Search Results

Search found 15670 results on 627 pages for 'multi level'.

Page 157/627 | < Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >

• Unset the system immutable bit in Mac OS X

  - by skylarking

  In theory I believe you can unlock and remove the system immutable bit with: chflags noschg /Path/To/File But how can you do this when you've set the bit as root? I have a file that is locked, and even running this command as root will not work as the operation is not permitted. I tried logging in as Single-User mode to no avail. I seem to remember that even though you are in as root you are in at level '1'. And to be able to remove the system-immutable flag you need to be logged in at level '0'. Does this have something to do with this issue?

  Read the article

• How can I change my mysql user that has all privileges on a database to only have select privileges on one specific table?

  - by Glenn

  I gave my mysql user the "GRANT ALL PRIVILEGES ON database_name.* to my_user@localhost" treatment. Now I would like to be more granular, starting with lowering privileges on a specific table. I am hoping mysql has or can be set to follow a "least amount of privileges" policy, so I can keep the current setup and lower it for the one table. But I have not seen anything like this in the docs or online. Other than removing the DB level grant and re-granting on a table level, is there a way to get the same result by adding another rule?

  Read the article

• Can't access dfs namespace over vpn

  - by cpf

  Hi Serverfault, I've recently configured 2 servers in AD on the same domain level. They are physically separated and permanently connected through a site-to-site vpn for dfs replication. All well, but when users connect to either site through vpn (from home e.g.) they can't use the domain level method: \\domain.com\data Internally this works perfectly, resolving domain.com when connected through vpn gets the correct IP. I've tried Google to figure things out. What I was able to find was that more people have this issue, no real solution found though. Can anyone explain why this is happening? Especially a solution would be really helpful! Thanks in advance.

  Read the article

• Purpose of JBoss tables

  - by Rich

  Hi Can anyone point me in the direction of some documentation (or provide the information here) about the following tables, created by JBoss 5.1.0 when it starts up? I know what they are for at a high level, and know why they are there, but I could do with some lower-level documentation about each table's purpose. The tables are: hilosequences timers jbm_counter jbm_dual jbm_id_cache jbm_msg jbm_msg_ref jbm_postoffice jbm_role jbm_tx jbm_user I know that the first two are associated with uuid-key-generator and the EJB Timer Service respectively, while the rest are associated with JBoss Messaging. What I want to know is something along the lines of "jmg_msg stores each message when it is created...", that kind of thing. I wasn't sure where to ask this question, ServerFault or StackOverflow, but I decided it wasn't programming related so thought I should put it here - I hope that's ok! Thanks Rich

  Read the article

• Could a computer act (dependably) as a wireless router for 200+ clients? [closed]

  - by awkwardusername

  That is, I have a Core 2 Duo E7500 at 2.93GHz, with 2GB memory. I plan to install either Windows Server 2012 or Zeroshell 2.0RC1, and it also (planning to) includes two PCIe Wireless Card Adapters. It also has one ethernet port, and I will connect that to another machine which will be a Database and a Web Server. My plan is to have a corporate level wireless intranet with 200+ clients. I cannot afford to buy routers because I want to operate at zero costs as possible, utilizing my available resources. Is that plan plausible? Also, what minimum specs should my wireless card have? @SvenW: Oh, I meant corporate on the deployment level. I am still an undergraduate and this is more of an educational and expiremental work than an actual project. I got Windows Server 2012 for free though, and this isn't actually for commercial use.

  Read the article

• Setting up Kerberos SSO in Windows 2008 network

  - by Arturs Licis

  We recently introduced Kerberos (SPNEGO) Single Sign-on in our web-portal, and tested it on a Windows network with Windows 2003 domain controller. Now, trying to test it on Windows 2008 R2 controlled network, SSO just doesn't work due to defective tokens. Up to the moment I was pretty sure that there's something wrong about environment and that were NTLM tokens. We double checked IE settings etc, but nothing helped. Then we checked the following settings for both users (logged on a client test-machine, and the one used as a Service Principal): This account supports Kerberos AES 128 bit encryption. This account supports Kerberos AES 256 bit encryption. .. and error message changed to ' GSSException: Failure unspecified at GSS-API level (Mechanism level: Encryption type AES256CTS mode with HMAC SHA1-96 is not supported/enabled) It makes me think that Internet Explorer receives Kerberos tokens at all times, and there's just some configuration missing, or it was ktpass.exe to be incorrectly executed. Here's how ktpass.exe was invoked: C:ktpass /out portal1.keytab /mapuser USER /princ HTTP/[email protected] /pass *

  Read the article

• Full Access user removed from NTFS Share

  - by TJ

  I don't know how it happened but for some reason one of the sub folders in the Network shares (call the share Market and the sub folder Support) no longer has any groups or users with full permissions on the share. The Market top level has users and groups with these permissions and everything is set up for folder inheritance but it's not inheriting permissions from the top level and only has modify permissions for the single group that is in the Access List for the sub folder Support. I can see items in the sub folder but I can not add, edit, or delete permissions to the Support folder. What are my options so I can once again manage permissions?

  Read the article

• Add Bookmark to IE automatically for new users on a computer

  - by Kyle Brandt

  When I set up a PC, I would like to be able to have it so when anyone logs into that PC from the domain a couple of IT bookmarks will be in IE. I read I can do this with a Domain-Level group policy, but unfortunately, with my current domain group policies have not gone well, so I have fear (Rather not get into this in this question). Can I do this at the PC level when I deploy a new computer? So any domain users who log into the PC will have these bookmarks added when their profile is created (no roaming profiles). These are XP machines, and the domain is run by 2003 controllers.

  Read the article

• Zensyslog Clear Events

  - by Stefan Mai

  I've hooked up Zenoss' Zensyslog so that messages from a distributed list of client machines are all conglomerated into events on the Zenoss server. This is all fantastic, and I can bump messages by simply using the logger command: logger -t webserver_is_down "The web server is down" What I'd like to be able to do is also post an event that clears for when the webserver comes up. logger -t webserver_is_up "The web server is up" I've tried to set this up with Event classes but with no dice. Is there a Syslog level that correlates with Zenoss' clear/0 level? Is there another easy way to do this? Thanks for any help you can give!

  Read the article

• Routing and Remote Access Service won't start after full disk

  - by NKCSS

  The HDD of the server was out of disk space, and after a reboot, RRAS won't start anymore on my 2008 R2 server. Error Details: Log Name: System Source: RemoteAccess Date: 2/5/2012 9:39:52 PM Event ID: 20153 Task Category: None Level: Error Keywords: Classic User: N/A Computer: Windows14111.<snip> Description: The currently configured accounting provider failed to load and initialize successfully. The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="RemoteAccess" /> <EventID Qualifiers="0">20153</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-02-05T20:39:52.000Z" /> <EventRecordID>12148869</EventRecordID> <Channel>System</Channel> <Computer>Windows14111.<snip></Computer> <Security /> </System> <EventData> <Data>The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile. Please contact the Administrator of the RAS server and notify them of this error.</Data> <Binary>2C030000</Binary> </EventData> </Event> I think it has something to do with a corrupt config file, but I am unsure of what to do. I Removed the RRAS role, rebooted, and re-added, but it keeps failing with the same error. Thanks in advance. [UPDATE] If i set the accounting provider from 'Windows' to '' the service starts but VPN won't work. Any ideas how this can be repaired?

  Read the article

• SQL Server database filled the hard drive and freeing up space isn't possible

  - by Jon

  I have a database in SQL Server 2008 on a 1Tb hard drive and it filled the drive, there is only 4Kb free. The MDF file is 323Gb and the LDF is 653Gb. The hard disk this DB is on has no other files on it other than the MDF and LDF so it's impossible to free up any space on the drive. The main hard disk is smaller but there is enough room to transfer the MDF to that drive, in case that helps. This server is overseas at a customer site and it's not possible at the moment to add more disk space to the server. It's also not possible to delete any records because the DB is in a failed mode (due to no disk space) and it doesn't respond to most commands. The Db is currently in full recovery mode which is why the LDF file is so large. This DB really doesn't need to be in full recovery so going forward we plan on switching it to simple mode which will save us a lot of space. I also don't care about losing the LDF file, but I need all of the data. I've spent a lot of time looking for a way out of this problem but everything I've found first involves either freeing up disk space or adding more disk space, neither of which is an option at this time. I'm stuck and any help would be greatly appreciated. I get the following log when trying to switch the DB to online mode. Msg 945, Level 14, State 2, Line 3 Database 'DBNAME' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Msg 5069, Level 16, State 1, Line 3 ALTER DATABASE statement failed. Msg 1101, Level 17, State 12, Line 3 Could not allocate a new page for database 'DBNAME' because of insufficient disk space in filegroup 'DEFAULT'. Create the necessary space by dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup. I've found the following solutions but none work due to having no disk space on that drive, and since the DB is in a failed state I can't run most commmands. - DBCC SHRINKFILE - can't be run because doing a 'use DBNAME' fails - Detaching the DB and then changing the location of the MDF/LDF files, this fails because the DB is in an offline mode so you can't run detach. I'm at a loss about what else to try. Thanks.

  Read the article

• How do I tell mdadm to start using a missing disk in my RAID5 array again?

  - by Jon Cage

  I have a 3-disk RAID array running in my Ubuntu server. This has been running flawlessly for over a year but I was recently forced to strip, move and rebuild the machine. When I had it all back together and ran up Ubuntu, I had some problems with disks not being detected. A couple of reboots later and I'd solved that issue. The problem now is that the 3-disk array is showing up as degraded every time I boot up. For some reason it seems that Ubuntu has made a new array and added the missing disk to it. I've tried stopping the new 1-disk array and adding the missing disk, but I'm struggling. On startup I get this: root@uberserver:~# cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md_d1 : inactive sdf1[2](S) 1953511936 blocks md0 : active raid5 sdg1[2] sdc1[3] sdb1[1] sdh1[0] 2930279808 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] I have two RAID arrays and the one that normally pops up as md1 isn't appearing. I read somewhere that calling mdadm --assemble --scan would re-assemble the missing array so I've tried first stopping the existing array that ubuntu started: root@uberserver:~# mdadm --stop /dev/md_d1 mdadm: stopped /dev/md_d1 ...and then tried to tell ubuntu to pick the disks up again: root@uberserver:~# mdadm --assemble --scan mdadm: /dev/md/1 has been started with 2 drives (out of 3). So that's started md1 again but it's not picking up the disk from md_d1: root@uberserver:~# cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md1 : active raid5 sde1[1] sdf1[2] 3907023872 blocks level 5, 64k chunk, algorithm 2 [3/2] [_UU] md_d1 : inactive sdd1[0](S) 1953511936 blocks md0 : active raid5 sdg1[2] sdc1[3] sdb1[1] sdh1[0] 2930279808 blocks level 5, 64k chunk, algorithm 2 [4/4] [UUUU] What's going wrong here? Why is Ubuntu trying to pick up sdd into a different array? How do I get that missing disk back home again? [Edit] - After adding the md1 to mdadm.conf it now tries to mount the array on startup but it's still missing the disk. If I tell it to try and assemble automatically I get the impression it know it needs sdd but can't use it: root@uberserver:~# mdadm --assemble --scan /dev/md1: File exists mdadm: /dev/md/1 already active, cannot restart it! mdadm: /dev/md/1 needed for /dev/sdd1... What am I missing?

  Read the article

• Xen P2V for large physical hosts with much free space

  - by Sirex

  I need to P2V a rhel5 machine to xen under rhel5. I know I can use dd if=/dev/sda then using virt-install --import on the host, but the downside of this is the original machine has 80% free space on its drive. Does anyone know of (or can document) a quick and easy method which works reliably, to produce a bootable xen image which can run under a hvm in such cases ? I tried clonezilla to make the image, to avoid the free space problem, but it failed to do the clone with "something went wrong" (useless info, i know). At the moment im looking at doing a dd of each partition, and a file level copy of the partition which is mostly empty, then creating a new virtual disk, copying the partitions over to it by mounting both the new image and the virtual drive on a second vm, then copying the boot sectors over, then copying the file level backup..... there must be an easier way ? Oh, and budget is $0. :)

  Read the article

• Testing DNS configuration of domain by using hosts file?

  - by Alex Blundell

  I'm currently migrating a website to another server, and want to test the DNS configuration (more specifically, email mx records) before moving the domain over. I've configured the DNS on the new server to have mx entries for Google Apps in the same way that it's configured on the old server. The domain is controlled by nameservers on the old server at the moment, so the change would simply be updating the nameservers to the new servers. (What I'm getting at is DNS is controlled at the server level, not registrar level). Since the website has quite a number of users, I want to make sure the configuration is right before flicking the switch. For this, can I add an entry to the hosts file of my local computer to point the domain to the new server? I've done this, and the web server works, but would this also test the email mx records on the new server?

  Read the article

• Why does Snow Leopard report incorrect battery levels for Bluetooth input devices after switching them to Apple rechargeable batteries?

  - by GeneQ

  I have a Magic Trackpad, Magic Mouse and the Apple Wireless keyboard. They work fine. Two days ago, doing my part for the environment, I changed all their batteries to Apple rechargeable batteries. Today I noticed that the battery level meter for all three devices report the wrong battery level. The trackpad reports 93% charge, the keyboard 75% charge and the mouse 65% charge. This can't be right; these are fully charged new batteries. They can't possible drop that much within 48 hours. Has anyone else encountered this problem? And are there any solutions?

  Read the article

• rsyslog forward all except ldap

  - by Brian

  I have Centos 6 servers running openLDAP. In the rsyslog.conf, I forward the logs to my central server with this line: *.* @10.10.10.10:514 openldap seems incredibly chatty. I have 3 servers in a multi-master cluster. Those 3 servers generate twice as many logs as my other 80 servers combined. I have been unsuccessful in figuring out how to tell openLDAP to use a sensible log level. (we never specifically set the log level) Since these are my main authentication sources, I'm a bit hesitant to "play around" with them. Is there a way to tell rsyslog to forward everything EXCEPT LOCAL4?

  Read the article

• Use ImageMagick to convert TIFF to PNGs, how to improve the speed?

  - by Woo

  I am using "convert" from IM to get PNGs from multi-page TIFF files, everything is good except the speed. From "convert" documentation, I found: For the MNG and PNG image formats, the quality value sets the zlib compression level (quality / 10) and filter-type (quality % 10). For compression level 0, the Huffman-only strategy is used, which is fastest but not necessarily the worst compression. The default PNG compression is 75. So I tried "-quality 0", but almost no changes with the spreed. Anyone can share the ideas of how to improve the spreed? Here are my command: convert 100Pages.tif[0,1,2,3,4,5] -quality 0 100Pages.png Thanks!

  Read the article

• Is it inefficient to have symbolic links to symbolic links?

  - by Ogre Psalm33

  We're setting up a series of Makefiles where we want to have a project-level include directory that will have symbolic links to sub-project-level include files. Many sub-project developers have chosen to have their include files also be symbolic links to yet another directory where the actual software is located. So my question is, is it inefficient to have a symbolic link to a symbolic link to another file (for, say, a C++ header that may be included dozens or more times during a compile)? Example directory tree: /project/include/ x_header1.h -> /project/src/csci_x/include/header1.h x_header2.h -> /project/src/csci_x/include/header2.h /project/src/csci_x/ include/ header1.h -> /project/src/csci_x/local_1/cxx/header1.h header2.h -> /project/src/csci_x/local_2/cxx/header2.h local_1/cxx/ module1.cpp header1.h local_2/cxx/ module2.cpp header2.h

  Read the article

• Raid 5 with 4 disks on Debian automatically creates a spare drive

  - by Razer

  I'm trying to to create a RAID 5 with 4x 2TB disks on Debian 6. I followed the instructions from: http://zackreed.me/articles/38-software-raid-5-in-debian-with-mdadm I created the raid with following command: sudo mdadm --create --verbose /dev/md0 --auto=yes --level=5 --raid-devices=4 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 After creating the RAID mdadm --detail /dev/md0 shows me: /dev/md0: Version : 1.2 Creation Time : Mon Jun 11 18:14:26 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 11 18:14:26 2012 State : clean, degraded Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : rsserver:0 (local to host rsserver) UUID : a68c3c99:1ef865e9:5a8a7bdc:64710ed8 Events : 0 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 8 33 1 active sync /dev/sdc1 2 8 49 2 active sync /dev/sdd1 3 0 0 3 removed 4 8 65 - spare /dev/sde1 Why is there a spare drive? I didn't create one. I don't want to use a spare drive.

  Read the article

• Catch headset pause/play keypresses in Windows

  - by akshay2000

  I have a new Ultrabook which has single audio jack for input and output instead for separate 3.5 mm jacks we used to have on older machines. The jack is probably similar to American Audio Jack specification or like the one found on Macbook Pro. I have tried to use it with the Apple, HTC, Nokia earphones which ship with most of the smartphones. Microphone on the headset works the way it should. Thing is that the headsets also come with remote controls to control volume and playback. I am sure that those key presses are sent to the Windows. I was hoping to catch those events and bind those to actual media keys so that I can control music playback. I guess this happens on Macs. I want to do the similar thing on the Windows. I'm just not sure where I can catch the events. Driver level? Application level?

  Read the article

• How to know my wireless card has injection enabled?

  - by shrimpy

  I am playing around with aircrack. And was trying to see whether my wireless card on my laptop can pass the injection test And I end up seeing the following... does it mean my wireless card is not able to run aircrack? root@myubuntu:/home/myubuntu# iwconfig lo no wireless extensions. eth0 no wireless extensions. eth1 IEEE 802.11bg ESSID:"" Nickname:"" Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated Bit Rate:54 Mb/s Tx-Power:24 dBm Retry min limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=5/5 Signal level=0 dBm Noise level=-57 dBm Rx invalid nwid:0 Rx invalid crypt:781 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 root@myubuntu:/home/myubuntu# aireplay-ng -9 eth1 ioctl(SIOCSIWMODE) failed: Invalid argument ARP linktype is set to 1 (Ethernet) - expected ARPHRD_IEEE80211, ARPHRD_IEEE80211_FULL or ARPHRD_IEEE80211_PRISM instead. Make sure RFMON is enabled: run 'airmon-ng start eth1 <#>' Sysfs injection support was not found either. root@myubuntu:/home/myubuntu#

  Read the article

• What is the fastest RAID in practise?

  - by Luke

  I'm going to be rebuilding my server, and I want much faster access to my data. I've used RAID 1 and 0 in the past, and decided upon RAID 10 (dedicated RAID card). Then someone told me to use RAID 5+0, then someone else told me to use RAID 6+0. Assuming the Hardware RAID Card supports each level, what is currently the FASTEST RAID available, given x number of hard drives? Reliability is now another factor, and I am willing to spend money on new drives if a drive (or multiple) fail. I simply want to know what the fastest RAID level is, along with some reliability for recovering from a failure

  Read the article

• How do I set up a desktop shortcut to a batch file which will run as administrator

  - by justinhj

  I want the batch file to run and launch some programs, all of which need to be at administrator level.

  Read the article

• Home Directory Folders

  - by George

  I am looking for a way to acomplish the following: Currently users have home drives mapped via AD profile as follow: \\fileserver\users\username However if once a user was able to access \\fileserver\users and view everyones folder, but had no access to them. This is not ideal since we have people saving important stuff to on their drives. How can I restrict users permissions and views only to THEIR home drives? I also saw this solution, but not sure if it would apply to me: ================================================================================ Share level permissions - Everyone full permission and remove all others On the file/folder level set the following: Authenticated users special permissions on the root of the \\server\homeshare\ to Check the boxes next to the following: Traverse folder / execute file List Folder / read data Read attributes Read extended attributes / List item All other boxed leave unchecked and make sure you apply "This Folder Only" Domain Adminsfull rights and apply “this folder, subfolders, and files” This will block the users from accessing other user home directories. When you create the new user and set the home directory it will create the folder for you with the correct permissions.

  Read the article

• How do I add an Approver to SharePoint 2010?

  - by CompGeekess

  I am still new to SharePoint and am learning so much, but have came in to a few hic-ups and here is one. I want to add an approver to SharePoint 2010 who has FULL CONTROL. My manager requested that I find out where the approval request are going and redirect them to him. (I have no idea where or how to find this out). Is this possible to do on the Central Administration or must I go into each site/subsite and set him to be the approver this way? Googled and the site was showing me how to approve workflows or how to create approvals, my other resources didn't give much help either. So far I had gone into a few individual sites and set my manager and I up as approvers with full control, but am uncertain if this is the correct procedure or if there is a better way to do this. For example, have the lower levels inherit from the higher level - set security at the highest level and cascade to the child levels. Thank You.

  Read the article

< Previous Page | 153 154 155 156 157 158 159 160 161 162 163 164  | Next Page >