Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 157/676 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• How do I turn a shared computer back into a shared media drive?

  - by Brian Green

  There is an external hard drive that is set up as a shared media device for a TV. I tried to hook up my the library on my desktop as a shared media drive to watch movies from my computer on the TV. It worked for a little bit but about 5 seconds after getting into my computer the tv went blank and I couldn't access the external hard drive any more. When I checked on my computer the Hard drive was no longer a shared media device but now it was a computer on the network. How do I fix this and turn it back into a shared media device so I can access it on the TV?

  Read the article

• Sync Music to External Hard Drive with Windows Media Player

  - by dtbarne

  I'd like to sync my music from my internal hard drive to an external hard drive. Windows Media Player doesn't recognize my USB external hard drive as a syncable device. If I plug in any USB flash drive, it shows up as a device, but I can't seem to get it to recognize my external hard drive. Per some googling suggestions, the only suggestion I came across was to try enabling the "Portable Device Enumerator" service, but that yielded no luck. Is there any way to sync my music from WMP to an external hard drive?

  Read the article

• Belkin Wireless G router not working on Windows 7

  - by coore

  I have a Belkin F5D7230-4 Wireless G router which used to work on XP. I have a clean Windows 7 install (on the same desktop PC), and it just won't work. Device Manager lists the adapter as a USB device, but it says "The drivers for this device are not installed", even though the driver installer said the installation was OK. Manage Wiresless Networks says "wireless is not currently enabled". The WLAN AutoConfig service is running. My specific question is which of the two symptoms above should I go for first? Should I try to fix the driver installation somehow, or should I try to enable wireless? Is one caused by the other, or is this two independent problems? Any other thoughs that could help me are also appreciated.

  Read the article

• Where does the temporary flash file get stored when I am viweing from Firefox

  - by Nishant

  I am watching a lecture and it seems to be adobe flash ...I wanna save this video that I am viewing . The website I am checking is http://cs75.tv/2009/fall/ . I am using Firefox . Dont know if this info helps , but .... My about:cache result is this . Memory cache device Number of entries: 212 Maximum storage size: 13312 KiB Storage in use: 8087 KiB Inactive storage: 6819 KiB List Cache Entries Disk cache device Number of entries: 3224 Maximum storage size: 500000 KiB Storage in use: 26066 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\Cache List Cache Entries Offline cache device Number of entries: 0 Maximum storage size: 512000 KiB Storage in use: 0 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\OfflineCache List Cache Entries

  Read the article

• Where does the temporary flash file get stored when I am viweing from Firefox

  - by Nishant

  I am watching a lecture and it seems to be adobe flash ...I wanna save this video that I am viewing . The website I am checking is http://cs75.tv/2009/fall/ . I am using Firefox . Dont know if this info helps , but .... My about:cache result is this . Memory cache device Number of entries: 212 Maximum storage size: 13312 KiB Storage in use: 8087 KiB Inactive storage: 6819 KiB List Cache Entries Disk cache device Number of entries: 3224 Maximum storage size: 500000 KiB Storage in use: 26066 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\Cache List Cache Entries Offline cache device Number of entries: 0 Maximum storage size: 512000 KiB Storage in use: 0 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\OfflineCache List Cache Entries

  Read the article

• Where does the temporary flash file get stored when I am viweing from Firefox

  - by Nishant

  I am watching a lecture and it seems to be adobe flash ...I wanna save this video that I am viewing . The website I am checking is http://cs75.tv/2009/fall/ . I am using Firefox . Dont know if this info helps , but .... My about:cache result is this . Memory cache device Number of entries: 212 Maximum storage size: 13312 KiB Storage in use: 8087 KiB Inactive storage: 6819 KiB List Cache Entries Disk cache device Number of entries: 3224 Maximum storage size: 500000 KiB Storage in use: 26066 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\Cache List Cache Entries Offline cache device Number of entries: 0 Maximum storage size: 512000 KiB Storage in use: 0 KiB Cache Directory: C:\Documents and Settings\nvarm\Local Settings\Application Data\Mozilla\Firefox\Profiles\d74svniy.default\OfflineCache List Cache Entries

  Read the article

• Windows 7 unload driver/disconnect usb before restart

  - by brux

  In xp, my Tascam US 122 usb audio interface works fine. On my windows 7 computer the device works, however when i restart/shutdown it hangs at the "shutting down" screen forever. If the usb cable is removed prior to initiating restart/shutdown then everything goes fine, the computer restarts as normal. This is a known problem, running any other driver in compatibility mode doesnt fix the problem. Is there a method I can use to unload the device/drivers so that I dont have to reach round physically and disconnect the cable. Somebody suggested a spdt switch on the cable itself, but I am looking for a simpler method. Surely I can automate the unloading of the device through a script or such? Any ideas are greatly welcomed thanks

  Read the article

• Dell Multi-Monitor Hub: true DisplayPort splitting?

  - by thepurplepixel

  In my search for a new display, I came across the Dell Multi-Monitor Hub MMH11, which seemed to be an alternative to my search for daisy-chainable DisplayPort displays. However, before I cave and spend $179 on this device, I am wondering if this will be similar to other splitting devices where it appears to the computer as one big monitor and the device does the splitting (which I don't want). Or, does this use the packet-based nature of DisplayPort to present two/three separate displays to the computer? Also, would this device work on my MacBook Pro? (I know the Dell site says it's for Windows, but it also says that no driver installation is required. I'd assume since the MBP supports DP 1.2 it would work, but it's better to ask). Thanks!

  Read the article

• Pygrub with DRBD on Xen 3.2

  - by Joril

  Hi all, we have a two-node cluster using DRBD 8.2 on CentOS 5.2 64bit. The cluster runs a few VMs on top of Xen 3.2.1, here's the configuration for an Ubuntu Jaunty VM: name = 'dev' bootloader = '/usr/bin/pygrub' memory = '512' vif = [ 'ip=192.168.1.217,mac=00:16:3E:CD:60:80' ] disk = [ 'phy:/dev/drbd24,xvda1,w', 'phy:/dev/drbd25,xvda2,w' ] As you can see, the disks are specified like "phy:", and as such pygrub doesn't know a thing about the underlying drbd device... So my problem is that even though the VM boots just fine, it doesn't handle the state of the drbd device. As a result, when for some reason the device gets to a secondary/secondary state, the VM won't boot, and I have to manually specify which node is primary. I read that starting with Xen 3.3 pygrub understands the "drbd:" specification, and I think that it would fix my problem, but I can't upgrade Xen at the moment... Is there a workaround? For example, could I use the 3.3 version of pygrub? Thanks!

  Read the article

• NFS share access - Permission denied

  - by rgngl

  I'm trying to share a directory on my NAS device(WD Mybook WE) with NFS to another machine on my local network. The directory on the NAS device looks like this: drwxr-x--- 15 git git 4096 Nov 17 01:05 git/ And id's of the user git on the NAS device is like this: [root@myhost DataVolume]# id git uid=505(git) gid=505(git) I played with many different parameters in the /etc/exports file and this is what I got there currently: /DataVolume/git 192.168.0.20(async,rw,no_root_squash,no_subtree_check) On the client side I have the user git and group git with the same id's to match the ones on the server. user@myclient:~$ id git uid=505(git) gid=505(git) groups=505(git) I mount the directory with: sudo mount myhost:/DataVolume/git -t nfs git/ and the mounted directory looks like: drwxr-x--- 15 git git 4096 Nov 17 01:05 git After these steps I can't seem to cd to that directory with any user, including git and root. I am getting a Permission denied error. Thanks in advance for any help.

  Read the article

• Why can't I reconnect to my Philips SHB9000 bluetooth headset?

  - by Thomas Eyde

  When I connected my Philips SHB9000 bluetooth to my Windows 7 (64 bit) for the very first time, it worked well. I had to manually change the default playback device, but otherwise it worked. Then, when I start up my computer from standby, it's nearly random when I can reconnect or not. My last option is to remove the bluetooth device and reconnect it. But now, even that doesn't work. The sad thing is, this used to work better on Windows 7 beta. Windows Update has a new driver which fails to install. Searching for this driver yields nothing. I thought all vendors had an official site for their drivers? Well, Philips seems to have none. If there is no answer to this problem, my advice is to NOT buy this headset. It's good looking, the sound is nice, but what need do we have from that if we can't use the bloody device?

  Read the article

• modprobe ndiswrapper - not found

  - by David

  I'm trying to use ndiswrapper on a Slackware 12 (I think) box, but I'm running into a problem with modprobe. Everything I find online says that it should be working, but for some unknown reason it isn't. Here's what I've done so far: Installed ndiswrapper (latest tarball, make, make install) Ran ndiswrapper -i on the WinXP driver for my USB wireless card Ran ndiswrapper -l which tells me the driver is present and the device is present (lsusb also confirms the device is present) Ran ndiswrapper -m which put an alias for wlan0 in /etc/modprobe.d/ndiswrapper.conf Ran depmod -a Ran modprobe ndiswrapper which tells me "FATAL: module ndiswrapper not found" Ran modprobe -l which shows no listing for ndiswrapper I even tossed in a reboot or two while trying various combinations of the above, still nothing. So naturally ifconfig wlan0 up isn't working because the device isn't being created, presumably because the module isn't loading the driver. Does anybody have any suggestions? Everything points to the notion that this should work fine, but modprobe just isn't able to find what it needs. Have I missed an important step?

  Read the article

• SCSI driver installation trouble

  - by Vicky

  I tried to install the driver of Adaptec 39320A-Ultra 320 SCSI card in Win2003 Server R2 SP2 in a DELL PowerEdge 2950 Server. I selected the driver from the list of drivers present in windows. But it says that the device could not be started(Code 10). I tried to put the card in a system that already had the driver installed. It worked fine. So there is no problem with the hardware. I even tried downloading the driver from the manufacturer website. When I try to select install from path and install that driver, it tell no matching driver found. When I install the default driver from windows, it shows the card in SCSI group of device manager, but with an ! symbol. Also the device ID in driver details was different from that of the one present in other system where it insalled fine. Any suggessions to solve it?

  Read the article

• Seeking a solution to automatically copy files from the cd-rom disk to the USB drive once it's connected.

  - by Ray Nathan

  I plan to distribute a free CD that automatically copies files to a connected usb device. This process will be done on the computers of the users that obtain the cd. The CD will contain an autorun.ini file that will instruct the computer to copy a set of files located on the cd..to a specific directory on the connected usb device. The usb drive letter is not the same on all the systems, therefore...Windows XP should automatically know the drive letter of the usb device before the copy operation begins. What would be the best way of creating a short batch file or script that I can place on the CD to execute this process? Also, please note that it is NOT feasible or recommended to include a batch file on the USB devices to sync this operation due to the explanation at the beginning of this paragraph. :) Thank You All

  Read the article

• USB AutoRun Dialog: Open a webpage option not shown in dialog

  - by Jake M

  I am attempting to make our webpage open when someone plugs in our USB device. My Problem: When we plug in the USB device the autorun dialog appears but there is never an option to open/run the webpage we have specified. See below pic of the dialog we see. Isn't there meant to be an option that says something like "Open in Internet Explorer" or etc.? What we are hoping to achieve is to have another option below 'Use this drive for backup' that says something like 'Open in Web Browser' or something that will ultimately open our webpage when the users decides to. Heres our code that is inside the file autorun.inf which is placed on the USB device: [autorun] shellexecute=http://exds-test.epicservices.com.au/V10InstallationInfo.aspx action=Open Website label=EXDS USB Drive

  Read the article

• What does dd conv=sync,noerror do?

  - by dding

  So what is the case when adding conv=sync,noerror makes a difference when backing up an entire hard disk onto an image file? Is conv=sync,noerror a requirement when doing forensic stuff? If so, why is it the case with reference to linux fedora? Edit: OK, so if I do dd without conv=sync,noerror, and dd encounters read error when reading the block (let's size 100M), does dd just skip 100M block and reads the next block without writing something (dd conv=sync,noerror writes zeros to 100M of output - so what about this case?)? And if is hash of original hard disk and output file different if done without conv=sync,noerror? Or is this only when read error occurred?

  Read the article

• What about IPv4 class E?

  - by Luc

  IPv4's class E network (240.0.0.0/4) contains 268 million addresses. Despite the advertisements for IPv6, claiming we have ran out of address space, this block ironically still claims to be "Reserved for future use". Why hasn't this block been freed up yet? Of course, IPv6 should be promoted instead of freeing up more IPv4 addresses, but we've seen the address shortage coming for years. There has even been a time they weren't sure there was enough time to develop IPv6 before we would run out of addresses. Why didn't they free up this block already? And is there any chance these addresses will be used in the future, like when IPv6 is fairly widely implemented but we still need IPv4 for backwards compatibility? It will be phased out regardless, but then ISPs don't have to employ NAT for IPv4 compatibility.

  Read the article

• Restart my graphics card without rebooting?

  - by defaye

  Wondered if it is possible to use DevCon to restart a display device as a stop-gap solution to artifacts left over from a graphics card malfunction? In particular it leaves my cursor very un-user-friendly: I found out the hardware ID of my display adapter through device manager (below) [(windows key + pause break) - device manager - display adapters - right click your display adapter - properties - details - hardware ids.] I tried the commands (opened with admin privileges) devcon restart "PCI\VEN_1002" and devcon restart =display but it always come back with No devices restarted.. Is it even possible to restart the graphics card without a system reboot?

  Read the article

• Vantec NexStar NAS Encloser - Writing large files

  - by peter

  I have one of these 'Vantec NexStar LX - NST-475LX-BK' drive enclosures. It is a NAS device. When I write a file to the device using eSata, or a SMB share I cannot write files over 4GB. I think this is because the drive is formatted with FAT32. But when I access the device using FTP it doesn't matter. I can write files of any size. E.g. I wrote one on there last night which was 30GB. Does this make any sense? Why? I guess the most important thing for me is data integrity.

  Read the article

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• How can you configure the uPnP server on windows home server?

  - by pschorf

  I'm currently helping my parents with their home network set up while I'm home. I have a Synology NAS device which supports a uPnP server. I have a few MPEG-4 movies stored on the box, and simply enabling the uPnP server on the NAS streamed the video to some devices they have, including their Xbox 360 and Samsung television. They have a windows home server (HP MediaSmart.) I put one of the movies in the "Videos" folder of the device, and enabled sharing. It shows up on the television, but when played it produces an "unsupported file type" error. I have all of the transcoding settings disabled on the Synology device, so it should be streaming the same file. Is there some additional configuration I need to perform on the home server unit?

  Read the article

• is there such a thing as a ip femtocell, and what does it do?

  - by The Journeyman geek

  My dad mentioned a co-worker suggested using a device, that might use cdma to route calls through IP to save costs on a certain overseas project we're on- since our home base is quite far from there. I've never heard of such a device, so if it does, i'm wondering, if its specific to particular ISPs, or if you can just pick one off the shelf, plug it into an arbitraty internet connection, and make calls using it and a cellphone of some sort? As you can tell, details are sketchy, so... if such a device dosen't exist, saying so might be a right answer ;)

  Read the article

• Comunication from Server to Client + Client LAN

  - by Filipe YaBa Polido

  I'm having some trouble with some network setup. I've tried OpenVPN, SocialVPN, Hamachi, still it is not working. This is my setup: Server A: NIC 1 with internet public address, NIC 2 to LAN Client B PC: NIC 1 (192.168.10.2) connects to router 192.168.10.1 Client B Device: 192.168.10.3 (Configured via software, can't do much here) Problem: Server A must connect to cliente device B. (I can install software needed at Client B PC). However... I can't change the router to some model with VPN like Draytek or Cisco :( OpenVPN fails at bridging, PC B can ping Server A, but Server A can't ping Device B, only PC B. What else can I do?!?!?

  Read the article

• Can I replace a router and DHCP server without disrupting traffic?

  - by SRobertJames

  I have a device which acts as a router and DHCP server. I'm replacing it, and would like to minimize down time. If I unplug it, and plug in a different device with the same IP, will all the PCs with DHCP leases keep on working? (I have DHCP Conflict detect on, so it shouldn't reassign a DHCP address already used). What if I want to change the IP (new subnet) - is there anyway to tell all the clients (Windows PCs) to release their DHCP leases and request new ones in a minute? If before unplugging the old device, I have it release all DHCP leases, will the Windows PCs automatically ask for new DHCP addresses?

  Read the article

• Network monitoring library, or objects, for a cloud

  - by Andrew Smith

  I am looking for library to support server / switch monitoring, to actually be able to check with the device if it's working OK. However this requires some sort of auto-detection and device support. Basically I need to automatically detect a new device, start monitoring it like CPU and PING. So how do I auto-detect the machine remotely, this is something I need library for. Rackspace has something like this - "Cloud Monitoring API". But is there anything opensource which can be used same way? The Nagios and others doesnt have such API, and the big and expensive systems are too big to handle in public cloud, so there must be some other network monitoring engine with API, which can add a new servers automatically and support user isolation for example so I dont see other servers except mine.

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >