Search Results

Search found 25894 results on 1036 pages for 'ask the readers'.

Page 157/1036 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• E160 ubuntu 12.04 can't detect the modem

  - by Matt

  i've got problem with e160 on ubuntu 12.04. I'cant configure network manager and connect because NM can't see the e160. I;ve tried lot of solutions with no result. ateusz@mateusz-Aspire-5738:~$ sudo usb_modeswitch -v 0x12d1 -p 0x1003 -H [sudo] password for mateusz: aLooking for default devices ... found matching product ID adding device Found device in default mode, class or configuration (1) Accessing device 002 on bus 001 ... Getting the current device configuration ... OK, got current device configuration (1) Using first interface: 0x00 Using endpoints 0x01 (out) and 0x82 (in) Not a storage device, skipping SCSI inquiry USB description data (for identification) ------------------------- Manufacturer: HUAWEI Technology Product: HUAWEI Mobile Serial No.: not provided ------------------------- Sending Huawei control message ... OK, Huawei control message sent - Run lsusb to note any changes. Bye. Dmesg [ 521.480062] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 521.617792] option 1-4:1.1: GSM modem (1-port) converter detected [ 521.617945] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 521.618062] option 1-4:1.0: GSM modem (1-port) converter detected [ 521.618232] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 530.840276] option: option_instat_callback: error -108 [ 530.840455] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 530.840484] option 1-4:1.0: device disconnected [ 537.680378] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 537.680398] option 1-4:1.1: device disconnected [ 537.792088] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 537.929549] option 1-4:1.1: GSM modem (1-port) converter detected [ 537.929702] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 537.929818] option 1-4:1.0: GSM modem (1-port) converter detected [ 537.929993] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 547.224294] option: option_instat_callback: error -108 [ 547.224470] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 547.224511] option 1-4:1.0: device disconnected [ 556.988066] tty_ldisc_hangup: waiting (usb-storage) for ttyUSB0 took too long, but we keep waiting... [ 558.990663] option1 ttyUSB0: GSM modem (1-port) converter now disconnected from ttyUSB0 [ 558.990698] option 1-4:1.1: device disconnected [ 559.100068] usb 1-4: reset high-speed USB device number 4 using ehci_hcd [ 559.241293] option 1-4:1.1: GSM modem (1-port) converter detected [ 559.241446] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB0 [ 559.241565] option 1-4:1.0: GSM modem (1-port) converter detected [ 559.241739] usb 1-4: GSM modem (1-port) converter now attached to ttyUSB1 [ 568.728283] option: option_instat_callback: error -108 [ 568.728466] option1 ttyUSB1: GSM modem (1-port) converter now disconnected from ttyUSB1 [ 568.728496] option 1-4:1.0: device disconnected lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 003: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 005 Device 002: ID 09da:c20a A4 Tech Co., Ltd Bus 001 Device 002: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270/E870 HSDPA/HSUPA Modem

  Read the article

• Display resolution problem with Sony TV and Intel integrated graphics

  - by user96195

  I am trying to set the correct display resolution for my Sony TV (KDL-32V2000, native resolution 1366x768) connected via HDMI to my HTPC running Ubuntu 12.04. I have a Intel Core i3-530 and Intel mobo (DH57JG), so no proprietary graphics drivers. The problem is that I can't get the correct resolution to display on the TV. Initially I only had 1024x768 (or similar) as a maximum resolution, which was not displayed properly. I tried a few steps, including generating an xorg.conf (initially didn't have one) and adding the segment as described in this post regarding this particular TV. I couldn't get this to work, and at this stage have reverted to running without an xorg.conf. Another post suggested upgrading to kernel 3.5, which did give me a 1920x1080 resolution option. This results in the TV cutting off a fair bit of the edges of the screen. My Dell laptop with ATI drivers recognises the TV screen and works well via HDMI. Any idea how to proceed?

