Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 156/314 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Windows file sharing connects over WiFi instead of LAN

  - by zacaj

  I have a laptop and a desktop computer, and I need to sync lots of files to the laptop and back whenever I go on a trip, etc. I've got a LAN cable connected into an extra port on the desktop that I plug into the laptop so I can get gigabit file transfers instead of wireless G. They connect fine. If I do an FTP transfer, for instance, using the LAN IP addresses, it goes at ~40MB/s, as it should. However when I copy files using explorer and native windows file sharing it detects the other computer by name, not IP (eg \\DESKTOP-PC\ instead of \\192.168.0.100\) and always connects to it by its wireless IP address instead of the faster LAN address. Both computers are running Windows 7. I have tried editing the priorities of the adapters in Advanced Settings and putting the LAN adapters above the wifi ones, but this didn't have any effect

  Read the article

• How can I correlate a wall jack to a user/machine on the domain?

  - by harryfino

  After reading Valve's new employee handbook, I was really interested in setting up a company map like they described on page 6: "The fact that everyone is always moving around within the company makes people hard to find. That’s why we have http://user — check it out. We know where you are based on where your machine is plugged in, so use this site to see a map of where everyone is right now." What I'm trying to figure out is: how I can tell which machine or domain user (either will do) is connected to a particular wall jack?

  Read the article

• How to stop ethernet interface in bridge configuration from obtaining IP address via DHCP

  - by user71061

  Hi! I'm trying to configure openvpn in bridging configuration. First step of doing this requires creating bridge interface (br0), bridging together physical ethernet interface (eth0) and logical tap0 interface. This can be done with simple script but I want to use less popular approach, configuring bridge interface entirely via /etc/network/interfaces file (on Debian linux). So I have removed all eth0 definitions form /etc/network/interfaces and replaced if with following br0 definition: auto br0 iface br0 inet static pre-up openvpn --mktun --dev tap0 address 10.0.0.1 netmask 255.255.255.0 bridge_ports eth0 tap0 post-down openvpn --rmtun --dev tap0 This works as I expected, but there is only one problem: interface eth0 is part of bridge interface br0 AND it also receive it's own IP address from my DHCP server (located on same LAN where eth0 is connected). My questions is: how to stop eth0 interface from obtaining it's own IP address? (It should only be part of br0 bridge).

  Read the article

• assign auto static ip on ubuntu 10.04

  - by ronakin

  I'm trying to set auto static ip. I've set the content of /etc/network/interfaces to be: auto lo auto eth0 iface eth0 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1. and /etc/resolv.conf to be: nameserver 192.168.1.1. It seems that the ip address have set successfully. However, when I plug out the lan cable and then plug it back, the ip address is not set. How can I make it automatically set the static ip when the lan cable is connected?

  Read the article

• Routing table change to access Internet over mifi

  - by Randall Blake

  I have two networks at home. One uses a Verizon mifi wireless on 192.168.1.1. The other uses a dlink router on 192.168.0.1. I have one laptop with two nics, one wireless and one not. The wireless nic connects to the mifi. The Ethernet nic connects to the dlink router. It's ip is 192.168.0.2. I also have a laptop with only one nic connected to the dlink on 192.168.0.3. I want to connect laptop 2 to the Internet. Can I do that by adding an entry to the routing table so that destination 0.0.0.0 routes to 192.168.0.2? If I do that, will laptop 1 "know" that it should route traffic from 192.168.0.3 to 192.168.1.1? Thanks for any assistance.

  Read the article

• Dell 2950 Perc 6/i "physical disk" and "Enclosure(Backplane)" under Connector 1 in OMSA tree- Troubleshoot help

  - by user66357

  Just looking for someone who might know why this could occur... In OMSA, on my Dell 2950, there usually is only one "Physical Disks" child under "Enclosure (Backplane)" in the tree view. Currently, the tree looks like this: Dell PERC 6/i Integrated Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 removed) Physical Disks (1:33 Ready but unused) Normally it's like this: Connector 1 (RAID) Enclosure (Backplane) Physical Disks (1:04 good, 1:05 good) From the front, 6 of 6 3.5" SAS drives are connected. The server is showing Slot 5 as bad and the disk as removed. It seems that the drive in Slot 5 is being sensed as external to the Enclosure. Any ideas why this would happen? Think I can get away with rebuilding the virtual disk by replacing 1:05 with 1:33? Thanks.

  Read the article

• Installing SSL certs with nginx on Amazon EC2

  - by Ethan

  I finally got a cert from an authority and am struggling to get things working. I've created the appropriate combined certificate (personal + intermediate + root) and nginx is pointing to it. I got an elastic IP and connected it to my EC2 instance. My DNS records point to that IP. But when I point the browser to the hostname, I get the standard "Connection Untrusted" bit, with ssl_error_bad_cert_domain. Port 443 is open - I can get to the site over https if I ignore the warning. Weird thing is, under technical details, it lists the domain I tried to access as valid! When I try and diagnose with ssl testing sites, they don't even detect a certificate! What am I missing here? domain is yanlj.coinculture.info. Note I've got coinculture.info running on a home server without a dedicated IP and have the same problem, but I'll be moving that to the same EC2 instance as soon as I figure this thing out. I thought the elastic IP would solve things but it hasn't

  Read the article

• something is downloading in background Linux

  - by wisdom

  My laptop boots normally to Linux -LinuxMint- and immediately I like to open gnome-system-monitor but the shock is that something is downloading(the problem has been out 2 days ago) and nothing I run yet ! I did iftop in terminal but nothing strange -a screen shot provided-, also I tried nethogs which showed nothing at all. The more complicated when I reboot and same problem is there so I can't browse/surf Internet, no one connected to my network can browse any more it's absorbing the stream horribly! After many reboots it will go to normal state(no background downloading). But really I can't figure out the problem going behind the scene ! Any suggestion,any help would be appreciated...thanks

  Read the article

• Linux - How to manage the password of root?

  - by Jonathan Rioux

  We have just deployed a couple of Linux server. Each sysadmin will have his own account on the server (i.e.: jsmith), and will connect using SSH with a certificate which will be put into the "authorized_keys" file in their home directory. Once connected on the server, if they want to issue an elevated command, they will do like: sudo ifconfig They will then enter the root password. What I would like to know now are the best practices in managing that root password. Should I change it periodicaly? And how do I share that new password with the sysadmins? **Of course I will disable the root logon in SSH.

  Read the article

• How can I have 2 users working on the same PC at the same time

  - by Sharon Cook

  I have a pc/machine that has its own ip address and it can be connected to by certain external PC's through our firewall. User A has a RDP connection from say Germany directly to the PC - his ip number is allowed through our firewall to connect to the PC. He now wants User B to connect at the same time so that User B can see what User A is doing on the screen at the same time and maybe take over the screen to put his input in. I know that you cannot have 2 RDP connections at the same time but what would be the easiest solution to this. I want User A to keep his RDP connection, but I am unsure of what to suggest so that User B can see what is going on at the same time. The Users are not happy to use Real VNC, etc.

  Read the article

• routing traffic between two network cards through firewall

  - by RubyFreak

  I'm trying to test a network device (firewall) using a Linux box, with two network cards, one interface connected to the WAN zone and another interface to LAN zone. The configuration is similar with that |ETH0| <-> | FW | <-> ETH1 So from both interfaces I'm able to ping the respective firewall interface. But i'm not able to fire something like: ping -I eth0 ip.from.eth1 and to get any answer. Is that possible or should the linux network namespace solution or user level tcp stacks (VMs are out of question)

  Read the article

• SSH access from outside to a pc inside network

  - by Raja

  I have a static IP and ADSL router linked to a linksys wireless router to which all my machines are connected. I would want to setup SVN on one of machines and provide SSH access which should be accessible by users outside my network. Would this be possible? Even just SVN access through web should be fine. Please let me know what all things should be done to achieve this ? I have Ubuntu VM running in a iMac Leopard machine and another 2 Win 7 32/64 bit machines. I can setup standalone Ubuntu or Win XP on another machine. Thanks, Raja.

  Read the article

• Accessing Windows 7 Printer from Ubuntu Linux via LPR/LPD or Samba

  - by nitbuntu

  Hi, I'm having difficulty printing from my Linux (Ubuntu 10.04) based PC to a printer connected to a Windows 7 machine. I was trying to connect using Samba (version 3.5.6) but this always brings up an authentication screen which never accepts any password I use. So I read somewhere that an alternative is to access the Windows printer via LPR/LPD. I added an LPR/LPD printer in Windows 7, but even within Windows 7, I am not able to print as the print que monitor shows as 'printer busy'. The printer in question is an Epson Stylus DX7400 and works fine when using the standard USB ports....but doesn't when I use with the LPR/LPD ports. I even opened up the TCP/IP port 515 in my McAfee firewall without any success. Any help with this would be highly appreciated. Additionally, does anyone have any idea how I can get Samba working for me?

  Read the article

• Revo 3610 not doing hdmi handshake

  - by DoomStone

  I am having a problem with my Revo 3610 witch is connected to my tv via hdmi. For some reason will it not do the hdmi handshake with the tv, so my tv does not think that there are anything in the hdmi port. I have tested the tv and it works find, with my laptop and dvd. It dose work some times, but this time have it failed for 2 days in a row, and i have tried rebooting, turning the tv off and on, and so on nothing helps. I can trick the TV to listen to the HDMI with connecting with my laptop and then change the hdmi back to my revo, this on the other hand results in the image going thoug nicely but there are a big fat "Check signal cable." on the screen. I have also tryed changing the resolution in the revo but this dose not help ether. Have any one had this problem before, and if so how did you fix it? Example: http://i.imgur.com/gguZ4.jpg

  Read the article

• What are the benefits of running a app server in user space, like Unicorn, as opposed to as sudo?

  - by dan

  I've been using Phusion Passenger + Rails/Sinatra for a lot of projects. Passenger runs under the main Nginx or Apache process. But I'm interested in Unicorn, partly because it runs in user space. You just set up Nginx to proxy_pass requests to a unix socket that is connected to Unicorn processes that you fire up under a normal user account. Is there anything to be said as far as advantages and disadvantages of these two alternative approaches to running an web app? I mean in terms of ease of administration, stability, simplicity, etc.

  Read the article

• FTP - 530 Sorry, the maximum number of clients...?

  - by aSeptik

  Hi All! i know this is not a properly code question, but who of you don't use an FTP client!? ;-) Ok my problem is that my FTP work great, exept when i upload files on a particular client server! on this server happen that some files are uploaded fine and others not, they stop while uploading at half of it's size, then this error is displayed: 530 Sorry, the maximum number of clients (4) from your host are already connected. Unable to make a connection. Please try again. Obviously this is not true, i'm the only one that is uploading! Anyone had the same experience with this!? PS: i have tried many different FTP, all display the same error or just hung up! Thank's

  Read the article

• Cannot connect to internet by Internet Explorer

  - by user428368

  I was using Mozilla Firefox for browsing and it workes Ok. But now when I want to open any web site by using IE8 it says Internet Explorer cannot display the webpage (and Mozilla still works). I came to this problem because I wanted to install Google Earth, but it says that the program cannot access the server .... so Google sugested me to open one of three links in IE .... and it doesn't work. By the way I'm connected to Internet via LAN, but in IE, Internet Options, Connections there is nothing, not a single conection. People, please help....

  Read the article

• Moving the OS X swap file to a faster drive

  - by Milky Joe

  I have a new Mac Mini that's running the latest version of Snow Leopard. The internal drive is a bit of a slouch. I'd like to move the swap file (or whatever it's called is OS X) to my faster external drive (Firewire 800, permanently connected). Is this possible? I've read that the old solutions aren't working in 10.6. My Mac has 2GB of RAM, so the swap file is used quite a bit when I'm doing intensive work (Photoshop etc).

  Read the article

• Monitor sleep in Windows XP does not work. Is there an add on to force it?

  - by bert

  I have an EEE box with XP Home and a DVI connected TFT, and it does not sleep the monitor. It only starts working after I go to the energy control panel and turn it off and on again. Then the timed sleep works for the current session of computer use. After a shut down and boot next day, sleep does not work again (it is still set in the preferences however). What can hold the sleep function from working? Are there issues with Skype or MSN? Is there a utility to be less critic to processes interrupting sleep and offer a more reliable monitor sleep function for XP?

  Read the article

• Firewalling a Cisco ASA Split tunnel

  - by dunxd

  I have a Cisco ASA 5510 at head office, and Cisco ASA 5505 in remote offices. The remote offices are connected over a split tunnelled VPN - the ASA 5505s use "Easy VPN" Client type VPN in Network Extension Mode (NEM). I'd like to set firewall rules for the non-tunnelled traffic only. Traffic over the VPN to head office should not have any firewall rules applied. I might want to apply different firewall rules to different remote offices. All the documentation I have been able to find assumes the Client VPN is a software endpoint, and all the configuration is done at the 5510. When using a Cisco 5505 as the VPN client, is it possible to configure any firewalling at the Client end, or does it all have to come from the 5510? Are there any other issues to look out for when split-tunnelling a VPN by this method?

  Read the article

• Can't change permission/ownership/group of external hard drive on Ubuntu.

  - by MikeN

  I have an external hard drive connected to my Linux box. I wanted to setup a web server to access files on it, but the permission on all files and directories on the drive are "rwx" for the owner which is my local login, and the group is the "root" group. I need the files readable by the apache user, I was trying to set all files to be "chmod a+rwx -R *", but this doesn't do anything (gives no errros, just has no effect.) I tried chaning the group using "chgrp" to my user group, but that won't work either, it gives me errors that I lack permission even when I run all those commands as sudo! What's up with this hard drive??? "sudo chmod a+rwx *" should work on anything, right?

  Read the article

• Home Server restore fails cannot find boot device

  - by Tim Heuer

  I am using Windows Home Server to backup my PCs. I recently had a hard drive failure on one of my WHS connected PCs and obtained an identical sized/speed drive for my laptop. I used the latest home server restore CD and did the restore. It said it completed successfully. Upon reboot, it says 'cannot find boot device' and lists all my drives (hard drive, cd, network book) indicating no valid operating system was found. I boot using the Win7 repair disk and while it doesn't see the operating system, it sees the drive and if I go into a command prompt, I can see all my data on the drive. My laptop is Windows 7 64-bit Ultimate. I've tried most everything I can think of. I'm a technical user (software developer) so I'm pretty aware of how things work (or should). I don't feel like I'm missing a simple step here.

  Read the article

• Computer freezes for 2+ seconds, mouse still moves

  - by xsaero00

  I have this problem on my workstation. The computer would effectively freeze for 2-5 seconds for no apparent reason, then continue as normal. While frozen the mouse would still be movable, but only on one of screens in my multi-screen setup. What can be the likely cause. System: CPU: i7-920 Memory: 12G of Patriot DDR3, 6 modules OS: SLED 11, Suse Linux Enterprise Desktop, using Gnome Main board: Asus P6T Video: two Nvidia 9500GT connected to three displays I am using memory at recommended settings of 8-8-8-1333. It has an XMP profile. Th CPU is a bit overclocked to 3.3 GHz, but my cooling more than allows for it. I ran the computer with all overclocks off and lower memory speed but the issue was still there. Any ideas? Where should I start looking?

  Read the article

• Printer Brother DCP-110C Linux 64-bit drivers

  - by Ondra Žižka

  Hi, I need 64-bit Linux driver for DCP-110C (for Ubuntu 10.04 64-bit) I found only 32-bit here. http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/index.html I've tried to follow those instructions. During the installation, I got this: ondra@ondra-doma:~/Downloads$ sudo dpkg -i --force-all dcp110clpr-1.0.2-1.i386.deb dpkg: warning: overriding problem because --force enabled: package architecture (i386) does not match system (amd64) (Reading database ... 257283 files and directories currently installed.) Preparing to replace dcp110clpr 1.0.2-1 (using dcp110clpr-1.0.2-1.i386.deb) ... Unpacking replacement dcp110clpr ... Setting up dcp110clpr (1.0.2-1) ... ln: creating symbolic link `/usr/lib/libbrcompij2.so.1.0': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so.1': File exists ln: creating symbolic link `/usr/lib/libbrcompij2.so': File exists After installation, the printer is listed at the cups server, but does not work (no command has any effect on printer (which is, of course, on and connected)). Anyone has found some working solution? Thanks, Ondra

  Read the article

• Why do I have no TTY on a basic Ubuntu 9.10 server install?

  - by pr1001

  I have reinstalled Ubuntu 9.10 Server several times on a bog standard 1RU server and each time I finish the install and reboot I see GRUB run and am then presented with a black screen. The machine is running just fine, as I am able to SSH in, but I can't see anything on the attached monitor. I have a simple LCD screen connected via VGA and a signal is apparently being output to it, as it doesn't go asleep. Looking at /var/log/syslog I see: Mar 24 14:57:44 bridge5 rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] However, I later see: Mar 24 14:57:44 bridge5 kernel: [ 0.001368] console [tty0] enabled Any thoughts? Thanks!

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >