Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 153/676 | < Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >

• NVidia TwinView - slow rendering on dual desktop [closed]

  - by lisak

  Hey, does anybody have experience with it ? I've set it up 4 times on 4 different machines. And there was always problems with slow rendering ( for instance : scrolling pages in browser is not fluent). But there always was something that finally made it work perfectly... I remember that one time this option helped, but not now Option "RenderAccel" "1" Nvidia geforce 8400GS or Zotac geforce 9500GT Monitors connected via dvi and hdmi connectors proper nvidia driver installed Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "0" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/cyrillic" EndSection Section "Module" Load "dri2" Load "glx" Load "extmod" Load "record" Load "dbe" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Acer AL1715" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Device" Identifier "Nvidia" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "MSI big bang-fuzion" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "RenderAccel" "1" Option "AllowGLXWithComposite" "1" Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1280x1024 +1920+0, DFP: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• grub refuses to install to raid array

  - by ronno

  I have a software raid 0 setup with dual booting Windows 7 and Ubuntu 12.04. The GRUB bootloader that is already on the hard drive seems to work fine. However, since the latest package update for grub, it refuses to install the new version to the hard disk. grub-install throws the following error: /usr/sbin/grub-probe: error: cannot find a GRUB drive for /dev/mapper/< raid name_RAID0p9. Check your device.map. Auto-detection of a filesystem of /dev/mapper/< raid name_RAID0p9 failed. Try with --recheck. If the problem persists please report this together with the output of "/usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs -v /boot/grub" to < [email protected] update-grub pops the same "/usr/sbin/grub-probe: error: cannot find a GRUB drive for /dev/mapper/< raid name_RAID0p9. Check your device.map." every alternate line. I don't understand what exactly is going on. I'm afraid to reinstall the grub package because it might mess up the boot, which currently works fine. Is it safe to just ignore this?

  Read the article

• Latitude D600 USB port problem

  - by Moab

  Both USB ports stopped communicating on my D600, they have power, my optical mouse still lights up, no device works on the ports, everything is fine in Device manager in Dual boot XP and W7. Checked the bios, not much in there for USB. No usb device shows up when I use the F12 boot device menu either, so it must be some hardware issue. I have another hard drive with Ubuntu on it, popped it in and USB does not communicate with it either. Appears to have 5v but no communication, any Ideas besides another motherboard or USB card for the pcmcia slot (these don't work to well from my research)? I mostly use them for mass storage devices and pcmcia slots don't supply enough power for these devices. Thanks to all who answer with last ditch efforts. I hate to give up on it, its been good to me and still runs rather well for its vintage. EDIT: I did inspect the ports with a flashlight and did a partial disassembly of the laptop in an attempt to check the solder joints, but would require complete motherboard removal to see them, that is where I stopped. .

  Read the article

• Laptop Synaptics Touchpad No Longer Functional After Windows 7 Upgrade

  - by Chance

  I have a Toshiba laptop, with an integral Synaptics (PS/2 port) touch pad, that I bought pre-installed with 32-bit Windows Vista. After doing a clean install of 32-bit Windows 7, I can no longer get the touch pad to respond. The function (FN) keys on the laptop still operate correctly, but they no longer display on screen when used. I have no way of knowing if the function key to enable / disable the touch pad is working correctly, although the function keys for dim / brighten display, as well as others, work fine. I have removed the device from the device manager and allowed it to reinstall with no success. I have removed the previous drivers and updated them with the current 32-bit Win7 compatible versions from Synaptics website, with no success. The Synaptics icon displays in the taskbar, and the touch pad is available in the Device Manager, both of which say the device is installed and working correctly. I have checked to make sure that the touch pad is enabled in the Synaptics menu, and have tried toggling enabled / disabled with no success. If anyone has any suggestions, or knows where I can find a solution, I would be very appreciative.

  Read the article

• Sound doesn't work anymore after replacing RAM

  - by thejh

  Hello, today, I replaced one old RAM module with two newer, bigger ones, but now, the sound doesn't seem to work anymore. Already ran alsaconf and it didn't help. Output of lspci for the audio device: 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) Subsystem: Giga-byte Technology Device a002 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 21 Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [6c] HyperTransport: MSI Mapping Enable+ Fixed+ Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel The audio device is onboard and has six configurable outputs, two or so are also capable of being an input (if I remember it correctly), but I don't know how to control it under linux. Does somebody know how/whether replacing the RAM could be related to my problem and/or how to fix it?

  Read the article

• Why am I unable to mount my USB drive (unknown partition table)?

  - by Pat

  I'm a real newbie to linux. Anyway the problem is that my USB doesn't get recognized anymore which is really annoying because I need information from it. I've read like a zillion threads how to manually mount it but I really can't it to work. I hope it's just some easy, stupid problem where any of you could help me out quickly.. Here is the syslog: kernel: [ 6872.420125] usb 2-2: new high-speed USB device number 11 using ehci_hcd mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" kernel: [ 6872.556295] scsi8 : usb-storage 2-2:1.0 mtp-probe: bus: 2, device: 11 was not an MTP device kernel: [ 6873.558081] scsi 8:0:0:0: Direct-Access SanDisk Cruzer 8.01 PQ: 0 ANSI: 0 CCS kernel: [ 6873.559964] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 6873.562833] sd 8:0:0:0: [sdc] 15682559 512-byte logical blocks: (8.02 GB/7.47 GiB) kernel: [ 6873.564867] sd 8:0:0:0: [sdc] Write Protect is off kernel: [ 6873.564878] sd 8:0:0:0: [sdc] Mode Sense: 45 00 00 08 kernel: [ 6873.565485] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.565495] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.568377] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.568387] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.574330] sdc: unknown partition table kernel: [ 6873.576853] sd 8:0:0:0: [sdc] No Caching mode page present kernel: [ 6873.576863] sd 8:0:0:0: [sdc] Assuming drive cache: write through kernel: [ 6873.576871] sd 8:0:0:0: [sdc] Attached SCSI removable disk Thanks in advance

  Read the article

• Reread partition table without rebooting?

  - by Teddy

  Sometimes, when resizing or otherwise mucking about with partitions on a disk, cfdisk will say: Wrote partition table, but re-read table failed. Reboot to update table. (This also happens with other partitioning tools, so I'm thinking this is a Linux issue rather than a cfdisk issue.) Why is this, and why does it only happens sometimes, and what can I do to avoid it? Note: Please assume that none of the partitions I am actually editing are opened, mounted or otherwise in use. Update: cfdisk uses ioctl(fd, BLKRRPART, NULL) to tell Linux to reread the partition table. Two of the other tools recommended so far (hdparm -z DEVICE, sfdisk -R DEVICE) does exactly the same thing. The partprobe DEVICE command, on the other hand, seems to use a new ioctl called BLKPG, which might be better; I don't know. (It also falls back on BLKRRPART if BLKPG fails.) BLKPG seems to be a "this partition has changed; here is the new size" operation, and it looked like partprobe called it individually on all the partitions on the device passed, so it should work if the individual partitions are unused. However, I have not had the opportunity to try it.

  Read the article

• Why is there an extra HDD under /dev being added in my Linux Kernel?

  - by user1279156

  I have created a Linux kernel and for some reason an extra drive is always added at bootup. My hard drive is listed as /dev/sdb. /dev/sda is created too, and it is 8 MB in size. I can't find anything in the kernel config that is creating this, but if I use a different kernel it is not there. Kernel logs show it as an attached SCSI device, looks just like my hard drive but only 8 MB, and has no partition table. It also doesn't appear to be a physical device. I've tried the kernel on many different models of PCs and it is always there. Does anyone know how to remove it? /dev/disk/by-id gives me: scsi-1AMCC_U21413034D98EB000584 scsi-1AMCC_U21413034D98EB000584-part1 scsi-353333330000007d0 scsi-SATA_ST3250312AS_5VY7SH42 scsi-SATA_WDC_WD800JD-60L_WD-WMAM9Y085675 scsi-SATA_WDC_WD800JD-60L_WD-WMAM9Y085675-part1 scsi-SATA_WDC_WD800JD-60L_WD-WMAM9Y085675-part2 hdparm -i /dev/sda gives me an "invalid argument". dd if=/dev/sda of=sda.img the resulting file does not have any content sdparm results: /dev/sda: Linux scsi_debug 0004 Device identification VPD page: Addressed logical unit: designator type: T10 vendor identification, code set: ASCII vendor id: Linux vendor specific: scsi_debug 2000 designator type: NAA, code set: Binary 0x53333330000007d0 Target port: designator type: Relative target port, code set: Binary transport: Serial Attached SCSI (SAS) Relative target port: 0x1 designator type: NAA, code set: Binary transport: Serial Attached SCSI (SAS) 0x52222220000007ce designator type: Target port group, code set: Binary transport: Serial Attached SCSI (SAS) Target port group: 0x100 Target device that contains addressed lu: designator type: NAA, code set: Binary transport: Serial Attached SCSI (SAS) 0x52222220000007cd designator type: SCSI name string, code set: UTF-8 transport: Serial Attached SCSI (SAS) SCSI name string: naa.52222220000007CD

  Read the article

• Failed Software RAID0 on Linux - Attempting to recover data

  - by Gizmo_the_Great

  I have a two disk RAID0 software raid (not hardware raid) that is reported to have failed during boot and my OS won't start. Using a Live CD, I get the following output : sudo mdadm -E /dev/sdc1 /dev/sdd1 /dev/sdc1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 1465145328 (698.64 GiB 750.15 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : ad427cd2:9f885f57:7f41015f:90f8f6af Update Time : Sun Jun 8 12:35:11 2014 Checksum : a37407ff - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) /dev/sdd1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 976771056 (465.76 GiB 500.11 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : 2ea0199d:cb08d9e7:0830448a:a1e1e348 Update Time : Sun Jun 8 13:06:19 2014 Checksum : 8883c492 - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) GParted lists both disks, detects the flags as 'Raid' and lists the data usage. Can anyone please help me re-assemble just so that I can copy some of the data off that I have not backed up recently? Thanks

  Read the article

• Hungry hungry BIOS: why do I have less than 4 GiB of memory?

  - by Rhymoid

  I thought I had 4 GiB of memory, but just to be sure, let's ask the BIOS about that: ?: sudo dmidecode --type 20 # dmidecode 2.12 SMBIOS 2.6 present. Handle 0x000B, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000A Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Handle 0x000D, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x000E Partition Row Position: Unknown Interleave Position: Unknown Interleaved Data Depth: Unknown Alright, 4 GiB it is. But I can't use all of it: ?: cat /proc/meminfo | head -n 1 MemTotal: 3913452 kB Somehow, somewhere, I lost 274 MiB. Where did 6% of my memory go? Now I know the address ranges in DMI are incorrect, because the ACPI memory map reports usable ranges well beyond the ending address of the second memory module: ?: dmesg | grep -E "BIOS-e820: .* usable" [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dee7bfff] usable [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable I get pretty much the same info from /proc/iomem (except for the 4 kiB hole 0x000-0xFFF), which also shows that the kernel only accounts for less than 8 MiB. I guess 0x00000000-0x7FFFFFFF is indeed mapped to the first memory module, and 0x80000000-0xDFFFFFFF to part of the second memory module (a bunch of ACPI NVS things live between 0xDEE7C000 and 0xDEF30FFF, and the remaining 16-something MiB of that range are just 'reserved'). I guess the highest 0x18000000 bytes of the second memory module are mapped above the 4 GiB mark. But even then, there are two problems: 128 MiB (0x08000000 bytes, living somewhere between 0xE0000000 and 0xFFFFFFFF) are still completely unaccounted for. To note, my graphics card is on PCI-Express and (allegedly) has 1 GiB dedicated memory, so that shouldn't be the culprit. Did the BIOS screw up in moving the memory, leaving it partially shadowed by MMIO? Even with this mediocre explanation, I only 'found' 128 MiB. But /proc/meminfo is reporting a much larger deficit; where's the other 146 MiB? How does Linux count MemTotal?

  Read the article

• Setting up a pc bluetooth server for android

  - by Del

  Alright, I've been reading a lot of topics the past two or three days and nothing seems to have asked this. I am writing a PC side server for my andriod device, this is for exchanging some information and general debugging. Eventually I will be connecting to a SPP device to control a microcontroller. I have managed, using the following (Android to pc) to connect to rfcomm channel 11 and exchange data between my android device and my pc. Method m = device.getClass().getMethod("createRfcommSocket", new Class[] { int.class }); tmp = (BluetoothSocket) m.invoke(device, Integer.valueOf(11)); I have attempted the createRfcommSocketToServiceRecord(UUID) method, with absolutely no luck. For the PC side, I have been using the C Bluez stack for linux. I have the following code which registers the service and opens a server socket: int main(int argc, char **argv) { struct sockaddr_rc loc_addr = { 0 }, rem_addr = { 0 }; char buf[1024] = { 0 }; char str[1024] = { 0 }; int s, client, bytes_read; sdp_session_t *session; socklen_t opt = sizeof(rem_addr); session = register_service(); s = socket(AF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); loc_addr.rc_family = AF_BLUETOOTH; loc_addr.rc_bdaddr = *BDADDR_ANY; loc_addr.rc_channel = (uint8_t) 11; bind(s, (struct sockaddr *)&loc_addr, sizeof(loc_addr)); listen(s, 1); client = accept(s, (struct sockaddr *)&rem_addr, &opt); ba2str( &rem_addr.rc_bdaddr, buf ); fprintf(stderr, "accepted connection from %s\n", buf); memset(buf, 0, sizeof(buf)); bytes_read = read(client, buf, sizeof(buf)); if( bytes_read 0 ) { printf("received [%s]\n", buf); } sprintf(str,"to Android."); printf("sent [%s]\n",str); write(client, str, sizeof(str)); close(client); close(s); sdp_close( session ); return 0; } sdp_session_t *register_service() { uint32_t svc_uuid_int[] = { 0x00000000,0x00000000,0x00000000,0x00000000 }; uint8_t rfcomm_channel = 11; const char *service_name = "Remote Host"; const char *service_dsc = "What the remote should be connecting to."; const char *service_prov = "Your mother"; uuid_t root_uuid, l2cap_uuid, rfcomm_uuid, svc_uuid; sdp_list_t *l2cap_list = 0, *rfcomm_list = 0, *root_list = 0, *proto_list = 0, *access_proto_list = 0; sdp_data_t *channel = 0, *psm = 0; sdp_record_t *record = sdp_record_alloc(); // set the general service ID sdp_uuid128_create( &svc_uuid, &svc_uuid_int ); sdp_set_service_id( record, svc_uuid ); // make the service record publicly browsable sdp_uuid16_create(&root_uuid, PUBLIC_BROWSE_GROUP); root_list = sdp_list_append(0, &root_uuid); sdp_set_browse_groups( record, root_list ); // set l2cap information sdp_uuid16_create(&l2cap_uuid, L2CAP_UUID); l2cap_list = sdp_list_append( 0, &l2cap_uuid ); proto_list = sdp_list_append( 0, l2cap_list ); // set rfcomm information sdp_uuid16_create(&rfcomm_uuid, RFCOMM_UUID); channel = sdp_data_alloc(SDP_UINT8, &rfcomm_channel); rfcomm_list = sdp_list_append( 0, &rfcomm_uuid ); sdp_list_append( rfcomm_list, channel ); sdp_list_append( proto_list, rfcomm_list ); // attach protocol information to service record access_proto_list = sdp_list_append( 0, proto_list ); sdp_set_access_protos( record, access_proto_list ); // set the name, provider, and description sdp_set_info_attr(record, service_name, service_prov, service_dsc); int err = 0; sdp_session_t *session = 0; // connect to the local SDP server, register the service record, and // disconnect session = sdp_connect( BDADDR_ANY, BDADDR_LOCAL, SDP_RETRY_IF_BUSY ); err = sdp_record_register(session, record, 0); // cleanup //sdp_data_free( channel ); sdp_list_free( l2cap_list, 0 ); sdp_list_free( rfcomm_list, 0 ); sdp_list_free( root_list, 0 ); sdp_list_free( access_proto_list, 0 ); return session; } And another piece of code, in addition to 'sdptool browse local' which can verifty that the service record is running on the pc: int main(int argc, char **argv) { uuid_t svc_uuid; uint32_t svc_uuid_int[] = { 0x00000000,0x00000000,0x00000000,0x00000000 }; int err; bdaddr_t target; sdp_list_t *response_list = NULL, *search_list, *attrid_list; sdp_session_t *session = 0; str2ba( "01:23:45:67:89:AB", &target ); // connect to the SDP server running on the remote machine session = sdp_connect( BDADDR_ANY, BDADDR_LOCAL, SDP_RETRY_IF_BUSY ); // specify the UUID of the application we're searching for sdp_uuid128_create( &svc_uuid, &svc_uuid_int ); search_list = sdp_list_append( NULL, &svc_uuid ); // specify that we want a list of all the matching applications' attributes uint32_t range = 0x0000ffff; attrid_list = sdp_list_append( NULL, &range ); // get a list of service records that have UUID 0xabcd err = sdp_service_search_attr_req( session, search_list, \ SDP_ATTR_REQ_RANGE, attrid_list, &response_list); sdp_list_t *r = response_list; // go through each of the service records for (; r; r = r-next ) { sdp_record_t *rec = (sdp_record_t*) r-data; sdp_list_t *proto_list; // get a list of the protocol sequences if( sdp_get_access_protos( rec, &proto_list ) == 0 ) { sdp_list_t *p = proto_list; // go through each protocol sequence for( ; p ; p = p-next ) { sdp_list_t *pds = (sdp_list_t*)p-data; // go through each protocol list of the protocol sequence for( ; pds ; pds = pds-next ) { // check the protocol attributes sdp_data_t *d = (sdp_data_t*)pds-data; int proto = 0; for( ; d; d = d-next ) { switch( d-dtd ) { case SDP_UUID16: case SDP_UUID32: case SDP_UUID128: proto = sdp_uuid_to_proto( &d-val.uuid ); break; case SDP_UINT8: if( proto == RFCOMM_UUID ) { printf("rfcomm channel: %d\n",d-val.int8); } break; } } } sdp_list_free( (sdp_list_t*)p-data, 0 ); } sdp_list_free( proto_list, 0 ); } printf("found service record 0x%x\n", rec-handle); sdp_record_free( rec ); } sdp_close(session); } Output: $ ./search rfcomm channel: 11 found service record 0x10008 sdptool: Service Name: Remote Host Service Description: What the remote should be connecting to. Service Provider: Your mother Service RecHandle: 0x10008 Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 11 And for logcat I'm getting this: 07-22 15:57:06.087: ERROR/BTLD(215): ****************search UUID = 0000*********** 07-22 15:57:06.087: INFO//system/bin/btld(209): btapp_dm_GetRemoteServiceChannel() 07-22 15:57:06.087: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:06.097: INFO/ActivityManager(88): Displayed activity com.example.socktest/.socktest: 79 ms (total 79 ms) 07-22 15:57:06.697: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:07.517: WARN/BTLD(215): ccb timer ticks: 2147483648 07-22 15:57:07.517: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:07.547: WARN/BTLD(215): info:x10 07-22 15:57:07.547: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 10 pbytes (hdl 14) 07-22 15:57:07.547: DEBUG/DTUN_HCID_BZ4(253): dtun_dm_sig_link_up() 07-22 15:57:07.547: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_link_up: dummy_handle = 342 07-22 15:57:07.547: DEBUG/ADAPTER(253): adapter_get_device(00:02:72:AB:7C:EE) 07-22 15:57:07.547: ERROR/BluetoothEventLoop.cpp(88): pollData[0] is revented, check next one 07-22 15:57:07.547: ERROR/BluetoothEventLoop.cpp(88): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/253/hci0/dev_00_02_72_AB_7C_EE 07-22 15:57:07.777: WARN/BTLD(215): process_service_search_attr_rsp 07-22 15:57:07.787: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 13 pbytes (hdl 14) 07-22 15:57:07.787: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_rmt_service_channel: success=0, service=00000000 07-22 15:57:07.787: ERROR/DTUN_HCID_BZ4(253): discovery unsuccessful! 07-22 15:57:08.497: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:09.507: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Wake, 0x8003 #### 07-22 15:57:09.597: INFO/BTL-IFS(215): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 11 pbytes (hdl 14) 07-22 15:57:09.597: DEBUG/DTUN_HCID_BZ4(253): dtun_dm_sig_link_down() 07-22 15:57:09.597: INFO/DTUN_HCID_BZ4(253): dtun_dm_sig_link_down device = 0xf7a0 handle = 342 reason = 22 07-22 15:57:09.597: ERROR/BluetoothEventLoop.cpp(88): pollData[0] is revented, check next one 07-22 15:57:09.597: ERROR/BluetoothEventLoop.cpp(88): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/253/hci0/dev_00_02_72_AB_7C_EE 07-22 15:57:09.597: DEBUG/BluetoothA2dpService(88): Received intent Intent { act=android.bluetooth.device.action.ACL_DISCONNECTED (has extras) } 07-22 15:57:10.107: INFO//system/bin/btld(209): ##### USerial_Ioctl: BT_Sleep, 0x8004 #### 07-22 15:57:12.107: DEBUG/BluetoothService(88): Cleaning up failed UUID channel lookup: 00:02:72:AB:7C:EE 00000000-0000-0000-0000-000000000000 07-22 15:57:12.107: ERROR/Socket Test(5234): connect() failed 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_abort [31,32,33] 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: s 31, how 2 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: fd (-1:31), bta -1, rc 0, wflags 0x0 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): __close_prot_rfcomm: fd 31 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): __close_prot_rfcomm: bind not completed on this socket 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btlif_signal_event: fd (-1:31), bta -1, rc 0, wflags 0x0 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btlif_signal_event: event BTLIF_BTS_EVT_ABORT matched 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: wrp_close_s_only [31] (31:-1) [] 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: data socket closed 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wsactive_del: delete wsock 31 from active list [ad3e1494] 07-22 15:57:12.107: DEBUG/BTL_IFC_WRP(5234): wrp_close_s_only: wsock fully closed, return to pool 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): btsk_free: success 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_write: wrote 1 bytes out of 1 on fd 33 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_destroy 07-22 15:57:12.107: DEBUG/ASOCKWRP(5234): asocket_abort [31,32,33] 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: s 31, how 2 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_shutdown: btsk not found, normal close (31) 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_write: wrote 1 bytes out of 1 on fd 33 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 33 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (33) 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 32 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (32) 07-22 15:57:12.107: INFO/BLZ20_WRAPPER(5234): blz20_wrp_close: s 31 07-22 15:57:12.107: DEBUG/BLZ20_WRAPPER(5234): blz20_wrp_close: btsk not found, normal close (31) 07-22 15:57:12.157: DEBUG/Sensors(88): close_akm, fd=151 07-22 15:57:12.167: ERROR/CachedBluetoothDevice(477): onUuidChanged: Time since last connect14970690 07-22 15:57:12.237: DEBUG/Socket Test(5234): -On Stop- Sorry for bombarding you guys with what seems like a difficult question and a lot to read, but I've been working on this problem for a while and I've tried a lot of different things to get this working. Let me reiterate, I can get it to work, but not using service discovery protocol. I've tried a several different UUIDs and on two different computers, although I only have my HTC Incredible to test with. I've also heard some rumors that the BT stack wasn't working on the HTC Droid, but that isn't the case, at least, for PC interaction.

  Read the article

• The Interaction between Three-Tier Client/Server Model and Three-Tier Application Architecture Model

  The three-tier client/server model is a network architectural approach currently used in modern networking. This approach divides a network in to three distinct components. Three-Tier Client/Server Model Components Client Component Server Component Database Component The Client Component of the network typically represents any device on the network. A basic example of this would be computer or another network/web enabled devices that are connected to a network. Network clients request resources on the network, and are usually equipped with a user interface for the presentation of the data returned from the Server Component. This process is done through the use of various software clients, and example of this can be seen through the use of a web browser client. The web browser request information from the Server Component located on the network and then renders the results for the user to process. The Server Components of the network return data based on specific client request back to the requesting client.  Server Components also inherit the attributes of a Client Component in that they are a device on the network and that they can also request information from other Server Components. However what differentiates a Client Component from a Server Component is that a Server Component response to requests from devices on the network. An example of a Server Component can be seen in a web server. A web server listens for new requests and then interprets the request, processes the web pages, and then returns the processed data back to the web browser client so that it may render the data for the user to interpret. The Database Component of the network returns unprocessed data from databases or other resources. This component also inherits attributes from the Server Component in that it is a device on a network, it can request information from other server components and database components, and it also listens for new requests so that it can return data when needed. The three-tier client/server model is very similar to the three-tier application architecture model, and in fact the layers can be mapped to one another. Three-Tier Application Architecture Model Presentation Layer/Logic Business Layer/Logic Data Layer/Logic The Presentation Layer including its underlying logic is very similar to the Client Component of the three-tiered model. The Presentation Layer focuses on interpreting the data returned by the Business Layer as well as presents the data back to the user.  Both the Presentation Layer and the Client Component focus primarily on the user and their experience. This allows for segments of the Business Layer to be distributable and interchangeable because the Presentation Layer is not directly integrated in with Business Layer. The Presentation Layer does not care where the data comes from as long as it is in the proper format. This allows for the Presentation Layer and Business Layer to be stored on one or more different servers so that it can provide a higher availability to clients requesting data. A good example of this is a web site that uses load balancing. When a web site decides to take on the task of load balancing they must obtain a network device that sits in front of a one or machines in order to distribute the request across multiple servers. When a user comes in through the load balanced device they are redirected to a specific server based on a few factors. Common Load Balancing Factors Current Server Availability Current Server Response Time Current Server Priority The Business Layer and corresponding logic are business rules applied to data prior to it being sent to the Presentation Layer. These rules are used to manipulate the data coming from the Data Access Layer, in addition to validating any data prior to being stored in the Data Access Layer. A good example of this would be when a user is trying to create multiple accounts under one email address. The Business Layer logic can prevent duplicate accounts by enforcing a unique email for every new account before the data is even stored in the Data Access Layer. The Server Component can be directly tied to this layer in that the server typically stores and process the Business Layer before it is returned to the end-user via the Presentation Layer. In addition the Server Component can also run automated process through the Business Layer on the data in the Data Access Layer so that additional business analysis can be derived from the data that has been already collected. The Data Layer and its logic are responsible for storing information so that it can be easily retrieved. Typical in most modern applications data is stored in a database management system however data can also be in the form of files stored on a file server. In addition a database can take on one of several forms. Common Database Formats XML File Pipe Delimited File Tab Delimited File Comma Delimited File (CSV) Plain Text File Microsoft Access Microsoft SQL Server MySql Oracle Sybase The Database component of the Networking model can be directly tied to the Data Layer because this is where the Data Layer obtains the data to return back the Business Layer. The Database Component basically allows for a place on the network to store data for future use. This enables applications to save data when they can and then quickly recall the saved data as needed so that the application does not have to worry about storing the data in memory. This prevents overhead that could be created when an application must retain all data in memory. As you can see the Three-Tier Client/Server Networking Model and the Three-Tiered Application Architecture Model rely very heavily on one another to function especially if different aspects of an application are distributed across an entire network. The use of various servers and database servers are wonderful when an application has a need to distribute work across the network. Network Components and Application Layers Interaction Database components will store all data needed for the Data Access Layer to manipulate and return to the Business Layer Server Component executes the Business Layer that manipulates data so that it can be returned to the Presentation Layer Client Component hosts the Presentation Layer that  interprets the data and present it to the user

  Read the article

• XNA Level Select Menu

  - by user29901

  I'll try to explain this the best I can. I'm trying to create a level select menu for a game I'm making. The menu is basically a group of blocks numbered 1-16, similar to something like the Angry Birds menu. What I've done is created a cursor, basically just an outline to surround a block, that the user can move to select what level they want to play. What I want it do is move from block to block instead of simply moving around on the X and Y axes as it does now. So my question is, how can I get the cursor (highLight in the below code) to move from block to block(destinationRectangle1 etc. in the code)? /// Field for the "cursor" Vector2 highLightPos = new Vector2(400, 200); ///This is the Update code KeyboardState keyBoardState = Keyboard.GetState(); if (keyBoardState.IsKeyDown(Keys.Up)) highLightPos.Y--; if (keyBoardState.IsKeyDown(Keys.Down)) highLightPos.Y++; if (keyBoardState.IsKeyDown(Keys.Right)) highLightPos.X++; if (keyBoardState.IsKeyDown(Keys.Left)) highLightPos.X--; /// This is the draw code SpriteBatch spriteBatch = ScreenManager.SpriteBatch; Rectangle screenRectangle = new Rectangle(0, 0, 1280, 720); Rectangle destinationRectangle1 = new Rectangle(400, 200, 64, 64); Rectangle frameRectangle1 = new Rectangle(0, 0, 64, 64); Rectangle destinationRectangle2 = new Rectangle(500, 200, 64, 64); Rectangle frameRectangle2 = new Rectangle(64, 0, 64, 64); Rectangle destinationRectangle3 = new Rectangle(600, 200, 64, 64); Rectangle frameRectangle3 = new Rectangle(128, 0, 64, 64); Rectangle destinationRectangle4 = new Rectangle(700, 200, 64, 64); Rectangle frameRectangle4 = new Rectangle(192, 0, 64, 64); Rectangle destinationRectangle5 = new Rectangle(800, 200, 64, 64); Rectangle frameRectangle5 = new Rectangle(256, 0, 64, 64); Rectangle destinationRectangle6 = new Rectangle(400, 300, 64, 64); Rectangle frameRectangle6 = new Rectangle(320, 0, 64, 64); Rectangle destinationRectangle7 = new Rectangle(500, 300, 64, 64); Rectangle frameRectangle7 = new Rectangle(384, 0, 64, 64); Rectangle destinationRectangle8 = new Rectangle(600, 300, 64, 64); Rectangle frameRectangle8 = new Rectangle(448, 0, 64, 64); Rectangle destinationRectangle9 = new Rectangle(700, 300, 64, 64); Rectangle frameRectangle9 = new Rectangle(0, 64, 64, 64); Rectangle destinationRectangle10 = new Rectangle(800, 300, 64, 64); Rectangle frameRectangle10 = new Rectangle(64, 64, 64, 64); Rectangle destinationRectangle11 = new Rectangle(400, 400, 64, 64); Rectangle frameRectangle11 = new Rectangle(128, 64, 64, 64); Rectangle destinationRectangle12 = new Rectangle(500, 400, 64, 64); Rectangle frameRectangle12 = new Rectangle(192, 64, 64, 64); Rectangle destinationRectangle13 = new Rectangle(600, 400, 64, 64); Rectangle frameRectangle13 = new Rectangle(256, 64, 64, 64); Rectangle destinationRectangle14 = new Rectangle(700, 400, 64, 64); Rectangle frameRectangle14 = new Rectangle(320, 64, 64, 64); Rectangle destinationRectangle15 = new Rectangle(800, 400, 64, 64); Rectangle frameRectangle15 = new Rectangle(384, 64, 64, 64); Rectangle destinationRectangle16 = new Rectangle(600, 500, 64, 64); Rectangle frameRectangle16 = new Rectangle(448, 64, 64, 64); spriteBatch.Begin(); spriteBatch.Draw(forestBG, screenRectangle, Color.White); spriteBatch.Draw(highLight, highLightPos, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle1, frameRectangle1, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle2, frameRectangle2, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle3, frameRectangle3, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle4, frameRectangle4, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle5, frameRectangle5, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle6, frameRectangle6, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle7, frameRectangle7, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle8, frameRectangle8, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle9, frameRectangle9, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle10, frameRectangle10, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle11, frameRectangle11, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle12, frameRectangle12, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle13, frameRectangle13, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle14, frameRectangle14, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle15, frameRectangle15, Color.White); spriteBatch.Draw(levelSelectTiles, destinationRectangle16, frameRectangle16, Color.White); spriteBatch.End(); PS, I'm aware that this code is probably inefficient, cumbersome or that there's a better way to draw parts of a tile sheet. Any suggestions would be appreciated.

  Read the article

• Silverlight Cream Monday WP7 App Review # 1

  - by Dave Campbell

  I'm going to try something here... if it seems useful, I'll continue, if it doesn't, I'll stop... so give me feedback! There are *lots* of Apps in the WP7 Marketplace, and heaven help me, but the Marketplace sucks for finding stuff. I won't rehash what's already been said in the blogs, but I agree with one and all. I went out last Saturday to find 2 apps that I knew were released, and couldn't do so on my device. Even in the Zune app, it took quite a while to find them... ok, I'll back off a bit, because I just found out I can do 'Search' now if I know the name... I didn't think that was working before. So my thought is on Monday (like today), I will post a review of 5 apps/games I either use or have played with on my device. These are strictly my opinions, you understand, but hey... it's better than a poke in the eye with an iPhone! A few disclaimers:     Feel free to write me about your app and tell me about it. While it would be very cool to receive a whole bunch of xap files to review, at this point, for technical reasons, I'm unable to side-load my device. Since I plan on only doing this one day a week, and only 5, I may never get caught up, so if you send me some info, be patient. Re: games ... remember I'm old... I'm from the era of Colossal Cave and Zork. Duke-Nukem 2D and Captain Comic were awesome. I don't own an XBOX or any other game system, so take game reviews from my perspective -- who knows, it may be refreshing :) I won't pay for an app or game just to try it. If you expect me to test-drive your app, it's going to have to have a Free Trial. In this Issue:   Jingo! is the first app I bought, just to see what the experience was like. It's very much like a game we used to play in school in the Army in 1971 on paper we passed around. Sort of a cross between hangman and Mastermind, you try to figure out the hidden word in 5 tries. You get really good at 5-letter words after a while. I like this because you have to think, and you're not pressured by a clock Jingo! is by James Furdell and is $1.99 I reviewed René Schulte's Pictures Lab a while back, and have not changed my mind. This is an excellent app for playing with any photo on your device... one you've just taken, one you've synced from your PC, or one you've saved from email. I like this because you can get some cool effects for your photos, and it just works. Pictures Lab is by Schulte Software Development and is $1.99 Since I work as a consultant, and from home, I wanted something I could track my time with. I've test-driven all the contenders I could find so far on the phone, and so far I like ONTRACK! the best. If asked, I have some suggestions, but it's probably just the way I work or think. What I do like is I can tap a project to start/stop/restart a counter, and at the end of the day it shows me how much time I've been working. If there's a way to make an adjustment in case you forget to tap the counter, I don't know how to do it, and that's my biggest complaint. I like this because you can get a daily readout which you can also email as a spreadsheet. The daily results display is very good. ONTRACK! is by Qmino and is $2.99 Remember Item 4 above... I've been playing guitar for 48 years... obviously since before the invention of 'tuners', so I'm not as dependent upon these as some folks are. I've tried some in the past and have always felt I can do just as good by ear (I have perfect relative pitch). So, I gave this app by András Velvárt a dance just to see how it works, and it is surprisingly good. If you're used to one of the stage tuners this may take a little getting used to, but it does the job. The difference with this one is there is no real 'null' point inside which you can think your guitar is in tune. The soundwave stays visible on the device, and if it's moving to the right, your string is flat, if it's moving to the left, your string is sharp. Getting it exact might be tricky, but it is exact! If you need to rely on a tuner, this is a good choice in my opinion, exactly because of the sensitivity.. tune up with this and you're dead-on. Guitar Tuner is by Kinabalu Innovation Limited and is $0.99 Popper 2 is the WP7 version of a wildly popular game by Bill Reiss named Dr. Popper. You can get a trial, or you can now get a free lite version of the game. Popper 2 is a fast-paced bubble breaker game. I find it something fun to play when I just want to buzz out, but maybe the best review is that my daughter didn't want to give my phone back when I showed it to her, and always wants to grab my phone to play 'that game'. A fun distraction with great graphics and a great price Popper 2 is by Blue Rose Systems, LLC and is $1.29 Let me know what you think of the idea of doing reviews, or the layout/whatever, and Stay in the 'Light!   Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• The Linux powered LAN Gaming House

  - by sachinghalot

  LAN parties offer the enjoyment of head to head gaming in a real-life social environment. In general, they are experiencing decline thanks to the convenience of Internet gaming, but Kenton Varda is a man who takes his LAN gaming very seriously. His LAN gaming house is a fascinating project, and best of all, Linux plays a part in making it all work.Varda has done his own write ups (short, long), so I'm only going to give an overview here. The setup is a large house with 12 gaming stations and a single server computer.The client computers themselves are rack mounted in a server room, and they are linked to the gaming stations on the floor above via extension cables (HDMI for video and audio and USB for mouse and keyboard). Each client computer, built into a 3U rack mount case, is a well specced gaming rig in its own right, sporting an Intel Core i5 processor, 4GB of RAM and an Nvidia GeForce 560 along with a 60GB SSD drive.Originally, the client computers ran Ubuntu Linux rather than Windows and the games executed under WINE, but Varda had to abandon this scheme. As he explains on his site:"Amazingly, a majority of games worked fine, although many had minor bugs (e.g. flickering mouse cursor, minor rendering artifacts, etc.). Some games, however, did not work, or had bad bugs that made them annoying to play."Subsequently, the gaming computers have been moved onto a more conventional gaming choice, Windows 7. It's a shame that WINE couldn't be made to work, but I can sympathize as it's rare to find modern games that work perfectly and at full native speed. Another problem with WINE is that it tends to suffer from regressions, which is hardly surprising when considering the difficulty of constantly improving the emulation of the Windows API. Varda points out that he preferred working with Linux clients as they were easier to modify and came with less licensing baggage.Linux still runs the server and all of the tools used are open source software. The hardware here is a Intel Xeon E3-1230 with 4GB of RAM. The storage hanging off this machine is a bit more complex than the clients. In addition to the 60GB SSD, it also has 2x1TB drives and a 240GB SDD.When the clients were running Linux, they booted over PXE using a toolchain that will be familiar to anyone who has setup Linux network booting. DHCP pointed the clients to the server which then supplied PXELINUX using TFTP. When booted, file access was accomplished through network block device (NBD). This is a very easy to use system that allows you to serve the contents of a file as a block device over the network. The client computer runs a user mode device driver and the device can be mounted within the file system using the mount command.One snag with offering file access via NBD is that it's difficult to impose any security restrictions on different areas of the file system as the server only sees a single file. The advantage is perfomance as the client operating system simply sees a block device, and besides, these security issues aren't relevant in this setup.Unfortunately, Windows 7 can't use NBD, so, Varda had to switch to iSCSI (which works in both server and client mode under Linux). His network cards are not compliant with this standard when doing a netboot, but fortunately, gPXE came to the rescue, and he boostraps it over PXE. gPXE is also available as an ISO image and is worth knowing about if you encounter an awkward machine that can't manage a network boot. It can also optionally boot from a HTTP server rather than the more traditional TFTP server.According to Varda, booting all 12 machines over the Gigabit Ethernet network is surprisingly fast, and once booted, the machines don't seem noticeably slower than if they were using local storage. Once loaded, most games attempt to load in as much data as possible, filling the RAM, and the the disk and network bandwidth required is small. It's worth noting that these are aspects of this project that might differ from some other thin client scenarios.At time of writing, it doesn't seem as though the local storage of the client machines is being utilized. Instead, the clients boot into Windows from an image on the server that contains the operating system and the games themselves. It uses the copy on write feature of LVM so that any writes from a client are added to a differencing image allocated to that client. As the administrator, Varda can log into the Linux server and authorize changes to the master image for updates etc.SummaryOverall, Varda estimates the total cost of the project at about $40,000, and of course, he needed a property that offered a large physical space in order to house the computers and the gaming workstations. Obviously, this project has stark differences to most thin client projects. The balance between storage, network usage, GPU power and security would not be typical of an office installation, for example. The only letdown is that WINE proved to be insufficiently compatible to run a wide variety of modern games, but that is, perhaps, asking too much of it, and hats off to Varda for trying to make it work.

  Read the article

• Could not connect to wireless unitl reboot (nl80211)

  - by user107410

  I'm using Samsung NP900X3C. I have problem with occasionally connecting to WIFI, with Ubuntu 12.10. Sometimes my computer could not connect to WIFI "blab", neither after reboot computer. Only solution is to restart WIFI hotspot. It's public WIFI, used by many users, that don't have that problem. My /var/log/syslog: Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.908610] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:39 k15 kernel: [ 8.915032] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:39 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:39 k15 kernel: [ 8.916753] wlan0: authenticated Nov 12 10:09:39 k15 kernel: [ 8.916839] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:39 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.386212] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:09:42 k15 kernel: [ 12.389114] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:09:42 k15 kernel: [ 12.391021] wlan0: authenticated Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:09:42 k15 kernel: [ 12.391332] wlan0: waiting for beacon from 64:70:02:89:7c:d7 Nov 12 10:09:42 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> disconnected Nov 12 10:09:43 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: disconnected -> scanning Nov 12 10:09:46 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) and after restart WiFi, I could connect: Nov 12 10:11:51 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: inactive -> scanning Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: SME: Trying to authenticate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 kernel: [ 144.445154] wlan0: authenticate with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.453994] wlan0: send auth to 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Trying to associate with 64:70:02:89:7c:d7 (SSID='blab' freq=2427 MHz) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: scanning -> authenticating Nov 12 10:11:55 k15 kernel: [ 144.455860] wlan0: authenticated Nov 12 10:11:55 k15 kernel: [ 144.458681] wlan0: associate with 64:70:02:89:7c:d7 (try 1/3) Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: authenticating -> associating Nov 12 10:11:55 k15 kernel: [ 144.462799] wlan0: RX AssocResp from 64:70:02:89:7c:d7 (capab=0x431 status=0 aid=9) Nov 12 10:11:55 k15 kernel: [ 144.486368] wlan0: associated Nov 12 10:11:55 k15 wpa_supplicant[1308]: wlan0: Associated with 64:70:02:89:7c:d7 Nov 12 10:11:55 k15 kernel: [ 144.487435] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associating -> associated Nov 12 10:11:55 k15 NetworkManager[1004]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake This problem is appearing regulary. My WiFi device control is nl80211. Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): using nl80211 for WiFi device control Nov 12 10:09:32 k15 NetworkManager[1004]: <warn> (wlan0): driver supports Access Point (AP) mode Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/0 Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): now managed Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2] Nov 12 10:09:32 k15 NetworkManager[1004]: <info> (wlan0): bringing up device.

  Read the article

• Trouble with AABB collision response and physics

  - by WCM

  I have been racking my brain trying to figure out a problem I am having with physics and basic AABB collision response. I am fairly close as the physics are mostly right. Gravity feels good and movement is solid. The issue I am running into is that when I land on the test block in my project, I can jump off of it most of the time. If I repeatedly jump in place, I will eventually get stuck one or two pixels below the surface of the test block. If I try to jump, I can become free of the other block, but it will happen again a few jumps later. I feel like I am missing something really obvious with this. I have two functions that support the detection and function to return a vector for the overlap of the two rectangle bounding boxes. I have a single update method that is processing the physics and collision for the entity. I feel like I am missing something very simple, like an ordering of the physics vs. collision response handling. Any thoughts or help can be appreciated. I apologize for the format of the code, tis prototype code mostly. The collision detection function: public static bool Collides(Rectangle source, Rectangle target) { if (source.Right < target.Left || source.Bottom < target.Top || source.Left > target.Right || source.Top > target.Bottom) { return false; } return true; } The overlap function: public static Vector2 GetMinimumTranslation(Rectangle source, Rectangle target) { Vector2 mtd = new Vector2(); Vector2 amin = source.Min(); Vector2 amax = source.Max(); Vector2 bmin = target.Min(); Vector2 bmax = target.Max(); float left = (bmin.X - amax.X); float right = (bmax.X - amin.X); float top = (bmin.Y - amax.Y); float bottom = (bmax.Y - amin.Y); if (left > 0 || right < 0) return Vector2.Zero; if (top > 0 || bottom < 0) return Vector2.Zero; if (Math.Abs(left) < right) mtd.X = left; else mtd.X = right; if (Math.Abs(top) < bottom) mtd.Y = top; else mtd.Y = bottom; // 0 the axis with the largest mtd value. if (Math.Abs(mtd.X) < Math.Abs(mtd.Y)) mtd.Y = 0; else mtd.X = 0; return mtd; } The update routine (gravity = 0.001f, jumpHeight = 0.35f, moveAmount = 0.15f): public void Update(GameTime gameTime) { Acceleration.Y = gravity; Position += new Vector2((float)(movement * moveAmount * gameTime.ElapsedGameTime.TotalMilliseconds), (float)(Velocity.Y * gameTime.ElapsedGameTime.TotalMilliseconds)); Velocity.Y += Acceleration.Y; Vector2 previousPosition = new Vector2((int)Position.X, (int)Position.Y); KeyboardState keyboard = Keyboard.GetState(); movement = 0; if (keyboard.IsKeyDown(Keys.Left)) { movement -= 1; } if (keyboard.IsKeyDown(Keys.Right)) { movement += 1; } if (Position.Y + 16 > GameClass.Instance.GraphicsDevice.Viewport.Height) { Velocity.Y = 0; Position = new Vector2(Position.X, GameClass.Instance.GraphicsDevice.Viewport.Height - 16); IsOnSurface = true; } if (Collision.Collides(BoundingBox, GameClass.Instance.block.BoundingBox)) { Vector2 mtd = Collision.GetMinimumTranslation(BoundingBox, GameClass.Instance.block.BoundingBox); Position += mtd; Velocity.Y = 0; IsOnSurface = true; } if (keyboard.IsKeyDown(Keys.Space) && !previousKeyboard.IsKeyDown(Keys.Space)) { if (IsOnSurface) { Velocity.Y = -jumpHeight; IsOnSurface = false; } } previousKeyboard = keyboard; } This is also a full download to the project. https://www.box.com/s/3rkdtbso3xgfgc2asawy P.S. I know that I could do this with the XNA Platformer Starter Kit algo, but it has some deep flaws that I am going to try to live without. I'd rather go the route of collision response via an overlay function. Thanks for any and all insight!

  Read the article

• Exadata?????????INSERT?UPDATE

  - by Liu Maclean(???)

  Hybrid Columnar Compression??????Exadata?????????????,??????????(advanced compression)??,Hybrid columnar compression (HCC) ???Exadata????????HCC???????????CU(compression unit?????),??CU??????????,?????????????????????????,???CU????block??????????????? ???????INSERT/UPDATE??,??????????????,????UPDATE/INSERT???HCC?????????????????? hybrid columnar compression???????????????(bulk initial load)??,??????(direct load)??ALTER TABLE MOVE, IMPDP???????(append INSERT),??HCC??????????????????????? ???????????????????,?????????CU????????? ??????????????HCC?????????????for OLTP?????? ????????: SQL*Plus: Release 11.2.0.2.0 Production on Wed Sep 12 06:14:53 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> grant dba to scott; Grant succeeded. SQL> conn scott/oracle Connected. SQL> SQL> create table hcc_maclean tablespace users compress for query high as select * from dba_objects; Table created. 1* select rowid,owner,object_name,dbms_rowid.rowid_block_number(rowid) from hcc_maclean where owner='MACLEAN' SQL> / ROWID OWNER OBJECT_NAME DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) ------------------------------ ------------------------------ -------------------- ------------------------------------ AAAThuAAEAAAHTJAOI MACLEAN SALES 29897 AAAThuAAEAAAHTJAOJ MACLEAN MYCUSTOMERS 29897 AAAThuAAEAAAHTJAOK MACLEAN MYCUST_ARCHIVE 29897 AAAThuAAEAAAHTJAOL MACLEAN MYCUST_QUERY 29897 AAAThuAAEAAAHTJAOh MACLEAN COMPRESS_QUERY 29897 AAAThuAAEAAAHTJAOi MACLEAN UNCOMPRESS 29897 AAAThuAAEAAAHTJAOj MACLEAN CHAINED_ROWS 29897 AAAThuAAEAAAHTJAOk MACLEAN COMPRESS_QUERY1 29897 8 rows selected. select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from hcc_maclean where owner='MACLEAN'; session A: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOI'; session B: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOJ'; SQL> select sid,wait_event_text,BLOCKER_SID from v$wait_chains; SID WAIT_EVENT_TEXT BLOCKER_SID ---------- ---------------------------------------------------------------- ----------- 13 enq: TX - row lock contention 136 136 SQL*Net message from client ????session A block B,????HCC???update row??CU?????CU?????? SQL> alter system checkpoint; System altered. SQL> / System altered. SQL> alter system dump datafile 4 block 29897 2 ; Block header dump: 0x010074c9 Object id on Block? Y seg/obj: 0x1386e csc: 0x00.1cad7e itc: 3 flg: E typ: 1 - DATA brn: 0 bdba: 0x10074c8 ver: 0x01 opc: 0 inc: 0 exflg: 0 Itl Xid Uba Flag Lck Scn/Fsc 0x01 0xffff.000.00000000 0x00000000.0000.00 C--- 0 scn 0x0000.001cabfa 0x02 0x000a.00a.00000430 0x00c051a7.0169.17 ---- 1 fsc 0x0000.00000000 0x03 0x0000.000.00000000 0x00000000.0000.00 ---- 0 fsc 0x0000.00000000 avsp=0x14 tosp=0x14 r0_9ir2=0x0 mec_kdbh9ir2=0x0 76543210 shcf_kdbh9ir2=---------- 76543210 flag_9ir2=--R----- Archive compression: Y fcls_9ir2[0]={ } 0x16:pti[0] nrow=1 offs=0 0x1a:pri[0] offs=0x30 block_row_dump: tab 0, row 0, @0x30 tl: 8016 fb: --H-F--N lb: 0x2 cc: 1 ==>??CU??ITL 0x02 nrid: 0x010074ca.0 col 0: [8004] Compression level: 02 (Query High) Length of CU row: 8004 kdzhrh: ------PC CBLK: 1 Start Slot: 00 NUMP: 01 PNUM: 00 POFF: 7984 PRID: 0x010074ca.0 CU header: CU version: 0 CU magic number: 0x4b445a30 CU checksum: 0xf8faf86e CU total length: 8694 CU flags: NC-U-CRD-OP ncols: 15 nrows: 995 algo: 0 CU decomp length: 8487 len/value length: 100111 row pieces per row: 1 num deleted rows: 1 deleted rows: 904, START_CU: ????????????row?????: SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAAThuAAEAAAHTJAOk') from dual; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAATHUAAEAAAHTJAOK' -------------------------------------------------------------------------------- 4 COMP_NOCOMPRESS CONSTANT NUMBER := 1;COMP_FOR_OLTP CONSTANT NUMBER := 2;COMP_FOR_QUERY_HIGH CONSTANT NUMBER := 4;COMP_FOR_QUERY_LOW CONSTANT NUMBER := 8;COMP_FOR_ARCHIVE_HIGH CONSTANT NUMBER := 16;COMP_FOR_ARCHIVE_LOW CONSTANT NUMBER := 32; COMP_RATIO_MINROWS CONSTANT NUMBER := 1000000;COMP_RATIO_ALLROWS CONSTANT NUMBER := -1; ?????????????,??COMP_FOR_QUERY_HIGH?4,COMP_FOR_QUERY_LOW ?8 ?????????GET_COMPRESSION_TYPE??rowid????????4?????COMP_FOR_QUERY_HIGH????: SQL> update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where owner='MACLEAN'; 8 rows updated. SQL> commit; Commit complete. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 1 1 1 1 1 1 1 1 8 rows selected. ??????????????COMPRESSION_TYPE?COMP_FOR_QUERY_HIGH???COMP_NOCOMPRESS,????????compress for query high????????????????? ?11g????????????????????HCC??????????? ALTER TABLE MOVE???????????????????HCC??? SQL> ALTER TABLE hcc_MACLEAN move COMPRESS FOR ARCHIVE HIGH; Table altered. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 16 16 16 16 16 16 16 16 8 rows selected.

  Read the article

• Optimizing drawing of cubes

  - by Christian Frantz

  After googling for hours I've come to a few conclusions, I need to either rewrite my whole cube class, or figure out how to use hardware instancing. I can draw up to 2500 cubes with little lag, but after that my fps drops. Is there a way I can use my class for hardware instancing? Or would I be better off rewriting my class for optimization? public class Cube { public GraphicsDevice device; public VertexBuffer cubeVertexBuffer; public Cube(GraphicsDevice graphicsDevice) { device = graphicsDevice; var vertices = new List<VertexPositionTexture>(); BuildFace(vertices, new Vector3(0, 0, 0), new Vector3(0, 1, 1)); BuildFace(vertices, new Vector3(0, 0, 1), new Vector3(1, 1, 1)); BuildFace(vertices, new Vector3(1, 0, 1), new Vector3(1, 1, 0)); BuildFace(vertices, new Vector3(1, 0, 0), new Vector3(0, 1, 0)); BuildFaceHorizontal(vertices, new Vector3(0, 1, 0), new Vector3(1, 1, 1)); BuildFaceHorizontal(vertices, new Vector3(0, 0, 1), new Vector3(1, 0, 0)); cubeVertexBuffer = new VertexBuffer(device, VertexPositionTexture.VertexDeclaration, vertices.Count, BufferUsage.WriteOnly); cubeVertexBuffer.SetData<VertexPositionTexture>(vertices.ToArray()); } private void BuildFace(List<VertexPositionTexture> vertices, Vector3 p1, Vector3 p2) { vertices.Add(BuildVertex(p1.X, p1.Y, p1.Z, 1, 0)); vertices.Add(BuildVertex(p1.X, p2.Y, p1.Z, 1, 1)); vertices.Add(BuildVertex(p2.X, p2.Y, p2.Z, 0, 1)); vertices.Add(BuildVertex(p2.X, p2.Y, p2.Z, 0, 1)); vertices.Add(BuildVertex(p2.X, p1.Y, p2.Z, 0, 0)); vertices.Add(BuildVertex(p1.X, p1.Y, p1.Z, 1, 0)); } private void BuildFaceHorizontal(List<VertexPositionTexture> vertices, Vector3 p1, Vector3 p2) { vertices.Add(BuildVertex(p1.X, p1.Y, p1.Z, 0, 1)); vertices.Add(BuildVertex(p2.X, p1.Y, p1.Z, 1, 1)); vertices.Add(BuildVertex(p2.X, p2.Y, p2.Z, 1, 0)); vertices.Add(BuildVertex(p1.X, p1.Y, p1.Z, 0, 1)); vertices.Add(BuildVertex(p2.X, p2.Y, p2.Z, 1, 0)); vertices.Add(BuildVertex(p1.X, p1.Y, p2.Z, 0, 0)); } private VertexPositionTexture BuildVertex(float x, float y, float z, float u, float v) { return new VertexPositionTexture(new Vector3(x, y, z), new Vector2(u, v)); } public void Draw(BasicEffect effect) { foreach (EffectPass pass in effect.CurrentTechnique.Passes) { pass.Apply(); device.SetVertexBuffer(cubeVertexBuffer); device.DrawPrimitives(PrimitiveType.TriangleList, 0, cubeVertexBuffer.VertexCount / 3); } } } The following class is a list that draws the cubes. public class DrawableList<T> : DrawableGameComponent { private BasicEffect effect; private ThirdPersonCam camera; private class Entity { public Vector3 Position { get; set; } public Matrix Orientation { get; set; } public Texture2D Texture { get; set; } } private Cube cube; private List<Entity> entities = new List<Entity>(); public DrawableList(Game game, ThirdPersonCam camera, BasicEffect effect) : base(game) { this.effect = effect; cube = new Cube(game.GraphicsDevice); this.camera = camera; } public void Add(Vector3 position, Matrix orientation, Texture2D texture) { entities.Add(new Entity() { Position = position, Orientation = orientation, Texture = texture }); } public override void Draw(GameTime gameTime) { foreach (var item in entities) { effect.VertexColorEnabled = false; effect.TextureEnabled = true; effect.Texture = item.Texture; Matrix center = Matrix.CreateTranslation(new Vector3(-0.5f, -0.5f, -0.5f)); Matrix scale = Matrix.CreateScale(1f); Matrix translate = Matrix.CreateTranslation(item.Position); effect.World = center * scale * translate; effect.View = camera.view; effect.Projection = camera.proj; effect.FogEnabled = true; effect.FogColor = Color.CornflowerBlue.ToVector3(); effect.FogStart = 1.0f; effect.FogEnd = 50.0f; cube.Draw(effect); } base.Draw(gameTime); } } } There are probably many reasons that my fps is so slow, but I can't seem to figure out how to fix it. I've looked at techcraft as well, but what I have is too specific to what I want the outcome to be to just rewrite everything from scratch

  Read the article

• GCM: onMessage() from GCMIntentService is never called [migrated]

  - by Shrikant

  I am implementing GCM (Google Cloud Messaging- PUSH Notifications) in my application. I have followed all the steps given in GCM tutorial from developer.android.com My application's build target is pointing to Goolge API 8 (Android 2.2 version). I am able to get the register ID from GCM successfully, and I am passing this ID to my application server. So the registration step is performed successfully. Now when my application server sends a PUSH message to my device, the server gets the message as SUCCESS=1 FAILURE=0, etc., i.e. Server is sending message successfully, but my device never receives the message. After searching alot about this, I came to know that GCM pushes messages on port number 5228, 5229 or 5230. Initially, my device and laptop was restricted for some websites, but then I was granted all the permissions to access all websites, so I guess these port numbers are open for my device. So my question is: I never receive any PUSH message from GCM. My onMessage() from GCMIntenService class is never called. What could be the reason? Please see my following code and guide me accordingly: I have declared following in my manifest: <uses-sdk android:minSdkVersion="8" android:targetSdkVersion="8" /> <permission android:name="package.permission.C2D_MESSAGE" android:protectionLevel="signature" /> <!-- App receives GCM messages. --> <uses-permission android:name="com.google.android.c2dm.permission.RECEIVE" /> <!-- GCM connects to Google Services. --> <uses-permission android:name="android.permission.INTERNET" /> <!-- GCM requires a Google account. --> <uses-permission android:name="android.permission.GET_ACCOUNTS" /> <!-- Keeps the processor from sleeping when a message is received. --> <uses-permission android:name="android.permission.WAKE_LOCK" /> <uses-permission android:name="package.permission.C2D_MESSAGE" /> <uses-permission android:name="android.permission.INTERNET" /> <receiver android:name="com.google.android.gcm.GCMBroadcastReceiver" android:permission="com.google.android.c2dm.permission.SEND" > <intent-filter> <action android:name="com.google.android.c2dm.intent.RECEIVE" /> <action android:name="com.google.android.c2dm.intent.REGISTRATION" /> <category android:name="packageName" /> </intent-filter> </receiver> <receiver android:name=".ReceiveBroadcast" android:exported="false" > <intent-filter> <action android:name="GCM_RECEIVED_ACTION" /> </intent-filter> </receiver> <service android:name=".GCMIntentService" /> /** * @author Shrikant. * */ public class GCMIntentService extends GCMBaseIntentService { /** * The Sender ID used for GCM. */ public static final String SENDER_ID = "myProjectID"; /** * This field is used to call Web-Service for GCM. */ SendUserCredentialsGCM sendUserCredentialsGCM = null; public GCMIntentService() { super(SENDER_ID); sendUserCredentialsGCM = new SendUserCredentialsGCM(); } @Override protected void onRegistered(Context arg0, String registrationId) { Log.i(TAG, "Device registered: regId = " + registrationId); sendUserCredentialsGCM.sendRegistrationID(registrationId); } @Override protected void onUnregistered(Context context, String arg1) { Log.i(TAG, "unregistered = " + arg1); sendUserCredentialsGCM .unregisterFromGCM(LoginActivity.API_OR_BROWSER_KEY); } @Override protected void onMessage(Context context, Intent intent) { Log.e("GCM MESSAGE", "Message Recieved!!!"); String message = intent.getStringExtra("message"); if (message == null) { Log.e("NULL MESSAGE", "Message Not Recieved!!!"); } else { Log.i(TAG, "new message= " + message); sendGCMIntent(context, message); } } private void sendGCMIntent(Context context, String message) { Intent broadcastIntent = new Intent(); broadcastIntent.setAction("GCM_RECEIVED_ACTION"); broadcastIntent.putExtra("gcm", message); context.sendBroadcast(broadcastIntent); } @Override protected void onError(Context context, String errorId) { Log.e(TAG, "Received error: " + errorId); Toast.makeText(context, "PUSH Notification failed.", Toast.LENGTH_LONG) .show(); } @Override protected boolean onRecoverableError(Context context, String errorId) { return super.onRecoverableError(context, errorId); } }

  Read the article

• Printing fails after first print with Centos 6 and HP LaserJet P3015dn printer

  - by Gavin Simpson

  Centos 6 recognises and configures a HP LaserJet P3015dn printer connected via USB. This machine is being configured as a small group file/print server. I can print a test page, which is processed/printed correctly. The next time printing is attempted (say printing a second test page), the page is not printed and the printer is set to disabled. The status of the printer is stated as: Stopped - /usr/lib/cups/backend/hp failed in the printer configuration dialogue. /var/log/cups/error_log contains this information (first two lines were there prior to the failed print job) E [24/Jun/2004:09:12:57 +0100] Returning HTTP Forbidden for Resume-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost E [24/Jun/2004:09:20:59 +0100] Returning HTTP Forbidden for CUPS-Delete-Printer (ipp://localhost/printers/HP-LaserJet-P3010-Series) from localhost D [24/Jun/2004:09:37:28 +0100] [Job 28] The following messages were recorded from 09:36:43 AM to 09:37:28 AM D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding start banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] Adding end banner page "none". D [24/Jun/2004:09:37:28 +0100] [Job 28] File of type application/vnd.cups-banner queued by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] hold_until=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Queued on "HP-LaserJet-P3010-Series" by "gavin". D [24/Jun/2004:09:37:28 +0100] [Job 28] job-sheets=none,none D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[0]="HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[1]="28" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[2]="gavin" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[3]="Test Page" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[4]="1" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[5]="job-uuid=urn:uuid:b3370a97-4ab6-3451-40a2-6239b13fa3e1 job-originating-host-name=localhost" D [24/Jun/2004:09:37:28 +0100] [Job 28] argv[6]="/var/spool/cups/d00028-001" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[0]="CUPS_CACHEDIR=/var/cache/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[1]="CUPS_DATADIR=/usr/share/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[2]="CUPS_DOCROOT=/usr/share/cups/www" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[4]="CUPS_REQUESTROOT=/var/spool/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[5]="CUPS_SERVERBIN=/usr/lib/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[6]="CUPS_SERVERROOT=/etc/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[7]="CUPS_STATEDIR=/var/run/cups" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[8]="HOME=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[10]="[email protected]" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[11]="SOFTWARE=CUPS/1.4.2" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[12]="TMPDIR=/var/spool/cups/tmp" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[13]="USER=root" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[14]="CUPS_SERVER=/var/run/cups/cups.sock" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[15]="CUPS_ENCRYPTION=IfRequested" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[16]="IPP_PORT=631" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[17]="CHARSET=utf-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[18]="LANG=en_US.UTF-8" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[19]="PPD=/etc/cups/ppd/HP-LaserJet-P3010-Series.ppd" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[20]="RIP_MAX_CACHE=8m" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[21]="CONTENT_TYPE=application/vnd.cups-banner" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[22]="DEVICE_URI=hp:/usb/HP_LaserJet_P3010_Series?serial=VNBV993GM4" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[23]="PRINTER_INFO=Hewlett-Packard HP LaserJet P3010 Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[24]="PRINTER_LOCATION=electra.geog.ucl.ac.uk" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[25]="PRINTER=HP-LaserJet-P3010-Series" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[26]="CUPS_FILETYPE=document" D [24/Jun/2004:09:37:28 +0100] [Job 28] envp[27]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript" D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/bannertops (PID 2858) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started filter /usr/lib/cups/filter/pstops (PID 2859) D [24/Jun/2004:09:37:28 +0100] [Job 28] Started backend /usr/lib/cups/backend/hp (PID 2860) D [24/Jun/2004:09:37:28 +0100] [Job 28] load_banner(filename="/var/spool/cups/d00028-001") D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] Page = 612x792; 12,12 to 600,780 D [24/Jun/2004:09:37:28 +0100] [Job 28] slow_collate=0, slow_duplex=0, slow_order=0 D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_comments - %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %!PS-Adobe-3.0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%BoundingBox: 12 12 600 780 D [24/Jun/2004:09:37:28 +0100] [Job 28] %cupsRotation: 0 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Creator: bannertops/CUPS v1.4.2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%CreationDate: Thu 24 Jun 2004 09:36:43 AM BST D [24/Jun/2004:09:37:28 +0100] [Job 28] %%LanguageLevel: 2 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentData: Clean7Bit D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Title: (Test Page) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%For: (gavin) D [24/Jun/2004:09:37:28 +0100] [Job 28] %%Pages: 1 D [24/Jun/2004:09:37:28 +0100] [Job 28] %%DocumentSuppliedResources: font Monospace D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Bold D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-BoldOblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%+ font Monospace-Oblique D [24/Jun/2004:09:37:28 +0100] [Job 28] %%EndComments D [24/Jun/2004:09:37:28 +0100] [Job 28] Before copy_prolog - %%BeginProlog D [24/Jun/2004:09:37:28 +0100] [Job 28] STATE: +connecting-to-device D [24/Jun/2004:09:37:28 +0100] [Job 28] prnt/backend/hp.c 762: ERROR: cannot open channel PRINT D [24/Jun/2004:09:37:28 +0100] [Job 28] Backend returned status 1 (failed) D [24/Jun/2004:09:37:28 +0100] [Job 28] Printer stopped due to backend errors; please consult the error_log file for details. D [24/Jun/2004:09:37:28 +0100] [Job 28] End of messages D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state=5(stopped) D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-message="/usr/lib/cups/backend/hp failed" D [24/Jun/2004:09:37:28 +0100] [Job 28] printer-state-reasons=paused /var/log/messages contains the following reports associated with the recognition of the printer and the failed print job: Jun 24 09:35:07 electra kernel: usb 1-8: new high speed USB device using ehci_hcd and address 2 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device found, idVendor=03f0, idProduct=8d17 Jun 24 09:35:07 electra kernel: usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 24 09:35:07 electra kernel: usb 1-8: Product: HP LaserJet P3010 Series Jun 24 09:35:07 electra kernel: usb 1-8: Manufacturer: Hewlett-Packard Jun 24 09:35:07 electra kernel: usb 1-8: SerialNumber: VNBV993GM4 Jun 24 09:35:07 electra kernel: usb 1-8: configuration #1 chosen from 1 choice Jun 24 09:35:07 electra kernel: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x8D17 Jun 24 09:35:07 electra kernel: usbcore: registered new interface driver usblp Jun 24 09:35:07 electra udev-configure-printer: invalid or missing IEEE 1284 Device ID Jun 24 09:35:08 electra hp[1942]: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:09 electra python: io/hpmud/pp.c 627: unable to read device-id ret=-1 Jun 24 09:35:51 electra kernel: usblp0: removed Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 254: unable to read Dot4ReverseReply data: Resource temporarily unavailable exp=2 act=0 Jun 24 09:37:28 electra hp[2860]: io/hpmud/dot4.c 330: invalid DOT4InitReply: cmd=0, result=20#012, revision=0 Jun 24 09:37:28 electra hp[2860]: prnt/backend/hp.c 762: ERROR: cannot open channel PRINT I am now at a loss as to how to proceed to get this printer working on my Centos machine. How can I configure the machine to print more than a single print job without needing to be unplugged/plugged in repeatedly?

  Read the article

• Know More About Oracle Row Lock

  - by Liu Maclean(???)

  ??????Oracle??????????row lock,??ORACLE????????????????????,row lock???????????????????????????????,??Server Process?pin????block buffer????????? ????????,?process A ??update???????? Z?????????, ???????rollback???commit;??Process B??????DML??, ???????rowid???? Z???, ???????????process A????????ITL???,????????cleanout??,????????row???????????commit, ???????Process B????”enq: TX – row lock contention”??????? ????Process B????????????? ?????????Process A???????row,??Process B???????”enq: TX – row lock contention”???? ????????  ????????: SESSION A: SQL> select * from v$version; BANNER ---------------------------------------------------------------- Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bi PL/SQL Release 10.2.0.5.0 - Production CORE    10.2.0.5.0      Production TNS for Linux: Version 10.2.0.5.0 - Production NLSRTL Version 10.2.0.5.0 - Production SQL> select * from global_name; GLOBAL_NAME -------------------------------------------------------------------------------- www.oracledatabase12g.com SQL> create table maclean_lock(t1 int); Table created. SQL> insert into maclean_lock values (1); 1 row created. SQL> commit; Commit complete. SQL> select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from maclean_lock; DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID) ------------------------------------ ------------------------------------                                67642                                    1 SQL>  select distinct sid from v$mystat;        SID ----------        142 SQL> select pid,spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat));        PID SPID ---------- ------------         17 15636 ??SESSION A ????savepoint ,?update ?????????         SQL>  savepoint NONLOCK; Savepoint created. SQL> select * From v$Lock where sid=142; no rows selected SQL> set linesize 140 pagesize 1400 SQL>  update maclean_lock set t1=t1+2; 1 row updated. SQL> select * From v$Lock where sid=142; ADDR             KADDR                   SID TY        ID1        ID2      LMODE    REQUEST      CTIME      BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 0000000091FC69F0 0000000091FC6A18        142 TM      55829          0          3          0          6          0 00000000914B4008 00000000914B4040        142 TX     393232        609          6          0          6          0         SQL> select dump(3,16) from dual; DUMP(3,16) -------------------------------------------------------------------------------- Typ=2 Len=2: c1,4 ALTER SYSTEM DUMP DATAFILE 1 BLOCK 67642;  Object id on Block? Y  seg/obj: 0xda16  csc: 0x00.234718  itc: 2  flg: O  typ: 1 - DATA      fsl: 0  fnx: 0x0 ver: 0x01  Itl           Xid                  Uba         Flag  Lck        Scn/Fsc 0x01   0x000a.00f.000001e0  0x00800075.02a6.29  C---    0  scn 0x0000.00234711 0x02   0x0007.018.000001fe  0x0080065c.017a.02  ----    1  fsc 0x0000.00000000 data_block_dump,data header at 0x81d185c =============== tsiz: 0x1fa0 hsiz: 0x14 pbl: 0x081d185c bdba: 0x0041083a      76543210 flag=-------- ntab=1 nrow=1 frre=-1 fsbo=0x14 fseo=0x1f9a avsp=0x1f83 tosp=0x1f83 0xe:pti[0]      nrow=1  offs=0 0x12:pri[0]     offs=0x1f9a block_row_dump: tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x2  cc: 1 col  0: [ 2]  c1 04 end_of_block_dump ?? BLOCK DUMP ???? ??????XID=0x0007.018.000001fe ?transaction?? lb:0x1 ??SESSION B ,?????UPDATE?? ???enq: TX - row lock contention ?? SQL> select distinct sid from v$mystat;        SID ----------        140 SQL> select pid,spid from v$process where addr = ( select paddr from v$session where sid=(select distinct sid from v$mystat));        PID SPID ---------- ------------         24 15652 SQL> alter system set "_trace_events"='10000-10999:255:24'; System altered.         SQL> update maclean_lock set t1=t1+2; select * From v$Lock where sid=142 or sid=140 order by sid; SESSION C: SQL> select * From v$Lock where sid=142 or sid=140 order by sid; ADDR             KADDR                   SID TY        ID1        ID2      LMODE    REQUEST      CTIME      BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 0000000091FC6B10 0000000091FC6B38        140 TM      55829          0          3          0         84          0 00000000924F4A58 00000000924F4A78        140 TX     458776        510          0          6         84          0 00000000914B51E8 00000000914B5220        142 TX     458776        510          6          0        312          1 0000000091FC69F0 0000000091FC6A18        142 TM      55829          0          3          0        312          0 ???? SESSION B SID=140 ?SESSION A ?TX ENQUEUE ?X mode?REQUEST SQL> oradebug dump systemstate 266; Statement processed. SESSION B waiter's enqueue lock       SO: 0x924f4a58, type: 5, owner: 0x92bb8dc8, flag: INIT/-/-/0x00       (enqueue) TX-00070018-000001FE    DID: 0001-0018-00000022       lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  res_flag: 0x6       req: X, lock_flag: 0x0, lock: 0x924f4a78, res: 0x925617c0       own: 0x92b76be0, sess: 0x92b76be0, proc: 0x92a737a0, prv: 0x925617e0 TX-00070018-000001FE=> TX 458776 510 SESSION A owner's enqueue lock       SO: 0x914b51e8, type: 40, owner: 0x92b796d0, flag: INIT/-/-/0x00       (trans) flg = 0x1e03, flg2 = 0xc0000, prx = 0x0, ros = 2147483647 bsn = 0xed5 bndsn = 0xee7 spn = 0xef7       efd = 3       file:xct.c lineno:1179       DID: 0001-0011-000000C2       parent xid: 0x0000.000.00000000       env: (scn: 0x0000.00234718  xid: 0x0007.018.000001fe  uba: 0x0080065c.017a.02  statement num=0  parent xid: xid: 0x0000.000.00000000  scn: 0x00 00.00234718 0sch: scn: 0x0000.00000000)       cev: (spc = 7818  arsp = 914e8310  ubk tsn: 1 rdba: 0x0080065c  useg tsn: 1 rdba: 0x00800069             hwm uba: 0x0080065c.017a.02  col uba: 0x00000000.0000.00             num bl: 1 bk list: 0x91435070)             cr opc: 0x0 spc: 7818 uba: 0x0080065c.017a.02       (enqueue) TX-00070018-000001FE    DID: 0001-0011-000000C2       lv: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  res_flag: 0x6       mode: X, lock_flag: 0x0, lock: 0x914b5220, res: 0x925617c0       own: 0x92b796d0, sess: 0x92b796d0, proc: 0x92a6ffd8, prv: 0x925617d0        xga: 0x8b7c6d40, heap: UGA       Trans IMU st: 2 Pool index 65535, Redo pool 0x914b58d0, Undo pool 0x914b59b8       Redo pool range [0x86de640 0x86de640 0x86e0e40]       Undo pool range [0x86dbe40 0x86dbe40 0x86de640]         ----------------------------------------         SO: 0x91435070, type: 39, owner: 0x914b51e8, flag: -/-/-/0x00         (List of Blocks) next index = 1         index   itli   buffer hint   rdba       savepoint         -----------------------------------------------------------             0      2   0x647f1fc8    0x41083a     0xee7 ?SESSION A? ROLLBACK ?savepoint: SQL> rollback to NONLOCK; Rollback complete. ????savepoint ??update??????? ??UPDATE???????? ROLLBACK: SQL> select * From v$Lock where sid=142 or sid=140; ADDR             KADDR                   SID TY        ID1        ID2      LMODE    REQUEST      CTIME      BLOCK ---------------- ---------------- ---------- -- ---------- ---------- ---------- ---------- ---------- ---------- 00000000924F4A58 00000000924F4A78        140 TX     458776        510          0          6        822          0 0000000091FC6B10 0000000091FC6B38        140 TM      55829          0          3          0        822          0 00000000914B51E8 00000000914B5220        142 TX     458776        510          6          0       1050          1 ???? SESSION A 142 ???SAVEPOINT ???????TM LOCK ????? ROLLBACK TO SAVEPOINT?????SESSION???TX LOCK!!!! ??????SESSION 142???TX ID1=458776 ID2=510, ????ROLLBACK TO SAVEPOINT?????????ABORT TRANSACTION ?? SESSION B  SID=140??  SESSION A ?? , ?????????SESSION B? update???HANG?? ?????????CACHE?????:  Object id on Block? Y  seg/obj: 0xda16  csc: 0x00.2347b7  itc: 2  flg: O  typ: 1 - DATA      fsl: 0  fnx: 0x0 ver: 0x01  Itl           Xid                  Uba         Flag  Lck        Scn/Fsc 0x01   0x000a.00f.000001e0  0x00800075.02a6.29  C---    0  scn 0x0000.00234711 0x02   0x0000.000.00000000  0x00000000.0000.00  ----    0  fsc 0x0000.00000000 data_block_dump,data header at 0x745d85c =============== tsiz: 0x1fa0 hsiz: 0x14 pbl: 0x0745d85c bdba: 0x0041083a      76543210 flag=-------- ntab=1 nrow=1 frre=-1 fsbo=0x14 fseo=0x1f9a avsp=0x1f83 tosp=0x1f83 0xe:pti[0]      nrow=1  offs=0 0x12:pri[0]     offs=0x1f9a block_row_dump: tab 0, row 0, @0x1f9a tl: 6 fb: --H-FL-- lb: 0x0  cc: 1 col  0: [ 2]  c1 02 end_of_block_dump ???? ITL=0x02? ?????????,col  0: [ 2]  c1 02 ????????? ?????????SESSION D ,??????row lock?? ?UPDATE???????? SESSION D: SQL> update maclean_lock set t1=t1+2; 1 row updated. SQL> rollback; Rollback complete. ??SESSION B ??????????? ?????ORACLE????????, ??????????? TX lock?? row lock , ????????2??? row lock?????????, ?TX lock????????ENQUEUE LOCK???? ?????????PROCESS K?DML???????????????????????,??????????TX LOCK, ????PROCESS Z?????????????????????????ROW LOCK????????, ???????OLTP?????????????????????? ??ROW LOCK?Release ??????TX?ENQUEUE LOCK,?????????Process J ????????????, Process K??????????? ,Process K?????????,???row piece?lb??0x0 ,?????ITL, Process Z???ITL???????Process J????XID,?????Process J?????TX lock, PROCESS K ???TX resource?Enqueue Waiter Linked List?????X mode(exclusive)?enqueue lock? ???Process J??TX lock?,Process J?????TX resource?Enqueue Waiter Linked List ???Process K??????,??POST?????Process K? TX lock??????, ???????row lock???????,????????? ?????????? ?????: SESSION A ???PID =17 ?????????????????? SESSION B ???PID =24 ??????? "_trace_events"='10000-10999:255:24';  KST trace ??????? Server Process??? SESSION A PID=17  ?? acqure?SX mode???TM Lock ,?? ????Transaction?????UNDO SEGMENT 7,???XID 7.24.510, ?acquire ?X mode? TX-00070018-000001fe ? ?????? 00070018-000001fe ???? 7- 24 - 510? XID ? 781F4B8A:007A569C    17   142 10704  83 ksqgtl: acquire TM-0000da15-00000000 mode=SX flags=GLOBAL|XACT why="contention" 781F4B92:007A569D    17   142 10704  19 ksqgtl: SUCCESS 781F4BB3:007A569E    17   142 10812   2 0x000000000041083A 0x0000000000000000 0x0000000000234717 781F4BBA:007A569F    17   142 10812   3 0x0000000000000000 0x0000000000000000 0x0000000000000000 781F4BC0:007A56A0    17   142 10812   4 0x0000000000000000 0x0000000000000000 0x0000000000000000 781F4BD3:007A56A1    17   142 10812   5 0x000000000041083A 0x0000000000000000 0x0000000000000000 781F4BFE:007A56A2    17   142 10811   1 0x000000000041083A 0x0000000000000000 0x0000000000234711 0x0000000000000002 781F4C06:007A56A3    17   142 10811   2 0x000000000041083A 0x0000000000000000 0x0000000000234718 0x00007FA074EDA560 781F4C26:007A56A4    17   142 10813   1 ktubnd: Bind usn 7 nax 1 nbx 0 lng 0 par 0 781F4C43:007A56A5    17   142 10813   2 ktubnd: Txn Bound xid: 7.24.510 781F4C4A:007A56A6    17   142 10704  83 ksqgtl: acquire TX-00070018-000001fe mode=X flags=GLOBAL|XACT why="contention" 781F4C51:007A56A7    17   142 10704  19 ksqgtl: SUCCESS ?????????? ???????? 781F4CBF:007A56A8    17   142 10005   1 KSL WAIT BEG [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 781F4CCC:007A56A9    17   142 10005   2 KSL WAIT END [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 time=13 781F4CDE:007A56AA    17   142 10005   1 KSL WAIT BEG [SQL*Net message from client] 1650815232/0x62657100 1/0x1 0/0x0 786BD85D:007A57E0    17   142 10005   2 KSL WAIT END [SQL*Net message from client] 1650815232/0x62657100 1/0x1 0/0x0 time=5016447 786BD966:007A57E1    17   142 10005   1 KSL WAIT BEG [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 786BD96E:007A57E2    17   142 10005   2 KSL WAIT END [SQL*Net message to client] 1650815232/0x62657100 1/0x1 0/0x0 time=8 SESSION B ???PID =24  ,??????? SX mode? TM lock,??row lock? acquire X mode?TX-00070018-000001fe ksqgtl: acquire TM-0000da15-00000000 mode=SX flags=GLOBAL|XACT why="contention" ksqgtl: SUCCESS 0x000000000041083A 0x0000000000000000 0x00000000002354F8 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000041083A 0x0000000000000000 0x00000000002354F8 0x0000000000000001 0x000000000041083A 0x0000000000000000 0x00000000002354F8 0x0000000008A63780 0x0000000000000001 0x0000000000800861 0x0000000000000241 0x0000000000000001 0x000000000041083A 0x0000000000000001 0x0000000000000001 0x000000000041083A 0x0000000000000000 0x00000000002354F9 0x0000000000000002 ksqgtl: acquire TX-00070018-000001fe mode=X flags=GLOBAL|LONG why="row lock contention" C4048EBD:007F52B6    24   140 10005   2 KSL WAIT END [enq: TX - row lock contention] 1415053318/0x54580006 458776/0x70018 510/0x1fe time=2929879 C4048ED4:007F52B7    24   140 10005   1 KSL WAIT BEG [enq: TX - row lock contention] 1415053318/0x54580006 458776/0x70018 510/0x1fe C43146CA:007F535E    24   140 10005   2 KSL WAIT END [enq: TX - row lock contention] 1415053318/0x54580006 458776/0x70018 510/0x1fe time=2930676 ????????? ,PID=24 ??????ksqcmi???????? deadlock C43146D9:007F535F    24   140 10704 134 ksqcmi: performing local deadlock detection on TX-00070018-000001fe C43146F8:007F5360    24   140 10704 150 ksqcmi: deadlock not detected on TX-00070018-000001fe ?? ??? PID 17 ??ROLLBACK ???? ,????????: PID 17 ROLLBACK; D7A495BB:007F9D3E    17   142 10005   4 KSL POST SENT postee=24 loc='ksqrcl' id1=0 id2=0 name=   type=0 D7A495D8:007F9D3F    17   142 10444  12 ABORT TRANSACTION - xid: 0x0007.018.000001fe ??  PID 17 ??? TX resource?Enqueue Waiter linked List ???PID 24???,????KSL POST SENT ?? PID 24, ???ksqrcl???ENQUEUE LOCK ?PID 24??????KSL POST (KSL POST RCVD poster=17), ?ksqgtl???? TX-00070018-000001fe ?? ksqrcl??, ??PID 24???????? TX lock?USN ,??????? USN 3 XID 3.11.582 ,???acquire TX-0003000b-00000246 D7A49616:007F9D41    24   140 10005   3 KSL POST RCVD poster=17 loc='ksqrcl' id1=0 id2=0 name=   type=0 fac#=0 facpost=1 D7A4961C:007F9D42    24   140 10704  19 ksqgtl: SUCCESS D7A4967D:007F9D43    24   140 10704 117 ksqrcl: release TX-00070018-000001fe mode=X D7A496A5:007F9D44    24   140 10813   1 ktubnd: Bind usn 3 nax 1 nbx 0 lng 0 par 0 D7A496C2:007F9D45    24   140 10813   2 ktubnd: Txn Bound xid: 3.11.582 D7A496C7:007F9D46    24   140 10704  83 ksqgtl: acquire TX-0003000b-00000246 mode=X flags=GLOBAL|XACT why="contention" D7A496E4:007F9D47    24   140 10704  19 ksqgtl: SUCCESS ROW LOCK?Release ??????TX?ENQUEUE LOCK,?????????Process J ????????????, Process K??????????? ,Process K?????????,???row piece?lb??0×0 ,?????ITL,Process Z???ITL???????Process J????XID,?????Process J?????TX lock,PROCESS K ???TX resource?Enqueue Waiter Linked List?????X mode(exclusive)?enqueue lock? ???Process J??TX lock?,Process J?????TX resource?Enqueue Waiter Linked List ???Process K??????,??POST?????Process K? TX lock??????,???????row lock???????,?????????

  Read the article

• Abstracting the adding of click events to elements selected by class using jQuery

  - by baroquedub

  I'm slowly getting up to speed with jQuery and am starting to want to abstract my code. I'm running into problems trying to define click events at page load. In the code below, I'm trying to run through each div with the 'block' class and add events to some of its child elements by selecting them by class: <script language="javascript" type="text/javascript"> $(document).ready(function (){ $('HTML').addClass('JS'); // if JS enabled, hide answers $(".block").each(function() { problem = $(this).children('.problem'); button = $(this).children('.showButton'); problem.data('currentState', 'off'); button.click(function() { if ((problem.data('currentState')) == 'off'){ button.children('.btn').html('Hide'); problem.data('currentState', 'on'); problem.fadeIn('slow'); } else if ((problem.data('currentState')) == 'on'){ button.children('.btn').html('Solve'); problem.data('currentState', 'off'); problem.fadeOut('fast'); } return false; }); }); }); </script> <style media="all" type="text/css"> .JS div.problem{display:none;} </style> <div class="block"> <div class="showButton"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem"> <p>Answer 1</p> </div> </div> <div class="block"> <div class="showButton"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem"> <p>Answer 2</p> </div> </div> Unfortunately using this, only the last of the divs' button actually works. The event is not 'localised' (if that's the right word for it?) i.e. the event is only applied to the last $(".block") in the each method. So I have to laboriously add ids for each element and define my click events one by one. Surely there's a better way! Can anyone tell me what I'm doing wrong? And how I can get rid of the need for those IDs (I want this to work on dynamically generated pages where I might not know how many 'blocks' there are...) <script language="javascript" type="text/javascript"> $(document).ready(function (){ $('HTML').addClass('JS'); // if JS enabled, hide answers // Preferred version DOESN'T' WORK // So have to add ids to each element and laboriously set-up each one in turn... $('#problem1').data('currentState', 'off'); $('#showButton1').click(function() { if (($('#problem1').data('currentState')) == 'off'){ $('#showButton1 > a').html('Hide'); $('#problem1').data('currentState', 'on'); $('#problem1').fadeIn('slow'); } else if (($('#problem1').data('currentState')) == 'on'){ $('#showButton1 > a').html('Solve'); $('#problem1').data('currentState', 'off'); $('#problem1').fadeOut('fast'); } return false; }); $('#problem2').data('currentState', 'off'); $('#showButton2').click(function() { if (($('#problem2').data('currentState')) == 'off'){ $('#showButton2 > a').html('Hide'); $('#problem2').data('currentState', 'on'); $('#problem2').fadeIn('slow'); } else if (($('#problem2').data('currentState')) == 'on'){ $('#showButton2 > a').html('Solve'); $('#problem2').data('currentState', 'off'); $('#problem2').fadeOut('fast'); } return false; }); }); </script> <style media="all" type="text/css"> .JS div.problem{display:none;} </style> <div class="block"> <div class="showButton" id="showButton1"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem" id="problem1"> <p>Answer 1</p> </div> </div> <div class="block"> <div class="showButton" id="showButton2"> <a href="#" title="Show solution" class="btn">Solve</a> </div> <div class="problem" id="problem2"> <p>Answer 2</p> </div> </div>

  Read the article

• Handling file upload in a non-blocking manner

  - by Kaliyug Antagonist

  The background thread is here Just to make objective clear - the user will upload a large file and must be redirected immediately to another page for proceeding different operations. But the file being large, will take time to be read from the controller's InputStream. So I unwillingly decided to fork a new Thread to handle this I/O. The code is as follows : The controller servlet /** * @see HttpServlet#doPost(HttpServletRequest request, HttpServletResponse * response) */ protected void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException { // TODO Auto-generated method stub System.out.println("In Controller.doPost(...)"); TempModel tempModel = new TempModel(); tempModel.uploadSegYFile(request, response); System.out.println("Forwarding to Accepted.jsp"); /*try { Thread.sleep(1000 * 60); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); }*/ request.getRequestDispatcher("/jsp/Accepted.jsp").forward(request, response); } The model class package com.model; import java.io.IOException; import java.util.concurrent.ExecutionException; import java.util.concurrent.Future; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import com.utils.ProcessUtils; public class TempModel { public void uploadSegYFile(HttpServletRequest request, HttpServletResponse response) { // TODO Auto-generated method stub System.out.println("In TempModel.uploadSegYFile(...)"); /* * Trigger the upload/processing code in a thread, return immediately * and notify when the thread completes */ try { FileUploaderRunnable fileUploadRunnable = new FileUploaderRunnable( request.getInputStream()); /* * Future<FileUploaderRunnable> future = ProcessUtils.submitTask( * fileUploadRunnable, fileUploadRunnable); * * FileUploaderRunnable processed = future.get(); * * System.out.println("Is file uploaded : " + * processed.isFileUploaded()); */ Thread uploadThread = new Thread(fileUploadRunnable); uploadThread.start(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } /* * catch (InterruptedException e) { // TODO Auto-generated catch block * e.printStackTrace(); } catch (ExecutionException e) { // TODO * Auto-generated catch block e.printStackTrace(); } */ System.out.println("Returning from TempModel.uploadSegYFile(...)"); } } The Runnable package com.model; import java.io.File; import java.io.FileInputStream; import java.io.FileNotFoundException; import java.io.FileOutputStream; import java.io.IOException; import java.io.InputStream; import java.nio.ByteBuffer; import java.nio.channels.Channels; import java.nio.channels.ReadableByteChannel; public class FileUploaderRunnable implements Runnable { private boolean isFileUploaded = false; private InputStream inputStream = null; public FileUploaderRunnable(InputStream inputStream) { // TODO Auto-generated constructor stub this.inputStream = inputStream; } public void run() { // TODO Auto-generated method stub /* Read from InputStream. If success, set isFileUploaded = true */ System.out.println("Starting upload in a thread"); File outputFile = new File("D:/06c01_output.seg");/* * This will be changed * later */ FileOutputStream fos; ReadableByteChannel readable = Channels.newChannel(inputStream); ByteBuffer buffer = ByteBuffer.allocate(1000000); try { fos = new FileOutputStream(outputFile); while (readable.read(buffer) != -1) { fos.write(buffer.array()); buffer.clear(); } fos.flush(); fos.close(); readable.close(); } catch (FileNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } System.out.println("File upload thread completed"); } public boolean isFileUploaded() { return isFileUploaded; } } My queries/doubts : Spawning threads manually from the Servlet makes sense to me logically but scares me coding wise - the container isn't aware of these threads after all(I think so!) The current code is giving an Exception which is quite obvious - the stream is inaccessible as the doPost(...) method returns before the run() method completes : In Controller.doPost(...) In TempModel.uploadSegYFile(...) Returning from TempModel.uploadSegYFile(...) Forwarding to Accepted.jsp Starting upload in a thread Exception in thread "Thread-4" java.lang.NullPointerException at org.apache.coyote.http11.InternalInputBuffer.fill(InternalInputBuffer.java:512) at org.apache.coyote.http11.InternalInputBuffer.fill(InternalInputBuffer.java:497) at org.apache.coyote.http11.InternalInputBuffer$InputStreamInputBuffer.doRead(InternalInputBuffer.java:559) at org.apache.coyote.http11.AbstractInputBuffer.doRead(AbstractInputBuffer.java:324) at org.apache.coyote.Request.doRead(Request.java:422) at org.apache.catalina.connector.InputBuffer.realReadBytes(InputBuffer.java:287) at org.apache.tomcat.util.buf.ByteChunk.substract(ByteChunk.java:407) at org.apache.catalina.connector.InputBuffer.read(InputBuffer.java:310) at org.apache.catalina.connector.CoyoteInputStream.read(CoyoteInputStream.java:202) at java.nio.channels.Channels$ReadableByteChannelImpl.read(Unknown Source) at com.model.FileUploaderRunnable.run(FileUploaderRunnable.java:39) at java.lang.Thread.run(Unknown Source) Keeping in mind the point 1., does the use of Executor framework help me in anyway ? package com.utils; import java.util.concurrent.Future; import java.util.concurrent.ScheduledThreadPoolExecutor; public final class ProcessUtils { /* Ensure that no more than 2 uploads,processing req. are allowed */ private static final ScheduledThreadPoolExecutor threadPoolExec = new ScheduledThreadPoolExecutor( 2); public static <T> Future<T> submitTask(Runnable task, T result) { return threadPoolExec.submit(task, result); } } So how should I ensure that the user doesn't block and the stream remains accessible so that the (uploaded)file can be read from it?

  Read the article

• How can I configure Symantec Endpoint Protection Agent to allow access to windows shares?

  - by Peter Bernier

  I'm having some difficulties exposing a standard windows file share on a Windows Embedded Standard 2009 device that is running Symantec Endpoint Protection Agent 5.1. I'm using simply file sharing to expose a particular directory. That share is visible locally on the machine and externally visible when I disable the endpoint protection agent. I've added a rule (and moved it to the to ensure priority) allowing all hosts access on TDP ports 137,138,138,445 and another rule allowing UDP access on ports 137,138,139. When I try to connect, two endpoint protection dialogs pop up saying: Traffic has been blocked from this application: NWLINK2 IPX Protocol Driver (nwlnkipx.sys) Traffic has been blocked from this application: IPv6 driver (tcpip6.sys) I'm not using IPv6 anywhere. Interestingly, I discovered a workaround in that I can white-list all traffic from the subnet the device is on, which meets my needs, but I'm still curious as to why my original approach wasn't successful. Can anyone suggestion a reason why the above endpoint protection rules won't allow me to access windows file shares on the device?

  Read the article

< Previous Page | 149 150 151 152 153 154 155 156 157 158 159 160  | Next Page >