  Read the article

• Ethernet card not detected on Ubuntu Server 12.04

  - by Dana

  My onboard ethernet isn't detected after a re-install of Server 12.04. For reasons I won't get into here, I had to put the server's drive into another machine to install Ubuntu, then swap back into the server. So the server starts up fine, except for the "Waiting for network configuration". I read in another article that Server, by default, doesn't handle new mac addresses for hardware changes dynamically, unlike Ubuntu Desktop, but a look at /etc/udev/rules.d/70-persistent-net.rules shows only one ethernet interface. Shouldn't it show both the old, and the new? lspci -vv shows an ethernet interface, so what the heck is going on? I should mention that the onboard LAN is enabled in the BIOS. And I know this isn't important, but all this started when I changed some network configuration settings in webmin before the re-install. It couldn't download any updates, so I tinkered a little. Broke, it, installed FreeNAS, which worked, but I didn't like it, then went back to Ubuntu Server, and now I'm in this pickle. Thanks for any advice!

  Read the article

• How do I enable sound with the "linux-virtual" kernel?

  - by Ola Tuvesson

  I've been trying to enable sound for the linux-virtual kernel as I want to run an ultra slim Ubuntu server under VirtualBox but need audio. The resource usage difference between virtual and generic/server is surprisingly large, with the virtual kernel system using 80Mb less RAM after a clean boot (130Mb vs 210Mb), and I really want to squeeze every clock cycle and available byte I can out of the system. Besides, the virtual kernel has some additional optimisations enabled specifically for virtual machines (or so I am told). Now I have compiled my own kernel a few times in the past, for example to include the Intel-PHC module (for improved power management on Thinkpads), so the concept is not entirely alien to me, but I've run into a strange problem which I'm hoping someone can help explain: When I do a diff between the config files for Linux-generic and Linux-virtual there are precious few differences, and certainly none which pertain to sound support; there are really only five or six lines which differ, and they're mainly to do with i/o timing, sleep state and priorities. What gives? I expected the differences to be extensive, and that I would be able to identify the options that enabled audio by looking at them, but my problem doesn't seem to be related to the config file at all (yes, I know about the sound drivers section - it is identical between the two kernel configs). Am I looking in the wrong place? Many thanks!

  Read the article

• How to connect to DSL modem using PPPoE?

  - by VJo

  Hello, I am connecting to the internet through a pppoe connection, but for some reason I can not connect to my modem (it's address is 192.168.1.1). Before I set my pppoe connection, I could connect. So, is there a way? EDIT The output of ifconfig is : r@PlaviZec:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:13:d4:f7:02:d4 inet6 addr: fe80::213:d4ff:fef7:2d4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2811 errors:0 dropped:0 overruns:0 frame:0 TX packets:2801 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2538831 (2.5 MB) TX bytes:448591 (448.5 KB) Interrupt:21 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:28 errors:0 dropped:0 overruns:0 frame:0 TX packets:28 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1600 (1.6 KB) TX bytes:1600 (1.6 KB) ppp0 Link encap:Point-to-Point Protocol inet addr:92.229.42.177 P-t-P:213.191.64.59 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:2794 errors:0 dropped:0 overruns:0 frame:0 TX packets:2741 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:2476277 (2.4 MB) TX bytes:381240 (381.2 KB)

  Read the article

• Can't install Apache 2.2.22 on Ubuntu 13.10

  - by B18C1

  My work environment requires Apache 2.2.22 instead of the latest version of 2.4. My machine is currently running Ubuntu 13.10. When I use Synaptic or apt-get it will not allow me to choose an older version of Apache than 2.4. So my question is, how can I force an install of Apache 2.2.22 on Ubuntu 13.10 using Synaptic or apt-get. When I do try to specify the version I get the following: sudo apt-get install apache2=2.2.22-1ubuntu1 [sudo] password for b18c1: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: apache2 : Depends: apache2-mpm-worker (= 2.2.22-1ubuntu1) but it is not going to installed or apache2-mpm-prefork (= 2.2.22-1ubuntu1) but it is not going to be installed or apache2-mpm-event (= 2.2.22-1ubuntu1) but it is not going to be installed or apache2-mpm-itk (= 2.2.22-1ubuntu1) but it is not going to be installed Depends: apache2.2-common (= 2.2.22-1ubuntu1) but it is not going to be installed E: Unable to correct problems, you have held broken packages.

  Read the article

• lucid 10.04 LTS => Precise 12.04.1 : upgrade doesn't work

  - by Rastom

  I googled and looked into all unkown issues on ubuntu forums but I can't figure out why a 10.04 LTS server won't detect the last LTS 12.04.1. I guess since 12.04 is a fresh dist, not much is reported for related issues Here is what I did : apt-get update apt-get upgrade apt-get install update-manager-core it was already installed so no update for this package. I checked : /etc/update-manager/release-upgrades [DEFAULT] # Default prompting behavior, valid options: # # never - Never check for a new release. # normal - Check to see if a new release is available. If more than one new # release is found, the release upgrader will attempt to upgrade to # the release that immediately succeeds the currently-running # release. # lts - Check to see if a new LTS release is available. The upgrader # will attempt to upgrade to the first LTS release available after # the currently-running one. Note that this option should not be # used if the currently-running release is not itself an LTS # release, since in that case the upgrader won't be able to # determine if a newer release is available. Prompt=lts I also checked my sourcelist before running apt-get : /etc/apt/sources.list deb http://archive.ubuntu.com/ubuntu/ lucid main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ lucid-security main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu/ lucid-updates main restricted universe multiverse deb http://security.ubuntu.com/ubuntu lucid-security main restricted deb-src http://security.ubuntu.com/ubuntu lucid-security main restricted deb http://security.ubuntu.com/ubuntu lucid-security universe deb-src http://security.ubuntu.com/ubuntu lucid-security universe deb http://security.ubuntu.com/ubuntu lucid-security multiverse deb-src http://security.ubuntu.com/ubuntu lucid-security multiverse # deb http://landscape.canonical.com/packages/hardy ./ # deb-src http://landscape.canonical.com/packages/hardy ./ and then following Ubuntu guide for Precise upgrade the command below should work : root@xxxxxxxxx:/etc/apt# do-release-upgrade -d Checking for a new ubuntu release No new release found So am I missing something ? The server was accessing outside through a proxy but I grant direct access to this server to avoid any Internet access problem or redirection but no clue... Any help would be appreciated

  Read the article

• How can I find installed web applications?

  - by Jo-Erlend Schinstad

  I've installed LAMP Server using tasksel. I've installed phpMyAdmin, which I know from experience gets in /phpmyadmin. That works. Then I installed drupal6. I assumed that it would get in /drupal, but that's not the case. How can I find that kind of information? Of course, in this case, I'm looking for my Drupal install, but I would like to avoid having to spend so much time every time I install a web application, so I'm looking for a generic way.

  Read the article

• Django 1.4 dependency when packaging a Precise application

  - by Caustic

  I am trying to package a program I wrote that depends on Django 1.4.1 in Ubuntu 12.04. As Django 1.4.1 isn't available in Precise I am wondering if it is best to: Package up Django 1.4.1 and drop it in my ppa OR write a script that wgets Django at build time and installs. OR Something better that I haven't thought of. I am still inexperienced with packaging and would appreciate some advice Thanks

  Read the article

• snmpd agent sends duplicate traps

  - by jsnmp

  I am on Ubuntu 10.04.4 LTS, and I cannot upgrade to a higher version. I have installed the snmpd agent (NET-SNMP version 5.4.2.1) with an apt-get install snmpd command. When an event occurs which sends a trap, two traps are sent for each such event instead of one. For example, when I shut down the agent with command /etc/init.d/snmpd stop, two shutdown traps are sent to the destination host. If I then start back up the agent with command /etc/init.d/snmpd start, then two cold start traps are sent to the destination host. Is this a known issue? Is there a fix for this, or is there a configuration change that is needed to prevent the sending of the duplicate trap? These are the contents of the /etc/snmp/snmpd.conf file: rocommunity public authtrapenable 1 trap2sink <trap destination hostname> public These are the contents of the /etc/default/snmpd file: # This file controls the activity of snmpd and snmptrapd # MIB directories. /usr/share/snmp/mibs is the default, but # including it here avoids some strange problems. export MIBDIRS=/usr/share/snmp/mibs # snmpd control (yes means start daemon). SNMPDRUN=yes # snmpd options (use syslog, close stdin/out/err). SNMPDOPTS='-Ls3d -Lf /dev/null -u snmp -p /var/run/snmpd.pid -c /etc/snmp/snmpd.conf' # snmptrapd control (yes means start daemon). As of net-snmp version # 5.0, master agentx support must be enabled in snmpd before snmptrapd # can be run. See snmpd.conf(5) for how to do this. TRAPDRUN=no # snmptrapd options (use syslog). TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid' # create symlink on Debian legacy location to official RFC path SNMPDCOMPAT=yes

  Read the article

• Pen drive cannot be mounted

  - by DUKE

  I get the following message when I insert my pen drive to USB port. I am unable to format it as well. (This pen drive earlier used as a bootable drive for Ubuntu 12.04) I am using Ubuntu 12.04 LTS. lsusb command in the terminal gives the following message: siva@siva:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 002 Device 002: ID 0424:2513 Standard Microsystems Corp. Bus 001 Device 003: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 001 Device 004: ID 1c4f:0002 SiGma Micro Keyboard TRACER Gamma Ivory Bus 002 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in] Bus 002 Device 004: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 001 Device 007: ID 05ac:8281 Apple, Inc. Bus 001 Device 008: ID 0951:1653 Kingston Technology

  Read the article

• Installing a downgraded version of Firefox 16 from PPA

  - by Mikko Ohtamaa

  I'd like to fetch and install old FF16 instead of FF17 on Ubuntu 10.04 LTS server. Currently FF17 is default. FF17 is incompatible with Selenium 2.26 http://stackoverflow.com/questions/13600247/unable-to-run-selenium-suite-on-firefox-17 How one can install an old version of Firefox with apt-get? Can one pindown this version so that it is not automatically updated? Also if there exists a static FF16 installation available it is a solution. apt-cache policy firefox firefox: Installed: 17.0.1+build1-0ubuntu0.10.04.1 Candidate: 17.0.1+build1-0ubuntu0.10.04.1 Version table: *** 17.0.1+build1-0ubuntu0.10.04.1 0 500 http://dk.archive.ubuntu.com/ubuntu/ lucid-updates/main Packages 500 http://security.ubuntu.com/ubuntu/ lucid-security/main Packages 100 /var/lib/dpkg/status 3.6.3+nobinonly-0ubuntu4 0 500 http://dk.archive.ubuntu.com/ubuntu/ lucid/main Packages

  Read the article

• My mouse pointer disappears on "system surfaces" , like background picture, menus, background for all kind of system menus

  - by Siegfried

  I have an annoying problem with Ubuntu 11.10, my mouse pointer disappears on the Ubuntu surface ( not in programs like firefox, libre office ..) The mouse pointer is there, but its size is only one pixel and in the white background of e.g. "system" it is not seen at all, although with "ctrl" I can see where it should be. I have not found any place where I can change the size or colors of the mouse pointer. Can anybody help me?

  Read the article

• looking for a clock widget that is unaffected by the mouse

  - by Joshua Robison

  Between screenlets, cairo-dock widgets and plasma-widgets. One of them's gotta have this function; A widget that hovers above everything on the desktop but is completely unaffected by the mouse. I would use this by making a clock hover above everything and semi transparent. I also want to be able to click on windows underneath the clock. After some experimentation, the screenlets widgets do not do what I am asking. I can make them float above everything on the screen but I am not able to click on windows underneath them. I need the widget to be COMPLETELY unaffected by the mouse.

  Read the article

• Problem installing Ubuntu One in Windows XP

  - by Garry

  I've just had to reinstall my Ubuntu One client for Windows XP Service Pack 3 and whenever I do it uninstalls my previous attempt then comed up with the following error message c:\Program Files/ubuntuone\dist\ubuntuone-control-panel-qt.exe This application has failed to start because the application configuration is incorrect. Reinstalling this application may fix this problem. The only option I have is "ok" then nothing happens. I've tried downloading Ubuntu One several times and tried Windows 2000 compatibility mode, Administrator mode and nothing. The only thing that I make happen is for Windows NT 5 mode, a small box appears with nothing showing and nothing else. I really need Ubuntu 1 on my computer as it has everything on it so I'm wondering if I can do anything to make it install or if it's a lost cause. The last time I tried to install U1 on Windows XP I had the same problem but after about 10 tries it installed. I've tried about 30 times now and nothing. My computer is a Dell OptiPlex SX280 with 2gb ram and 340GB Hard disk Intel Pentium 4 HT Processor

  Read the article

• How to efficiently preserve a really big navigation history in Firefox?

  - by brandizzi

  When I was using Mac, my Firefox stored items in its history for really long times. Sometimes I needed to find a link to a site I have seen two years ago and it found it! Also, the autocomplete in the Firefox bar is really great, so a long history and the autocompleting yield a wonderful feature to me. Unfortunately, it seems this does not happen in Ubuntu's Firefox. I looked for solutions but I just got some Firefox developers saying the option of expanding history is out for performance issues and one is well advised to not try to change it (which read to me as saying "we cannot make it work well so we limit the scope"). Anyway, my question is: is there a way of efficiently expand the size of Firefox history? Sorry for my bitterness, but a solution with strings attached (mostly say that I should not do it, like this addon) is not solution for me. Does someone have the same need of mine and found a solution?

  Read the article

• Ubuntu Slows down over time?

  - by Lucas McCoy

  About a few months ago I was using Ubuntu (doing something in the command line) when it started lagging really bad. I would hit S (or any other key) and like 20 seconds later it would show up in my terminal. Naturally I killed the machine and rebooted. The system started working just fine, but about 30 minutes later it did the same thing. Now I'm forced to use Ubuntu in 30 minute spurts. I've looked at my running processes and none of them are taking large amounts of CPU or RAM. Luckily I've dual-booted so I could still use my machine. Now I need to get this fixed and I'm wondering what my options are. Will I be forced to do a fresh install or is there another way?

  Read the article

• Is there an RSS feed of Ubuntu Release torrent files

  - by Valorin

  A lot of torrent search engines have the ability to provide an RSS feed of matches, allowing you to set up torrent programs to download items which are published on the feed. This is useful for watching releases of things. The problem with doing this through a random search engine for Ubuntu is that you usually get too many torrents as it picks up different custom versions, and other software with the name in the title/description. See: http://www.mininova.org/rss/ubuntu So I was wondering if there was an RSS feed somewhere that only loads up the official torrent files for releases?

  Read the article

• Screen lock broken when using separate x screens

  - by Wolf

  For some reason, the screen lock appears to be broken when I use separate x screens (it works fine if I use twin view or just one monitor, though). If I wait for the screen to lock (or if I tell it to lock), it fades to black, showing only the mouse cursor. However, when I move the mouse to bring up the password prompt, nothing happens, the screens remain completely blank. Furthermore, it would appear that the screen lock never activated in the first place, for two reasons: one, if I blindly enter my password and press enter, nothing happens; and two, if I press ctrl+alt+delete and then enter it logs me out (which shouldn't happen if the password prompt is there, right), losing any progress I have on any of the open programs (meaning, not a very friendly option for a programmer ;) ). So yeah, does anyone know why this is happening, and how to fix it? Thanks! Notes: I am using Ubuntu 11.10 64 bit. I am using gnome-classic, but the same problem occurs when I use unity. I do not have xscreensaver, nor do I have any screen savers running (except, I guess for the default blank one).

  Read the article

• Layouts in HTML

  - by TerNovi

  I am trying to have a div then inside the division have some different places where I can place stuff. For example. <div blah> <table blah> content... </table> <table blah> content... </table> <table blah> content.... </table> </div> I am not really a web developer so I know this question might seem simple but any help is greatly appreciated. Oh and I am using Macromedia Dreamweaver 8. Thanks.

  Read the article

• Wireless not detected on an hp Pavilion g6 - RT5390PCIe

  - by Earl Larson

  I just bought an HP Pavilion g6 laptop and I installed Natty Narwhal alongside Windows 7. In Windows 7, my WiFi works perfect but in Ubuntu it absolutely (no matter what I do) won't detect my home WiFi network. Here is the output of "lspci": earl@ubuntu:~$ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) 00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42) 00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller (rev 40) 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40) 00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40) 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40) 00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller 00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200] 01:05.1 Audio device: ATI Technologies Inc RS880 Audio Device [Radeon HD 4200] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05) 03:00.0 Network controller: Ralink corp. Device 5390 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5209 (rev 01) earl@ubuntu:~$

  Read the article

• 12.04 Epson Scanner will not install dependency not met

  - by Howard Graham

  I'm trying to install Epson V100 scanner in 12.04. I downloaded files from Epson: iscan_2.29.1-5~usb0.1.ltdl7_amd64.deb iscan_2.29.1-5~usb0.1.ltdl3_amd64.deb iscan-plugin-gt-s600_2.1.2-1_amd64.deb from Ubuntu Software Center via double click on the file or from the terminal "dependencies not met" error occurs. What can I do. Apparently 12.04 is not able to process these files. Does anyone know where I can download older versions of the above files. I can not access avasys.jp from my location in China.

  Read the article

• My software center asks me to repair but says it cant repair due to an error

  - by Stevo

  This is the error installArchives() failed: dpkg: dependency problems prevent configuration of libmtp-dev: libmtp-dev depends on libmtp8 (= 1.0.2-1ubuntu1); however: Package libmtp8 is not installed. dpkg: error processing libmtp-dev (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: libmtp-dev Error in function: dpkg: dependency problems prevent configuration of libmtp-dev: libmtp-dev depends on libmtp8 (= 1.0.2-1ubuntu1); however: Package libmtp8 is not installed. dpkg: error processing libmtp-dev (--configure): dependency problems - leaving unconfigured

  Read the article

• Install packages with unmet dependencies

  - by Alvin Sim

  Hi all, I am trying to install some applications but some of them fail to install. The three applications I tried are Vim, Emacs and GNOME-Do. I am using Ubuntu 10.10 installed as a guest OS in VirtualBox. The kernel version installed is 2.6.35-26. The error I got is : alvinsim@ubuntu:/etc/apt$ sudo apt-get install emacs Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: emacs : Depends: emacs23 or emacs23-lucid but it is not going to be installed emacs23-nox but it is not going to be installed E: Broken packages What is wrong and how do I fix this? Thanks.

  Read the article

• Media Streaming Server

  - by Ehsan

  I'm looking for a media stream server (specially audio streams) for installing on my Ubuntu server box. Is there any lightweight, easy configurable solution? It's awesome if this solution is able to install on a high bandwidth server and gets a stream from a low bandwidth server and serves it for many clients. (simply because the original server hasn't enough BW to serve media for many clients) (My server is a LAMP server, but I'm looking for a good solution for one of my clients to stream his audio for one hour every week)

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >