Search Results

Search found 15209 results on 609 pages for 'configuration'.

Page 154/609 | < Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >

• Vim: Use different ~/.vim/plugin/ directories for different versions of vim?

  - by Stefan Lasiewski

  Like many of you, my custom Vim configuration is stored in my ~/.vimrc, with the plugins, colors, etc. stored under ~/.vim/plugins, ~/.vim/colors, etc. I want to share a single Vim configuration among many servers. Some of these servers run Vim 7, some run the older Vim 6. Most Vim plugins are intended for Vim 7, but older versions still exist for those of us on older systems. See DirDiff for an example. If I am on a system which runs Vim 6, how can I configure Vim to only use Vim 6-compatible plugins? I was thinking about storing older plugins in a subdirectory like ~/.vim/plugins6/ and keep the Vim plugins in ~/.vim/plugins, but then how can I tell Vim6 to ignore ~/.vim/plugins and use ~/.vim/plugins6 instead?

  Read the article

• Oops, no RSA or DSA server certificate found for 'server.host.name:0'?

  - by Scott Warren

  I'm setting up a new web server that hosts a dozen virtual hosts on Ubuntu 12.4 using Apache 2.2.22 with one config file per site. I created all the configuration files all at once and ran a2ensite * to enable them all at once. When I reloaded the configuration it failed and after restarting apache I found the following error message in my error.log: Oops, no RSA or DSA server certificate found for 'server.host.name:0'?! Most of the results for this error message are years old that don't fix the problem or are bugs that have been fixed https://issues.apache.org/bugzilla/show_bug.cgi?id=31709

  Read the article

• How can I open urls on my host machine with VMWARE?

  - by Yanamon

  I am running a Windows 7 vm with WMware player from Fedora. I have VMWare tools installed successfully and I have successfully some of it's features like Unity mode so it seems to be installed correctly. That being said I still cannot get urls to open up in my host machine's browsers, these are the steps I have taken: Within the vm I set "Default Host Application" to be the application to open urls. Within my host machine I have set Chrome to be my preferred application for opening urls. Enabled Shared Folders in the vm (Not sure if that really helped anything but I saw it suggested on a forum post) After doing that when I click on a link I get the following error message: Default host Application: Make sure the virtual machine's configuration allows the guest to open host applications. I cannot find any option like that in my vm's configuration so I am not sure what the error message is referring to.

  Read the article

• STUN-server using AWS

  - by Yrlec

  We are about to hire some consultants to help us set up an AWS-based server environment that will enable us to handle NAT Traversal for our P2P application. One important part of the NAT Traversal infrastructure is the STUN-server (http://en.wikipedia.org/wiki/STUN). They just told us that in order for the STUN-server to work you must have two public static IP-addresses pointing to the same server. To more specific they said this: It appears that you need 2 static IPs for each server for the STUN to work. Please note, these IPs have to be put into the configuration file, therefore, each time you restart the instance you have to make sure you either use the same IPs or you have to update configuration. As you plan to use AWS for your installation, please confirm that you can have 2 static IP for each server. Our question is if this is possible using AWS and if so, how? If not, do you know any other way to set up a STUN-server using AWS?

  Read the article

• Cisco ASA Hairpinning with Dynamic IP

  - by Joseph Sturtevant

  I currently have my Cisco ASA 5505 firewall configured to forward port 80 from the outside interface to a host on my dmz interface. I also need to allow clients on my inside interface to access the host in the dmz by entering the public ip / dns record in their browsers. I was able to do that by following the instructions here, resulting in the following configuration: static (dmz,outside) tcp interface www 192.168.1.5 www netmask 255.255.255.255 static (dmz,inside) tcp 74.125.45.100 www 192.168.1.5 www netmask 255.255.255.255 (Where 74.125.45.100 is my public IP and 192.168.1.5 is the IP of the dmz host) This works great except for the fact that my network has a dynamic public IP and this configuration will therefore break as soon as my public IP changes. Is there a way to do what I want with a dynamic ip? Note: Adding an internal DNS record won't solve my problem since I have multiple dmz hosts mapped to different ports on the public IP.

  Read the article

• Bugzilla with SSL

  - by Antitribu

  I have an install of Bugzilla I'm trying to implement SSL on. When I go into the parameters screen and edit SSLBASE adding in the full url: https://foo.com/bugzilla/ the editparams.cgi times out on loading and I have the following error in the apache log [Tue Mar 30 19:29:39 2010] [error] [client xxx.xx.xx.xx ] (70007)The timeout specified has expired: ap_content_length_filter: apr_bucket_read() failed, referer: http://foo.com/bugzilla/editparams.cgi On install I also received this error: WARNING: You need to set the max_allowed_packet parameter in your MySQL configuration to at least 3276750. Currently it is set to 3275776. You can set this parameter in the [mysqld] section of your MySQL configuration file. How can I force this to work? Editing other parameters (eg urlbase) work fine. The SSL site is setup and direct requests to it eg https://foo.com/bugzilla work correctly. Any ideas? Ty

  Read the article

• Configuring IIS7 for TLS 1.0 only

  - by tomfanning

  I have been tasked with configuring an IIS7 server to accept TLS 1.0 HTTPS connections only. I have come up with the following list of cipher suites which I have deduced are TLS 1.0. TLS_DHE_DSS_WITH_3DES_EDE_CBC_SHA TLS_DHE_DSS_WITH_AES_128_CBC_SHA TLS_DHE_DSS_WITH_AES_256_CBC_SHA TLS_RSA_WITH_3DES_EDE_CBC_SHA TLS_RSA_WITH_AES_128_CBC_SHA TLS_RSA_WITH_AES_256_CBC_SHA I have put that list in the box in the following policy: Computer Configuration | Administrative Templates | Network | SSL Configuration Settings | SSL Cipher Suite Order Is that sufficient? Are any of the suites in my list not TLS 1.0? Are there any other TLS 1.0 suites supported by IIS7 that aren't in the list? The server, by the way, is Windows Server 2008 R2. Thanks

  Read the article

• Getting WCF Services in a Silverlight solution to play nice on deployment

  - by brendonpage

  I have come across 2 issues with deploying WCF services in a Silverlight solution, admittedly the one is more of a hiccup, and only occurs if you take the easy way out and reference your services through visual studio. The First Issue This occurs when you deploy your WFC services to an IIS server. When browse to the services using your web browser, you are greeted with “This collection already contains an address with scheme http.  There can be at most one address per scheme in this collection.”. When you make a call to this service from your Silverlight application, you get the extremely helpful “NotFound” error, this error message can be found in the error property of the event arguments on the complete event handler for that call. As it did with me this will leave most people scratching their head, because the very same services work just fine on the ASP.NET Development Web Server and on my local IIS server. Now I’m no server/hosting/IIS expert so I did a bit of searching when I first encountered this issue. I found out this happens because IIS supports multiple address bindings per protocol (http/https/ftp … etc) per web site, but WCF only supports binding to one address per protocol. This causes a problem when the WCF service is hosted on a site with multiple address bindings, because IIS provides all of the bindings to the host factory when running the service. While this problem occurs mainly on shared hosting solutions, it is not limited to shared hosting, it just seems like all shared hosting providers setup sites on their servers with multiple address bindings. For interests sake I added functionality to the example project attached to this post to dump the addresses given to the WCF service by IIS into a log file. This was the output on the shared hosting solution I use: http://mydomain.co.za/Services/TestService.svc http://www.mydomain.co.za/Services/TestService.svc http://mydomain-co-za.win13.wadns.net/Services/TestService.svc http://win13/Services/TestService.svc As you can see all these addresses are for the http protocol, which is where it all goes wrong for WCF. Fixes for the First Issue There are a few ways to get around this. The first being the easiest, target .NET 4! Yes that's right in .NET 4 WCF services support multiple addresses per protocol. This functionality is enabled by an option, which is on by default if you create a new project, you will need to turn on if you are upgrading to .NET 4. To do this set the multipleSiteBindingsEnabled property of the serviceHostingEnviroment tag in the web.config file to true, as shown below: <system.serviceModel>     <serviceHostingEnvironment multipleSiteBindingsEnabled="true" /> </system.serviceModel> Beware this ONLY works in .NET 4, so if you don’t have a server with .NET 4 installed on that you can deploy to, you will need to employ one of the other work a rounds. The second option will work for .NET 3.5 & 4. For this option all you need to do is modify the web.config file and add baseAddressPrefixFilters to the serviceHostingEnviroment tag as shown below: <system.serviceModel>     <serviceHostingEnvironment>         <baseAddressPrefixFilters>              <add prefix="http://www.mydomain.co.za"/>         </baseAddressPrefixFilters>     </serviceHostingEnvironment> </system.serviceModel> These will be used to filter the list of base addresses that IIS provides to the host factory. When specifying these prefix filters be sure to specify filters which will only allow 1 result through, otherwise the entire exercise will be pointless. There is however a problem with this work a round, you are only allowed to specify 1 prefix filter per protocol. Which means you can’t add filters for all your environments, this will therefore add to the list of things to do before deploying or switching dev machines. The third option is the one I currently employ, it will work for .NET 3, 3.5 & 4, although it is not needed for .NET 4. For this option you create a custom host factory which inherits from the ServiceHostFactory class. In the implementation of the ServiceHostFactory you employ logic to figure out which of the base addresses, that are give by IIS, to use when creating the service host. The logic you use to do this is completely up to you, I have seen quite a few solutions that simply statically reference an index from the list of base addresses, this works for most situations but falls short in others. For instance, if the order of the base addresses where to change, it might end up returning an address that only resolves on the servers local network, like the last one in the example I gave at the beginning. Another instance, if a request comes in on a different protocol, like https, you will be creating the service host using an address which is on the incorrect protocol, like http. To reliably find the correct address to use, I use the address that the service was requested on. To accomplish this I use the HttpContext, which requires the service to operate with AspNetCompatibilityRequirements set on. If for some reason running you services with AspNetCompatibilityRequirements on isn’t an option, you can still use this method, you will just have to come up with your own logic for selecting the correct address. First you will need to enable AspNetCompatibilityRequirements for your hosting environment, to do this you will need to set it to true in the web.config file as shown below: <system.serviceModel>     <serviceHostingEnvironment AspNetCompatibilityRequirements="true" /> </system.serviceModel> You will then need to mark any services that are going to use the custom host factory, to allow AspNetCompatibilityRequirements, as shown below: [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class TestService { } Now for the custom host factory, this is where the logic lives that selects the correct address to create service host with. The one i use is shown below: public class CustomHostFactory : ServiceHostFactory { protected override ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) { // // Compose a prefix filter based on the requested uri // string prefixFilter = HttpContext.Current.Request.Url.Scheme + "://" + HttpContext.Current.Request.Url.DnsSafeHost; if (!HttpContext.Current.Request.Url.IsDefaultPort) { prefixFilter += ":" + HttpContext.Current.Request.Url.Port.ToString() + "/"; } // // Find a base address that matches the prefix filter // foreach (Uri baseAddress in baseAddresses) { if (baseAddress.OriginalString.StartsWith(prefixFilter)) { return new ServiceHost(serviceType, baseAddress); } } // // Throw exception if no matching base address was found // throw new Exception("Custom Host Factory: No base address matching '" + prefixFilter + "' was found."); } } The most important line in the custom host factory is the one that returns a new service host. This has to return a service host that specifies only one base address per protocol. Since I filter by the address the request came on in, I only need to create the service host with one address, since this address will always be of the correct protocol. Now you have a custom host factory you have to tell your services to use it. To do this you view the markup of the service by right clicking on it in the solution explorer and choosing “View Markup”. Then you add/set the value of the Factory property to the full namespace path of you custom host factory, as shown below. And that is it done, the service will now use the specified custom host factory. The Second Issue As I mentioned earlier this issue is more of a hiccup, but I thought worthy of a mention so I included it. This issue only occurs when you add a service reference to a Silverlight project. Visual Studio will generate a lot of code for you, part of that generated code is the ServiceReferences.ClientConfig file. This file stores the endpoint configuration that is used when accessing your services using the generated proxy classes. Here is what that file looks like: <configuration>     <system.serviceModel>         <bindings>             <customBinding>                 <binding name="CustomBinding_TestService">                     <binaryMessageEncoding />                     <httpTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" />                 </binding>                 <binding name="CustomBinding_BrokenService">                     <binaryMessageEncoding />                     <httpTransport maxReceivedMessageSize="2147483647" maxBufferSize="2147483647" />                 </binding>             </customBinding>         </bindings>         <client>             <endpoint address="http://localhost:49347/services/TestService.svc"                 binding="customBinding" bindingConfiguration="CustomBinding_TestService"                 contract="TestService.TestService" name="CustomBinding_TestService" />             <endpoint address="http://localhost:49347/Services/BrokenService.svc"                 binding="customBinding" bindingConfiguration="CustomBinding_BrokenService"                 contract="BrokenService.BrokenService" name="CustomBinding_BrokenService" />         </client>     </system.serviceModel> </configuration> As you will notice the addresses for the end points are set to the addresses of the services you added the service references from, so unless you are adding the service references from your live services, you will have to change these addresses before you deploy. This is little more than an annoyance really, but it adds to the list of things to do before you can deploy, and if left unchecked that list can get out of control. Fix for the Second Issue The way you would usually access a service added this way is to create an instance of the proxy class like so: BrokenServiceClient proxy = new BrokenServiceClient(); Closer inspection of these generated proxy classes reveals that there are a few overloaded constructors, one of which allows you to specify the end point address to use when creating the proxy. From here all you have to do is come up with some logic that will provide you with the relative path to your services. Since my WCF services are usually hosted in the same project as my Silverlight app I use the class shown below: public class ServiceProxyHelper { /// <summary> /// Create a broken service proxy /// </summary> /// <returns>A broken service proxy</returns> public static BrokenServiceClient CreateBrokenServiceProxy() { Uri address = new Uri(Application.Current.Host.Source, "../Services/BrokenService.svc"); return new BrokenServiceClient("CustomBinding_BrokenService", address.AbsoluteUri); } } Then I will create an instance of the proxy class using my service helper class like so: BrokenServiceClient proxy = ServiceProxyHelper.CreateBrokenServiceProxy(); The way this works is “Application.Current.Host.Source” will return the URL to the ClientBin folder the Silverlight app is hosted in, the “../Services/BrokenService.svc” is then used as the relative path to the service from the ClientBin folder, combined by the Uri object this gives me the URL to my service. The “CustomBinding_BrokenService” is a reference to the end point configuration in the ServiceReferences.ClientConfig file. Yes this means you still need the ServiceReferences.ClientConfig file. All this is doing is using a different end point address than the one specified in the ServiceReferences.ClientConfig file, all the other settings form the ServiceReferences.ClientConfig file are still used when creating the proxy. I have uploaded an example project which covers the custom host factory solution from the first issue and everything from the second issue. I included the code to write a list of base addresses to a log file in my implementation of the custom host factory, this is not need for the custom host factory to function and can safely be removed. Download (WCFServicesDeploymentExample.zip)

  Read the article

• Changing Endpoint URL for a Web Service Data Control

  - by vishal.s.jain(at)oracle.com

  When you move your application from Development to Production, there is more often then not, a need to change the web service endpoint URL in your ADF application. If you are using a Web Service Data Control(WSDC), you can do this in more than one ways. The following example illustrates how this can be done.At Design TimeIf the application workspace is in your control, you can quickly do this by updating the definition in DataControl.dcx file:Along with this, you will also need to change the endpoint in connections.xml. So invoke the Edit Connections dialog: Then, change the endpoint URL.At DeploymentAnother way to change is changing the endpoint at the ear level, at deployment. So when you select Deploy -> Application Server at the Application level, it will bring up a Deployment Configuration dialog, in which you can edit the WSDL URL:Also, change the Port URL:At Post DeploymentIf your need to change this post deployment, you can do it through Oracle Enterprise Manager. But for this, your application needs to be configured with a writable MDS repository. It is recommended you use a Database MDS store during deployment. So have your application configured (by having an entry in adf-config.xml) and server configured (by having a MDS store registered). Once done, you can configure the ADF Connection in EM for this application:Change the WSDL location here on 'Edit':Also, change the Port using Advance Connection Configuration:Change the Endpoint Address here:Apply Changes and you are done!

  Read the article

• Unity - Mecanim & Rigidbody on Third Person Controller - Gravity bug?

  - by Celtc

  I'm working on a third person controller which uses physX to interact with the other objects (using the Rigidbody component) and Mecanim to animate the character. All the animations used are baked to Y, and the movement on this axis is controlled by the gravity applied by the rigidbody component. The configuration of the falling animation: And the character components configuration: Since the falling animation doesn't have root motion on XZ, I move the character on XZ by code. Like this: // On the Ground if (IsGrounded()) { GroundedMovementMgm(); // Stores the velocity velocityPreFalling = rigidbody.velocity; } // Mid-Air else { // Continue the pre falling velocity rigidbody.velocity = new Vector3(velocityPreFalling.x, rigidbody.velocity.y, velocityPreFalling.z); } The problem is that when the chracter starts falling and hit against a wall in mid air, it gets stuck to the wall. Here are some pics which explains the problems: Hope someone can help me. Thanks and sory for my bad english! PD.: I was asked for the IsGrounded() function, so I'm adding it: void OnCollisionEnter(Collision collision) { if (!grounded) TrackGrounded(collision); } void OnCollisionStay(Collision collision) { TrackGrounded(collision); } void OnCollisionExit() { grounded = false; } public bool IsGrounded() { return grounded; } private void TrackGrounded(Collision collision) { var maxHeight = capCollider.bounds.min.y + capCollider.radius * .9f; foreach (var contact in collision.contacts) { if (contact.point.y < maxHeight && Vector3.Angle(contact.normal, Vector3.up) < maxSlopeAngle) { grounded = true; break; } } } I'll also add a LINK to download the project if someone wants it.

  Read the article

• April 2013 Release of the Ajax Control Toolkit

  - by Stephen.Walther

  I’m excited to announce the April 2013 release of the Ajax Control Toolkit. For this release, we focused on improving two controls: the AjaxFileUpload and the MaskedEdit controls. You can download the latest release from CodePlex at http://AjaxControlToolkit.CodePlex.com or, better yet, you can execute the following NuGet command within Visual Studio 2010/2012: There are three builds of the Ajax Control Toolkit: .NET 3.5, .NET 4.0, and .NET 4.5. A Better AjaxFileUpload Control We completely rewrote the AjaxFileUpload control for this release. We had two primary goals. First, we wanted to support uploading really large files. In particular, we wanted to support uploading multi-gigabyte files such as video files or application files. Second, we wanted to support showing upload progress on as many browsers as possible. The previous version of the AjaxFileUpload could show upload progress when used with Google Chrome or Mozilla Firefox but not when used with Apple Safari or Microsoft Internet Explorer. The new version of the AjaxFileUpload control shows upload progress when used with any browser. Using the AjaxFileUpload Control Let me walk-through using the AjaxFileUpload in the most basic scenario. And then, in following sections, I can explain some of its more advanced features. Here’s how you can declare the AjaxFileUpload control in a page: <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:AjaxFileUpload ID="AjaxFileUpload1" AllowedFileTypes="mp4" OnUploadComplete="AjaxFileUpload1_UploadComplete" runat="server" /> The exact appearance of the AjaxFileUpload control depends on the features that a browser supports. In the case of Google Chrome, which supports drag-and-drop upload, here’s what the AjaxFileUpload looks like: Notice that the page above includes two Ajax Control Toolkit controls: the AjaxFileUpload and the ToolkitScriptManager control. You always need to include the ToolkitScriptManager with any page which uses Ajax Control Toolkit controls. The AjaxFileUpload control declared in the page above includes an event handler for its UploadComplete event. This event handler is declared in the code-behind page like this: protected void AjaxFileUpload1_UploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Save uploaded file to App_Data folder AjaxFileUpload1.SaveAs(MapPath("~/App_Data/" + e.FileName)); } This method saves the uploaded file to your website’s App_Data folder. I’m assuming that you have an App_Data folder in your project – if you don’t have one then you need to create one or you will get an error. There is one more thing that you must do in order to get the AjaxFileUpload control to work. The AjaxFileUpload control relies on an HTTP Handler named AjaxFileUploadHandler.axd. You need to declare this handler in your application’s root web.config file like this: <configuration> <system.web> <compilation debug="true" targetFramework="4.5" /> <httpRuntime targetFramework="4.5" maxRequestLength="42949672" /> <httpHandlers> <add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </httpHandlers> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false"/> <handlers> <add name="AjaxFileUploadHandler" verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="4294967295"/> </requestFiltering> </security> </system.webServer> </configuration> Notice that the web.config file above also contains configuration settings for the maxRequestLength and maxAllowedContentLength. You need to assign large values to these configuration settings — as I did in the web.config file above — in order to accept large file uploads. Supporting Chunked File Uploads Because one of our primary goals with this release was support for large file uploads, we added support for client-side chunking. When you upload a file using a browser which fully supports the HTML5 File API — such as Google Chrome or Mozilla Firefox — then the file is uploaded in multiple chunks. You can see chunking in action by opening F12 Developer Tools in your browser and observing the Network tab: Notice that there is a crazy number of distinct post requests made (about 360 distinct requests for a 1 gigabyte file). Each post request looks like this: http://localhost:24338/AjaxFileUploadHandler.axd?contextKey={DA8BEDC8-B952-4d5d-8CC2-59FE922E2923}&fileId=B7CCE31C-6AB1-BB28-2940-49E0C9B81C64 &fileName=Sita_Sings_the_Blues_480p_2150kbps.mp4&chunked=true&firstChunk=false Each request posts another chunk of the file being uploaded. Notice that the request URL includes a chunked=true parameter which indicates that the browser is breaking the file being uploaded into multiple chunks. Showing Upload Progress on All Browsers The previous version of the AjaxFileUpload control could display upload progress only in the case of browsers which fully support the HTML5 File API. The new version of the AjaxFileUpload control can display upload progress in the case of all browsers. If a browser does not fully support the HTML5 File API then the browser polls the server every few seconds with an Ajax request to determine the percentage of the file that has been uploaded. This technique of displaying progress works with any browser which supports making Ajax requests. There is one catch. Be warned that this new feature only works with the .NET 4.0 and .NET 4.5 versions of the AjaxControlToolkit. To show upload progress, we are taking advantage of the new ASP.NET HttpRequest.GetBufferedInputStream() and HttpRequest.GetBufferlessInputStream() methods which are not supported by .NET 3.5. For example, here is what the Network tab looks like when you use the AjaxFileUpload with Microsoft Internet Explorer: Here’s what the requests in the Network tab look like: GET /WebForm1.aspx?contextKey={DA8BEDC8-B952-4d5d-8CC2-59FE922E2923}&poll=1&guid=9206FF94-76F9-B197-D1BC-EA9AD282806B HTTP/1.1 Notice that each request includes a poll=1 parameter. This parameter indicates that this is a polling request to get the size of the file buffered on the server. Here’s what the response body of a request looks like when about 20% of a file has been uploaded: Buffering to a Temporary File When you upload a file using the AjaxFileUpload control, the file upload is buffered to a temporary file located at Path.GetTempPath(). When you call the SaveAs() method, as we did in the sample page above, the temporary file is copied to a new file and then the temporary file is deleted. If you don’t call the SaveAs() method, then you must ensure that the temporary file gets deleted yourself. For example, if you want to save the file to a database then you will never call the SaveAs() method and you are responsible for deleting the file. The easiest way to delete the temporary file is to call the AjaxFileUploadEventArgs.DeleteTemporaryData() method in the UploadComplete handler: protected void AjaxFileUpload1_UploadComplete(object sender, AjaxControlToolkit.AjaxFileUploadEventArgs e) { // Save uploaded file to a database table e.DeleteTemporaryData(); } You also can call the static AjaxFileUpload.CleanAllTemporaryData() method to delete all temporary data and not only the temporary data related to the current file upload. For example, you might want to call this method on application start to ensure that all temporary data is removed whenever your application restarts. A Better MaskedEdit Extender This release of the Ajax Control Toolkit contains bug fixes for the top-voted issues related to the MaskedEdit control. We closed over 25 MaskedEdit issues. Here is a complete list of the issues addressed with this release: · 17302 MaskedEditExtender MaskType=Date, Mask=99/99/99 Undefined JS Error · 11758 MaskedEdit causes error in JScript when working with 2-digits year · 18810 Maskededitextender/validator Date validation issue · 23236 MaskEditValidator does not work with date input using format dd/mm/yyyy · 23042 Webkit based browsers (Safari, Chrome) and MaskedEditExtender · 26685 MaskedEditExtender@(ClearMaskOnLostFocus=false) adds a zero character when you each focused to target textbox · 16109 MaskedEditExtender: Negative amount, followed by decimal, sets value to positive · 11522 MaskEditExtender of AjaxtoolKit-1.0.10618.0 does not work properly for Hungarian Culture · 25988 MaskedEditExtender – CultureName (HU-hu) > DateSeparator · 23221 MaskedEditExtender date separator problem · 15233 Day and month swap in Dynamic user control · 15492 MaskedEditExtender with ClearMaskOnLostFocus and with MaskedEditValidator with ClientValidationFunction · 9389 MaskedEditValidator – when on no entry · 11392 MaskedEdit Number format messed up · 11819 MaskedEditExtender erases all values beyond first comma separtor · 13423 MaskedEdit(Extender/Validator) combo problem · 16111 MaskedEditValidator cannot validate date with DayMonthYear in UserDateFormat of MaskedEditExtender · 10901 MaskedEdit: The months and date fields swap values when you hit submit if UserDateFormat is set. · 15190 MaskedEditValidator can’t make use of MaskedEditExtender’s UserDateFormat property · 13898 MaskedEdit Extender with custom date type mask gives javascript error · 14692 MaskedEdit error in “yy/MM/dd” format. · 16186 MaskedEditExtender does not handle century properly in a date mask · 26456 MaskedEditBehavior. ConvFmtTime : function(input,loadFirst) fails if this._CultureAMPMPlaceholder == “” · 21474 Error on MaskedEditExtender working with number format · 23023 MaskedEditExtender’s ClearMaskOnLostFocus property causes problems for MaskedEditValidator when set to false · 13656 MaskedEditValidator Min/Max Date value issue Conclusion This latest release of the Ajax Control Toolkit required many hours of work by a team of talented developers. I want to thank the members of the Superexpert team for the long hours which they put into this release.

  Read the article

• growing EBS RAID volume

  - by Ryan Fernandes

  I've created a RAID0 configuration with two 1GB EBS volumes, mounted at /dev/md0 using mdadm and formatted with XFS Next, I copied some files over to fill the volume to around 30% of its capacity (of 2GB) I then created snapshots of the volumes using ec2-consistent-snapshot and created volumes of the said snapshots but specified the volume size to be 2GB (effective doubling the capacity on each disk) I then spun up a new instance, assembled the RAID0 configuration on /dev/md0 from the 2 volumes mentioned above and mount it to /vol df -hT showed /vol as 2GB (as expected) Now I ran sudo xfs_growfs -d /vol. The command completed normally but reported blocks changed from 523776 to 524160 (only!) and df -hT still showed /vol as 2GB (instead of the expected 4GB) I rebooted, remounted, reassembled the RAID but it still reports the old size. Any clue as to what went wrong?

  Read the article

• Laptop with Intel Graphics: external VGA monitor only gets signal on boot (no "hot plugging")

  - by iveand

  I am able to get an external VGA monitor (or projector) to work if I start my laptop with it connected. However, if I start the laptop with it disconnected there is no signal on the external. The Displays screen shows the external, and thinks that it is active, but there is no signal being sent to it. This has been a persistent problem since 10.04 (I am now on 12.04.... each upgrade hoping something is improved). I should note that even when it works (starting with display connected), Displays still says the monitor is "unknown" (but it sends the signal). For the correct resolution to display, I have had to add a few xrandr lines for my monitor to my .xprofile file... otherwise resolution is limited to default 1024x768. So, resolution issues can be worked around, but the main issue is that the external doesn't get a signal without starting the machine with it connected. I have tried: adding i915.modeset=1 to grub (also i965.modeset=1 since someone posted that this helped even though lshw shows i915) adding following ppa and doing a dist-upgrade: sudo add-apt-repository ppa:xorg-edgers/ppa Here are the details: Laptop: Toshiba Tecra M10 lspci listings for video: 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) sudo lshw -C video listing: *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:ff400000-ff7fffff memory:e0000000-efffffff ioport:cff8(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:ffc00000-ffcfffff "System Info" shows my graphics as the following Mobile Intel® GM45 Express Chipset x86/MMX/SSE2

  Read the article

• Generic HTTP 500 Error Message On Hosted Sites (like GoDaddy)

  - by Jimbo

  I decided to post this because I battled to find out how to do it and couldnt see anything on Stackoverflow about it. Often when you host with a provider like GoDaddy, they have "Custom Error Messages" set to ON. What I didnt realise was that the web.config settings dont just apply to ASP.NET, they apply to all applications on YOUR IIS site and hence will sort this problem out for Classic ASP as well (very few GoDaddy support people even know this) All you need to do is add the following to your web.config OR, for those using Classic ASP, just create a web.config file in your ROOT with this code in it. <configuration> <system.webServer> <asp scriptErrorSentToBrowser="true"/> <httpErrors errorMode="Detailed"/> </system.webServer> </configuration>

  Read the article

• Unable to uninstall maas completely

  - by user210844

  I'm not able to uninstall MAAS sudo apt-get purge maas ; sudo apt-get autoremove Reading package lists... Done Building dependency tree Reading state information... Done Package 'maas' is not installed, so not removed 0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up maas-region-controller (1.2+bzr1373+dfsg-0ubuntu1) ... Considering dependency proxy for proxy_http: Module proxy already enabled Module proxy_http already enabled Module expires already enabled Module wsgi already enabled sed: -e expression #1, char 91: unterminated `s' command dpkg: error processing maas-region-controller (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of maas-dns: maas-dns depends on maas-region-controller (= 1.2+bzr1373+dfsg-0ubuntu1); however: Package maas-region-controller is not configured yet. dpkg: error processing maas-dns (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: maas-region-controller maas-dns E: Sub-process /usr/bin/dpkg returned an error code (1) Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Setting up maas-region-controller (1.2+bzr1373+dfsg-0ubuntu1) ... Considering dependency proxy for proxy_http: Module proxy already enabled Module proxy_http already enabled Module expires already enabled Module wsgi already enabled sed: -e expression #1, char 91: unterminated `s' command dpkg: error processing maas-region-controller (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already dpkg: dependency problems prevent configuration of maas-dns: maas-dns depends on maas-region-controller (= 1.2+bzr1373+dfsg-0ubuntu1); however: Package maas-region-controller is not configured yet. dpkg: error processing maas-dns (--configure): dependency problems - leaving unconfigured No apport report written because MaxReports is reached already Errors were encountered while processing: maas-region-controller maas-dns E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• JMX Based Monitoring - Part One

  - by Anthony Shorten

  In all versions of the Oracle Utilities Application Framework there is an ability to use Java Management eXtensions (JMX) to both manage and monitor the various components of the product. This means that sites can use a JSR120 compliant JMX browser or JMX console to view or manage the components of the product with little or no configuration required. In each version we have progressively added JMX capabilities to allow IT groups more detailed information. In Oracle Utilities Application Framework V2.1 and above it was possible to use JMX on the Web Application Server provided Mbeans to allow you to monitor the online component of the product as well as manage the configuration. Also with a few additional java options it is possible to get a good level of detail about the Java Virtual machine including memory and thread usage. In Oracle Utilities Application Framework V2.2 and above, we added support for Java 5 statistics (Java enabled them by default), database pool statistics and also added the ability to manage and moinitor the batch component of the architecture. Now, in Oracle Utilities Application Framework V4 and above, we added support for Java 6 MXBeans, online management of the cache using JMX, additional JVM information and Performance monitoring using JMX. JMX allows the product to be managed from a common console such as Oracle Enterprise Manager, Tivoli, HP OpenView (and a lot more). Over the next week or so I will be compiling a set of blog entries discussing what is available (in summary format) using JMX and how to get access to the JMX statistics for your version of the product.

  Read the article

• postfix relaying all mail through office365 problems

  - by amrith

  This is a rather long question with a long list of things tried and travails so please bear with me. The summary is this. I am able to relay email from ubuntu through office365 using postfix; the configuration works. It only works as one of the users; more specifically the user who authenticates against office365 is the only valid "from" More details follow. I have a machine in Amazon's cloud on which I run a bunch of jobs and would like to have statuses mailed over to me. I use office365 at work so I want to relay mail through office365. I'm most familiar with postfix so I used that as the MTA. Configuration is ubuntu 12.04LTS; I've installed postfix and mail-utils. For this example, let me say my company is "company.com" and the machine in question (through an elastic IP and a DNS entry) is called "plaything.company.com". hostname is set to "plaything.company.com", so is /etc/mailname On plaything, I have the following users registered alpha, bravo, and charlie. I have the following configuration files. alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix inet_interfaces = all inet_protocols = ipv4 mailbox_size_limit = 0 mydestination = plaything.company.com, localhost.company.com, , localhost myhostname = plaything.company.com mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relayhost = [smtp.office365.com]:587 sender_canonical_maps = hash:/etc/postfix/sender_canonical smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = noanonymous smtp_sasl_tls_security_options = noanonymous smtp_tls_CAfile = /etc/ssl/certs/ca-certificates.crt smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtp_use_tls = yes smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes As the machine is called plaything.company.com I went through the exercise of registering all the appropriate DNS entries to make office365 recognize that I owned plaything.company.com and allowed me to create a user called [email protected] in office365. In office365, I setup [email protected] as having another email address of [email protected]. Then, I made the following sender_canonical [email protected] [email protected] I created a sasl_passwd file that reads: smtp.office365.com [email protected]:123456password123456 let's just say that the password for [email protected] is 1234...456 With all this setup, login as alpha and mail [email protected] Cc: Subject: test test and the whole thing works wonderfully. email gets sent off by postfix, TLS works like a champ, authenticates as daemon@... and [email protected] in Office365 gets an email message. The issue comes up when logged in as bravo to the machine. sender is [email protected] and office365 says: status=bounced (host smtp.office365.com[132.245.12.25] said: 550 5.7.1 Client does not have permissions to send as this sender (in reply to end of DATA command)) this is because I'm trying to send mail as bravo@... and authenticating with office365 as daemon@.... The reason it works with alpha@... is because in office365, I setup [email protected] as having another email address of [email protected]. In Postfix Relay to Office365, Miles Erickson answers the question thusly: Don't send mail to Office365 as a user from your Office365-hosted e-mail domain. Use a subdomain instead, e.g. [email protected] instead of [email protected]. It wouldn't hurt to set up an SPF record for services.mydomain.com or whatever you decide to use. Don't authenticate against mail.messaging.microsoft.com as an Office365 user. Just connect on port 25 and deliver the mail to your domain as any foreign SMTP agent would do. OK, I've done #1, I have those records on DNS but for the most part they are not relevant once Office365 recognizes that I own the domain. Here are those records: CNAME records: - msoid.plaything.company.com - autodiscover.plaything.company.com MX record: - plaything.company.com (plaything-company-com.mail.protection.outlook.com) TXT record: - plaything.company.com (v=spf1 include:spf.protection.outlook.com -all) I've tried #2 but no matter what I do, office365 just blows away the connection with "not authenticated". I can try even a simple telnet to port 25 and attempt to send and it doesn't work. 250 BY2PR01CA007.outlook.office365.com Hello [54.221.245.236] 530 5.7.1 Client was not authenticated Connection closed by foreign host. Is there someone out there who has this kind of a configuration working where multiple users on a linux machine are able to relay mail using postfix through office365? There has to be someone out there doing this who can tell me what is wrong with my setup ...

  Read the article

• How to permanently add wireless interfaces with iw

  - by walli

  How can I permanently add virtual wireless interfaces to my network configuration with iw? I created the following interfaces: iw phy phy0 interface add vwlan0 type station iw phy phy0 interface add vwlan1 type __ap The first is configured as a wifi client connecting to an existing network (wpa_supplicant) The second is configured as wireless hotspot (hostapd + dnsmasq) The setup works, but now I can't quite figure out what the best strategy is to save this configuration permanently. Have made an init script for wpa_supplicant Have made an init script for the hotspot Virtual adaptor network settings set in /etc/network/interfaces But all this depends on the wireless interfaces being created. What would be the best way to make sure these interfaces are created before the network is set up and the services are run? As a bonus, since this wireless interface is a usb device, would it be possible to have the interfaces created (and the services started) when the interface is hotplugged? I know you can execute code after a network interface is up, but the wlan0 interface that is hotplugged should never be up. Operating system is raspbian

  Read the article

• Broadcom NIC Teaming with Hyper-V R2

  - by Brian McCleary

  I have read a few contradictory articles regarding support or at least configuration with teaming of Broadcom NIC's and Hyper-V. I have a pair of Dell R805's with 4 Broadcom 5708 NIC's in them. I have teamed them up (one team for public connections and one for private connections) and I have installed Hyper-V. I am getting some intermittent connection issues though and I'm concerned that it might be due to the teaming. Basically I am wondering if anyone has successfully setup NIC teaming in the parent partition and used the teamed adapters through the Hyper-V switch. If so, what is the configuration/proper steps that you used to configure this. I have the server running Windows Server 2008 R2. Right now the server is in test mode, but my concern is that we won't see any issues until we move it into production and get some heavy traffic on the ports.

  Read the article

• OpenSUSE Yast permissions for user

  - by pajton

  I have an OpenSUSE 11.4 box with Kde 4.6. I am currently working to create a sandbox environment for the user, let's call hime bob. Bob isn't allowed to do much in the system, but I'd like to let him configure certain things in yast. I have dektop shortcuts for particular yast modules, e.g. the shortcut executes xdg-su -c "/sbin/yast2 lan" to launch yast lan configuration. Now, I do not want Bob to have to enter password to launch this configuration (just please don't tell me it's insecure - I know this, in this particular setting it is going to be OK). I wanted to do this with setuid, but obiously setting it on *.desktop shortcut doesn't work. There is sudo approach, but I would have to allow Bob to use all yast modules. So, is there anything more fine-grained to set the permissions for exact yast modules? Thanks in advance!

  Read the article

• Visual Studio confused when there are multiple system.web sections in your web.config

  - by Jeff Widmer

  I am trying to start debugging in Visual Studio for the website I am currently working on but Visual Studio is telling me that I have to enable debugging in the web.config to continue: But I clearly have debugging enabled: At first I chose the option to Modify the Web.config file to enable debugging but then I started receiving the following exception on my site: HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. Config section 'system.web/compilation' already defined. Sections must only appear once per config file. See the help topic <location> for exceptions   So what is going on here?  I already have debug=”true”, Visual Studio tells me I do not, and then when I give Visual Studio permission to fix the problem, I get a configuration error. Eventually I tracked it down to having two <system.web> sections. I had defined customErrors higher in the web.config: And then had a second system.web section with compilation debug=”true” further down in the web.config.  This is valid in the web.config and my site was not complaining but I guess Visual Studio does not know how to handle it and sees the first system.web, does not see the debug=”true” and thinks your site is not set up for debugging. To fix this so that Visual Studio was not going to complain, I removed the duplicate system.web declaration and moved the customErrors statement down.

  Read the article

• Installation procedure RAC One Node

  - by rene.kundersma

  Okay, In order to test RAC One Node, on my Oracle VM Laptop, I just: - installed Oracle VM 2.2 - Created two OEL 5.3 images The two images are fully prepared for Oracle 11gr2 Grid Infrastructure and 11gr2 RAC including four shared disks for ASM and private nics. After installation of the Oracle 11gr2 Grid Infrastructure and a "software only installation" of 11gr2 RAC, I installed patch 9004119 as you can see with the opatch lsinv output: This patch has the scripts required to administer RAC One Node, you will see them later. At the moment we have them available for Linux and Solaris. After installation of the patch, I created a RAC database with an instance on one node. Please note that the "Global Database Name" has to be the same as the SID prefix and should be less then or equal to 8 characters: When the database creation is done, first I create a service. This is because RAC One Node needs to be "initialized" each time you add a service: The service configuration details are: After creating the service, a script called raconeinit needs to run from $RDBMS_HOME/bin. This is a script supplied by the patch. I can imagine the next major patch set of 11gr2 has this scripts available by default. The script will configure the database to run on other nodes: After initialization, when you would run raconeinit again, you would see: So, now the configuration is ready and we are ready to run 'Omotion' and move the service around from one node to the other (yes, vm competitor: this is service is available during the migration, nice right ?) . Omotion is started by running Omotion. With Omotion -v you get verbose output: So, during the migration you will see the two instance active: And, after the migration, there is only one instance left on the new node:

  Read the article

• Setup LAN to serve webpages and voip and access to the web site from inside LAN with domain name

  - by Mauricio Arias

  I'd like to know if it will work: I have my domain and I´m serving a webpage in a nginx to the internet, but if I type my domain in my laptop inside LAN I access to my modem/router configuration, I cannot access to the web server unless I type the IP address. I would like to add a Bind server after the modem/router - (port forward, ports 80 and 5060), if the request is www.mydomain.com bind should resolve the nginx IP address and serve it, and if it is a voip request should address to the voip server and if I'd like to access to the website from inside LAN I'd like to type mydomain.com. Could I do it with this configuration? Do I need something else? Thanks in advace!

  Read the article

• Nginx + CodeIgniter + Invision power board rewrite rule probem.

  - by Ufuk

  Hello, I have a setup where I have a folder structre like: / /application /system /forum index.php My ngix configuration: if (!-f $request_filename) { rewrite ^/(.*)$ /index.php/$1 last; } location ~ /index.php { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include /usr/local/nginx/conf/fastcgi_params; fastcgi_param SCRIPT_FILENAME /var/www/vhosts/mydomain.com/httpdocs/index.php; } This setup works correctly and redirects urls to correct controller of codeigniter yet it does also forward www.mydomain.com/forum to codeigniter, which eventually shows a 404 page of CodeIgniter. Does anyone know the correct configuration for my setups? Thank you.

  Read the article

• Running a simple integration scenario using the Oracle Big Data Connectors on Hadoop/HDFS cluster

  - by hamsun

  Between the elephant ( the tradional image of the Hadoop framework) and the Oracle Iron Man (Big Data..) an english setter could be seen as the link to the right data Data, Data, Data, we are living in a world where data technology based on popular applications , search engines, Webservers, rich sms messages, email clients, weather forecasts and so on, have a predominant role in our life. More and more technologies are used to analyze/track our behavior, try to detect patterns, to propose us "the best/right user experience" from the Google Ad services, to Telco companies or large consumer sites (like Amazon:) ). The more we use all these technologies, the more we generate data, and thus there is a need of huge data marts and specific hardware/software servers (as the Exadata servers) in order to treat/analyze/understand the trends and offer new services to the users. Some of these "data feeds" are raw, unstructured data, and cannot be processed effectively by normal SQL queries. Large scale distributed processing was an emerging infrastructure need and the solution seemed to be the "collocation of compute nodes with the data", which in turn leaded to MapReduce parallel patterns and the development of the Hadoop framework, which is based on MapReduce and a distributed file system (HDFS) that runs on larger clusters of rather inexpensive servers. Several Oracle products are using the distributed / aggregation pattern for data calculation ( Coherence, NoSql, times ten ) so once that you are familiar with one of these technologies, lets says with coherence aggregators, you will find the whole Hadoop, MapReduce concept very similar. Oracle Big Data Appliance is based on the Cloudera Distribution (CDH), and the Oracle Big Data Connectors can be plugged on a Hadoop cluster running the CDH distribution or equivalent Hadoop clusters. In this paper, a "lab like" implementation of this concept is done on a single Linux X64 server, running an Oracle Database 11g Enterprise Edition Release 11.2.0.4.0, and a single node Apache hadoop-1.2.1 HDFS cluster, using the SQL connector for HDFS. The whole setup is fairly simple: Install on a Linux x64 server ( or virtual box appliance) an Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 server Get the Apache Hadoop distribution from: http://mir2.ovh.net/ftp.apache.org/dist/hadoop/common/hadoop-1.2.1. Get the Oracle Big Data Connectors from: http://www.oracle.com/technetwork/bdc/big-data-connectors/downloads/index.html?ssSourceSiteId=ocomen. Check the java version of your Linux server with the command: java -version java version "1.7.0_40" Java(TM) SE Runtime Environment (build 1.7.0_40-b43) Java HotSpot(TM) 64-Bit Server VM (build 24.0-b56, mixed mode) Decompress the hadoop hadoop-1.2.1.tar.gz file to /u01/hadoop-1.2.1 Modify your .bash_profile export HADOOP_HOME=/u01/hadoop-1.2.1 export PATH=$PATH:$HADOOP_HOME/bin export HIVE_HOME=/u01/hive-0.11.0 export PATH=$PATH:$HADOOP_HOME/bin:$HIVE_HOME/bin (also see my sample .bash_profile) Set up ssh trust for Hadoop process, this is a mandatory step, in our case we have to establish a "local trust" as will are using a single node configuration copy the new public keys to the list of authorized keys connect and test the ssh setup to your localhost: We will run a "pseudo-Hadoop cluster", in what is called "local standalone mode", all the Hadoop java components are running in one Java process, this is enough for our demo purposes. We need to "fine tune" some Hadoop configuration files, we have to go at our $HADOOP_HOME/conf, and modify the files: core-site.xml hdfs-site.xml mapred-site.xml check that the hadoop binaries are referenced correctly from the command line by executing: hadoop -version As Hadoop is managing our "clustered HDFS" file system we have to create "the mount point" and format it , the mount point will be declared to core-site.xml as: The layout under the /u01/hadoop-1.2.1/data will be created and used by other hadoop components (MapReduce = /mapred/...) HDFS is using the /dfs/... layout structure format the HDFS hadoop file system: Start the java components for the HDFS system As an additional check, you can use the GUI Hadoop browsers to check the content of your HDFS configurations: Once our HDFS Hadoop setup is done you can use the HDFS file system to store data ( big data : )), and plug them back and forth to Oracle Databases by the means of the Big Data Connectors ( which is the next configuration step). You can create / use a Hive db, but in our case we will make a simple integration of "raw data" , through the creation of an External Table to a local Oracle instance ( on the same Linux box, we run the Hadoop HDFS one node cluster and one Oracle DB). Download some public "big data", I use the site: http://france.meteofrance.com/france/observations, from where I can get *.csv files for my big data simulations :). Here is the data layout of my example file: Download the Big Data Connector from the OTN (oraosch-2.2.0.zip), unzip it to your local file system (see picture below) Modify your environment in order to access the connector libraries , and make the following test: [oracle@dg1 bin]$./hdfs_stream Usage: hdfs_stream locationFile [oracle@dg1 bin]$ Load the data to the Hadoop hdfs file system: hadoop fs -mkdir bgtest_data hadoop fs -put obsFrance.txt bgtest_data/obsFrance.txt hadoop fs -ls /user/oracle/bgtest_data/obsFrance.txt [oracle@dg1 bg-data-raw]$ hadoop fs -ls /user/oracle/bgtest_data/obsFrance.txt Found 1 items -rw-r--r-- 1 oracle supergroup 54103 2013-10-22 06:10 /user/oracle/bgtest_data/obsFrance.txt [oracle@dg1 bg-data-raw]$hadoop fs -ls hdfs:///user/oracle/bgtest_data/obsFrance.txt Found 1 items -rw-r--r-- 1 oracle supergroup 54103 2013-10-22 06:10 /user/oracle/bgtest_data/obsFrance.txt Check the content of the HDFS with the browser UI: Start the Oracle database, and run the following script in order to create the Oracle database user, the Oracle directories for the Oracle Big Data Connector (dg1 it’s my own db id replace accordingly yours): #!/bin/bash export ORAENV_ASK=NO export ORACLE_SID=dg1 . oraenv sqlplus /nolog <<EOF CONNECT / AS sysdba; CREATE OR REPLACE DIRECTORY osch_bin_path AS '/u01/orahdfs-2.2.0/bin'; CREATE USER BGUSER IDENTIFIED BY oracle; GRANT CREATE SESSION, CREATE TABLE TO BGUSER; GRANT EXECUTE ON sys.utl_file TO BGUSER; GRANT READ, EXECUTE ON DIRECTORY osch_bin_path TO BGUSER; CREATE OR REPLACE DIRECTORY BGT_LOG_DIR as '/u01/BG_TEST/logs'; GRANT READ, WRITE ON DIRECTORY BGT_LOG_DIR to BGUSER; CREATE OR REPLACE DIRECTORY BGT_DATA_DIR as '/u01/BG_TEST/data'; GRANT READ, WRITE ON DIRECTORY BGT_DATA_DIR to BGUSER; EOF Put the following in a file named t3.sh and make it executable, hadoop jar $OSCH_HOME/jlib/orahdfs.jar \ oracle.hadoop.exttab.ExternalTable \ -D oracle.hadoop.exttab.tableName=BGTEST_DP_XTAB \ -D oracle.hadoop.exttab.defaultDirectory=BGT_DATA_DIR \ -D oracle.hadoop.exttab.dataPaths="hdfs:///user/oracle/bgtest_data/obsFrance.txt" \ -D oracle.hadoop.exttab.columnCount=7 \ -D oracle.hadoop.connection.url=jdbc:oracle:thin:@//localhost:1521/dg1 \ -D oracle.hadoop.connection.user=BGUSER \ -D oracle.hadoop.exttab.printStackTrace=true \ -createTable --noexecute then test the creation fo the external table with it: [oracle@dg1 samples]$ ./t3.sh ./t3.sh: line 2: /u01/orahdfs-2.2.0: Is a directory Oracle SQL Connector for HDFS Release 2.2.0 - Production Copyright (c) 2011, 2013, Oracle and/or its affiliates. All rights reserved. Enter Database Password:] The create table command was not executed. The following table would be created. CREATE TABLE "BGUSER"."BGTEST_DP_XTAB" ( "C1" VARCHAR2(4000), "C2" VARCHAR2(4000), "C3" VARCHAR2(4000), "C4" VARCHAR2(4000), "C5" VARCHAR2(4000), "C6" VARCHAR2(4000), "C7" VARCHAR2(4000) ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY "BGT_DATA_DIR" ACCESS PARAMETERS ( RECORDS DELIMITED BY 0X'0A' CHARACTERSET AL32UTF8 STRING SIZES ARE IN CHARACTERS PREPROCESSOR "OSCH_BIN_PATH":'hdfs_stream' FIELDS TERMINATED BY 0X'2C' MISSING FIELD VALUES ARE NULL ( "C1" CHAR(4000), "C2" CHAR(4000), "C3" CHAR(4000), "C4" CHAR(4000), "C5" CHAR(4000), "C6" CHAR(4000), "C7" CHAR(4000) ) ) LOCATION ( 'osch-20131022081035-74-1' ) ) PARALLEL REJECT LIMIT UNLIMITED; The following location files would be created. osch-20131022081035-74-1 contains 1 URI, 54103 bytes 54103 hdfs://localhost:19000/user/oracle/bgtest_data/obsFrance.txt Then remove the --noexecute flag and create the external Oracle table for the Hadoop data. Check the results: The create table command succeeded. CREATE TABLE "BGUSER"."BGTEST_DP_XTAB" ( "C1" VARCHAR2(4000), "C2" VARCHAR2(4000), "C3" VARCHAR2(4000), "C4" VARCHAR2(4000), "C5" VARCHAR2(4000), "C6" VARCHAR2(4000), "C7" VARCHAR2(4000) ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY "BGT_DATA_DIR" ACCESS PARAMETERS ( RECORDS DELIMITED BY 0X'0A' CHARACTERSET AL32UTF8 STRING SIZES ARE IN CHARACTERS PREPROCESSOR "OSCH_BIN_PATH":'hdfs_stream' FIELDS TERMINATED BY 0X'2C' MISSING FIELD VALUES ARE NULL ( "C1" CHAR(4000), "C2" CHAR(4000), "C3" CHAR(4000), "C4" CHAR(4000), "C5" CHAR(4000), "C6" CHAR(4000), "C7" CHAR(4000) ) ) LOCATION ( 'osch-20131022081719-3239-1' ) ) PARALLEL REJECT LIMIT UNLIMITED; The following location files were created. osch-20131022081719-3239-1 contains 1 URI, 54103 bytes 54103 hdfs://localhost:19000/user/oracle/bgtest_data/obsFrance.txt This is the view from the SQL Developer: and finally the number of lines in the oracle table, imported from our Hadoop HDFS cluster SQL select count(*) from "BGUSER"."BGTEST_DP_XTAB"; COUNT(*) ---------- 1151 In a next post we will integrate data from a Hive database, and try some ODI integrations with the ODI Big Data connector. Our simplistic approach is just a step to show you how these unstructured data world can be integrated to Oracle infrastructure. Hadoop, BigData, NoSql are great technologies, they are widely used and Oracle is offering a large integration infrastructure based on these services. Oracle University presents a complete curriculum on all the Oracle related technologies: NoSQL: Introduction to Oracle NoSQL Database Using Oracle NoSQL Database Big Data: Introduction to Big Data Oracle Big Data Essentials Oracle Big Data Overview Oracle Data Integrator: Oracle Data Integrator 12c: New Features Oracle Data Integrator 11g: Integration and Administration Oracle Data Integrator: Administration and Development Oracle Data Integrator 11g: Advanced Integration and Development Oracle Coherence 12c: Oracle Coherence 12c: New Features Oracle Coherence 12c: Share and Manage Data in Clusters Oracle Coherence 12c: Oracle GoldenGate 11g: Fundamentals for Oracle Oracle GoldenGate 11g: Fundamentals for SQL Server Oracle GoldenGate 11g Fundamentals for Oracle Oracle GoldenGate 11g Fundamentals for DB2 Oracle GoldenGate 11g Fundamentals for Teradata Oracle GoldenGate 11g Fundamentals for HP NonStop Oracle GoldenGate 11g Management Pack: Overview Oracle GoldenGate 11g Troubleshooting and Tuning Oracle GoldenGate 11g: Advanced Configuration for Oracle Other Resources: Apache Hadoop : http://hadoop.apache.org/ is the homepage for these technologies. "Hadoop Definitive Guide 3rdEdition" by Tom White is a classical lecture for people who want to know more about Hadoop , and some active "googling " will also give you some more references. About the author: Eugene Simos is based in France and joined Oracle through the BEA-Weblogic Acquisition, where he worked for the Professional Service, Support, end Education for major accounts across the EMEA Region. He worked in the banking sector, ATT, Telco companies giving him extensive experience on production environments. Eugen currently specializes in Oracle Fusion Middleware teaching an array of courses on Weblogic/Webcenter, Content,BPM /SOA/Identity-Security/GoldenGate/Virtualisation/Unified Comm Suite) throughout the EMEA region.

  Read the article

< Previous Page | 150 151 152 153 154 155 156 157 158 159 160 161  | Next Page >