Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 157/609 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• Port forwarding problem

  - by Steve

  I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

  Read the article

• What is controlling the desktop display?

  - by Bart Silverstrim

  I have two Ubuntu systems and in the course of changing configurations something has become muddled. I have disabled Unity in favor of gnome shell, the older style display of the desktop. Then I installed xfce 4. Seemed everything would be working okay, and for the most part it does. Except I noticed that on one system there's something else controlling settings. On one, if I right click the desktop, I get the menu with the options: open in new window create launcher... create url link... create folder... create from template -> open terminal here paste desktop settings... properties... applications -> On system two, right clicking brings up the menu: Create new folder Create new document -> organize desktop by name keep aligned paste Change Desktop Background Additionally, even though I set the background with the xfce settings manager, on system two that background will appear for a few seconds before it's replaced by something that looks like a background from Ubuntu's original desktop. And it's being controlled by what comes up with the "change desktop background" when right clicking, which isn't the xfce settings manager. On the first system, that right click does bring up the xfce settings tool. In short, something is controlling/overriding the xfce settings on machine two, but I can't find what file or configuration tool is doing it. How can I get system two to behave as system one, giving control of settings and configuration of X to XFCE's tools?

  Read the article

• Squid 3 reloading makes it stop serving requests

  - by coredump

  So, we use Squid 3 here (3.0.STABLE8-3+lenny4), pretty standard configuration (no dansguardian or similar) + NTLM authentication with LDAP background, circa 1000 users on a busy day, and our acls reference some external files (allowed/blocked sites/ip addresses). On Squid 2.X we used to be capable of reloading it's configuration (to add or sites or addresses to rules, etc) and squid would not stop serving during the reload. Since we changed to 3.0, that seems to be impossible: everytime we use reload (or -k reconfigure) it stop serving requests for as long as 2 minutes, and clients receive a Configured proxy is not accepting connections message. I checked the documentation and got nothing about it, does anyone else suffer from this problem or is it a isolated case on my setup? Also, if you have Squid 3.0 and doesn't suffer from this problem, how is your squid configured?

  Read the article

• Automatic allocation(not Dynamic Allocation) on Windows DHCP server

  - by Kazoom

  DHCP supports three different mechanisms for IP address allocation: Manual allocation: the server's administrator creates a configuration for the server that includes the MAC address and IP address of each DHCP client that will be able to get an address: functionally equivalent to BOOTP though the protocol is incompatible. Automatic allocation: the server's administrator creates a configuration for the server that includes only IP addresses, which it gives out to clients. An IP address, once associated with a MAC address, is permanently associated with it until the server's administrator intervenes. Dynamic allocation: like automatic allocation except that the server will track leases and give IP addresses whose lease has expired to other DHCP clients How can i configure the automatic allocation on Windows 2000 or XP DHCP server? i can think of setting the lease to unlimited period, but i m not sure if the computer shutsdown gracefully it will make the ip address available to other machine.

  Read the article

• Cannot enable wireless on an Intel WifiLink 1000 on an Lenovo Ideapad z570

  - by Brij

  I am using the ubuntu 11.10 on lenovo ideapad z570. My wireless internet is not working. I have ensure that wireless switch is on. Windows 7, wireless works great.However ubuntu 11.10 is not allowing me to enable wireless connection. I have run the following command and here is the status. sudo lshw -class network *-network DISABLED description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 74:e5:0b:1c:a4:a4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:42 memory:d0500000-d0501fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 05 serial: f0:de:f1:64:b6:62 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8105e-1.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:2000(size=256) memory:d0404000-d0404fff memory:d0400000-d0403fff Here is rfkill list all output: rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no Note : Windows 7, wireless card property shows that Intel WifiLink 1000 BGN. Could someone help me to fix this issue.

  Read the article

• Nginx $scheme doesn't always work while using SSL for one specific page

  - by jjiceman

  I read and followed this question in order to configure nginx to force SSL for one page (admin.php for XenForo), and it is working well for a few of the site administrators but is not for myself. I was wondering if anyone has any advice on how to improve this configuration: ... ssl_certificate example.net.crt; ssl_certificate_key example.key; server { listen 80 default; listen 443 ssl; server_name www.example.net example.net; access_log /srv/www/example.net/logs/access.log; error_log /srv/www/example.net/logs/error.log; root /srv/www/example.net/public_html; index index.php index.html; location / { if ( $scheme = https ){ rewrite ^ http://example.net$request_uri? permanent; } try_files $uri $uri/ /index.php?$uri&$args; index index.php index.html; } location ^~ /admin.php { if ( $scheme = http ) { rewrite ^ https://example.net$request_uri? permanent; } try_files $uri /index.php; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS on; } location ~ \.php$ { try_files $uri /index.php; include fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; } } ... It seems that the extra information in the location ^~ /admin.php block is unecessary, does anyone know of an easy way to avoid duplicate code? Without it it skips the php block and just returns the php files. Currently it applies https correctly in Firefox when I navigate to admin.php. In Chrome, it downloads the admin.php page. When returning to the non-https website in Firefox, it does not correctly return to http but stays as SSL. Like I said earlier, this only happens for me, the other admins can go back and forth without a problem. Is this an issue on my end that I can fix? And does anyone know of any ways I could reduce duplicate configuration options in the configuration? Thanks in advance!

  Read the article

• IIS7 folder permissions

  - by Eanna

  I build a basic WCF service that I now want to host in IIS7 under Windows Server 2008 R2. I added the service as an application under the default web site but whenever i try to run the application I get the following error: HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. Config Error - Cannot read configuration file due to insufficient permissions The only way I can get this service working is if i choose to "connect as" the server Administrator when adding the service. the "application user (pass-through authentication)" option does not seem to work. Could anyone help me out, I've just started using IIS7 and have no idea what to do... Thanks

  Read the article

• IPSEC tunnel Fortinet Transparent Mode to inside Fortinet firewall in NAT Mode does not respond to i

  - by TrevJen

  I have 2 fortinet firewalls (fully patched); fw1 is providing an IPSEC tunnel in transparent mode. beneath this firewall is a fw2, a NAT firewall with a VIP address that has been confirmed to work. This configuration is required for my customers who want to connect to a public address space inside of the tunnel, in order to prevent cross over in IP space. This configuration works great for traffic going outbound to the remote side of the tunnel, but not inbound. While sniffing the traffic, I can see the inbound traffic going out of the fw1, but it is never seen at the fw2. Cust Net > 10.1.1.100 | | | FW1 >TRANSPARENT IPSEC | | | FW2 EXT >99.1.1.1.100-VIP | FW2 NAT >192.1.1.100-NAT

  Read the article

• Boot xen server through ipxe

  - by Ghassen Telmoudi

  I'm want install Xen Server 6.2 though ipxe, I tried different configurations, no luck making to work until now. I found some may example to boot from pxe using TFTP server, and here is an example: default xenserver-auto label xenserver-auto kernel mboot.c32 append xenserver/xen.gz dom0_max_vcpus=1-2 dom0_mem=752M,max:752M com1=115200,8n1 console=com1,vga --- xenserver/vmlinuz xencons=hvc console=hvc0 console=tty0 answerfile=http://[pxehost]/answerfile.xml remotelog=[SYSLOG] install --- xenserver/install.img The problem is that ipxe uses different syntax, I could not figure out how to convert this configuration to work on ipxe. Here is my ipxe file so far: #!ipxe echo "XEN Server is booting up" initrd http://server-ip/pxe/xen/boot/xen.gz kernel http://server-ip/pxe/xen/boot/pxelinux/mboot.c32 boot Can any one supply the correct configuration?

  Read the article

• Black screen on login, can get thru decrypt disk and access command line but no GUI

  - by t3lf3c

  Running 12.04 64 bit fresh alternative install, with disk crypto on a new Lenovo laptop Install didn't connect and install modules, even though I had the network cable plugged in and don't have any whacky proxy settings. I had to manually install ubunut-desktop and define sources after initial installation, so this seemed a bit weird (ISO matched MD5 sum though) I unplug the network cable, otherwise I get a black screen that I can do nothing with. So I turn laptop on, I have disk encryption, I type in the password at the Ubuntu decryption GUI then get "set up successfully" message "Waiting for network configuration ..." then "Waiting for up to 60 more seconds for network configuration" At this stage (a) If I wait for it then I get a black screen that I can do nothing with. (b) If I interrupt the process by pressing escape, then I break through to the command line. From the command line, I can go ahead and login, then plug my network cable in to do apt-get commands. As a precaution I do some house keeping which takes a few mins to run: sudo apt-get update sudo apt-get upgrade Running startx to get to the GUI gives: Fatal server errror: no screens found The .Xauthority file is being created in my home directory but it's empty. I review my order and note the system graphics: Intel HD Graphics (WWAN or mSATA capable) So it's weird that I can't get to the Gnome. It looks like drivers aren't working. Is there a way of getting Intel drivers from the command line? Or do you have any other suggestions on what to try next?

  Read the article

• Problem after mysql-server installation I cant install any thing in ubuntu 12.04.1 now

  - by mohammed ezzi

  I'm not an advanced user of Linux and I tried to install work with database so I installed Mysql-server, I think I did same thing wrong so I get in trouble and now I cant install any thing and this what I get when I use apt-get -f install : root@me:~# apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: mysql-server mysql-server-5.5 Suggested packages: tinyca mailx The following packages will be upgraded: mysql-server mysql-server-5.5 2 upgraded, 0 newly installed, 0 to remove and 194 not upgraded. 2 not fully installed or removed. Need to get 0 B/8,737 kB of archives. After this operation, 15.4 kB of additional disk space will be used. Do you want to continue [Y/n]? y dpkg: dependency problems prevent configuration of mysql-server-5.5: mysql-server-5.5 depends on mysql-server-core-5.5 (= 5.5.24-0ubuntu0.12.04.1); however: Version of mysql-server-core-5.5 on system is 5.5.28-0ubuntu0.12.04.3. dpkg: error processing mysql-server-5.5 (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing mysql-server (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) I tried to remove mysql-server but nothing happened.

  Read the article

• How do I get started with Chef?

  - by Brad Wright

  The chef documentation is pretty bad. And Google isn't helping me. Can anyone point me at a decent article or something that would help me get started? My specific issues are: How do I get a client to read my configuration? chef-solo seems like the best start (I don't want to run an OpenID server or Merb) How do I configure Apache to serve Django? I already know how to do this via regular server configuration, but I figure an example Chef recipe would be a good start;

  Read the article

• Windows expand over 2 monitors in quad-monitor setup

  - by Martin

  i just installed ubuntu 11.10 with my previous hardware setup: 4 monitors and 2 identical nvidia graphic cards. draging windows around all 4 monitors works nice, but when i maximize a window it expand always over 2 screens. (2x twinview). i had an workaround for this in 11.04 but cant remember what it was... may one of you guys have quad monitors up and running with window maximizing on only one screen my xorg.conf looks like this: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@allspice) Thu Aug 11 20:54:45 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" 0 1080 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• Problem using a public key when connecting to a SSH server running on Cygwin

  - by binary255

  We have installed Cygwin on a Windows Server 2008 Standard server and it working pretty well. Unfortunately we still have a big problem. We want to connect using a public key through SSH which doesn't work. It always falls back to using password login. We have appended our public key to ~/.ssh/authorized_keys on the server and we have our private and public key in ~/.ssh/id_dsa respective ~/.ssh/id_dsa.pub on the client. When debugging the SSH login session we see that the key is offered by the server apparently rejects it by some unknown reason. The SSH output when connecting from an Ubuntu 9.10 desktop with debug information enabled: $ ssh -v 192.168.10.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /home/myuseraccount/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for debug1: Connecting to 192.168.10.11 [192.168.10.11] port 22. debug1: Connection established. debug1: identity file /home/myuseraccount/.ssh/identity type -1 debug1: identity file /home/myuseraccount/.ssh/id_rsa type -1 debug1: identity file /home/myuseraccount/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.10.11' is known and matches the RSA host key. debug1: Found key in /home/myuseraccount/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/myuseraccount/.ssh/id_dsa debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /home/myuseraccount/.ssh/identity debug1: Trying private key: /home/myuseraccount/.ssh/id_rsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password [email protected]'s password: The version of Cygwin: $ uname -a CYGWIN_NT-6.0 servername 1.7.1(0.218/5/3) 2009-12-07 11:48 i686 Cygwin The installed packages: $ cygcheck -c Cygwin Package Information Package Version Status _update-info-dir 00871-1 OK alternatives 1.3.30c-10 OK arj 3.10.22-1 OK aspell 0.60.5-1 OK aspell-en 6.0.0-1 OK aspell-sv 0.50.2-2 OK autossh 1.4b-1 OK base-cygwin 2.1-1 OK base-files 3.9-3 OK base-passwd 3.1-1 OK bash 3.2.49-23 OK bash-completion 1.1-2 OK bc 1.06-2 OK bzip2 1.0.5-10 OK cabextract 1.1-1 OK compface 1.5.2-1 OK coreutils 7.0-2 OK cron 4.1-59 OK crypt 1.1-1 OK csih 0.9.1-1 OK curl 7.19.6-1 OK cvs 1.12.13-10 OK cvsutils 0.2.5-1 OK cygrunsrv 1.34-1 OK cygutils 1.4.2-1 OK cygwin 1.7.1-1 OK cygwin-doc 1.5-1 OK cygwin-x-doc 1.1.0-1 OK dash 0.5.5.1-2 OK diffutils 2.8.7-2 OK doxygen 1.6.1-2 OK e2fsprogs 1.35-3 OK editrights 1.01-2 OK emacs 23.1-10 OK emacs-X11 23.1-10 OK file 5.04-1 OK findutils 4.5.5-1 OK flip 1.19-1 OK font-adobe-dpi75 1.0.1-1 OK font-alias 1.0.2-1 OK font-encodings 1.0.3-1 OK font-misc-misc 1.1.0-1 OK fontconfig 2.8.0-1 OK gamin 0.1.10-10 OK gawk 3.1.7-1 OK gettext 0.17-11 OK gnome-icon-theme 2.28.0-1 OK grep 2.5.4-2 OK groff 1.19.2-2 OK gvim 7.2.264-1 OK gzip 1.3.12-2 OK hicolor-icon-theme 0.11-1 OK inetutils 1.5-6 OK ipc-utils 1.0-1 OK keychain 2.6.8-1 OK less 429-1 OK libaspell15 0.60.5-1 OK libatk1.0_0 1.28.0-1 OK libaudio2 1.9.2-1 OK libbz2_1 1.0.5-10 OK libcairo2 1.8.8-1 OK libcurl4 7.19.6-1 OK libdb4.2 4.2.52.5-2 OK libdb4.5 4.5.20.2-2 OK libexpat1 2.0.1-1 OK libfam0 0.1.10-10 OK libfontconfig1 2.8.0-1 OK libfontenc1 1.0.5-1 OK libfreetype6 2.3.12-1 OK libgcc1 4.3.4-3 OK libgdbm4 1.8.3-20 OK libgdk_pixbuf2.0_0 2.18.6-1 OK libgif4 4.1.6-10 OK libGL1 7.6.1-1 OK libglib2.0_0 2.22.4-2 OK libglitz1 0.5.6-10 OK libgmp3 4.3.1-3 OK libgtk2.0_0 2.18.6-1 OK libICE6 1.0.6-1 OK libiconv2 1.13.1-1 OK libidn11 1.16-1 OK libintl3 0.14.5-1 OK libintl8 0.17-11 OK libjasper1 1.900.1-1 OK libjbig2 2.0-11 OK libjpeg62 6b-21 OK libjpeg7 7-10 OK liblzma1 4.999.9beta-10 OK libncurses10 5.7-18 OK libncurses8 5.5-10 OK libncurses9 5.7-16 OK libopenldap2_3_0 2.3.43-1 OK libpango1.0_0 1.26.2-1 OK libpcre0 8.00-1 OK libpixman1_0 0.16.6-1 OK libpng12 1.2.35-10 OK libpopt0 1.6.4-4 OK libpq5 8.2.11-1 OK libreadline6 5.2.14-12 OK libreadline7 6.0.3-2 OK libsasl2 2.1.19-3 OK libSM6 1.1.1-1 OK libssh2_1 1.2.2-1 OK libssp0 4.3.4-3 OK libstdc++6 4.3.4-3 OK libtiff5 3.9.2-1 OK libwrap0 7.6-20 OK libX11_6 1.3.3-1 OK libXau6 1.0.5-1 OK libXaw3d7 1.5D-8 OK libXaw7 1.0.7-1 OK libxcb-render-util0 0.3.6-1 OK libxcb-render0 1.5-1 OK libxcb1 1.5-1 OK libXcomposite1 0.4.1-1 OK libXcursor1 1.1.10-1 OK libXdamage1 1.1.2-1 OK libXdmcp6 1.0.3-1 OK libXext6 1.1.1-1 OK libXfixes3 4.0.4-1 OK libXft2 2.1.14-1 OK libXi6 1.3-1 OK libXinerama1 1.1-1 OK libxkbfile1 1.0.6-1 OK libxml2 2.7.6-1 OK libXmu6 1.0.5-1 OK libXmuu1 1.0.5-1 OK libXpm4 3.5.8-1 OK libXrandr2 1.3.0-10 OK libXrender1 0.9.5-1 OK libXt6 1.0.7-1 OK links 1.00pre20-1 OK login 1.10-10 OK luit 1.0.5-1 OK lynx 2.8.5-4 OK man 1.6e-1 OK minires 1.02-1 OK mkfontdir 1.0.5-1 OK mkfontscale 1.0.7-1 OK openssh 5.4p1-1 OK openssl 0.9.8m-1 OK patch 2.5.8-9 OK patchutils 0.3.1-1 OK perl 5.10.1-3 OK rebase 3.0.1-1 OK run 1.1.12-11 OK screen 4.0.3-5 OK sed 4.1.5-2 OK shared-mime-info 0.70-1 OK tar 1.22.90-1 OK terminfo 5.7_20091114-13 OK terminfo0 5.5_20061104-11 OK texinfo 4.13-3 OK tidy 041206-1 OK time 1.7-2 OK tzcode 2009k-1 OK unzip 6.0-10 OK util-linux 2.14.1-1 OK vim 7.2.264-2 OK wget 1.11.4-4 OK which 2.20-2 OK wput 0.6.1-2 OK xauth 1.0.4-1 OK xclipboard 1.1.0-1 OK xcursor-themes 1.0.2-1 OK xemacs 21.4.22-1 OK xemacs-emacs-common 21.4.22-1 OK xemacs-sumo 2007-04-27-1 OK xemacs-tags 21.4.22-1 OK xeyes 1.1.0-1 OK xinit 1.2.1-1 OK xinput 1.5.0-1 OK xkbcomp 1.1.1-1 OK xkeyboard-config 1.8-1 OK xkill 1.0.2-1 OK xmodmap 1.0.4-1 OK xorg-docs 1.5-1 OK xorg-server 1.7.6-2 OK xrdb 1.0.6-1 OK xset 1.1.0-1 OK xterm 255-1 OK xz 4.999.9beta-10 OK zip 3.0-11 OK zlib 1.2.3-10 OK zlib-devel 1.2.3-10 OK zlib0 1.2.3-10 OK The ssh deamon configuration file: $ cat /etc/sshd_config # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh_host_rsa_key #HostKey /etc/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes StrictModes no #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no AllowAgentForwarding yes AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no #PrintMotd yes #PrintLastLog yes TCPKeepAlive yes #UseLogin no UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /usr/sbin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs #X11Forwarding yes #AllowTcpForwarding yes #ForceCommand cvs server I hope this information is enough to solve the problem. In case any more is needed please comment and I'll add it. Thank you for reading!

  Read the article

• What are some of the best wireless routers for a price-conscious home power-user?

  - by Alain

  I'm extremely dissatisfied with the 'popular' choice for routers in homes and small offices. They are expensive (upwards of 60$), lack a great deal of useful configuration options, and seem to need to be restarted quite often. (Linksys comes to mind). I've been on the market for a good router lately, and slowly collecting a set of requirements I feel good routers should meet. Maximum number of TCP/IP connections. - This isn't something I see any routers advertise, but in terms of supporting torrent applications, I've been screwed by routers that support less than 20 here. From what I understand a fairly standard number is 200, but there are not so expensive routers that support thousands. Router configuration menu - Most have standard menu's that let you set up basic things like your wireless network encryption settings, uPnP, and maybe even DMZ (demilitarized zones). An absolute requirement for me, however, are routers with good enough firmware to support: Explicit Port forwarding Assigning static local ips to specific mac addresses, or at least Port forwarding by MAC address Port, IP and MAC filtering Dynamic DNS service for home users who want to set up a server but have a dynamic IP Traffic shaping (ideally) - giving priority to packets from certain machines or over certain ports. Strong wireless signal - If getting a reliable signal requires me to be so close to the router that I can connect an Ethernet cable, it's not good enough. As many Ethernet ports as possible. - Because I want to be able to switch from console gaming to PC gaming without visiting my router. So far, the best thing I've stumbled upon (in the bargain bin at staples) was a 20$ retail plus router. It was meant to be the cheapest alternative until I could find something better to purchase online, but I was actually blown away by the firmware capabilities. It supports defining reserved bandwidth for certain network traffic, dynamic DNS, reserving local IPs for specific MAC addresses, etc. At 2 am when my roommate is killing our Internet with their torrents, I can limit their bandwidth without outright blacklisting them. I have, however, met serious limitations when it comes to network traffic between local machines. It claims a 300Mbps connection, but I have trouble streaming videos from my PC to my console or other laptops wirelessly. It has a meltdown and needs to be reset once in a while (no more than a couple times a month), and it's got a 200 connection limit. There 4 Ethernet ports in the back but I'm pretty sure the first doesn't work. So some great answers to this question would be: Any metrics you use to compare routers, and requirements you have for new candidates. The best routers you've found for supporting home servers, file management systems, high volume torrent traffic, good price/feature ratio, etc. Good configuration advice (aside from 'use Ethernet whenever possible') Thanks for your feedback and experiences!

  Read the article

• How to make HOME or END keys work in mc running on OS X (ssh)

  - by Sorin Sbarnea

  I installed MacPorts on OS X 10.5 and I found out that when I connect to the computer using SSH and use mc - Midnight Commander - the HOME and END keys do not work. I have to mention that I'm using putty and I am able to use the keyboard very well on Linux machines like Fedora, Ubuntu,... Here is putty keyboard configuration (a configuration I found to be optimal over time): Backspace key: 127 Home/End keys: Standard Function keys: Xterm R6 Cursor keys: Normal Numpad: normal Terminal type string: xterm-color I'm looking for a command line solution/script that does these changes, this make much easier to create a prepare OS script for configuring a new OS.

  Read the article

• dansguardian error: filterports must match number of filterips (pfsense)

  - by Bulki

  Hi I'm setting up pfsense with squid3 and dansguardian packages. When I try to start the dansguardian service however, I get the following errors: May 27 22:17:37 php: /pkg_edit.php: The command '/usr/local/etc/rc.d/dansguardian.sh start' returned exit code '1', the output was 'kern.ipc.somaxconn: 16384 -> 16384 kern.maxfiles: 131072 -> 131072 kern.maxfilesperproc: 104856 -> 104856 kern.threads.max_threads_per_proc: 4096 -> 4096 Starting dansguardian. filterports (2) must match number of filterips (1) Error parsing the dansguardian.conf file or other DansGuardian configuration files /usr/local/etc/rc.d/dansguardian.sh: WARNING: failed to start dansguardian' May 27 22:17:37 root: /usr/local/etc/rc.d/dansguardian.sh: WARNING: failed to start dansguardian May 27 22:17:37 dansguardian[52944]: Error parsing the dansguardian.conf file or other DansGuardian configuration files May 27 22:17:37 dansguardian[52944]: filterports must match number of filterips What does "filterports must match number of filterips" mean? Any thoughts on the matter?

  Read the article

• How to start a task before networking?

  - by user1252434

  I've written an upstart task that modifies /etc/network/interfaces. (Actually a file sourced into it.) Which start on condition do I need to declare to let my task run before any networking jobs? I've tried start on starting networking, but that's apparently too late. When I log in after booting I can see that the changes were written, but obviously they are not used: the new config states a static IP, but the boot process waits for a non-existing DHCP server (old config) to time out. I've also tried start on starting network-interface INTERFACE=eth0, which didn't work either. IIRC there was an error in the log that the change couldn't be written. Background: I need a VM template that can be cloned and the clones configured through a script. Among other settings, I need to give them a static IP address to access them from the host. I use guestfish to write a config file to one of the virtual disks and let a script apply these settings to the system. I don't want that disk to contain an actual system settings file. I can't modify /etc directly, because that disk is shared (copy-on-write/diff) among the clones and guestfish apparently doesn't support that type of image. I could also let them use DHCP and setup a server that assigns IP by MAC, but I'm afraid of the complexity. I could also add just another virtual disk for configuration files, but if possible I'd prefer to store settings directly on the system disk image. Used software: Ubuntu Server 12.04, VirtualBox. The configuration modifier is a self written ruby script.

  Read the article

• Hosting 2 different SSL domains on the same IP [closed]

  - by Jim

  Possible Duplicate: Multiple SSL domains on the same IP address and same port? I have 2 different domains, domain1.com and domain2.net. Both require SSL certificates. I've got the certificates signed by a CA and now need to set them up on Apache. I've got a single IP address and have found a post here: SSL site not using the correct IP in Apache and Ubuntu that apparently works for ubuntu but I am on CentOS and have not had the same luck trying that configuration. When I try that configuration, Apache dies telling me that the port is already in use: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:443 I had SSL working for a single domain but now that I've added the second, I get a browser warning about the cert not belonging to the domain. How do I get both domains to work using virtual host containers?

  Read the article

• How to disable "Automatically search for drivers and install" in Windows 7

  - by raegadfsgfsdg

  I connected my TI-89 to my Windows 7 system, and apparently it is not plug-and-play. There was a link to a Windows configuration setting made available that gave the option to automatically search their windows site for drivers and automatically install them each time i connect an unrecognized device. Well, I selected that link with the intention of it being temporary and just that one time. That didnt work and the location/install of a driver was not successful. How can I reset that setting to not automatically install whatever drivers it thinks might be fitting? I cannot find that configuration setting when I looked for it recently.

  Read the article

• Get Started using Build-Deploy-Test Workflow with TFS 2012

  - by Jakob Ehn

  TFS 2012 introduces a new type of Lab environment called Standard Environment. This allows you to setup a full Build Deploy Test (BDT) workflow that will build your application, deploy it to your target machine(s) and then run a set of tests on that server to verify the deployment. In TFS 2010, you had to use System Center Virtual Machine Manager and involve half of your IT department to get going. Now all you need is a server (virtual or physical) where you want to deploy and test your application. You don’t even have to install a test agent on the machine, TFS 2012 will do this for you! Although each step is rather simple, the entire process of setting it up consists of a bunch of steps. So I thought that it could be useful to run through a typical setup.I will also link to some good guidance from MSDN on each topic. High Level Steps Install and configure Visual Studio 2012 Test Controller on Target Server Create Standard Environment Create Test Plan with Test Case Run Test Case Create Coded UI Test from Test Case Associate Coded UI Test with Test Case Create Build Definition using LabDefaultTemplate 1. Install and Configure Visual Studio 2012 Test Controller on Target Server First of all, note that you do not have to have the Test Controller running on the target server. It can be running on another server, as long as the Test Agent can communicate with the test controller and the test controller can communicate with the TFS server. If you have several machines in your environment (web server, database server etc..), the test controller can be installed either on one of those machines or on a dedicated machine. To install the test controller, simply mount the Visual Studio Agents media on the server and browse to the vstf_controller.exe file located in the TestController folder. Run through the installation, you might need to reboot the server since it installs .NET 4.5. When the test controller is installed, the Test Controller configuration tool will launch automatically (if it doesn’t, you can start it from the Start menu). Here you will supply the credentials of the account running the test controller service. Note that this account will be given the necessary permissions in TFS during the configuration. Make sure that you have entered a valid account by pressing the Test link. Also, you have to register the test controller with the TFS collection where your test plan is located (and usually the code base of course) When you press Apply Settings, all the configuration will be done. You might get some warnings at the end, that might or might not cause a problem later. Be sure to read them carefully.   For more information about configuring your test controllers, see Setting Up Test Controllers and Test Agents to Manage Tests with Visual Studio 2. Create Standard Environment Now you need to create a Lab environment in Microsoft Test Manager. Since we are using an existing physical or virtual machine we will create a Standard Environment. Open MTM and go to Lab Center. Click New to create a new environment Enter a name for the environment. Since this environment will only contain one machine, we will use the machine name for the environment (TargetServer in this case) On the next page, click Add to add a machine to the environment. Enter the name of the machine (TargetServer.Domain.Com), and give it the Web Server role. The name must be reachable both from your machine during configuration and from the TFS app tier server. You also need to supply an account that is a local administration on the target server. This is needed in order to automatically install a test agent later on the machine. On the next page, you can add tags to the machine. This is not needed in this scenario so go to the next page. Here you will specify which test controller to use and that you want to run UI tests on this environment. This will in result in a Test Agent being automatically installed and configured on the target server. The name of the machine where you installed the test controller should be available on the drop down list (TargetServer in this sample). If you can’t see it, you might have selected a different TFS project collection. Press Next twice and then Verify to verify all the settings: Press finish. This will now create and prepare the environment, which means that it will remote install a test agent on the machine. As part of this installation, the remote server will be restarted. 3-5. Create Test Plan, Run Test Case, Create Coded UI Test I will not cover step 3-5 here, there are plenty of information on how you create test plans and test cases and automate them using Coded UI Tests. In this example I have a test plan called My Application and it contains among other things a test suite called Automated Tests where I plan to put test cases that should be automated and executed as part of the BDT workflow. For more information about Coded UI Tests, see Verifying Code by Using Coded User Interface Tests   6. Associate Coded UI Test with Test Case OK, so now we want to automate our Coded UI Test and have it run as part of the BDT workflow. You might think that you coded UI test already is automated, but the meaning of the term here is that you link your coded UI Test to an existing Test Case, thereby making the Test Case automated. And the test case should be part of the test suite that we will run during the BDT. Open the solution that contains the coded UI test method. Open the Test Case work item that you want to automate. Go to the Associated Automation tab and click on the “…” button. Select the coded UI test that you corresponds to the test case: Press OK and the save the test case For more information about associating an automated test case with a test case, see How to: Associate an Automated Test with a Test Case 7. Create Build Definition using LabDefaultTemplate Now we are ready to create a build definition that will implement the full BDT workflow. For this purpose we will use the LabDefaultTemplate.11.xaml that comes out of the box in TFS 2012. This build process template lets you take the output of another build and deploy it to each target machine. Since the deployment process will be running on the target server, you will have less problem with permissions and firewalls than if you were to remote deploy your solution. So, before creating a BDT workflow build definition, make sure that you have an existing build definition that produces a release build of your application. Go to the Builds hub in Team Explorer and select New Build Definition Give the build definition a meaningful name, here I called it MyApplication.Deploy Set the trigger to Manual Define a workspace for the build definition. Note that a BDT build doesn’t really need a workspace, since all it does is to launch another build definition and deploy the output of that build. But TFS doesn’t allow you to save a build definition without adding at least one mapping. On Build Defaults, select the build controller. Since this build actually won’t produce any output, you can select the “This build does not copy output files to a drop folder” option. On the process tab, select the LabDefaultTemplate.11.xaml. This is usually located at $/TeamProject/BuildProcessTemplates/LabDefaultTemplate.11.xaml. To configure it, press the … button on the Lab Process Settings property First, select the environment that you created before: Select which build that you want to deploy and test. The “Select an existing build” option is very useful when developing the BDT workflow, because you do not have to run through the target build every time, instead it will basically just run through the deployment and test steps which speeds up the process. Here I have selected to queue a new build of the MyApplication.Test build definition On the deploy tab, you need to specify how the application should be installed on the target server. You can supply a list of deployment scripts with arguments that will be executed on the target server. In this example I execute the generated web deploy command file to deploy the solution. If you for example have databases you can use sqlpackage.exe to deploy the database. If you are producing MSI installers in your build, you can run them using msiexec.exe and so on. A good practice is to create a batch file that contain the entire deployment that you can run both locally and on the target server. Then you would just execute the deployment batch file here in one single step. The workflow defines some variables that are useful when running the deployments. These variables are: $(BuildLocation) The full path to where your build files are located $(InternalComputerName_<VM Name>) The computer name for a virtual machine in a SCVMM environment $(ComputerName_<VM Name>) The fully qualified domain name of the virtual machine As you can see, I specify the path to the myapplication.deploy.cmd file using the $(BuildLocation) variable, which is the drop folder of the MyApplication.Test build. Note: The test agent account must have read permission in this drop location. You can find more information here on Building your Deployment Scripts On the last tab, we specify which tests to run after deployment. Here I select the test plan and the Automated Tests test suite that we saw before: Note that I also selected the automated test settings (called TargetServer in this case) that I have defined for my test plan. In here I define what data that should be collected as part of the test run. For more information about test settings, see Specifying Test Settings for Microsoft Test Manager Tests We are done! Queue your BDT build and wait for it to finish. If the build succeeds, your build summary should look something like this:

  Read the article

• Problem using a public key when connecting to a SSH server running on Cygwin

  - by Deleted

  We have installed Cygwin on a Windows Server 2008 Standard server and it working pretty well. Unfortunately we still have a big problem. We want to connect using a public key through SSH which doesn't work. It always falls back to using password login. We have appended our public key to ~/.ssh/authorized_keys on the server and we have our private and public key in ~/.ssh/id_dsa respective ~/.ssh/id_dsa.pub on the client. When debugging the SSH login session we see that the key is offered by the server apparently rejects it by some unknown reason. The SSH output when connecting from an Ubuntu 9.10 desktop with debug information enabled: $ ssh -v 192.168.10.11 OpenSSH_5.1p1 Debian-6ubuntu2, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /home/myuseraccount/.ssh/config debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for debug1: Connecting to 192.168.10.11 [192.168.10.11] port 22. debug1: Connection established. debug1: identity file /home/myuseraccount/.ssh/identity type -1 debug1: identity file /home/myuseraccount/.ssh/id_rsa type -1 debug1: identity file /home/myuseraccount/.ssh/id_dsa type 2 debug1: Checking blacklist file /usr/share/ssh/blacklist.DSA-1024 debug1: Checking blacklist file /etc/ssh/blacklist.DSA-1024 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '192.168.10.11' is known and matches the RSA host key. debug1: Found key in /home/myuseraccount/.ssh/known_hosts:12 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: /home/myuseraccount/.ssh/id_dsa debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: /home/myuseraccount/.ssh/identity debug1: Trying private key: /home/myuseraccount/.ssh/id_rsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password [email protected]'s password: The version of Cygwin: $ uname -a CYGWIN_NT-6.0 servername 1.7.1(0.218/5/3) 2009-12-07 11:48 i686 Cygwin The installed packages: $ cygcheck -c Cygwin Package Information Package Version Status _update-info-dir 00871-1 OK alternatives 1.3.30c-10 OK arj 3.10.22-1 OK aspell 0.60.5-1 OK aspell-en 6.0.0-1 OK aspell-sv 0.50.2-2 OK autossh 1.4b-1 OK base-cygwin 2.1-1 OK base-files 3.9-3 OK base-passwd 3.1-1 OK bash 3.2.49-23 OK bash-completion 1.1-2 OK bc 1.06-2 OK bzip2 1.0.5-10 OK cabextract 1.1-1 OK compface 1.5.2-1 OK coreutils 7.0-2 OK cron 4.1-59 OK crypt 1.1-1 OK csih 0.9.1-1 OK curl 7.19.6-1 OK cvs 1.12.13-10 OK cvsutils 0.2.5-1 OK cygrunsrv 1.34-1 OK cygutils 1.4.2-1 OK cygwin 1.7.1-1 OK cygwin-doc 1.5-1 OK cygwin-x-doc 1.1.0-1 OK dash 0.5.5.1-2 OK diffutils 2.8.7-2 OK doxygen 1.6.1-2 OK e2fsprogs 1.35-3 OK editrights 1.01-2 OK emacs 23.1-10 OK emacs-X11 23.1-10 OK file 5.04-1 OK findutils 4.5.5-1 OK flip 1.19-1 OK font-adobe-dpi75 1.0.1-1 OK font-alias 1.0.2-1 OK font-encodings 1.0.3-1 OK font-misc-misc 1.1.0-1 OK fontconfig 2.8.0-1 OK gamin 0.1.10-10 OK gawk 3.1.7-1 OK gettext 0.17-11 OK gnome-icon-theme 2.28.0-1 OK grep 2.5.4-2 OK groff 1.19.2-2 OK gvim 7.2.264-1 OK gzip 1.3.12-2 OK hicolor-icon-theme 0.11-1 OK inetutils 1.5-6 OK ipc-utils 1.0-1 OK keychain 2.6.8-1 OK less 429-1 OK libaspell15 0.60.5-1 OK libatk1.0_0 1.28.0-1 OK libaudio2 1.9.2-1 OK libbz2_1 1.0.5-10 OK libcairo2 1.8.8-1 OK libcurl4 7.19.6-1 OK libdb4.2 4.2.52.5-2 OK libdb4.5 4.5.20.2-2 OK libexpat1 2.0.1-1 OK libfam0 0.1.10-10 OK libfontconfig1 2.8.0-1 OK libfontenc1 1.0.5-1 OK libfreetype6 2.3.12-1 OK libgcc1 4.3.4-3 OK libgdbm4 1.8.3-20 OK libgdk_pixbuf2.0_0 2.18.6-1 OK libgif4 4.1.6-10 OK libGL1 7.6.1-1 OK libglib2.0_0 2.22.4-2 OK libglitz1 0.5.6-10 OK libgmp3 4.3.1-3 OK libgtk2.0_0 2.18.6-1 OK libICE6 1.0.6-1 OK libiconv2 1.13.1-1 OK libidn11 1.16-1 OK libintl3 0.14.5-1 OK libintl8 0.17-11 OK libjasper1 1.900.1-1 OK libjbig2 2.0-11 OK libjpeg62 6b-21 OK libjpeg7 7-10 OK liblzma1 4.999.9beta-10 OK libncurses10 5.7-18 OK libncurses8 5.5-10 OK libncurses9 5.7-16 OK libopenldap2_3_0 2.3.43-1 OK libpango1.0_0 1.26.2-1 OK libpcre0 8.00-1 OK libpixman1_0 0.16.6-1 OK libpng12 1.2.35-10 OK libpopt0 1.6.4-4 OK libpq5 8.2.11-1 OK libreadline6 5.2.14-12 OK libreadline7 6.0.3-2 OK libsasl2 2.1.19-3 OK libSM6 1.1.1-1 OK libssh2_1 1.2.2-1 OK libssp0 4.3.4-3 OK libstdc++6 4.3.4-3 OK libtiff5 3.9.2-1 OK libwrap0 7.6-20 OK libX11_6 1.3.3-1 OK libXau6 1.0.5-1 OK libXaw3d7 1.5D-8 OK libXaw7 1.0.7-1 OK libxcb-render-util0 0.3.6-1 OK libxcb-render0 1.5-1 OK libxcb1 1.5-1 OK libXcomposite1 0.4.1-1 OK libXcursor1 1.1.10-1 OK libXdamage1 1.1.2-1 OK libXdmcp6 1.0.3-1 OK libXext6 1.1.1-1 OK libXfixes3 4.0.4-1 OK libXft2 2.1.14-1 OK libXi6 1.3-1 OK libXinerama1 1.1-1 OK libxkbfile1 1.0.6-1 OK libxml2 2.7.6-1 OK libXmu6 1.0.5-1 OK libXmuu1 1.0.5-1 OK libXpm4 3.5.8-1 OK libXrandr2 1.3.0-10 OK libXrender1 0.9.5-1 OK libXt6 1.0.7-1 OK links 1.00pre20-1 OK login 1.10-10 OK luit 1.0.5-1 OK lynx 2.8.5-4 OK man 1.6e-1 OK minires 1.02-1 OK mkfontdir 1.0.5-1 OK mkfontscale 1.0.7-1 OK openssh 5.4p1-1 OK openssl 0.9.8m-1 OK patch 2.5.8-9 OK patchutils 0.3.1-1 OK perl 5.10.1-3 OK rebase 3.0.1-1 OK run 1.1.12-11 OK screen 4.0.3-5 OK sed 4.1.5-2 OK shared-mime-info 0.70-1 OK tar 1.22.90-1 OK terminfo 5.7_20091114-13 OK terminfo0 5.5_20061104-11 OK texinfo 4.13-3 OK tidy 041206-1 OK time 1.7-2 OK tzcode 2009k-1 OK unzip 6.0-10 OK util-linux 2.14.1-1 OK vim 7.2.264-2 OK wget 1.11.4-4 OK which 2.20-2 OK wput 0.6.1-2 OK xauth 1.0.4-1 OK xclipboard 1.1.0-1 OK xcursor-themes 1.0.2-1 OK xemacs 21.4.22-1 OK xemacs-emacs-common 21.4.22-1 OK xemacs-sumo 2007-04-27-1 OK xemacs-tags 21.4.22-1 OK xeyes 1.1.0-1 OK xinit 1.2.1-1 OK xinput 1.5.0-1 OK xkbcomp 1.1.1-1 OK xkeyboard-config 1.8-1 OK xkill 1.0.2-1 OK xmodmap 1.0.4-1 OK xorg-docs 1.5-1 OK xorg-server 1.7.6-2 OK xrdb 1.0.6-1 OK xset 1.1.0-1 OK xterm 255-1 OK xz 4.999.9beta-10 OK zip 3.0-11 OK zlib 1.2.3-10 OK zlib-devel 1.2.3-10 OK zlib0 1.2.3-10 OK The ssh deamon configuration file: $ cat /etc/sshd_config # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/bin:/usr/sbin:/sbin:/usr/bin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh_host_rsa_key #HostKey /etc/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m #PermitRootLogin yes StrictModes no #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh_known_hosts #RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! #PasswordAuthentication yes #PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no AllowAgentForwarding yes AllowTcpForwarding yes GatewayPorts yes X11Forwarding yes X11DisplayOffset 10 X11UseLocalhost no #PrintMotd yes #PrintLastLog yes TCPKeepAlive yes #UseLogin no UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /usr/sbin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs #X11Forwarding yes #AllowTcpForwarding yes #ForceCommand cvs server I hope this information is enough to solve the problem. In case any more is needed please comment and I'll add it. Thank you for reading!

  Read the article

• Toshiba eStudio 281c turn off snmp in driver.

  - by Matt

  I have a customer with an eStudio 281c colour copier/printer and I'm having an issue with terminal services. Basically, the driver has the ability to query the printer for its configuration over snmp. I've set it to manual rather than auto so it's effectively switched off. Trouble is, when logging into terminal services it's still trying to communicate with the printer. This is an issue because when it fails it then defaults to being a different printer model with a different tray configuration. Users can still print but the settings are wrong. Any ideas?

  Read the article

• How do I stop XNA/Visual Studio from rebuilding my content project every time I build?

  - by Phil Quinn

  My group and I are working on a game in XNA 4.0 with Visual Studio 2010/2012. The main solution has 6 projects: 2 XNA game projects (1 executable/ 1 class library), 1 WPF executable for the level editor, 2 standard class libraries, and a content project. Originally, the editor and engine XNA game projects had a content reference to separate content projects. Recently, I consolidated the content projects into one to simplify asset additions. Since pushing these changes to our git repo, certain members of my group have been experiencing weird build issues. Every time they run the project, they have to re-build all of the assets. This happens regardless of whether any changes were made, even if they just run the project directly after building. I've taken a few steps to figure out why this is happening. Below is the MSBuild output set on Normal verbosity. The seemingly important part is at 4, with the line 4> Rebuilding all content because build settings have changed 1>------ Build started: Project: Engine.Core, Configuration: Debug x86 ------ 1>Build started 11/29/2012 3:24:24 AM. 1>ResolveAssemblyReferences: 1> A TargetFramework profile exclusion list will be generated. 1>EmbedXnaFrameworkRuntimeProfile: 1>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 1>GenerateTargetFrameworkMonikerAttribute: 1>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 1>CoreCompile: 1>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 1>XnaWriteCacheFile: 1>Skipping target "XnaWriteCacheFile" because all output files are up-to-date with respect to the input files. 1>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 1> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 1>_CopyAppConfigFile: 1>Skipping target "_CopyAppConfigFile" because all output files are up-to-date with respect to the input files. 1>CopyFilesToOutputDirectory: 1> Engine.Core -> <solution-dir>\src\Engine.Core\bin\x86\Debug\TimeSink.Engine.Core.dll 1> 1>Build succeeded. 1> 1>Time Elapsed 00:00:00.13 2>------ Build started: Project: TimeSink.Entities, Configuration: Debug x86 ------ 2>Build started 11/29/2012 3:24:25 AM. 2>ResolveAssemblyReferences: 2> A TargetFramework profile exclusion list will be generated. 2>EmbedXnaFrameworkRuntimeProfile: 2>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 2>GenerateTargetFrameworkMonikerAttribute: 2>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 2>CoreCompile: 2>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 2>XnaWriteCacheFile: 2>Skipping target "XnaWriteCacheFile" because all output files are up-to-date with respect to the input files. 2>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 2> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 2>CopyFilesToOutputDirectory: 2> TimeSink.Entities -> <solution-dir>\src\TimeSink.Entities\bin\x86\Debug\TimeSink.Entities.dll 2> 2>Build succeeded. 2> 2>Time Elapsed 00:00:00.11 3>------ Build started: Project: Editor (Editor\Editor), Configuration: Debug x86 ------ 4>------ Build started: Project: Engine.Game, Configuration: Debug x86 ------ 3>Build started 11/29/2012 3:24:25 AM. 3>CoreCompile: 3> All content is already up to date 3>ResolveAssemblyReferences: 3> A TargetFramework profile exclusion list will be generated. 3>EmbedXnaFrameworkRuntimeProfile: 3>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 3>GenerateTargetFrameworkMonikerAttribute: 3>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 3>CoreCompile: 3>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 3>XnaWriteCacheFile: 3>Skipping target "XnaWriteCacheFile" because all output files are up-to-date with respect to the input files. 3>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 3> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 3>_CopyOutOfDateNestedContentItemsToOutputDirectory: 3>Skipping target "_CopyOutOfDateNestedContentItemsToOutputDirectory" because all output files are up-to-date with respect to the input files. 3>CopyFilesToOutputDirectory: 3> Editor -> <solution-dir>\src\Editor\Editor\bin\x86\Debug\Editor.dll 3> 3>Build succeeded. 3> 3>Time Elapsed 00:00:00.39 4>Build started 11/29/2012 3:24:25 AM. 4>CoreCompile: 4> Rebuilding all content because build settings have changed 4> Building Textures\circle.png -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\circle.xnb 4> Importing Textures\circle.png with Microsoft.Xna.Framework.Content.Pipeline.TextureImporter 4> Processing Textures\circle.png with Microsoft.Xna.Framework.Content.Pipeline.Processors.TextureProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\circle.xnb 4> Building Textures\giroux.png -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\giroux.xnb 4> Importing Textures\giroux.png with Microsoft.Xna.Framework.Content.Pipeline.TextureImporter 4> Processing Textures\giroux.png with Microsoft.Xna.Framework.Content.Pipeline.Processors.TextureProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\giroux.xnb 4> Building Textures\Body_Neutral.png -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\Body_Neutral.xnb 4> Importing Textures\Body_Neutral.png with Microsoft.Xna.Framework.Content.Pipeline.TextureImporter 4> Processing Textures\Body_Neutral.png with Microsoft.Xna.Framework.Content.Pipeline.Processors.TextureProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\Textures\Body_Neutral.xnb 4> Building font.spritefont -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\font.xnb 4> Importing font.spritefont with Microsoft.Xna.Framework.Content.Pipeline.FontDescriptionImporter 4> Processing font.spritefont with Microsoft.Xna.Framework.Content.Pipeline.Processors.FontDescriptionProcessor 4> Compiling <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Content\font.xnb 4>ResolveAssemblyReferences: 4> A TargetFramework profile exclusion list will be generated. 4>EmbedXnaFrameworkRuntimeProfile: 4>Skipping target "EmbedXnaFrameworkRuntimeProfile" because all output files are up-to-date with respect to the input files. 4>GenerateTargetFrameworkMonikerAttribute: 4>Skipping target "GenerateTargetFrameworkMonikerAttribute" because all output files are up-to-date with respect to the input files. 4>CoreCompile: 4>Skipping target "CoreCompile" because all output files are up-to-date with respect to the input files. 4>_CopyOutOfDateSourceItemsToOutputDirectoryAlways: 4> Copying file from "<solution-dir>\src\Engine.Core\DialoguePrototypeTestDB.s3db" to "bin\x86\Debug\DialoguePrototypeTestDB.s3db". 4>_CopyOutOfDateNestedContentItemsToOutputDirectory: 4>Skipping target "_CopyOutOfDateNestedContentItemsToOutputDirectory" because all output files are up-to-date with respect to the input files. 4>_CopyAppConfigFile: 4>Skipping target "_CopyAppConfigFile" because all output files are up-to-date with respect to the input files. 4>CopyFilesToOutputDirectory: 4> Engine.Game -> <solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Engine.Game.exe 4>IncrementalClean: 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\circle.xnb". 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\giroux.xnb". 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\Body_Neutral.xnb". 4> Deleting file "<solution-dir>\src\Engine.Game\Engine.Game\bin\x86\Debug\font.xnb". 4> 4>Build succeeded. 4> 4>Time Elapsed 00:00:01.72 ========== Build: 4 succeeded, 0 failed, 1 up-to-date, 0 skipped ========== I can't think of how build settings could change between consecutive executions. Like I said, this only happens for half our group. One member is on a 32-bit Windows 7 Prof bootcamp partition on a Mac. Everyone else, including those who don't have the issue, are running straight 64-bit Windows 7 Prof. Both have tried using VS 2010 and VS 2012. Any insight would be greatly appreciated. Also, I can post more details upon request if this isn't thorough enough.

  Read the article

• Cannot uninstall myspell-he

  - by Yuval Rabinovich

  I tried to install a Hebrew spell checker for LibreOffice. I downloaded a package named myspell-he_1.1-1_all.deb and tried to install it through the software center, installation failed and I can neither complete installation nor remove it. Since then, whenever I run Update Manager I get an error message: The package system is broken, In details: The following packages have unmet dependencies: dictionaries-common: When I try to run the Software center I get a pop-up window: Items cannot be installed or removed until the package catalog is repaired. A Repair option is suggested. If I click it the following nessage appears: installArchives() failed: dpkg: dependency problems prevent configuration of myspell-he: dictionaries-common (1.12.1ubuntu2) breaks myspell-he (<= 1.1-1) and is installed. Version of myspell-he to be configured is 1.1-1. dpkg: error processing myspell-he (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: myspell-he Error in function: dpkg: dependency problems prevent configuration of myspell-he: dictionaries-common (1.12.1ubuntu2) breaks myspell-he (<= 1.1-1) and is installed. Version of myspell-he to be configured is 1.1-1. dpkg: error processing myspell-he (--configure): dependency problems - leaving unconfigured How can I clear this mess?

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >