Search Results

Search found 5566 results on 223 pages for 'behind'.

Page 158/223 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• AWS: Multi-region setup using single RDS instance

  - by Ion

  I'm trying to scale our web application (PHP, MySQL, memcache) in a multi-region scheme. Currently we are using a setup with two EC2 instances behind an ELB and an RDS instance, all of them in US-EAST (Virginia) region. We would like to have a presence in the EU (Ireland) region as well. This means at least a new EC2 instance there (identical to the others, serving the same application). I have copied the desired AMI, setup the new instance, setup a same ELB configuration (required for SSL termination) and configured latency-based routing in Route53. And it works as suggested. But, clients from EU have speed problems. This is due to the fact that the EU EC2 instances connect to the US-based RDS instance. As far as I know Amazon has not yet enabled RDS multi-region replication. Do you have any suggestions on how to properly speed up the whole setup while using the single RDS instance? Also, any ideas in general on how to scale things up? Ideally we would like to continue using the RDS technology for various reasons. Nevertheless, I am open to suggestions (I guess the next idea would be to host our own MySQL servers).

  Read the article

• How to diagnose storage system scaling problems?

  - by Unknown

  We are currently testing the maximum sequential read throughput of a storage system (48 disks total behind two HP P2000 arrays) connected to HP DL580 G7 running RHEL 5 with 128 GB of memory. Initial testing has been mainly done by running DD-commands like this: dd if=/dev/mapper/mpath1 of=/dev/null bs=1M count=3000 In parallel for each disk. However, we have been unable to scale the results from one array (maximum throughput of 1.3 GB/s) to two (almost the same throughput). Each array is connected to a dedicated host bust adapter, so they should not be the bottleneck. The disks are currently in JBOD configuration, so each disk can be addressed directly. I have two questions: Is running multiple DD commands in parallel really a good way to test maximum read throughput? We have noticed very high SWAPIN-% numbers in iotop, which I find hard to explain because the target is /dev/null How shoud we proceed in trying to find the reason for the scaling problem? Do you thing the server itself is the bottleneck here, or could there be some linux parameters that we have overlooked?

  Read the article

• How to prevent asymmetric routing with multiple eBGP routers?

  - by Andy Shinn

  I have 2 routers announcing a /22 subnet to different providers (one providers connects to each of the 2 routers). I have split the /22 in two /23 to announce one /23 on each of the routers plus the /22 (the providers will take the more specific route). This allows me to fail over and keep traffic inside the /23 in and out the same provider. What are other ways in which I could announce just the /22 with both routers and have packets from servers on the network behind the routers go back out the same router in which they came in from? EDIT: The main problem I come across, which end users and clients complain about the most, is that the least hop route is sometimes not the "optimal" route. In my case, I know that Provider B may have better latency to X nation. But when packets come in from provider B, they may go out Provider A or provider B. The reverse is also true. If I send a packet to X nation out provider A, even though it may have more hops back, the packet will likely come in from Provider B (which may have higher latency, packet loss, etc. to this nation)

  Read the article

• Copying files between linux machines with strong authentication but without encryption

  - by Zizzencs

  I'm looking for a suitable program to copy files from one linux machine to another one. The program should be able to do authentication but it should not do encryption. The reason behind the latter is the lack of CPU power to do the encryption. I copy backups from ~70 machines to a single backup server simultaneously. The single server is an HP Proliant DL360 G7, with 10 Gbps ethernet connection and an FC storage backend that can do 4 Gbps. Through FTP I can write ~400MB/sec to the storage (that's about what I want) but through ssh with arcfour I can only do ~100MB/sec while having 100% CPU usage. That's why I want file transfers not to be encrypted. The alternatives that I found not really suitable: rcp: no authentication, forget it FTP: making the authentication "secure" (at least preventing plain-text password exchange) is possible but not really easy and I haven't found a method to force any FTP daemon to encrypt the control channel (for the authentication) and not to encrypt the data channel (for data transfers) SCP/SFTP: in farely recent ssh(d) implementations you can't turn off encryption. The best you can do is to use the arcfour cypher for the encryption but it sill uses too much CPU power for my needs. rsync over ssh: same problems as with SCP/SFTP. plain rsync: from the documentation of rsyncd: "The authentication protocol used in rsync is a 128 bit MD4 based challenge response system. This is fairly weak protection, though (with at least one brute-force hash-finding algorithm publicly available), so if you want really top-quality security, then I recommend that you run rsync over ssh." It's a no-go. Is there a protocol/program that can do exactly what I want? (A big plus would be if it could work on windows as well and/or if it would support rsync-stlye copying/synchronization (e.g. copy only the differences).)

  Read the article

• Can I use iptables on my Varnish server to forward HTTPS traffic to a specific server?

  - by Dylan Beattie

  We use Varnish as our front-end web cache and load balancer, so we have a Linux server in our development environment, running Varnish with some basic caching and load-balancing rules across a pair of Windows 2008 IIS web servers. We have a wildcard DNS rule that points *.development at this Varnish box, so we can browse http://www.mysite.com.development, http://www.othersite.com.development, etc. The problem is that since Varnish can't handle HTTPS traffic, we can't access https://www.mysite.com.development/ For dev/testing, we don't need any acceleration or load-balancing - all I need is to tell this box to act as a dumb proxy and forward any incoming requests on port 443 to a specific IIS server. I suspect iptables may offer a solution but it's been a long while since I wrote an iptables rule. Some initial hacking has got me as far as iptables -F iptables -A INPUT -p tcp -m tcp --sport 443 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 443 -j ACCEPT iptables -t nat -A PREROUTING -p tcp --dport 443 -j DNAT --to 10.0.0.241:443 iptables -t nat -A POSTROUTING -p tcp -d 10.0.0.241 --dport 443 -j MASQUERADE iptables -A INPUT -j LOG --log-level 4 --log-prefix 'PreRouting ' iptables -A OUTPUT -j LOG --log-level 4 --log-prefix 'PostRouting ' iptables-save > /etc/iptables.rules (where 10.0.0.241 is the IIS box hosting the HTTPS website), but this doesn't appear to be working. To clarify - I realize there's security implications about HTTPS proxying/caching - all I'm looking for is completely transparent IP traffic forwarding. I don't need to decrypt, cache or inspect any of the packets; I just want anything on port 443 to flow through the Linux box to the IIS box behind it as though the Linux box wasn't even there. Any help gratefully received... EDIT: Included full iptables config script.

  Read the article

• Setup windows 2012 AD in Hyper-V for a Test environment

  - by hub

  Im trying to setup a Windos 2012 R2 test environment on my work computer (a laptop). I have a AD, DHCP and DNS server on server A, and a client connecting to the doman and that works. The client can ping the AD server and gets a valid IP adress. If I ping google.com from the client I get the IP adress but I dont get any responses (request time out). If i ping google.com from server A it works as it should. Server A have a connection to the Internet through a "external network switch" in hyper-v, which gets its internet from a router and the client is connected to a "internal network switch". May the poblem be that server A is behind a router? Can I make this solution to work regadless the network my laptop is connected to? At home i have one IP adress, at work its a totally different range. What I would like is to use my laptops internet connection, regardless wifi or wired, to act as incomming internet, is this possible?

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• How can I remedy the always-on-top window problem?

  - by GateKiller

  Sorry for the vague title but this one is hard to explain so bear with me please. I'm using Windows Vista at work for web development and sometimes when I Click or Alt-Tab to background window, the window will get focus but it will not be brought to the front. In order to bring the window to the front, I have to click on the applications border (when the resize cursor appears) and the window will then jump to the front. I've had this problem for about a year now and it happens at least a dozen times a day, but it doesn't do this all the time - seems random. I hope I have explained the issue fully (and you've understood it) and would appreciate any constructive answers or comments to solve this problem. Example: If I Alt-Tab from Google Chrome to Notepad and this problem randomly occurs, Google Chrome will remain in front of Notepad, however, I will be able to type text into Notepad while the window is behind Google Chrome. Clicking on Notepad's content area will not bring it to the front but clicking it's window border will. Video Exampe http://vimeo.com/19388998 In this video, I clicked from Google Chome to UltraEdit and chrome stayed in font, but as you can see, I can still type in UltraEdit. I'm starting to believe that this could be a bug in Google Chrome so I'll continue to watch if this between other applications.

  Read the article

• Using Active Directory through a Firewall

  - by Adam Brand

  I had kind of a weird setup today where I wanted to enable Windows Firewall on a Windows 2003 R2 SP2 computer that would act as an Active Directory Domain Controller. I didn't see one resource on the Internet that listed what would be required to do this, so I thought I'd list them here and see if anyone has anything to add/sees something that isn't necessary. Ports to Open with "subnet" scope: 42 | TCP | WINS (if you use it) 53 | TCP | DNS 53 | UDP | DNS 88 | TCP | Kerberos 88 | UDP | Kerberos 123 | UDP | NTP 135 | TCP | RPC 135 | UDP | RPC 137 | UDP | NetBIOS 138 | UDP | NetBIOS 139 | TCP | NetBIOS 389 | TCP | LDAP 389 | UDP | LDAP 445 | TCP | SMB 445 | UDP | SMB 636 | TCP | LDAPS 3268 | TCP | GC LDAP 3269 | TCP | GC LDAP Ports to Open with "Any" Scope (for DHCP) 67 | UDP | DHCP 2535 | UDP | DHCP ALSO You need to restrict RPC to use fixed ports instead of everything 1024. For that, you need to add two registry keys: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NTDS\Parameters Registry value: TCP/IP Port Value type: REG_DWORD Value data: <-- pick a port like 1600 and put it here HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters Registry value: DCTcpipPort Value type: REG_DWORD Value data: <-- pick another port like 1650 and put it here ...don't forget to add entries in the firewall to allow those in (TCP, Subnet scope). After doing all that, I was able to add a client computer to the AD domain (behind Windows Firewall) and log in successfully.

  Read the article

• Am I able to forward traffic from an external subdomain to a specific local host?

  - by George Bowman

  I apologise in advance if the question doesn't make sense, please let me know. I've got a small LAN (~10 Virtual Servers) using Win Server 2008 as a DNS server. This is behind a smoothwall express 3.0 firewall with ports forwarded for specific services. I have a domain (123-reg) with the NS's that of afraid.org (DynamicDNS) and subdomains pointed to my (Dynamic) IP address e.g. subdomain1.example.com - 123.456.789.101. I think that adequately explains my set up. My question is, am I able to have subdomains e.g. subdomain1.example.com only point to a specific local host? Like so: subdomain1.example.com:80 - firewall(external facing) - server1.example.com:80 subdomain2.example.com:80 - firewall(external facing) - server2.example.com:80 I don't actually necessarily want to use port 80, otherwise I would just use VirtualHosts on apache, it is just an example port. Currently I can use either subdomain1.example.com OR subdomain2.example.com and they will both point to server1.example.com:80 I do not have to stay using Win Server 2008 for DNS, I am more than happy to move over to BIND if needs be, it was just easier to use Win Server 2008's DNS. I do not know if this is even possible, I have a feeling it isn't as I've only got one external IP address but any information is useful!

  Read the article

• Windows/IIS Hosting :: How much is too much?

  - by bsisupport

  I have 4 Windows 2003 servers running IIS 6. These servers host a bunch of unique web sites (in that they are all different in build/architecture/etc). The code behind these sites range from straight HTML, classic ASP, and 1.1/2.0/3.x flavors of .NET. Some (most) of the sites use a SQL backend, which is hosted on one or two different servers – not the IIS servers themselves. No virtualization on these servers and no load balancing for these particular sites. The problem I’m running into is coming up with some baseline metrics to determine, or basically come up with a “baseline score” to know when a web server has reached its hosting limit. Today, some basic information about each server is used: how much bandwidth does the server pump out, hard drive space availability, and basic (very basic) RAM & CPU utilization (what it looks like at peak traffic times.) I would be grateful if those of you that are 1000x smarter than I am could indulge me with your methods of managing IIS environments. Whether performance monitoring specifics, “score” determination as I’m trying to determine, or the obvious combination of both. Thanks in advance.

  Read the article

• Terminal emulation has stopped working. Garbage escape chars

  - by oligofren

  To enable me to do some remote administration of our servers I started using a terminal emulation program called TouchTerm Pro on my iPhone. While not the smoothest experience, it has allowed me to leave my computer behind when going out of town, which makes the slightly painful experience worthwhile. As of late, the app unfortunately no longer works. Pressing up and down keys after logging on via ssh gives me garbage like ^[[A and ^[[B. Combinations with Ctrl - like you can see in the video - no longer works either. Writing full command lines and executing by the enter key works though. Being able to search my bash history was the difference between a usable app and endless frustration, so getting it to work is essential. The app has (of course) met its end of life, not getting updated anymore. I am not quite sure, which side (client or server) that has to be "fixed"/hacked to make the control sequences work again. But is there something I can do to make it work as intended? You can see a video of TouchTerm in operation here.

  Read the article

• Menu command stuck on screen

  - by 280Z28

  For some reason, periodically when I select a menu command, the command label gets "stuck" on the screen and won't go away. I can close all open applications, including whichever one I was using when it got stuck, but it still won't go away. In the screenshot below, I opened an new instance of IE just to show how the label stays on top. The label was not created by this instance of IE. Edit with the source: The label that gets stuck is the first menu command I select in IE. If a label is already stuck, a new one does not get stuck (regardless of which instance(s) of IE are involved). Based on this knowledge, I now just open IE on my secondary monitor, carefully open the context menu so the Properties command is in the bottom corner, and click it. This is not a solution... The label never moves and is transparent to mouse input (if I click it, it's as if I clicked the item behind it). The label does not go away if I close all running applications. I haven't tried stopping services or closing system tray items like Live Mesh. The label does go away if I change the screen resolution and then change it back. Any ideas how I can stop this from happening? It's happened a half dozen times since yesterday and it's becoming quite disrupting to my work. Obviously I added the circle in MS Paint. That part isn't stuck. ;)

  Read the article

• Trouble connecting to a local SQL server instance from the web

  - by dfarney

  We have a small network behind a firewall (WatchGuard XTM 2 series) and network switch. On our network we have multiple instances of SQL server, but 1 in specific that I would like to be able to access remotely from our website. We have a static IP address from our ISP and then all the machines on the network have a locally assigned dynamic IP address. When trying to connect to the database from outside our network how do I get the request to be directed to the proper machine / SQL instance? Is it a parameter in my connection string or something in my firewall? A few things to rule out: 1) The firewall is allowing access from the website to our network. I added the site's IP and opened up port 1433. Also, when trying to connect and monitoring the firewall no exceptions come up as they did before I added the proper IP address. 2) Remote connections on the SQL server has been setup and enabled. I've done a lot of reading up on remote connections and I am sure it has been setup properly. I am currently getting this error message on my site: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)

  Read the article

• I need a reverse proxy solution for SSH

  - by Bond

  Hi here is a situation I have a server in a corporate data center for a project. I have an SSH access to this machine at port 22.There are some virtual machines running on this server and then at the back of every thing many other Operating systems are working. Now Since I am behind the data centers firewall my supervisor asked me if I can do some thing by which I can give many people on Internet access to these virtual machines directly. I know if I were allowed to get traffic on port other than 22 then I can do a port forwarding. But since I am not allowed this so what can be a solution in this case. The people who would like to connect might be complete idiots.Who may be happy just by opening putty at their machines or may be even filezilla.I have configured an Apache Reverse Proxy for redirecting the Internet traffic to the virtual machines on these hosts.But I am not clear as for SSH what can I do.So is there some thing equivalent to an Apache Reverse Proxy which can do similar work for SSH in this situation. I do not have firewall in my hands or any port other than 22 open and in fact even if I request they wont allow to open.2 times SSH is not some thing that my supervisor wants.

  Read the article

• CloudFront with Custom Origin and ELB

  - by kmfk

  We are using CloudFront for our static assets but also wanted to allow for Gzip. We set up a new distribution with a custom origin pointing back to our application servers which are behind a elastic load balancer. We manually keep the files in sync across the cluster and update them when we publish. However, with this set up, we get nothing but Miss and RefreshHits from CloudFront, which so far has defeated the purpose. Is there any additional settings in order to use an ELB as your custom origin? In the docs, it references this as a viable solution. It appears when we point the distribution to a single server in our production cluster, cloudfront properly caches our assets. Is it possible that the sticky sessions cookie and the subsequent header that gets added by it could be an issue? Cache-Control: no-cache="set-cookie" //Added by load balancer Any ideas? FYI - currently, we have our custom origin pointing to a single EC2 instance, so caching is working correctly - in case you try to curl the file below. Example headers: curl -I http://static.quick-cdn.com/css/9850999.css HTTP/1.0 200 OK Accept-Ranges: bytes Cache-Control: max-age=3700 Cache-Control: no-cache="set-cookie" Content-Length: 23038 Content-Type: text/css Date: Thu, 12 Apr 2012 23:03:52 GMT Last-Modified: Thu, 12 Apr 2012 23:00:14 GMT Server: Apache/2.2.17 (Ubuntu) Vary: Accept-Encoding X-Cache: RefreshHit from cloudfront X-Amz-Cf-Id: K_q7Zy3_jdzlEJ85ukELVtdx1GmuXqApAbZZ7G0fPt0mxRMqPKX5pQ==,RzJmPku-rEIO9WlvuSoKa8hiAaR3dLk5KC4cQMWWrf_MDhmjWe8n6A== Via: 1.0 28c34f9fbf559a21ee16594849e4fc9c.cloudfront.net (CloudFront) Connection: close

  Read the article

• Nginx terminate SSL for wordpress

  - by Mike

  I have a bit of a problem. We run a wordpress blog behind a ngnix proxy and looking to terminate the ssl on the nginx side. Our current nginx config is upstream admin_nossl { server 192.168.100.36:80; } server { listen 192.168.71.178:443; server_name host.domain.com; ssl on; ssl_certificate /etc/nginx/wild.domain.com.crt; ssl_certificate_key /etc/nginx/wild.domain.com.key; ssl_session_timeout 5m; ssl_protocols SSLv2 SSLv3 TLSv1; ssl_prefer_server_ciphers on; ssl_session_cache shared:SSL:10m; ssl_ciphers RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; location / { proxy_read_timeout 2000; proxy_next_upstream error; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; proxy_max_temp_file_size 0; proxy_pass http://admin_nossl; break; It just does not seem to work. If I can hit https://host.domain.com but it quickly switches back to non-secured from what I can see. Any pointers?

  Read the article

• Hide/Replace Nginx Location Header?

  - by Steven Ou

  I am trying to pass a PCI compliance test, and I'm getting a single "high risk vulnerability". The problem is described as: Information on the machine which a web server is located is sometimes included in the header of a web page. Under certain circumstances that information may include local information from behind a firewall or proxy server such as the local IP address. It looks like Nginx is responding with: Service: https Received: HTTP/1.1 302 Found Cache-Control: no-cache Content-Type: text/html; charset=utf-8 Location: http://ip-10-194-73-254/ Server: nginx/1.0.4 + Phusion Passenger 3.0.7 (mod_rails/mod_rack) Status: 302 X-Powered-By: Phusion Passenger (mod_rails/mod_rack) 3.0.7 X-Runtime: 0 Content-Length: 90 Connection: Close <html><body>You are being <a href="http://ip-10-194-73-254/">redirect ed</a>.</body></html> I'm no expert, so please correct me if I'm wrong: but from what I gathered, I think the problem is that the Location header is returning http://ip-10-194-73-254/, which is a private address, when it should be returning our domain name (which is ravn.com). So, I'm guessing I need to either hide or replace the Location header somehow? I'm a programmer and not a server admin so I have no idea what to do... Any help would be greatly appreciated! Also, might I add that we're running more than 1 server, so the configuration would need to be transferable to any server with any private address.

  Read the article

• Why is it a bad idea to use a customer email as the from address

  - by Crab Bucket

  I've got an application that emails users once they have filled in a form. It uses a [email protected] as a from address. The customer wants it to use the email from the form as the from address which could be anything. I have been told that this is a bad idea due to spoofing/blacklisting and spam. I feel really vague about the exact reason about why this is a bad idea particularly as i've got to try to counsel the client out of this. Can someone explain to me why this is a bad idea. Interestingly the client has used a gmail account as the from address as a demo which not only works fine but has enabled the application to start sending emails (it wouldn't do it before with an email which was [email protected]). Erm - what is going on. I'm told one thing and the opposite works. Sorry - i know this is basic but I could find anything on a google search. Largely I think because I'm having trouble even framing the question. EDIT Thank you everyone - great answers. Interestingly the server sending the email and the mail box that it is going to are both behind the same firewall so the client says they are unconcerned about spam. Oh well.

  Read the article

• Blocking of certain file downloads

  - by Philip Fourie

  I have a problem where I cannot completely download a certain file from a server. The file is 1.9MB in size but only 68% is downloaded and then it hangs. I tried and these cases, which failed: Downloaded the file with HTTP Downloaded the file with FTP Moved the file to different FTP and web servers behind the ISA firewall Tried with IIS 6.0 & IIS 7.0 Multiple download clients. Which included FireFox, FileZilla (on Windows) and wget (on Linux) This worked: Downloading other files from the same location on the server. Both bigger and smaller and in size than the original. FTP and HTTP worked. Earlier version of this file (.DLL) works. It is as if the content of this file has an influence on this file being served. Network architecture: Client Machine - Internet (ISP) - ISA Server - IIS 7.0 The only constants are the ISP, Cisco router and the ISA server. Is it possible that something is rejecting the download because of the contents of the file? I am hoping ISA is the culprit... I am not a ISA expert is there somewhere I can look to establish if it is indeed ISA causing this? Update: Splitting the file into two parts with a hex editor results in one half of the file being served correctly and the other part not. Zipping the file results in the file being downloaded successfully. However this is not an option for this particular scenario. Renaming the file and its extension also doesn't work. Update 2009/10/22: It does NOT seems to be ISA that is causing this problem. We connected a laptop (running IIS) on an available public IP and still the file download to 68% before it hanged. The two remaining components are the ISP and the Cisco 800 series router. Anyone knows about an issue on the router perhaps?

  Read the article

• Windows 8 Internet Explorer 11 proxy automation script

  - by Stefan Bollmann

  Similar to this post, I'd like to change my proxy settings using a script. However, it fails. When I am behind the proxy, IE does not connect to the internet. Here I try the first solution from craig: function FindProxyForURL(url, host) { if (isInNet(myIpAddress(), "myactualip", "myactualsubnetip")) return "PROXY proxyasshowninpicture:portihavetouseforthisproxy_see_picture"; else return "DIRECT"; } This script is saved as proxy.pac in c:\windows and my configuration is* in LAN settings: No automatically detected settings, yes, use automatic config script: file://c:/windows/proxy.pac No proxy server. So, what am I doing wrong? ---------------- update -------------- However, when I set up a proxy in my LAN configurations: IE -> Internet Options -> Connections -> LAN Settings check: Use a proxy Server for your LAN Address: <a pingable proxy> Port: <portnr> everything is fine for this environment. Now I try a simpler script like function FindProxyForURL(url, host) { return "PROXY <pingable proxy>:<portnr>; DIRECT"; } With a configuration described above** I am not able to get through the proxy.

  Read the article

• How is network mounted software executed?

  - by CptSupermrkt

  I would like to understand how network mounted software works. For example, at my place of work, we have a software server. Each client machine (hundreds of them) automatically mounts directories from the software server on boot. For example, a program like Matlab is installed just once on the software server, but each client machine can start up an instance of Matlab. What is going on under the hood? Let's say I run /opt/bin/matlab and /opt/ is mounted from the software server, what happens when I press Enter to execute matlab on a client machine? The process is on the client machine, and I've already narrowed down that there isn't any implicit or hidden file transfer (i.e. copying matlab to my machine temporarily for that session) by running matlab on a computer with nearly zero disk space (i.e. not enough room to transfer). Since Matlab was installed on the server, how is my client computer executing it? What mechanism is controlling this? What is happening behind the scenes?

  Read the article

• ERROR: Not enough space?

  - by dsmoljanovic

  Now this is a very unspecific question. I'm trying to figure out what this message would mean. Here is the story behind it: I'm installing Oracle enterprise manager cloud control (12c r3) on Solaris 10 (5/09). Installer opens up, i enter all needed information and at the last step click Install. It immediately crashes with only "ERROR: Not enough space" written in log and console and nothing else. Now, this could be java error or Solaris error? I'm thinking it's happening either when it starts to copy files or when it tries to launch a process that would do that. What space is it referring to? disk (have ehough), swap (also), memory (yep)... Any ideas are helpful. Edit: i found this exception in the oraInventory logs: oracle.sysman.oii.oiic.OiicInstallAPIException: Not enough space at oracle.sysman.oii.oiic.OiicAPIInstaller.initInstallSession(OiicAPIInstaller.java:2165) at oracle.sysman.oii.oiic.OiicAPIInstaller.initOUIAPISession(OiicAPIInstaller.java:790) at oracle.sysman.install.oneclick.EMGCOUIInstaller.prepareForInstall(EMGCOUIInstaller.java:676) at oracle.sysman.install.oneclick.EMGCSummaryDlgonNext$1.run(EMGCSummaryDlgonNext.java:243) at java.lang.Thread.run(Thread.java:662) at oracle.sysman.install.oneclick.EMGCSummaryDlgonNext.actionsOnClickofNext(EMGCSummaryDlgonNext.java:1067) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at oracle.sysman.install.oneclick.EMGCUtil.performonClickOfNextForClass(EMGCUtil.java:399) at oracle.sysman.install.oneclick.EMGCUtil.performPageLevelValidationsForSilentInstall(EMGCUtil.java:367) at oracle.sysman.install.oneclick.EMGCInstaller.prepareForSilentInstall(EMGCInstaller.java:1459) at oracle.sysman.install.oneclick.EMGCInstaller.main(EMGCInstaller.java:1553) disk status: bash-3.00$ df -h /tmp Filesystem size used avail capacity Mounted on swap 8.1G 2.7G 5.4G 33% /tmp bash-3.00$ df -h /u01 Filesystem size used avail capacity Mounted on / 275G 28G 244G 11% / swap: root@gs12emcc # swap -s total: 18306040k bytes allocated + 3837808k reserved = 22143848k used, 5712664k available

  Read the article

• How to set a static route for an external IP address

  - by HorusKol

  Further to my earlier question about bridging different subnets - I now need to route requests for one particular IP address differently to all other traffic. I have the following routing in my iptables on our router: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface #1 (10.1.1.0/24) # eth2 = private interface #2 (129.2.2.0/25) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth2 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interfaces iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT # Allow the two private connections to talk to each other iptables -A FORWARD -i eth1 -o eth2 -j ACCEPT iptables -A FORWARD -i eth2 -o eth1 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT iptables -A FORWARD -i eth0 -o eth2 -j REJECT This configuration means that users will be forwarded through a modem/router with a public address - this is all well and good for most purposes, and in the main it doesn't matter that all computers are hidden behind the one public IP. However, some users need to be able to access a proxy at 192.111.222.111:8080 - and the proxy needs to identify this traffic as coming through a gateway at 129.2.2.126 - it won't respond otherwise. I tried adding a static route on our local gateway with: route add -host 192.111.222.111 gw 129.2.2.126 dev eth2 I can successfully ping 192.111.222.111 from the router. When I trace the route, it lists the 129.2.2.126 gateway, but I just get * on each of the following hops (I think this makes sense since this is just a web-proxy and requires authentication). When I try to ping this address from a host on the 129.2.2.0/25 network it fails. Should I do this in the iptables chain instead? How would I configure this routing?

  Read the article

• Windows 2008 R2 file share - any way to "lock it down" outside of a 3rd party app?

  - by TheCleaner

  I have a 3rd party app that "makes a call" to write files to a file share on our network using the currently logged in credentials of the Windows domain user. Meaning the 3rd party app doesn't pass the apps credentials but simply issues a behind the scenes copy command to take a source file specified and copy/move it to the destination "repository" on the file share. The basic premise is that it keeps revisions/approvals for Document Control (think svn/git I guess, similar to this question: Lock down Windows folder to only be updatable by SVN). This all works fine...but here's my issue: I need a way to lock down the file share from being accessed/modified outside of using the 3rd party app (meaning prevent explorer/word/excel/etc from getting to that share). I know I can do the following: make the share a hidden share ($) - this definitely helps. Most users would have zero clue on how to get to such a share. Solves probably 95% of my issue. go one step further and set the "Hidden" attribute on the folders in the hidden share - this would go a little further in that even if a user knows the path to the hidden share like \\server\hidden$ they still won't see folders in that share without changing their explorer options to "show hidden files/folder Any other ideas on how I can lock this down? The users still need modify rights to this share/folders since the 3rd party app relies on their Windows permissions to that location when copying the files into it. I can't really use 3rd party tools to password protect the folder/share without causing the 3rd party app functions to fail.

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >