Search Results

Search found 45542 results on 1822 pages for 'enable add ons'.

Page 156/1822 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

  • How can I add usbip modules on Redhat 6 kernel?

    - by Gk.
    I have RHEL 6 with # uname -r 2.6.32-131.0.15.el6.x86_64 I'm trying to build usbip modules on staging driver. Everything is OK. I have all needed *.ko files. But I cannot add those modules on running kernel. # pwd /lib/modules/2.6.32-131.0.15.el6.x86_64 # ls | grep ko usbip_common_mod.ko usbip.ko vhci-hcd.ko # modprobe usbip FATAL: Error inserting usbip (/lib/modules/2.6.32-131.0.15.el6.x86_64/usbip.ko): Required key not available # insmod usbip.ko insmod: error inserting 'usbip.ko': -1 Required key not available How can I add it? Do I need to rebuild whole kernel? TIA, giobuon

    Read the article

  • How to fix network connection dead on startup, but okay after disable/enable?

    - by bill weaver
    on Startup When my system starts up, the internet connection is dead. This causes various problems with startup items such as updates and auto-start programs failing. However, the connection is fine after going into Network and Sharing, Change adapter settings, then disabling and re-enabling the adapter. Any suggestions on why this is happening and how to fix it? System summary: Windows 7, 64 bit, Realtek PCIe GBE Family Controller, Linksys WRT610N router, Sci Atlanta cable modem.

    Read the article

  • How to add the Windows defender(MS essential) in Windows explorer right click menu to scan a particular drive/folder on demand?

    - by avirk
    As we have inbuilt antivirus like Windows defender in Windows 8 now, I called it antivirus because it has embedded option of MS essential as well. But there is no option to scan a particular drive on demand by right click on it in windows explore as we had in Windows 7 with MS essential or like other antiviruses. I know we can run a custom scan for the particular drive or specific folder but that process is too lengthy and time consuming. This guide explain that how we can add the Windows Defender in the desktop right click menu, so I'm curious is there a way to add it in the Windows explorer right click menu to launch a search whenever I need to.

    Read the article

  • How do I enable PHP’s flush() with nginx+PHP-FPM?

    - by abrahamvegh
    I’m using nginx with PHP-FPM (APC is installed). I need PHP’s flush() to work. Is this possible? Things I’ve tried so far: Disabling all output buffering in php.ini, as well as output compression. Disabling gzip in nginx’s configuration. Setting nginx’s fastcgi_* buffering settings and fastcgi_max_temp_file_size to zero. I’m sure I must be missing something, since I’ve run across many posts here and elsewhere where people claimed they’ve got it working, but I’m having no luck, it would seem.

    Read the article

  • How Do I Enable My Ubuntu Server To Host Various SSL-Enabled Websites?

    - by Andy Ibanez
    Actually, I Have looked around for a few hours now, but I can't get this to work. The main problem I'm having is that only one out of two sites works. I have my website which will mostly be used for an app. It's called atajosapp.com . atajosapp.com will have three main sites: www.atajosapp.com <- Homepage for the app. auth.atajosapp.com <- Login endpoint for my API (needs SSL) api.atajosapp.com <- Main endpoint for my API (needs SSL). If you attempt to access api.atajosapp.com it works. It will throw you a 403 error and a JSON output, but that's fully intentional. If you try to access auth.atajosapp.com however, the site simply doesn't load. Chrome complains with: The webpage at https://auth.atajosapp.com/ might be temporarily down or it may have moved permanently to a new web address. Error code: ERR_TUNNEL_CONNECTION_FAILED But the website IS there. If you try to access www.atajosapp.com or any other HTTP site, it connects fine. It just doesn't like dealing with more than one HTTPS websites, it seems. The VirtualHost for api.atajosapp.com looks like this: <VirtualHost *:443> DocumentRoot /var/www/api.atajosapp.com ServerName api.atajosapp.com SSLEngine on SSLCertificateFile /certificates/STAR_atajosapp_com.crt SSLCertificateKeyFile /certificates/star_atajosapp_com.key SSLCertificateChainFile /certificates/PositiveSSLCA2.crt </VirtualHost> auth.atajosapp.com Looks very similar: <VirtualHost *:443> DocumentRoot /var/www/auth.atajosapp.com ServerName auth.atajosapp.com SSLEngine on SSLCertificateFile /certificates/STAR_atajosapp_com.crt SSLCertificateKeyFile /certificates/star_atajosapp_com.key SSLCertificateChainFile /certificates/PositiveSSLCA2.crt </VirtualHost> Now I have found many websites that talk about possible solutions. At first, I was getting a message like this: _default_ VirtualHost overlap on port 443, the first has precedence But after googling for hours, I managed to solve it by editing both apache2.conf and ports.conf. This is the last thing I added to ports.conf: <IfModule mod_ssl.c> NameVirtualHost *:443 # SSL name based virtual hosts are not yet supported, therefore no # NameVirtualHost statement here NameVirtualHost *:443 Listen 443 </IfModule> Still, right now only api.atajosapp.com and www.atajosapp.com are working. I still can't access auth.atajosapp.com. When I check the error log, I see this: Init: Name-based SSL virtual hosts only work for clients with TLS server name indication support (RFC 4366) I don't know what else to do to make both sites work fine on this. I purchased a Wildcard SSL certificate from Comodo that supposedly secures *.atajosapp.com, so after hours trying and googling, I don't know what's wrong anymore. Any help will be really appreciated. EDIT: I just ran the apachectl -t -D DUMP_VHOSTS command and this is the output. Can't make much sense of it...: root@atajosapp:/# apachectl -t -D DUMP_VHOSTS apache2: Could not reliably determine the server's fully qualified domain name, using atajosapp.com for ServerName [Thu Nov 07 02:01:24 2013] [warn] NameVirtualHost *:443 has no VirtualHosts VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:443 is a NameVirtualHost default server api.atajosapp.com (/etc/apache2/sites-enabled/api.atajosapp.com:1) port 443 namevhost api.atajosapp.com (/etc/apache2/sites-enabled/api.atajosapp.com:1) port 443 namevhost auth.atajosapp.com (/etc/apache2/sites-enabled/auth.atajosapp.com:1) *:80 is a NameVirtualHost default server atajosapp.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost atajosapp.com (/etc/apache2/sites-enabled/000-default:1)

    Read the article

  • Enable basic auth sitewide and disabling it for subpages?

    - by piquadrat
    I have a relatively straight forward config: upstream appserver-1 { server unix:/var/www/example.com/app/tmp/gunicorn.sock fail_timeout=0; } server { listen 80; server_name example.com; location / { proxy_pass http://appserver-1; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; auth_basic "Restricted"; auth_basic_user_file /path/to/htpasswd; } location /api/ { auth_basic off; } } The goal is to use basic auth on the whole website, except on the /api/ subtree. While it does work with respect to basic auth, other directives like proxy_pass are not in effect on /api/ as well. Is it possible to just disable basic auth while retaining the other directives without copy&pasting everything?

    Read the article

  • How to add authentication to ssh dynamic port forwarding?

    - by Aalex Gabi
    I am using ssh as a SOCKS server by running this command on the server: ssh -f2qTnND *:1080 root@localhost There is one problem: anybody can connect to the server and use it's internet connection. Options: To use iptables to filter access to the server, but I connect to the server from various non-statically allocated IP addresses so I would have to edit very frequently those filters which can be annoying. To install a SOCKS server on the remote. Ultimately this is the last option if there is no other simpler way to do it. (I am very lazy) Launching the same command on clients machines. The problem here is that some clients don't run on Linux and it is awkward to set up the tunnel (Windows + Putty). Is there a way to add authentication to a SOCKS server made using ssh? Bonus question: How to add encryption between the client and the server (made using ssh)?

    Read the article

  • Word 2010,Add bunch of words in paragraph in one step to spell checker dictionary?

    - by hasanghaforian
    I have to create Documents in about my project that is written in about Android.I use Word 2010 and I copy some lines of my code into the Word doc then I add my descriptions.My problem is huge number of error of spell checker of Word that arises in each paragraph(lines that I paste them from my code into Word).For example it may be used setSpan,removeSpan and ... in my codes and spell checker show red underline under all of them.You can see huge number of errors in a few lines that I paste them: Is there a way to add all spell errors to word dictionary at once for selected area?

    Read the article

  • How to enable connection security for WMI firewall rules when using VAMT 2.0?

    - by Ondrej Tucny
    I want to use VAMT 2.0 to install product keys and active software in remote machines. Everything works fine as long as the ASync-In, DCOM-In, and WMI-In Windows Firewall rules are enabled and the action is set to Allow the connection. However, when I try using Allow the connection if it is secure (regardless of the connection security option chosen) VAMT won't connect to the remote machine. I tried using wbemtest and the error always is “The RPC server is unavailable”, error code 0x800706ba. How do I setup at least some level of connection security for remote WMI access for VAMT to work? I googled for correct VAMT setup, read the Volume Activation 2.0 Step-by-Step guide, but no luck finding anything about connection security.

    Read the article

  • Disable ability to add startup items in Windows 7?

    - by Gam Erix
    Note: This is not the question "How to disable startup items" because the simple answer is: "Use msconfig". Now as for my question: I recently am very annoyed that some programs add startup items to my PC without my knowledge after installation, I always have 2 programs which startup - Temperature monitor and the Catalyst Control Center Tray. Now, sometimes I install something and it adds startup entries, how can I make sure that no startup entries can be added to windows anymore? So what I would like to do: -Disable adding scheduled tasks (even for administrator accounts, so programs installing from them can't add startup entries too) -Disable adding startup entries to the registry (even for administrators, would changing the permissions in HKLM on the Microsoft\Windows\CurrentVersion\Run to read only be enough?) -Disable all other methods of startup in Windows 7 I don't know -Set default startup of NEW installed services to "Start Manually" instead of/and block "Start Automaticly" and "Start Automaticly (Delayed)" How can I accomplish this? This is also a nice way to prevent most viruses fom running after machine reboot (if this can be accomplished).

    Read the article

  • PDO - WHat is it? How do I enable it on shared hosting.

    - by Keith Groben
    I have a shared hosting account and PHP5 is installed and running. When I view phpinfo, I can see that mysql pdo is running. I think I need to "link" to it from the php.ini file. But I dont know for sure. I read that I needed to type "extension=pdo.so". I did that, and it did nothing. I contacted my hosting support, they said I need to rename php.ini to php5.ini. Did that and nothing. I am stuck and trying to install Kimai, but cannot without fixing this pdo problem. I have searched for a good hour and can find nothing to help me.

    Read the article

  • How can I enable http auth in lighttpd for all directories except one?

    - by Nuri Hodges
    I am trying to authenticate access to everything in webroot (/) except anything that resides in a particular directory (/directory/) and I've tried both of these options to no avail: $HTTP["url"] =~ "^(?!(/directory))" { auth.require = ( "" => ( "method" => "basic", "realm" => "auth to this area", "require" => "user=username" ) ) } $HTTP["url"] != "/directory" { auth.require = ( "" => ( "method" => "basic", "realm" => "auth to this area", "require" => "user=username" ) ) }

    Read the article

  • How do I enable SELinux when booting a ramdisk from a CD/DVD?

    - by JeffG
    I have a bootable DVD which boots the same Kernel as the Hard Drive (which uses SELinux). I have copied /etc/selinux and all kernel modules to my ramdisk, and have tried various combinations of selinux=1 and selinux 1 with enforcing 1 and enforcing 0. as Kernel boot parameters. All files contained in the checkpolicy, libselinux, policycoreutils, selinux-policy and selinux-policy-targeted rpms have also been copied into the ramdisk tree. After the system boots from the ramdisk, I check dmesg: % dmesg | grep -i selinux Kernel command line: initrd=idrd.img ramdisk_size=110476 selinux=1 SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability SElinux: Registering netfilter hooks But SELinux isn't running: % /usr/sbin/getenforce Disabled % /usr/sbin/setenforce 1 /usr/sbin/setenforce: SELinux is disabled Neither /var/log/messages nor /proc/kmsg hold clues.

    Read the article

  • MS Access: Why can I no longer right-click to add a hyperlink?

    - by gef05
    I've been working in an MS Access system for a while now. It's a form system where users enter data, add links, contacts etc. Pretty simple. On the form is a hyperlink field. For months I could right-click the field, and from the popup context menu select Hyperlink Add a hyperlink (something like that). This would allow me to browse to a network location, select a folder, click okay, and have the path automatically added to the field. Then it stopped working. It works fine for everyrone else but not me. What's stranger, if I go to another machine and login, I get the functionality back. Any ideas?

    Read the article

  • Why does my Mac always crash when I enable `ask for password after screensaver ended`?

    - by Koning Baard XIV
    I have enabled these two things: Placing the mouse-pointer in the bottom-left corner of any display makes the screensaver appear After the screensaver or stand-by has ended, ask for password However, this combination always leads to this (Black Screen of Death) after entering the screensaver with the bottom-left corner: Here are my system specs: Hardware Overview: Model Name: iMac Model Identifier: iMac9,1 Processor Name: Intel Core 2 Duo Processor Speed: 2,66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 6 MB Memory: 2 GB Bus Speed: 1,07 GHz Boot ROM Version: IM91.008D.B08 SMC Version (system): 1.44f0 Serial Number (system): W89171JF0TF Hardware UUID: 323A90F0-8A2F-5057-B501-2087489E0DFF System Software Overview: System Version: Mac OS X 10.6.3 (10D573) Kernel Version: Darwin 10.3.0 Boot Volume: Macintosh HD Boot Mode: Normal Computer Name: YOU SHOULD NOT KNOW THIS User Name: YOU SHOULD NOT KNOW THIS Secure Virtual Memory: Not Enabled 64-bit Kernel and Extensions: No Time since boot: 11:46 Can anyone help me? Thanks

    Read the article

  • AIX network parameters to close TCP sockets of unplugged devices

    - by ADD Geek
    Hi there We have an AIX box, running what we call in banking "ATM Switch" not the ATM networking switch, but the bank ATM driver. where we have some ATM machines connected to two server processes. The problem is, when we disconnect any of these machines, the netstat -na| grep <port number> command shows that the socket established for this disconnected device is still established, we have to manually send a command from the software to make the socket aware that it is not live anymore. Is there a parameter on tcp level to make this connection aware within a minute or two that this device is not connected anymore? we had the following parameters set with root privileges: no -o tcp_keepidle=1000 no -o tcp_keepcnt=2 no -o tcp_keepintvl=150 no -o tcp_finwait2=100 it was originally having the default values. but even after we changed these parameters and restarted the server processes, the problem was still there.

    Read the article

  • jboss 4: enable UsersRolesLoginModule, where must users.properties files be placed?

    - by golemwashere
    I have an application (CQ5) that requires enabling unauthenticatedIdentity on jbossdir/conf/login-config.xml I used: <authentication> <login-module code = "org.jboss.security.auth.spi.UsersRolesLoginModule" flag = "required" > <module-option name="unauthenticatedIdentity">nobody</module-option> </login-module> </authentication> then I tried to copy jbossdir/conf/props/jmx-console-users.properties,jmx-console-roles.properties into users.properties and roles.properies (same dir). I still get this error: ERROR [org.jboss.security.auth.spi.UsersRolesLoginModule] Failed to load users/passwords/role files java.io.IOException: No properties file: users.properties or defaults: defaultUsers.properties found where should I put those files?

    Read the article

  • How do I enable SELinux when booting from a CD/DVD?

    - by JeffG
    I have a bootable DVD which boots the same Kernel as the Hard Drive (which uses SELinux). I have copied /etc/selinux and all the kernel modules to my ramdisk, and have tried both selinux=1 and selinux 1 as Kernel boot parameters. After the system boots, I check dmesg: % dmesg | grep -i selinux Kernel command line: initrd=idrd.img ramdisk_size=110476 selinux=1 SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability SElinux: Registering netfilter hooks But SELinux isn't running: % /usr/sbin/getenforce Disabled % /usr/sbin/setenforce 1 /usr/sbin/setenforce: SELinux is disabled /var/log/messages does not hold any clues. /proc/kmsg also has nothing

    Read the article

  • How to add LDAP user to existing local group in RHEL?

    - by Highway of Life
    I'm attempting to add some of our LDAP users to a locally defined group on our RHEL server, however I get an error stating that the LDAP user is not found in /etc/passwd. What would be the best way to allow LDAP users to be added to local groups? My feeling is that this must be done manually. I could edit: /etc/group and add the LDAP group to the list. Would that be ideal? [server]# id apache uid=409(apache) gid=409(apache) groups=409(apache) context=user_u:system_r:unconfined_t:s0 [server]# id john.doe uid=11389(john.doe) gid=6097(ABC_Corporate_US) groups=6097(ABC_Corporate_US) context=user_u:system_r:unconfined_t:s0 [server]# /usr/sbin/usermod -a -G apache john.doe usermod: john.doe not found in /etc/passwd OS: RHEL (Red Hat Enterprise Linux Server release 5.3 (Tikanga)) Note: Updating the OS on this machine is not an option.

    Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >