Search Results

Search found 4049 results on 162 pages for 'serial communication'.

Page 156/162 | < Previous Page | 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Hard Disk DRDY error: is it a crash

  - by pranjal

  I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

  Read the article

• 500 Internal Server Error with PHP application

  - by James

  I have written a PHP application using Windows and XAMPP. I've been trying to run it on Ubuntu 10.10 with Lighttpd 1.4.26. Parts of the application work fine, but whenever I try to log in, I get a 500 - Internal Server Error page. The only thing that shows up in /var/log/lighttpd/error.log is 2011-02-25 13:43:13: (mod_fastcgi.c.2582) unexpected end-of-file (perhaps the fastcgi process died): pid: 1169 socket: unix:/tmp/php.socket-0 2011-02-25 13:43:13: (mod_fastcgi.c.3367) response not received, request sent: 1596 on socket: unix:/tmp/php.socket-0 for /~denton/customer-facing-portal/index.php?, closing connection If I had any output whatsoever from PHP, this would be a lot easier to debug. Any ideas on how to get some? Here is my /etc/lighttpd/lighttpd.conf file: # Debian lighttpd configuration file # ############ Options you really have to take care of #################### ## modules to load server.modules = ( "mod_alias", "mod_compress", # "mod_rewrite", # "mod_redirect", # "mod_usertrack", # "mod_expire", # "mod_flv_streaming", # "mod_evasive", "mod_setenv" ) ## a static document-root, for virtual-hosting take look at the ## server.virtual-* options server.document-root = "/var/www/" ## where to upload files to, purged daily. server.upload-dirs = ( "/var/cache/lighttpd/uploads" ) ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" ## files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm", "index.lighttpd.html" ) ## Use the "Content-Type" extended attribute to obtain mime type if possible # mimetype.use-xattr = "enable" ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## Use ipv6 only if available. (disabled for while, check #560837) #include_shell "/usr/share/lighttpd/use-ipv6.pl" ## bind to port (default: 80) # server.port = 81 ## bind to localhost only (default: all interfaces) ## server.bind = "localhost" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts server.pid-file = "/var/run/lighttpd.pid" ## ## Format: <errorfile-prefix><status>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/var/www/" ## virtual directory listings dir-listing.encoding = "utf-8" server.dir-listing = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't change) server.username = "www-data" ## change gid to <gid> (default: don't change) server.groupname = "www-data" #### compress module compress.cache-dir = "/var/cache/lighttpd/compress/" compress.filetype = ("text/plain", "text/html", "application/x-javascript", "text/css") #### url handling modules (rewrite, redirect, access) # url.rewrite = ( "^/$" => "/server-status" ) # url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### expire module # expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes") #### external configuration files ## mimetype mapping include_shell "/usr/share/lighttpd/create-mime.assign.pl" ## load enabled configuration files, ## read /etc/lighttpd/conf-available/README first include_shell "/usr/share/lighttpd/include-conf-enabled.pl" ## Set environment variables setenv.add-environment = ( "DB_URL__DEMO" => "192.168.1.231", "DB_NAME_DEMO" => "demo", "DB_USER_DEMO" => "user", "DB_PASS_DEMO" => "password", "DB_AGENCY_DEMO" => "demo" ) Here is my /etc/php5/cgi/php.ini file (sans 1641 lines of comments): [PHP] register_long_arrays = Off short_open_tag = Off engine = On short_open_tag = Off asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT display_errors = On display_startup_errors = On log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = On html_errors = On variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off cgi.fix_pathinfo=1 file_uploads = On upload_max_filesize = 2M max_file_uploads = 20 allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] date.timezone = "America/Chicago" [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Pdo_mysql] pdo_mysql.cache_size = 2000 pdo_mysql.default_socket= [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [Interbase] ibase.allow_persistent = 1 ibase.max_persistent = -1 ibase.max_links = -1 ibase.timestampformat = "%Y-%m-%d %H:%M:%S" ibase.dateformat = "%Y-%m-%d" ibase.timeformat = "%H:%M:%S" [MySQL] mysql.allow_local_infile = On mysql.allow_persistent = On mysql.cache_size = 2000 mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_persistent = -1 mysqli.allow_persistent = On mysqli.max_links = -1 mysqli.cache_size = 2000 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [mysqlnd] mysqlnd.collect_statistics = On mysqlnd.collect_memory_statistics = Off [OCI8] [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 0 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 soap.wsdl_cache_limit = 5 [sysvshm] [ldap] ldap.max_links = -1 [mcrypt] [dba] Update: here is /etc/lighttpd/conf-enabled/15-fastcgi-php.conf As far as I know, it's just the default config file the Ubuntu package installed. ## FastCGI programs have the same functionality as CGI programs, ## but are considerably faster through lower interpreter startup ## time and socketed communication ## ## Documentation: /usr/share/doc/lighttpd-doc/fastcgi.txt.gz ## http://redmine.lighttpd.net/projects/lighttpd/wiki/Docs:ConfigurationOptions#mod_fastcgi-fastcgi ## Start an FastCGI server for php (needs the php5-cgi package) fastcgi.server += ( ".php" => (( "bin-path" => "/usr/bin/php-cgi", "socket" => "/tmp/php.socket", "max-procs" => 1, "idle-timeout" => 20, "bin-environment" => ( "PHP_FCGI_CHILDREN" => "4", "PHP_FCGI_MAX_REQUESTS" => "10000" ), "bin-copy-environment" => ( "PATH", "SHELL", "USER" ), "broken-scriptfilename" => "enable" )) )

  Read the article

• Sendmail to local domain ignoring MX records (part 2)

  - by FractalizeR

  Hello. I have the exact problem, like in this post: http://serverfault.com/questions/25068/sendmail-to-local-domain-ignoring-mx-records I am also using email provider like GMail For Your Domain (which stores your mail and manages it). I am sending mail from my server directly, but receiving mail is done via Yandex (email provider). Since the server hosts forum, I prefer to send mail directly from it because using another mail provider can slow things. Also, when I send 300.000 emails to my subscribers, email provider will surely block me thinking I send spam. My DNS zone now is: ; ; GSMFORUM.RU ; $TTL 1H gsmforum.ru. SOA ns1.hc.ru. support.hc.ru. ( 2009122268 ; Serial 1H ; Refresh 30M ; Retry 1W ; Expire 1H ) ; Minimum gsmforum.ru. NS ns1.hc.ru. gsmforum.ru. NS ns2.hc.ru. @ A 79.174.68.223 *.gsmforum.ru. CNAME @ ns1 A 79.174.68.223 ns2 A 79.174.68.224 @ MX 10 mx.yandex.ru. mail CNAME domain.mail.yandex.net. yamail-xxxxxxxxx CNAME mail.yandex.ru. Server hostname is server.gsmforum.ru. May be this is the cause? Can someone explain the reason of the matter (the rules that make sendmail consider domain to be local)? Can I easily change *.gsmforum.ru. CNAME @ into *.gsmforum.ru. A 79.174.68.224 to solve this problem? [root@server ~]# cat /etc/mail/local-host-names localhost localhost.localdomain This server hosts gsmforum.ru so I cannot put it into another domain like David Mackintosh suggests. Putting domain in mailertable doesn't solve the problem also. sendmail -bt still shows, that address is local. DontProbeInterfaces is also set to true at sendmail config. M4 file follows: divert(-1)dnl dnl # dnl # This is the sendmail macro config file for m4. If you make changes to dnl # /etc/mail/sendmail.mc, you will need to regenerate the dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is dnl # installed and then performing a dnl # dnl # make -C /etc/mail dnl # include(`/usr/share/sendmail-cf/m4/cf.m4')dnl VERSIONID(`setup for linux')dnl OSTYPE(`linux')dnl dnl # dnl # Do not advertize sendmail version. dnl # dnl define(`confSMTP_LOGIN_MSG', `$j Sendmail; $b')dnl dnl # dnl # default logging level is 9, you might want to set it higher to dnl # debug the configuration dnl # dnl define(`confLOG_LEVEL', `9')dnl dnl # dnl # Uncomment and edit the following line if your outgoing mail needs to dnl # be sent out through an external mail server: dnl # dnl define(`SMART_HOST', `smtp.your.provider')dnl dnl # define(`confDEF_USER_ID', ``8:12'')dnl dnl define(`confAUTO_REBUILD')dnl define(`confTO_CONNECT', `1m')dnl define(`confTRY_NULL_MX_LIST', `True')dnl define(`confDONT_PROBE_INTERFACES',`True') define(`PROCMAIL_MAILER_PATH', `/usr/bin/procmail')dnl define(`ALIAS_FILE', `/etc/aliases')dnl define(`STATUS_FILE', `/var/log/mail/statistics')dnl define(`UUCP_MAILER_MAX', `2000000')dnl define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl define(`confAUTH_OPTIONS', `A')dnl dnl # dnl # The following allows relaying if the user authenticates, and disallows dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links dnl # dnl define(`confAUTH_OPTIONS', `A p')dnl dnl # dnl # PLAIN is the preferred plaintext authentication method and used by dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do dnl # use LOGIN. Other mechanisms should be used if the connection is not dnl # guaranteed secure. dnl # Please remember that saslauthd needs to be running for AUTH. dnl # dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl # dnl # Rudimentary information on creating certificates for sendmail TLS: dnl # cd /usr/share/ssl/certs; make sendmail.pem dnl # Complete usage: dnl # make -C /usr/share/ssl/certs usage dnl # dnl define(`confCACERT_PATH', `/etc/pki/tls/certs')dnl dnl define(`confCACERT', `/etc/pki/tls/certs/ca-bundle.crt')dnl dnl define(`confSERVER_CERT', `/etc/pki/tls/certs/sendmail.pem')dnl dnl define(`confSERVER_KEY', `/etc/pki/tls/certs/sendmail.pem')dnl dnl # dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP's dnl # slapd, which requires the file to be readble by group ldap dnl # dnl define(`confDONT_BLAME_SENDMAIL', `groupreadablekeyfile')dnl dnl # dnl define(`confTO_QUEUEWARN', `4h')dnl dnl define(`confTO_QUEUERETURN', `5d')dnl dnl define(`confQUEUE_LA', `12')dnl dnl define(`confREFUSE_LA', `18')dnl define(`confTO_IDENT', `0')dnl dnl FEATURE(delay_checks)dnl FEATURE(`no_default_msa', `dnl')dnl FEATURE(`smrsh', `/usr/sbin/smrsh')dnl FEATURE(`mailertable', `hash -o /etc/mail/mailertable.db')dnl FEATURE(`virtusertable', `hash -o /etc/mail/virtusertable.db')dnl FEATURE(redirect)dnl FEATURE(always_add_domain)dnl FEATURE(use_cw_file)dnl FEATURE(use_ct_file)dnl dnl # dnl # The following limits the number of processes sendmail can fork to accept dnl # incoming messages or process its message queues to 20.) sendmail refuses dnl # to accept connections once it has reached its quota of child processes. dnl # dnl define(`confMAX_DAEMON_CHILDREN', `20')dnl dnl # dnl # Limits the number of new connections per second. This caps the overhead dnl # incurred due to forking new sendmail processes. May be useful against dnl # DoS attacks or barrages of spam. (As mentioned below, a per-IP address dnl # limit would be useful but is not available as an option at this writing.) dnl # dnl define(`confCONNECTION_RATE_THROTTLE', `3')dnl dnl # dnl # The -t option will retry delivery if e.g. the user runs over his quota. dnl # FEATURE(local_procmail, `', `procmail -t -Y -a $h -d $u')dnl FEATURE(`access_db', `hash -T<TMPF> -o /etc/mail/access.db')dnl FEATURE(`blacklist_recipients')dnl EXPOSED_USER(`root')dnl dnl # dnl # For using Cyrus-IMAPd as POP3/IMAP server through LMTP delivery uncomment dnl # the following 2 definitions and activate below in the MAILER section the dnl # cyrusv2 mailer. dnl # dnl define(`confLOCAL_MAILER', `cyrusv2')dnl dnl define(`CYRUSV2_MAILER_ARGS', `FILE /var/lib/imap/socket/lmtp')dnl dnl # dnl # The following causes sendmail to only listen on the IPv4 loopback address dnl # 127.0.0.1 and not on any other network devices. Remove the loopback dnl # address restriction to accept email from the internet or intranet. dnl # DAEMON_OPTIONS(`Name=MTA,Port=smtp') dnl # dnl # The following causes sendmail to additionally listen to port 587 for dnl # mail from MUAs that authenticate. Roaming users who can't reach their dnl # preferred sendmail daemon due to port 25 being blocked or redirected find dnl # this useful. dnl # dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl dnl # dnl # The following causes sendmail to additionally listen to port 465, but dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1. dnl # dnl # For this to work your OpenSSL certificates must be configured. dnl # dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl dnl # dnl # The following causes sendmail to additionally listen on the IPv6 loopback dnl # device. Remove the loopback address restriction listen to the network. dnl # dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl dnl # dnl # enable both ipv6 and ipv4 in sendmail: dnl # dnl DAEMON_OPTIONS(`Name=MTA-v4, Family=inet, Name=MTA-v6, Family=inet6') dnl # dnl # We strongly recommend not accepting unresolvable domains if you want to dnl # protect yourself from spam. However, the laptop and users on computers dnl # that do not have 24x7 DNS do need this. dnl # FEATURE(`accept_unresolvable_domains')dnl dnl # dnl FEATURE(`relay_based_on_MX')dnl dnl # dnl # Also accept email sent to "localhost.localdomain" as local email. dnl # LOCAL_DOMAIN(`localhost.localdomain')dnl dnl # dnl # The following example makes mail from this host and any additional dnl # specified domains appear to be sent from mydomain.com dnl # dnl MASQUERADE_AS(`mydomain.com')dnl dnl # dnl # masquerade not just the headers, but the envelope as well dnl # dnl FEATURE(masquerade_envelope)dnl dnl # dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well dnl # dnl FEATURE(masquerade_entire_domain)dnl dnl # dnl MASQUERADE_DOMAIN(localhost)dnl dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl dnl MASQUERADE_DOMAIN(mydomain.lan)dnl MAILER(smtp)dnl MAILER(procmail)dnl dnl MAILER(cyrusv2)dnl FEATURE(`dnsbl',`zen.spamhaus.org',`Rejected - your IP is blacklisted by http://www.spamhaus.org')

  Read the article

• Two network interfaces and two IP addresses on the same subnet in Linux

  - by Scott Duckworth

  I recently ran into a situation where I needed two IP addresses on the same subnet assigned to one Linux host so that we could run two SSL/TLS sites. My first approach was to use IP aliasing, e.g. using eth0:0, eth0:1, etc, but our network admins have some fairly strict settings in place for security that squashed this idea: They use DHCP snooping and normally don't allow static IP addresses. Static addressing is accomplished by using static DHCP entries, so the same MAC address always gets the same IP assignment. This feature can be disabled per switchport if you ask and you have a reason for it (thankfully I have a good relationship with the network guys and this isn't hard to do). With the DHCP snooping disabled on the switchport, they had to put in a rule on the switch that said MAC address X is allowed to have IP address Y. Unfortunately this had the side effect of also saying that MAC address X is ONLY allowed to have IP address Y. IP aliasing required that MAC address X was assigned two IP addresses, so this didn't work. There may have been a way around these issues on the switch configuration, but in an attempt to preserve good relations with the network admins I tried to find another way. Having two network interfaces seemed like the next logical step. Thankfully this Linux system is a virtual machine, so I was able to easily add a second network interface (without rebooting, I might add - pretty cool). A few keystrokes later I had two network interfaces up and running and both pulled IP addresses from DHCP. But then the problem came in: the network admins could see (on the switch) the ARP entry for both interfaces, but only the first network interface that I brought up would respond to pings or any sort of TCP or UDP traffic. After lots of digging and poking, here's what I came up with. It seems to work, but it also seems to be a lot of work for something that seems like it should be simple. Any alternate ideas out there? Step 1: Enable ARP filtering on all interfaces: # sysctl -w net.ipv4.conf.all.arp_filter=1 # echo "net.ipv4.conf.all.arp_filter = 1" >> /etc/sysctl.conf From the file networking/ip-sysctl.txt in the Linux kernel docs: arp_filter - BOOLEAN 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for each interface be answered based on whether or not the kernel would route a packet from the ARP'd IP out that interface (therefore you must use source based routing for this to work). In other words it allows control of which cards (usually 1) will respond to an arp request. 0 - (default) The kernel can respond to arp requests with addresses from other interfaces. This may seem wrong but it usually makes sense, because it increases the chance of successful communication. IP addresses are owned by the complete host on Linux, not by particular interfaces. Only for more complex setups like load- balancing, does this behaviour cause problems. arp_filter for the interface will be enabled if at least one of conf/{all,interface}/arp_filter is set to TRUE, it will be disabled otherwise Step 2: Implement source-based routing I basically just followed directions from http://lartc.org/howto/lartc.rpdb.multiple-links.html, although that page was written with a different goal in mind (dealing with two ISPs). Assume that the subnet is 10.0.0.0/24, the gateway is 10.0.0.1, the IP address for eth0 is 10.0.0.100, and the IP address for eth1 is 10.0.0.101. Define two new routing tables named eth0 and eth1 in /etc/iproute2/rt_tables: ... top of file omitted ... 1 eth0 2 eth1 Define the routes for these two tables: # ip route add default via 10.0.0.1 table eth0 # ip route add default via 10.0.0.1 table eth1 # ip route add 10.0.0.0/24 dev eth0 src 10.0.0.100 table eth0 # ip route add 10.0.0.0/24 dev eth1 src 10.0.0.101 table eth1 Define the rules for when to use the new routing tables: # ip rule add from 10.0.0.100 table eth0 # ip rule add from 10.0.0.101 table eth1 The main routing table was already taken care of by DHCP (and it's not even clear that its strictly necessary in this case), but it basically equates to this: # ip route add default via 10.0.0.1 dev eth0 # ip route add 130.127.48.0/23 dev eth0 src 10.0.0.100 # ip route add 130.127.48.0/23 dev eth1 src 10.0.0.101 And voila! Everything seems to work just fine. Sending pings to both IP addresses works fine. Sending pings from this system to other systems and forcing the ping to use a specific interface works fine (ping -I eth0 10.0.0.1, ping -I eth1 10.0.0.1). And most importantly, all TCP and UDP traffic to/from either IP address works as expected. So again, my question is: is there a better way to do this? This seems like a lot of work for a seemingly simple problem.

  Read the article

• Printing fails after first print with Centos 6 and HP LaserJet P3015dn printer

  - by Gavin Simpson

  Centos 6 recognises and configures a HP LaserJet P3015dn printer connected via USB. This machine is being configured as a small group file/print server. I can print a test page, which is processed/printed correctly. The next time printing is attempted (say printing a second test page), the page is not printed and the printer is set to disabled. The status of the printer is stated as: Stopped - /usr/lib/cups/backend/hp failed in the printer configuration dialogue. /var/log/cups/error_log contains this information (first two lines were there prior to the failed print job) E [24/Jun/2004:09:12:57 +0100] Returning HTTP Forbidden for Resume-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost E [24/Jun/2004:09:20:59 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost D [24/Jun/2004:09:37:28 +0100] [Job 28] The following messages were recorded from 09:36:43 AM to 09:37:28 AM D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding start banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding end banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] File of type application/vnd.cups-banner queued by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] hold_until=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Queued on "HP-LaserJet-P3010-Series" by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] job-sheets=none,none D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[0]="HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[1]="28" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[2]="gavin" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[3]="Test Page" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[4]="1" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[5]="job-uuid=urn:uuid:b3370a97-4ab6-3451-40a2-6239b13fa3e1 job-originating-host-name=localhost" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[6]="/var/spool/cups/d00028-001" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[1]="CUPS_DATADIR=/usr/share/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[2]="CUPS_DOCROOT=/usr/share/cups/www" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[6]="CUPS_SERVERROOT=/etc/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[7]="CUPS_STATEDIR=/var/run/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[8]="HOME=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[10]="[email protected]" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[11]="SOFTWARE=CUPS/1.4.2" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[12]="TMPDIR=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[13]="USER=root" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[15]="CUPS_ENCRYPTION=IfRequested" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[16]="IPP_PORT=631" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[17]="CHARSET=utf-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[18]="LANG=en_US.UTF-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[19]="PPD=/etc/cups/ppd/HP-LaserJet-P3010-Series.ppd" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[20]="RIP_MAX_CACHE=8m" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[21]="CONTENT_TYPE=application/vnd.cups-banner" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[22]="DEVICE_URI=hp:/usb/HP_LaserJet_P3010_Series?serial=VNBV993GM4" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[23]="PRINTER_INFO=Hewlett-Packard HP LaserJet P3010 Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[24]="PRINTER_LOCATION=electra.geog.ucl.ac.uk" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[25]="PRINTER=HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[26]="CUPS_FILETYPE=document" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript" D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/bannertops (PID 2858) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/pstops (PID 2859) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started backend /usr/lib/cups/backend/hp (PID 2860) D [24/Jun/2004:09:37:28 +0100] [Job 28] load_banner(filename="/var/spool/cups/d00028-001") D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_comments - %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%BoundingBox: 12 12 600 780 D [24/Jun/2004:09:37:28 +0100] [Job 28] %cupsRotation: 0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Creator: bannertops/CUPS v1.4.2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%CreationDate: Thu 24 Jun 2004 09:36:43 AM BST D [24/Jun/2004:09:37:28 +0100] [Job 28] %%LanguageLevel: 2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentData: Clean7Bit D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Title: (Test Page) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%For: (gavin) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Pages: 1 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentSuppliedResources: font Monospace D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Bold D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-BoldOblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Oblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%EndComments D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_prolog - %%BeginProlog D [24/Jun/2004:09:37:28 +0100] [Job 28] STATE: +connecting-to-device D [24/Jun/2004:09:37:28 +0100] [Job 28] prnt/backend/hp.c 762: ERROR: cannot open channel PRINT D [24/Jun/2004:09:37:28 +0100] [Job 28] Backend returned status 1 (failed) D [24/Jun/2004:09:37:28 +0100] [Job 28] Printer stopped due to backend errors; please consult the error_log file for details. D [24/Jun/2004:09:37:28 +0100] [Job 28] End of messages D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state=5(stopped) D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-message="/usr/lib/cups/backend/hp failed" D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-reasons=paused /var/log/messages contains the following reports associated with the recognition of the printer and the failed print job: Jun 24 09:35:07 electra kernel: usb 1-8: new high speed USB device using ehci_hcd and address 2 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device found, idVendor=03f0, idProduct=8d17 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 24 09:35:07 electra kernel: usb 1-8: Product: HP LaserJet P3010 Series Jun 24 09:35:07 electra kernel: usb 1-8: Manufacturer: Hewlett-Packard Jun 24 09:35:07 electra kernel: usb 1-8: SerialNumber: VNBV993GM4 Jun 24 09:35:07 electra kernel: usb 1-8: configuration #1 chosen from 1 choice Jun 24 09:35:07 electra kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x8D17 Jun 24 09:35:07 electra kernel: usbcore: registered new interface driver usblp Jun 24 09:35:07 electra udev-configure-printer: invalid or missing IEEE 1284 Device ID Jun 24 09:35:08 electra hp[1942]: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:09 electra python: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:51 electra kernel: usblp0: removed Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 254: unable to read Dot4ReverseReply data: Resource temporarily unavailable exp=2 act=0 Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 330: invalid DOT4InitReply: cmd=0, result=20#012, revision=0 Jun 24 09:37:28 electra hp[2860]: prnt/backend/hp.c 762: ERROR: cannot open channel PRINT I am now at a loss as to how to proceed to get this printer working on my Centos machine. How can I configure the machine to print more than a single print job without needing to be unplugged/plugged in repeatedly?

  Read the article

• LDAP over SSL with an EFI Fiery printer

  - by austinian

  I've got a printer with a Fiery running 8e Release 2. I can authenticate users against AD using the LDAP configuration, but I can only get it to work if I don't use SSL/TLS, and only if I use SIMPLE authentication. Right now, it's authenticating using a fairly low-impact user, but it's also the only system on our network that's not using LDAPS. I can get AD info fine over LDAPS using ldp.exe from my machine, our firewall, our mail filter, our linux boxes, etc. The only problem child is the Fiery. I've added the LDAP server certificate as a trusted cert to the Fiery, but after I check the box for Secure Communication and change the port to 636, pressing Validate results in a dialog box coming up saying: LDAP Validation Failed Server Name invalid or server is unavailable. I've tried changing the server name to use just the name, the FQDN, and the IP address, and changed it to another server, just to see if it was just this AD server that was fussy with the Fiery. EDIT: removed LDP output, added packet capture analysis from wireshark: The conversation seems pretty normal to me, up to the point where the Fiery terminates the connection after the server sends back a handshake response. Maybe they messed up their TLS implementation? I'm trying support, but it's been fairly useless so far. The cert is a SHA-2 (sha256RSA) 2048-bit certificate. Also, it looks like the Fiery is specifying TLS 1.0. Looking at http://msdn.microsoft.com/en-us/library/windows/desktop/aa374757(v=vs.85).aspx, I'm not seeing SHA256 and TLS 1.0 combination being supported by SChannel. headdesk perhaps that's why, after the DC changes the cipher spec, the connection is terminated by the Fiery? TLS 1.1 and 1.2 are enabled on the DC. Wireshark conversation: DC: 172.17.2.22, Fiery: 172.17.2.42 No. Time Source Source Port Destination Destination Port Protocol Length Info 1 0.000000000 172.17.2.42 48633 172.17.2.22 ldaps TCP 74 48633 > ldaps [SYN] Seq=0 Win=5840 Len=0 MSS=1460 SACK_PERM=1 TSval=3101761 TSecr=0 WS=4 2 0.000182000 Dell_5e:94:e3 Broadcast ARP 60 Who has 172.17.2.42? Tell 172.17.2.22 3 0.000369000 TyanComp_c9:0f:90 Dell_5e:94:e3 ARP 60 172.17.2.42 is at 00:e0:81:c9:0f:90 4 0.000370000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 74 ldaps > 48633 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 WS=256 SACK_PERM=1 TSval=67970573 TSecr=3101761 5 0.000548000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=1 Ack=1 Win=5840 Len=0 TSval=3101761 TSecr=67970573 6 0.001000000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 147 Client Hello 7 0.001326000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 8 0.001513000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 9 0.001515000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=1449 Win=8736 Len=0 TSval=3101761 TSecr=67970573 10 0.001516000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=2897 Win=11632 Len=0 TSval=3101761 TSecr=67970573 11 0.001732000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 12 0.001737000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 1243 Server Hello, Certificate, Certificate Request, Server Hello Done 13 0.001738000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=4345 Win=14528 Len=0 TSval=3101761 TSecr=67970573 14 0.001739000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=5522 Win=17424 Len=0 TSval=3101761 TSecr=67970573 15 0.002906000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 78 Certificate 16 0.004155000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 333 Client Key Exchange 17 0.004338000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=361 Win=66304 Len=0 TSval=67970573 TSecr=3101762 18 0.004338000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 72 Change Cipher Spec 19 0.005481000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 327 Encrypted Handshake Message 20 0.005645000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=628 Win=66048 Len=0 TSval=67970574 TSecr=3101762 21 0.010247000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 125 Change Cipher Spec, Encrypted Handshake Message 22 0.016451000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [FIN, ACK] Seq=628 Ack=5581 Win=17424 Len=0 TSval=3101765 TSecr=67970574 23 0.016630000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5581 Ack=629 Win=66048 Len=0 TSval=67970575 TSecr=3101765 24 0.016811000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 60 ldaps > 48633 [RST, ACK] Seq=5581 Ack=629 Win=0 Len=0

  Read the article

• Server 2003 SP2 BSOD caused by fltmgr.sys

  - by MasterMax1313

  I'm running into a problem where a Server 2003 SP2 box has started crashing roughly once an hour, BSODing out with the message that fltmgr.sys is probably the cause. I ran dumpchk.exe on the memory.dmp file, indicating the same thing. Any thoughts on typical root causes? The following is the error code I'm seeing: Error code 0000007e, parameter1 c0000005, parameter2 f723e087, parameter3 f78cea8c, parameter4 f78ce788. After running dumpchk on the memory.dmp file, I get the following note: Probably caused by : fltmgr.sys ( fltmgr!FltGetIrpName+63f ) The full log is here: Microsoft (R) Windows Debugger Version 6.12.0002.633 X86 Copyright (c) Microsoft Corporation. All rights reserved. Loading Dump File [c:\windows\memory.dmp] Kernel Complete Dump File: Full address space is available Symbol search path is: *** Invalid *** **************************************************************************** * Symbol loading may be unreliable without a symbol search path. * * Use .symfix to have the debugger choose a symbol path. * * After setting your symbol path, use .reload to refresh symbol locations. * **************************************************************************** Executable search path is: ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* *** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe - Windows Server 2003 Kernel Version 3790 (Service Pack 2) UP Free x86 compatible Product: Server, suite: TerminalServer SingleUserTS Built by: 3790.srv03_sp2_gdr.101019-0340 Machine Name: Kernel base = 0x80800000 PsLoadedModuleList = 0x8089ffa8 Debug session time: Wed Oct 5 08:48:04.803 2011 (UTC - 4:00) System Uptime: 0 days 14:25:12.085 ********************************************************************* * Symbols can not be loaded because symbol path is not initialized. * * * * The Symbol Path can be set by: * * using the _NT_SYMBOL_PATH environment variable. * * using the -y <symbol_path> argument when starting the debugger. * * using .sympath and .sympath+ * ********************************************************************* *** ERROR: Symbol file could not be found. Defaulted to export symbols for ntkrnlpa.exe - Loading Kernel Symbols ............................................................... ................................................. Loading User Symbols Loading unloaded module list ... ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 7E, {c0000005, f723e087, f78dea8c, f78de788} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. *** ERROR: Symbol file could not be found. Defaulted to export symbols for fltmgr.sys - --omitted-- Probably caused by : fltmgr.sys ( fltmgr!FltGetIrpName+63f ) Followup: MachineOwner --------- ----- 32 bit Kernel Full Dump Analysis DUMP_HEADER32: MajorVersion 0000000f MinorVersion 00000ece KdSecondaryVersion 00000000 DirectoryTableBase 004e7000 PfnDataBase 81600000 PsLoadedModuleList 8089ffa8 PsActiveProcessHead 808a61c8 MachineImageType 0000014c NumberProcessors 00000001 BugCheckCode 0000007e BugCheckParameter1 c0000005 BugCheckParameter2 f723e087 BugCheckParameter3 f78dea8c BugCheckParameter4 f78de788 PaeEnabled 00000001 KdDebuggerDataBlock 8088e3e0 SecondaryDataState 00000000 ProductType 00000003 SuiteMask 00000110 Physical Memory Description: Number of runs: 3 (limited to 3) FileOffset Start Address Length 00001000 0000000000001000 0009e000 0009f000 0000000000100000 bfdf0000 bfe8f000 00000000bff00000 00100000 Last Page: 00000000bff8e000 00000000bffff000 KiProcessorBlock at 8089f300 1 KiProcessorBlock entries: ffdff120 Windows Server 2003 Kernel Version 3790 (Service Pack 2) UP Free x86 compatible Product: Server, suite: TerminalServer SingleUserTS Built by: 3790.srv03_sp2_gdr.101019-0340 Machine Name:*** ERROR: Module load completed but symbols could not be loaded for srv.sys Kernel base = 0x80800000 PsLoadedModuleList = 0x8089ffa8 Debug session time: Wed Oct 5 08:48:04.803 2011 (UTC - 4:00) System Uptime: 0 days 14:25:12.085 start end module name 80800000 80a50000 nt Tue Oct 19 10:00:49 2010 (4CBDA491) 80a50000 80a6f000 hal Sat Feb 17 00:48:25 2007 (45D69729) b83d4000 b83fe000 Fastfat Sat Feb 17 01:27:55 2007 (45D6A06B) b8476000 b84a1000 RDPWD Sat Feb 17 00:44:38 2007 (45D69646) b8549000 b8554000 TDTCP Sat Feb 17 00:44:32 2007 (45D69640) b8fe1000 b9045000 srv Thu Feb 17 11:58:17 2011 (4D5D53A9) b956d000 b95be000 HTTP Fri Nov 06 07:51:22 2009 (4AF41BCA) b9816000 b982d780 hgfs Tue Aug 12 20:36:54 2008 (48A22CA6) b9b16000 b9b20000 ndisuio Sat Feb 17 00:58:25 2007 (45D69981) b9cf6000 b9d1ac60 iwfsd Wed Sep 29 01:43:59 2004 (415A4B9F) b9e5b000 b9e62000 parvdm Tue Mar 25 03:03:49 2003 (3E7FFF55) b9e63000 b9e67860 lgtosync Fri Sep 12 04:38:13 2003 (3F6185F5) b9ed3000 b9ee8000 Cdfs Sat Feb 17 01:27:08 2007 (45D6A03C) b9f10000 b9f2e000 EraserUtilRebootDrv Thu Jul 07 21:45:11 2011 (4E166127) b9f2e000 b9f8c000 eeCtrl Thu Jul 07 21:45:11 2011 (4E166127) b9f8c000 b9f9d000 Fips Sat Feb 17 01:26:33 2007 (45D6A019) b9f9d000 ba013000 mrxsmb Fri Feb 18 10:22:23 2011 (4D5E8EAF) ba013000 ba043000 rdbss Wed Feb 24 10:54:03 2010 (4B854B9B) ba043000 ba0ad000 SPBBCDrv Mon Dec 14 23:39:00 2009 (4B2712E4) ba0ad000 ba0d7000 afd Thu Feb 10 08:42:18 2011 (4D53EB3A) ba0d7000 ba108000 netbt Sat Feb 17 01:28:57 2007 (45D6A0A9) ba108000 ba19c000 tcpip Sat Aug 15 05:53:38 2009 (4A8685A2) ba19c000 ba1b5000 ipsec Sat Feb 17 01:29:28 2007 (45D6A0C8) ba275000 ba288600 NAVENG Fri Jul 29 08:10:02 2011 (4E32A31A) ba289000 ba2ae000 SYMEVENT Thu Apr 15 21:31:23 2010 (4BC7BDEB) ba2ae000 ba42d300 NAVEX15 Fri Jul 29 08:07:28 2011 (4E32A280) ba42e000 ba479000 SRTSP Fri Mar 04 15:31:08 2011 (4D714C0C) ba485000 ba487b00 dump_vmscsi Wed Apr 11 13:55:32 2007 (461D2114) ba4e1000 ba540000 update Mon May 28 08:15:16 2007 (465AC7D4) ba568000 ba59f000 rdpdr Sat Feb 17 00:51:00 2007 (45D697C4) ba59f000 ba5b1000 raspptp Sat Feb 17 01:29:20 2007 (45D6A0C0) ba5b1000 ba5ca000 ndiswan Sat Feb 17 01:29:22 2007 (45D6A0C2) ba5da000 ba5e4000 dump_diskdump Sat Feb 17 01:07:44 2007 (45D69BB0) ba66a000 ba67e000 rasl2tp Sat Feb 17 01:29:02 2007 (45D6A0AE) ba67e000 ba69a000 VIDEOPRT Sat Feb 17 01:10:30 2007 (45D69C56) ba69a000 ba6c1000 ks Sat Feb 17 01:30:40 2007 (45D6A110) ba6c1000 ba6d5000 redbook Sat Feb 17 01:07:26 2007 (45D69B9E) ba6d5000 ba6ea000 cdrom Sat Feb 17 01:07:48 2007 (45D69BB4) ba6ea000 ba6ff000 serial Sat Feb 17 01:06:46 2007 (45D69B76) ba6ff000 ba717000 parport Sat Feb 17 01:06:42 2007 (45D69B72) ba717000 ba72a000 i8042prt Sat Feb 17 01:30:40 2007 (45D6A110) baff0000 baff3700 CmBatt Sat Feb 17 00:58:51 2007 (45D6999B) bf800000 bf9d3000 win32k Thu Mar 03 08:55:02 2011 (4D6F9DB6) bf9d3000 bf9ea000 dxg Sat Feb 17 01:14:39 2007 (45D69D4F) bf9ea000 bf9fec80 vmx_fb Sat Aug 16 07:23:10 2008 (48A6B89E) bf9ff000 bfa4a000 ATMFD Tue Feb 15 08:19:22 2011 (4D5A7D5A) bff60000 bff7e000 RDPDD Sat Feb 17 09:01:19 2007 (45D70AAF) f7214000 f723a000 KSecDD Mon Jun 15 13:45:11 2009 (4A3688A7) f723a000 f725f000 fltmgr Sat Feb 17 00:51:08 2007 (45D697CC) f725f000 f7272000 CLASSPNP Sat Feb 17 01:28:16 2007 (45D6A080) f7272000 f7283000 symmpi Mon Dec 13 16:03:14 2004 (41BE0392) f7283000 f72a2000 SCSIPORT Sat Feb 17 01:28:41 2007 (45D6A099) f72a2000 f72bf000 atapi Sat Feb 17 01:07:34 2007 (45D69BA6) f72bf000 f72e9000 volsnap Sat Feb 17 01:08:23 2007 (45D69BD7) f72e9000 f7315000 dmio Sat Feb 17 01:10:44 2007 (45D69C64) f7315000 f733c000 ftdisk Sat Feb 17 01:08:05 2007 (45D69BC5) f733c000 f7352000 pci Sat Feb 17 00:59:03 2007 (45D699A7) f7352000 f7386000 ACPI Sat Feb 17 00:58:47 2007 (45D69997) f7487000 f7490000 WMILIB Tue Mar 25 03:13:00 2003 (3E80017C) f7497000 f74a6000 isapnp Sat Feb 17 00:58:57 2007 (45D699A1) f74a7000 f74b4000 PCIIDEX Sat Feb 17 01:07:32 2007 (45D69BA4) f74b7000 f74c7000 MountMgr Sat Feb 17 01:05:35 2007 (45D69B2F) f74c7000 f74d2000 PartMgr Sat Feb 17 01:29:25 2007 (45D6A0C5) f74d7000 f74e7000 disk Sat Feb 17 01:07:51 2007 (45D69BB7) f74e7000 f74f3000 Dfs Sat Feb 17 00:51:17 2007 (45D697D5) f74f7000 f7501000 crcdisk Sat Feb 17 01:09:50 2007 (45D69C2E) f7507000 f7517000 agp440 Sat Feb 17 00:58:53 2007 (45D6999D) f7517000 f7522000 TDI Sat Feb 17 01:01:19 2007 (45D69A2F) f7527000 f7532000 ptilink Sat Feb 17 01:06:38 2007 (45D69B6E) f7537000 f7540000 raspti Sat Feb 17 00:59:23 2007 (45D699BB) f7547000 f7556000 termdd Sat Feb 17 00:44:32 2007 (45D69640) f7557000 f7561000 Dxapi Tue Mar 25 03:06:01 2003 (3E7FFFD9) f7577000 f7580000 mssmbios Sat Feb 17 00:59:12 2007 (45D699B0) f7587000 f7595000 NDProxy Wed Nov 03 09:25:59 2010 (4CD162E7) f75a7000 f75b1000 flpydisk Tue Mar 25 03:04:32 2003 (3E7FFF80) f75b7000 f75c0080 SRTSPX Fri Mar 04 15:31:24 2011 (4D714C1C) f75d7000 f75e3000 vga Sat Feb 17 01:10:30 2007 (45D69C56) f75e7000 f75f2000 Msfs Sat Feb 17 00:50:33 2007 (45D697A9) f75f7000 f7604000 Npfs Sat Feb 17 00:50:36 2007 (45D697AC) f7607000 f7615000 msgpc Sat Feb 17 00:58:37 2007 (45D6998D) f7617000 f7624000 netbios Sat Feb 17 00:58:29 2007 (45D69985) f7627000 f7634000 wanarp Sat Feb 17 00:59:17 2007 (45D699B5) f7637000 f7646000 intelppm Sat Feb 17 00:48:30 2007 (45D6972E) f7647000 f7652000 kbdclass Sat Feb 17 01:05:39 2007 (45D69B33) f7657000 f7661000 mouclass Tue Mar 25 03:03:09 2003 (3E7FFF2D) f7667000 f7671000 serenum Sat Feb 17 01:06:44 2007 (45D69B74) f7677000 f7682000 fdc Sat Feb 17 01:07:16 2007 (45D69B94) f7687000 f7694b00 vmx_svga Sat Aug 16 07:22:07 2008 (48A6B85F) f7697000 f76a0000 watchdog Sat Feb 17 01:11:45 2007 (45D69CA1) f76a7000 f76b0000 ndistapi Sat Feb 17 00:59:19 2007 (45D699B7) f76b7000 f76c6000 raspppoe Sat Feb 17 00:59:23 2007 (45D699BB) f76c8000 f7707000 NDIS Sat Feb 17 01:28:49 2007 (45D6A0A1) f7707000 f770f000 kdcom Tue Mar 25 03:08:00 2003 (3E800050) f770f000 f7717000 BOOTVID Tue Mar 25 03:07:58 2003 (3E80004E) f7717000 f771e000 intelide Sat Feb 17 01:07:32 2007 (45D69BA4) f771f000 f7726000 dmload Tue Mar 25 03:08:08 2003 (3E800058) f777f000 f7786000 dxgthk Tue Mar 25 03:05:52 2003 (3E7FFFD0) f7787000 f778e000 vmmemctl Tue Aug 12 20:37:25 2008 (48A22CC5) f77cf000 f77d6280 vmxnet Mon Sep 08 21:17:10 2008 (48C5CE96) f77d7000 f77df000 audstub Tue Mar 25 03:09:12 2003 (3E800098) f77ef000 f77f7000 Fs_Rec Tue Mar 25 03:08:36 2003 (3E800074) f77f7000 f77fe000 Null Tue Mar 25 03:03:05 2003 (3E7FFF29) f77ff000 f7806000 Beep Tue Mar 25 03:03:04 2003 (3E7FFF28) f7807000 f780f000 mnmdd Tue Mar 25 03:07:53 2003 (3E800049) f780f000 f7817000 RDPCDD Tue Mar 25 03:03:05 2003 (3E7FFF29) f7817000 f781f000 rasacd Tue Mar 25 03:11:50 2003 (3E800136) f7878000 f7897000 Mup Tue Apr 12 15:05:46 2011 (4DA4A28A) f7897000 f7899980 compbatt Sat Feb 17 00:58:51 2007 (45D6999B) f789b000 f789e900 BATTC Sat Feb 17 00:58:46 2007 (45D69996) f789f000 f78a1b00 vmscsi Wed Apr 11 13:55:32 2007 (461D2114) f79af000 f79b0280 vmmouse Mon Aug 11 07:16:51 2008 (48A01FA3) f79b1000 f79b2280 swenum Sat Feb 17 01:05:56 2007 (45D69B44) f7b4a000 f7bdf000 Ntfs Sat Feb 17 01:27:23 2007 (45D6A04B) Unloaded modules: ba65a000 ba668000 imapi.sys Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 0000E000 ba1c4000 ba1d5000 vpc-8042.sys Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00011000 f77df000 f77e7000 Sfloppy.SYS Timestamp: unavailable (00000000) Checksum: 00000000 ImageSize: 00008000 ******************************************************************************* * * * Bugcheck Analysis * * * ******************************************************************************* Use !analyze -v to get detailed debugging information. BugCheck 7E, {c0000005, f723e087, f78dea8c, f78de788} ***** Kernel symbols are WRONG. Please fix symbols to do analysis. --omitted-- Probably caused by : fltmgr.sys ( fltmgr!FltGetIrpName+63f ) Followup: MachineOwner --------- Finished dump check

  Read the article

• Trying to configure HWIC-3G-HSPA

  - by user1174838

  I'm trying to configure a couple of Cisco 1941 routes. The are both identical routers. Each as a HWIC-1T (Smart Serial interface) and a HWIC-3G-HSPA 3G interface. These routers are to be sent to remote sites. We have connectivity to one of the sites but if remote site A gors down we lose connectivity to remote site B. The HWIC-1T is the primary WAN interface using frame relay joining the two remote sites We want the HWIC-3G-HSPA to be usable for direct connectivity from head office to remote site B, and also the HWIC-3G-HSPA is do be used for comms between the remote sites when the frame relay is down (happens quite a bit). I initialy tried to do dynamic routing using EIGRP however in my lab setup of laptop - 1941 - 1941 - laptop, I was unable to get end to end connectivity. I later settled on static routing and have got end to end connectivity but only over frame relay, not the HWIC-3G-HSPA. The sanitized running config for remote site A: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteA ! boot-start-marker boot-end-marker ! ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" ! username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.2.5 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.2 255.255.255.252 encapsulation frame-relay cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.3.0 255.255.255.0 10.1.1.1 permanent ip route 192.168.3.0 255.255.255.0 Cellular0/1/0 210 permanent ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login local transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The sanitized running config for remote site B: version 15.1 service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption service udp-small-servers service tcp-small-servers ! hostname remoteB ! boot-start-marker boot-end-marker ! logging buffered 51200 warnings enable secret 5 censored ! no aaa new-model clock timezone wst 8 0 ! no ipv6 cef ip source-route ip cef ! no ip domain lookup ip domain name yourdomain.com multilink bundle-name authenticated ! chat-script gsm "" "ATDT*98*1#" TIMEOUT 30 "CONNECT" username admin privilege 15 secret 5 censored ! controller Cellular 0/1 ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.3.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial0/0/0 ip address 10.1.1.1 255.255.255.252 encapsulation frame-relay clock rate 2000000 cdp enable frame-relay interface-dlci 16 frame-relay lmi-type ansi frame-relay intf-type dce ! interface Cellular0/1/0 ip address negotiated encapsulation ppp dialer in-band dialer idle-timeout 2147483 dialer string gsm dialer-group 1 async mode interactive ppp chap hostname censored ppp chap password 7 censored ppp ipcp dns request cdp enable ! interface Cellular0/1/1 no ip address encapsulation ppp ! interface Dialer0 no ip address ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip route 0.0.0.0 0.0.0.0 Serial0/0/0 210 permanent ip route 0.0.0.0 0.0.0.0 Cellular0/1/0 220 permanent ip route 172.31.2.0 255.255.255.0 Cellular0/1/0 permanent ip route 192.168.2.0 255.255.255.0 10.1.1.2 permanent ip route 192.168.2.0 255.255.255.0 Cellular0/1/0 210 permanent ! kron occurrence PING in 1 recurring policy-list ICMP ! access-list 1 permit any dialer-list 1 protocol ip list 1 ! control-plane ! line con 0 logging synchronous login local line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line 0/1/0 exec-timeout 0 0 script dialer gsm login modem InOut no exec transport input all rxspeed 7200000 txspeed 5760000 line 0/1/1 no exec rxspeed 7200000 txspeed 5760000 line vty 0 4 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 5 15 access-class 23 in privilege level 15 password 7 censored login transport input all line vty 16 1370 password 7 censored login transport input all ! scheduler allocate 20000 1000 end The last problem I'm having is the 3G interfaces go down after only a few minutes of inactivity. I've tried using kron to ping the local HWIC-3G-HSPA interface (cellular 0/1/0) every minute but that hasn't been successful. Manually pinging the IP assigned (by the telco) to ce0/1/0 does bring the interface up. Any ideas? Thanks

  Read the article

• DNS resolution problems; dig SERVFAIL error

  - by JustinP

  I'm setting up a couple of dedicated servers, and having problems setting up my nameservers properly. One of these is a LEMP server (LAMP with nginx in place of Apache), and the other will function solely as an email server, running exim/dovecot/ASSP antispam (no Apache). The LEMP server is CentOS 5.5, with no control panel, while the email server is CentOS 5.5 as well, with cPanel/WHM. So, I've had problems getting DNS set up properly. I have two domains, each one pointing to one of these servers. The nameservers are registered correctly with the domain registrar, and the nameserver IPs are entered correctly as well. I've spoken to tech support at the registrar and they confirm that everything is set up on their end. Not knowing much about DNS, I googled nameservers and DNS until I nearly went blind, and spent hours messing with the configuration. Eventually, I got the LEMP server's DNS working properly (no cPanel). Pleased with this triumph, I'm trying to mimic that configuration and repeat the process with the email server, and it's just not happening. The nameserver starts and stops, but the domain doesn't resolve. Things I have tried Going through standard procedures to set up DNS in WHM Clearing all DNS information, uninstalling BIND, then reinstalling all of that and again going through WHM procedures for setting up DNS Clearing all DNS information, and setting up BIND via shell (completely outside of cPanel) by using my config and zone files from the LEMP server as a template named runs just fine, but nothing is resolving. When I "dig any example.com" I get a SERVFAIL message. Nslookups return no information. Here are my config and zone files. named.conf controls { inet 127.0.0.1 allow { localhost; } keys { coretext-key; }; }; options { listen-on port 53 { any; }; listen-on-v6 port 53 { ::1; }; directory "/var/named"; dump-file "/var/named/data/cache_dump.db"; statistics-file "/var/named/data/named_stats.txt"; memstatistics-file "/var/named/data/named_mem_stats.txt"; // Those options should be used carefully because they disable port // randomization // query-source port 53; // query-source-v6 port 53; allow-query { any; }; allow-query-cache { any; }; }; logging { channel default_debug { file "data/named.run"; severity dynamic; }; }; view "localhost_resolver" { match-clients { 127.0.0.0/24; }; match-destinations { localhost; }; recursion yes; //zone "." IN { // type hint; // file "/var/named/named.ca"; //}; include "/etc/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; match-destinations { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; // include "/var/named/named.rfc1912.zones"; // you should not serve your rfc1912 names to non-localhost clients. // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above : zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not on your directly attached LAN interface subnets: */ match-clients { any; }; match-destinations { any; }; recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers allow-query-cache { none; }; // Disable lookups for any cached data and root hints // all views must contain the root hints zone: //include "/etc/named.rfc1912.zones"; zone "." IN { type hint; file "/var/named/named.ca"; }; zone "example.com" { type master; file "data/db.example.com"; }; zone "3.2.1.in-addr.arpa" { type master; file "data/db.1.2.3"; }; }; include "/etc/rndc.key"; db.example.com $TTL 1D ; ; Zone file for example.com ; ; Mandatory minimum for a working domain ; @ IN SOA ns1.example.com. contact.example.com. ( 2011042905 ; serial 8H ; refresh 2H ; retry 4W ; expire 1D ; default_ttl ) NS ns1.example.com. NS ns2.example.com. ns1 A 1.2.3.4 ns2 A 1.2.3.5 example.com. A 1.2.3.4 localhost A 127.0.0.1 www CNAME example.com. mail CNAME example.com. ; db.1.2.3 $TTL 1D $ORIGIN 3.2.1.in-addr.arpa. @ IN SOA ns1.example.com contact.example.com. ( 2011042908 ; 8H ; 2H ; 4W ; 1D ; ) NS ns1.example.com. NS ns2.example.com. 4 PTR hostname.example.com. 5 PTR hostname.example.com. ; Also of note: both of these servers are managed. Tech support is very responsive, and largely useless. Hours go by with them asking me questions to narrow down what could be wrong, then they pass the ticket to the tech on the next shift, who ignores everything that's happened already and spend his whole shift asking all the same questions the last guy asked. So, in summary: *Nameservers, with IPs, are correctly registered with domain registrar *named is configured and running *...and must not be configured correctly, because nothing resolves. Any help would be great. I changed domains and IPs in the files to generics, but let me know if you need to know the domain in question. Thanks! UPDATE I found that I didn't have 127.0.0.1 in /etc/resolv.conf, so I added it, along with my two public IPs that I have named listening on. resolv.conf search www.example.com example.com nameserver 127.0.0.1 nameserver 7.8.9.10 ;Was in here by default, authoritative nameserver of hosting company nameserver 1.2.3.4 ;Public IP #1 nameserver 1.2.3.5 ;Public IP #2 Now when I DIG example.com from the host, it resolves. If I try to DIG from my other server (in the same datacenter), or from the internet, it times out or I get SERVFAIL.

  Read the article

• W3WP crashes when initializing a collection

  - by asbjornu

  I've created an ASP.NET MVC application that has an initializer attached to the PreApplicationStartMethodAttribute. When initializing, a collection is instantiated that implements an interface I've defined. When I instantiate this collection, w3wp.exe crashes with the following two incomprehensible entries in the event log: Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb Faulting module name: clr.dll, version: 4.0.30319.1, time stamp: 0x4ba21eeb Exception code: 0xc00000fd Fault offset: 0x0000000000001177 Faulting process id: 0x1348 Faulting application start time: 0x01cb0224882f4723 Faulting application path: c:\windows\system32\inetsrv\w3wp.exe Faulting module path: C:\Windows\Microsoft.NET\Framework64\v4.0.30319\clr.dll Report Id: c6a0941e-6e17-11df-864d-000acd16dcdb And: Fault bucket , type 0 Event Name: APPCRASH Response: Not available Cab Id: 0 Problem signature: P1: w3wp.exe P2: 7.5.7600.16385 P3: 4a5bd0eb P4: clr.dll P5: 4.0.30319.1 P6: 4ba21eeb P7: c00000fd P8: 0000000000001177 P9: P10: Attached files: These files may be available here: Analysis symbol: Rechecking for solution: 0 Report Id: c6a0941e-6e17-11df-864d-000acd16dcdb Report Status: 0 If I remove the instantiation of the collection, the application starts normally. If I leave the instantiation, w3wp crashes. If I modify the interface, w3wp still crashes. I've tried every variation I could come up with on the theme of keeping the instantiation but doing everything else differently, but w3wp still crashes. My biggest issue here is that I have absolutely no idea why w3wp is crashing. It's not a StackOverflowException or anything concrete like that, all I get is the unintelligent junk cited above. I've tried to use DebugDiag and IISState to debug the w3wp process, but DebugDiag is only available for post-dump analysis in x64 (I'm running on Windows 7 x64, so the w3wp process is thus 64 bit) and IISStat says the following when I try to run it: D:\Programs\iisstate>IISState.exe -p 9204 -d Symbol search path is: SRV*D:\Programs\iisstate\symbols*http://msdl.microsoft.com/download/symbols IISState is limited to processes associated with IIS. If you require a generic debugger, please use WinDBG or CDB. They are available for download from http://www.microsoft.com/ddk/debugging. This error may also occur if a debugger is already attached to the process being checked. Incorrect Process Attachment I've double-checked 10 times that the process ID of my w3wp process is correct. I'm suspecting that IISState too only can debug x86 processes. Setting a breakpoint anywhere in the application does absolutely nothing. The break point isn't hit and w3wp crashes as soon as the request comes through to IIS from the browser. Starting the application with F5 in Visual Studio 2010 or starting another application to get the w3wp process up and running and then attaching the VS2010 debugger to it and then visiting the faulting application doesn't help. I've also tried to add an HTTP module as described in KB-911816 as well as add this to my web.config file: <configuration> <runtime> <legacyUnhandledExceptionPolicy enabled="true" /> </runtime> </configuration> Needless to say, it makes absolutely no difference. So I'm left with no way to debug the w3wp process, no way to extract any information from it and complete garbage dumped in my event log. If anybody has any idea on how to debug this problem, please let me know! Update My collection was initialized based on RouteTable.Routes which might have thrown an exception (perhaps by not being initialized itself yet in such an early stage of the ASP.NET lifecycle). Postponing the communication with RouteTable.Routes until a later stage solved the problem. While I don't really need an answer to this question anymore, I still find it so obscure that I'll leave it for anyone to comment on and answer, because I found no existing posts on this problem anywhere, so it might be of good reference in the future.

  Read the article

• NHibernate which cache to use for WinForms application

  - by chiccodoro

  I have a C# WinForms application with a database backend (oracle) and use NHibernate for O/R mapping. I would like to reduce communication to the database as much as possible since the network in here is quite slow, so I read about second level caching. I found this quite good introduction, which lists the following available cache implementations. I'm wondering which implementation I should use for my application. The caching should be simple, it should not significantly slow down the first occurrence of a query, and it should not take much memory to load the implementing assemblies. (With NHibernate and Castle, the application already takes up to 80 MB of RAM!) Velocity: uses Microsoft Velocity which is a highly scalable in-memory application cache for all kinds of data. Prevalence: uses Bamboo.Prevalence as the cache provider. Bamboo.Prevalence is a .NET implementation of the object prevalence concept brought to life by Klaus Wuestefeld in Prevayler. Bamboo.Prevalence provides transparent object persistence to deterministic systems targeting the CLR. It offers persistent caching for smart client applications. SysCache: Uses System.Web.Caching.Cache as the cache provider. This means that you can rely on ASP.NET caching feature to understand how it works. SysCache2: Similar to NHibernate.Caches.SysCache, uses ASP.NET cache. This provider also supports SQL dependency-based expiration, meaning that it is possible to configure certain cache regions to automatically expire when the relevant data in the database changes. MemCache: uses memcached; memcached is a high-performance, distributed memory object caching system, generic in nature, but intended for use in speeding up dynamic web applications by alleviating database load. Basically a distributed hash table. SharedCache: high-performance, distributed and replicated memory object caching system. See here and here for more info My considerations so far were: Velocity seems quite heavyweight and overkill (the files totally take 467 KB of disk space, haven't measured the RAM it takes so far because I didn't manage to make it run, see below) Prevalence, at least in my first attempt, slowed down my query from ~0.5 secs to ~5 secs, and caching didn't work (see below) SysCache seems to be for ASP.NET, not for winforms. MemCache and SharedCache seem to be for distributed scenarios. Which one would you suggest me to use? There would also be a built-in implementation, which of course is very lightweight, but the referenced article tells me that I "(...) should never use this cache provider for production code but only for testing." Besides the question which fits best into my situation I also faced problems with applying them: Velocity complained that "dcacheClient" tag not specified in the application configuration file. Specify valid tag in configuration file," although I created an app.config file for the assembly and pasted the example from this article. Prevalence, as mentioned above, heavily slowed down my first query, and the next time the exact same query was executed, another select was sent to the database. Maybe I should "externalize" this topic into another post. I will do that if someone tells me it is absolutely unusual that a query is slowed down so much and he needs further details to help me.

  Read the article

• How to send mail from ASP.NET with IIS6 SMTP in a dedicated server?

  - by Julio César

  Hi. I'm trying to configure a dedicated server that runs ASP.NET to send mail through the local IIS SMTP server but mail is getting stuck in the Queue folder and doesn't get delivered. I'm using this code in an .aspx page to test: <%@ Page Language="C#" AutoEventWireup="true" %> <% new System.Net.Mail.SmtpClient("localhost").Send("[email protected]", "[email protected]", "testing...", "Hello, world.com"); %> Then, I added the following to the Web.config file: <system.net> <mailSettings> <smtp> <network host="localhost"/> </smtp> </mailSettings> </system.net> In the IIS Manager I've changed the following in the properties of the "Default SMTP Virtual Server". General: [X] Enable Logging Access / Authentication: [X] Windows Integrated Authentication Access / Relay Restrictions: (o) Only the list below, Granted 127.0.0.1 Delivery / Advanced: Fully qualified domain name = thedomain.com Finally, I run the SMTPDiag.exe tool like this: C:\>smtpdiag.exe [email protected] [email protected] Searching for Exchange external DNS settings. Computer name is THEDOMAIN. Failed to connect to the domain controller. Error: 8007054b Checking SOA for gmail.com. Checking external DNS servers. Checking internal DNS servers. SOA serial number match: Passed. Checking local domain records. Checking MX records using TCP: thedomain.com. Checking MX records using UDP: thedomain.com. Both TCP and UDP queries succeeded. Local DNS test passed. Checking remote domain records. Checking MX records using TCP: gmail.com. Checking MX records using UDP: gmail.com. Both TCP and UDP queries succeeded. Remote DNS test passed. Checking MX servers listed for [email protected]. Connecting to gmail-smtp-in.l.google.com [209.85.199.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to gmail-smtp-in.l.google.com. Connecting to gmail-smtp-in.l.google.com [209.85.199.114] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to gmail-smtp-in.l.google.com. Connecting to alt2.gmail-smtp-in.l.google.com [209.85.135.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt2.gmail-smtp-in.l.google.com. Connecting to alt2.gmail-smtp-in.l.google.com [209.85.135.114] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt2.gmail-smtp-in.l.google.com. Connecting to alt1.gmail-smtp-in.l.google.com [209.85.133.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt1.gmail-smtp-in.l.google.com. Connecting to alt2.gmail-smtp-in.l.google.com [74.125.79.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt2.gmail-smtp-in.l.google.com. Connecting to alt2.gmail-smtp-in.l.google.com [74.125.79.114] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt2.gmail-smtp-in.l.google.com. Connecting to alt1.gmail-smtp-in.l.google.com [209.85.133.114] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to alt1.gmail-smtp-in.l.google.com. Connecting to gsmtp183.google.com [64.233.183.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to gsmtp183.google.com. Connecting to gsmtp147.google.com [209.85.147.27] on port 25. Connecting to the server failed. Error: 10051 Failed to submit mail to gsmtp147.google.com. I'm using ASP.NET 2.0, Windows 2003 Server and the IIS that comes with it. Can you tell me what else to change to fix the problem? Thanks @mattlant This is a dedicated server that's why I'm installing the SMTP manually. EDIT: I use exchange so its a little different, but its called a smart host in exchange, but in plain SMTP service config i think its called something else. Cant remember exactly the setting name. Thank you for pointing me at the Smart host field. Mail is getting delivered now. In the Default SMTP Virtual Server properties, the Delivery tab, click Advanced and fill the "Smart host" field with the address that your provider gives you. In my case (GoDaddy) it was k2smtpout.secureserver.net. More info here: http://help.godaddy.com/article/1283

  Read the article

• How to configure a WCF service to only accept a single client identified by a x509 certificate

  - by Johan Levin

  I have a WCF client/service app that relies on secure communication between two machines and I want to use use x509 certificates installed in the certificate store to identify the server and client to each other. I do this by configuring the binding as <security authenticationMode="MutualCertificate"/>. There is only client machine. The server has a certificate issued to server.mydomain.com installed in the Local Computer/Personal store and the client has a certificate issued to client.mydomain.com installed in the same place. In addition to this the server has the client's public certificate in Local Computer/Trusted People and the client has the server's public certificate in Local Computer/Trusted People. Finally the client has been configured to check the server's certificate. I did this using the system.servicemodel/behaviors/endpointBehaviors/clientCredentials/serviceCertificate/defaultCertificate element in the config file. So far so good, this all works. My problem is that I want to specify in the server's config file that only clients that identify themselves with the client.mydomain.com certificate from the Trusted People certificate store are allowed to connect. The correct information is available on the server using the ServiceSecurityContext, but I am looking for a way to specify in app.config that WCF should do this check instead of my having to check the security context from code. Is that possible? Any hints would be appreciated. By the way, my server's config file looks like this so far: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <services> <service name="MyServer.Server" behaviorConfiguration="CertificateBehavior"> <endpoint contract="Contracts.IMyService" binding="customBinding" bindingConfiguration="SecureConfig"> </endpoint> <host> <baseAddresses> <add baseAddress="http://localhost/SecureWcf"/> </baseAddresses> </host> </service> </services> <behaviors> <serviceBehaviors> <behavior name="CertificateBehavior"> <serviceCredentials> <serviceCertificate storeLocation="LocalMachine" x509FindType="FindBySubjectName" findValue="server.mydomain.com"/> </serviceCredentials> </behavior> </serviceBehaviors> </behaviors> <bindings> <customBinding> <binding name="SecureConfig"> <security authenticationMode="MutualCertificate"/> <httpTransport/> </binding> </customBinding> </bindings> </system.serviceModel> </configuration>

  Read the article

• Unable to use factory girl with Cucumber and rails 3 (bundler problem)

  - by jbpros

  Hi there, I'm trying to run cucumber features with factory girl factories on a fresh Rails 3 application. Here is my Gemfile: source "http://gemcutter.org" gem "rails", "3.0.0.beta" gem "pg" gem "factory_girl", :git => "git://github.com/thoughtbot/factory_girl.git", :branch => "rails3" gem "rspec-rails", ">= 2.0.0.beta.4" gem "capybara" gem "database_cleaner" gem "cucumber-rails", :require => false Then the bundle install commande just runs smoothly: $ bundle install /usr/lib/ruby/gems/1.8/gems/bundler-0.9.3/lib/bundler/installer.rb:81:Warning: Gem::Dependency#version_requirements is deprecated and will be removed on or after August 2010. Use #requirement Updating git://github.com/thoughtbot/factory_girl.git Fetching source index from http://gemcutter.org Resolving dependencies Installing abstract (1.0.0) from system gems Installing actionmailer (3.0.0.beta) from system gems Installing actionpack (3.0.0.beta) from system gems Installing activemodel (3.0.0.beta) from system gems Installing activerecord (3.0.0.beta) from system gems Installing activeresource (3.0.0.beta) from system gems Installing activesupport (3.0.0.beta) from system gems Installing arel (0.2.1) from system gems Installing builder (2.1.2) from system gems Installing bundler (0.9.13) from system gems Installing capybara (0.3.6) from system gems Installing cucumber (0.6.3) from system gems Installing cucumber-rails (0.3.0) from system gems Installing culerity (0.2.9) from system gems Installing database_cleaner (0.5.0) from system gems Installing diff-lcs (1.1.2) from system gems Installing erubis (2.6.5) from system gems Installing factory_girl (1.2.3) from git://github.com/thoughtbot/factory_girl.git (at rails3) Installing ffi (0.6.3) from system gems Installing i18n (0.3.6) from system gems Installing json_pure (1.2.3) from system gems Installing mail (2.1.3) from system gems Installing memcache-client (1.7.8) from system gems Installing mime-types (1.16) from system gems Installing nokogiri (1.4.1) from system gems Installing pg (0.9.0) from system gems Installing polyglot (0.3.0) from system gems Installing rack (1.1.0) from system gems Installing rack-mount (0.4.7) from system gems Installing rack-test (0.5.3) from system gems Installing rails (3.0.0.beta) from system gems Installing railties (3.0.0.beta) from system gems Installing rake (0.8.7) from system gems Installing rspec (2.0.0.beta.4) from system gems Installing rspec-core (2.0.0.beta.4) from system gems Installing rspec-expectations (2.0.0.beta.4) from system gems Installing rspec-mocks (2.0.0.beta.4) from system gems Installing rspec-rails (2.0.0.beta.4) from system gems Installing selenium-webdriver (0.0.17) from system gems Installing term-ansicolor (1.0.5) from system gems Installing text-format (1.0.0) from system gems Installing text-hyphen (1.0.0) from system gems Installing thor (0.13.4) from system gems Installing treetop (1.4.4) from system gems Installing tzinfo (0.3.17) from system gems Installing webrat (0.7.0) from system gems Your bundle is complete! When I run cucumber, here is the error I get: $ rake cucumber (in /home/jbpros/projects/deorbitburn) /usr/lib/ruby/gems/1.8/gems/bundler-0.9.3/lib/bundler/resolver.rb:97:Warning: Gem::Dependency#version_requirements is deprecated and will be removed on or after August 2010. Use #requirement NOTICE: CREATE TABLE will create implicit sequence "posts_id_seq" for serial column "posts.id" NOTICE: CREATE TABLE / PRIMARY KEY will create implicit index "posts_pkey" for table "posts" /usr/bin/ruby1.8 -I "/usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/lib:lib" "/usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/cucumber" --profile default Using the default profile... git://github.com/thoughtbot/factory_girl.git (at rails3) is not checked out. Please run `bundle install` (Bundler::PathError) /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/source.rb:282:in `load_spec_files' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/source.rb:190:in `local_specs' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:36:in `runtime_gems' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:35:in `each' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:35:in `runtime_gems' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/index.rb:5:in `build' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:34:in `runtime_gems' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:14:in `index' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/index.rb:5:in `build' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:13:in `index' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:55:in `resolve_locally' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:28:in `specs' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:65:in `specs_for' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/environment.rb:23:in `requested_specs' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler/runtime.rb:18:in `setup' /home/jbpros/.bundle/gems/bundler-0.9.13/lib/bundler.rb:68:in `setup' /home/jbpros/projects/deorbitburn/config/boot.rb:7 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `polyglot_original_require' /usr/lib/ruby/gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in `require' /home/jbpros/projects/deorbitburn/config/application.rb:1 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `polyglot_original_require' /usr/lib/ruby/gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in `require' /home/jbpros/projects/deorbitburn/config/environment.rb:2 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `polyglot_original_require' /usr/lib/ruby/gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in `require' /home/jbpros/projects/deorbitburn/features/support/env.rb:8 /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `gem_original_require' /usr/local/lib/site_ruby/1.8/rubygems/custom_require.rb:31:in `polyglot_original_require' /usr/lib/ruby/gems/1.8/gems/polyglot-0.3.0/lib/polyglot.rb:65:in `require' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/rb_support/rb_language.rb:124:in `load_code_file' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:85:in `load_code_file' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:77:in `load_code_files' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:76:in `each' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/step_mother.rb:76:in `load_code_files' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/cli/main.rb:48:in `execute!' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/../lib/cucumber/cli/main.rb:20:in `execute' /usr/lib/ruby/gems/1.8/gems/cucumber-0.6.3/bin/cucumber:8 rake aborted! Command failed with status (1): [/usr/bin/ruby1.8 -I "/usr/lib/ruby/gems/1....] (See full trace by running task with --trace) Do I have to do something special for bundler to check out factory girl's repository on github?

  Read the article

• Reciving UDP packets on iPhone

  - by Eli

  I'm trying to establish UDP communication between a MAC OS and an iPod through Wi-Fi, at this point I'm able to send packets from the iPod and I can see those packets have the right MAC and ip addresses (I'm using wireshark to monitor the network) but the MAC receives the packets only when the wireshark is on, otherwise recvfrom() returns -1. When I try to transmit from MAC to iPhone I have the same result, I can see the packets are sent but the iPhone doesn't seem to get them. I'm using the next code to send: struct addrinfo hints; int rv; memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_DGRAM; if ((rv = getaddrinfo(IP, SERVERPORT, &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return 1; } // loop through all the results and make a socket for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("talker: socket"); continue; } break; } if (p == NULL) { fprintf(stderr, "talker: failed to bind socket\n"); return 2; } while (cond) sntBytes += sendto(sockfd, message, strlen(message), 0, p->ai_addr, p->ai_addrlen); return 0; and this code to receive: struct addrinfo hints, *p; int rv; memset(&hints, 0, sizeof hints); hints.ai_family = AF_UNSPEC; // set hints.ai_socktype = SOCK_DGRAM; hints.ai_flags = AI_PASSIVE; // use to AF_INET to force IPv4 my IP if ((rv = getaddrinfo(NULL, MYPORT, &hints, &servinfo)) != 0) { fprintf(stderr, "getaddrinfo: %s\n", gai_strerror(rv)); return 1; } // loop through all the results and bind to the first we can for(p = servinfo; p != NULL; p = p->ai_next) { if ((sockfd = socket(p->ai_family, p->ai_socktype, p->ai_protocol)) == -1) { perror("listener: socket"); continue; } if (bind(sockfd, p->ai_addr, p->ai_addrlen) == -1) { close(sockfd); perror("listener: bind"); continue; } break; } if (p == NULL) { fprintf(stderr, "listener: failed to bind socket\n"); return 2; } addr_len = sizeof their_addr; fcntl(sockfd, F_SETFL,O_NONBLOCK); int rcvbuf_size = 128 * 1024; // That's 128Kb of buffer space. setsockopt(sockfd, SOL_SOCKET, SO_RCVBUF, &rcvbuf_size, sizeof(rcvbuf_size)); printf("listener: waiting to recvfrom...\n"); while (cond) rcvBytes = recvfrom(sockfd, buf, MAXBUFLEN-1 , 0, (struct sockaddr *)&their_addr, &addr_len); return 0; What am I missing?

  Read the article

• curl_init undefined?

  - by udaya

  Hi I am importing the contacts from gmail to my page ..... The process doesnot work due to this error 'curl_init' is not defined The suggestion i got is to 1.uncomment destination curl.dll 2.copy the following libraries to the windows/system32 dir. ssleay32.dll libeay32.dll 3.copy php_curl.dll to windows/system32 After trying all these i refreshed my xampp Even then error occurs This is my page where i am trying to import the gmail contacts ` // set URL and other appropriate options curl_setopt($ch, CURLOPT_URL, "http://www.example.com/"); curl_setopt($ch, CURLOPT_HEADER, 0); // grab URL and pass it to the browser curl_exec($ch); // close cURL resource, and free up system resources curl_close($ch); ? "HOSTED_OR_GOOGLE", "Email" = $_POST['Email'], echo "Passwd" = $_POST['Passwd'], "service" = "cp", "source" = "tutsmore/1.2" ); //Now we are going to post these datas to the clientLogin url. // Initialize the curl object with the $curl = curl_init($clientlogin_url); //Make the post true curl_setopt($curl, CURLOPT_POST, true); //Passing the above array of parameters. curl_setopt($curl, CURLOPT_POSTFIELDS, $clientlogin_post); //Set this for authentication and ssl communication. curl_setopt($curl, CURLOPT_HTTPAUTH, CURLAUTH_ANY); //provide false to not to check the server for the certificate. curl_setopt($curl, CURLOPT_SSL_VERIFYPEER, false); //Tell curl to just don't echo the data but return it to a variable. curl_setopt($curl, CURLOPT_RETURNTRANSFER, 1); //The variable containing response $response = curl_exec($curl); //Check whether the user is successfully login using the preg_match and save the auth key if the user //is successfully logged in preg_match("/Auth=([a-z0-9_-]+)/i", $response, $matches); $auth = $matches[1]; // Include the Auth string in the headers $headers = array("Authorization: GoogleLogin auth=" . $auth); // Make the request to the google contacts feed with the auth key $curl = curl_init('http://www.google.com/m8/feeds/contacts/default/full?max-results=10000'); //passing the headers of auth key. curl_setopt($curl, CURLOPT_HTTPHEADER, $headers); //Return the result in a variable curl_setopt($curl, CURLOPT_RETURNTRANSFER, 1); //the variable with the response. $feed = curl_exec($curl); //Create empty array of contacts echo "contacts".$contacts=array(); //Initialize the DOMDocument object $doc=new DOMDocument(); //Check whether the feed is empty //If not empty then load that feed. if (!empty($feed)) $doc-loadHTML($feed); //Initialize the domxpath object and provide the loaded feed $xpath=new DOMXPath($doc); //Get every entry tags from the feed. $query="//entry"; $data=$xpath-query($query); //Process each entry tag foreach ($data as $node) { //children of each entry tag. $entry_nodes=$node-childNodes; //Create a temproray array. $tempArray=array(); //Process the child node of the entry tag. foreach($entry_nodes as $child) { //get the tagname of the child node. $domNodesName=$child-nodeName; switch($domNodesName) { case 'title' : { $tempArray['fullName']=$child-nodeValue; } break; case 'email' : { if (strpos($child-getAttribute('rel'),'home')!==false) $tempArray['email_1']=$child-getAttribute('address'); elseif(strpos($child-getAttribute('rel'),'work')!=false) $tempArray['email_2']=$child-getAttribute('address'); elseif(strpos($child-getAttribute('rel'),'other')!==false) $tempArray['email_3']=$child-getAttribute('address'); } break; } } if (!empty($tempArray['email_1']))$contacts[$tempArray['email_1']]=$tempArray; if(!empty($tempArray['email_2'])) $contacts[$tempArray['email_2']]=$tempArray; if(!empty($tempArray['email_3'])) $contacts[$tempArray['email_3']]=$tempArray; } foreach($contacts as $key=$val) { //Echo the email echo $key.""; } } else { //The form ? " method="POST" Email: Password: tutsmore don't save your email and password trust us. ` code is completely provided for debugging if any optimization is needed i will try to optimize the code

  Read the article

• WCF service using duplex channel in different domains

  - by ds1

  I have a WCF service and a Windows client. They communicate via a Duplex WCF channel which when I run from within a single network domain runs fine, but when I put the server on a separate network domain I get the following message in the WCF server trace... The message with to 'net.tcp://abc:8731/ActiveAreaService/mex/mex' cannot be processed at the receiver, due to an AddressFilter mismatch at the EndpointDispatcher. Check that the sender and receiver's EndpointAddresses agree. So, it looks like the communication just work in one direction (from client to server) if the components are in two separate domains. The Network domains are fully trusted, so I'm a little confused as to what else could cause this? Server app.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <behaviors> <serviceBehaviors> <behavior name="JobController.ActiveAreaBehavior"> <serviceMetadata httpGetEnabled="false" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="JobController.ActiveAreaBehavior" name="JobController.ActiveAreaServer"> <endpoint address="mex" binding="mexTcpBinding" bindingConfiguration="" contract="IMetadataExchange" /> <host> <baseAddresses> <add baseAddress="net.tcp://SERVER:8731/ActiveAreaService/" /> </baseAddresses> </host> </service> </services> </system.serviceModel> </configuration> but I also add an end point programmatically in Visual C++ host = gcnew ServiceHost(ActiveAreaServer::typeid); NetTcpBinding^ binding = gcnew NetTcpBinding(); binding->MaxBufferSize = Int32::MaxValue; binding->MaxReceivedMessageSize = Int32::MaxValue; binding->ReceiveTimeout = TimeSpan::MaxValue; binding->Security->Mode = SecurityMode::Transport; binding->Security->Transport->ClientCredentialType = TcpClientCredentialType::Windows; ServiceEndpoint^ ep = host->AddServiceEndpoint(IActiveAreaServer::typeid, binding, String::Empty); // Use the base address Client app.config <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.serviceModel> <bindings> <netTcpBinding> <binding name="NetTcpBinding_IActiveAreaServer" closeTimeout="00:01:00" openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00" transactionFlow="false" transferMode="Buffered" transactionProtocol="OleTransactions" hostNameComparisonMode="StrongWildcard" listenBacklog="10" maxBufferPoolSize="524288" maxBufferSize="65536" maxConnections="10" maxReceivedMessageSize="65536"> <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384" maxBytesPerRead="4096" maxNameTableCharCount="16384" /> <reliableSession ordered="true" inactivityTimeout="00:10:00" enabled="false" /> <security mode="Transport"> <transport clientCredentialType="Windows" protectionLevel="EncryptAndSign" /> <message clientCredentialType="Windows" /> </security> </binding> </netTcpBinding> </bindings> <client> <endpoint address="net.tcp://SERVER:8731/ActiveAreaService/" binding="netTcpBinding" bindingConfiguration="NetTcpBinding_IActiveAreaServer" contract="ActiveArea.IActiveAreaServer" name="NetTcpBinding_IActiveAreaServer"> <identity> <userPrincipalName value="[email protected]" /> </identity> </endpoint> </client> </system.serviceModel> </configuration> Any help is appreciated! Cheers

  Read the article

• Failure in Yahoo Authentication in Android

  - by Jayson Tamayo

  I'm trying to integrate Yahoo into my application. I want them to login using their Yahoo accounts because I will be needing their names later in the application. But whenever I request for a token, I receive the following errors: getRequestToken() Exception: oauth.signpost.exception.OAuthCommunicationException: Communication with the service provider failed: Service provider responded in error: 400 (Bad Request) Here is my code (Request_Token_Activity.java): import oauth.signpost.OAuth; import oauth.signpost.OAuthConsumer; import oauth.signpost.OAuthProvider; import oauth.signpost.commonshttp.CommonsHttpOAuthConsumer; import oauth.signpost.commonshttp.CommonsHttpOAuthProvider; import oauth.signpost.signature.HmacSha1MessageSigner; import android.app.Activity; import android.content.Intent; import android.content.SharedPreferences; import android.content.SharedPreferences.Editor; import android.net.Uri; import android.os.Bundle; import android.preference.PreferenceManager; import android.util.Log; public class Request_Token_Activity extends Activity { private OAuthConsumer consumer; private OAuthProvider provider; private SharedPreferences prefs; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); try { consumer = new CommonsHttpOAuthConsumer("my consumer key", "my consumer secret"); consumer.setMessageSigner(new HmacSha1MessageSigner()); provider = new CommonsHttpOAuthProvider( "http://api.login.yahoo.com/oauth/v2/get_request_token", "http://api.login.yahoo.com/oauth/v2/get_token", "http://api.login.yahoo.com/oauth/v2/request_auth"); } catch (Exception e) { Log.e("", "onCreate Exception: " + e.toString()); } getRequestToken(); } private void getRequestToken() { try { String url = provider.retrieveRequestToken(consumer, "yahooapi://callback"); Log.i("", "Yahoo URL: " + url); Intent intent = new Intent(Intent.ACTION_VIEW, Uri.parse(url)).setFlags(Intent.FLAG_ACTIVITY_SINGLE_TOP | Intent.FLAG_ACTIVITY_NO_HISTORY | Intent.FLAG_FROM_BACKGROUND); this.startActivity(intent); } catch (Exception e) { Log.i("", "getRequestToken() Exception: " + e.toString()); } } @Override public void onNewIntent(Intent intent) { super.onNewIntent(intent); prefs = PreferenceManager.getDefaultSharedPreferences(this); final Uri uri = intent.getData(); if (uri != null && uri.getScheme().equals("yahooapi")) { getAccessToken(uri); } } private void getAccessToken(Uri uri) { final String oauth_verifier = uri.getQueryParameter(OAuth.OAUTH_VERIFIER); try { provider.retrieveAccessToken(consumer, oauth_verifier); final Editor edit = prefs.edit(); edit.putString("YAHOO_OAUTH_TOKEN", consumer.getToken()); edit.putString("YAHOO_OAUTH_TOKEN_SECRET", consumer.getTokenSecret()); edit.commit(); String token = prefs.getString("YAHOO_OAUTH_TOKEN", ""); String secret = prefs.getString("YAHOO_OAUTH_TOKEN_SECRET", ""); consumer.setTokenWithSecret(token, secret); Log.i("", "Yahoo OAuth Token: " + token); Log.i("", "Yahoo OAuth Token Secret: " + token); } catch (Exception e) { Log.i("", "getAccessToken Exception: " + e.toString()); } } } And this is a snapshot of my AndroidManifest.xml: <activity android:name="Request_Token_Activity" android:launchMode="singleTask"> <intent-filter> <action android:name="android.intent.action.VIEW" /> <category android:name="android.intent.category.DEFAULT" /> <category android:name="android.intent.category.BROWSABLE" /> <data android:scheme="yahooapi" android:host="callback" /> </intent-filter> </activity> I have set-up my Yahoo Project as a Web Application and put Read and Write access to Social and Contacts. What am I doing wrong?

  Read the article

• Trying to draw 2 objects on screen and store the selected item names in an array

  - by thefonso

  Ok...this is a homework question, here is what i'm asked to do.... "Allow the user to draw two Shapes, which when instantiated, get put into the array myShapes...(store the shapes in the createShape() method." I want to know if I'm going in the right direction. Do I need to modify only Model.java or GUIDemo.java as well? Am I sufficient in thinking of only storing the values for the array via a loop inside my createShape() method? How do I go a bout checking to see if things work so far. There are many steps for this homework project after this one but i'm stuck here. Please point me in the right direction. The array myShapes lives inside my model class inside Model.java: package model; import java.awt.Color; import java.awt.Container; import shapes.Line; import shapes.Oval; import shapes.Rectangle; import shapes.Shape; import shapes.Triangle; import interfaces.Resettable; public class Model implements Resettable { private Container container; private String message; public final static String DRAW = "Draw"; public final static String MOVE = "Move"; public final static String REMOVE = "Remove"; public final static String RESIZE = "Resize"; public final static String FILL = "Fill"; public final static String CHANGE = "Change"; public final static String RECTANGLE = "Rectangle"; public final static String OVAL = "Oval"; public final static String LINE = "Line"; public final static String TRIANGLE = "Triangle"; private String action = DRAW; private boolean fill = false; public static String[] selections = {"Rectangle", "Oval", "Line", "Triangle"}; //project 9 begin public Shape[] myShapes = new Shape[2]; //project 9 stop private String currentShapeType; private Shape currentShape; public Color lineColor; private Color fillColor = Color.gray; public Shape createShape() { if(currentShapeType == RECTANGLE){ currentShape = new Rectangle(0, 0, 0, 0, lineColor, fillColor, fill); } if(currentShapeType == OVAL) { currentShape = new Oval(0,0,0,0, lineColor, fillColor, fill); } if(currentShapeType == LINE) { currentShape = new Line(0,0,0,0, lineColor, fillColor, fill); } if(currentShapeType == TRIANGLE) { currentShape = new Triangle(0,0,0,0, lineColor, fillColor, fill); } //project 9 start if(myShapes[0] == null) { myShapes[0]=currentShape; } else { myShapes[1]=currentShape; } //project 9 stop return currentShape; } public Shape getCurrentShape() { return currentShape; } public String getCurrentShapeType(){ return currentShapeType; } public void setCurrentShapeType(String shapeType){ currentShapeType = shapeType; } public Model(Container container) { this.container = container; } public void repaint() { container.repaint(); } public void resetComponents() { action = DRAW; currentShape = null; if (container instanceof Resettable) { ((Resettable) container).resetComponents(); } } public String getAction() { return action; } public void setAction(String action) { this.action = action; } public boolean isFill() { return fill; } public void setFill(boolean fill) { this.fill = fill; } public void setMessage(String msg) { this.message = msg; } public String getMessage() { return this.message; } public Color getLineColor() { return this.lineColor; } public void setLineColor(Color c) { this.lineColor = c; } public String toString() { return "Model:\n\tAction: " + action + "\n\tFill: " + fill; } } The application is run from GUIDemo.java: package ui.applet; import interfaces.Resettable; import java.applet.Applet; import java.awt.Graphics; import event.ShapeMouseHandler; import shapes.Shape; //import ui.panels.ButtonPanel; import ui.panels.ChoicePanel; import ui.panels.MainPanel; import model.Model; @SuppressWarnings("serial") public class GUIDemo extends Applet implements Resettable { MainPanel mainPanel; Model model; ChoicePanel choicePanel; public void init() { resize(600,400); model = new Model(this); choicePanel = new ChoicePanel(model); mainPanel = new MainPanel(model); this.add(choicePanel);//this is the drop down list this.add(mainPanel);//these are the radio buttons and reset button ShapeMouseHandler mouseHandler = new ShapeMouseHandler(model); addMouseListener(mouseHandler); addMouseMotionListener(mouseHandler); } public void paint(Graphics g) { Shape shape; shape = model.getCurrentShape(); if(shape != null) { shape.draw(g); } System.out.println(model); System.out.println(shape); } public void resetComponents() { mainPanel.resetComponents(); choicePanel.resetComponents(); } }

  Read the article

• Rendering a Long Document on iPad

  - by benjismith

  I'm implementing a document viewer with highlighting/annotation capabilities for a custom document format on iPad. The documents are kind of long (100 to 200 pages, if printed on paper) and I've had a hard time finding the right approach. Here are the requirments: 1) Basic rich-text styling: control of left/right margins. Control of font name, size, foreground/background color, and line spacing. Bold, italics, underline, etc. 2) Selection and highlighting of arbitrary text regions (not limited to paragraph boundaries, like in Safari/UIWebView). 3) Customization of the Cut/Copy/Paste popup (what is that thing called anyhow? UIActionBar?) This is one of the essential requirements of the app. My first implementation was based on UIWebView. I just rendered the document as HTML with CSS for text styling. But I couldn't get the kind of text selection behavior I wanted (across paragraph boundaries) and the UIActionBar can't be customized from within UIWebView. So I started working on a javascript approach, faking the device text-selection behavior using JQuery to trap touch events and dynamically modifying the DOM to change the background color of selected regions of text. I built a fake UIActionBar control as a hidden DIV, positioning it and unhiding it whenever there was an active selection region. Not too shabby. The main problem is that it's SLOOOOOOOW. Scrolling through the document is nice and quick, but dynamically changing the DOM is not very snappy. Plus, I couldn't figure out how to recreate the magnifier loupe, so my fake text-selection GUI doesn't look quite the same as the native implementation. Also, I haven't yet implemented the communication bridge between the javascript layer and the objective-c layer (where the rest of the app lives), but it was shaping up to be a huge hassle. So I've been looking at CoreText, but there are precious few examples on the web. I spent a little time with this simple little demo: http://github.com/jonasschnelli/I7CoreTextExample/ It shows how to use CoreText to draw an NSAttributedText string into a UIView. But it has its own problems: It doesn't implement text-selection behavior, and it doesn't present a UIActionBar, so I don't have any idea how to make that happen. And, more importantly, it tries to draw the entire document all at once, with significant performance degradations for long documents. My documents can have thousands of paragraphs, and less than 1% of the document is ever on screen at a time. On the plus side, these documents already contain precise formatting information. I know the exact page-position of every line of text, so I don't need a layout engine. Does anyone know how to implement this sort of view using CoreText? I understand that a full-fledged implementation is overkill for a question like this, but I'm looking for a good CoreText example with a few basic requirements: 1) Precise layout & formatting control (using the formatting metrics and text styles I've already calculated). 2) Arbitrary selection of text. 3) Customization of the UIActionBar. 4) Efficient recycling of resources for off-screen objects. I'd be happy to implement my own recycling when text elements scroll off-screen, but wouldn't that require re-implementing UIScrollView? I'm brand-new to iPhone development, and still getting used to Objective-C, but I've been working in other languages (Java, C#, flex/actionscript, etc) for more than ten years, so I feel confident in my ability to get the work done, if only I had a better feel for the iPhone SDK and the common coding patterns for stuff like this. Is it just me, or does the SDK documentation really suck? Anyhow, thanks for your help!

  Read the article

• Recommended integration mechanism for bi-directional, authenticated, encrypted connection in C clien

  - by rcampbell

  Let me first give an example. Imagine you have a single server running a JVM application. This server keeps a collection of N equations, once for each client: Client #1: 2x Client #2: 1 + y Client #3: z/4 This server includes an HTTP interface so that random visitors can type https://www.acme.com/client/3 int their browsers and see the latest evaluated result of z/4. The tricky part is that either the client or the server may change the variable value at any time, informing the other party immediately. More specifically, Client #3 - a C app - can initially tell the server that z = 20. An hour later that same client informs the server that z = 23. Likewise the server can later inform the client that z = 28. As caf pointed out in the comments, there can be a race condition when values are changed by the client and server simultaneously. The solution would be for both client and server to send the operation performed in their message, which would need to be executed by the other party. To keep things simple, let's limit the operations to (commutative) addition, allowing us to disregard message ordering. For example, the client seeds the server with z = 20: server:z=20, client:z=20 server sends {+3} message (so z=23 locally) & client sends {-2} message (so z=18 locally) at the exact same time server receives {-2} message at some point, adds to his local copy so z=21 client receives {+3} message at some point, adds to his local copy so z=21 As long as all messages are eventually evaluated by both parties, the correct answer will eventually be given to the users of the client and server since we limited ourselves to commutative operations (addition of 3 and -2). This does mean that both client and server can be returning incorrect answers in the time it takes for messages to be exchanged and processed. While undesirable, I believe this is unavoidable. Some possible implementations of this idea include: Open an encrypted, always on TCP socket connection for communication Pros: no additional infrastructure needed, client and server know immediately if there is a problem (disconnect) with the other party, fairly straightforward (except the the encryption), native support from both JVM and C platforms Cons: pretty low-level so you end up writing a lot yourself (protocol, delivery verification, retry-on-failure logic), probably have a lot of firewall headaches during client app installation Asynchronous messaging (ex: ActiveMQ) Pros: transactional, both C & Java integration, free up the client and server apps from needing retry logic or delivery verification, pretty straightforward encryption, easy extensibility via message filters/routers/etc Cons: need additional infrastructure (message server) which must never fail, Database or file system as asynchronous integration point Same pros/cons as above but messier RESTful Web Service Pros: simple, possible reuse of the server's existing REST API, SSL figures out the encryption problem for you (maybe use RSA key a la GitHub for authentication?) Cons: Client now needs to run a C HTTP REST server w/SSL, client and server need retry logic. Axis2 has both a Java and C version, but you may be limited to SOAP. What other techniques should I be evaluating? What real world experiences have you had with these mechanisms? Which do you recommend for this problem and why?

  Read the article

• TDD - beginner problems and stumbling blocks

  - by Noufal Ibrahim

  While I've written unit tests for most of the code I've done, I only recently got my hands on a copy of TDD by example by Kent Beck. I have always regretted certain design decisions I made since they prevented the application from being 'testable'. I read through the book and while some of it looks alien, I felt that I could manage it and decided to try it out on my current project which is basically a client/server system where the two pieces communicate via. USB. One on the gadget and the other on the host. The application is in Python. I started off and very soon got entangled in a mess of rewrites and tiny tests which I later figured didn't really test anything. I threw away most of them and and now have a working application for which the tests have all coagulated into just 2. Based on my experiences, I have a few questions which I'd like to ask. I gained some information from http://stackoverflow.com/questions/1146218/new-to-tdd-are-there-sample-applications-with-tests-to-show-how-to-do-tdd but have some specific questions which I'd like answers to/discussion on. Kent Beck uses a list which he adds to and strikes out from to guide the development process. How do you make such a list? I initially had a few items like "server should start up", "server should abort if channel is not available" etc. but they got mixed and finally now, it's just something like "client should be able to connect to server" (which subsumed server startup etc.). How do you handle rewrites? I initially selected a half duplex system based on named pipes so that I could develop the application logic on my own machine and then later add the USB communication part. It them moved to become a socket based thing and then moved from using raw sockets to using the Python SocketServer module. Each time things changed, I found that I had to rewrite considerable parts of the tests which was annoying. I'd figured that the tests would be a somewhat invariable guide during my development. They just felt like more code to handle. I needed a client and a server to communicate through the channel to test either side. I could mock one of the sides to test the other but then the whole channel wouldn't be tested and I worry that I'd miss that. This detracted from the whole red/green/refactor rhythm. Is this just lack of experience or am I doing something wrong? The "Fake it till you make it" left me with a lot of messy code that I later spent a lot of time to refactor and clean up. Is this the way things work? At the end of the session, I now have my client and server running with around 3 or 4 unit tests. It took me around a week to do it. I think I could have done it in a day if I were using the unit tests after code way. I fail to see the gain. I'm looking for comments and advice from people who have implemented large non trivial projects completely (or almost completely) using this methodology. It makes sense to me to follow the way after I have something already running and want to add a new feature but doing it from scratch seems to tiresome and not worth the effort. P.S. : Please let me know if this should be community wiki and I'll mark it like that. Update 0 : All the answers were equally helpful. I picked the one I did because it resonated with my experiences the most. Update 1: Practice Practice Practice!

  Read the article

• C#: Parallel forms, multithreading and "applications in application"

  - by Harry

  First, what I need is - n WebBrowser-s, each in its own window doing its own job. The user should be able to see them all, or just one of them (or none), and to execute commands on each one. There is a main form, without a browser, this one contains control panel for my application. The key feautre is, each browser logs on to secured web page and it needs to stay logged in as long as possible. Well, I've done it, but I'm afraid something is wrong with my approach. The question is: Is code below valid, or rather a nasty hack which can cause problems: internal class SessionList : List<Session> { public SessionList(Server main) { MyRecords.ForEach(record => { var st = new System.Threading.Thread((data) => { var s = new Session(main, data as MyRecord); this.Add(s); Application.Run(s); Application.ExitThread(); }); st.SetApartmentState(System.Threading.ApartmentState.STA); st.Start(record); }); } // some other uninteresting methods here... } What's going on here? Session inherits from Form, so it creates a form, puts WebBrowser into it, and has methods to operate on websites. WebBrowser requires to be run in STA thread, so we provide one for each browser. The most interesting part of it is Application.Run(s). It makes the newly created forms alive and interactive. The next Application.ExitThread() is called after browser window is closed and its controls disposed. Main application stays alive to perform the rest of the cleanup job. When user select "Exit" or "Shutdown" option - first the browser threads are ended, so Application.ExitThread() is called. It all works, but everywhere I can read about "main GUI thread" - and here - I've created many GUI threads. I handle communication between main form and my new forms (sessions) with thread-safe methods using Invoke(). It all works, so is it right or is it wrong? Is everything right with using Application.Run() more than once in one application? :) An ugly hack or a normal practice? This code dies if I start a WebBrowser from the session form thread. It beats me why. It works however if I start WebBrowser (by changing its Url property) from any other thread. I'd like to know more what is really happening in such application. But most of all - I'd like to know if my idea of "applications in application" is OK. I'm not sure what exactly does Application.Run() do. Without it forms created in new threads were dead unresponsive. How is it possible I can call Application.Run() many times? It seems to do exactly what it should, but it seems a little undocumented feature to me. I'm almost sure, that the crashes are caused by WebBrowser component itself (since it's not completely "managed" and "native"). But maybe it's something else.

  Read the article

• Designing an API with compile-time option to remove first parameter to most functions and use a glob

  - by tomlogic

  I'm trying to design a portable API in ANSI C89/ISO C90 to access a wireless networking device on a serial interface. The library will have multiple network layers, and various versions need to run on embedded devices as small as an 8-bit micro with 32K of code and 2K of data, on up to embedded devices with a megabyte or more of code and data. In most cases, the target processor will have a single network interface and I'll want to use a single global structure with all state information for that device. I don't want to pass a pointer to that structure through the network layers. In a few cases (e.g., device with more resources that needs to live on two networks) I will interface to multiple devices, each with their own global state, and will need to pass a pointer to that state (or an index to a state array) through the layers. I came up with two possible solutions, but neither one is particularly pretty. Keep in mind that the full driver will potentially be 20,000 lines or more, cover multiple files, and contain hundreds of functions. The first solution requires a macro that discards the first parameter for every function that needs to access the global state: // network.h typedef struct dev_t { int var; long othervar; char name[20]; } dev_t; #ifdef IF_MULTI #define foo_function( x, a, b, c) _foo_function( x, a, b, c) #define bar_function( x) _bar_function( x) #else extern dev_t DEV; #define IFACE (&DEV) #define foo_function( x, a, b, c) _foo_function( a, b, c) #define bar_function( x) _bar_function( ) #endif int bar_function( dev_t *IFACE); int foo_function( dev_t *IFACE, int a, long b, char *c); // network.c #ifndef IF_MULTI dev_t DEV; #endif int bar_function( dev_t *IFACE) { memset( IFACE, 0, sizeof *IFACE); return 0; } int foo_function( dev_t *IFACE, int a, long b, char *c) { bar_function( IFACE); IFACE->var = a; IFACE->othervar = b; strcpy( IFACE->name, c); return 0; } The second solution defines macros to use in the function declarations: // network.h typedef struct dev_t { int var; long othervar; char name[20]; } dev_t; #ifdef IF_MULTI #define DEV_PARAM_ONLY dev_t *IFACE #define DEV_PARAM DEV_PARAM_ONLY, #else extern dev_t DEV; #define IFACE (&DEV) #define DEV_PARAM_ONLY void #define DEV_PARAM #endif int bar_function( DEV_PARAM_ONLY); // I don't like the missing comma between DEV_PARAM and arg2... int foo_function( DEV_PARAM int a, long b, char *c); // network.c #ifndef IF_MULTI dev_t DEV; #endif int bar_function( DEV_PARAM_ONLY) { memset( IFACE, 0, sizeof *IFACE); return 0; } int foo_function( DEV_PARAM int a, long b, char *c) { bar_function( IFACE); IFACE->var = a; IFACE->othervar = b; strcpy( IFACE->name, c); return 0; } The C code to access either method remains the same: // multi.c - example of multiple interfaces #define IF_MULTI #include "network.h" dev_t if0, if1; int main() { foo_function( &if0, -1, 3.1415926, "public"); foo_function( &if1, 42, 3.1415926, "private"); return 0; } // single.c - example of a single interface #include "network.h" int main() { foo_function( 11, 1.0, "network"); return 0; } Is there a cleaner method that I haven't figured out? I lean toward the second since it should be easier to maintain, and it's clearer that there's some macro magic in the parameters to the function. Also, the first method requires prefixing the function names with "_" when I want to use them as function pointers. I really do want to remove the parameter in the "single interface" case to eliminate unnecessary code to push the parameter onto the stack, and to allow the function to access the first "real" parameter in a register instead of loading it from the stack. And, if at all possible, I don't want to have to maintain two separate codebases. Thoughts? Ideas? Examples of something similar in existing code? (Note that using C++ isn't an option, since some of the planned targets don't have a C++ compiler available.)

  Read the article

< Previous Page | 152 153 154 155 156 157 158 159 160 161 162  | Next Page >