Search Results

Search found 6164 results on 247 pages for 'sd card'.

Page 156/247 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >

• Dell L501X Display Port Screen issue

  - by jdflorezPA

  I got a Dell XPS L501X with a mini display port to VGA connector for my External Screen. On Displays it shows me: Acer Technologies 24" (which is the monitor) but only lets me up to 1024x768 resolution (The native resolution of this monitor is 1920x1200). I tried adding a new mode with xrandr, but when I applied it, it reverted back to 1024x768. As far as I know, the display port is controlled by the Intel card, right? Any ideas or suggestions would be appreciated. Thanks Using Ubuntu 11.10 32bit

  Read the article

• Packaging "hidden" asset files

  - by ChaimKut

  I'm placing the file '.nomedia' into a folder in order to avoid Android's MediaScanner from detecting the media files in the folder. I need to copy this folder (including '.nomedia') from the APK's assets to the SD card (so other apps can make use of these media files, etc.). When I package the APK in Eclipse, it doesn't package the '.nomedia' file. Presumably it's detecting it as a hidden file. Any ideas how to fix this? Is there a secret aapt flag I can use? I'd like to avoid copying the folder and then manually creating a '.nomedia' folder, if possible.

  Read the article

• Dell Vostro 1510 can't connect to wireless--how can I fix this?

  - by Miss Spider

  I'm having some trouble with my Dell Vostro 1510. I installed wubi on it two days ago and I've only been able to use the Internet with an ethernet cable. The network seems to definitely recognize that the wireless--even other peoples' wireless--is there, but it can't manage to get on. I'll post the lpsci here, so that you can see the Broadcom card I'm working with. I have downloaded the kernel 2.6.39-0-generic, which doesn't appear to have done a lick of work. 06:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

  Read the article

• How do I adjust the resolution on an Intel gma x3100?

  - by Salinski

  I'm with fresh install of 12.04, having gma x3100 as a video card. The problem is I own 19" monitor with native resolution of 1280x1024 but can't force screen resolution on more then 1024x768 ~$ xrandr Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 I been digging up some info for the past 2 days, yet haven't found any solution. Even tried using gdm instead of lightdm. Any help is appreciated.

  Read the article

• Ubuntu frozen on boot screen; boot repair fails due to X11 and gtk

  - by anandsun

  I have a year-old HP Pavilion dv6 with Intel i7 processors and graphics card. I had Windows 7 but last week I dual booted Ubuntu. It was working fine until today. I did the following things: Updated Gnome and installed Gnome tweak tool Uninstalled Chromium browser Uninstalled Google Chrome Moved jdk and jre folders from ~/ to /bin using sudo Moved Adobe folder from ~/ to /bin using sudo Then I restarted. Ubuntu froze for half an hour on the purple boot screen. Something I did must have broken it. So, I hit Ctrl + Alt + F1 and managed to log in through the command line. From there, I ran sudo apt-get update and sudo apt-get upgrade. I also updated grub. I also installed boot-repair. However, I cannot run boot-repair, because I keep getting the following errors: Autolaunch error: X11 initialization failed RuntimeError: Gtk couldn't be initialized.

  Read the article

• installed 12.04 fine. updated graphics driver. now solid puprle screen.

  - by Zephium

  Purchased a new msi ge 70 series labtop. nvidia card gtx 765m. updated driver after install, and ran update manager. All seems well. restarted as required. Now i have a solid purple screen, even if i use boot menu to recovery mode. all i can do is access grub menu 3.10. live cd will run but i get purple screen and cant see choices. please help and im still learning ubuntu. noob talk prefered. i hate making more mistakes. Thanks also tryed changing lines of kernal code using "e" on boot menu, nomodeset and the like. not helping. any way to fix problem through grub?

  Read the article

• Linux server is only using 60% of memory, then swapping

  - by Kamil Kisiel

  I've got a Linux server that's running our bacula backup system. The machine is grinding like mad because it's going heavy in to swap. The problem is, it's only using 60% of its physical memory! Here's the output from free -m: free -m total used free shared buffers cached Mem: 3949 2356 1593 0 0 1 -/+ buffers/cache: 2354 1595 Swap: 7629 1804 5824 and some sample output from vmstat 1: procs -----------memory---------- ---swap-- -----io---- -system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 2 1843536 1634512 0 4188 54 13 2524 666 2 1 1 1 89 9 0 1 11 1845916 1640724 0 388 2700 4816 221880 4879 14409 170721 4 3 63 30 0 0 9 1846096 1643952 0 0 4956 756 174832 804 12357 159306 3 4 63 30 0 0 11 1846104 1643532 0 0 4916 540 174320 580 10609 139960 3 4 64 29 0 0 4 1846084 1640272 0 2336 4080 524 140408 548 9331 118287 3 4 63 30 0 0 8 1846104 1642096 0 1488 2940 432 102516 457 7023 82230 2 4 65 29 0 0 5 1846104 1642268 0 1276 3704 452 126520 452 9494 119612 3 5 65 27 0 3 12 1846104 1641528 0 328 6092 608 187776 636 8269 113059 4 3 64 29 0 2 2 1846084 1640960 0 724 5948 0 111480 0 7751 116370 4 4 63 29 0 0 4 1846100 1641484 0 404 4144 1476 125760 1500 10668 105358 2 3 71 25 0 0 13 1846104 1641932 0 0 5872 828 153808 840 10518 128447 3 4 70 22 0 0 8 1846096 1639172 0 3164 3556 556 74884 580 5082 65362 2 2 73 23 0 1 4 1846080 1638676 0 396 4512 28 50928 44 2672 38277 2 2 80 16 0 0 3 1846080 1628808 0 7132 2636 0 28004 8 1358 14090 0 1 78 20 0 0 2 1844728 1618552 0 11140 7680 0 12740 8 763 2245 0 0 82 18 0 0 2 1837764 1532056 0 101504 2952 0 95644 24 802 3817 0 1 87 12 0 0 11 1842092 1633324 0 4416 1748 10900 143144 11024 6279 134442 3 3 70 24 0 2 6 1846104 1642756 0 0 4768 468 78752 468 4672 60141 2 2 76 20 0 1 12 1846104 1640792 0 236 4752 440 140712 464 7614 99593 3 5 58 34 0 0 3 1846084 1630368 0 6316 5104 0 20336 0 1703 22424 1 1 72 26 0 2 17 1846104 1638332 0 3168 4080 1720 211960 1744 11977 155886 3 4 65 28 0 1 10 1846104 1640800 0 132 4488 556 126016 584 8016 106368 3 4 63 29 0 0 14 1846104 1639740 0 2248 3436 428 114188 452 7030 92418 3 3 59 35 0 1 6 1846096 1639504 0 1932 5500 436 141412 460 8261 112210 4 4 63 29 0 0 10 1846104 1640164 0 3052 4028 448 147684 472 7366 109554 4 4 61 30 0 0 10 1846100 1641040 0 2332 4952 632 147452 664 8767 118384 3 4 63 30 0 4 8 1846084 1641092 0 664 4948 276 152264 292 6448 98813 5 5 62 28 0 Furthermore, the output of top sorted by CPU time seems to support the theory that swap is what's bogging down the system: top - 09:05:32 up 37 days, 23:24, 1 user, load average: 9.75, 8.24, 7.12 Tasks: 173 total, 1 running, 172 sleeping, 0 stopped, 0 zombie Cpu(s): 1.6%us, 1.4%sy, 0.0%ni, 76.1%id, 20.6%wa, 0.1%hi, 0.2%si, 0.0%st Mem: 4044632k total, 2405628k used, 1639004k free, 0k buffers Swap: 7812492k total, 1851852k used, 5960640k free, 436k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 4174 root 17 0 63156 176 56 S 8 0.0 2138:52 35,38 bacula-fd 4185 root 17 0 63352 284 104 S 6 0.0 1709:25 28,29 bacula-sd 240 root 15 0 0 0 0 D 3 0.0 831:55.19 831:55 kswapd0 2852 root 10 -5 0 0 0 S 1 0.0 126:35.59 126:35 xfsbufd 2849 root 10 -5 0 0 0 S 0 0.0 119:50.94 119:50 xfsbufd 1364 root 10 -5 0 0 0 S 0 0.0 117:05.39 117:05 xfsbufd 21 root 10 -5 0 0 0 S 1 0.0 48:03.44 48:03 events/3 6940 postgres 16 0 43596 8 8 S 0 0.0 46:50.35 46:50 postmaster 1342 root 10 -5 0 0 0 S 0 0.0 23:14.34 23:14 xfsdatad/4 5415 root 17 0 1770m 108 48 S 0 0.0 15:03.74 15:03 bacula-dir 23 root 10 -5 0 0 0 S 0 0.0 13:09.71 13:09 events/5 5604 root 17 0 1216m 500 200 S 0 0.0 12:38.20 12:38 java 5552 root 16 0 1194m 580 248 S 0 0.0 11:58.00 11:58 java Here's the same sorted by virtual memory image size: top - 09:08:32 up 37 days, 23:27, 1 user, load average: 8.43, 8.26, 7.32 Tasks: 173 total, 1 running, 172 sleeping, 0 stopped, 0 zombie Cpu(s): 3.6%us, 3.4%sy, 0.0%ni, 62.2%id, 30.2%wa, 0.2%hi, 0.3%si, 0.0%st Mem: 4044632k total, 2404212k used, 1640420k free, 0k buffers Swap: 7812492k total, 1852548k used, 5959944k free, 100k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 5415 root 17 0 1770m 56 44 S 0 0.0 15:03.78 15:03 bacula-dir 5604 root 17 0 1216m 492 200 S 0 0.0 12:38.30 12:38 java 5552 root 16 0 1194m 476 200 S 0 0.0 11:58.20 11:58 java 4598 root 16 0 117m 44 44 S 0 0.0 0:13.37 0:13 eventmond 9614 gdm 16 0 93188 0 0 S 0 0.0 0:00.30 0:00 gdmgreeter 5527 root 17 0 78716 0 0 S 0 0.0 0:00.30 0:00 gdm 4185 root 17 0 63352 284 104 S 20 0.0 1709:52 28,29 bacula-sd 4174 root 17 0 63156 208 88 S 24 0.0 2139:25 35,39 bacula-fd 10849 postgres 18 0 54740 216 108 D 0 0.0 0:31.40 0:31 postmaster 6661 postgres 17 0 49432 0 0 S 0 0.0 0:03.50 0:03 postmaster 5507 root 15 0 47980 0 0 S 0 0.0 0:00.00 0:00 gdm 6940 postgres 16 0 43596 16 16 S 0 0.0 46:51.39 46:51 postmaster 5304 postgres 16 0 40580 132 88 S 0 0.0 6:21.79 6:21 postmaster 5301 postgres 17 0 40448 24 24 S 0 0.0 0:32.17 0:32 postmaster 11280 root 16 0 40288 28 28 S 0 0.0 0:00.11 0:00 sshd 5534 root 17 0 37580 0 0 S 0 0.0 0:56.18 0:56 X 30870 root 30 15 31668 28 28 S 0 0.0 1:13.38 1:13 snmpd 5305 postgres 17 0 30628 16 16 S 0 0.0 0:11.60 0:11 postmaster 27403 postfix 17 0 30248 0 0 S 0 0.0 0:02.76 0:02 qmgr 10815 postfix 15 0 30208 16 16 S 0 0.0 0:00.02 0:00 pickup 5306 postgres 16 0 29760 20 20 S 0 0.0 0:52.89 0:52 postmaster 5302 postgres 17 0 29628 64 32 S 0 0.0 1:00.64 1:00 postmaster I've tried tuning the swappiness kernel parameter to both high and low values, but nothing appears to change the behavior here. I'm at a loss to figure out what's going on. How can I find out what's causing this? Update: The system is a fully 64-bit system, so there should be no question of memory limitations due to 32-bit issues. Update2: As I mentioned in the original question, I've already tried tuning swappiness to all sorts of values, including 0. The result is always the same, with approximately 1.6 GB of memory remaining unused. Update3: Added top output to the above info.

  Read the article

• ubuntu 14.04LTS flickering

  - by user292609

  when I start the computer, makes a big high pitch sound and the only thing I can see on the screen is "[[23" written everywhere . I have to start it always through the recovery mode. Ubuntu desktop screen does not flick, but every window that can maximmize and minimize does it like crazy. Like firefox browser, terminal, vlc.. I have a Lap top Acer Aspire One with AMD/ATI graphic card. I read many forums about flickering screen and I try many things , but I still have the problem. I am very new in Ubuntu. Please help

  Read the article

• huwai 1731 ( mobile broadband ) not working with dell inspiron 3521

  - by N.Ramkumar

  Please help, one of my friend shared this note ( enclosed below), I used these codes and my laptop is able open the data card but I am not getting any signals. I am able to work with wired connection, but wi-fi and mobile broad band are not working. Please help. sudo apt-get purge usb-modeswitch sudo apt-get update sudo spt-get install usb-modeswitch sudo apt-get update gksudo gedit /lib/udev/rules.d/40-usb_modeswitch.rules Once you enter these above commands 40-usb_modeswitch.rules text file will open. Then, copy below mentioned lines into 40-usb_modeswitch.rules text file. #Huawei E1731 ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1446", RUN+="usb_modeswitch '%b/%k'" Save the file Then type : sudo apt-get update Then restart the machine.

  Read the article

• Can't install AMD drivers and Blinking problem

  - by demonscream

  I just installed Ubuntu 12.04 LTS with WUBI, everything is going fine and ubuntu is awesome but i have a little problem. When i open my Sony VAIO model E laptop, i have 2 choices (which is normal) but when i select Ubuntu 1/2 of the time it will just give a rapidly blinkin color background and can only be corrected if i reboot the computer and select ubuntu again. I think this has something to do with the fact i can't get any driver update for my computer from AMD, according to their website, VAIO computers aren't supported. I have a AMD RADEON HD 7650M graphic card which is not detected in ubuntu. When i try to install the drivers using the drivers application it gives a "can't install" error. What should i do?

  Read the article

• Cannot make NVIDIA driver work with Ubuntu 12.10

  - by user1293231

  I seem to have a problem similar to many but I didn't manage to get it solved: have a Lenovo N581 with an NVIDIA GeForce 610M have just installed a fresh Ubuntu 12.10 64 bits, + KDE and am trying to have my NVIDIA card work. Have tried all workarounds posted: purge nvidia, install kernel source/headers and then reinstall nvidia-current-updates (or just nvidia-current), do "sudo nvidia-xconfig". It does create a xorg.conf but does not much (no Module Section by the way). The result is that my system (jokey) tells me that the driver is there but not in use and I only get a 640x480 resolution. If I try to launch nvidia-settings it does indeed tell me that the nvidia driver is not used. I do all this under kde but I guess it does matter at this stage. Any hint of how to resolve this? I feel stuck and cannot use any of the acceleration which is partly why I got that laptop in the first place... thanks for any help/advise you may provide!

  Read the article

• Multi Monitor Setup Problems

  - by Shamballa

  I have Ubuntu 10.04 LTS - the Lucid Lynx. I have until recently been using a nVida Graphics card (NVIDIA GeForce 9800 GT) with two monitors attached, this all worked fine and dandy. A couple of days ago I bought two new identical LCD monitors for a multi monitor setup and two ATI graphics cards (ATI Sapphire Radeon HD5450). NOTE *All monitors work fine in Windows XP, 2k, Vista and 7 After I had booted into Ubuntu only one display came on, that I kind of expected anyway, then I removed the driver for the nVidia card and downloaded the ATI version which gave me the ATI Catalyst Control Center - in that only two of the displays were showing the third was disabled and showing unknown driver. I enabled the third monitor that stated "Unkown Driver" and had to reboot, upon reboot none of the displays work. I restarted and booted up into recovery mode and from now that is only what I can get into using a failsafe driver. It seems according to the log that a server is already active for Display 0 and I have to remove /tmp/.X0-lock and start again. This is what the log file is saying: Fatal Server Error Server is already active for display 0 if this server is no longer running, remove /tmp/.X0-lock and start again. (WW) xf86 closeconsole: KDSETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETSTATE failed: Bad file descriptor ddxSigGiveUp: closing log I have tried looking at my xorg.config file but unfortunately I have not really got a clue as to how it "should" be - I have tried regenerating it using this command from a terminal: sudo dpkg-reconfigure -phigh xserver-xorg but that had no effect so I am currently stuck in failsafe driver mode but two monitors are active but are mirroring each other. I hope that this is not to long - looking back I have been going on a bit! but I am just trying to explain as much as I can... I have asked this on Linuxquestions but nobody seems to know either or at least I have not had any responses. Could some kind soul please help explain what I can do from here? I would be eternally grateful. Chris * Update * Removing xorg.conf does nothing other than allowing me to use only two monitors - using the command: sudo aticonfig --initial generates the xorg.conf file below: but does not work either - I just get two monitors... Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I have tried using this command from a thread on the Ubuntu Forums with a question similar to mine: sudo aticonfig --initial=dual-head --adapter=all Generated xorg.conf file Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-1" Screen "aticonfig-Screen[1]-1" RightOf "aticonfig-Screen[1]-0" EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-1" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-1" Driver "fglrx" BusID "PCI:2:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]-1" Device "aticonfig-Device[0]-1" Monitor "aticonfig-Monitor[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-1" Device "aticonfig-Device[1]-1" Monitor "aticonfig-Monitor[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection This upon reboot renders ALL monitors blank and I have to go into recovery mode and use a failsafe driver. This is so much harder than I thought it would be, I don't think Ubuntu likes ATI for multi (3) monitors or maybe the other way around. Can anyone help still?

  Read the article

• Learning to program on punchcards

  - by Plutor

  I'd like to try programming with punch cards once in my life. How can I do this? I'm in my 30s, and grew up entirely in the PC era, programming on computers with screens and keyboards. I want to experience the way my father and grandfather used to work. I imagine the hardware (and probably the cards themselves) are no longer manufactured. Are there any universities or museums with functioning punch card readers anymore? I'm in Boston, but I'm willing to travel to do this. I asked MetaFilter, and I got some mixed answers (along with a lot of "no, don't do this" nay-saying). I did get a pointer to the Retro-Computing Society Of Rhode Island, but I haven't received a response to my email to them yet.

  Read the article

• Lenovo g510 webcam not detected

  - by user280433

  I have lenvo g510. Cheese and guvcview don't detect my webcam. Its my lsubs: Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub How to fix it?

  Read the article

• I need help pleas help me xorg.conf missing Ubuntu 11.10 can't install driver for my Intel GM965 on my Dell Latitude d630

  - by ??????? ?????????

  I have hard time solving my problem. I have searched the net but nothing worked... I just installed the newest ver of ubuntu 11.10 on my laptop dell latitude d630. Everything works fine but it seems i dont have my video card drivers installed. I have some standart drivers. I try to check out my xorg.conf file but its missing i try to make one from root but it gives me critical error. Its like i dont have X11 installed can some1 please help me here are some of the things ive tryed... """ splash@MDFC:/$ Xorg :1 -configure Fatal server error: Cannot open log file "/var/log/Xorg.1.log" Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log """ splash@MDFC:/$ sudo cp /root/xorg.conf.new /etc/X11/xorg.conf cp: cannot stat `/root/xorg.conf.new': No such file or directory """" Any ideas help me please...

  Read the article

• How can I fix the compiz effects lag in unity?

  - by Samir

  I've recently installed ubuntu 11.04, and I actually liked Unity (although many others prefer Gnome), but there seems to be a lag problem. Every time I press the super button to bring out the Dash, or Super+W to show all windows, or any other action that involves some sort of effect, the effect lags a bit, and it could get really annoying. I've seen a fix using CompizConfig Settings Manager, but that doesn't seem to work for me. I've got a NVidia 9800 GT 1 GB video card, a 2 GB Ram, and not sure about the CPU (if you need it, tell me and I'll figure it out). Any help would be appreciated Thanks in advance.

  Read the article

• How do I turn off nVidia high performance mode?

  - by gpen06

  I am new to Ubuntu 11.10 and never touched linux until today. I installed Ubuntu alongside with Windows 7. I have an issue with my laptop overheating and freezing when it uses the high performance GPU graphics mode (hybrid card). It is an easy fix for Windows 7. I simply set the graphics mode manually to the low performance integrated graphics (save power) mode using advanced power settings. In Ubuntu, I'm stumped at how to do this. When using Ubuntu, my laptop is showing the same symptoms as it did without the fix for Windows. I have the nVidia graphics driver installed for Windows which allows me to see which mode I am in. I downloaded it off of my laptop's website (ASUS). They do not offer driver downloads for linux. Screenshot of power settings in Windows 7

  Read the article

• kubuntu 12.04 runs slowly

  - by randy

  i have a 3ghz amd 64 dual core am3 socket processor, asus mom board, 4GB ram, 8800GTS nividia video card with 500MB ram. installed kubuntu 12.04 and very laggy. select menu and 20 seconds later the menu pops up. i switched to classic menu and that seemed to help. what direction should i look first to get this running better? video perhaps? i had ubuntu 11.04 on this machine previously and had no problems with speed.

  Read the article

• How do you ensure consistent experience across multiple graphics cards (or even driver versions)?

  - by Grigory Javadyan

  So I was writing a simple 2D game with OpenGL and SDL and had this problem when there was awful tearing when running in windowed mode (even though I explicitly asked SDL_SetVideoMode to use double buffering). Didn't worry about it all too much because most of the time the game grabs the entire screen, windowed mode is just for debugging. Anyway, yesterday I updated my nVidia drivers and tearing disappeared, the game runs smooth and looks nice in windowed mode too. I can see how the problem may be in the graphics driver, but this leads to a question. Obviously, professional game developers have to deal with a lot of different hardware/software configurations. What are the techniques they use to make sure the game looks the roughly the same on different graphics cards or even the same model of graphics card, but with different driver versions?

  Read the article

• Any chance for fully working X1600 PCI-E ID 71c3/Unity under Ubuntu 12.04?

  - by user74975

  How can I get Unity working under an ATI Radeon X1600 PCI-E on Ubuntu 12.04? I'm rather Windows guy, but I can do some things with CLI. ATI seems to have ended support for this card for both Windows and Linux. Theres no proper driver in jockey; binary driver from Software Center doesn't give Unity, just Unity 2D. Yes, I've tried the commands from this post - without any positive results; should I try installing drivers manually?

  Read the article

• No sound after updating from 11.10 to 12.04

  - by shaneo

  Hi I updated a friends computer from 11.10 to 12.04 and the sound stopped working in the built-in speakers. The computer is a Sony Vaio PCG-2J1L. I tried using the guide found here: https://help.ubuntu.com/community/HdaIntelSoundHowto and still no luck. $cat /proc/asound/card0/codec* | grep Codec Codec: Realtek ALC889 $cat /proc/asound/card0/pcm0c/info card: 0 device: 0 subdevice: 0 stream: CAPTURE id: ALC889 Analog name: ALC889 Analog subname: subdevice #0 class: 0 subclass: 0 subdevices_count: 1 subdevices_avail: 1 cat /proc/asound/card0/codec* output can be found here http://paste.ubuntu.com/1043188/ If anymore information is needed just let me know and ill post it here. Thank you in advance for any help with this issue.

  Read the article

• Ubuntu 11.10 problem with Nvidia

  - by dariush

  I have an acer with a Gforce graphics card. I installed ubuntu 11.10 and it was working properly until I installed Nvidia drivers via additional drivers, I hit "nvidia-xconfig" in terminal and then reboot. At startup lightdm fails to start. I changed /etc/X11/xorg.conf file back to default and reboot. It works properly, but with the default Ubuntu driver. I want to reconfigure Nvidia and use it. Can anyone tell me what should I do?

  Read the article

• Ubuntu 12.10 64b does not shutdown

  - by user108264

  I am a new linux user so i am not familiar with what actually is needed to check. When shutting down or trying to restart i get a screen with yellow letters and the system does not close or restart. I have to shut down manually. I can't type all the numbers but i will give the last ones. [90102.232650] [ end-trace 435966f5b367871 ] this seems to have happened after i downgraded the xorg so i can get drivers for my ATI card(4850HD). The suspend command works fine.

  Read the article

• No GUI before login on Ubuntu 14.04

  - by Pablo Chinchilla

  After I installed Ubuntu 14.04 as the only OS on my computer on nomodeset to install the Nvidia drivers for my video card. I installed it and all is working properly. The only problem that I have is that when I turn on my compurter I only see command lines instead of the Ubuntu logo. After that the login screen works in a proper way even with the GUI. I only want to get the Ubuntu logo instead of the command lines. PS: when I turn off my computer, the same thing is repeated.

  Read the article

• Xubuntu and other Debian based distros slow

  - by William V

  I have a Compaq Presario SR1950NX desktop computer with the AMD64 3800+ processor and 1GB ram and it seems that Ubunutu, Xubuntu and Lubuntu are all laggy. Things seem to be slow such as clicking on menus and opening programs and the UI renders in peices. When using the browser the system slows down considerably. I ran the TOP command and I do notice that xorg hits 30 to 40 percent cpu when running the browsers. I have tried these distros on a spare P4 machine and it is even worse. As long as I don't have a several things open at one time I can manage to get around although sluggishly. I also notice that I can't get debian based distros to install in 64bit (crtc6 failure) only in 32bit. Can anyone tell me what is it that I might be doing wrong? I have an integrated Nvidia card and have tried several of the recommended drivers which sometimes result in no boot screen upon reboot. Thanks

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162 163  | Next Page >