Search Results

Search found 84 results on 4 pages for 'tj'.

Page 1/4 | 1 2 3 4 | Next Page >

Disabling Laptop (PB TJ-75) faulty card reader Linux

- by Gab

My problem comes from that my laptop [PB TJ-75] has a faulty Alcor card reader. It’s 100% sure, the device is dead and unusable whatever the OS is. It cannot be disabled in BIOS [latest: Vendor: Phoenix Technologies LTD Version: V1.26 Release Date: 05/04/2010]. If I could take it apart from the main board easily, and if with that, the system would never look again for it, I’ll be very happy! Is it possible, has anyone ever tried this? Or maybe, replacing the BIOS with a more open one, which let you disable the card reader. Does this exists? Here's what I've tried to disable it so far. In Win7, I choose ‘disable’ in device manager and that’s ok. If not, the device keeps on appearing and disappearing and lot of resources are used. In Lubuntu 13.04, I got extra boot time, with the msg:'sdb, assuming drive cache, etc.’ I tried other distros (isos booted by grub). I can boot Puppy, Gparted, and Redobackup apparently without any problem. I cannot boot Debian, live or install + tried Crunchbang and Tails. I got a loop :’usb device, scsi n+1 blabla‘. I tried "nousb", no result, I have blacklisted EHCI, no result, then usb_storage module, better boot time in Lubuntu, with just the message "...data transfer failed", better shutdown time too. But, no way to use usb storage medias. In Debian, it ends with BusyBox prompt. Is it possible to just disable that Alcor card reader? Does it have a specific module? Is there a special kernel boot option that I missed? Does it have something to do with kernel recompiling, and if yes, how to do with isos? Programming a driver which says everything is ok (out of my comprehension for the moment)? Disabling device by vendor id? What is the best way?

Read the article
In listview,Viewstub cannot be found after the previous one is inflate

- by user2958132

I am using some list item layout and in the item layout, there is a Viewstub where I want to put some image in.I don't have the source of list item layout and just know there are some TextViews and ViewStubs in it. My purpose is to find the ViewStub first and set my personal layout and play with it. However, some of the ViewStub cannot be found. public class TJAdapter extends CursorAdapter { .... public void bindView(View view, Context context, Cursor cursor) { ViewStub contentstub = (ViewStub)item.findViewById(R.id.content_stub); if (contentstub == null){ LOG.error("TJ,contentstub is null"); } else { LOG.error("TJ,contentstub is not null"); contentstub.setLayoutResource(R.layout.icon_image); View iconImage = contentstub.inflate(); } .... } public View newView(Context context, Cursor cursor, ViewGroup parent) { final View view = mInflater.inflate(R.layout.list_item, parent, false); bindView(view, context, cursor); } And the log output is like this: TJ,bindView is called TJ,contentstub is not null TJ,bindView is called TJ,contentstub is null TJ,bindView is called TJ,contentstub is not null TJ,bindView is called TJ,contentstub is not null TJ,bindView is called TJ,contentstub is null TJ,bindView is called TJ,contentstub is not null I spent a lot of time on it and have no idea why this happens. Can some body help?

Read the article
Some optimization about the code (computing ranks of a vector)?

- by user1748356

The following code is a function (performance-critical) to compute tied ranks of a vector: mergeSort(x,inds,ci); //a sort function to sort vector x of length ci, also returns keys (inds) of x. int tj=0; double xi=x[0]; for (int j = 1; j < ci; ++j) { if (x[j] > xi) { double rankvalue = 0.5 * (j - 1 + tj); for (int k = tj; k < j; ++k) { ranks[inds[k]]=rankvalue; }; tj = j; xi = x[j]; }; }; double rankvalue = 0.5 * (ci - 1 + tj); for (int k = tj; k < ci; ++k) { ranks[inds[k]]=rankvalue; }; The problem is, the supposed performance bottleneck mergeSort(), which is O(NlogN) is several times faster than the other part of codes (which is O(N)), which suggests there is room for huge improvment with the other part of the codes, any advices?

Read the article
9o9 98 6y jetj ety jetjte j [closed]

- by mandnd

8oo o o9o tj jy jey

Read the article
How to keep menu in a single place without using frames

- by TJ Ellis

This is probably a duplicate, but I can't find the answer anywhere (maybe I'm searching for the wrong thing?) and so I'm going to go ahead and ask. What is the accepted standard practice for creating a menu that is stored in a single file, but is included on every page across a site? Back in the day, one used frames, but this seems to be taboo now. I can get things layed out just the way I want, but copy/pasting across every page is a pain. I have seen php-based solutions, but my cheap-o free hosting doesn't support php (which is admittedly a pain, but it's a fairly simple webpage...). Any ideas for doing this that does not require server-side scripting?

Read the article
Moodle 2 pages loading up to 2000% faster

- by TJ

On average our Moodle 2 pages were loading in 2.8 seconds, now they load in as little as 0.12 seconds, so that’s like 2333.333% faster!What was it I hear you say?Well it was the database connection, or more correctly the database library. I was using FreeTDS http://docs.moodle.org/22/en/Installing_MSSQL_for_PHP, but now I’m using the new Microsoft Drivers 3.0 for PHP for SQL Server http://www.microsoft.com/en-us/download/details.aspx?id=20098. I’m in a Windows Server IT department, and in both our live and development environments, we have Moodle 2.2.3, IIS 7.5, and PHP 5.3.10 running on two Windows Server 2008 R2 servers and using MS Network Load Balancing.Since moving to Moodle 2, the pages have always loaded much more slowly than they did in Moodle 1.9, I’ve been chasing this issue for quite a while. I had previously tried the Microsoft Drivers for PHP for SQL Server 2.0, but my testing showed it was slower than the FreeTDS driver.Then yesterday I found Microsoft had released the new version, Microsoft Drivers 3.0 for PHP for SQL Server, so I thought I’d give it a run, and wow what a difference it made.Pages that were loading in 2.8 seconds, now they load in as little as 0.12 seconds, 2333.333% faster…I have more testing to do, but so far it’s looking good, I have scheduled multi user load testing for early next week (fingers crossed).To make the change all I need to do was,download the driverscopy the relevant files to PHP\ext (for us they were php_pdo_sqlsrv_53_nts.dll and php_sqlsrv_53_nts.dll) install the Microsoft SQL Server 2012 Native Client x64 http://www.microsoft.com/en-us/download/details.aspx?id=29065 add to PHP.ini, extension=php_pdo_sqlsrv_53_nts.dll, extension=php_sqlsrv_53_nts.dllremove form PHP.ini, extension=php_dblib.dllvchange in PHP.ini, mssql.textlimit = 20971520 and mssql.textsize = 20971520change Moodle config.php, $CFG->dbtype = 'sqlsrv'; and 'dbpersist' => Trueand then reboot and test…I've browsed courses, backed up/restored some really large and complicated courses, deleted courses etc. etc. all good.Still more testing to do but, hey this is good start...Hope this helps anyone experiencing the same slowness…

Read the article
How to I access "Deny" message from a Lidgren client?

- by TJ Mott

I'm using the Lidgren v3 network for a UDP client/server networking model. On the server end, I'm initializing a NetServer object with the NetIncomingMessage.ConnectionApproval message type enabled. So the client is able to successfully connect and the first packet it sends is a login packet, containing a username and password supplied by the user. The server is receiving that and doing some black magic to authenticate, and everything works up to that point. If the login fails, the server calling NetIncomingMessage.SenderConnection.Deny("Invalid Login Credentials"). I want to know how to properly receive this deny message on the client. I'm getting the message, it shows up with a message type of NetIncomingMessage.StatusChanged. If I call ReadString on that message, I get a corrupted version of the string I passed to the Deny method on the server. The type of corruption varies, I've seen odd characters in there but in every case it's truncated and is way shorter than the string I entered. Any ideas? The official documentation is sparse on this topic. I could use pointers from anyone who has successfully used the Lidgren library and uses the Accept or Deny methods. Also, if I don't do any authentication and just Approve() the connection every time, stuff actually works just fine and I'm getting reliable two-way UDP traffic. (And lastly, Stack Exchange said I don't have enough reputation to use the "Lidgren" tag....???)

Read the article
MVC & Windows Authentication

- by TJ

Changed the ValidateUser function public bool ValidateUser(string userName, string password) { bool validation; try { LdapConnection ldc = new LdapConnection(new LdapDirectoryIdentifier((string)null, false, false)); NetworkCredential nc = new NetworkCredential(userName, password, "domainname.com"); ldc.Credential = nc; ldc.AuthType = AuthType.Negotiate; ldc.Bind(nc); // user has authenticated at this point, as the credentials were used to login to the dc. string myvar = ldc.SessionOptions.DomainName; validation = true; } catch (LdapException) { validation = false; } return validation; }

Read the article
Using JQuery to open a popup window and print

- by TJ Kirchner

Hello, A while back I created a lightbox plugin using jQuery that would load a url specified in a link into a lightbox. The code is really simple: $('.readmore').each(function(i){ $(this).popup(); }); and the link would look like this: <a class='readmore' href='view-details.php?Id=11'>TJ Kirchner</a> The plugin could also accept arguments for width, height, a different url, and more data to pass through. The problem I'm facing right now is printing the lightbox. I set it up so that the lightbox has a print button at the top of the box. That link would open up a new window and print that window. This is all being controlled by the lightbox plugin. Here's what that code looks like: $('.printBtn').bind('click',function() { var url = options.url + ( ( options.url.indexOf('?') < 0 && options.data != "" ) ? '?' : '&' ) + options.data; var thePopup = window.open( url, "Member Listing", "menubar=0,location=0,height=700,width=700" ); thePopup.print(); }); The problem is the script doesn't seem to be waiting until the window loads. It wants to print the moment the window appears. As a result, if I click "cancel" to the print dialog box, it'll popup again and again until the window loads. The first time I tried printing I got a blank page. That might be because the window didn't finish load. I need to find a way to alter the previous code block to wait until the window loads and then print. I feel like there should be an easy way to do this, but I haven't found it yet. Either that, or I need to find a better way to open a popup window and print from the lightbox script in the parent window, without alternating the webpage code in the popup window.

Read the article
Increase RGB components every Hour (r), Minute (g), Second (b) for digital clock

- by TJ Fertterer

So I am taking my first javascript class (total noob) and one of the assignments is to modify a digital clock by assigning the color red to hours, green minutes, blue to seconds, then increase the respective color component when it changes. I have successfully assigned a decimal color value (ex. "#850000" to each element (hours, minutes, seconds), but my brain is fried trying to figure out how to increase the brightness when hours, minutes, seconds change, i.e. red goes up to "#870000" changing from 1:00:00 pm to 2:00:00 pm. I've searched everywhere with no help on how to successfully do this. Here is what I have so far and any help on this would be greatly appreciated. TJ <script type="text/javascript">  </script> </head> <body onload="updateClock(); setInterval( 'updateClock()', 1000 )"> <h1 align="center">The JavaScript digital clock</h1> <h2 align="center">Thomas Fertterer - Lab 2</h2> <div id='clock' style="text-align: center"> <span id="hours"></span>: <span id='minutes'></span>: <span id='seconds'></span> <span id='am_pm'></span> </div> </body> </html>

Read the article
32-bit Ubuntu or 64-bit w/Intel Atom D510 w/4GB RAM?

- by T.J. Crowder

(I've seen this question and some related ones, and perhaps this is a duplicate although part of my question is specific to the Atom D510.) I'm going to be installing Ubuntu on a new silent desktop as my latest (and hopefully last) attempt to switch from Windows to Linux for at least most everyday tasks. The new machine is entirely passvely cooled, but as a consequence, not astonishingly powerful — an Atom D510 (dual-core, 1.6GHz, HT) on Intel's D510MO board. That's fine, I won't use it for gaming, (much) video editing, etc. It's a 64-bit processor and I'm maxing the board out at 4GB of RAM (hey, that 1.6 CPU needs all the help it can get), which naturally raises the question of whether to install Ubuntu 64-bit or 32-bit (and if the latter, either live with the missing RAM, or do the PAE kernel dance). Although I've used Linux on servers for years, I'm very nearly a Linux desktop newbie and am not currently in the mood to fight driver wars and such. So if I'm setting myself up for failure with 64-bit, I'll live with the missing ~0.8GB or fiddle with PAE. But if 64-bit is entirely "ready," great, I'm there. So: Do most mainstream apps (now) play nicely with 64-bit Linux? I can't help but notice the "AMD" in the ISO image filename ubuntu-10.04-desktop-amd64.iso and I know AMD lead the way on this stuff — does Ubuntu 64-bit play nicely with Intel processors? Just generally, would you recommend one or the other? (And if anyone has any experience with Ubuntu specifically on the D510 [32-bit or 64-bit] which might lead me one way or t'other, that would be useful.) Thanks in advance.

Read the article
QoS for Cisco Router to Prioritize Voice and Interactive Traffic

- by TJ Huffington

I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

Read the article
QoS for Cisco Router to Prioritize Voice and Interactive Traffic

- by TJ Huffington

I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

Read the article
How easy is it to migrate a Linux VM image from one VM env to another?

- by T.J. Crowder

If I stick to one of the standard, well-supported VM disk images (like a raw image, or VDI, VMDK, ...), are Linux VMs typically easy to move between VM environments? E.g., between (say) VirtualBox and KVM, or VMWare and Xen? I'm talking here of fully virtualized environments, not paravirtualization requiring support within the guest OS. It seems to me that the kernels in most Linux distributions these days are configured to...keep an open mind and detect things at boot time, so you don't have the issue that you sometimes have moving a Windows VM from one virtualization system to another (I'm thinking particularly of HAL issues that Windows has, like ACPI vs. non-ACPI; I've also just had Windows VMs generally acting strangely when moved from VMWare to VirtualBox, for instance). I'm looking for a general answer, but if it helps, specifically I'm mostly going to be doing this with Ubuntu 8.04 LTS and 10.04 LTS guests. But that could change.

Read the article
Remote NX login to Ubuntu, Gnome can't mount CD/DVD drive

- by T.J. Crowder

Even though I'm sitting next to it, I log into my Ubuntu 10.04 LTS system via NX Free Edition from another system at the moment (this is temporary, not worth buying a KVM for). Curiously, though, when I do that Gnome's auto-mounting fails for CD/DVD media (I haven't tried other kinds) with a "Not Authorized" error. For instance here's what happens when I put the Ubuntu 10.04 LTS installation CD in: This does not happen if I log into it locally (not via NX) with the same user account. When using NX, I can mount the media if I go to mount directly: tjc@midnight:~$ sudo mkdir /media/dvd tjc@midnight:~$ sudo mount -r -t iso9660 /dev/sr0 /media/dvd tjc@midnight:~$ ls /media/dvd autorun.inf casper dists install isolinux md5sum.txt pics pool preseed README.diskdefines ubuntu wubi.exe ...which, along with the "not authorized" error, suggests some kind of permissions problem to me (doh). What I find odd is that the same user is involved in both cases (local and via NX). I'm new to Ubuntu on the desktop (used it and other distros on servers for years), so I'm afraid I don't know how this auto-mounting is happening. I think it's handled by the gvfs package and its daemon, but that's about as far as I got (and perhaps I've taken a left turn even getting that far). Although I can work around it with mount, does anyone know how I might get auto-mounting to work?

Read the article
Intel D510MO board - 1000Mbit LAN or not?

- by T.J. Crowder

The Intel forum seems to be down (signing in fails with connection refused), but perhaps someone here knows the answer. The Intel D510MO product page says that the LAN is 10/100/1000, but when I look at the NM10 chipset it uses, it says it's just 10/100 (and the detailed PDF spec here backs that up pretty definitively). I don't immediately see anything saying the D510MO has a different LAN controller than the NM10's onboard one, and it would seem odd if it did given the purpose of the board (low power, small footprint; integrated). Does this board support 1000Mbit LAN or not? Anyone have direct knowledge of it? Thanks in advance.

Read the article
How to get rid of a stubborn 'removed' device in mdadm

- by T.J. Crowder

One of my server's drives failed and so I removed the failed drive from all three relevant arrays, had the drive swapped out, and then added the new drive to the arrays. Two of the arrays worked perfectly. The third added the drive back as a spare, and there's an odd "removed" entry in the mdadm details. I tried both mdadm /dev/md2 --remove failed and mdadm /dev/md2 --remove detached as suggested here and here, neither of which complained, but neither of which had any effect, either. Does anyone know how I can get rid of that entry and get the drive added back properly? (Ideally without resyncing a third time, I've already had to do it twice and it takes hours. But if that's what it takes, that's what it takes.) The new drive is /dev/sda, the relevant partition is /dev/sda3. Here's the detail on the array: # mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Oct 26 12:27:49 2011 Raid Level : raid1 Array Size : 729952192 (696.14 GiB 747.47 GB) Used Dev Size : 729952192 (696.14 GiB 747.47 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 12 17:48:53 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : 2fdbf68c:d572d905:776c2c25:004bd7b2 (local to host blah) Events : 0.34665 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - spare /dev/sda3 If it's relevant, it's a 64-bit server. It normally runs Ubuntu, but right now I'm in the data centre's "rescue" OS, which is Debian 7 (wheezy). The "removed" entry was there the last time I was in Ubuntu (it won't, currently, boot from the disk), so I don't think that's not some Ubuntu/Debian conflict (and they are, of course, closely related). Update: Having done extensive tests with test devices on a local machine, I'm just plain getting anomalous behavior from mdadm with this array. For instance, with /dev/sda3 removed from the array again, I did this: mdadm /dev/md2 --grow --force --raid-devices=1 And that got rid of the "removed" device, leaving me just with /dev/sdb3. Then I nuked /dev/sda3 (wrote a file system to it, so it didn't have the raid fs anymore), then: mdadm /dev/md2 --grow --raid-devices=2 ...which gave me an array with /dev/sdb3 in slot 0 and "removed" in slot 1 as you'd expect. Then mdadm /dev/md2 --add /dev/sda3 ...added it — as a spare again. (Another 3.5 hours down the drain.) So with the rebuilt spare in the array, given that mdadm's man page says RAID-DEVICES CHANGES ... When the number of devices is increased, any hot spares that are present will be activated immediately. ...I grew the array to three devices, to try to activate the "spare": mdadm /dev/md2 --grow --raid-devices=3 What did I get? Two "removed" devices, and the spare. And yet when I do this with a test array, I don't get this behavior. So I nuked /dev/sda3 again, used it to create a brand-new array, and am copying the data from the old array to the new one: rsync -r -t -v --exclude 'lost+found' --progress /mnt/oldarray/* /mnt/newarray This will, of course, take hours. Hopefully when I'm done, I can stop the old array entirely, nuke /dev/sdb3, and add it to the new array. Hopefully, it won't get added as a spare!

Read the article
Why is port 444 open on this router?

- by TJ Thind

I have a Cisco RV110W. I ran nmap at it from the outside and nmap reports that the router has tcp port 444 open. Yet there are no port forwarding rules specifying this port. It should as far as I can tell, be closed. There's even a service listening to that port which I can connect to through telnet. I threw some SNPP commands at it but the service doesn't respond to any of them so I don't believe it's SNPP. Does anyone have any idea why this particular router has tcp port 444 open? I haven't been able to find anything in the manual or on Cisco's website.

Read the article
Simple end-to-end load and bottleneck monitoring for DB-based web sites

- by T.J. Crowder

What tools do you use / would you recommend for monitoring a Linux-based, DB-based website's servers for bottlenecks and load? The obvious goal being to know when growth has gotten to the point where it's necessary to scale up (or out) one or more of the bits and pieces because the current system won't be managing the load if an observed trend continues. I'm looking for general recommendations based on standard Linux load metrics, disk I/O metrics, network I/O metrics, etc., but if specifics are helpful: It'll be Tomcat6 using APR (possibly with a Varnish or similar caching and balancing front-end), MySQL, and either Ubuntu 8.04 LTS or 10.04 LTS depending on timing. I know about top, vmstat, iostat, bwmon and the like that collect and parse info from the /proc file system (et. al.); and obviously MySQL provides a lot of queriable performance information. I could use those directly, probably automating periodic monitoring logs with scripts and such. But I have a suspicion that I'd be reinventing a wheel... For example, Hyperic HQ seems to be along the lines of what I'm looking for. Others? Meta: I tend to think of "recommendation" questions as needing to be CW because there's no one right answer, but I see a lot of these here that aren't CWs, so I haven't marked it as one. I'll happily do so if enough people think I should.

Read the article
Using Office 2003 normal.dot in Office 2010?

- by TJ

I have a user who I have upgraded from office 2003 to Office 2010. This user relies on his custom auto correct that he built into his normal.dot file for Word 2003. He would not like to have to reenter all 200 of his auto corrects. How can I convert his old Normal.dot file with auto corrects to the new Normal.dot for Office 2010?

Read the article
computer and User Account Migrated using ADMT but not sending mail

- by TJ

I have successfully migrated a User and Computer account using ADMT. The user is able to login to the computer with the new account and is able to open outlook receive mail but is not able to send internal or external mail. The Exchange server is still in the Old domain. The bounce back message received was that the user doesn't have permissions to send to the recipient. When I migrated the user I did migrate the SID history so why is mail not being about to be sent? The body of the bounce back message is as follows: Your message did not reach some or all of the intended recipients. Subject: test Sent: 1/6/2010 4:17 PM The following recipient(s) could not be reached: User, user on 1/6/2010 4:17 PM You do not have permission to send to this recipient. For assistance, contact your system administrator. MSEXCH:MSExchangeIS:/DC=com/DC=DOMAIN:SERVER

Read the article
What would make a noise in a PC on graphics operations on a passively-cooled system?

- by T.J. Crowder

I have this system based on the Intel D510MO motherboard, which is basically an Atom D510 (dual-core HT Atom w/built-in GPU), an Intel NM10 chipset, and a Realtek Gigabit LAN controller. It's entirely passively cooled. I noticed almost immediately that there was a kind of very, very soft noise that corresponded with graphics operations, sort of the noise you'd get if you had a sheet of flat paper and slid something really light across it — but more electronic than that. I wrote it off as observation error and/or disk activity triggered by the graphics operation (although the latter seemed like a lot of unnecessary disk activity). It isn't. I got curious enough that I finally did a few controlled experiments, and here's what I've determined: It isn't the HDD. For one thing, the sounds the HDD makes (when seeking, when reading or writing, when just sitting there spinning) is different. For another, I used sudo hdparm -y /dev/sda (I'm using Ubuntu 10.04 LTS) to temporarily put the disk on standby while making sure that non-disk graphics op was happening in a loop. The disk spun down, but the other sound continued, corresponding perfectly with the timing of the graphics op. (Then the disk spun up again, but it takes long enough that I could rule out the HDD.) It isn't the monitor; I ensured the two were well physically-separated and the sound was definitely coming from the main box. It isn't something else in the room; the sound is coming from the box. It isn't cross-talk to an audio circuit coming out the speakers. (It doesn't have any speakers.) It isn't my mouse (e.g., when I'm trying to make graphics ops happen); the sound happens if I set up a recurring operation and don't use the mouse at all, or if I lift the mouse off the table slightly (but enough that the laser still registers movement). It isn't the voices in my head; they never whisper like that. Other observations: It doesn't seem to matter what the graphics operation is; anything that changes what's on the screen seems to do it. I get the sound when moving the mouse over the Chromium tab bar (which makes the tab backgrounds change); I get it when a web page has a counter on it that changes the text on the page: I get it when dragging window contents around. The sound is very, very slightly louder if the graphics op is larger, like scrolling a text area when writing a question on superuser.com, than for smaller operations like the tick counter on the web page. But it's very slight. It's fairly loud (and of good duration) when the op involves color changes to substantial surface areas. For instance, when asking a question here on superuser and you move the cursor between the question box and the tag box, and the help to the right fades out, changes, and fades back in. (Yet another example related to the web browser, so let me say: I hear it when operations completely unrelated to the web browser as well.) It doesn't sound like arcing or anything like that (I'd've shut off the machine Right Quick Like if it did). Moving windows does it. Scrolling windows (by and large) doesn't. I have the feeling I've heard this sort of thing before, when all system fans were on low and such, with other systems — but (again) written it off as observational error. For all the world it's like I'm hearing the CPU working (as opposed to the GPU; note the window scroll thing above) or data being transferred somewhere, but that just seems...unlikely. So what am I hearing? This may seem like a very localized question, but perhaps other silent PC enthusiasts may be interested as well...

Read the article
Will just a couple of thermal "trip" shutdowns typically damage a CPU?

- by T.J. Crowder

The short version If a CPU gets so hot that the system turns itself off because of a thermal trip signal just a couple of times, is it likely that the CPU will be damaged? Or does the trip do its job, turning it off before the CPU gets damaged? (This is with all default settings in the BIOS; I haven't raised any temp thresholds or overclocked anything.) The longer version I just got this Intel Atom D510-based fanless system, installed a 2.5" mobile SATA drive and two 2GB PC2-6400s, closed it up, and having checked everything was recognized in the BIOS, set about installing Ubuntu. After a couple of false starts related, I think, to the external DVD drive I was using, I got the install happily running along. About three-fourths or so of the way through the install, having been running less than an hour, the machine turned itself off. I was actually out of the room at the time, but when I came back and turned it back on, it said it had shut down due to a thermal event. I went into the BIOS and saw that (at that point, having just been turned back on after a couple of minutes off), it was running 87C. As near as I can tell from Intel's docs (PDF here), the max "junction" temperature for the CPU is 100C and it will raise a THERMTRIP signal at 125C. Yowsa. Presumably there will be some back-and-forth with the vendor on this, I'm just wondering whether letting it get that hot a couple of times is likely to end up damaging it.

Read the article
Can you set CIFS permisions from EMC Command Line?

- by TJ.

I am in the process of migrating file shares from my EMC NS-20 to my new VNXe 3100. I am using a RoboCopy script to move the files but am getting errors on some files and folders. I have Domain Admin privileges but when I go to view the security permissions on the folders it says I don't have permissions. I have tried taking ownership to get around the permissions issue but that fails too. So as a last resort can I set permissions on this folder from the EMC console or Web management console?

Read the article
CPU load, USB connection vs. NIC

- by T.J. Crowder

In general, and understanding the answer may vary by manufacturer and model (and driver, and...), in consumer-grade workstations with integrated NICs, does the NIC rely on the CPU for a lot of help (as is typically the case with a USB controller, for instance), or is it fairly intelligent and capable on its own (like, say, the typical Firewire controller)? Or is the question too general to answer? (If it matters, you can assume Linux.) Background: I'm looking at connecting a device (digital television capture) that will be delivering ~20-50 Mbit/sec of data to a somewhat under-powered workstation. I can get a USB 2 High-speed device, or a network-attached device, and am interested in avoiding impacting the CPU where possible. Obviously, if it's a 100Mbit NIC, that's roughly half its theoretical inbound bandwidth, whereas it's only roughly a tenth of the 480 Mbit/second the USB 2 "High Speed" interface. But if the latter requires a lot of CPU support and the former doesn't...

Read the article

1 2 3 4 | Next Page >