Search Results

Search found 17317 results on 693 pages for 'memory upgrade'.

Page 155/693 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

  • S5000XVN Intel Motherboard - Only sees 12 out of 16GB of RAM

    - by Richie086
    So I have an older Intel S5000XVN motherboard, here are the specs CPU Arch : 2 CPU - 2 Cores - 2 Threads CPU PSN : Intel Xeon CPU 5160 @ 3.00GHz CPU EXT : MMX, SSE (1, 2, 3, 3S), EM64T, VT-x CPUID : 6.F.6 / Extended : 6.F CPU Cache : L1 : 2 x 32 / 2 x 32 KB - L2 : 4096 KB Core : Woodcrest (65 nm) / Stepping : B2 Freq : 2985.21 MHz (331.69 * 9) MB Brand : Intel MB Model : S5000XVN NB : Intel 5000X rev 31 SB : Intel 6321ESB rev 09 RAM : 16384 MB FB-DDR2 RAM Speed : 331.7 MHz (1:1) @ N/A Slot 1 : 2048MB (5300) Slot 1 Manufacturer : Kingston Slot 2 : 2048MB (5300) Slot 2 Manufacturer : Qimonda Slot 3 : 2048MB (5300) Slot 3 Manufacturer : Kingston Slot 4 : 2048MB (5300) Slot 4 Manufacturer : Qimonda Slot 5 : 2048MB (5300) Slot 5 Manufacturer : Kingston Slot 6 : 2048MB (5300) Slot 6 Manufacturer : Qimonda As you can clearly see, CPU-Z says I have 16GB of PC2-5300 RAM installed. For some reason in both BIOS and in Windows the maximum usable RAM is 12GB instead of 16GB. I have a dedicated video card connnected, so it can't be stealing RAM to use for the GPU (the S5000XVN does not have any onboard video). I am running Windows Server 2008 R2 x64 as the primary OS - so there should not be a memory limitation imposed on me from the OS. Has anyone experienced this before? Any ideas on how I can actually use all 16GB of RAM? I plan on using this machine to use for a Hyper-V server and have x2 Quad Core Xeon CPUs on the way as I write this post.

    Read the article

  • Access violations on Windows 2008 VPS

    - by James Hay
    I'm running a Windows 2008 VPS with 2GB RAM. I'm trying to install hMailServer on the VPS but when I get to the "choose installation directory" dialog I get error messages that keep popping up and make it so that I cannot continue. As soon as the dialog opens I get these two errors: "Access violation at address 73F53560. Read of addresss 00000014." "Access violation at address 73EEBE21. Read of addresss 00000018." Once I close these it frees up again but as soon as I click "Browse.." (to choose the directory) I get the following errors repeatedly that reopen if I close them. "Access violation at address 73F0E371. Read of address 00000014." "Access violation at address 73F4A006. Read of address 00000000." I have no idea how to fix these. I can't run memory diagnostics, I assume because it's a VPS and not an actual server.

    Read the article

  • How to make a huge ram drive?

    - by Brandon Moore
    At my old job when a report was needed I could sit down with someone and pull up results and get immediate feedback, and then refine my queries and ultimately have the data we needed, in the format we needed within 30-90 minutes. I just started working for a new company with a database containing millions of records and I spent my whole 8 hours making a report that I feel I could have made in less than 2 hours if it were not for the massive amount of data the queries are working with, and the fact that I couldn't ask the person needing the data to sit down with me and give me feedback as I pulled up results as I am used to. So I am trying to think of how we can make the server faster... much faster, so that I can have the same level of productivity I'm used to. One thought that just came to mind is that memory is so cheap these days, and by my calculations I could buy 10 8gig ram sticks for 1000 bucks. What I have never heard of though is a device that would let me combine these into a huge ram drive. So I'd like to know if any such device exists, and if not what is the largest ram drive I could realistically make and how would I go about doing so? EDIT: To you guys who are saying the database shema needs to be analyzed... you can't make a query such as "Select f1, f2, f3, etc from SomeTable" run any faster by normalizing or indexing the table. What I'm talking about IS ABSOLUTELY a need for improved performance at the hardware level. I am used to having results come back to me in a few seconds, not a few minutes or much less a half an hour. Maybe that's what you guys are used to who have 100 billion record tables and you feel like that's fast, but I'm looking for results back from tables with about 10 million records to come back to me withing less than half a minute TOPS.

    Read the article

  • Recovering a damaged microSDHC

    - by djechelon
    I just bought from eBay a Kingston 32GB microSDHC that was advertised as defective. The seller said that there could be formatting problems or with transfer of large files. Unfortunately, when I got it, it was a total mess. My Nikon camera doesn't read it at all (OK, maybe it doesn't support 32GB) My Linux laptop doesn't mount it: can't read superblock The same laptop refuses to mkfs.msdos because it failed whilst writing reserved sector The same laptop, under Windows, doesn't read nor format the card HTC HD2 mounts the MMC, allows me to write via USB, but is unable to open the just written files OK, folks, now you would say I would have to go through Paypal complaint... that's not that easy. I consciously bought a half-price card that was known to show some defects, and Paypal complaints take time. Obviously, I can't accept somebody sold me a completely use-less computer decoration. So I'll keep it as last option. My question is Do you know a way, under either Linux or Windows, to thoroughly scan, test and possibly repair memory cards, even if I have to lose some percentage of space because of bad sectors? If I can keep at least half of the card intact it would certainly be fine. I used to do broken sector marking with hard disks in the past. I almost forgot: MONSTR:/home/djechelon # fsck /dev/mmcblk0p1 fsck from util-linux-ng 2.17.2 dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN Read 512 bytes at 0:Input/output error

    Read the article

  • How can I get my Web API app to run again after upgrading to MVC 5 and Web API 2?

    - by Clay Shannon
    I upgraded my Web API app to the funkelnagelneu versions using this guidance: http://www.asp.net/mvc/tutorials/mvc-5/how-to-upgrade-an-aspnet-mvc-4-and-web-api-project-to-aspnet-mvc-5-and-web-api-2 However, after going through the steps (it seems all this should be automated, anyway), I tried to run it and got, "A project with an Output Type of Class Library cannot be started directly" What in Sam Hills Brothers Coffee is going on here? Who said this was a class library? So I opened Project Properties, and changed it (it was marked as "Class Library" for some reason - it either wasn't yesterday, or was and worked fine) to an Output Type of "Windows Application" ("Console Application" and "Class Library" being the only other options). Now it won't compile, complaining: "*Program 'c:\Platypus_Server_WebAPI\PlatypusServerWebAPI\PlatypusServerWebAPI\obj\Debug\PlatypusServerWebAPI.exe' does not contain a static 'Main' method suitable for an entry point...*" How can I get my Web API app back up and running in view of this quandary? UPDATE Looking in packages.config, two entries seem chin-scratch-worthy: <package id="Microsoft.AspNet.Providers" version="1.2" targetFramework="net40" /> <package id="Microsoft.Web.Infrastructure" version="1.0.0.0" targetFramework="net40" /> All the others target net451. Could this be the problem? Should I remove these packages? UPDATE 2 I tried to uninstall the Microsoft.Web.Infrastructure package (its description leads me to believe I don't need it; also, it has no dependencies) via the NuGet package manager, but it tells me, "NuGet failed to install or uninstall the selected package in the following project(s). [mine]" UPDATE 3 I went through the steps in again, and found that I had missed one step. I had to change this entry in the Application web.config File : <dependentAssembly> <assemblyIdentity name="System.Web.Mvc" publicKeyToken="31bf3856ad364e35" /> <bindingRedirect oldVersion="1.0.0.0-5.0.0.0" newVersion="5.0.0.0" /> </dependentAssembly> (from "4.0.0.0" to "5.0.0.0") ...but I still get the same result - it rebuilds/compiles, but won't run, with "A project with an Output Type of Class Library cannot be started directly" UPDATE 4 Thinking about the err msg, that it can't directly open a class library, I thought, "Sure you can't/won't -- this is a web app, not a project. So I followed a hunch, closed the project, and reopened it as a website (instead of reopening a project). That has gotten me further, at least; now I see a YSOD: Could not load file or assembly 'System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified. UPDATE 5 Note: The project is now (after being opened as a web site) named "localhost_48614" And...there is no longer a "References" folder...?!?!? As to that YSOD I'm getting, the official instructions (http://www.asp.net/mvc/tutorials/mvc-5/how-to-upgrade-an-aspnet-mvc-4-and-web-api-project-to-aspnet-mvc-5-and-web-api-2) said to do this, and I quote: "Update all elements that contain “System.Web.WebPages.Razor” from version “2.0.0.0” to version“3.0.0.0”." UPDATE 6 When I select Tools Library Package Manager Manage NuGet Packages for Solution now, I get, "Operation failed. Unable to locate the solution directory. Please ensure that the solution has been saved." So I save it, and it saves it with this funky new name (C:\Users\clay\Documents\Visual Studio 2013\Projects\localhost_48614\localhost_48614.sln) I get the Yellow Strip of Enlightenment across the top of the NuGet Package Manager telling me, "Some NuGet packages are missing from this solution. Click to restore from your online package sources." I do (click the "Restore" button, that is), and it downloads the missing packages ... I end up with the 30 packages. I try to run the app/site again, and ... the erstwhile YSOD becomes a compilation error: The pre-application start initialization method Start on type System.Web.Mvc.PreApplicationStartCode threw an exception with the following error message: Could not load file or assembly 'System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.. Argghhhh!!! (and it's not even talk-like-a-pirate day).

    Read the article

  • VMWare Workstation Linux Host performance tuning

    - by Hoghweed
    I need to improve my linux hosted vmware workstation for using multiple virtual machines at the same time. I feel very stupid I lost a great blog post link which I found last month (and I'm not able to find it again..) so I try to ask here if anyone can help me: This is my host (laptop): 16GB DDR3 Ram HDD Hybrid 750GB 7200 (8GB SSD Cache) Mint 15 x64 Kernel 3.9.7 swappiness set to 10 The above are the important things about the host. So, My need is the ability to run 2 or 3 VMs at the same time. The lack of performance is about the disk, The last time from that blog post I lost, I setup /tmp to be mounted ad a memory partition and in my previous installation that was good, now I'm not able to find a good solution to tweak the things. I think with 16GB o RAM there will be no problems to run multiple VMs, but whe they start to swap or use the /tmp things going bad (guest cursor going too fast after a freeze, guest freeze and so on) Anyone can help me to fit a good host tweak and configuration to get better performance? Thanks in advance

    Read the article

  • How to calculate RAM value on performance per dollar spent

    - by Stucko
    Hi, I'm trying to make decisions on buying a new PC. I have most specifications (processor/graphic card/hard disk) pin-downed except for RAM. I am wondering what is the best RAM configuration for the amount of money I'm spending. As the question of best is subjective, I'd like to know how would I calculate the value of RAM sticks sold. 1.(sample)The value of amount of memory: 1) CORSAIR PC1333 D3 2GB = costs $80 2) CORSAIR PC1333 D3 4GB = costs $190 would it be better to buy 2 of item 1) instead of 1 of item 2) ?? Although I would normally choose to have 1 of 2) as the difference is only (190-(80*2)) = 30 as I would save 1 DIMM slot, What I need is the value per amount: 1) 80/ 2 = $40 per 1GB 2) 190/ 4 = $47.5 per 1GB 2. The value of frequency: 1) CORSAIR PC1333 4GB = costs 190 2) CORSAIR PC1600C7 4GB = costs 325 Im not even sure of the denominator ... $ per 1 ghz speed? 3. The value of latency: 1) CORSAIR CMP1600C8 8-8-8-24 2GBx3 (triple channel) = costs 589 2) CORSAIR CMP1600C7D 7-7-7-20 2GBx3 (triple channel) = costs 880 Im not even sure of the denominator ... $ per 1 ghz speed? Just for your information i'd like to get the best out of the money im going to spend to put on a 6 DIMM slot i7core motherboard.

    Read the article

  • Why isn't 'Low Fragmentation Heap' LFH enabled by default on Windows Server 2003?

    - by James Wiseman
    I've been investigating an issue with a production Classic ASP website running on IIS6 which seems indicative of memory fragmentation. One of the suggestions of how to ameliorate this came from Stackoverflow: How can I find why some classic asp pages randomly take a real long time to execute?. It suggested flipping a setting in the site's global.asa file to 'turn on' Low Fragmentation Heap (LFH). The following code (with a registered version of the accompanying DLL) did the trick. Set LFHObj=CreateObject("TURNONLFH.ObjTurnOnLFH") LFHObj.TurnOnLFH() application("TurnOnLFHResult")=CStr(LFHObj.TurnOnLFHResult) (Really the code isn't that important to the question). An author of a linked post reported a seemingly magic resolution to this issue, and, reading around a little more, I discovered that this setting is enabled by default on Windows Server 2008. So, naturally, this left me a little concerned: Why is this setting not enabled by default on 2003, or If it works in 2008 why have Microsoft not issued a patch to enable it by default on 2003? I suspect the answer to the above is the same for both (if there is one). Obviously, we're testing it in a non-production environment, and doing an array of metrics and comparisons to deem if it does help us. But aside from this I'm really just trying to understand if there's any technical reason why we should do this, or if there are any gotchas that we need to be aware of.

    Read the article

  • Disadvantages of enabling 'Low Fragmentation Heap' LFH on Windows Server 2003?

    - by James Wiseman
    I've been investigating an issue with a production Classic ASP website running on IIS6 which seems indicative of memory fragmentation. One of the suggestions of how to ameliorate this came from Stackoverflow: How can I find why some classic asp pages randomly take a real long time to execute?. It suggested flipping a setting in the site's global.asa file to 'turn on' Low Fragmentation Heap (LFH). The following code (with a registered version of the accompanying DLL) did the trick. Set LFHObj=CreateObject("TURNONLFH.ObjTurnOnLFH") LFHObj.TurnOnLFH() application("TurnOnLFHResult")=CStr(LFHObj.TurnOnLFHResult) (Really the code isn't that important to the question). An author of a linked post reported a seemingly magic resolution to this issue, and, reading around a little more, I discovered that this setting is enabled by default on Windows Server 2008. So, naturally, this left me a little concerned: Why is this setting not enabled by default on 2003, or If it works in 2008 why have Microsoft not issued a patch to enable it by default on 2003? I suspect the answer to the above is the same for both (if there is one). Obviously, we're testing it in a non-production environment, and doing an array of metrics and comparisons to deem if it does help us. But aside from this I'm really just trying to understand if there's any technical reason why we should do this, or if there are any gotchas that we need to be aware of.

    Read the article

  • Loading a big database dump into PostgreSQL using cat

    - by RussH
    I have a pair of very large (~17 GB) database dumps that I want to load into postgresql 9.3. After installing the database packages, learning more or less how to use them, and fiddling around a little on various StackExchange pages (particularly this question), it looks like a proper command for me to use is something like: cat mydb.pgdump | psql mydb because of the format the dump is in. My machine has 16 GB of RAM, and I'm not familiar with the cat command but I do know that my RAM is 99% exhausted and the database is taking a while to load. My machine isn't non-responsive to the point of hanging; I can run other commands in other terminal windows and have them execute at a reasonable clip, but I am wondering if cat is the best way to pipe in the file or if something else is more efficient? My concern is that maybe cat could be using up all the RAM so the database doesn't have much to work with, throttling its performance. But I'm new to thinking about RAM issues like this and don't know if I'm worrying about nothing. Now that I think about it, this seems to be more of a question about cat and its memory usage than anything else. If there is a more appropriate forum for this question please let me know. Thanks!

    Read the article

  • Two Firefox windows vs two browsers? Ram Consumption

    - by Kayle
    I don't know enough about Ram & sharing to know what the difference is here. Normally, I run Chrome in one desktop for personal use, and Firefox on a second desktop for business. I like the separation of saved passwords and whatnot. However, I recently learned that I can open two different profiles in Firefox at the same time, so I was wondering if that would be cheaper to my system resources, or not? Out the door, I don't think it would save more than 40-60mb of ram... but I'm wondering, 3 hours later, if ram handling will be better using just one browser for all my heavy lifting. I only have 2gb of ram and I run iTunes and Photoshop as well, almost all day. So I like to save ram where I can. Any thoughts? UPDATE: I've been centering around chrome more recently and using firefox for testing. Dev isn't bad on Chrome and it's great at releasing memory when I close tabs. In retrospect, I think the best answer to this question is simply for me to buy another 2gb of ram.

    Read the article

  • Ubuntu server crashes; need help figuring how to figure out why

    - by neezer
    I have a 768 Slice at slicehost.com running Ubuntu Server 8.04.2 LTS (hardy) with a LAMP stack on it that periodically crashes, though why I am not sure. From what I can tell, there is a process that basically goes rogue and consumes all the memory on the slice, suffocating all the other programs running until the whole thing comes to a grinding halt, and I have to do a hard reboot of the slice to get it back up and running again. I can't detect any pattern for this (it seems to happen about once a month, more or less). Here's a screenshot of my console during the last crash: I would assume that a possible cause might a PHP script or an apache configuration rule that might cause the crash if triggered? How would I be able to find out which one is the offending one? I've checked and rechecked all my PHP scripts, and running them doesn't seem to trigger the crash. I've also been able to log on to my system during a crash and see what's running (with top), but I can't tell how the offending process was started, so I can't trace the root of the problem! I know my description is overly generic, but unfortunately my expertise in tracking down the source of these glitches is very limited. If you need any additional information about my system in order to help me figure this out, please let me know in the comments, and I will append it to the question. My only other lead as to the culprit here is Wordpress, which we have installed on this server. Here are the details: Wordpress 3.0.3 with the following plugins installed and activated: Addmarx - Bookmark/Share/Email Dropdown, Akismet, All in One SEO Pack, Animated Banners, Automatically publish highlights of any website, directly to your Blog, Broken Link Checker, CMS Dashboard, Collapsing Categories, Status Updater, SubHeading, Ultimate Google Analytics, VastSubCat, WP-CMS Post Control, and WP Super Cache

    Read the article

  • When modern computers boot, what initial setup of RAM do they execute, and how does it exactly work?

    - by user272840
    I know the title reeks of confusion, and some of you might assume I am just wondering about how the computer boots in general, but I'm not. But I'll sort this out for you people now: 1.Onboard firmware is how mostly all modern computer devices work, whether or not with EFI/UEFI(even without "onboard firmware", older computers still employed bank switching, or similar methods with snap-in firmware, cartridges, etc.) 2.On startup there is no "programs" running in the traditional sense yet, i.e. no kernel, OS, user-applications; all of the instructions, especially the very first instruction, is specified by the Instruction Pointer, I am guessing. How is the IP/PC/etc. set to first point to an address for a BIOS/firmware/etc. instruction, and how do the BIOS instructions map themself out in memory prior to startup? 3.Aside from MMIO, BIOS uses certain RAM addresses to have instructions. The big ? comes in when I ask this ... how does BIOS do this? Conclusion: I am assuming that with the very first instruction there is an initial hardware setup for BIOS prior to complete OS bootup. What I want to know is if it's hardware engineered to always work this way, if there's another step in this bootup method I am missing, a gap of information I am unaware of, or how this all works from the very first instruction, and the RAM data itself.

    Read the article

  • How To Boot with "mem=1024m" Argument using GRUB - Ubuntu 10.04

    - by nicorellius
    I am still working on this question. This new one is a different question so I thought it would be good to post a new question. Is this the proper protocol or should I have just edited the other question? I'm running Ubuntu 10.04 with the kernel 2.6.32-22-generic on a Toshiba Satellite laptop. When I enter the GRUB menu (I have Ubuntu 9.10 installed as well), I can choose which kernel to boot. I use scroll down to the one I want and press "e" and I expect to be able to enter mem=1024m and force the kernel to use this much memory. But when I run cat /proc/meminfo or look in the process manager after booting wth this argument I still see all the RAM: ~2 GB. Am I using this boot argument incorrectly? The boot configuration (before I add anything) looks like this: insmod ext2 set root=(hd0,1) search --no-floppy --fs-uuid --set 10270f21-1c42-494b-bd3f-813c23f6d\ 518 linux /boot/vmlinuz-2.6.32-22-generic root=UUID=10270f21-1c42-494b-b\ d3f-813c23f6d518 ro quiet splash initrd /boot/initrd.img-2.6.32-22-generic The way I did this was that I added the mem=1024m after the last line and pressed Ctrl+x (Emacs save and boot the kernel) and the system booted. I tried adding mem=1024m to the end and the beginning of this list and it appeared to not change the RAM allocation.

    Read the article

  • Java: compile and run hanging at command prompt

    - by dwwilson66
    I'm having an issue that I'm hoping someone can help with. I'm working on netbook running WinXP Pro SP3, 1.6GHz & 1GB of RAM. I've got a relatively simple java program that I'm able to successfully compile and run on other computers (both XP and Win7), so I suspect my code is working fine--I've verified that all computers are running the same version of Java (build 1.7.0_02-b13). For about the past week, I get maybe three or four compiles and runs at the command prompt (running CMD from within WinXp) before I hang with a blinking cursor after keying my command and pressing enter. If I shut down the command prompt window and restart it, I can compile and run the program just fine--again, pointing to an OS/environment issue rather than code. The only system change I've made in the past week is to uninstall a Lexmark printer that I ditched a year ago, and removing/reinstalling Java. Oh, and an automatic Windows update... :\ I've used this netbook successfully for programming classes for the past year and a half. Anyone familiar with this issue and know of some system tweaks to solve it? I suspect that memory may not be getting cleaned up when the java program quits...only when CMD closes, but don't know any tools to troubleshoot. Ideas?

    Read the article

  • Why doesn't the value in /proc/meminfo seem to map exactly to the system RAM?

    - by Eric Asberry
    The values in /proc/meminfo for MemTotal don't make sense. As a human, eyeballing it, it seems to roughly correspond to the installed RAM, but for using it to display the installed RAM from an automated utility it appears to be inexact, and inconsistent. For a system with 1G of RAM, I would expect the MemTotal line to have a value of 1048576 - 1024*1024. But instead, I'm seeing 1029392. On another 4G box, I'm seeing 3870172, which is not a multiple of 1024, and it's not even close to 1029392*4. On an 8G box, I get 8128204, which again seems to have no correlation to the other values, nor is it a multiple of 1024. I'm trying to use this information to report the RAM on a status web page. My work-around is to just "round" it to the nearest 1G multiple, but I'd like to understand why these values seem inconsistent and don't match my expectations. Can somebody fill me in on what I'm missing here? EDIT: To expand on the accepted answer below.... The reference can be found here. Also of interest to me from that page, which explains the inconsistency, is this bit: meminfo: Provides information about distribution and utilization of memory. This varies by architecture and compile options. ...

    Read the article

  • Hp Pavilion dv6000 wont boot right and freezes

    - by MalwareManiac
    I have an hp pavilion dv6000 that was having windows issues recently including randomly freezing. I eventually concluded that the hard drive was bad (And I was correct as the bad drive started making funny noises and quit working soon after). So I replaced it with a known good drive and put windows on it and it worked for a few hours. After a few restarts startup didn't even make it to the login screen. It just stays at a lighted black screen until I restarted. After another restart it made it to windows but then froze after a few minutes. A few more restarts yielded one of these two results. Like I mentioned earlier I have a know good drive in it and I also replaced the memory that was in it with a know good stick along with running memtest with no errors. So What does that leave? a corrupted windows installation? Motherboard? CPU? Any ideas?

    Read the article

  • iPhone: CoreGraphics and memory management

    - by carloe
    Can someone tell me what I am doing wrong here? I use this method to flip through pages in a PDF. But something in the code seems to not be released properly because every-time I pull a PDF page that contains an image my memory footprint increases. I am fairly new to CoreGraphics, and can't for the life of me figure out where this method would leak memory. -(UIImage *)pageAtIndex:(NSInteger)pageNumber withWidth:(CGFloat)width andHeight:(CGFloat)height { if((pageNumber>0) && (pageNumber<=pageCount)) { CGFloat scaleRatio; // multiplier by which the PDF Page will be scaled UIGraphicsBeginImageContext(CGSizeMake(width, height)); CGContextRef context = UIGraphicsGetCurrentContext(); CGPDFPageRef page = CGPDFDocumentGetPage(pdf, pageNumber); CGRect pageRect = CGPDFPageGetBoxRect(page, kCGPDFBleedBox); //Figure out the orientation of the PDF page and set the scaleRatio accordingly if(pageRect.size.width/pageRect.size.height < 1.0) { scaleRatio = height/pageRect.size.height; } else { scaleRatio = width/pageRect.size.width; } //Calculate the offset to center the image CGFloat xOffset = 0.0; CGFloat yOffset = height; if(pageRect.size.width*scaleRatio<width) { xOffset = (width/2)-(pageRect.size.width*scaleRatio/2); } else { yOffset = height-((height/2)-(pageRect.size.height*scaleRatio/2)); } CGContextTranslateCTM(context, xOffset, yOffset); CGContextScaleCTM(context, 1.0, -1.0); CGContextSaveGState(context); CGAffineTransform pdfTransform = CGPDFPageGetDrawingTransform(page, kCGPDFBleedBox, CGRectMake(0, 0, pageRect.size.width, pageRect.size.height), 0, true); pdfTransform = CGAffineTransformScale(pdfTransform, scaleRatio, scaleRatio); CGContextConcatCTM(context, pdfTransform); CGContextDrawPDFPage(context, page); UIImage *tempImage = [UIGraphicsGetImageFromCurrentImageContext() retain]; CGContextRestoreGState(context); UIGraphicsEndPDFContext(); UIGraphicsEndImageContext(); return tempImage; } return nil; }

    Read the article

  • C# CreatePipe() -> Protected memory error

    - by M. Dimitri
    Hi all, I trying to create a pipe using C#. The code is quite simple but I get a error saying "Attempted to read or write protected memory. This is often an indication that other memory is corrupt." Here the COMPLETE code of my form : public partial class Form1 : Form { [DllImport("kernel32.dll", CharSet = CharSet.Auto, SetLastError = true)] public static extern bool CreatePipe(out SafeFileHandle hReadPipe, out SafeFileHandle hWritePipe, SECURITY_ATTRIBUTES lpPipeAttributes, int nSize); [StructLayout(LayoutKind.Sequential)] public struct SECURITY_ATTRIBUTES { public DWORD nLength; public IntPtr lpSecurityDescriptor; public bool bInheritHandle; } public Form1() { InitializeComponent(); } private void btCreate_Click(object sender, EventArgs e) { SECURITY_ATTRIBUTES sa = new SECURITY_ATTRIBUTES(); sa.nLength = (DWORD)System.Runtime.InteropServices.Marshal.SizeOf(sa); sa.lpSecurityDescriptor = IntPtr.Zero; sa.bInheritHandle = true; SafeFileHandle hWrite = null; SafeFileHandle hRead = null; if (CreatePipe(out hRead, out hWrite, sa, 4096)) { MessageBox.Show("Pipe created !"); } else MessageBox.Show("Error : Pipe not created !"); } } At the top I declare : using DWORD = System.UInt32; Thank you very much if someone can help.

    Read the article

  • System Out Of Memory Exception in Production Server

    - by Sachin Gupta
    We have .net application installed on production server. It is using .net FrameWork 3.0 on windows server 2003 with RAM 4 GB. But there is a problem in application while running sometimes it throws system out of memory exception. I am very frustrating with this. Also I am unable to simulate the issue. I had checked all the possibilities which can cause the problem but didn’t get any thing which solve the issue I checked on production server event log found the Out Of Memory Exception also INVALID VIEW STATE logs are there. Look at the following event log which may help to find solutions. Exception information: Exception type: HttpException Exception message: Invalid viewstate. Request information: Request path: /zContest/ScriptResource.axd User: LisaA Is authenticated: True Authentication Type: Forms Thread information: Thread ID: 10 Is impersonating: True Stack trace: at System.Web.UI.Page.DecryptStringWithIV(String s, IVType ivType) at System.Web.UI.Page.DecryptString(String s) at System.Web.Handlers.ScriptResourceHandler.DecryptParameter(NameValueCollection queryString) at System.Web.Handlers.ScriptResourceHandler.ProcessRequestInternal(HttpResponse response, NameValueCollection queryString, VirtualFileReader fileReader) at System.Web.Handlers.ScriptResourceHandler.ProcessRequest(HttpContext context) at System.Web.Handlers.ScriptResourceHandler.System.Web.IHttpHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) ------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------------------------------------------------------ Event code: 3005 Event message: An unhandled exception has occurred. Process information: Process ID: 5388 Process name: w3wp.exe Exception information: Exception type: OutOfMemoryException Exception message: Exception of type 'System.OutOfMemoryException' was thrown. ------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------------------------------------------------------ Please help me out on this

    Read the article

  • Memory leak / GLib issue.

    - by Andrei Ciobanu
    1: /* 2: * File: xyn-playlist.c 3: * Author: Andrei Ciobanu 4: * 5: * Created on June 4, 2010, 12:47 PM 6: */ 7:   8: #include <dirent.h> 9: #include <glib.h> 10: #include <stdio.h> 11: #include <stdlib.h> 12: #include <sys/stat.h> 13: #include <unistd.h> 14:   15: /** 16: * Returns a list all the file(paths) from a directory. 17: * Returns 'NULL' if a certain error occurs. 18: * @param dir_path. 19: * @param A list of gchars* indicating what file patterns to detect. 20: */ 21: GSList *xyn_pl_get_files(const gchar *dir_path, GSList *file_patterns) { 22: /* Returning list containing file paths */ 23: GSList *fpaths = NULL; 24: /* Used to scan directories for subdirs. Acts like a 25: * stack, to avoid recursion. */ 26: GSList *dirs = NULL; 27: /* Current dir */ 28: DIR *cdir = NULL; 29: /* Current dir entries */ 30: struct dirent *cent = NULL; 31: /* File stats */ 32: struct stat cent_stat; 33: /* dir_path duplicate, on the heap */ 34: gchar *dir_pdup; 35:   36: if (dir_path == NULL) { 37: return NULL; 38: } 39:   40: dir_pdup = g_strdup((const gchar*) dir_path); 41: dirs = g_slist_append(dirs, (gpointer) dir_pdup); 42: while (dirs != NULL) { 43: cdir = opendir((const gchar*) dirs->data); 44: if (cdir == NULL) { 45: g_slist_free(dirs); 46: g_slist_free(fpaths); 47: return NULL; 48: } 49: chdir((const gchar*) dirs->data); 50: while ((cent = readdir(cdir)) != NULL) { 51: lstat(cent->d_name, &cent_stat); 52: if (S_ISDIR(cent_stat.st_mode)) { 53: if (g_strcmp0(cent->d_name, ".") == 0 || 54: g_strcmp0(cent->d_name, "..") == 0) { 55: /* Skip "." and ".." dirs */ 56: continue; 57: } 58: dirs = g_slist_append(dirs, 59: g_strconcat((gchar*) dirs->data, "/", cent->d_name, NULL)); 60: } else { 61: fpaths = g_slist_append(fpaths, 62: g_strconcat((gchar*) dirs->data, "/", cent->d_name, NULL)); 63: } 64: } 65: g_free(dirs->data); 66: dirs = g_slist_delete_link(dirs, dirs); 67: closedir(cdir); 68: } 69: return fpaths; 70: } 71:   72: int main(int argc, char** argv) { 73: GSList *l = NULL; 74: l = xyn_pl_get_files("/home/andrei/Music", NULL); 75: g_slist_foreach(l,(GFunc)printf,NULL); 76: printf("%d\n",g_slist_length(l)); 77: g_slist_free(l); 78: return (0); 79: } 80:   81:   82: -----------------------------------------------------------------------------------------------==15429== 83: ==15429== HEAP SUMMARY: 84: ==15429== in use at exit: 751,451 bytes in 7,263 blocks 85: ==15429== total heap usage: 8,611 allocs, 1,348 frees, 22,898,217 bytes allocated 86: ==15429== 87: ==15429== 120 bytes in 1 blocks are possibly lost in loss record 1 of 11 88: ==15429== at 0x4024106: memalign (vg_replace_malloc.c:581) 89: ==15429== by 0x4024163: posix_memalign (vg_replace_malloc.c:709) 90: ==15429== by 0x40969C1: ??? (in /lib/libglib-2.0.so.0.2400.1) 91: ==15429== by 0x40971F6: g_slice_alloc (in /lib/libglib-2.0.so.0.2400.1) 92: ==15429== by 0x40988A5: g_slist_append (in /lib/libglib-2.0.so.0.2400.1) 93: ==15429== by 0x80488F0: xyn_pl_get_files (xyn-playlist.c:41) 94: ==15429== by 0x8048848: main (main.c:18) 95: ==15429== 96: ==15429== 129 bytes in 1 blocks are possibly lost in loss record 2 of 11 97: ==15429== at 0x4024F20: malloc (vg_replace_malloc.c:236) 98: ==15429== by 0x4081243: g_malloc (in /lib/libglib-2.0.so.0.2400.1) 99: ==15429== by 0x409B85B: g_strconcat (in /lib/libglib-2.0.so.0.2400.1) 100: ==15429== by 0x80489FE: xyn_pl_get_files (xyn-playlist.c:62) 101: ==15429== by 0x8048848: main (main.c:18) 102: ==15429== 103: ==15429== 360 bytes in 3 blocks are possibly lost in loss record 3 of 11 104: ==15429== at 0x4024106: memalign (vg_replace_malloc.c:581) 105: ==15429== by 0x4024163: posix_memalign (vg_replace_malloc.c:709) 106: ==15429== by 0x40969C1: ??? (in /lib/libglib-2.0.so.0.2400.1) 107: ==15429== by 0x4097222: g_slice_alloc (in /lib/libglib-2.0.so.0.2400.1) 108: ==15429== by 0x40988A5: g_slist_append (in /lib/libglib-2.0.so.0.2400.1) 109: ==15429== by 0x80488F0: xyn_pl_get_files (xyn-playlist.c:41) 110: ==15429== by 0x8048848: main (main.c:18) 111: ==15429== 112: ==15429== 508 bytes in 1 blocks are still reachable in loss record 4 of 11 113: ==15429== at 0x402425F: calloc (vg_replace_malloc.c:467) 114: ==15429== by 0x408113B: g_malloc0 (in /lib/libglib-2.0.so.0.2400.1) 115: ==15429== by 0x409624D: ??? (in /lib/libglib-2.0.so.0.2400.1) 116: ==15429== by 0x409710C: g_slice_alloc (in /lib/libglib-2.0.so.0.2400.1) 117: ==15429== by 0x40988A5: g_slist_append (in /lib/libglib-2.0.so.0.2400.1) 118: ==15429== by 0x80488F0: xyn_pl_get_files (xyn-playlist.c:41) 119: ==15429== by 0x8048848: main (main.c:18) 120: ==15429== 121: ==15429== 508 bytes in 1 blocks are still reachable in loss record 5 of 11 122: ==15429== at 0x402425F: calloc (vg_replace_malloc.c:467) 123: ==15429== by 0x408113B: g_malloc0 (in /lib/libglib-2.0.so.0.2400.1) 124: ==15429== by 0x409626F: ??? (in /lib/libglib-2.0.so.0.2400.1) 125: ==15429== by 0x409710C: g_slice_alloc (in /lib/libglib-2.0.so.0.2400.1) 126: ==15429== by 0x40988A5: g_slist_append (in /lib/libglib-2.0.so.0.2400.1) 127: ==15429== by 0x80488F0: xyn_pl_get_files (xyn-playlist.c:41) 128: ==15429== by 0x8048848: main (main.c:18) 129: ==15429== 130: ==15429== 508 bytes in 1 blocks are still reachable in loss record 6 of 11 131: ==15429== at 0x402425F: calloc (vg_replace_malloc.c:467) 132: ==15429== by 0x408113B: g_malloc0 (in /lib/libglib-2.0.so.0.2400.1) 133: ==15429== by 0x4096291: ??? (in /lib/libglib-2.0.so.0.2400.1) 134: ==15429== by 0x409710C: g_slice_alloc (in /lib/libglib-2.0.so.0.2400.1) 135: ==15429== by 0x40988A5: g_slist_append (in /lib/libglib-2.0.so.0.2400.1) 136: ==15429== by 0x80488F0: xyn_pl_get_files (xyn-playlist.c:41) 137: ==15429== by 0x8048848: main (main.c:18) 138: ==15429== 139: ==15429== 1,200 bytes in 10 blocks are possibly lost in loss record 7 of 11 140: ==15429== at 0x4024106: memalign (vg_replace_malloc.c:581) 141: ==15429== by 0x4024163: posix_memalign (vg_replace_malloc.c:709) 142: ==15429== by 0x40969C1: ??? (in /lib/libglib-2.0.so.0.2400.1) 143: ==15429== by 0x40971F6: g_slice_alloc (in /lib/libglib-2.0.so.0.2400.1) 144: ==15429== by 0x40988A5: g_slist_append (in /lib/libglib-2.0.so.0.2400.1) 145: ==15429== by 0x8048A0D: xyn_pl_get_files (xyn-playlist.c:61) 146: ==15429== by 0x8048848: main (main.c:18) 147: ==15429== 148: ==15429== 2,040 bytes in 1 blocks are still reachable in loss record 8 of 11 149: ==15429== at 0x402425F: calloc (vg_replace_malloc.c:467) 150: ==15429== by 0x408113B: g_malloc0 (in /lib/libglib-2.0.so.0.2400.1) 151: ==15429== by 0x40970AB: g_slice_alloc (in /lib/libglib-2.0.so.0.2400.1) 152: ==15429== by 0x40988A5: g_slist_append (in /lib/libglib-2.0.so.0.2400.1) 153: ==15429== by 0x80488F0: xyn_pl_get_files (xyn-playlist.c:41) 154: ==15429== by 0x8048848: main (main.c:18) 155: ==15429== 156: ==15429== 4,320 bytes in 36 blocks are possibly lost in loss record 9 of 11 157: ==15429== at 0x4024106: memalign (vg_replace_malloc.c:581) 158: ==15429== by 0x4024163: posix_memalign (vg_replace_malloc.c:709) 159: ==15429== by 0x40969C1: ??? (in /lib/libglib-2.0.so.0.2400.1) 160: ==15429== by 0x4097222: g_slice_alloc (in /lib/libglib-2.0.so.0.2400.1) 161: ==15429== by 0x40988A5: g_slist_append (in /lib/libglib-2.0.so.0.2400.1) 162: ==15429== by 0x80489D2: xyn_pl_get_files (xyn-playlist.c:58) 163: ==15429== by 0x8048848: main (main.c:18) 164: ==15429== 165: ==15429== 56,640 bytes in 472 blocks are possibly lost in loss record 10 of 11 166: ==15429== at 0x4024106: memalign (vg_replace_malloc.c:581) 167: ==15429== by 0x4024163: posix_memalign (vg_replace_malloc.c:709) 168: ==15429== by 0x40969C1: ??? (in /lib/libglib-2.0.so.0.2400.1) 169: ==15429== by 0x4097222: g_slice_alloc (in /lib/libglib-2.0.so.0.2400.1) 170: ==15429== by 0x40988A5: g_slist_append (in /lib/libglib-2.0.so.0.2400.1) 171: ==15429== by 0x8048A0D: xyn_pl_get_files (xyn-playlist.c:61) 172: ==15429== by 0x8048848: main (main.c:18) 173: ==15429== 174: ==15429== 685,118 bytes in 6,736 blocks are definitely lost in loss record 11 of 11 175: ==15429== at 0x4024F20: malloc (vg_replace_malloc.c:236) 176: ==15429== by 0x4081243: g_malloc (in /lib/libglib-2.0.so.0.2400.1) 177: ==15429== by 0x409B85B: g_strconcat (in /lib/libglib-2.0.so.0.2400.1) 178: ==15429== by 0x80489FE: xyn_pl_get_files (xyn-playlist.c:62) 179: ==15429== by 0x8048848: main (main.c:18) 180: ==15429== 181: ==15429== LEAK SUMMARY: 182: ==15429== definitely lost: 685,118 bytes in 6,736 blocks 183: ==15429== indirectly lost: 0 bytes in 0 blocks 184: ==15429== possibly lost: 62,769 bytes in 523 blocks 185: ==15429== still reachable: 3,564 bytes in 4 blocks 186: ==15429== suppressed: 0 bytes in 0 blocks 187: ==15429== 188: ==15429== For counts of detected and suppressed errors, rerun with: -v 189: ==15429== ERROR SUMMARY: 7 errors from 7 contexts (suppressed: 17 from 8) 190: ---------------------------------------------------------------------------------------------- I am using the above code in order to create a list with all the filepaths in a certain directory. (In my case fts.h or ftw.h are not an option). I am using GLib as the data structures library. Still I have my doubts in regarding the way GLib is allocating, de-allocating memory ? When invoking g_slist_free(list) i also free the data contained by the elements ? Why all those memory leaks appear ? Is valgrind a suitable tool for profilinf memory issues when using a complex library like GLib ? LATER EDIT: If I g_slist_foreach(l,(GFunc)g_free,NULL);, the valgrind report is different, (All the memory leaks from 'definitely lost' will move to 'indirectly lost'). Still I don't see the point ? Aren't GLib collections implement a way to be freed ?

    Read the article

  • Winforms: Attempted to read or write protected memory. This is often an indication that other memory is corrupt

    - by mamcx
    I have a bunch of background events. All of them call a log: private void log(string text, params object[] values) { if (editLog.InvokeRequired) { editLog.BeginInvoke( (MethodInvoker)delegate { this.log(text, values); }); } else { text = string.Format(text, values) + Environment.NewLine; lock (editLog) { editLog.AppendText(text); editLog.SelectionStart = editLog.TextLength; editLog.ScrollToCaret(); } } } Sometimes I get this, but other times not: System.AccessViolationException was unhandled Message=Attempted to read or write protected memory. This is often an indication that other memory is corrupt. Source=System.Windows.Forms StackTrace: at System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr wndProc, IntPtr hWnd, Int32 msg, IntPtr wParam, IntPtr lParam) at System.Windows.Forms.NativeWindow.DefWndProc(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.RichTextBox.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.SendMessage(HandleRef hWnd, Int32 msg, Int32 wParam, Object& editOle) at System.Windows.Forms.TextBoxBase.ScrollToCaret() at Program1.frmMain.log(String text, Object[] values) in ... ... ... P.D: Not always stop at this line, randomly will be one of the three times editLog methods/properties are used. Not always a exception is throw. Sometimes look like the thing freeze. But not the main UI, just the flow of messages (ie: log look like is never called again) The app is a single form, with background process. I can't see what I doing wrong with this...

    Read the article

  • AccessViolationException from a combo: Attempted to read or write protected memory

    - by Sparky
    Users are occassionally getting the above error when using our application (VB.Net, Winforms, using v2 of the framework). I'm not able to reproduce it. The callstack is as follows: : System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at System.Windows.Forms.UnsafeNativeMethods.CallWindowProc(IntPtr wndProc, IntPtr hWnd, Int32 msg, IntPtr wParam, IntPtr lParam) at System.Windows.Forms.NativeWindow.DefWndProc(Message& m) at System.Windows.Forms.Control.DefWndProc(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ComboBox.WndProc(Message& m) at ControlEx.AutoCompleteCombo.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) The code for ControlEx.AutoCompleteCombo.WndProc is as follows: Protected Overrides Sub WndProc(ByRef m As System.Windows.Forms.Message) Try If Not m_fReadOnly Then MyBase.WndProc(m) Else Select Case m.Msg Case WM_LBUTTONDOWN, WM_LBUTTONDBLCLK ' do nothing Case Else MyBase.WndProc(m) End Select End If Catch ex As OutOfMemoryException Throw New OutOfMemoryException("Exception during WndProc for combo " & Me.Name, ex) End Try End Sub The error handling was added so we can determine which combo causes the problem when we get an OutOfMemoryException. Any clues as to what causes this would be muchly appreciated! :-)

    Read the article

  • FindByIdentity in System.DirectoryServices.AccountManagment Memory Issues

    - by MVC Fanatic
    I'm working on an active directory managament application. In addition to the typical Create A New User, Enable/Disable an account, reset my password etc. it also managages application permissions for all of the clients web applications. Application management is handled by thousands of AD groups such as which are built from 3 letter codes for the application, section and site, there are also hundreds of AD groups which determine which applications and locations a coordinator can grant rights to. All of these groups in turn belong to other groups so I typically filter the groups list with the MemberOf property to find the groups that a user directly belongs to (or everyone has rights to do everything). I've made extensive use of the System.DirectoryServices.AccountManagment namespace using the FindByIdentity method in 31 places throughout the application. This method calls a private method FindPrincipalByIdentRefHelper on the internal ADStoreCtx class. A SearchResultCollection is created but not disposed so eventually typically once or twice a day the web server runs out of memory and all of the applications on the web server stop responsing until iis is reset because the resources used by the com objects aren't ever relased. There are places where I fall back to the underlying directory objects, but there are lot of places where I'm using the properties on the Principal - it's a vast improvement over using the esoteric ad property names in the .Net 2.0 Directory services code. I've contacted microsoft about the problem and it's been fixed in .Net 4.0 but they don't currently have plans to fix it in 3.5 unless there is intrest in the community about it. I only found information about it in a couple of places the MDSN documentation in the community content state's there is a memory leak at the bottom (guess I should have read that before using the the method) http://msdn.microsoft.com/en-us/library/bb345628.aspx And the class in question is internal and doesn't expose SearchResultsCollection outside the offending method so I can't get at the results to dispose them or inherit from the class and override the method. So my questions are Has anyone else encountered this problem? If so were you able to work around it? Do I have any option besides rewriting the application not using any of the .Net 3.5 active directory code? Thanks

    Read the article

  • Visual Studio project using the Quality Center API remains in memory

    - by Traveling Tech Guy
    Hi, Currently developing a connector DLL to HP's Quality Center. I'm using their (insert expelative) COM API to connect to the server. An Interop wrapper gets created automatically by VStudio. My solution has 2 projects: the DLL and a tester application - essentially a form with buttons that call functions in the DLL. Everything works well - I can create defects, update them and delete them. When I close the main form, the application stops nicely. But when I call a function that returns a list of all available projects (to fill a combo box), if I close the main form, VStudio still shows the solution as running and I have to stop it. I've managed to pinpoint a single function in my code that when I call, the solution remains "hung" and if I don't, it closes well. It's a call to a property in the TDC object get_VisibleProjects that returns a List (not the .Net one, but a type in the COM library) - I just iterate over it and return a proper list (that I later use to fill the combo box): public List<string> GetAvailableProjects() { List<string> projects = new List<string>(); foreach (string project in this.tdc.get_VisibleProjects(qcDomain)) { projects.Add(project); } return projects; } My assumption is that something gets retained in memory. If I run the EXE outside of VStudio it closes - but who knows what gets left behind in memory? My question is - how do I get rid of whatever calling this property returns? Shouldn't the GC handle this? Do I need to delve into pointers? Things I've tried: getting the list into a variable and setting it to null at the end of the function Adding a destructor to the class and nulling the tdc object Stepping through the tester function application all the way out, whne the form closes and the Main function ends - it closes, but VStudio still shows I'm running. Thanks for your assistance!

    Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >