Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 161/314 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

• Solution to wirelessly project tablet desktop?

  - by Robert

  I’m trying to find a device that would allow a windows 7 client to wirelessly connect and display their screen to a projector while still connected to the wireless network. The idea is to allow a professor to still project and display content while walking around the room with their tablet. To date, haven’t been able to find a solution that meets the requirements, has anyone stumbled across one yet? Requirements Must support Windows 7 Must be able to connect to WPA2 Personal(and hopefully enterprise) Must not use any usb dongles – those get lost/damaged given a chance. Goal Wirelessly display screen to projector without cables from tablet/laptop.

  Read the article

• Troubleshooting mailserver (Postfix, Dovecot) on Ubuntu Server 9.10?

  - by Christoffer

  I have configured a mail server with Postfix and Dovecot on Ubuntu Server 9.10. I followed the guidelines here (using Maildir): https://help.ubuntu.com/community/Postfix https://help.ubuntu.com/community/Dovecot The tests seemed alright so I connected it to GMail which is able to connect and fetch e-mails. But since there's no e-mail in the Maildir/ directory I can't decide if the problem is Postfix or Dovecot. And I am totally new to mailservers so I don't know where to start troubleshooting. So, I want to start by testing Dovecot. How can I create a fake "Hello World"-email directly on the server (using a text editor) so that I can try to fetch it with GMail? If Dovecot is alright, where do I start looking for errors in Postfix? Thank you for your time. Christoffer

  Read the article

• Synergy 1.3.6 on Windows 7 Test not working

  - by Joel Avery

  So I have the client running, says perfectly connected to server when I run a test I run the same test on the server and it just says "running test. press stop to end test" and no output log file comes up like on the client. Then I stop the test it says synergy is about to quot with errors and warnings. Please check the log then click OK. Except for the log didnt come up and I don't know how to access the log from command prompt. And I'm pretty sure my thing is set up correct: section: links Joel-HP: left = JoelPC2 JoelPC2: right = Joel-HP end My Windows 7 64 bit server is on the right, Windows 7 32 bit client on left Both client and server are run as admin.

  Read the article

• Multiple VLANs on a single subnet

  - by mstaessen

  I would like to establish the setup shown below. The image is taken from (http://gcharriere.com/blog/?p=620) and explains how to set this up on a brocade device. I would like to use an ubuntu server to do the routing. Right now, the switch and the server/router are connected with a trunk and the server uses the vlan package, kernel module and (inner) subnets for routing. I would like that: no IP addresses get lost in the subnetting (outer subnet is /26, inner subnets are /28) I don't want the rigorous subdivision of my outer subnet. I want to assign a VLAN to any IP in the outer subnet. How do I need to configure my interfaces? What is the "ubuntu" translation of "ip follow ve"? Thanks!

  Read the article

• DLINK Dir-655 Sharing and connecting wirelessly

  - by CYREX

  I have a D-LINK DIR-655 and i wish to do the following: My PC is connected to the internet via eth0 (Wired) and it has a wireless card. I wish to connect to the DIR-655 Router and share my connection via the router but wirelessly. I do not want to connect via a cabled wired to the router. I want to connect to the router via wifi. After that i want to make the Router share the wireless connection am giving it to other PCs wirelessly. So the sharing and connecting in all PCs will be done via WiFi.

  Read the article

• Is it possible to add hardware on a remote machine and use it as if it was installed on the local machine?

  - by that0th3rGuy

  Probably a silly question. We have two computers in the apartment running Windows 7 and Windows Vista. 99% of the time we use headphones but every now and then we have a desire for some ambiance so we got a set of 2.1 speakers. But now only one of us has access to the speakers unless we move them around every now and then. So I was wondering if it's possible to add the other computer's sound card as a hardware device on my computer so that I can configure, for instance, Winamp to play through the other computer's sound card, hence the speakers connected to the other computer.

  Read the article

• is it possible for a router to provide different gateway?

  - by Hao

  i have tp-link wireless router 192.168.10.188, i was can make it function as DHCP provider(range 192.168.10.100 to 192.168.10.109). the only thing that i cannot make it work as intended, is for it to provide different gateway (192.168.10.1), the computers that obtain IP from that router properly get everything(dynamic IP and dns IP), but there is no function on that router to provide different gateway, the computers always get the router's address(192.168.10.188) as gateway. is there a router that can provide different gateway other than its own address? or the question should be, is the dhcp of a router can provide different gateway other than its own address? note: i cannot make the wireless router address as 192.168.10.1, we have main router(non-wireless, address is 192.168.10.1) that is connected directly to internet

  Read the article

• Why does text look so Horrible on my HD monitor?

  - by Laura

  I just bought a 1080p 22" Samsung Syncmaster 2333HD (connected via HDMI) and the picture and video quality is great but the text quality is absolutely horrible. This monitor has a built in HD TV tuner. Even as I type now all the text in this text box as well as in the browser toolbar and start menu, etc looks weird - like it all has a white outline around it that makes it jagged and hard to read. It hurts my eyes just to look at it. I am running my PC in the suggested native resolution of 1920x1080, so what's the problem? Is this one of the unavoidable downsides of using a HD monitor? Is there a solution to the problem?

  Read the article

• Is there a way to identify the device data is being received from? (python)

  - by Ed Prince

  Summary I have an MT4000 device connected to my computer using the serial port ttyS0. This is broadcasting data which is being received and read by a udp listener written in Python. I am also sending data manually through the terminal using a bash script I wrote. The Goal Is it possible to identify the device being used? The aim is for a web-page to allow the user to select which device they wish to see the data being sent. I would rather achieve this by directly identifying the device rather than saying anything from ttyS0, in case a different device is plugged in on that port. The Answer Is this possible, and if so, how? Everything I have found so far, is on identifying through a specific port.

  Read the article

• trouble with internet connection - slow to open web pages if they open at all until I put VPN on and then they open ok

  - by Caroline Coleman

  I am having problems with my internet connection. At the moment I am on a mac and connected through a netgear wireless router. The internet connection either won't open a webpage at all or if it does it takes ages. However if I turn my VPN on the pages open at a normal speed. Also skype functions OK and I seem to be able to download files ok. I have tried connecting with a wire between the router and the computer and it makes no difference.

  Read the article

• DHCPOFFER delay VLAN

  - by john883

  I have configured two VLANs [ 15 and 16 ] and a trunkport on a Cisco Catalyst 2960. The trunkport is connected to eth2 on a Linux server The server is configured to support VLAN's and the interfaces eth2.15 eth2.16 is configured with ip addresses on two different subnet. dhcp3-server is running on the same server and hands out IP-addresses to the VLANs. When connecting a client to a port that is configured in ex. VLAN 15 and requesting a IP-address, i experience a long delay before recieving a DHCPOFFER, around 30 seconds or so, the client needs to send a DHCPDISCOVER about five times but will always recieve a DHCPOFFER. Any suggestion why this delay is happening?

  Read the article

• I get regular power surges and my UPS ticks a lot due to a welding plant. Is this good or bad?

  - by EApubs

  In our home, there is a mechanic who often use a welding plant. When he use it, I think we get a power surge. My UPS ticks madly (not beep, it ticks). Sometimes, I even lose power to the keyboard. When typing, some keys get missing. 1) My question is, is it good for the computer? The UPS claimed to have surge protection. But isn't it working? What should I do to protect my PC? 2) The second question is, I also have a broadband router which is not connected to the UPS. Will it be effected?

  Read the article

• This is probably a horrible idea; putting a Mac Mini in a mini-fridge [closed]

  - by Christian A. Strømmen

  Possible Duplicate: Putting servers inside a refrigerator? Just moved to a new house and had to place my Mac Mini server in the attic. Now this is really nice and cool at this time of the year, but during summer it's going to get blistering hot up there, meaning I have to find a solution that won't kill my Mac Mini and the two WD external drives I have connected to it. Is there any good reason why I couldn't just buy a mini-fridge and put them inside that? The only thing I can think of is condensation building up, but I have no idea if that will be an issue or not. Something like this. And yes, I'm pretty sure this is a terrible idea, but I figured it was worth mentioning here and getting some feedback. What other options are there?

  Read the article

• Is it possible to combine two internet connections to increase performance?

  - by cornjuliox

  I've got a small home network, 3 PCs plus a laptop or two when the relatives come to visit, connected to a single cable internet connection. Now, as soon as everyone starts using the 'net the performance starts to suffer and if the load is heavy enough nobody can get anything done and everyone complains. At one point it was so bad that only one of us could use it at a time. I was researching possible solutions to this problem and I heard that internet cafes that utilize 2 internet connections, possibly from different providers, and have some sort of router that allows them to split the traffic between the both of them, with online games going through one and web traffic going through another. Is this possible? What is the technical term for it, and can/should it be applied to a home network setup or is there another solution to this problem?

  Read the article

• What's required to enable communication between two IP ranges located behind one switch?

  - by Eric3

  Within our co-located networking closet, we have control over two ranges of 254 addresses, e.g. 64.123.45.0/24 and 65.234.56.0/24. The problem is, if a host has only one IP address, or a block of addresses in only one range, it can't contact any of the addresses in the other subnet. All of our hosts use our hosting provider's respective gateway, e.g. 64.123.45.1 or 65.234.56.1 A host on the 64.123.45.0/24 range can contact the 65.234.56.1 gateway and vice-versa Everything in our closet is connected to an HP ProCurve 2810 (a Layer 2-only switch), which connects through a Juniper NetScreen-25 firewall to the outside world What can I do to enable communication between the two ranges? Is there some settings I can change, or do I need better networking equipment?

  Read the article

• Ubuntu 10.10: getting appropiate monitor resolution for lcd hdtv

  - by lurscher

  I'm running Ubuntu 10.10 x86_64 version, with Nvidia 9800 GT, installed 270.41.06 Nvidia drivers following this guide. I have a LG42LH30FR LCD TV connected with the dvi link - RGB PC input I'm able to get 1024x768 resolution without overscan (I can get 1080i = 1366x768 but there is a lot of hidden screen space to the right and I don't know what to do about it). I want to get full HD I can get full HD (1080p = 1920x1080) on Windows XP 64-bit with custom resolution created with Nvidia Control Panel, from reading over xorg.conf configurations it seems I need to add a certain modeling to the monitor configuration, but I don't know where to get the appropriate options for this task any suggestions?

  Read the article

• Adding FTP Users via Simple Control Panel

  - by Aristotle

  I just got setup with CentOS yesterday through GoDaddy, and today I'm trying to get into the server and start setting up some of my projects. I'm able to get in through PuTTY just fine, but I'm not able to connect through FTP with the same (root) account. I'm using Simple Control Panel, and have ensured that "Enable Server" is checked beneathSystem Configuration > FTP. Further, I've checked, and double checked that my root password is correct when providing the FTP details. Is there some other common setting I'm missing here that will prevent me from getting connected to the server to begin transfering files?

  Read the article

• Detecting damage done by virus

  - by user38471

  This morning after I went to college, a virus infected my PC without any user interaction at my end. When I came home my computer was completely frozen and infected with lots of trojans. I have not typed anything important since returning so keys cannot be logged. However I want to know exactly when my computer crashed from the time of infection to see what could potentially be done remotely by a hacker. The virus my pc was diagnosed with was "fakespypro" on a fully updated Windows 7 installation with firewall enabled. My computer was connected to an internal dorm room network, so probably that has had to do something with it. Any further information about how I could backtrace this virus infection or ways to discover what data might be stolen would be greatly appreciated.

  Read the article

• Can't ping IPs for devices not part of Windows Domain

  - by GiddyUpHorsey

  I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

  Read the article

• VMware two vSwitches Guests can't communicate between them

  - by Aaron R.

  I have some servers in this configuration: And I am not able, from VMGuest1, to ping either VMGuest3 or VMGuest4. I can, however, ping Host1 and Host2, which are attached to pSwitch1. The behavior is the same with VMGuest3 or 4 trying to ping VMGuest 1 or 2. I don't have promiscuity enabled for any of these switches, nor do I have a bridge set up inside ESXi for the virtual switches. I know that one of these options is usually necessary when trying to get connectivity between two virtual switches. These switches are connected, however, through their respective physical switches which are bridged together. Ping just times out, arp request looks like this: [root@vmguest1:~]# arp -a vmguest3 vmguest3.example.com (1.2.3.4) at <incomplete> on eth0 [root@vmguest1:~]# arp -a host1 host1.example.com (1.2.3.5) at 00:0C:64:97:1C:FF [ether] on eth0 VMGuest1 can reach hosts on pSwitch1, so why can't it get to hosts on vSwitch1 through pSwitch1 the same way?

  Read the article

• Find computer names on a private network (with nmap?)

  - by paracaudex

  On a LAN, I want to find out the names of all the connected computers using a cross-platform program, preferably nmap. I know I can do nmap -sn xxx.xxx.xxx.xxx/24 (where xxx.xxx.xxx.xxx is a local IP address) to find hosts which are up, but how do I find the computers' hostnames? Do they broadcast this in a way that I can find using nmap? UPDATE: It looks like Angry IP Scanner can do this. How does it do this? Can I replicate it with nmap?

  Read the article

• Can't ping self

  - by Paddy

  I have a wireless internet connection setup on my Mac. (v10.5.6) Am connected to the internet and everything is running smoothly. I recently discovered a quirky behaviour while setting up apache web server. When i typed in my dynamic ip (http://117.254.149.11/) in the webbrowser to visit my site pages it just timed out. In terminal i tried pinging localhost and it worked. $ ping localhost PING localhost (127.0.0.1): 56 data bytes 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.063 ms 64 bytes from 127.0.0.1: icmp_seq=1 ttl=64 time=0.056 ms 64 bytes from 127.0.0.1: icmp_seq=2 ttl=64 time=0.044 ms But if i pinged my ip it would just time out. $ ping 117.254.149.11 PING 117.254.149.11 (117.254.149.11): 56 data bytes ^C --- 117.254.149.11 ping statistics --- 10 packets transmitted, 0 packets received, 100% packet loss Pinging any other site works though. I am completely stumped. Any help would be greatly appreciated.

  Read the article

• dhclient append settings from multiple DHCP servers

  - by Brian

  I have a server with two interfaces connected to two separate networks, using DHCP for both. When dhclient is writing /etc/resolv.conf, I would like it to append settings that aren't already there. For instance, if I receive from one DHCP server: nameserver 10.0.0.1 search one.mydomain.com and from another: nameserver 10.1.1.254 search two.mydomain.com Then resolv.conf should look like this: search one.mydomain.com two.mydomain.com nameserver 10.0.0.1 nameserver 10.1.1.254 At the moment, it seems the last dhclient overwrites whatever was there. I know I can preconfigure settings in dhclient.conf using supercede or append, but then I have to hard-code the values. I've scoured the man page for dhclient, but it seems like dhclient prefers to work alone (i.e. not in conjunction with any other dhclients)...or am I missing something?

  Read the article

• Why does a redirect from a local IP address assume localhost?

  - by Jeremy

  I am developing a web application on my desktop and it is running on port 80. I am able to access the application from my laptop connected to the LAN by entering my desktop's LAN IP address 192.168.1.8. Now, my application sends a redirect after login, but my laptop assumes the final address is localhost/login. If I manually type in the IP address and URI for any page, it shows that I am logged in, so it works as expected. So, why does the redirect assume localhost? Both of my machines are linux-based. The laptop being Chrome OS. I am running nginx which proxies non-static file requests to jetty on port 8080.

  Read the article

• Windows Server vs Sharing

  - by Mark Lawrence

  Not sure if this is the right place for this question. I have a friend that owns a small business running 3 local machines, that are connected to the internet, and a server that each local machine connects to. He has recently bought a newer server, and by server I mean a Windows Vista box. He wants to use this purely to store data that the 3 local machines can access, kind of like a glorified external hard drive. Im suggesting to fore-go the server option and simply setup sharing on the 'server' box. Interested in hearing any suggestions as to whether the server idea is preferable?

  Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >