Search Results

Search found 15985 results on 640 pages for 'debug print'.

Page 157/640 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• Make isolinux 4.0.3 chainload itself in VMWare

  - by chainloader

  I have a bootable iso which boots into isolinux 4.0.3 and I want to make it chainload itself (my actual goal is to chainload isolinux.bin v4.0.1-debian, which should start up the Ubuntu10.10 Live CD, but for now I just want to make it chainload itself). I can't get isolinux to chainload any isolinux.bin, no matter what version. It either freezes or shows a "checksum error" message. I'm using VMWare to test the iso. Things I have tried: .com32 /boot/isolinux/chain.c32 /boot/isolinux/isolinux-debug.bin (chainload self) this shows Loading the boot file... Booting... ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Main image LBA = 53F00100 ...and the machine freezes. Then I've tried this (chainload GRUB4DOS 0.4.5b) chainloader /boot/isolinux/isolinux-debug.bin Result: Error 13: Invalid or unsupported executable format Next try: (chainload GRUB4DOS 0.4.5b) chainloader --force /boot/isolinux/isolinux-debug.bin boot Result: ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: No boot info table, assuming single session disk... isolinux: Spec packet missing LBA information, trying to wing it... isolinux: Main image LBA = 00000686 isolinux: Image checksum error, sorry... Boot failed: press a key to retry... I have tried other things, but all of them failed miserably. Any suggestions?

  Read the article

• printing parallel over ethernet cable

  - by Crudler

  I have a bit of an interesting challenge :) I have a machine with a parallel printer output, i want it to be able to print instead to a printer in a different room and i know that parallel isnt great over big distances. i found this: http://www.amazon.com/over-Cat5-Extension-Cable-Adapter/dp/B002WJ9S6Y%3FSubscriptionId%3DAKIAINHICTCYYZGJWT4Q%26tag%3Dusbprintercables.net-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB002WJ9S6Y which will let me connect over cat5, but its usb to cat 5. my machine can only output on parallel (its not a computer) so what i was thinking of getting is a parallel(f) to usb and usb to parallel (M) for either side i.e. machine - parallel - usb - cat5 - usb - parallel -printer just seems a bit messy :) suggestions? another thing i would like to try is to get rid of the old school parallel printer and instead use a network based multi function. would this be possible? i.e. machine - parallel -usb - cat5 - ethernet print server - network printer this might be rougher because the machine cannot "know" that we are using a network printer. it can ONLY print to LPT1 Thanks!

  Read the article

• Immediately tell which output was sent to stderr

  - by Clinton Blackmore

  When automating a task, it is sensible to test it first manually. It would be helpful, though, if any data going to stderr was immediately recognizeable as such, and distinguishable from the data going to stdout, and to have all the output together so it is obvious what the sequence of events is. One last touch that would be nice is if, at program exit, it printed its return code. All of these things would aid in automating. Yes, I can echo the return code when a program finishes, and yes, I can redirect stdout and stderr; what I'd really like it some shell, script, or easy-to-use redirector that shows stdout in black, shows stderr interleaved with it in red, and prints the exit code at the end. Is there such a beast? [If it matters, I'm using Bash 3.2 on Mac OS X]. Update: Sorry it has been months since I've looked at this. I've come up with a simple test script: #!/usr/bin/env python import sys print "this is stdout" print >> sys.stderr, "this is stderr" print "this is stdout again" In my testing (and probably due to the way things are buffered), rse and hilite display everything from stdout and then everything from stderr. The fifo method gets the order right but appears to colourize everything following the stderr line. ind complained about my stdin and stderr lines, and then put the output from stderr last. Most of these solutions are workable, as it is not atypical for only the last output to go to stderr, but still, it'd be nice to have something that worked slightly better.

  Read the article

• Server 2003 Terminal Services Printers not redirecting, no sessions created.

  - by mikerdz

  Ok, odd scenario on a Windows Server 2003 Server Standard running as Terminal Server. Friday, installed 2 new Windows 7 machines to replace older XP machines. After adding these machines and their local printers, none of the otehr 16 Windows 7 machines can redirect printing to the server. I have checked Global Policy on domain controller, nothing is being blocked. In Terminal Services Manager, the client settings are set to User Client Settings. On RDP client, port redirection is enabled. I have tried disabling the Use Client Settings option and manually selected the options for print redirection and default printer connection, but still does not work. After some reaserching, I found this MS article: http://support.microsoft.com/kb/2492632 I went ahead and added the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\Wds\rdpwd\fEnablePrintRDR DWORD that the article references and set it to "1" to enable the option. I restarted the server, but still would not print. I am getting quite desperate with this issue because nothing seems to have changed when installing the two new clients and printers. I uninstalled the print drivers for the printers from the server. I have even gone as far as connecting each of the printers manually via UPD (\computername\printer) but even thought it works, it prints awfully slow. Please help!!!!

  Read the article

• Apache2 Segmentation fault with wsgi_module

  - by a coder

  Apache 2.2.3 is running as an existing web server under RHEL 5. Attempting to set up Trac using wsgi_module. RHEL 5 ships with python 2.4, so in order to use the current version of Trac (1.0) I needed to install it with easy_install-2.6. Trac works with the default mod_python, however users strongly encourage not using this module as it is officially dead. Using RHEL's package manager, I downloaded/installed python26-mod_wsgi.so. I backed up the httpd.conf, then made the following additions: LoadModule wsgi_module modules/python26-mod_wsgi.so #...# WSGIScriptAlias /trac /www/virtualhosts/trac/deploy/cgi-bin/trac.wsgi <Directory /www/virtualhosts/trac/deploy/cgi-bin> WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> Next I moved trac.conf to trac.conf.bak (contains mod_python calls). I tested the configuration using: apachectl configtest Syntax is OK. So I reloaded the server config using: service httpd reload At this time, all virtualhosted sites stopped responding. I restored my backup copy of httpd.conf, reloaded the server config, and the virtualhosted sites are being served again. A quick look at the httpd error_log shows: [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28282): Initializing Python. [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28280): Attach interpreter ''. [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1817): proxy: grabbed scoreboard slot 0 in child 28283 for worker proxy:reverse [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1836): proxy: worker proxy:reverse already initialized [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1930): proxy: initialized single connection worker 0 in child 28283 for (*) [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28283): Initializing Python. [Mon Oct 08 10:20:04 2012] [notice] child pid 28249 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28250 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28251 exit signal Segmentation fault (11) There are many similar lines, this is just a snip of the log file. Suggestions on what could be going on to cause the Segmentation faults?

  Read the article

• mod_cache not working

  - by Pistos

  I have a PHP site that has many dynamically generated pages. I'm trying to turn to mod_cache to help boost performance, because in most cases, content does not change in a given day. I have configured mod_cache as best I could, following examples around the web, including the mod_cache page on apache.org. When I set LogLevel debug, I see a bit of information about the caching that is [not] happening. There are plenty of pairs of lines like this: [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(141): Adding CACHE_SAVE filter for /foo/bar [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(148): Adding CACHE_REMOVE_URL filter for /foo/bar Which is fine, because I've set CacheEnable disk /foo, to indicate that I want everything under /foo cached. I'm new to mod_cache, but my understanding about these lines is that it just means that mod_cache has acknowledged that the URL is supposed to be cached, but there are supposed to be more lines indicating that it is saving the data to cache, and then later retrieving them on subsequent hits to the same URL. I can hit the same URL till I'm blue in the face, whether with F5 refreshing, or not, or with different browsers, or different computers. It's always that pair of lines that shows in the logs, and nothing else. When I set CacheEnable disk /, then I see more activity. But I don't want to cache the entire site, and there are many, many different subpaths to the site, so I don't want to have to modify code to set no-cache headers in all the necessary places. I'll mention that mod_rewrite is in use here, rewriting /foo/bar to something like index.php?baz=/foo/bar, but my understanding is that mod_cache uses the pre-rewrite URL, not the post-rewrite URL. As far as I can tell, I have the response headers not getting in the way of caching. Here's an example from one hit: Cache-Control:must-revalidate, max-age=3600 Connection:Keep-Alive Content-Encoding:gzip Content-Length:16790 Content-Type:text/html Date:Fri, 01 Jun 2012 21:43:09 GMT Expires:Fri, 1 Jun 2012 18:43:09 -0400 Keep-Alive:timeout=15, max=100 Pragma: Server:Apache Vary:Accept-Encoding mod_cache config is as follows: CacheRoot /var/cache/apache2/ CacheDirLevels 3 CacheDirLength 2 CacheEnable disk /foo What is getting in the way of mod_cache doing its job of caching?

  Read the article

• Make isolinux 4.0.3 chainload itself

  - by chainloader

  I have a bootable iso which boots into isolinux 4.0.3 and I want to make it chainload itself (my actual goal is to chainload isolinux.bin v4.0.1-debian, which should start up the Ubuntu10.10 Live CD, but for now I just want to make it chainload itself). I can't get isolinux to chainload any isolinux.bin, no matter what version. It either freezes or shows a "checksum error" message. I'm using VMWare to test the iso. Things I have tried: .com32 /boot/isolinux/chain.c32 /boot/isolinux/isolinux-debug.bin (chainload self) this shows Loading the boot file... Booting... ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: Main image LBA = 53F00100 ...and the machine freezes. Then I've tried this (chainload GRUB4DOS 0.4.5b) chainloader /boot/isolinux/isolinux-debug.bin Result: Error 13: Invalid or unsupported executable format Next try: (chainload GRUB4DOS 0.4.5b) chainloader --force /boot/isolinux/isolinux-debug.bin boot Result: ISOLINUX 4.03 2010-10-22 Copyright (C) 1994-2010 H. Peter Anvin et al isolinux: Starting up, DL = 9F isolinux: Loaded spec packet OK, drive = 9F isolinux: No boot info table, assuming single session disk... isolinux: Spec packet missing LBA information, trying to wing it... isolinux: Main image LBA = 00000686 isolinux: Image checksum error, sorry... Boot failed: press a key to retry... I have tried other things, but all of them failed miserably. Any suggestions?

  Read the article

• Why won't my service start, and why doesn't upstart output any errors?

  - by Alex Waters

  I am trying to 'start gunicorn' as a service via upstart as user ale. I'm using gunicorn/flask on ubuntu 12.04 w/ init (upstart 1.5) Here is my /etc/init/gunicorn.conf setuid btw setgid flask script export HOME=/home/btw export WORKON_HOME=$HOME/.virtualenvs . $HOME/.virtualenvs/default/bin/activate cd $HOME/flask workon default gunicorn -c gunicorn.py bw:app end script It doesn't output anything other than gunicorn start/running, process 12992. If i then do 'status gunicorn' I get stop/waiting. any ideas on how to debug this? I tried following http://upstart.ubuntu.com/wiki/Debugging but it didn't help. If I do the following as user ale in the app's directory: 1. workon default 2. gunicorn -c gunicorn.py bw:app then Gunicorn runs fine. Here is ~/flask/gunicorn.py: bind = "0.0.0.0:8080" workers = 3 backlog = 2048 worker_class = "gevent" debug = True daemon = False pidfile ="/tmp/gunicorn.pid" log_level = "debug" accesslog = "/var/log/gunicorn/access.log" errorlog = "/var/log/gunicorn/error.log" user = "btw" group = "flask" Also, /var/log/error.log doesn't show anything new when I try to start the Gunicorn service. If I start it manually, it shows that the workers have been loaded, etc. Thanks for any help / suggestions!

  Read the article

• Debugging apache seg fault with gdb

  - by Joyce Babu

  Apache on a production server of mine is seg faulting intermittently. I have enabled core dump option in apache configuration and have several dumped core files. Unfortunately, since it is a production server, apache or the loaded modules are not compiled with debug symbols. From what I understand, gdb cannot do much without debug symbols. Can I at least find out which module is causing the seg fault, without debug symbols? If so, how? Following is the output from a gdb backtrace (gdb) bt full #0 0xb7f1f832 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2 No symbol table info available. #1 0xb7be82bc in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0 No symbol table info available. #2 0xb771652a in ?? () from /usr/local/apache/modules/mod_pagespeed.so No symbol table info available. #3 0xb75df576 in ?? () from /usr/local/apache/modules/mod_pagespeed.so No symbol table info available. #4 0xb7715c20 in ?? () from /usr/local/apache/modules/mod_pagespeed.so No symbol table info available. #5 0xb7be4a49 in start_thread () from /lib/libpthread.so.0 No symbol table info available. #6 0xb7b2a63e in clone () from /lib/libc.so.6 No symbol table info available. Does this mean that /lib/ld-linux.so.2 is causing the seg fault?

  Read the article

• Windows 7 can't see wireless printer

  - by Chance Robertson

  I have a P1102W printer from HP. I have a Windows 7 machine. I have a MacBook Pro. I setup the printer following the instructions from the Windows 7 machine. I am able to print from the Mac but not the Windows 7 machine. And to add, I am not able to print from any Windows 7 machines. The MacBook Pro address is 198.168.2.115, the Windows machine is 192.168.2.117, and the printer in 192.168.2.140. I can ping the printer from the Mac. I can ping the Windows 7 machine from the mac. I can ping the mac from the windows 7 machine. When I try to ping the printer from the Windows 7 machine I get destination unreachable. I can browse to the printer IP address from the mac and not the Windows 7. I have turned off the firewall on the Windows 7 machine and turned on network sharing. Is there something else I am missing. I can connect the printer with a USB cable to the Windows machine and print. I can not get the Windows machine to see the printer even though they are on the same network.

  Read the article

• Printing special / extended characters on web page - Firefox or printer issue?

  - by edmicman

  My dad brought this to my attention and I'm looking into it, but thought I'd post here and see if anyone has any ideas... He's running Win7, using Firefox and printing to a wireless connected Brother HL-2170W printer. He's got a web page (http://cornandsoybeandigest.com/inputs/fertilizer/applying-nitrogen-after-planting-0512/index.html) that has extended/special characters in it - the funny "a" in Fernandez. The characters show correctly in Firefox on the page. He printed it, and the extended "a" printed as a diamond with a question mark. He says it shows that way in the print preview, too. I pulled up the same page in Ubuntu, Firefox, and it displayed in my print preview and physically printed everything correctly. I just checked on my wife's Win7 PC in Firefox and the print preview looked correct on her system, too. We have a Brother 2040 here. Soooo, my question is, is this possibly a problem in the browser somehow, or the printer driver? I'm leaning towards the printer driver now, but I can't say I've run into this before. Is it a setting somewhere? I just installed this printer for him the other day, using the CD that came with it; I could try updating the driver from Brother's website I guess. Is there anything else I should look at or check? Thanks!

  Read the article

• Cronjob not Running

  - by Pete Herbert Penito

  I have a bash script that looks like this: #!/bin/sh PID=`ps faux | grep libt | awk 'NR==2{print $2}'` STATUS=`ps faux | grep libt | awk 'NR==2{print $1}'` if [ "$STATUS" = "ec2-user" ]; then echo "libt already killed" else sudo kill $PID echo "libt was killed" fi sleep 5 cd /home/ec2-user/libt sudo ./libt I have saved this file as restart.sh and when I run it like ./restart.sh, it does what its supposed to (kills the libt process and restarts it). However, now I am trying to automate the process by using cron. So I made a cron job that I want to run every 6 hours that looks like this 0 */6 * * * /home/ec2-user/restart.sh When I run "crontab -l" I can see this print so I know it's been added properly. I should mention that the service does not have the ability to be restarted, (like "service ... restart") the process ID needs to be found, killed and then the start script needs to be ran. I have found that this cronjob is not working, I'll log onto the box and I can tell by looking at the logs that no restart has occurred. What am I doing wrong? What can I do to troubleshoot? Any advice would help, this is my first cron job :) Thanks!

  Read the article

• Deleted printers keeps coming back - and multiply

  - by MojoDK

  My users are on 2012 R2 RDS Session Host servers. I've used "Deploy Printers" (from Print Manager) to deploy 4 printers. The last week, I've had a lot of problems where users can't print. If I deleted the printer and added it again, they could print just fine. Now I've removed all printer deploying from GPO - and I have no printers in any login scripts. I did a gpupdate /force, but all the 4 printers are now listed 3 times... If I delete the printers and log off and back on, all the printers are popping up again. Sigh! This is driving me nuts. This script doesn't show any of the "SVFREJA" printers... Set objWMIService = GetObject("winmgmts:\\.\root\cimv2") Set colPrinters = objWMIService.ExecQuery ("Select * From Win32_Printer") If colPrinters.Count <> 0 Then 'If there are some network printers Dim s s = "" For Each objPrinterInstalled In colPrinters ' For each network printer s = s + objPrinterInstalled.Name + chr(13) Next msgbox s End if It gives me this result... (sry for the big picture) My problem is not with the "redirected" printers, my problem is that I have several printers with the same name (on SVFREJA) and I can't get rid of them. Any idea why I can't get rid of the "ophaned" printers??

  Read the article

• Input field separator in awk

  - by Matthijs

  I have many large data files. The delimiter between the fields is a semicolon. However, I have found that there are semicolons in some of the fields, so I cannot simply use the semicolon as a field separator. The following example has 4 fields, but awk sees only 3, because the '1' in field 3 is stripped by the regex (which includes a '-' because some of the numerical data are negative): echo '"This";"is";1;"line of; data"' | awk -F'[0-9"-];[0-9"-]' '{print "No. of fields:\t"NF; print "Field 3:\t" $3}' No. of fields: 3 Field 3: ;"line of; data" Of course, echo '"This";"is";1;"line of; data"' | awk -F';' '{print "No. of fields:\t"NF}' No. of fields: 5 solves that problem, but counts the last field as two separate fields. Does anyone know a solution to this? Thanks! Matthijs

  Read the article

• Wordpress on Apache is redirecting all https to http

  - by Krist van Besien

  I have a problem with a wordpress site on a server I admin. I don't know anything about wordpress however. My problem is that we want the site to be accessed over https, bot somehow all requests to https:// URLs are answered by the server with a 302, redirecting to http. The wordpress site itself is configured to use https, and we see that in the pages that are generated the links are all https links. In the apache config there are no rewrite rules and no redirects. However, any request to a https:// URL is answered with a redirect to the equivalent http URL. And I really would like to know where these redirects are coming from, what is generating these redirects. I've increased the loglevel on the webserver to DEBUG, but did not get any info there. I tried to enable debug logging in wordpress per the recipy I found here: http://codex.wordpress.org/Debugging_in_WordPress But did not get a debug.log file in the directory where one should appear. I'm really at a loss here, and need to fix this urgently. Any hints as where to start looking? Apache is 2.2.14 on Ubuntu. There are several other virtual hosts on this server, using php and https without any problem... Edit: I created a small info.php script and dropped that in the webservers' root. Calling this yields the output of the script, no redirect is generated. This suggest that it's not the webserver, but wordpress that is doing it. A second thing I noticed is that the redirect comes with several cookies, one of which has "httponly" set. Could that be it?

  Read the article

• How to flash Dell Precision 390 from linux (debian)

  - by malat

  I am trying to update my BIOS: $ sudo dmidecode -s bios-version 2.1.2 With a newer one: 2.6.0. I went to this page Dell Precision System BIOS, 2.6.0 After downloading the file WS390-020600.BIN, here is what it states: $ ./WS390-020600.BIN --help Usage: WS390-020600.BIN [options] Options: --help Print this text. --version Print package versions. If no options, update the BIOS. and $ ./WS390-020600.BIN --version Dell BIOS Update Installer 1.2 Copyright 2006 Dell Inc. All Rights Reserved. ./WS390-020600.BIN: 60: ./WS390-020600.BIN: ./flash: not found Does anyone knows where this flash command can be found ? Update: it looks like this is a self-extracting archive (need bash as per comment in header). $ head -30 WS390-020600.BIN [...] Extract() { tail -n +`awk '/^__ARC__/ { print NR + 1; exit 0; }' $0` $0 | gzip -cd >$_PRG So the flash command should have been auto-generated, however the above command does not appear to be running as original author intended. I do not see anything wrong with the command though.

  Read the article

• Xcopy "exited with code 9009"

  - by David Veeneman

  I am getting the following error, which I don't understand: Error 1 The command "xcopy "D:\Users\johndoe\Documents\Visual Studio 2008\Projects\MyProject\MyProject.Modules.Ribbon\bin\Debug\MyProject.Modules.Ribbon.dll" "D:\Users\johndoe\Documents\Visual Studio 2008\Projects\MyProject\MyProject\bin\Debug\Modules\" /Y" exited with code 9009. MyProject.Modules.Ribbon Any suggestions on how to fix this?

  Read the article

• Spring rejecting bean name, no URL paths specified

  - by richever

  I am trying to register an interceptor using a annotation-driven controller configuration. As far as I can tell, I've done everything correctly but when I try testing the interceptor nothing happens. After looking in the logs I found the following: 2010-04-04 20:06:18,231 DEBUG [main] support.AbstractAutowireCapableBeanFactory (AbstractAutowireCapableBeanFactory.java:452) - Finished creating instance of bean 'org.springframework.web.servlet.mvc.annotation.DefaultAnnotationHandlerMapping#0' 2010-04-04 20:06:18,515 DEBUG [main] handler.AbstractDetectingUrlHandlerMapping (AbstractDetectingUrlHandlerMapping.java:86) - Rejected bean name 'org.springframework.web.servlet.mvc.annotation.DefaultAnnotationHandlerMapping#0': no URL paths identified 2010-04-04 20:06:19,109 DEBUG [main] support.AbstractBeanFactory (AbstractBeanFactory.java:241) - Returning cached instance of singleton bean 'org.springframework.web.servlet.mvc.annotation.DefaultAnnotationHandlerMapping#0' Look at the second line of this log snippet. Is Spring rejecting the DefaultAnnotationHandlerMapping bean? And if so could this be the problem with my interceptor not working? Here is my application context: <?xml version="1.0" encoding="UTF-8"?> <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:p="http://www.springframework.org/schema/p" xmlns:context="http://www.springframework.org/schema/context" xmlns:mvc="http://www.springframework.org/schema/mvc" xsi:schemaLocation=" http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://www.springframework.org/schema/context http://www.springframework.org/schema/context/spring-context-3.0.xsd http://www.springframework.org/schema/mvc http://www.springframework.org/schema/mvc/spring-mvc-3.0.xsd" default-autowire="byName"> <!-- Configures the @Controller programming model --> <mvc:annotation-driven /> <!-- Scan for annotations... --> <context:component-scan base-package=" com.splash.web.controller, com.splash.web.service, com.splash.web.authentication"/> <bean id="authorizedUserInterceptor" class="com.splash.web.handler.AuthorizedUserInterceptor"/> <bean class="org.springframework.web.servlet.mvc.annotation.DefaultAnnotationHandlerMapping"> <property name="interceptors"> <list> <ref bean="authorizedUserInterceptor"/> </list> </property> </bean> Here is my interceptor: package com.splash.web.handler; import javax.servlet.http.HttpServletRequest; import javax.servlet.http.HttpServletResponse; import org.apache.log4j.Logger; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.web.servlet.handler.HandlerInterceptorAdapter; public class AuthorizedUserInterceptor extends HandlerInterceptorAdapter { @Override public boolean preHandle(HttpServletRequest request, HttpServletResponse response, Object handler) throws Exception { log.debug(">>> Operation intercepted..."); return true; } } Does anyone see anything wrong with this? What does the error I mentioned above actually mean and could it have any bearing on the interceptor not being called? Thanks!

  Read the article

• WIX installer with Custom Actions: "built by a runtime newer than the currently loaded runtime and cannot be loaded."

  - by Rimer

  I have a WIX installer that executes Custom Actions over the course of install. When I run the WIX installer, and it encounters its first Custom Action, the installer fails out, and I receive an error in the MSI log as follows: Action start 12:03:53: LoadBCAConfigDefaults. SFXCA: Extracting custom action to temporary directory: C:\DOCUME~1\ELOY06~1\LOCALS~1\Temp\MSI10C.tmp-\ SFXCA: Binding to CLR version v2.0.50727 Calling custom action WIXCustomActions!WIXCustomActions.CustomActions.LoadBCAConfigDefaults Error: could not load custom action class WIXCustomActions.CustomActions from assembly: WIXCustomActions System.BadImageFormatException: Could not load file or assembly 'WIXCustomActions' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded. File name: 'WIXCustomActions' at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.AppDomain.Load(String assemblyString) at Microsoft.Deployment.WindowsInstaller.CustomActionProxy.GetCustomActionMethod(Session session, String assemblyName, String className, String methodName) ... the specific problem from above is "System.BadImageFormatException: Could not load file or assembly 'WIXCustomActions' or one of its dependencies. This assembly is built by a runtime newer than the currently loaded runtime and cannot be loaded." The wordage of that error seems to indicate something like an incorrectly referenced .NET framework or something (I'm targeting 3.5 in both my custom actions and its dependencies), but I can't figure out where to make a change to address this problem. Any ideas? .... Not sure if this will help but it's the CustomActions package batch file I run to create the .dll package containing the custom action functions: =============== call "C:\Program Files\Microsoft Visual Studio 10.0\VC\vcvarsall.bat" @echo on cd "C:\development\trunk\PortalsDev\csharp\production\Installers\WIX\customactions\PAServicesWIXCustomActions" csc /target:library /r:"C:\program files\windows installer xml v3.6\sdk\microsoft.deployment.windowsinstaller.dll" /r:"C:\development\trunk\PortalsDev\csharp\production\Installers\WIX\customactions\PAServicesWIXCustomActions\bin\Debug\eLoyalty.PortalLib.dll" /out:"C:\development\trunk\PortalsDev\csharp\production\Installers\WIX\customactions\PAServicesWIXCustomActions\bin\Debug\WIXCustomActions.dll" CustomActions.cs cd "C:\Program Files\Windows Installer XML v3.6\SDK" makesfxca "C:\development\trunk\PortalsDev\csharp\production\Installers\WIX\customactions\PAServicesWIXCustomActions\bin\Debug\BatchCustomerAnalysisWIXCustomActionsPackage.dll" "c:\program files\windows installer xml v3.6\sdk\x86\sfxca.dll" "C:\development\trunk\PortalsDev\csharp\production\Installers\WIX\customactions\PAServicesWIXCustomActions\bin\Debug\WIXCustomActions.dll" customaction.config Microsoft.Deployment.WindowsInstaller.dll

  Read the article

• ksh: assigning function output to an array

  - by rcarson

  Why doesn't this work??? #!/bin/ksh # array testfunc() function testfunc { typeset -A env env=( one="motherload" ) print -r $env return 0 } testfunc # returns: ( one=motherload ) typeset -A testvar # segfaults on linux, memfaults on solaris testvar=$(testfunc) # segfaults on linux, memfaults on solaris print -r $testvar I am sure this has been asked before, but I am not sure what to search on and everything I have been trying to use for keywords is not bringing me any answers that relate to my problem.

  Read the article

• How to get fully qualified path of css file?

  - by Malcolm

  Hi, In ASP.NET MVC how do I get the fully qualified path to my css file by specifying the relative path. Eg Url.Content("~/Content/Print.css") This returns eg "/Content/Print.css" Where as I want http://www.mysite.com/Content/Printcss Understand the issue? Malcolm

  Read the article

• Problems upgrading VB.Net 2008 project into VS2010

  - by Brett Rigby

  Hi there, I have been upgrading several different VS2008 projects into VS2010 and have found a problem with VB.Net projects when they are converted. Once converted, the .vbproj files have changed from this in VS2008: <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' "> <DebugSymbols>true</DebugSymbols> <DebugType>full</DebugType> <DefineDebug>true</DefineDebug> <DefineTrace>true</DefineTrace> <OutputPath>bin\Debug\</OutputPath> <DocumentationFile>CustomerManager.xml</DocumentationFile> <WarningsAsErrors>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036</WarningsAsErrors> </PropertyGroup> To this in VS2010: <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' "> <DebugSymbols>true</DebugSymbols> <DebugType>full</DebugType> <DefineDebug>true</DefineDebug> <DefineTrace>true</DefineTrace> <OutputPath>bin\Debug\</OutputPath> <DocumentationFile>CustomerManager.xml</DocumentationFile> <NoWarn>42353,42354,42355</NoWarn> <WarningsAsErrors>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036</WarningsAsErrors> </PropertyGroup> The main difference, is that in the VS2010 version, the 42353,42354,42355 value has been added; Inside the IDE, this manifests itself as the following setting in the Project Properties | Compile section as: "Function returning intrinsic value type without return value" = None This isn't a problem when building code inside Visual Studio 2010, but when trying to build the code through our continuous integration scripts, it fails with the following errors: [msbuild] vbc : Command line error BC2026: warning number '42353' for the option 'nowarn' is either not configurable or not valid [msbuild] vbc : Command line error BC2026: warning number '42354' for the option 'nowarn' is either not configurable or not valid [msbuild] vbc : Command line error BC2026: warning number '42355' for the option 'nowarn' is either not configurable or not valid I couldn't find anything on Google for these messages, which is strange, as I am trying to find out why this is happening. Any suggestions as to why Visual Studio 2010's conversion wizard is doing this?

  Read the article

• Prevent * to be expanded in the bash script

  - by Alex Farber

  Linux bash script: #!/bin/bash function Print() { echo $1 } var="*" Print $var Execution results: alex@alex-linux:~/tmp$ ./sample-script sample-script "*" is expanded to the list of files, which is actually script itself. How can I prevent this and see actual variable value? In general case, var can be more complicated than "*", for example: "home/alex/mydir/*".

  Read the article

• django views question

  - by Hulk

  In my django views i have the following def create(request): query=header.objects.filter(id=a)[0] a=query.criteria_set.all() logging.debug(a.details) I get an error saying 'QuerySet' object has no attribute 'details' in the debug statement .What is this error and what should be the correct statemnt to query this.And the model corresponding to this is as follows where as the models has the following: class header(models.Model): title = models.CharField(max_length = 255) created_by = models.CharField(max_length = 255) def __unicode__(self): return self.id() class criteria(models.Model): details = models.CharField(max_length = 255) headerid = models.ForeignKey(header) def __unicode__(self): return self.id() Thanks..

  Read the article

• three20 linking error

  - by neha

  Hi all, After following all the instructions on http://three20.info/setup/existing to integrate three20 library into my project. I'm getting this linking error: duplicate symbol _TTCreateNonRetainingArray in /test Justmeans Photos App/Three20/Build/Products/Debug-iphonesimulator/libThree20Core.a(TTGlobalCore.o) and /test Justmeans Photos App/Three20/Build/Products/Debug-iphonesimulator/libThree20.a(TTGlobalCore.o) three20 static library Can anybody please help me make out this? Thanx in advance.

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >