Search Results

Search found 5133 results on 206 pages for 'max krug'.

Page 155/206 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

  • Why do manufacturers not show all hardware power usage?

    - by Drew
    I find it slightly more difficult to build a computer when I do not know how much power is needed for a component. When selecting a power supply for a computer, it is difficult to know how large of one to get. You don't want to go too large for cost reasons and circuit reasons, but you don't want to go too low and not be able to properly use every component. For instance, a graphics card might say "Minimum of a 500 Watt power supply. (Minimum recommended power supply with +12 Volt current rating of 30 Amps.)" But it really needs 360W (12V * 30A). So why don't they just say "Uses 360W max and xxxW peak"? Processors, I have noticed are good at reporting their power usage, but aside from processors and sometimes graphics cards, power usage is easily found. What is the power consumed by the Blu-ray / DVD drives? By the HDDs/SSDs? By the Mobo? etc. Why are these questions not easily answered when building a machine?

    Read the article

  • Weirdly high ping on direct ethernet connection?

    - by Antriel
    I bought new Lenovo IdeaCentre H430 pc and I'm having problem with high pings. Windows 7 with on-board realtek NIC. Fresh install, fully updated, drivers installed from included CD. When I start pinging router (direct 1Gb ethernet connection, 1 hop), pings start at <1ms (which is fine) and after a while they jump to 300-1000ms. I loaded up live ubuntu to test if the problem might be in HW. It's not, in ubuntu pings were always <1ms. I also noticed that when I start using connection somehow, pings go down to 1ms, but go back up when I stop using it (tested by accessing live camera feed on LAN). Power Options set to max performance. I disabled Interrupt Moderation on the NIC, didn't help. I tested it in the safe mode with networking, same problem there. It slows down our client-server based programs and I have no idea what's causing it. All I could google up was that disabling Interrupt Moderation would help, it didn't though. Anyone had similar problems? tl;nr: Computer is giving high pings to router when idle and normal pings when network is under load, it slows down our software significantly.

    Read the article

  • Two different subwoofers aren't working on my machine or my phone

    - by Philluminati
    I have speakers that come with my computer. Two small desktop speakers and a subwoofer with a base volume control on the back. It's worked for years. I was listening to Spotify on my speakers as loud they would possibly go and with the base turned up to max and suddenly the subwoofer stopped working. I've plugged the speakers into my Android HTC Desire Z handset and again, the desktop speakers play music but the subwoofer doesn't (even after fiddling with the volume control). So I figured I'd broken it. I went to Amazon and bought a replacement one. I bought this one: http://www.amazon.co.uk/dp/B002N46YD8/ref=pe_217191_31005151_dp_1 but it doesn't work either, on either my desktop nor my Android phone. I had a play with alsamixer and the LFE and center controls are switched on and the speakers are okay... but still no base. Am I unlucky enough to bought a new subwoofer which is already broken out of the box or is there something else which is wrong and I could look into please? Are there any other tests which I could perform to see if the problem is me or not?

    Read the article

  • Monitoring AWS Systems Behind ElasticBeanStalk

    - by A. Avadis
    So I'm getting a company set up in the Amazon Cloud -- creating IAAS protocol/solutions/standardized implementation, etc while also being the SysAdmin for individual systems, app environments, and day-to-day uptime. One of the biggest issues I'm having is tracking various system/application logs, as well as logging/monitoring/archiving system metrics like memory usage, cpu usage, etc etc In a centralized fashion. E.g. -- Nagios + Urchin. The BIGGEST impediment to my endeavors is the following: The company application is deployed in the form of a Java *.WAR file, uploaded to an Elastic BeanStalk application environment, load balancing and auto-scaling between 3(min) and 10(max) servers, and the EC2's that run the application are fired up and disposed of ad-hoc. That is to say, I can't monitor the individual EC2's for very long because so many are being terminated then auto-provisioned/auto-scaled on the fly -- so I'd constantly be having to "monitor what I'm monitoring", and continuously remove/add EC2 machine addresses to my monitoring lists. IS there some sort of way to use monitoring tools like Zabbix or Nagios to monitor the ElasticBeanStalk, and have it automatically add on new EC2's, and remove terminated/failed EC2's from its monitoring list automatically? Furthermore, is there anything I can do with GrayLog to achieve similar results with the aggregation/centralization of my application logs from multiple EC2 instances into ONE consolidated set of logs/events? If not GrayLog, is there ANYTHING LIKE GrayLog that can automatically detect what EC2 members are being added/removed from the environment, and collect the logs from them automatically? Any and all advice or direction is appreciated. Thanks much, and cheers!!

    Read the article

  • Why is MySQL table_cache full but never used

    - by Jeremy Clarke
    I have been using the tuning-primer.sh script to tune my my.cnf settings. I have most things working well but the part about TABLE CACHE makes no sense: TABLE CACHE Current table_cache value = 900 tables. You have a total of 0 tables You have 900 open tables. Current table_cache hit rate is 1% , while 100% of your table cache is in use. You should probably increase your table_cache When I do SHOW STATUS; I get the following table-related numbers: Open_tables = 900 Opened_tables = 0 It seems like something is going wrong. I have some extra memory I could use on increasing the table_cache size, but my sense is that the 900 tables already available aren't doing anything, and increasing it will just waste more energy. Why might this be happening? Are there other settings that could cause all my table_cache slots to be used even though there are no hits to them? I have 150 max connections and probably no more than 4 tables per join, FWIW. Here is the tuner script output for temp tables, which I've also been tuning: TEMP TABLES Current max_heap_table_size = 90 M Current tmp_table_size = 90 M Of 11032358 temp tables, 40% were created on disk Perhaps you should increase your tmp_table_size and/or max_heap_table_size to reduce the number of disk-based temporary tables. Note! BLOB and TEXT columns are not allow in memory tables. If you are using these columns raising these values might not impact your ratio of on disk temp tables.

    Read the article

  • Apache reverse proxy with VirtualHost not serving a page

    - by Mr Aleph
    I have an Apache reverse proxy set to move requests to a Tomcat Applet. The config is similar to: <VirtualHost 100.100.100.100:80> ProxyPass /AppName/App http://1.1.1.1/AppName/App ProxyPassReverse /AppName/App http://1.1.1.1/AppName/App </VirtualHost> I also have a page called summary.html that exists on 1.1.1.1 as: http://1.1.1.1/AppName/summary.html When I browse directly to it I have no problem viewing it, however if I try to get there via the reverse proxy I get a blank page. Wireshark shows me a 503, but this one is coming from the Apache reverse proxy (IP 100.100.100.100) and not the Tomcat (IP 1.1.1.1). Should I add http://1.1.1.1/AppName/ to the config? How? I tried it but I get a blank page, however this one shows on the URL bar of the browser the internal IP of the Tomcat, so, no go. Help is appreciated. Thanks. EDIT: This is the dump from Wireshark: GET /AppName/ HTTP/1.1 Host: 100.100.100.100 User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_8) AppleWebKit/534.52.7 (KHTML, like Gecko) Version/5.1.2 Safari/534.52.7 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Cache-Control: max-age=0 Accept-Language: en-us Accept-Encoding: gzip, deflate Connection: keep-alive HTTP/1.1 404 Not Found Date: Tue, 30 Jan 2012 09:08:51 GMT Server: Apache Content-Length: 1 Connection: close Content-Type: text/html; charset=iso-8859-1

    Read the article

  • Nginx map module 301 redirecting

    - by Reinier Korth
    I've rebuild my website in Ruby on Rails and now I want to 301 redirect a lot of old urls using Nginx's http://wiki.nginx.org/HttpMapModule For some reason I can't get it to work. It works fine without the rewrite ^ $new permanent; line. Does anyone see what I'm missing? This my nginx.conf: server { server_name example.com; return 301 $scheme://www.example.com$request_uri; } # 301 redirect list map $uri $new { /test123 http://www.example.com/test123; /bla http://www.example.com/bladiebla; } server { server_name www.example.com; rewrite ^ $new permanent; root example/public; location ^~ /assets/ { gzip_static on; expires max; add_header Cache-Control public; } try_files $uri/index.html $uri @unicorn; location @unicorn { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_pass http://unicorn-<%= application %>; } error_page 500 502 503 504 /500.html; client_max_body_size 4G; keepalive_timeout 10; }

    Read the article

  • Why is IIS 7.5 seeing some requests as HTTP/1.0?

    - by Zhaph - Ben Duguid
    While trying to work out why Static File Compression wasn't working on one of our IIS servers, the error was coming back as "NO_COMPRESSION_10" which translates to: Server not configured to compress 1.0 requests Looking at the requests in Fiddler, I can see that I'm requesting HTTP 1.1, but everything is being sent back as HTTP 1.0: Request (from chrome, captured via Fiddler): GET /css/reset.css HTTP/1.1 Host: [-----].com Connection: keep-alive Cache-Control: max-age=0 If-Modified-Since: Tue, 16 Oct 2012 15:04:34 GMT User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.11 (KHTML, like Gecko) Chrome/23.0.1271.95 Safari/537.11 Accept: text/css,*/*;q=0.1 Referer: http://[-----].com/ Accept-Encoding: gzip,deflate,sdch Accept-Language: en-GB,en;q=0.8,en-US;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Response from IIS: HTTP/1.0 200 OK Cache-Control: no-cache, no-store Pragma: no-cache Content-Type: text/html; charset=utf-8 Expires: -1 Server: Microsoft-IIS/7.5 X-AspNet-Version: 4.0.30319 X-Powered-By: ASP.NET Date: Tue, 11 Dec 2012 11:57:03 GMT Connection: close Content-Length: 108837 Other servers with the same host that I'm running this site on all respond with HTTP/1.1. How can I persuade IIS to respond with HTTP/1.1 rather than HTTP/1.0? Edit to add: Digging deeper, I can see that some responses from the server are indeed being returned compressed, so I guess really I'm trying to work out why talking to this particular server from our office seems to result in it seeing 1.0 requests, while other servers at the same co-loc don't?

    Read the article

  • Important hardware components to avoid bottlenecks/improve speed on a laptop?

    - by joelhaus
    Looking for a powerful general use (including web development) laptop running Windows. Price points seem to be all over the place. Many less powerful machines are priced much higher than machines with better specs. How does one navigate this market? Are there any unpublished/under-publicized specs/bottlenecks you look for? Understanding that hardware improves over time, is there an efficient ratio that can be used (or something similar, like Windows Experience Index?) which will indicate how powerful a system is? Thanks in advance! P.S. Here is an example from a laptop released on September 17, 2010. Can anyone pick apart these specs? Is there missing information you would be looking for? OS: Win 7 Display: 16.4" LED backlit Processor: Intel Core i7-740QM, 6MB L3 Cache RAM: 6GB DDR3 1333MHz (8GB max.) Graphics: NVIDIA GeForce GT 425M (1 GB of dedicated DDR3) HDD: 500GB 7200RPM SATA Hard Drive Removable Disc: Blue-ray with DVD±R/RW Misc: webcam/mic/speakers/bluetooth (via Sony Vaio VPC-F137FX/B)

    Read the article

  • Outlook locking network connection/session?

    - by HaydnWVN
    Scenario: We have an 'automatic orders' machine sat in the corner running XP with Outlook 2003. Its job is to check for new emails on a specific account, when it encounters one it checks the e-mail body for specific wording to determine which customer it is from (using a macro), then it checks the attachment for specific order codes before parsing the attachment to create a .csv file (which is then e-mailed onto one of the sales team) before importing the .csv into our bespoke ERP/Sales Order system to create an order. Problem: Periodically the machine will have symptoms of a lost network connection (unable to connect to any network source). Sometimes after several days, sometimes over a week. Volume of emails/orders processed does not seem to be linked. Additional info: The machines .pst is stored on a mapped network location. The .csv created is stored on a mapped network location. This is a workgroup, not a domain. All network drives are Samba shares from an Ubuntu fileserver. Our bespoke system runs from a database (MySQL) Ubuntu server. Our troubleshooting so far: I have switched machines (previous was Win2000) with the same symptoms. Restarting the machine FIXES the problem. Closing Outlook and then end tasking an Outlook.exe background process FIXES the problem. If you close Outlook, without end taking the background process, outlook will not reopen (saying it cannot find the pst file & it will not open any network location). Does Outlook have some kind of 'max session' linking it to network activity that is not closing after a mail request? Could Auto-archive be causing this? Is there a tool to check/display what each outlook.exe process is doing? Have not found many ways to troubleshoot this yet, as it is so infrequent...

    Read the article

  • plesk: how to configure reverse proxy rules properly?

    - by rvdb
    I'm trying to configure reverse proxy rules in vhost.conf. I have Apache-2.2.8 on Ubuntu-8.04, monitored by Plesk-10.4.4. What I'm trying to achieve is defining a reverse proxy rule that defers all traffic to -say- http://mydomain/tomcat/ to the Tomcat server running on port 8080. I have mod_rewrite and mod_proxy loaded in Apache. As far as I understand mod_proxy docs, entering following rules in /var/www/vhosts/mydomain/conf/vhost.conf should work: <Proxy *> Order deny,allow Allow from all </Proxy> ProxyRequests off RewriteRule ^/tomcat/(.*)$ http://mydomain:8080/$1 [P] Yet, I am getting a HTTP 500: internal server error when requesting above URL. (Note: I decided to use a rewrite rule in order to at least get some information logged.) I have made mod_rewrite log extensively, and find following entries in the logs [note: due to a limitation of max. 2 URLs in posts of new users, I have modified all following URLs so that they only contain 1 slash after http:. In case you're suspecting typos: this was done on purpose): 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) init rewrite engine with requested uri /tomcat/testApp/ 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (3) applying pattern '^/tomcat/(.*)$' to uri '/tomcat/testApp/' 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) rewrite '/tomcat/testApp/' - 'http:/mydomain:8080/testApp/' 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (2) forcing proxy-throughput with http:/mydomain:8080/testApp/ 81.241.230.23 - - [19/Mar/2012:16:42:59 +0100] [mydomain/sid#b06ab8][rid#1024af8/initial] (1) go-ahead with proxy request proxy:http:/mydomain:8080/testApp/ [OK] This suggests that the rewrite and proxy part is processed ok; still the proxied request produces a 500 error. Yet: Addressing the testApp directly via http:/mydomain:8080/testApp does work. The same setup does work on my local computer. Is there something else (Plesk-related, perhaps?) I should configure? Many thanks for any pointers! Ron

    Read the article

  • How to avoid index.php in Zend Framework route using Nginx rewrite

    - by Adam Benayoun
    I am trying to get rid of index.php from the default Zend Framework route. I think it should be corrected at the server level and not on the application. (Correct me if I am wrong, but I think doing it on the server side is more efficient). I run Nginx 0.7.1 and php-fpm 5.3.3 This is my nginx configuration server { listen *:80; server_name domain; root /path/to/http; index index.php; client_max_body_size 30m; location / { try_files $uri $uri/ /index.php?$args; } location /min { try_files $uri $uri/ /min/index.php?q=; } location /blog { try_files $uri $uri/ /blog/index.php; } location /apc { try_files $uri $uri/ /apc.php$args; } location ~ \.php { include /usr/local/etc/nginx/conf.d/params/fastcgi_params_local; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param SERVER_NAME $http_host; fastcgi_pass 127.0.0.1:9000; } location ~* ^.+\.(ht|svn)$ { deny all; } # Static files location location ~* ^.+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { expires max; } } Basically www.domain.com/index.php/path/to/url and www.domain.com/path/to/url serves the same content. I'd like to fix this using nginx rewrite. Any help will be appreciated.

    Read the article

  • AJP Connector Apache-Tomcat with php and java application

    - by Safari
    I have a question about proxy and ajp module. On my machine I have a Apache web server and a Tomcat servlet container. On Tomcat is running a my java webapplication. On Apache I have some services and I can call these in this way: http://myhos/service1 http://myhos/service2 http://myhos/service3 I would configurate a ajp connector to call my tomcat webapplication from Apache. I would somethin as http://myhost to call the Tomcat webapp. So, I configurated my apache in this way..and I have what I wanted: I can use http://myHost to visualize the Tomcat webApp by Apache. <VirtualHost *:80> ProxyRequests off ProxyPreserveHost On ServerAlias myserveralias ErrorLog logs/error.log CustomLog logs/access.log common <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /server-status ! ProxyPass /balancer-manager ! ProxyPass / balancer://mycluster/ stickysession=JSESSIONID nofailover=Off maxattempts=1 <Proxy balancer://mycluster> BalancerMember ajp://myIp:8009 min=10 max=100 route=portale loadfactor=1 ProxySet lbmethod=bytraffic </Proxy> <Location /balancer-manager> SetHandler balancer-manager Order deny,allow Allow from localhost </Location> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent </VirtualHost> But, now I can't use the apache services: If I use http://myhos/service1 I have an error because apache try to search service1 on my tomcatWebApp. Is there a way to fix it?

    Read the article

  • Apache https is slsow

    - by raucous12
    Hey, I've set apache up to use SSL with a self signed certificate. With http (KeepAlive off), I can get over 5000 requests per second. However, with https, I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

    Read the article

  • Completely unintuitive Apache/PHP memory-freeing behavior

    - by David
    Okay, this one's weird. I have a Turnkey Linux server with a gig of dedicated RAM. It's running WP3.2 with a boatload of plug-ins. It's a new site, so it has very limited traffic (other than search engines, maybe 20 hits a week). Now, for a few weeks, every few days, it would max out on main RAM, start eating up virtual RAM, and then crash. It's had this behavior for a while and I've been trying to figure out which element was causing the crash. Nine days ago, I pointed my external server monitor to this server. I wrote a 5-line HTML file (not PHP and not WP) that the server monitor accesses every minute, to see if the server is up. So, now, nine days later, the server has been rock solid, up all the time, no memory leak at all. I changed NOTHING on the server itself to see this behavior change. Have you EVER seen anything like this? All the server monitor is doing is retrieving a single, super-simple HTML file and all the memory leak problems have gone away. Weird, eh?

    Read the article

  • How to debug modsecurity_audit_log

    - by max87
    I was accessing www.example.com/RestAPI/index.php/tweets.json in my server. The modsec_audit.log showed the following error, but there is no related errors/warnings in modsec_debug.log. I could see the Internal Server error is logged in example-error_log. How can I debug this Internal Server error? --8560e90b-A-- [21/Mar/2012:07:01:52 +0000] T2l84H8AAAEAAGxPZ@QAAAAG x.x.x.x 33101 x.x.x.x 80 --8560e90b-B-- GET /RestAPI/index.php/tweets.json HTTP/1.1 Host: www.example.com User-Agent: Mozilla/5.0 (X11; Linux i686; rv:11.0) Gecko/20100101 Firefox/11.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,/;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip, deflate DNT: 1 Cookie: __utma=159129855.1463065063.1331789485.1331789485.1331789485.1; __utmz=159129855.1331789485.1.1.utmcsr=(direct)|utmccn=(direct)|utmcmd=(none); 8cb6a414cf5ec1919864de0e80bea4da=0es7dcu0p10cocfpferb2lddi0; 8926e4f3c475bb6fcacb409299f1bd27=53cf8c5e6bf78ea45096945377e6d609 Connection: keep-alive Cache-Control: max-age=0 --8560e90b-F-- HTTP/1.0 500 Internal Server Error X-Powered-By: PHP/5.3.5 Content-Length: 0 Connection: close Content-Type: text/html; charset=UTF-8 --8560e90b-H-- Apache-Handler: php5-script Stopwatch: 1332313312358005 130428 (- - -) Producer: ModSecurity for Apache/2.5.12 (http://www.modsecurity.org/); core ruleset/2.0.5. Server: Apache --8560e90b-Z--

    Read the article

  • i7 Windows 7 laptop or Macbook Pro 15" (For making 3D model and Animation)

    - by sppdhs
    Hi everyone, I'm thinking of buying a new laptop as my current one will be 5 years old next year and it currently gives me a blue screen everytime I run a heavy software to make 3D models and animation. Question is: Should I buy Macbook Pro or a Windows 7 laptop? I tried to research and some say that Windows would be better, especially because you can buy a very high spec laptop with cheaper price. While some other say Macbook Pro is the better choice as it can run bootcamp with windows 7 100% performance on every software even though it's a mac. Is this true? Which one is actually better? Btw, the software that I usually use is 3Ds Max, Maya, and ZBrush. To note as well, I have never used a Mac before. I've checked around some stores and budget wise, I'll need around AU$3000+ to buy a Macbook pro, and AU$2000+ to buy a windows laptop. Quite a big difference in price range. Thanks in advance for your help.

    Read the article

  • Can't get DNS Alias work on Ubuntu 10.04 with Apache 2

    - by Johnny
    I want to use the DNS Alias to configure one of my domain pointing to a specific directory on the server. Here is what I've done: Change the IP address in domain setting, and it works $ ping www.example.com PING example.com (124.205.62.xxx): 56 data bytes 64 bytes from 124.205.62.xxx: icmp_seq=0 ttl=48 time=53.088 ms 64 bytes from 124.205.62.xxx: icmp_seq=1 ttl=48 time=52.125 ms ^C --- example.com ping statistics --- 2 packets transmitted, 2 packets received, 0.0% packet loss round-trip min/avg/max/stddev = 52.125/52.606/53.088/0.482 ms Add sites-available and sites-enabled $ ls -l /etc/apache2/sites-available/ total 16 -rw-r--r-- 1 root root 948 2010-04-14 03:27 default -rw-r--r-- 1 root root 7467 2010-04-14 03:27 default-ssl -rw-r--r-- 1 root root 365 2010-06-09 18:27 example.com $ ls -l /etc/apache2/sites-enabled/ total 0 lrwxrwxrwx 1 root root 26 2010-06-09 15:46 000-default -> ../sites-available/default lrwxrwxrwx 1 root root 33 2010-06-09 18:17 001-example.com -> ../sites-available/example.com But it doesn't work and when I open the browser for www.example.com, it shows an 111 error: The following error was encountered: Connection to 124.205.62.48 Failed The system returned: (111) Connection refused Here is how example.com's config: $ cat /etc/apache2/sites-enabled/001-example.com <virtualhost *:80> DocumentRoot "/vhosts/example.com/htdocs/" ServerName www.example.com ServerAlias example.com <Location /> Order Deny,Allow Deny from None Allow from all </Location> #Include /etc/phpmyadmin/apache.conf ErrorLog /vhosts/example.com/logs/error.log CustomLog /vhosts/example.com/logs/access.log combined Could you please tell me how to solve this?

    Read the article

  • What's going on with traceroute?

    - by Kevin
    The following is what happens when I run traceroute from a certain location: # traceroute google.com traceroute to google.com (74.125.227.39), 30 hops max, 60 byte packets 1 gateway.local.enactpc.com (10.0.0.1) 0.138 ms 0.101 ms 0.084 ms 2 * * * 3 * * * 4 * * * 5 * * * 6 * * * 7 * * * 8 * * * 9 * * * 10 * * * 11 * * * 12 * * * 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * * * 20 * * * 21 * * * 22 * * * 23 * * * 24 * * * 25 * * * 26 * * * 27 * * * 28 * * * 29 * * * 30 * * * Absolutely nothing of interest... Now, originally I thought this was just a fact of the location's network set up. (I assume they block pings or something...) However, watch what happens when I use nmap to run a traceroute... # nmap -sP --traceroute google.com Starting Nmap 5.21 ( http://nmap.org ) at 2012-09-25 22:18 CDT Nmap scan report for google.com (74.125.227.40) Host is up (0.034s latency). Hostname google.com resolves to 11 IPs. Only scanned 74.125.227.40 rDNS record for 74.125.227.40: dfw06s06-in-f8.1e100.net TRACEROUTE (using proto 1/icmp) HOP RTT ADDRESS 1 0.19 ms gateway.local.enactpc.com (10.0.0.1) 2 1.93 ms 99-20-92-1.lightspeed.austtx.sbcglobal.net (99.20.92.1) 3 25.61 ms 99-20-92-2.lightspeed.austtx.sbcglobal.net (99.20.92.2) 4 ... 6 7 23.68 ms 12.83.68.137 8 31.30 ms gar23.dlstx.ip.att.net (12.122.85.73) 9 ... 10 31.82 ms 72.14.233.65 11 32.27 ms 209.85.250.77 12 32.98 ms dfw06s06-in-f8.1e100.net (74.125.227.40) Nmap done: 1 IP address (1 host up) scanned in 3.29 seconds When using nmap I get A LOT more results than with traceroute, why? Note, I checked, and the difference in target IP addresses is not related...

    Read the article

  • Samba share will not connect (was working yesterday)

    - by David Gard
    I have a CentOS websver with a Samba share set up (\\webserver\websites). I was connected to this share just yesterday without issue, but today my Windows 8 PC will not connect to it. I've also tried making a connection from Windows 7 and Windows XP, all without success. I initially tried restarting my computer, but that did not work. I then tried restarting the Samba service on the webserver (service smb restart), and when that failed I restarted the webserver. All of that was to no avail, and I still cannot connect to the share. The webserver is contactable from my PC (and the others I tried), as the websites it hosts work fine and I'm able to Putty to the server. When connected to the webserver, I can see that Samba is running by using service smb status - service smb status smbd (pid 4685) is running... nmbd (pid 4688) is running... Can anyone please help me to get this share working? Here is my full Samba config (/etc/samba/smb.conf) - [global] workgroup = MYGROUP server string = Samba Server %v log file = /var/log/samba/log.%m max log size = 50 security = user encrypt passwords = yes socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 local master = no [websites] comment = Websites browseable = yes writable = yes path=/var/www/html/ valid users = dgard

    Read the article

  • Why am I seeing Zero errors in non-ECC RAM?

    - by Alexander Shcheblikin
    According to sources, memory errors are a very probable event: Some say the probability of a DRAM error is 95% in just 3 days of operation of a computer with just 4 GB of RAM, others say 32% of servers experience at least one error in a month with 8% of DIMMs being at fault. Contrary to those horrors, in my more than 10 years of personal computers use I have seen exactly none of the memory errors. I admit I never paid special attention to the subject. However, I have ventured multi-hour memtest86 runs couple of times and never seen an error either. Some of the factors that IMO should aggravate the memory problems: I build my computers out of the most "bulk commodity" parts: mainstream budget motherboards and the next to cheapest memory. also I usually max out the technology available, e.g. in the times of 32 bit OS'es I used 4 GB of RAM and with the current desktop CPUs and the newer 64 bit OS'es I use 32 GB of RAM. memory usage is moderately heavy with lots of virtual machines up running small and big tasks 24/7/365. But nevertheless, no memory-related problems ever found! How's that?

    Read the article

  • How can I "filter" postfix-generated bounce messages?

    - by Flimzy
    We are using postfix 2.7 and custom SMTPD (based on qpsmtpd) in highly customized configuration for spam filtering. We have a new requirement to filter postfix-generated bounces through our custom qpsmtpd process (not so much for content filtering, but to process these bounces accordingly). Our current configuration looks (in part) like this: main.cf (only customizations shown): 2526 inet n - - - 0 cleanup pickup fifo n - - 60 1 pickup -o content_filter=smtp:127.0.0.2 Our smtpd injects messages to postfix on port 2526, by speaking directly to the cleanup daemon. And the custom pickup command instructs postfix to hand off all locally-generated mail (from cron, nagios, or other custom scripts) to our custom smtpd. The problem is that this configuration does not affect postfix generated bounce messages, since they do not go through the pickup daemon. I have tried adding the same content_filter option to the bounce daemon commands, but it does not seem to have any effect: bounce unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 defer unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 trace unix - - - - 0 bounce -o content_filter=smtp:127.0.0.2 For reference, here is my main.cf file, as well: biff = no # TLS parameters smtpd_tls_loglevel = 0 smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache smtp_tls_security_level = may mydestination = $myhostname alias_maps = proxy:pgsql:/etc/postfix/dc-aliases.cf transport_maps = proxy:pgsql:/etc/postfix/dc-transport.cf # This is enforced on incoming mail by QPSMTPD, so this is simply # the upper possible bound (also enforced in defaults.pl) message_size_limit = 262144000 mailbox_size_limit = 0 # We do our own message expiration, but if we set this to 0, then postfix # will try each mail delivery only once, so instead we set it to 100 days # (which is the max postfix seems to support) maximal_queue_lifetime = 100d hash_queue_depth = 1 hash_queue_names = deferred, defer, hold I also tried adding the internal_mail_filter_classes option to main.cf, but also tono affect: internal_mail_filter_classes = bounce,notify I am open to any suggestions, including handling our current content-filtering-loop in a different way. If it's not clear what I'm asking, please let me know, and I can try to clarify.

    Read the article

  • Simple electric DC question. Currency consumption

    - by Bobb
    Suppose you have DC power supply and a consumer connected to it (i.e. computer PSU and a hard drive). Suppose PSU which was supplied with the consumer has output 5V 1A. So I assume that the consumer should not consume more than 1A. Suppose the original PSU is broken now and I want to replace it with the one I have which is 5V 10A. My guess is that current is something which depends on the consumer. So if the consumer consumes normally 1A then it will not consume more than that even if it is connected to 10A PSU. In other word - am I right assuming that the consumer will not burn out being connected to a power supply with higher current output? P.S. my understanding is that voltage is something independent from the consumer. If you give it higher voltage it will burn (voltage is from PSU to the consumer). However current must be in opposite - consumer sucks as much current as it need not as much as PSU can provide (of course given that max PSU current is greater than the consumer needs)

    Read the article

  • How can the route between two private IPs go via public IPs?

    - by Gilles
    I'm trying to understand what this output from traceroute means. I changed the IP addresses for privacy but retained the public/private IP range distinction. traceroute.db -e -n 10.1.1.9 traceroute to (10.1.1.9), 30 hops max, 60 byte packets 1 10.0.0.1 0.596 ms 0.588 ms 0.577 ms 2 10.0.0.2 1.032 ms 1.029 ms 1.084 ms 3 10.0.0.3 3.360 ms 3.355 ms 3.338 ms 4 23.0.0.4 3.974 ms 4.592 ms 4.584 ms 5 23.0.0.5 13.442 ms 13.445 ms 13.434 ms 6 45.0.0.6 13.195 ms 12.924 ms 12.913 ms 7 67.0.0.7 52.088 ms 51.683 ms 52.040 ms 8 10.1.1.8 46.878 ms 44.575 ms 44.815 ms 9 10.1.1.9 45.932 ms 45.603 ms 45.593 ms The first 10.0.* range is inside my organisation. The last 10.1.* range is another site of my organisation. The intermediate addresses belong to various ISPs. I expect that there is some kind of VPN between the two sites, but I don't know much about our network topology. What I don't understand is how the route can go from a private address through public addresses back into private addresses. Searching led me to Public IPs on MPLS Traceroute, which gives a possible explanation: MPLS. Is MPLS the only possible or most likely explanation? Otherwise what does this tell me about our network infrastructure? Bonus question for my edification: in this scenario, who is generating the ICMP TTL exceeded packets and if relevant mangling their source and destination addresses?

    Read the article

  • sysbench memory test on ec2 small instance

    - by caribio
    I'm seeing a problem with sysbench memory test (the default version that's compiled in). This is on Ubuntu Maverick, sysbench installed via apt-get install sysbench. Running the same thing on Ubuntu @ Rackspace worked just as expected. While the CPU and I/O tests worked fine on EC2 servers, the memory test just runs without doing anything (notice the 0M in the test results). The instance used was the publicly available 'stock' Ubuntu image with no changes to it: ./ec2-run-instances ami-ccf405a5 --instance-type m1.small --region us-east-1 --key mykey Supplying more arguments (such as: --memory-block-size=1K --memory-total-size=102400M) didn't help. What am I doing wrong? Thanks. sysbench --num-threads=4 --test=memory run sysbench 0.4.12: multi-threaded system evaluation benchmark Running the test with following options: Number of threads: 4 Doing memory operations speed test Memory block size: 1K Memory transfer size: 0M Memory operations type: write Memory scope type: global Threads started! Done. Operations performed: 0 ( 0.00 ops/sec) 0.00 MB transferred (0.00 MB/sec) Test execution summary: total time: 0.0003s total number of events: 0 total time taken by event execution: 0.0000 per-request statistics: min: 18446744073709.55ms avg: 0.00ms max: 0.00ms Threads fairness: events (avg/stddev): 0.0000/0.00 execution time (avg/stddev): 0.0000/0.00

    Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >