when its not enabled. Is this possible?That the output some applications can be altered when enabling this processor feature?

    Read the article

  • Weird routing issue (updated)

    - by smccloud
    I just updated the route tables due to a mistake on my part. I am working on getting networking working correctly on a cluster of 14 virtual servers at a customer site. 11 of them work fine for routing and 3 don't work correctly for their administrative network (172.28.56.0). All are running Windows Web Server 2008R2. Default gateway is set on the production network (172.28.58.0) and not on the administrative network (handled with persistent static routes). On a working server, route print gives me the following (MACs redacted) =========================================================================== Interface List 11...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection 13...XX XX XX XX XX XX00 0c 29 85 b2 98 ......Intel(R) PRO/1000 MT Network Connection #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 15...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.28.58.1 172.28.58.11 266 10.18.1.22 255.255.255.255 172.28.58.1 172.28.58.11 11 10.32.0.0 255.255.0.0 172.28.56.1 172.28.56.201 11 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.28.34.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.42.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.56.0 255.255.255.0 On-link 172.28.56.201 266 172.28.56.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.56.201 255.255.255.255 On-link 172.28.56.201 266 172.28.56.255 255.255.255.255 On-link 172.28.56.201 266 172.28.58.0 255.255.255.224 On-link 172.28.58.11 266 172.28.58.0 255.255.255.224 172.28.58.1 172.28.58.11 11 172.28.58.1 255.255.255.255 172.28.58.1 172.28.58.11 11 172.28.58.11 255.255.255.255 On-link 172.28.58.11 266 172.28.58.31 255.255.255.255 On-link 172.28.58.11 266 172.28.60.0 255.255.255.0 172.28.56.1 172.28.56.201 11 172.28.63.0 255.255.255.0 172.28.56.1 172.28.56.201 11 192.168.0.0 255.255.0.0 172.28.56.1 172.28.56.201 11 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.28.56.201 266 224.0.0.0 240.0.0.0 On-link 172.28.58.11 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 172.28.56.201 266 255.255.255.255 255.255.255.255 On-link 172.28.58.11 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 172.28.56.0 255.255.255.0 172.28.56.1 1 172.28.63.0 255.255.255.0 172.28.56.1 1 192.168.0.0 255.255.0.0 172.28.56.1 1 172.28.60.0 255.255.255.0 172.28.56.1 1 10.32.0.0 255.255.0.0 172.28.56.1 1 172.28.34.0 255.255.255.0 172.28.56.1 1 172.28.42.0 255.255.255.0 172.28.56.1 1 0.0.0.0 0.0.0.0 172.28.58.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None On one of the non-working server, route print gives me the following (MACs redacted) =========================================================================== Interface List 11...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection 13...XX XX XX XX XX XX ......Intel(R) PRO/1000 MT Network Connection #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 14...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 16...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.28.58.1 172.28.58.21 266 10.32.0.0 255.255.0.0 172.28.56.1 172.28.56.211 11 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 172.28.34.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.42.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.56.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.56.211 255.255.255.255 On-link 172.28.56.211 266 172.28.58.0 255.255.255.0 172.28.58.1 172.28.58.21 11 172.28.58.0 255.255.255.224 On-link 172.28.58.21 266 172.28.58.21 255.255.255.255 On-link 172.28.58.21 266 172.28.58.31 255.255.255.255 On-link 172.28.58.21 266 172.28.60.0 255.255.255.0 172.28.56.1 172.28.56.211 11 172.28.63.0 255.255.255.0 172.28.56.1 172.28.56.211 11 192.168.0.0 255.255.0.0 172.28.56.1 172.28.56.211 11 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 172.28.56.211 266 224.0.0.0 240.0.0.0 On-link 172.28.58.21 266 255.255.255.255 255.255.255.255 On-link 127.0.0.1 06 255.255.255.255 255.255.255.255 On-link 172.28.56.211 266 255.255.255.255 255.255.255.255 On-link 172.28.58.21 266 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 172.28.56.0 255.255.255.0 172.28.56.1 1 172.28.60.0 255.255.255.0 172.28.56.1 1 172.28.63.0 255.255.255.0 172.28.56.1 1 172.28.34.0 255.255.255.0 172.28.56.1 1 172.28.42.0 255.255.255.0 172.28.56.1 1 192.168.0.0 255.255.0.0 172.28.56.1 1 10.32.0.0 255.255.0.0 172.28.56.1 1 0.0.0.0 0.0.0.0 172.28.58.1 Default 172.28.58.0 255.255.255.0 172.28.58.1 1 =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I am at a complete loss why the non-working servers have no On-link route for 172.28.56.0. Does anyone have any suggestions on what I should be looking at to figure this out? Also, I do have "physical" access to the console if needed through vSphere Client.

    Read the article

  • Unable to run VMs on hyper-v

    - by PRAWAT-DS
    Folks/Mates, I need some advise and assistance regarding the testing of Hyper-V. Here is my h/ware configuration: 1) Intel i5 processor (i5-750) 2) Intel M/B DP55WB 3) 6 GB DDR3 RAM OS = Server 2008 R2 Standart (evaluation copy). I installed 2008 r2 on my machine and added hyper-v role to it. I created 2 VMs and installed OS. But after finishing the OS installation the VMs are not booting up. After finishing the OS installation, the VM reboots automatically (normal behaviour) and shows "preparing your system for first time" after that it reboots and didn't come online. Few things to notice, when I am running "securable" on my server 2008 R2 OS it shows that processor is not supporting h/ware virtulization, but (since my desktop is dual boot) when I am running "securable" on my windows 7 OS, it shows that process "does" supports hardware virtulization. VT option is already enabled in BIOS. Any help and suggestions are highly appreciated :) Thanks in advance. Pradeep Rawat

    Read the article

  • What will happen with my RAID5 after motherboard change?

    - by abatishchev
    Currently I have ASUS P5Q-EM and 3 HDD in RAID5 using it's on-board RAID controller Intel ICH10R. I want to bye a new motherboard, for example, Gigabyte GA-EQ45M-S2 which also have on-board RAID controller, but Intel ICH10DO. What will happen with my data on RAID5? Will I have to re-create the array from the scratch and lost all my data? Is such array a soft RAID or soft-hard? What if my current motherboard will broken? What will happen with my data?

    Read the article

  • RAID P410i and P812 performance issues

    - by Alexey
    I'm having much trouble with I/O performance of HP DL360 server with two RAID controllers - P410i and P812, Windows Server 2008, 36 GiB RAM and 16 x Intel Xeon x5550. The server runs a bunch of tasks producing heavy sequential I/O, and after about 20-30 minutes of intensive work it looks like the tasks are stuck, not using CPU and with enough free memory (so this cannot be a bottleneck). The same tasks were running quite well on the older server (Windows Server 2003, 4 x Intel Xeon, 12 GiB RAM). RAID cache is present, write-cache battery is installed. Cache is configured as 25% readahead/75% writeback. The swap file resides on the logical disk served by P410i and other logical disks are on P812. Can someone tell me what can be the matter of this? Is this a hardware problem or misconfiguration?

    Read the article

  • Stop RAID 5 from Initializing

    - by Antz
    Hi, I am trying to follow Ictinike's guide on Recovering Intel RAID "Non-Member Disk" Error found here, Ictinike's RAID recovery Guide I have recreated my RAID array as per the instructions. However my RAID array status is then automatically set to: INITIALIZE When I boot back into my Windows XP desktop, the Intel Matrix Storage Utility begins to "Initialize" my drives. This is a long slow process that will take about 20 hours. I suspect all my data will be lost. I have gone back into my bios and disabled my RAID controller to prevent any further initialization and data loss. I have read that initialization will cause data loss. I've also read somewhere that it won't. I am not so confident in the latter. Is there anyway to stop this initialization process so I can continue to follow the steps in the recovery guide? Some system specs: ABIT IP35 Pro Motherboard ICH9R on board RAID controller

    Read the article

  • Drawing in iPad

    - by Manjunath
    Hi all, I am trying to draw custom shapes in iPad application. I am using UIBezierPath for drawing which is available for 3.2 onwards. My question is whether it is good to use this class or should I go to the core graphics? Is there any difference between uibezierpath and core graphics drawing related to performance?

    Read the article

  • Hardware upgrade: Windows 7 bluescreens, Vista loads

    - by Daniel Schaffer
    I just did a fairly significant hardware upgrade while keeping my hard disks. The old system was a dell Optiplex 745 with an Intel Core 2 duo, LGA 775. The new system is custom built, Intel i5 750. I know you're supposed to do a clean install with a hardware upgrade like this, but I'd had success in the past doing the stealth hardware upgrade like this, so I figured I'd give it a shot. Windows 7 Ultimate 64 bit gets through the loading screen and immediately blue screens and reboots. Windows Vista Home Premium 32-bit, which I have on an old hard drive from an AMD box (!!) loads up fine. I ran through the windows memory checker just to be sure, and my memory is fine. So, is the BSOD the result of some sort of protection mechanism specific to Windows 7? Is there any hope of salvaging that install?

    Read the article

  • Solr Multicore Admin Problem

    - by Daniel M
    Im trying to add a url based security constraint to solr deployed in websphere 6.1. If I specify the core name in the url of the constraint then the admin url for that core gives a 404. Has anyone had any success with this or any suggestions? Cheers

    Read the article

  • Preparing Automatic Repair appears out of nowhere & takes forever?

    - by Jörg B.
    I shutdown my work machine (Windows 8.1 Pro) without any errors appearing (and without installing any new software and especially no new drivers the last couple days) yesterday evening, turned it on this morning and it automatically started into 'Preparing Automatic Repair' mode. 1st of - is there any way to get more information WHY this is appearing out of the blue and.. 2ndly, how long is this usually supposed to take? This is a rather beefy machine (Intel 3770k / 4 core 3.9ghz, Intel SSDs only and 32 gb of ram) but this screen has been 'loading' for almost 1.5 hours now. Is there any sort of debug/verbose mode that would give me ANY indication what's going on?

    Read the article

  • Custom built machine has much higher power consumption than expected

    - by foraidt
    I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

    Read the article

  • Stability, x86 Vs Sparc

    - by Jason T
    Our project are plan to migrate from Sparc to x86, and our HA requirement is 99.99%, previous on Sparc, we assume the hardware stability would like, hardware failure every 4 month or even one year, and also we have test data for our application, then we have requirement for each unplanned recovery (fail over) to achieve 99.99% (52.6 minutes unplanned downtime per year). But since we are going to use Intel x86, it seems the hardware stability is not so good as Sparc, but we don't have the detail data. So compare with Sparc, how about the stability of the Intel x86, should we assume we have more unplanned downtime? If so, how many, double? Where I can find some more detail of this two type of hardware?

    Read the article

  • Unable to edit .less file dynamically using dotless

    - by newbie_86
    I've installed dotless and i see the handler has been added to my web.config file. However, i am unable to make changes to the .less file dynamically and reload the page and see the effect of the changes...Is there some setting I need to turn on? This is the handler: <handlers> <add name="dotless" path="*.less" verb="GET" type="dotless.Core.LessCssHttpHandler,dotless.Core" resourceType="File" preCondition="" /> </handlers>

    Read the article

  • How to move a windows machine properly from RAID 1 to raid 10?

    - by goober
    Goal I would like to add two more hard drives to my current RAID 1 setup and create a RAID 0 setup on top of the two RAID 1 setups (which I believe is referred to as "RAID 10"). Components Involved Intel P68 Chipset Motherboard 4 SATA ports that can be configured for Raid An intel SSD cache that sits in front of the RAID, and a 64 GB SSD configured in that manner Two 1TB HDDs configured in RAID 1 OS: Windows 7 Professional Resources Consulted so far I found a great resource on LinuxQuestions.org for a good "best practices" process for Linux machines, but I'd like to develop a similar process that I know works on Windows Machines.

    Read the article

  • working on lists in python

    - by owca
    I'm trying to make a small modification to django lfs project, that will allow me to deactivate products with no stocks. Unfortunatelly I'm just beginning to learn python, so I have big trouble with its syntax. That's what I'm trying to do. I'm using method 'has_variants' which returns true if product has any. Then I'm building a list from variants for this product. Next for every product in this list (I've called it 'set') I check it's stock and set bool variable 'inactive' to true if product has no stocks and to false if there are any. Finally if 'inactive' is false I'm setting self.active to 0. Code fails in line with: set[] = s How to correct it ? def deactivate(self): """If there are no stocks, deactivate the product. Used in last step of checkout. """ if self.has_variants(): for s in self.variants.filter(active=True): set[] = s for var in set: if var.get_stock_amount() == 0: inactive = True else: inactive = False else: if self.get_stock_amount() == 0: inactive = True if inactive: self.active = False return 0 error log : Traceback (most recent call last): File "manage.py", line 11, in <module> execute_manager(settings) File "/home/purplecow/rails/purpledev/site-packages/django/core/management/__i nit__.py", line 362, in execute_manager utility.execute() File "/home/purplecow/rails/purpledev/site-packages/django/core/management/__i nit__.py", line 303, in execute self.fetch_command(subcommand).run_from_argv(self.argv) File "/home/purplecow/rails/purpledev/site-packages/django/core/management/bas e.py", line 195, in run_from_argv self.execute(*args, **options.__dict__) File "/home/purplecow/rails/purpledev/site-packages/django/core/management/bas e.py", line 213, in execute translation.activate('en-us') File "/home/purplecow/rails/purpledev/site-packages/django/utils/translation/_ _init__.py", line 73, in activate return real_activate(language) File "/home/purplecow/rails/purpledev/site-packages/django/utils/translation/_ _init__.py", line 43, in delayed_loader return g['real_%s' % caller](*args, **kwargs) File "/home/purplecow/rails/purpledev/site-packages/django/utils/translation/t rans_real.py", line 205, in activate _active[currentThread()] = translation(language) File "/home/purplecow/rails/purpledev/site-packages/django/utils/translation/t rans_real.py", line 194, in translation default_translation = _fetch(settings.LANGUAGE_CODE) File "/home/purplecow/rails/purpledev/site-packages/django/utils/translation/t rans_real.py", line 180, in _fetch app = import_module(appname) File "/home/purplecow/rails/purpledev/site-packages/django/utils/importlib.py" , line 35, in import_module __import__(name) File "/home/purplecow/rails/purpledev/lfs/caching/__init__.py", line 1, in <mo dule> from listeners import * File "/home/purplecow/rails/purpledev/lfs/caching/listeners.py", line 10, in < module> from lfs.cart.models import Cart File "/home/purplecow/rails/purpledev/lfs/cart/models.py", line 8, in <module> from lfs.catalog.models import Product File "/home/purplecow/rails/purpledev/lfs/catalog/__init__.py", line 1, in <mo dule> from listeners import * File "/home/purplecow/rails/purpledev/lfs/catalog/listeners.py", line 5, in <m odule> from lfs.catalog.models import PropertyGroup File "/home/purplecow/rails/purpledev/lfs/catalog/models.py", line 589 set[] = s ^ SyntaxError: invalid syntax

    Read the article

  • WatiN ie9 confirm dialog is not working

    - by Andrew
    var dialogHandler = new WatiN.Core.DialogHandlers.ConfirmDialogHandler(); using (new WatiN.Core.DialogHandlers.UseDialogOnce(browser.DialogWatcher, dialogHandler)) { browser.Button(Find.ById("btnSave")).ClickNoWait(); dialogHandler.WaitUntilExists(); } it's not working on ie 9, javascript confirm I already use latest version 2.1

    Read the article

  • VGA resolution with Sony Bravia TV

    - by prestomation
    I just bought Sony Bravia KDL40S5100 tv. The VGA input is acting weird. I have a Gateway desktop with Windows 7 and Intel 945 graphics. I also have a laptop running Ubuntu 9.04. The TV will not display the gateway when the resolution is over 1360x768, I have to wait for it to time out and bring me back. The Intel driver even urges me to switch to the "recommended" 1920x1080. I just installed Win7 using this tv as the monitor. When the orginial welcome screen started after setup, it started me at 1080. I had to start in safemode to set a res that would work! When I plug my laptop into the TV, 1920x1080 works just fine. Any ideas? This laptop also has Win7, which I am going to try, but I haven't gotten a chance yet.

    Read the article

  • Eclipse: would more CPU cores with HyperThreading help increase speed?

    - by Dylan
    I'm programming a very large project in Eclipse. Right now I use a dual core machine with 2GB RAM, but Eclipse is sometimes busy for minutes (refreshing/indexing/building), so I'm upgrading to a new machine (with 16GB RAM and an SSD). Now I must choose between an Intel 2500K or an Intel 2600K that has HyperThreading. The price difference is about $100. Would that be worth it, for Eclipse, or is more memory/faster drive much more important for Eclipse ? Can Eclipse make use of the HyperThreading at all?

    Read the article

  • Invoke Python modules from Java

    - by user36813
    I have a Python interface of a graph library written in C - igraph (the name of library). My need is to invoke the python modules pertaining to this graph library from Java code. It goes like this, the core of library is in c. This core has been imported into Python and interfaces to the functions embedded in core are available in Python. My project's rest of the code is in Java and hence I would like to call the graph functions by Java as well. Jython - which lets you invoke python modules with in Java was an option.I went on trying Jython to discover that it will not work in my case as the core code is in C and Jython wont support anything that is imported as a c dll in python code.I also thought of opting for the approach of calling graph routines directly in c. That is without passing through Python code. I am assuming there must be something which lets you call c code from Java, how ever I am not good in C hence I did not go for it. My last resort seems to execute Python interpreter from command line using Java. But that is a dirty and shameless. Also to deal with the results produced by Python code I will have to write the results in a file and read it back in java. Again dirty way. Is there something that any one can suggest me? Thanks to every one giving time. Thanks Igal for answering. I had a look at it. At first glance it appears as if it is simply calling the python script. Jep jep = new Jep(false, SCRIPT_PATH, cl); jep.set("query", query); jep.runScript(SCRIPT_PATH + file); jep.close(); Isnt it very similar to what we would do if called the python interpreter from command line through a Java code. Runtime runtime = Runtime.getRuntime(); Process proc = runtime.exec("python test.py"); Concern is how do I use the results generated by Python script. The naive way is to write them to file and read it back in Java. I am searching for a smarter approach.Thanks for suggestion anyway.

    Read the article

  • How does Java handle multithreading?

    - by badcodenotreat
    How does Java decide which core to assign a thread or a process? Is there any way to control that? to prevent two large threads from executing on the same core? Basically what I am asking is for further information on either how multi-threading works in Java, or how to control it within Java.

    Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >