Search Results

Search found 11766 results on 471 pages for 'info plist'.

Page 157/471 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• question about a sata read/write speed

  - by Joe

  I'm contemplating biting the bullet for an ssd drive in a server, obviously I know it will be MUCH faster than a regular 7200rpm sata2 3gbps drive. The nice thing about ssd's is often they post the read/write speed but that info isn't available for sata's so I'm just curious to know what a typical read/write speed would be for a seagate 120gb 7200rpm drive. I know it fluctuates from manufacturer and model series but I'm just looking for a guestimate.

  Read the article

• Find XP client DNS settings in the registry?

  - by jimmymcnulty

  I'm troubleshooting an issue and I need to find where client XP machines store their DNS information. I have a server with 3 NICs. 1 one of them has DNS information and two of them are in a private network not using DNS. It appears to be NameServer entry under System\CurrentControlSet\Services\TCPip\parameters\Interfaces\guid. Anywhere else that info would be found?

  Read the article

• Testing my Server for Traffic Spikes?

  - by Marco

  Is there a service I can use to test the reliability of my server? I need to check if my server can handle a large traffic spike. // Server info: Server runs Nginx 0.7.65 on CentOS 5.3, serving only static files.

  Read the article

• What's the reason to break HDD to few partitions for MDADM+LVM2?

  - by archer

  I'm using 2 HDDs each 1TB in size. I'm going to create MDADM+LVM2 over them. Initially I though about this partition layout: /dev/sda1 - 1Gb (boot) /dev/sda2 - 500Gb (md0) /dev/sda3 - 499Gb (md1) /dev/sdb1 - 1Gb (boot) /dev/sdb2 - 500Gb (md0) /dev/sdb3 - 499Gb (md1) md0 is going to be raid0 and md1 is going to be raid1 however, I found some info that this would be better to break each drive to more partitions (lets say 10 partitions 100Gb in size each). What's the reason of doing that?

  Read the article

• unknown reciever Esmtp

  - by Morteza Soltanabadiyan

  I found this in my log server: sm-mta[11410]: r9BKb6YY021119: to=<[email protected]>, ctladdr=<[email protected]> (33/33), delay=2+07:24:18, xdelay=00:00:01, mailer=esmtp, pri=29911032, relay=mail1.mkuku.com. [58.22.50.83], dsn=4.0.0, stat=Deferred: Connection refused by mail1.mkuku.com. This message is repeated every 10-30 seconds with a different "to" address. What is this? Is my server being used to send spam?

  Read the article

• phpmyadmin displays blank page after installing apc and memcached

  - by Nbrochu

  ii am running a lamp stack on centos 5.6 with php 5.3. i had installed phpmyadmin and it work. i was able to log in and do anything. Then i installed memcached and its php extension as well as apc and its php extension. i have restarted httpd and php info says that memcache and apc are installed and configured. My question is, why does php my admin now display a blank page after installing memcache and apc.

  Read the article

• Opscenter repair service times out. ERROR: Requested range intersects a local range [...]

  - by jlemire-zs

  My production cluster had the repair service enabled since april 16th with the default 9 days time to completion and repairs would complete properly. However, since may 22nd, it is being disabled automatically by Opscenter: From /var/log/opscenter/opscenterd.log: [...] 2014-06-03 21:13:47-0400 [zs_prod] ERROR: Repair task (<Node 10.1.0.22='6417880425364517165'>, (-4019838962446882275L, -4006140687792135587L), set(['zs_logging', 'OpsCenter'])) timed out after 3600 seconds. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: Repair task (<Node 10.1.0.22='6417880425364517165'>, (-4006140687792135587L, -4006140687792135586L), set(['zs_logging', 'OpsCenter'])) timed out after 3600 seconds. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: More than 100 errors during repair service, shutting down repair service 2014-06-03 22:16:44-0400 [zs_prod] INFO: Stopping repair service [...] From /var/log/opscenter/repair_service/zs_prod.log: [...] 2014-06-03 22:16:44-0400 [zs_prod] ERROR: Repair task (<Node 10.1.0.22='6417880425364517165'>, (-4006140687792135587L, -4006140687792135586L), set(['zs_logging', 'OpsCenter'])) timed out after 3600 seconds. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: Task (<Node 10.1.0.22='6417880425364517165'>, (-4006140687792135587L, -4006140687792135586L), set(['zs_logging', 'OpsCenter'])) has failed 1 times. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: 101 errors have ocurred out of 100 allowed. 2014-06-03 22:16:44-0400 [zs_prod] ERROR: More than 100 errors during repair service, shutting down repair service 2014-06-03 22:16:44-0400 [zs_prod] INFO: Stopping repair service On the nodes on which the repair fails, from /var/log/cassandra/system.log: ERROR [RMI TCP Connection(93502)-10.1.0.22] 2014-06-03 20:12:28,858 StorageService.java (line 2560) Repair session failed: java.lang.IllegalArgumentException: Requested range intersects a local range but is not fully contained in one; this would lead to i mprecise repair at org.apache.cassandra.service.ActiveRepairService.getNeighbors(ActiveRepairService.java:164) at org.apache.cassandra.repair.RepairSession.<init>(RepairSession.java:128) at org.apache.cassandra.repair.RepairSession.<init>(RepairSession.java:117) at org.apache.cassandra.service.ActiveRepairService.submitRepairSession(ActiveRepairService.java:97) at org.apache.cassandra.service.StorageService.forceKeyspaceRepair(StorageService.java:2620) at org.apache.cassandra.service.StorageService$5.runMayThrow(StorageService.java:2556) at org.apache.cassandra.utils.WrappedRunnable.run(WrappedRunnable.java:28) These errors, which only occurs if the repair service is running, are the only errors these nodes experience. Outside of the repair task, the Cassandra cluster works perfectly. I am running Opscenter 4.1.2 with a 6 nodes DSE 4.0.2 cluster installed on linux virtual machines. The nodes run a vanilla installation of Ubuntu Server 12.04 64-bit and DSE was installed and secured according to the provided installation documentation. I have been experiencing that problem on my development cluster for a while too (with DSE 4.0.0, 4.0.1 and 4.0.2), but I thought this was because of some configuration error on my part. The problem has appeared spontaneously at some point too. The Cassandra cluster has been working very smoothly with a good write throughput. It is very stable and has enough resources to work with. We did not notice any problems with the applications that depend on it.

  Read the article

• Why is my server using so much memory?

  - by Qasim

  I haven't even set up my website on my dedicated server so I'm the only one using it at the moment. And yet this is what I see in my sys info: Full Size I just got a bunch of security softwares installed today so I'm wondering if that could be the reason. Programs like Dos deflate, CSF firewall, Mod_security, SIM, Log watch, etc. My server's details: CentOS Processor Intel Xeon CPU X3220 CPU Speed 2.39 GHz Cache Size 4.00 MB RAM 2GB DDR2

  Read the article

• MySQL server installation problems (windows)

  - by waitinforatrain

  Hi guys, I'm trying to install some CMS software (Wiccle). I was using XAMPP's MySQL but was getting a lot of errors (the same configuration works on another machine) so thought I'd install MySQL Community Edition to see if the proplem was related to the MySQL server. When I install and run the MySQL Community Edition service, however, it only works with my XAMPP password, and contains the same tables as the XAMPP install. Is there a common local database file where the database and login info is stored? Any help appreciated

  Read the article

• Trying to grok Linux quotas, where is the data stored?

  - by CarpeNoctem

  So all the tutorials and documentation for the Linux quota system has left me confused. For each filesystem with quotas enabled/on where is the actual quota information stored? Is it filesystem metadata or is it in a file? Say user foo creates a new file on /home. How does the kernel determine whether user foo is below their hard limit? Does the kernel have to tally up quota information on that filesystem each time or is it in the superblock or somewhere else? As far as I understand, the kernel consults the aquota.user file for the actual rules, but where is the current quota usage data stored? Can this be viewed with any tools outside repquota and the like? TIA!! Update: Thanks for the help. I had already read that mini-HOWTO. I am pretty clear on the usage of the user space tools. What I was unclear on is whether the usage data was ALSO in the file that stored per-user limits and you answered this with a yes. From what I can tell, rc.sysinit runs quotacheck and quotaon on startup. The quotacheck program analyzes the filesystem, updates the aquota.* files. It then makes use of quota.h and the quotactl() syscall to inform the kernel of quota info. From this point forward the kernel hashes that information and increments/decrements quota stats as changes occur. Upon shutdown, the init.d/halt script runs the quotaoff command RIGHT before the filesystems are unmounted. The quotaoff command does not appear to update the aquota.* files with the information the kernel has in memory. I say this because the {a,c,m}times for the aquota.user file are only updated upon a reboot of the system or by manual running the quotacheck command. It appears - as far as I can tell - that the kernel just drops it's up-to-date usage data on the floor at shutdown. This information is never used to update the aquota.* files. They are updated during startup by quotacheck(rc.sysinit). Seems silly to me since that updated info had already been collected by the kernel. So...in conclusion I am still not entirely clear on the methods. ;)

  Read the article

• Tools for Remote Desktop

  - by Stan

  Is there good tool that can do same thing as windows 'mstsc' and also has some features, like save different session info, so don't need to remember difference IP/ID/pwd. Thanks.

  Read the article

• How to have Vista OS send documents to printer without waiting in front?

  - by Greenleader

  Hi, I got a print server on our old printer. I have a problem, because Vista has its own queue. I want to bypass this queue and send everything straight away to printer so the print server deals with queue and not vista. Problem is, when second document is being printed from the same computer after first one. Vista is still waiting for info on finishing the first job even 5 minutes after it was REALLY finished.

  Read the article

• Tools for Remote Desktop Top

  - by Stan

  Is there good tool that can do same thing as windows 'mstsc' and also has some features, like save different session info, so don't need to remember difference IP/ID/pwd. Thanks.

  Read the article

• Does a high run queue length average result in poor performance for a web server?

  - by Domino

  I'm trying to narrow down the list of suspects of web servers that perform moderately well most of the time with occasional bouts of poor performance. I'm analyzing the data collected and summarized by sar. I've noticed a few things, one of which is high number of tasks in the run queue. 10:15:01 AM runq-sz plist-sz ldavg-1 ldavg-5 ldavg-15 blocked 10:25:01 AM 2 150 0.05 0.05 0.06 0 10:35:01 AM 4 149 0.08 0.12 0.09 0 10:45:01 AM 6 150 0.13 0.19 0.15 0 10:55:01 AM 1 150 0.08 0.10 0.13 0 11:05:01 AM 4 150 0.20 0.35 0.23 0 11:15:01 AM 3 149 0.02 0.09 0.15 0 11:25:01 AM 7 149 0.04 0.05 0.11 0 11:35:01 AM 4 150 0.14 0.15 0.13 0 11:45:01 AM 6 150 0.27 0.18 0.16 0 11:55:01 AM 5 150 0.08 0.10 0.13 0 12:05:01 PM 3 149 0.35 0.40 0.26 0 12:15:01 PM 19 155 0.02 0.10 0.16 1 12:25:01 PM 2 150 0.00 0.07 0.12 0 12:35:02 PM 3 151 0.58 0.24 0.17 0 12:45:01 PM 8 150 0.02 0.13 0.15 0 12:55:01 PM 6 149 0.81 0.29 0.18 0 01:05:01 PM 3 148 0.00 0.09 0.13 0 01:15:01 PM 7 149 0.00 0.04 0.11 0 I believe these are 10 minute averages. Is this an indicator that the web server is not performing as fast as it could if the average run queue length was lower?

  Read the article

• mysqldump is not dumping my data

  - by oompahloompah

  I am running mysqldump on Ubuntu Linux (10.0.4 LTS) my mySQL version info is: mysql Ver 14.14 Distrib 5.1.41, for debian-linux-gnu (i486) using readline 6.1 I used the following command: mysql -u username -p dbname dbname_backup.sql However when I opened the generated .sql file, I saw that most of the tables had only the schema dumped and in the few cases where the actual data was dumped, only 1 or two records were dumped (there are ATLEAST several tens of records in each table). Does anyone know what maybe going on?

  Read the article

• How much information can websites get about your browser/PC?

  - by Pickledegg

  I am trying to determine if the information shown on this website is the absolute maximum amount of information that a webserver can obtain from a web visitor. Does anyone know of any other sites that will be able to get more information from the user passively like this? I'm not talking about port-sniffing or any kind of interaction from the user, just the info that a server can get from a 'dumb' visit.

  Read the article

• Mod_security Logging

  - by Hekuran S. Doli

  Im trying to run mod_security as standalone service with nginx as reverse proxy everything works fine except logging. Mod_security logs reverse proxys ip addres instead of clients ip address. I would appreciate if someone can help. The following is an example of logfile where mod_security is logging 127.0.0.1 instead of clients ip address. 2012/08/29 14:18:13 [info] 206862#0: [client 127.0.0.1] ModSecurity: Access denied with code 403 (phase 2). Pattern match ...

  Read the article

• What are optimal strategies for using mapreduce and other applications on the same server?

  - by user45532

  I have two applications that I need to run continuously to process data. 1.) An app that processes and aggregates information from sources 2.) A mapreduce workflow* that processes the above info I've thought about either getting vps hosting or getting my own inexpensive server and using xen to split the resources of the server. Getting a quad core box with 2 GB of Ram seems a lot cheaper than the grid options I've seen at slicehost, rackspace and others...

  Read the article

• How to setup FTP Server on Linux

  - by Webnet

  I need to use FTP for a wordpress installation on a server and I'm not sure if it even has FTP on it. I'm trying to install themes and things where wordpress requires the FTP info. How can I set this up? There doesn't seem to be much on Google or I'm just not looking in the right place

  Read the article

• USB hard drive not recognized

  - by user318772

  Until recently I was using the portable USB hard drive in my win 7 laptop and ubuntu laptop. Suddenly now none of the laptops recognize it. This is the message i get by doing lsusb... Bus 001 Device 004: ID 1058:1010 Western Digital Technologies, Inc. Elements External HDD Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 003 Device 002: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub fdisk doesn't show the external hard drive Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004a743 Device Boot Start End Blocks Id System /dev/sda1 * 2048 152111103 76054528 83 Linux /dev/sda2 152113150 156301311 2094081 5 Extended /dev/sda5 152113152 156301311 2094080 82 Linux swap / Solaris when i do testdisk TestDisk 6.14, Data Recovery Utility, July 2013 Christophe GRENIER <[email protected]> http://www.cgsecurity.org TestDisk is free software, and comes with ABSOLUTELY NO WARRANTY. Select a media (use Arrow keys, then press Enter): >Disk /dev/sda - 80 GB / 74 GiB - ST980825AS Disk /dev/sdb - 2199 GB / 2048 GiB testdisk-> Intel->analyse I get partition error Disk /dev/sdb - 2199 GB / 2048 GiB - CHS 2097152 64 32 Current partition structure: Partition Start End Size in sectors Partition: Read error Here is the output of dmesg [11948.549171] Add. Sense: Invalid command operation code [11948.549177] sd 2:0:0:0: [sdb] CDB: [11948.549181] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.550489] sd 2:0:0:0: [sdb] Invalid command failure [11948.550495] sd 2:0:0:0: [sdb] [11948.550499] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.550505] sd 2:0:0:0: [sdb] [11948.550508] Sense Key : Illegal Request [current] [11948.550514] Info fld=0x0 [11948.550519] sd 2:0:0:0: [sdb] [11948.550525] Add. Sense: Invalid command operation code [11948.550531] sd 2:0:0:0: [sdb] CDB: [11948.550534] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 [11948.551870] sd 2:0:0:0: [sdb] Invalid command failure [11948.551876] sd 2:0:0:0: [sdb] [11948.551880] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [11948.551885] sd 2:0:0:0: [sdb] [11948.551888] Sense Key : Illegal Request [current] [11948.551895] Info fld=0x0 [11948.551900] sd 2:0:0:0: [sdb] [11948.551905] Add. Sense: Invalid command operation code [11948.551911] sd 2:0:0:0: [sdb] CDB: [11948.551914] Read(16): 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00 If possible i want to retrive at least some data from this hard drive. If thats not possible I would like to format it and use it. Any help will be greatly appreciated Thanks

  Read the article

• Hardware needed for receiving and recording videcalls in Asterisk

  - by jneves

  I'm planning an Asterisk configuration that should record videocalls and then feed it to an application. From what I've researched, it seems like app_h234m is the way to go (http://www.voip-info.org/wiki/view/Asterisk+app_h324m+compatibility). But it's not clear to me what are the hardware requirements for this. Can someone enlighten me?

  Read the article

• Installing mysql-server with python ssh connection

  - by mrbox

  I'm writing a script in Python, which is connecting to server via ssh, then installing some packages. But there is problem with dialogue box, where i can type in a root password- i don't know how to send data there. Once I tried to do this, my apt(using Debian Lenny) gone crazy. Here is some info: - Debian Lenny - Using PySSH with easier interface, code looks like this: clientSSH = SSHClient( self.ip, 'root', self.rootPassword, None ) clientSSH.login() clientSSH.run_command('apt-get install mysql-server mysql-client php5') clientSSH.run_command('Y') #I Don't know how send root passwd here clientSSH.logout()

  Read the article

• How to use rsync when filenames contain double quotes?

  - by wfoolhill

  I am trying to synchronize the content of the directory my_dir/ from /home to /backup. This directory contains a file which name has a double quote in it, such as to"to. Here is my rsync command: rsync -Cazh /home/my_dir/ /backup/my_dir/ And I get the following message: rsync: mkstemp "/backup/my_dir/.to"to.d93PZr" failed: Invalid argument (22) For info, rsync works well when the synchronized filenames contain single quote, parenthesis and space. Thus, why is it bugging with a double quote? Thanks for any help.

  Read the article

• Which mysql server package should I install?

  - by jim

  I just switched hosts and now have the task of reinstalling everything. I'm on CentOS now and I need to install mysql but have no idea which package to install. I can't seem to find any info on the differences either. Would anyone know? Yum is not an option as it wants to install 1.0.77 and this is too old. The machine is 64 bit.

  Read the article

• migrate old bootable wd harddrive to new 500 gb hd which was just used for storage and has stored programs on it , id like 500gb to be botable

  - by tom

  id appreciate any help in this matter this is in laptop with 2 harddrive bays. i have a wd scorpio that has become 2 small its bootable with windows 7, i have pretty new 3 months old hitachi hd500gb i was using for storage-backup of programs it is not bootable and id like to make it that way without losing saved backed up info on it is there any way to do this, id like to keep only 500gb bootable hard drive due to weight of laptop its 10.lbs desktop replacement gateway p-7805u thanks for your help in advance on this matter, tommy

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >