Search Results

Search found 5830 results on 234 pages for 'dr casper black'.

Page 156/234 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Accessing second hard drive

  - by Jonathan

  So I recently installed Ubuntu 10.10 64-bit on my computer. I installed it on my 60gb SSD hard drive, and in the installation it never acknowledged the existence of my second hard drive. The hard drive that I keep all my files on, and which I want to make my home folder if I can, is a Western Digital Caviar Black 1TB SATA 6Gb/s 64MB cache (WD1002FAEX). I've read the following: https://help.ubuntu.com/community/Mount but honestly cannot work out how to access the hard drive from my Ubuntu installation. I did have Windows 7 64-bit prior to installing Ubuntu. I have backed up all the files on the hard drive, but if I could just access them straight off that would be super cool. Does anyone know how I can use the second hard drive? Thank you for your help EDIT: The following directories are currently in my /dev/ folder: ati/, block/, bsg/, bus/, char/, cpu/, isk/, input/, mapper/, net/, pktcdvd/, pts/, shm/, snd/, and usb/ EDIT: Result from sudo fdisk -l Disk /dev/sda: 60.0 GB, 60022480896 bytes 255 heads, 63 sectors/track, 7297 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d2dfd Device Boot Start End Blocks Id System /dev/sda1 * 1 6994 56174592 83 Linux /dev/sda2 6994 7298 2438145 5 Extended /dev/sda5 6994 7298 2438144 82 Linux swap / Solaris @djeykib So very close to fixing it.. unfortunately on the last command you gave it says this: $ sudo apt-get install linux-lts-backport-natty Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-lts-backport-natty Checking on http://www.ubuntuupdates.org/ppas reveals that it is only available for 10.04. Looks like I'll have to unplug and re-plug hardware if I want it working still :(

  Read the article

• Launcher icons are invisible after upgrade from 11.10 to 12.04

  - by Clo Knibbe

  I am re-purposing an old laptop. I installed 11.10 on it and then immediately upgraded to 12.04. (I could not directly install 12.04 as my system does not support PAE.) When my system was (briefly) 11.10, the desktop appeared as expected. However, after the upgrade to 12.04, the icons in the launcher area are invisible. If I hover over the spot where the icon should be the little popup window showing the tool's name appears, and I can click to invoke the tool. I just cannot see the icons. ![invisible icons in launcher][1] The icons do appear as expected in other contexts, for example in the Home folder and in Dash Home. My theme is "Ambiance (default)" I do not have a ~/.icons folder. This is the top level contents of /usr/share/icons: default DMZ-Black DMZ-White gnome handhelds hicolor HighContrast HighContrastInverse Humanity Humanity-Dark locolor LoginIcons LowContrast redglass ubuntu-mono-dark ubuntu-mono-light unity-icon-theme whiteglass (Sorry for the poor formatting, can't get it to show in list.) I suspect that the launcher isn't looking for the icons in the right place, but I don't know how to confirm that, or how to correct. This is my first foray into Linux, although I used to use Unix a few decades ago. This doesn't look much like my old Sun workstation, though! Does anyone have any suggestions or insights for me? Thanks.

  Read the article

• How to suggest changes as a recently-hired employee ?

  - by ereOn

  Hi, I was recently hired in a big company (thousands of people, to give an idea of the size). They said they hired me because of my rigor and because I was, despite my youngness (i'm 25), experienced as a C/C++ programer. Now that I'm in, I can see that the whole system is old and often uses obsolete technologies. There is no naming convention (files, functions, variables, ...), they don't use Version Control, don't use exceptions or polymorphism and it seems like almost everybody lost his passion (some of them are only 30 years old). I'd like to suggest somes changes but i don't want to be "the new guy that wants to change everything just because he doesn't want to fit in". I tried to "fit in", but actually, It takes me one week to do what I would do in one afternoon, just because of the poor tools we're forced to use. A lot my collegues never look at the new "things" and techniques that people use nowadays. It's like they just given up. The situation is really frustrating. Have you ever been in a similar situation and, if so, what advices would you give me ? Is there a subtle way of changing things without becoming the black sheep here ? Or should I just give up my passion and energy as well ? Thank you. Updates Just in case (if anyone cares): following your precious advices I was able to suggest changes and am now in charge of the team that must create and deploy Subversion :D Thanks to all of you !

  Read the article

• Grid Based Lighting in XNA/Monogame

  - by sm81095

  I know that questions like this have been asked many times, but I have not found one exactly like this yes. I have implemented a top-down grid based world in Monogame, and am starting on the lighting system soon. How I want to do lighting is to have a grid that is 4 times wider and higher, basically splitting each world tile into a 4x4 system of "subtiles". I would like to use a flow like system to spread light across the tiles by reducing the light by a small amount each time. This is kind of the effect I was going for: http://i.imgur.com/rv8LCxZ.png The black grid lines are the light grid, and the red lines are the actual tile grid, and the light drop-off is very exaggerated. I plan to render the world by drawing the unlit grid to a separate RenderTarget2D, then rendering the lighting grid to a separate target and overlaying the two. Basically, my questions are: What would be the algorithm for a flow style lighting system like this? Would there be a more efficient way of rendering this? How would I handle the darkening of the light with colors, reducing the RGB values in each grid, or reducing the alpha in each grid, assuming that I render the light map over the grid using blending? Even assuming the former are possible, what BlendState would I use for that?

  Read the article

• Banshee doesn't like opening websites

  - by Allan

  I have come across two bugs (which will be added to launchpad if it's not resolved here) When I open any of the websites in Banshee Amazon or Miro Guide as soon as the site is finished loading it crashes Banshee. If I play any video local or remote it will show 1 frame maybe 0.5 sec of video then I get a black screen and audio continues in the backgound. Specs & Details I have a Fujitsu Amilo 1718 laptop with 2 gig of ram (original 1 gig) graphics is provided by ATI Radeon Xpress 200M (don't laugh it works with compiz....just) I have a link to the output of banshee --debug Here Don't have time to read? Here are the Highlights [2 Warn 11:52:34.814] Caught an exception - System.ArgumentNullException: Argument cannot be null. then abit later Debug info from gdb: Could not attach to process. If your uid matches the uid of the target process, check the setting of /proc/sys/kernel/yama/ptrace_scope, or try again as the root user. For more details, see /etc/sysctl.d/10-ptrace.conf ptrace: Operation not permitted. ================================================================= Got a SIGSEGV while executing native code. This usually indicates a fatal error in the mono runtime or one of the native libraries used by your application. ================================================================= Aborted Not music to my ears as you can expect. The version I am using is 1.9.4 from the daily ppa but these bugs happen in any version of banshee from 1.8.1 and up. So if any one has come across a fix for this problem please share!! additional info Both VLC and Miro work on my system so there isn't a system wide problem with video and I haven't mentioned mono so no trolling it will get voted down.

  Read the article

• How to make my simple round sprite look right in XNA

  - by Joshua Perina

  Ok, I'm very new to graphics programming (but not new to coding). I'm trying to load a simple image in XNA which I can do fine. It is a simple round circle which I made in photoshop. The problem is the edges show up rough when I draw it on the screen even with the exact size. The anti-aliasing is missing. I'm sure I'm missing something very simple: GraphicsDevice.Clear(Color.Black); // TODO: Add your drawing code here spriteBatch.Begin(); spriteBatch.Draw(circle, new Rectangle(10, 10, 10, 10), Color.White); spriteBatch.End(); Couldn't post picture because I'm a first time poster. But my smooth png circle has rough edges. So I found that if I added: spriteBatch.Begin(SpriteSortMode.FrontToBack, BlendState.NonPremultiplied); I can get a smooth image when the image is the same size as the original png. But if I want to scale that image up or down then the rough edges return. How do I get XNA to smoothly resize my simple round image to a smaller size without getting the rough edges?

  Read the article

• How to turn off screen (DPMS) together with locking session in KDE?

  - by gertvdijk

  First of all, I'm aware a similar question for GNOME is asked here: "Switch off laptop backlight when locking screen". Objective I would like to turn off my screen on locking the session for power saving reasons. Actual problem Locking the screen on Kubuntu (KDE) inevitably triggers the screensaver as far as I can see. There's no screensaver option other than 'Blank screen' together with its background colour set to black that comes just close to my goal. It blanks the screen, but doesn't turn off the screen. Screen's backlight will still be on and not saving any power. Current workaround A workaround via a script + shortcut key is possible, however, it's just a workaround since it doesn't trigger on all ways to lock the session. Therefore, I think it should be possible to have it done more elegantly, for example by providing this option in KDE's configuration dialog of the screensaver. The workaround I am now using is the following. A script that locks the screen and turns off the screen: #!/bin/bash qdbus org.freedesktop.ScreenSaver /ScreenSaver Lock xset dpms force standby and let it run with a shortcut key via a custom menu entry. It works. Here's why I consider it to be a workaround rather than a solution. It doesn't work for other ways to trigger the locking of the session. My actual question(s) Do I need to touching/patching KDE's source? If not what are my options? If so, could someone point me to where I can get started? what do you think is the recommended place in the GUI for configuration? I'm using Kubuntu 12.04 and willing to upgrade to KDE 4.9 or waiting for the 12.10 release.

  Read the article

• How to fix the boot set up?

  - by Chris

  I got two OSes in my PC, Ubuntu and Windows 7. Until yesterday Windows 7 was on top of my dual-boot menu list, but I wanted to change it, so I went inside Windows configurations and put Ubuntu first, but I also set the time to 0 because I thought I could access Windows through Grub. But what happens is that after I upgraded Ubuntu to 11.10, that screen with boot options don't show Windows 7 anymore. I went online searching for a solution to my problem, most of them told me to configure some Grub options and others to use programs to do it. I've done them all and still can't access Windows 7. Just in case my problem is not clear yet, this is how was my boot order before I messed it all up: Windows 7 Ubuntu with a time of 10 secs to choose between both. This is how I wanted it to be: Ubuntu Windows 7 with 0 time to choose, but, inside Ubuntu I could access Windows through that Grub screen. But this is what happens: Ubuntu Windows 7 0 time, so it don't let me choose anything and jumps inside Ubuntu then inside Ubuntu grub doesn't show up anymore (black screen) and it starts Ubuntu normally. I tried to fix this many times from different ways inside Ubuntu but nothing worked, also when I try do something and then upgrade my grub with sudo upgrade-grub it shows this message: Generating grub.cfg ... Found Windows 7 (loader) on /dev/sda1 Skipping Windows 7 (loader) on Wubi system Found linux image: /boot/vmlinuz-3.0.0-12-generic Found initrd image: /boot/initrd.img-3.0.0-12-generic Found linux image: /boot/vmlinuz-2.6.38-12-generic Found initrd image: /boot/initrd.img-2.6.38-12-generic done Thats why in the title I said it could probably be my WUBI messing all up. Anyone heave a solution for this? Do you need more information? I have a netbook so I cannot use the Windows Repair CD.

  Read the article

• XNA 4.0 - Purple/Pink Tint Over All Sprites After Viewing in FullScreen

  - by D. Dubya

  I'm a noob to the game dev world and recently finished the 2D XNA tutorial from http://www.pluralsight.com. Everything was perfect until I decided to try the game in Fullscreen mode. The following code was added to the Game1 constructor. graphics.PreferredBackBufferWidth = 800; graphics.PreferredBackBufferHeight = 480; graphics.IsFullScreen = true; As soon as it launched in Fullscreen, I noticed that the entire game was tinted. None of the colours were appearing as they should. That code was removed, the game then launched in the 800x480 window, however the tint remained. I commented out all my Draw code so that all that was left was GraphicsDevice.Clear(Color.CornflowerBlue); //spriteBatch.Begin(); //gameState.Draw(spriteBatch, false); //spriteBatch.End(); //spriteBatch.Begin(SpriteSortMode.Deferred, BlendState.Additive); //gameState.Draw(spriteBatch, true); //spriteBatch.End(); base.Draw(gameTime); The result was an empty window that was tinted Purple, not Blue. I changed the GraphicsDevice.Clear colour to Color.White and the window was tinted Pink. Color.Transparent gave a Black window. Even tried rebooting my PC but the 'tint' still remains. I'm at a loss here.

  Read the article

• Oracle Customer Experience (CX) Solutions Make Retailers Merry

  - by Tuula Fai

  Tis the season to be jolly. If you’re a retailer, your level of jolliness depends on sales. So you watch trends like U.S. store traffic increasing 3.5% to 308 million on Black Friday but sales actually falling 1.8% to $11.2 billion. Fortunately, by the end of November, retail sales were up 3.7% over the previous year, thanks to life recovering after Hurricane Sandy. And online sales topped $1 billion for the first time ever! Who are the companies improving their sales online? They are big names like Walgreen’s Drugstore.com, Nordstrom’s HauteLook, and Intuit. More importantly, how are they doing it? They use cutting-edge business practices enabled by Oracle’s CX Cloud Service & Support solutions to: Increase conversions rates and order sizes (Customer Acquisition) Enhance customer satisfaction and loyalty (Customer Retention) Reduce contact center costs and improve agent productivity (Operational Efficiency). Acquisition + Retention + Operational Efficiency = Sustainable Growth and Profits. That’s the magic formula for retail customer service success. Don’t take our word for it. Look at the results of these Oracle customers: Walgreen’s Drugstore—30% sales conversion rate on chat sessions with 20% increase in shopping cart size Nordstrom’s HauteLook—40,000+ interactions per month—20% growth over last year— efficiently managed by 40 agents, with no increase in IT costs Intuit—50% increase in customer satisfaction and 70% decrease in cost per interaction Using Oracle’s CX Cloud & Service solutions, these retailers deliver consistent, relevant, and personalized experiences across all touchpoints, including social, mobile, and web. Their ability to connect with customers anytime, anywhere—providing the right answer at the right time—helps them create a defensible advantage in the marketplace. Want to learn more? Please visit http://www.oracle.com/goto/cloudlaunchpad for free resources on delivering exceptional customer service in the Cloud. Also, watch our YouTube channel to learn more about seamless multichannel retail and Winston Furnishings’ exceptional customer experience.

  Read the article

• Triangulating a partially triangulated mesh (2D)

  - by teodron

  Referring to the above exhibits, this is the scenario I am working with: starting with a planar graph (in my case, a 2D mesh) with a given triangulation, based on a certain criterion, the graph nodes are labeled as RED and BLACK. (A) a subgraph containing all the RED nodes (with edges between only the directly connected neighbours) is formed (note: although this figure shows a tree forming, it may well happen that the subgraph contain loops) (B) Problem: I need to quickly build a triangulation around the subgraph (e.g. as shown in figure C), but under the constraint that I have to keep the already present edges in the final result. Question: Is there a fast way of achieving this given a partially triangulated mesh? Ideally, the complexity should be in the O(n) class. Some side-remarks: it would be nice for the triangulation algorithm to take into account a certain vertex priority when adding edges (e.g. it should always try to build a "1-ring" structure around the most important nodes first - I can implement iteratively such a routine, but it's O(n^2) ). it would also be nice to reflect somehow the "hop distance" when adding edges: add edges first between the nodes that were "closer" to each other given the start topology. Nevertheless, disregarding the remarks, is there an already known scenario similar to this one where a triangulation is built upon a partially given set of triangles/edges?

  Read the article

• Problem with installing Nvidia display drivers on Ubuntu 13.10

  - by Pascal

  Hello everyone and thank you for taking a look at this topic! I'm currently trying out Ubuntu 13.10 but I keep hitting a wall when it comes to installing a driver. I've tried: sudo apt-get install nvidia-current This resulted in a un-bootable system. The screen just stayed black and the cursor displayed as an 'X'. After that I did had to re-install Ubuntu. The computer I'm using is an Acer-Aspire-V3 with a build in Nvidia geforce GT 630M and also with a Intel HD graphics chip-set (not sure if chip-set is the right word here). "lspci | grep VGA" output: pascal@pascal-Aspire-V3-571G:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108M [GeForce GT 630M] (rev a1) I've searched a bit here and there and found out that it would be wise to mention that this laptop is using (or so I think) Nvidia Optimus, not sure if it will add anything to the subject but at least I'll mention it just to be sure. Now to the questions: Q1 How is this caused and how can I fix it? Q2 What additional information could I provide to help you help me?

  Read the article

• The most efficent ways for drawing lines all day long with OpenGL

  - by nkint

  I'd like to put a computer screen that is running an OpenGL programs in a room. It has to run all day long (not in the night). I'd like to draw lines that are slowly fading in the background. The setting is simple: a uniform color background (say, black) and colored lines (say, white) that are slowly fading out. With slowly I mean.. hours. Say that the first line I draw is with alpha 255 (fully visible), after one hours is 240. After 10 hours is 105. One line could have 250 points and there will be like 300 line in one day. For now I have done a prototype with very rudimentary method like: glBegin( GL_LINE_STRIP ); iterator = point_list.begin(); for (++iterator, end = point_list.end(); iterator != end; ++iterator) { const Vec3D &v = *iterator; glVertex2f(v.x(), v.y()); } glEnd(); More efficient method?

  Read the article

• Missing launcher after 12.04 upgrade

  - by Preston Zacharias

  I recently upgraded to ubuntu 12.04 and after doing some updates and such my application launcher and title bars (for window dialogues) are missing. Basically the entire unity GUI is missing! Not sure what happened so I installed gnome 3 and it was missing a launcher too, but did have title bars. In addition the bar found at the top that lets you know what's open and allows gnome extensions to be displayed is not interactive. I can't click, right click, alt + click (right or left), alt + super click (right or left) anywhere! I even installed an application menu from the gnome site and it is not interactive either. However, since there is no way to launch applications i have to use terminal and if i minimize an app it will disappear completely. Then i decided to try unity 2D and it is incredibly messed up. Black background, launcher is there but icons and top bar while on desktop are completely distorted. They're not just pixalated; they're all sorts of funky colors and when i open something from unity 2d launcher it will show it's opened in the launcher but nothing appears on my screen. When trying to view videos on youtube the video is distorted and looks just as unity 2d does. Strange enough: the audio works fine, just not videos. Pictures loads, but not ads that stream video. Any suggestions to get my launcher and the unity GUI back? I tried reinstalling gnome, unity 3d, and unity 2d from terminal. no change. also reinstalled unity desktop and tried resetting it: nothing happened.

  Read the article

• Is SSD TRIM support still automatic in 12.10?

  - by dam

  Folks I had automatic TRIM working on my laptop running Ubuntu Precise. As in the TRIM guide I added discard to mount options in /etc/fstab, and hdparm --read-sector read 0s immediately after a rm && sync. Using the very same hardware, laptop and SSD, TRIM seems no longer to be automatic after upgrading to Quantal. I recognise the test in the guide I mentioned above may not necessarily work. SSD erase blocks and all that. But Quantal is at least different. After deleting the file and syncing, its data are still on disk and unerased even after waiting several minutes. fstrim will then 0 the dead file's blocks. Once. Repeat the same test five minutes later, and fstrim does nothing. I figure this is probably really a kernel issue, but that box is too black for my spelunking torch. I'm prepared to believe that kernel 3.5 knows what I want better than I do, and all is well despite appearances, but it looks for all the world like TRIM isn't quite all there any more. Anybody have the scoop on TRIM in Quantal/kernel 3.5?

  Read the article

• Should one reject over-scoped projects?

  - by Little Child

  I spoke to my first potential client today and he told me about the requirements of his project - an Android app. He is a well-known designer / photographer in my country and now wants me to "convert the website into an app, custom-tailored". So the requirements, details stripped out, are as follows: eCommerce Aggregating all his content like videos, blogs, tweets, etc. into the app Live streaming any of his studio demos Augmented reality. So that people can see what his painting will look like on their wall before they buy it Taxi Sharing Now, for a freelance project, it seems too over-scoped. I am not saying that I cannot do it. I can. But let me be realistic: There is a steep learning curve when it comes to VR. I am not a tester. I have never white-box tested my own apps. I always black-box test. Since he is a renowned artist, something short of perfect might harm his public image So, I asked him for 2 weeks' worth of time before I give him the final answer. Now knowing whom to consult for advise, I am posting the question here. Although interesting and personally challenging, I am split-minded about accepting a project like this. I will be the only developer for this. Should one reject a project that seems to be over-scoped for one's own abilities?

  Read the article

• Ubuntu 13.10, kernel 3.11 blank screen issue with hybrid graphics

  - by Lagerbaer

  On my HP Envy, which has both an Intel on-chip graphics card and an Nvidia Geforce: *-display UNCLAIMED description: 3D controller product: GK208M [GeForce GT 740M] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: cap_list configuration: latency=0 resources: memory:d2000000-d2ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:5000(size=128) memory:b2000000-b207ffff *-display description: VGA compatible controller product: 4th Gen Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 06 width: 64 bits clock: 33MHz capabilities: vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d3000000-d33fffff memory:c0000000-cfffffff ioport:6000(size=64) I have trouble with all newer kernels. I basically had to install 12.04 LTS and use their 3.5 kernel family to get the system to boot. The 3.8 from 12.10 or the newest 3.11 from Ubuntu 13.10 leave me with a black screen upon boot. On one occasion I did hear the "log in" sound, but the screen did not display anything. I have purged all nvidia drivers so I guess it should just use the intel drivers, but apparently this is all messed up with newer kernel versions. This is different from the other "nvidia boots into blank screen" bug in that I don't rely solely on an nvidia card. Surely the intel on-chip card should be supported and leave me with something different from a blank screen? Again, it only works with kernel versions 3.5.0-41-generic, not with the 3.11.0-12 one that ships with Ubuntu 13.10. When I go into the grub menu and change the boot options from 'quiet splash' to 'nomodeset' I am able to boot the system, but then I don't get any graphics and trying 'sudo service lightdm start' doesn't succeed (I get 100% CPU for apport, but this doesn't do anything either, so I kill it). Help, I'm all out of ideas. EDIT: Let me add that I'm using the EFI boot system and have a dual-boot installation with Windows 8.

  Read the article

• My game seems to be incompatible with recording software. What could be causing this?

  - by Lewis Wakeford

  I've just finished a little Game-Dev project for university and I need to record a video to accompany my submission (just in case they can't get my source to work). Basically my game doesn't work at all when FRAPS or Bandicam attempts to attach to it, I get a black screen and a stream of GL INVALID OPERATION messages from my error reporting code. Dxtory can't seem to hook into it correctly at all, it doesn't display it's FPS counter or anything. My game logic appears to be running correctly from the debug traces, it just seems like all the gl library calls break. I don't know a huge amount about how these programs operate so I don't really know what I could be doing to cause this. I've heard they read from the OpenGL frame buffers so maybe I'm doing something wrong there? I'm letting GLFW and GLEW do all the low level initialization, but I have successfully recorded projects with the same setup and recording software. Essentially, has anyone ever run into something like this before or do you know anything about how these programs work that could give a clue as to the cause of the issue?

  Read the article

• Software Manager who makes developers do Project Management

  - by hdman

  I'm a software developer working in an embedded systems company. We have a Project Manager, who takes care of the overall project schedule (including electrical, quality, software and manufacturing) hence his software schedule is very brief. We also have a Software Manager, who's my boss. He makes me write and maintain the software schedule, design documents (high and low level design), SRS, change management, verification plans and reports, release management, reviews, and ofcourse the software. We only have one Test Engineer for the whole software team (10 members), and at any given time, there are a couple of projects going on. I'm spending 80% of my time making these documents. My boss comes from a Process background, and believes what we need is better documentation to improve software: (1) He considers the design to be paramount, coding is "just writing the design down", it shouldn't take too long, and "all the code should be written before the hardware is ready". (2) Doesn't understand the difference between a Central & Distributed Version control, even after we told him its easier to collaborate with a distributed model. (3) Doesn't understand code, and wants to understand every bug and its proposed solution. (4) Believes verification should be done by developer, and validation by the Tester. Thing is though, our verification only checks if implementation is correct (we don't write unit tests, its never considered in the schedule), and validation is black box testing, so the units tests are missing. I'm really confused. (1) Am I responsible for maintaining all these documents? It makes me feel like I'm doing the Software Project Management, in essence. (2) I don't really like creating documents, I want to solve problems and write code. In my experience, creating design documents only helps to an extent, its never the solution to better or faster code. (3) I feel the boss doesn't really care about making better products, but only about being a good manager in the eyes of the management. What can I do?

  Read the article

• How to move ubuntu 12.04 on another drive

  - by Maksim

  How I can move my ubuntu on another drive? I know about clonezilla but problem is that destination drive is smaller the source one. Gparted can't copy-paste partition if destination not the end last partition. I tried dpkg --selected-packages and apt-clone. First one just not install all my packages and removed existed that now I have no full unity and not my all packages. Second one just fail on configuration package. But before I did that way I copy-paste my /etc to new system. My partition table destination : gpt 1 1049kB 106MB 105MB fat32 EFI System ??????????? 2 106MB 12,1GB 12,0GB ext4 3 12,1GB 66,3GB 54,2GB ext4 source: msdos 1 1049kB 12,0GB 12,0GB primary ext4 ??????????? 2 12,0GB 492GB 480GB primary ext4 3 492GB 500GB 8107MB primary linux-swap(v1) Gpt not working with ubuntu that use grub 1.99. I don't know why but my laptop can't boot any device with uefi just black screen and ubuntu detect it on fresh install.

  Read the article

• Ubuntu won't start - blank screen with flashing white cursor

  - by loomy

  My laptop is dual-booted with Windows 8 on one partition and Ubuntu 12.04.3 on the other. I've searched for my issue already, but nothing I've found so far has solved the problem. Since last week, when I try to boot Ubuntu from GRUB, I am taken to a purple screen (as usual), but then to a black screen with a blinking white _ cursor. I've tried leaving it, but nothing else happens. When I hold Shift and edit the GRUB entry to change 'quiet slash' to 'text', the back screen instead asks for my login and password. When I put them in, it tells me the date of my last logon, and then waits for further commands. Being very very new to Ubuntu, I have no idea at all what to try out at this point. I tried to launch FailsafeX, but while that was beginning, it said "unable to run server /usr/bin/x" No such file or directory", then shortly after returned to the recovery mode menu. Pressing Ctrl+Alt+Delete goes through an Ubuntu loading screen, then the laptop then restarts. Any suggestions will be very appreciated, and apologies if this is a common issue that has been answered a million times before.

  Read the article

• Why are "Inverted Colors" considered an accessibility feature? [migrated]

  - by RLH

  Why is it that in Apple software (OS X and iOS,) the "Inverted Colors" display feature is considered an accessibility option? I understand that some users are color-blind. This would justify the Black & White, or grey-scale modes. What I don't understand is how or why does inverting the display color help someone with any specific, visual impairment or dysfunction. As a programmer that wants to understand the need so that I can develop better, accessible software, what purpose does this feature serve to the end user who has some form of visual impairment? NOTE: I felt that this was a hard question to categorize on StackExchange. I settled here on Programmers because I assume that questions of accessibility are important to all developers and this question sits somewhere in the middle between topics that StackOverflow and SuperUser may cover. Also, this question isn't specific to Apple software. I've just noticed that this feature has been available on Macs for a very long time, it's a feature on iOS, and it's always associated with the Accessibility settings. If I can garner some information regarding the needs of some users, I think that I can develop better, accessible software.

  Read the article

• How do I install the nvidia driver for a GeForce 9300M?

  - by Alex

  Yesterday i've installed ubuntu 11.04 (instead of 10.10). And i need to install nvidia driver which supports opengl 3.3 In 10.10 i did it in a such way: Ctrl+alt+f1 login sudo /etc/init.d/gdm stop sudo sh driver.run startx Not it doesn't work. Because ctrl+alt+f1 doesn't show login screen. Just only black screen. I've googled this problem. Some people have it but no one knows how to solve. Sometimes people say that it is connected with video card or driver. But i have GeForce 9300M G, and i've activated a standard driver. Anyway, it worked in 10.10, but doesn't work now. The main problem is that i need to kill xserver to install this driver. killing the process just only restarts xserver. Also, I've tried to /etc/init.d/gdm stop in GUI-console. It says that "Fake initctl,doing nothing". Google didn't helped in this case too. Any ideas to install that driver?

  Read the article

• How to prevent showing outside of world game in Cocos2D-x

  - by HRZ

  I'm trying to make a tower defense game and it can zoom in/out and scrolling over my world map. How to scroll over the game and how to restrict it not to show outside of my map(black area). At below I scroll over the map by using CCCamera but I don't know how I can restrict it. CCPoint tap = touch->getLocation(); CCPoint prev_tap = touch->getPreviousLocation(); CCPoint sub_point = tap - prev_tap; float xNewPos, yNewPos; float xEyePos, yEyePos, zEyePos; float cameraPosX, cameraPosY, cameraPosZ; // First we get the current camera position. GameLayer->getCamera()->getCenterXYZ(&cameraPosX, &cameraPosY, &cameraPosZ); GameLayer->getCamera()->getEyeXYZ(&xEyePos, &yEyePos, &zEyePos); // Calculate the new position xNewPos = cameraPosX - sub_point.x; yNewPos = cameraPosY - sub_point.y; GameLayer->getCamera()->setCenterXYZ(xNewPos, yNewPos, cameraPosZ); GameLayer->getCamera()->setEyeXYZ(xNewPos, yNewPos, zEyePos); And for zooming I used such code: GameLayer->setScale(GameLayer->getScale() + 0.002); //zooming in

  Read the article

• Convert table to table with autofilter/order by function [on hold]

  - by evachristine

  How can I make any normal HTML table: <table border=1 style='border:2px solid black;border-collapse:collapse;'><tr><td>foo1</td><td>foo2</td><td>foo3</td><td>foo3</td><td>foo4</td><td>foo5</td><td>foo6</td></tr> <tr><td><a href="https://foo.com/adsf">adsf</a></td><td>ksjdajsfljdsaljfxycaqrf</td><td><a href="mailto:[email protected]?Subject=adsf - ksjdajsfljdsaljfxycaqrf">[email protected]</a></td><td>nmasdfdsadfafd</td><td>INPROG</td><td>3</td><td>2014-03-04 10:37</td> <tr><td><a href="https://foo.com/adsflkjsadlf">adsflkjsadlf</a></td><td>alksjdlsadjfyxcvyx</td><td><a href="mailto:[email protected]?Subject=adsflkjsadlf - alksjdlsadjfyxcvyx">[email protected]</a></td><td>nmasdfdsadfafd</td><td>INPROG</td><td>3</td><td>2014-04-24 00:00</td> <tr><td><a href="https://foo.com/asdfasdfsadf">asdfasdfsadf</a></td><td>jdsalajslkfjyxcgrearafs</td><td><a href="mailto:[email protected]?Subject=asdfasdfsadf - jdsalajslkfjyxcgrearafs">[email protected]</a></td><td>nmasdfdsadfafd</td><td>INPROG</td><td>3</td><td>2014-04-24 00:00</td> </table> to a table what's first row (ex.: foo1; foo2; foo3, etc..) is clickable in a way that it will make the columns in order, ex.: order by foo2, etc. Just like an order by in an XLS. (extra: how in the hell can I put autofilter too?:D )

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >