Search Results

Search found 8344 results on 334 pages for 'checked stl'.

Page 157/334 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• How to charge an iPhone on a Windows PC without Installing iTunes

  - by Martin Hollingsworth

  I want to be able to charge my iPhone on my work computer, which is running Windows Server 2008 SP1 64-Bit. When I plug the iPhone in with the USB cable, it will not charge. Windows attempts to locate a driver for the device but only comes up with a generic Camera device and even if I allow that to be installed, the iPhone still does not charge. I have checked the computer's BIOS settings and did not find anything relating to power on the USB devices. I also tried this on ports at the back of the computer in addition to those on the front. The PC is a Dell Optiplex 780. As far as I can tell USB devices do not charge unless Windows has installed an appropriate driver. Since it is a work computer I do not want to install iTunes which does include a driver. I have a workaround that I will post as an answer for reference.

  Read the article

• Server error at large posts

  - by Shirko

  On a large drupal site, the database server is on a separate server connected directly to the web server. The web server uses apache and memcached. The problem is that whenever the post is a large, say larger than 10KB, the server does not return correctly. I checked both apache and mysql logs but could not find any trace of errors being logged. The error happens also when I use nginx/php5-fpm instead of apache. Despite this, the large posts are registered, however incorrectly so that they show up for admin when I open a new page on the site. I'm really confused and appreciate your hints to pinpoint the possible sources if this chronic problem.

  Read the article

• Using Hamachi VPN to connect to Linux VM at home

  - by Cameron Verotti

  I have a CentOS 5.10 Linux box at home running on VMWare, with Windows 2008 as the host. I have set up a Hamachi VPN so that I can connect to the Host server from work, I attempted to add a second VNIC to the VM and bridged it to the hamachi Network Interface. I spun up the VM and checked eth1 with ifconfig and its throwing me a ipv6 address not a ipv4. I want to hook this VM up so that I can run a ssh command from work to the VM. MY network at home is all on Local 198.168.. hence the need to make a VPN network like Hamachi. I cannot seem to find anything that tells me or helps me with tunneling my Linux VM via Hamachi. Any help would be fantastic!

  Read the article

• How can we tell what driven the Private bytes spiking.

  - by ronin

  I have websites running on .Net Framework 2.0 environment. For recent every day my website becomes slow at certain time and I need to recycle my app pool. I checked the log file found that the private bytes will spike during that time slot. Through some research I already know that the managed code and unmanaged code consists of Privates and we can identify which one cause the spike based on "Bytes in all heaps" counter. But I can't find a way to dig deeper. Is there any way that I can find out what driven my private bytes spike? How can we see what the private bytes are being used for? Thanks, Ronin

  Read the article

• Can a Linux system crash cause network issues?

  - by Supratik

  I have a Ubuntu box in my network which crashed, all the system connected to the switch in which the Ubuntu system was connected started giving problem. I removed that system from the network, since that was the last change I made in my network and everything was fine. So, to confirm this I again connected the system back to the network and the same network outage happened. When I checked the links it was fine. When I rebooted the problematic system and again connected back to the network switch everything started working. I think possibly the crash of the Ubuntu system could have caused this outage. Is there any possibility that a kernel crash can cause network issues?

  Read the article

• Can't type text into table cell when form is protected in Word 2002

  - by Gus

  I created several tables in an Word 2002 document to act as a form for users to fill out. In some cells I added check boxes and dropdown lists for people to select options from. When I click on the Protect form button the check boxes and dropdowns become active; however, I can't type anything in the other cells. If I click in an empty cell it automatically moves to the next checkbox. When I unprotect the form then I can type in the empty cells but then checkboxes and dropdowns become useless. I know that the user can double click on the checkbox and then manually select to have it checked, but they can't do this with the dropdowns. What do I have to do to allow the user to type in responses to the tables cells and also select answers from checkboxes and dropdowns? Thanks!

  Read the article

• How to recover Windows Vista product key?

  - by empi

  Two years ago I've bought asus laptop with Windows Vista preinstalled. I also received recovery dvd with it. Now, I want to reinstall Windows and fully format the hard drive. However, the sticker with Windows product key under the laptop is unreadable. I tried recovering the key with ProduKey and similar software but they show another product key - it is different than the one from the sticker (I checked on another asus laptop and on my dell laptop). Do you know if I it is possible to reinstall the operating system with the product key obtained from ProduKey? If not, how can I retrieve the product key? It seems stupid that it was only placed on the sticker that is destroyed after some time if you frequently hold the laptop on your lap. I've tried ProduKey and Recover Keys and they show the same key. However, it's not the one from the sticker. Thanks in advance for help.

  Read the article

• Can only connect to sql server express 2012 via named pipes

  - by YetAnotherDeveloper

  I have sql server express 2012 installed on windows 2008, locally everything works just fine i can connect via tcpip and named pipes. Remotely i can connect with ssms only using named pipes. I have tried disabling the firewall on both sides to eliminate blocking traffic. i have toggled the tcpip setting on and off (i read somewhere that they got it working just but flipping them off and back on). I have double/triple checked all the settings that i'm aware of and everything seems to be correct. Tcp is enabled Tcp port is set to 1433, udp port is set to 1434 Server has static ip Start up log says: Server is listening on [ 'any' 1433]. Firewall rules are in place Any suggestions on things that i can look into? i have really just run out of ideas.

  Read the article

• Windows: Is there something to see and remotely control single(!) windows on a remote PC?

  - by Horst Walter

  Is there something where I can see and control single(!) windows of PC1 on PC2 remotely. Basically like it is possible with X-Windows. I am not talking / asking about A software which displays the whole desktop remotely (like VNC, Windows RDP). A X-windows server for windows, to connect to Linux. The answer here ( Windows Remote Desktop Connection for just a single window (or a single program) ) requires Windows Server 2008. I need to run this on two Windows 7 machines. Example: PC1 shows three windows, and I transfer, see, and control window 2 on PC2. -- Edit -- I have checked whether there is an X-Server for Windows <- Windows. But there seems not to be one other than Unix <- Windows: http://stackoverflow.com/questions/40453/what-is-a-good-and-free-x-server-for-windows

  Read the article

• Can't install Ubuntu 12 into VirtualBox (USB not recognized, ISO would not boot)

  - by wvxvw

  I'm trying out VirtualBox 4.18 and wanted to install Ubuntu 12 as a test. After installing VirtualBox (on Debian squeeze/sid), creating a virtual machine for Ubuntu and pointing it in Settings Storage IDE Controllers to the ISO with the proper version of Ubuntu, checked the "Live CD" option. Tried to define the IDE as master / slave, primary / secondary - all to no effect, and trying to boot this system, I'm getting to the screen which says: FATAL: could not read from the boot medium! System halted I've copied the same ISO to the USB stick, and I can boot from the USB (outside VirtualBox). I've looked at couple of tutorials / walk-through, there's nothing I can see that I would've done wrong. So, how would I configure it to boot from the desired ISO? Below is the snapshot with the current settings (sorry, I don't know how to get them as text).

  Read the article

• Windows 7 Pro x64 suffering from insomnia

  - by gemisigo

  My Win 7 Pro x64 is unable to enter sleep mode. Pressing the sleep button results in strange state where the computer starts entering the sleep mode, the display is turned off but then the whole process stops, it does not switch off the hdd, the keyboard still responds to numlock/capslock, but the display does not on anymore. I have to cut power and restart. If I remove everything (wireless mouse, external hdd, usb hub, etc.) it does enter sleep mode, but if there is something left, it does not, though every one of them has "Allow the computer to turn off this device..." checked and "Allow this device to wake the computer" unchecked. Why does it not work? It was working properly in the RC.

  Read the article

• /dev/shm (shared memory) on linux

  - by Kirzilla

  Hello, Let's imagine that we have 8Gb of RAM on server. I'm mounting /dev/shm with 4Gb on board. mount -o remount,size=4G /dev/shm Will this memory be strictly reserved for shared memory or if /dev/shm is empty this memory could be used by regular applications (web server, php etc.)? PS:Sorry for my English. I'm asking it because I've just checked df -h and found tmpfs 6.0G 0 6.0G 0% /dev/shm on 8Gb RAM sever. I don't know who made this setup, but it seems to me awful. Thank you!

  Read the article

• Can't access internet with 32-bit browser(Chrome, FF, IE)! The 64-bit version of IE on Win 7 works f

  - by Sarveshwar

  I had installed Kaspersky AV 2010 two days ago. Everything was fine until I was not able to access the internet a few minutes back with the 32 bit browsers I have installed - Chrome, Firefox and the 32 bit IE. Then I see that utorrent is working fine!! So again I checked with the 64 bit IE and I could access the internet. I am currently using IE 64 bit to access superuser. Please help! I have uninstalled the KAV 2010. I thought that was the problem. Is this any virus or something? Also, whenever any browser (except IE 64), the screen freezes. Nothing except the browser works! And after the browser is closed, everything comes back to normal. Thanks!

  Read the article

• cdrom drive doesn't work on laptop

  - by bozdoz

  Here's as best as I can describe it: When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time. In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer. In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount. If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.

  Read the article

• Lots of files being used by blank web page. What are they?

  - by byronyasgur

  I am trying to optimise a website and I was using the network waterfall facility in Google Chrome. When I looked at the results there were lots of files which I didnt recognise. I first thought they might be something to do with Google Chrome itself, so I put a blank HTML file on my desktop and checked but there was nothing in the waterfall except the file itself. So I put a blank file on my server and I got the output below. What are all these files, are they all necessary, is this normal and do I need to be in any way concerned. My hosting provider has always been excellent in every regard that I'm aware of. My host is shared hosting, using cpanel and is based on a LAMP server. I also note that a couple of those file have problems but I have no idea how to fault find that or whether it's a concern. EDIT: I have cleared the cache so I don't think it's a browser cache issue.

  Read the article

• Access requires a username and password

  - by articles

  Access requires a username and password Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection) I am getting this above message. I have hosted a website in godaddy hosting space. But when i run it.. it is prompt for User name and Password (above message). I am not using windows authentications in my website.... Moreover, i have test my website code on testing server....it never prompts for this message unless Integrated Windows Authentication is checked. Any help is appreciated.. Thanks

  Read the article

• Wireshark Not Displaying Packets From Other Network Devices, Even in Promisc Mode

  - by eb80

  System Setup: 1. MacBook running Mountain Lion. 2. Wireshark installed and capturing packets (I have "capture all in promiscuous mode" checked) 3. I filter out all packets with my source and destination IP using the following filter ("ip.dst != 192.168.1.104 && ip.src != 192.168.1.104") 4. On the same network as the MacBook, I use an Android device (connecting via WiFi) to make HTTP requests. Expected Results: 1. Wireshark running on the MacBook sees the HTTP request from the Android device. Actual Results: 1. I only see SSDP broadcasts from 192.168.1.1 Question: What do I need to do so that Wireshark, like Firesheep, can see and use the packets (particularly HTTP) from other network devices on the same network?

  Read the article

• Issue about mapping MAC address to Ipv6 address

  - by deepsky

  I know that the address in ipv6 with prefix range 001 to 111 should use a 64-bit interface identifier that follows the EUI-64 format, which translates the MAC to ipv6 as below. MAC:00-02-b3-1e-83-29 --> 02-02-b3-ff-fe-1e-83-29 --->ipv6 addr: fe80::202:b3ff:fe1e:8329 Then I checked my network status with ipconfig /all on my windows XP, but it seems my ipv6 address doesn't follow the above rule: MAC:00-24-81-XX-XX-XX ipv6 addr:2001:da8:8006:225:0:24:81XX:XXXX Obviously it doesn't follow the EUI-64 format. Instead it just directly use the MAC as the last 8 bytes. Anyone know the reason? Pls Correct me if I am wrong.

  Read the article

• Web server suddenly stopped working

  - by wezten

  I have a web server, which was working fine. It also was an FTP server and a Windows Remote Desktop server, all working fine. Someone called our ISP to increase the internet speed, and suddenly nothing works - I can connect with Teamviewer, but HTTP, FTP & RD doesn't work. Disabled firewall. Ran Wireshark - the packets don't come through at all. Set the webserver to port 20111, in case the ISP is blocking port 80, and again, the packets didn't come through at all. (localhost:20111 works fine) Port forwarding is set up for ports 80, 21, 3389 & 20111 to 10.0.0.32 (which is the correct address - checked with ipconfig). Restarted router and computer. I would be very grateful for any help.

  Read the article

• how to set up domain name, bad request invalid hostname

  - by user45645

  assume i have a domain name which will be forwarded to my public ip (web server) automatically. in IIS 6, ip is public ip port is 6666, advanced - host value is www.hello.com firewall is open for 6666(web server port) and 53(DNS port), DMZ of router is my physical address in DNS, i have already had a zone called oldhello.com. And i expect a new domain name. So i have addded a new zone called hello.com and checked SOA server (P) is one.hello.local. then added a new host called one, full name is one.hello.com, ip address 192.168.7.3(my address in router) and then add a alias(CNAME) www, full name is www.hello.com, FQDN i choose the host i added before (one.hello.com) i expected that when i type the public ip in browser, can it be changed to domain name automatically. if not set host value www.hello.com, use public ip i can see the web however, after set up host value www.hello.com, browser show bad request invalid hostname

  Read the article

• need help in backing up 2 partitions to flash drive(Acronis)

  - by Nrew

  I'm trying it on virtual box and installed Acronis 2010. The backup was successful but when I checked on the backup which is on my flash drive. Here's my problem: Ive installed firefox before the backup, but the program files folder in the flash drive has no folder called firefox. How do I restore the the 2 partitions using the backup. What I did was to: Go to tools & utilities in Acronis then chose clone disk. Selected the source and destination(flash drive). Then I restart, the backup began. First with the first partition which has xp installed and the 2nd was vista lite. What do I do to restore it: I only got these folders on the root of the flash drive: Documents and settings Program files Windows BOOTSECT.BAK

  Read the article

• Google calendar sync has stopped working

  - by Andrew Heath

  I set up Google Calendar to sync with Lightning in Thunderbird. It has worked well for the last few weeks. It has now suddenly stopped working. I have checked the CalDAV addresses and they are all still ok. I do not know if my recent addition of syncing my new Android phone with the Google Calendar has anything to do with it, or just a coincidence. When Thunderbird tries to sync, it asks for the username and password. I enter these for the Google Calendar, and end up in a continuous circle.

  Read the article

• Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

  - by thecraic

  I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

  Read the article

• Weird files in User folder

  - by Vervious

  In my user folder (C:/Users/myAccount/) theres a set of interesting hidden files that I've never seen before (right now it's a fresh install of Windows 7 Ultimate). These are: NTUSER.DAT, ntuser.dat.LOG1, ntuser.dat.LOG2, and NTUSER.DAT(whole chain of numbers and letters).TM.bif, NTUSER.DAT(whole chain of numbers and letters).TMContaineretcetc.regtrans-ms, and another similar one. When I try to delete them, it says the system is using them. I've never seen these files before. Are they ok to delete? Or should I leave them in my home folder? I always keep "Show hidden files" as well as "Show System files" checked, since I prefer being able to see all the files on my computer. If I shouldn't delete them, is there at least a way to tidy them up a bit? Thanks.

  Read the article

• TCP/IP communication between Hyper-V host and guests

  - by Tedd Hansen

  This may be a simple one. :) I have a simple Hyper-V setup with a few guest os running. The host has 1 physical network adapter with a static IP assigned to it. The guests have network adapters assigned to "Internet" (Hyper-V network) which is bound to the physical host network adapter (Hyper-V "External" connection type). I am not able to communicate (ping or anything else) between guests and host. I've checked firewall and it seems fine (ports open from anywhere still don't work). I'm trying to communicate with the hosts IP assigned to the same physical interface that the guests are sharing. Guests can communicate between them just fine. I can't seem to find any relevant setting (I might just be missing it). So my questions: How do I fix it so host and guests can communicate?

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >