Search Results

Search found 7114 results on 285 pages for 'hope'.

Page 158/285 | < Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >

• The curious case of SOA Human tasks' automatic completion

  - by Kavitha Srinivasan

  A large south-Asian insurance industry customer using Oracle BPM and SOA ran into this. I have survived this ordeal previously myself but didnt think to blog it then. However, it seems like a good idea to share this knowledge with this reader community and so here goes.. Symptom: A human task (in a SOA/BPEL/BPM process) completes automatically while it should have been assigned to a proper user.There are no stack traces, no related exceptions in the logs. Why: The product is designed to treat human tasks that don't have assignees as one that is eligible for completion. And hence no warning/error messages are recorded in the logs. Usecase variant: A variant of this usecase, where an assignee doesnt exist in the repository is treated as a recoverable error. One can find this in the 'pending recovery' instances in EM and reactivate the task by changing the assignees in the bpm workspace as a process owner /administrator. But back to the usecase when tasks get completed automatically... When: This happens when the users/groups assigned to a task are 'empty' or null. This has been seen only on tasks whose assignees are derived from an assignment expression - ie at runtime an XPath is used to determine who to assign the task to. (This should not happen if task assignees are populated via swim-lane roles.) How to detect this in EM For instances that are auto-completed thus, one will notice in the Audit Trail of such instances, that the 'outcome' of the task is empty. The 'acquired by' element will also show as empty/null. Enabling the oracle.soa.services.workflow.* logger in em should print more verbose messages about this. How to fix this The application code needs two fixes: input to HT: The XSLT/XPath used  to set the task 'assignee' and the process itself should be enhanced to handle nulls better. For eg: if no-data-found, set assignees to alternate value, force default assignees etc. output from HT: Additionally, in the application code, check that the 'outcome' of the HT is not-null. If null, route the task to be performed again after setting the assignee correctly. Beginning PS4FP, one should be able to use 'grab' to route back to the task to fire again. Hope this helps. 

  Read the article

• PeopleSoft HCM @ OHUG 11: Enter the Matrix

  - by Jay Zuckert

  The PeopleSoft HCM team is back from a very busy and exciting OHUG conference in Orlando. The packed, standing-room only PeopleSoft HCM Roadmap keynote was the highlight of the conference for many attendees and the reviews are in : PeopleSoft rocked the house ! Great demonstration of products in the keynote. Best keynote in a long time, and fun. Engaging and entertaining, great demonstration of capabilities. Message received loud and clear, PeopleSoft applications are here to stay.  PeopleSoft has a real vision moving forward. Real-time polls using mobile texting were cutting edge.                          Tracy Martin (as Trinity) and other members of the PeopleSoft HCM team presented a ‘must-see’ Matrix-themed session while dressed as movie characters. The keynote highlighted planned HCM capabilities for Matrix administration and future organization visualization enhancements. The team also previewed the planned Manager Dashboard and Talent Summary.                           Following the keynote, some of the cast posed for photo opportunities at the OHUG booth in the exhibition hall. As you can imagine, they received some interesting looks walking by the other vendor booths. The PeopleSoft HCM team also presented numerous other OHUG sessions covering PeopleSoft Talent Management, Compensation, HR HelpDesk, Payroll, Global HCM Practices, Time & Labor, Absence Management, and Benefits. All of those presentations are available from the OHUG site at www.ohug.org. When not in one of the well-attended PeopleSoft HCM sessions, conference attendees filled the Oracle booth in the exhibition hall to see live product demonstrations. True to their PeopleSoft roots, some of the PeopleSoft HCM team played as hard as they worked in Orlando and enjoyed the OHUG Appreciation event along with customers at the Hard Rock. We are already busy planning for Oracle OpenWorld 2011 and prepping sessions our PeopleSoft HCM customers are sure to like. We hope to see you there in San Francisco from Oct. 2-6. To learn more about OpenWorld or to register, click here.

  Read the article

• Looking into ASP.Net MVC 4.0 Mobile Development - part 2

  - by nikolaosk

  In this post I will be continuing my discussion on ASP.Net MVC 4.0 mobile development. You can have a look at my first post on the subject here . Make sure you read it and understand it well before you move one reading the remaining of this post. I will not be writing any code in this post. I will try to explain a few concepts related to the MVC 4.0 mobile functionality. In this post I will be looking into the Browser Overriding feature in ASP.Net MVC 4.0. By that I mean that we override the user agent for a given user session. This is very useful feature for people who visit a site through a device and they experience the mobile version of the site, but what they really want is the option to be able to switch to the desktop view. "Why they might want to do that?", you might wonder.Well first of all the users of our ASP.Net MVC 4.0 application will appreciate that they have the option to switch views while some others will think that they will enjoy more the contents of our website with the "desktop view" since the mobile device they view our site has a quite large display.  Obviously this is only one site. These are just different views that are rendered.To put it simply, browser overriding lets our application treat requests as if they were coming from a different browser rather than the one they are actually from. In order to do that programmatically we must have a look at the System.Web.WebPages namespace and the classes in it. Most specifically the class BrowserHelpers. Have a look at the picture below   In this class we see some extension methods for HttpContext class.These methods are called extensions-helpers methods and we use them to switch to one browser from another thus overriding the current/actual browser. These APIs have effect on layout,views and partial views and will not affect any other ASP.Net Request.Browser related functionality.The overridden browser is stored in a cookie. Let me explain what some of these methods do. SetOverriddenBrowser() -  let us set the user agent string to specific value GetOverriddenBrowser() -  let us get the overridden value ClearOverriddenBrowser() -  let us remove any overridden user agent for the current request   To recap, in our ASP.Net MVC 4.0 applications when our application is viewed in our mobile devices, we can have a link like "Desktop View" for all those who desperately want to see the site with in full desktop-browser version.We then can specify a browser type override. My controller class (snippet of code) that is responsible for handling the switching could be something like that. public class SwitchViewController : Controller{ public RedirectResult SwitchView(bool mobile, string returnUrl){if (Request.Browser.IsMobileDevice == mobile)HttpContext.ClearOverriddenBrowser();elseHttpContext.SetOverriddenBrowser(mobile ? BrowserOverride.Mobile : BrowserOverride.Desktop);return Redirect(returnUrl);}} Hope it helps!!!!

  Read the article

• SQL SERVER – Introduction to PERCENTILE_DISC() – Analytic Functions Introduced in SQL Server 2012

  - by pinaldave

  SQL Server 2012 introduces new analytical function PERCENTILE_DISC(). The book online gives following definition of this function: Computes a specific percentile for sorted values in an entire rowset or within distinct partitions of a rowset in Microsoft SQL Server 2012 Release Candidate 0 (RC 0). For a given percentile value P, PERCENTILE_DISC sorts the values of the expression in the ORDER BY clause and returns the value with the smallest CUME_DIST value (with respect to the same sort specification) that is greater than or equal to P. If you are clear with understanding of the function – no need to read further. If you got lost here is the same in simple words – find value of the column which is equal or more than CUME_DIST. Before you continue reading this blog I strongly suggest you read about CUME_DIST function over here Introduction to CUME_DIST – Analytic Functions Introduced in SQL Server 2012. Now let’s have fun following query: USE AdventureWorks GO SELECT SalesOrderID, OrderQty, ProductID, CUME_DIST() OVER(PARTITION BY SalesOrderID ORDER BY ProductID ) AS CDist, PERCENTILE_DISC(0.5) WITHIN GROUP (ORDER BY ProductID) OVER (PARTITION BY SalesOrderID) AS PercentileDisc FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY SalesOrderID DESC GO The above query will give us the following result: You can see that I have used PERCENTILE_DISC(0.5) in query, which is similar to finding median but not exactly. PERCENTILE_DISC() function takes a percentile as a passing parameters. It returns the value as answer which value is equal or great to the percentile value which is passed into the example. For example in above example we are passing 0.5 into the PERCENTILE_DISC() function. It will go through the resultset and identify which rows has values which are equal to or great than 0.5. In first example it found two rows which are equal to 0.5 and the value of ProductID of that row is the answer of PERCENTILE_DISC(). In some third windowed resultset there is only single row with the CUME_DIST() value as 1 and that is for sure higher than 0.5 making it as a answer. To make sure that we are clear with this example properly. Here is one more example where I am passing 0.6 as a percentile. Now let’s have fun following query: USE AdventureWorks GO SELECT SalesOrderID, OrderQty, ProductID, CUME_DIST() OVER(PARTITION BY SalesOrderID ORDER BY ProductID ) AS CDist, PERCENTILE_DISC(0.6) WITHIN GROUP (ORDER BY ProductID) OVER (PARTITION BY SalesOrderID) AS PercentileDisc FROM Sales.SalesOrderDetail WHERE SalesOrderID IN (43670, 43669, 43667, 43663) ORDER BY SalesOrderID DESC GO The above query will give us the following result: The result of the PERCENTILE_DISC(0.6) is ProductID of which CUME_DIST() is more than 0.6. This means for SalesOrderID 43670 has row with CUME_DIST() 0.75 is the qualified row, resulting answer 773 for ProductID. I hope this explanation makes it further clear. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Function, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Using MVP, how to create a view from another view, linked with the same model object

  - by Dinaiz

  Background We use the Model-View-Presenter design pattern along with the abstract factory pattern and the "signal/slot" pattern in our application, to fullfill 2 main requirements Enhance testability (very lightweight GUI, every action can be simulated in unit tests) Make the "view" totally independant from the rest, so we can change the actual view implementation, without changing anything else In order to do so our code is divided in 4 layers : Core : which holds the model Presenter : which manages interactions between the view interfaces (see bellow) and the core View Interfaces : they define the signals and slots for a View, but not the implementation Views : the actual implementation of the views When the presenter creates or deals with views, it uses an abstract factory and only knows about the view interfaces. It does the signal/slot binding between views interfaces. It doesn't care about the actual implementation. In the "views" layer, we have a concrete factory which deals with implementations. The signal/slot mechanism is implemented using a custom framework built upon boost::function. Really, what we have is something like that : http://martinfowler.com/eaaDev/PassiveScreen.html Everything works fine. The problem However, there's a problem I don't know how to solve. Let's take for example a very simple drag and drop example. I have two ContainersViews (ContainerView1, ContainerView2). ContainerView1 has an ItemView1. I drag the ItemView1 from ContainerView1 to ContainerView2. ContainerView2 must create an ItemView2, of a different type, but which "points" to the same model object as ItemView1. So the ContainerView2 gets a callback called for the drop action with ItemView1 as a parameter. It calls ContainerPresenterB passing it ItemViewB In this case we are only dealing with views. In MVP-PV, views aren't supposed to know anything about the presenter nor the model, right ? How can I create the ItemView2 from the ItemView1, not knowing which model object is ItemView1 representing ? I thought about adding an "itemId" to every view, this id being the id of the core object the view represents. So in pseudo code, ContainerPresenter2 would do something like itemView2=abstractWidgetFactory.createItemView2(); this.add(itemView2,itemView1.getCoreObjectId()) I don't get too much into details. That just work. The problem I have here is that those itemIds are just like pointers. And pointers can be dangling. Imagine that by mistake, I delete itemView1, and this deletes coreObject1. The itemView2 will have a coreObjectId which represents an invalid coreObject. Isn't there a more elegant and "bulletproof" solution ? Even though I never did ObjectiveC or macOSX programming, I couldn't help but notice that our framework is very similar to Cocoa framework. How do they deal with this kind of problem ? Couldn't find more in-depth information about that on google. If someone could shed some light on this. I hope this question isn't too confusing ...

  Read the article

• Oracle Announces Availability of Oracle Exaskeleton with Extreme Scale

  - by J Swaroop

  Re-posting Bruce Tierney's original post - albeit a day late: I reckon this is Oracle's most interesting launch this year. Enjoy! The World’s First Human Scale Body Surface (HSBS) Designed to Toughen Spineless Wimps April 1, 2012 Building on the success of Oracle Exalogic, Oracle Exadata, and Oracle Exalytics, Oracle today announced the general availability of Oracle Exaskeleton, toughening up spineless wimps across the globe through the introduction of extreme scalability over the human body leveraging a revolutionary new technology called Human Scale Body Surface (HSBS). First Customer Ship (FCS) was received by the little known and mostly unsuccessful superhero Awkwardman. After applying Oracle Exaskeleton with extreme scale, he has since rebranded himself as Aquaman. Said Aquaman, “I used to feel so helpless in my skin…now I feel like…well…a highly scaled Engineered System thanks to Oracle!” Thousand of meek and mild individuals eagerly lined up outside Oracle Corporation’s Redwood Shores office to purchase the new Oracle Exaskeleton, with the hope of finally gaining the spine they never had. Unfortunately for the individuals, a bully was spotted allegedly kicking the sand covering the beaches of Redwood Shores into the still spineless Exaskeleton hopefuls. Supporting Quotes “Industry analysts are inquiring if Oracle Exaskeleton is a radical departure from Oracle’s traditional enterprise focus into new markets”, said Oracle representative Sabrina Twich, “Oracle has extensive expertise in unified backbone solutions for application infrastructures…this is simply a new port to the human body combining our Business Intelligence (BI) and RDBC (Remote Direct Brain Cell) technologies.” “With this release of Oracle Exaskeleton, Oracle has redefined scalability. Software and hardware vendors had it all wrong” said the Director of Oracle Exaskeleton, “Scalability for hardware is like…um…you know…so scale-ful. No, wait…can I say that again? I didn’t get that right…Scalability is hardware-on-demand with public and private…hybrid clouds, no…<long pause>…Scalability for… nevermind, I don’t want to be in this stupid press release anyway” Releases An upcoming Oracle Exaskeleton service pack release will include a new datasheet with an extensive library of three-letter acronyms (TLAs) as well as the introduction of more four-letter acronyms (FLAs) since technologies vendors have used up almost all of the 17,576 TLA permutations (TLAPs). About Oracle Oracle engineers hardware and software to work together in the cloud and in your data center. It would be an amazing coincidence if any of this is true in some secret Oracle lab, but I doubt it. Trademarks Really…you’re still reading this? Cool! Aquaman - First Customer Ship (FCS) - Oracle Exaskeleton

  Read the article

• Code refactoring with Visual Studio 2010 Part-1

  - by Jalpesh P. Vadgama

  Visual studio 2010 is a Great IDE(Integrated Development Environment) and we all are using it in day by day for our coding purpose. There are many great features provided by Visual Studio 2010 and Today I am going to show one of great feature called for code refactoring. This feature is one of the most unappreciated features of Visual Studio 2010 as lots of people still not using that and doing stuff manfully. So to explain feature let’s create a simple console application which will print first name and last name like following. And following is code for that. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Console.WriteLine(string.Format("FirstName:{0}",firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So as you can see this is a very basic console application and let’s run it to see output. So now lets explore our first feature called extract method in visual studio you can also do that via refractor menu like following. Just select the code for which you want to extract method and then click refractor menu and then click extract method. Now I am selecting three lines of code and clicking on refactor –> Extract Method just like following. Once you click menu a dialog box will appear like following. As you can I have highlighted two thing first is Method Name where I put Print as Method Name and another one Preview method signature where its smart enough to extract parameter also as We have just selected three lines with  console.writeline.  One you click ok it will extract the method and you code will be like this. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Print(firstName, lastName); } private static void Print(string firstName, string lastName) { Console.WriteLine(string.Format("FirstName:{0}", firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So as you can see in above code its has created a static method called Print and also passed parameter for as firstname and lastname. Isn’t that great!!!. It has also created static print method as I am calling it from static void main.  Hope you liked it.. Stay tuned for more..Till that Happy programming.

  Read the article

• Code refactoring with Visual Studio 2010 Part-2

  - by Jalpesh P. Vadgama

  In previous post I have written about Extract Method Code refactoring option. In this post I am going to some other code refactoring features of Visual Studio 2010.  Renaming variables and methods is one of the most difficult task for a developer. Normally we do like this. First we will rename method or variable and then we will find all the references then do remaining over that stuff. This will be become difficult if your variable or method are referenced at so many files and so many place. But once you use refactor menu rename it will be bit Easy. I am going to use same code which I have created in my previous post. I am just once again putting that code here for your reference. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; Print(firstName, lastName); } private static void Print(string firstName, string lastName) { Console.WriteLine(string.Format("FirstName:{0}", firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } Now I want to rename print method in this code. To rename the method you can select method name and then select Refactor-> Rename . Once I selected Print method and then click on rename a dialog box will appear like following. Now I am renaming this Print method to PrintMyName like following.   Now once you click OK a dialog will appear with preview of code like following. It will show preview of code. Now once you click apply. You code will be changed like following. using System; namespace CodeRefractoring { class Program { static void Main(string[] args) { string firstName = "Jalpesh"; string lastName = "Vadgama"; PrintMyName(firstName, lastName); } private static void PrintMyName(string firstName, string lastName) { Console.WriteLine(string.Format("FirstName:{0}", firstName)); Console.WriteLine(string.Format("LastName:{0}", lastName)); Console.ReadLine(); } } } So that’s it. This will work in multiple files also. Hope you liked it.. Stay tuned for more.. Till that Happy Programming.

  Read the article

• Generate DROP statements for all extended properties

  - by jamiet

  This evening I have been attempting to migrate an existing on-premise database to SQL Azure using the wizard that is built-in to SQL Server Management Studio (SSMS). When I did so I received the following error: The following objects are not supported = [MS_Description] = Extended Property Evidently databases containing extended properties can not be migrated using this particular wizard so I set about removing all of the extended properties – unfortunately there were over a thousand of them so I needed a better way than simply deleting each and every one of them manually. I found a couple of resources online that went some way toward this: Drop all extended properties in a MSSQL database by Angelo Hongens Modifying and deleting extended properties by Adam Aspin Unfortunately neither provided a script that exactly suited my needs. Angelo’s covered extended properties on tables and columns however I had other objects that had extended properties on them. Adam’s looked more complete but when I ran it I got an error: Msg 468, Level 16, State 9, Line 78 Cannot resolve the collation conflict between "Latin1_General_100_CS_AS" and "Latin1_General_CI_AS" in the equal to operation. So, both great resources but I wasn’t able to use either on their own to get rid of all of my extended properties. Hence, I combined the excellent work that Angelo and Adam had provided in order to manufacture my own script which did successfully manage to generate calls to sp_dropextendedproperty for all of my extended properties. If you think you might be able to make use of such a script then feel free to download it from https://skydrive.live.com/redir.aspx?cid=550f681dad532637&resid=550F681DAD532637!16707&parid=550F681DAD532637!16706&authkey=!APxPIQCatzC7BQ8. This script will remove extended properties on tables, columns, check constraints, default constraints, views, sprocs, foreign keys, primary keys, table triggers, UDF parameters, sproc parameters, databases, schemas, database files and filegroups. If you have any object types with extended properties on them that are not in that list then consult Adam’s aforementioned article – it should prove very useful. I repeat here the message that I have placed at the top of the script: /* This script will generate calls to sp_dropextendedproperty for every extended property that exists in your database. Actually, a caveat: I don't promise that it will catch each and every extended property that exists, but I'm confident it will catch most of them! It is based on this: http://blog.hongens.nl/2010/02/25/drop-all-extended-properties-in-a-mssql-database/ by Angelo Hongens. Also had lots of help from this: http://www.sqlservercentral.com/articles/Metadata/72609/ by Adam Aspin Adam actually provides a script at that link to do something very similar but when I ran it I got an error: Msg 468, Level 16, State 9, Line 78 Cannot resolve the collation conflict between "Latin1_General_100_CS_AS" and "Latin1_General_CI_AS" in the equal to operation. So I put together this version instead. Use at your own risk. Jamie Thomson 2012-03-25 */ Hope this is useful to someone! @Jamiet

  Read the article

• Silverlight Cream for May 25, 2010 - 2 -- #870

  - by Dave Campbell

  In this Issue: Kirupa, Matthias Shapiro(-2-, -3-), Giorgetti Alessandro, Kunal Chowdhury, Mike Snow, and Jason Zander. Shoutout: This looks like a really nice WP7 app done by a team of folks for Imagine Cup 2010: Ahead ... I hope to see some blog posts and code on this! From SilverlightCream.com, and remember you can send me a link to your post or submit at SilverlightCream.com: Control Storyboards Easily using Behaviors Kirupa is following through on a promise to discuss the Behaviors that come on-board Blend. He's starting with two to help deal with Storyboards: ControlStoryboardAction and the StoryboardCompletedTrigger. PHP, MySQL and Silverlight: The Complete Tutorial (Part 1) Matthias Shapiro has a 3-parter up on PHP, MySQL, and Silverlight -- wondered how I missed this first one until I realized they all posted in 2 days... this first post sets up the MySQL database to be used. PHP, MySQL, and Silverlight: The Complete Tutorial (Part 2) In part 2, Matthias Shapiro writes a PHP web service that grabs the data from the database and sends it in JSON format to the Silverlight app (see part 3). PHP, MySQL, and Silverlight: The Complete Tutorial (Part 3) Matthias Shapiro's part 3 is the Silverlight part that reads the JSON produced by the PHP webservice from Part 2, to provide display and edits of the data... and this whole series includes source. Silverlight: adding an IsEditing property to the DataForm Giorgetti Alessandro laments the lack of an IsEditing property in the DataForm, then goes on to demonstrate his path to a suitable workaround. Step-by-Step Command Binding in Silverlight 4 Kunal Chowdhury has a nicely-detailed post on Command Binding in Silverlight 4 and builds up a demo MVVM app in the process... source project included. Silverlight Tip of the Day #24 – Resolving Unknown Objects in VS I'm not sure I would call Mike Snow's latest Silverlight Tip 'Silverlight' ... but if you don't know it, you need to. Sample: Windows Phone 7 Example Application with Landscape Layout Whoa... check out the WP7 app Jason Zander did with landscape mode defined... you're going to want to refer back to this one... Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• JCP EC Nominations and Meet the Candidates Call

  - by heathervc

  The Nominations period for the 2012 JCP EC Elections closes tomorrow, 11 October at midnight pacific time.  Eligible JCP Members (all current JSPA 2 signers) may nominate themselves.  You will need your Elections credentials to complete the nomination, which were sent to the primary contacts of all eligible JCP Members via email last week. This year all ratified (there are 4 proposed ratified candidates) and elected (there are 7 candidates so far) will appear on one ballot; the top 2 candidates will win elected seats. This year, the selected EC Members will serve a single year term.  Following the 2012 Elections, there will be one merged EC (approved through JSR 355), and a new JCP version, JCP 2.9 will be in effect.  In 2013, all EC members will stand for election to complete the merge process described in the JCP 2.9 process document. All of the candidates' nominations materials are now available. The ratified candidates are:  Cinterion, Credit Suisse, Fujitsu and HP.The elected candidates are:  Cisco Systems, CloudBees, Giuseppe Dell'Abate, London Java Community, MoroccoJUG, Software AG, and Zero Turnaround. Next week, 18 October, we will hold an open teleconference for the Java Community to meet the candidates and ask questions regarding their nomination.  We hope you will be able to participate in the call.  Should the time be inconvenient, a recording will be made available for download, and candidate questions may be posted on this blog entry or sent to [email protected]. Topic: Meet the EC Candidates Date: Thursday, October 18, 2012 Time: 9:30 am, Pacific Daylight Time (San Francisco, GMT-07:00) Meeting Number: 807 818 225 Meeting Password: MeetEC ------------------------------------------------------- To join the online meeting (Now from mobile devices) ------------------------------------------------------- 1. Go to https://jcp.webex.com/jcp/j.php?ED=186721592&UID=0&PW=NMmUzNjY5ZTMw&RT=MiM0 2. If requested, enter your name and email address. 3. If a password is required, enter the meeting password: MeetEC 4. Click "Join". To view in other time zones or languages, please click the link: https://jcp.webex.com/jcp/j.php?ED=186721592&UID=0&PW=NMmUzNjY5ZTMw&ORT=MiM0 ------------------------------------------------------- To join the audio conference only -------------------------------------------------------     +1 (866) 682-4770     Outside the US: global access numbers  https://www.intercallonline.com/portlets/scheduling/viewNumbers/listNumbersByCode.do?confCode=6279803 or +1 (408) 774-4073     Conference code: 9454597     Security code: JCPEC (52732)------------------------------------------------------- For assistance ------------------------------------------------------- 1. Go to https://jcp.webex.com/jcp/mc 2. On the left navigation bar, click "Support".

  Read the article

• How do I keep my Huawei E3131 3G modem from unmounting?

  - by John Perez

  I need help getting my Huawei E3131 modem to (consistently) work. I am currently running Ubuntu 12.04.2 and 3G dongles have worked many times before. However, my newly acquired Huawei E3131 is causing problems. When plugged in, Ubuntu detects the device as a CD-ROM and a modem. I can browse the dongle's contents using Nautilus and Network Manager is able to configure and work the dongle out-of-the-box. I can even get to surf. However, within minutes, the connection drops and the CD-ROM is unmounted. I wait about 15 seconds, then the CD-ROM mounts again and Network Manager is able to connect again with short-lived surfing. Rinse, lather and repeat. It's strange that the device mounts as a CD-ROM, but works as a modem, too, suggesting that mode switching happens somewhere. It's not a signal coverage problem, either because I tested the same SIM card using 3 other different dongles (2 ZTEs and another Huawei) and it is only this E3131 that has this problem. If pertinent, the other dongles weren't being detected as CD-ROMs. Output of lsusb Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0ac8:c342 Z-Star Microelectronics Corp. Bus 001 Device 010: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard Bus 001 Device 004: ID 0a5c:219b Broadcom Corp. Bluetooth 2.1 Device I tried installing the drivers found here, but no fish. Furthermore, my device is an E3131, but lsusb for some reason detects it as an E398. I'm not sure how that plays a role for this problem, though. I hope someone out there can help me. I'm out of ideas already. Thank you very much!

  Read the article

• Are You In The Know About Knowledge?

  - by [email protected]

  "Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it." To me, this simple and elegant quote from the great English author Samuel Johnson is a reflection of Oracle's knowledge base strategy. The knowledge base in the My Oracle Support portal (https://support.oracle.com) hosts nearly a half million documents, including how-to instructions, problem-solution descriptions, code samples, FAQs, critical alerts, technical whitepapers, and so on. AutoVue's footprint in the Oracle knowledge base - although relatively small at just around 400 documents - is a steadily-expanding assortment of valuable info. This information is designed to complement what you have already learned from the AutoVue documentation, or in some cases, to examine topics not yet covered in the documentation. Similar to the documentation, the knowledge base is one of the highest-value self-service avenues, since it delivers answers in real-time and is driven by the topics most relevant to customers. There are many different ways to leverage the AutoVue knowledge content, or what Oracle often refers to as "KM Notes": 1. Knowledge Browser: To browse the knowledge hierarchy, click on the 'Knowledge' tab at the top of the My Oracle Support webpage. In the list of product areas at the left, click on 'More Applications', then on 'Oracle AutoVue'. From here, you can either view the full set of KM Notes under the AutoVue product family (AutoVue, VueLink, Web Services, Document Print Services, etc) by clicking on 'All of Oracle AutoVue', or you can drill down further by clicking on 'Enterprise Visualization'. 2. Search: To execute simple keyword searches, use the Search bar at the top-right of the My Oracle Support webpage: 3. Advanced Search: Beside the same Search bar at the top-right of the My Oracle Support webpage, click on the 'Advanced' link in order to increase your control over the search string as well as the product to search against: 4. In your Dashboard: By clicking on the 'Customize' link at the top-right of the Dashboard page in My Oracle Support, you can drag & drop multiple "Knowledge Articles" widgets onto your dashboard. Then, click on the pencil icon at the top-right of the widget to customize it by product. This allows you to keep an active monitor on the most recently updated KM Notes across any product: 5. During SR Creation: As you submit a new Service Request, after entering the product information, SR title, and SR description, you will be presented with a frame at the left containing KM Note suggestions based on the information entered: Let Oracle know what you think! If you like or dislike an article, or would like to comment on how easy/difficult it was to find the article, click on the "Rate this document" link at the bottom of the KM Note. Similarly, during SR creation if one of the suggested KM Notes resolves your question/issue, you can click the "This article solved my problem" link at the bottom of the page. I hope these approaches improve your ability find knowledge content within the My Oracle Support portal, and I encourage you to continue to build your knowledge to further your success with the AutoVue product family.

  Read the article

• How to pad number with leading zero with C#

  - by Jalpesh P. Vadgama

  Recently I was working with a project where I was in need to format a number in such a way which can apply leading zero for particular format.  So after doing such R and D I have found a great way to apply this leading zero format. I was having need that I need to pad number in 5 digit format. So following is a table in which format I need my leading zero format. 1-> 00001 20->00020 300->00300 4000->04000 50000->5000 So in the above example you can see that 1 will become 00001 and 20 will become 00200 format so on. So to display an integer value in decimal format I have applied interger.Tostring(String) method where I have passed “Dn” as the value of the format parameter, where n represents the minimum length of the string. So if we pass 5 it will have padding up to 5 digits. So let’s create a simple console application and see how its works. Following is a code for that. using System; namespace LeadingZero { class Program { static void Main(string[] args) { int a = 1; int b = 20; int c = 300; int d = 4000; int e = 50000; Console.WriteLine(string.Format("{0}------>{1}",a,a.ToString("D5"))); Console.WriteLine(string.Format("{0}------>{1}", b, b.ToString("D5"))); Console.WriteLine(string.Format("{0}------>{1}", c, c.ToString("D5"))); Console.WriteLine(string.Format("{0}------>{1}", d, d.ToString("D5"))); Console.WriteLine(string.Format("{0}------>{1}", e, e.ToString("D5"))); Console.ReadKey(); } } } As you can see in the above code I have use string.Format function to display value of integer and after using integer value’s  ToString method. Now Let’s run the console application and following is the output as expected. Here you can see the integer number are converted into the exact output that we requires. That’s it you can see it’s very easy. We have written code in nice clean way and without writing any extra code or loop. Hope you liked it. Stay tuned for more.. Till than happy programming.

  Read the article

• Book &ldquo;Team Foundation Server 2012 Starter&rdquo; published

  - by terje

  During the summer and fall this year, me and my colleague Jakob Ehn has worked together on a book project that has now finally hit the stores! The title of the book is Team Foundation Server 2012 Starter and is published by Packt Publishing. Get it from http://www.packtpub.com/team-foundation-server-2012-starter/book or from Amazon http://www.amazon.com/dp/1849688389                     The book is part of a concept that Packt have with starter-books, intended for people new to Team Foundation Server 2012 and who want a quick guideline to get it up and working.  It covers the fundamentals, from installing and configuring it, and how to use it with source control, work items and builds. It is done as a step-by-step guide, but also includes best practices advice in the different areas. It covers the use of both the on-premises and the TFS Services version. It also has a list of links and references in the end to the most relevant Visual Studio 2012 ALM sites. Our good friend and fellow ALM MVP Mathias Olausson have done the review of the book, thanks again Mathias! We hope the book fills the gap between the different online guide sites and the more advanced books that are out. Book Description Your quick start guide to TFS 2012, top features, and best practices with hands on examples Overview Install TFS 2012 from scratch Get up and running with your first project Streamline release cycles for maximum productivity In Detail Team Foundation Server 2012 is Microsoft's leading ALM tool, integrating source control, work item and process handling, build automation, and testing. This practical "Team Foundation Server 2012 Starter Guide" will provide you with clear step-by-step exercises covering all major aspects of the product. This is essential reading for anyone wishing to set up, organize, and use TFS server. This hands-on guide looks at the top features in Team Foundation Server 2012, starting with a quick installation guide and then moving into using it for your software development projects. Manage your team projects with Team Explorer, one of the many new features for 2012. Covering all the main features in source control to help you work more efficiently, including tools for branching and merging, we will delve into the Agile Planning Tools for planning your product and sprint backlogs. Learn to set up build automation, allowing your team to become faster, more streamlined, and ultimately more productive with this "Team Foundation Server 2012 Starter Guide". What you will learn from this book Install TFS 2012 on premise Access TFS Services in the cloud Quickly get started with a new project with product backlogs, source control, and build automation Work efficiently with source control using the top features Understand how the tools for branching and merging in TFS 2012 help you isolate work and teams Learn about the existing process templates, such as Visual Studio Scrum 2.0 Manage your product and sprint backlogs using the Agile planning tools Approach This Starter guide is a short, sharp introduction to Team Foundation Server 2012, covering everything you need to get up and running. Who this book is written for If you are a developer, project lead, tester, or IT administrator working with Team Foundation Server 2012 this guide will get you up to speed quickly and with minimal effort.

  Read the article

• Kickstarter "last minute cold feet"

  - by mm24

  today I scheduled the publication of a video on kickstarter requesting approximately 5.000 $ in order to complete the iPhone shooter game I started 1 year ago after quitting my job. I invested more than 20.000$ in the game so far (for artwork, music, legal and accountant expenses) and I am now getting cold feet about my decision of publishing the video. The game is "nearly finished", in other words: the game mechanics are working but I still have some bugs to fix. Once I will have finished this (I hope will take me 1 or 2 weeks) I plan to start working on the actual level balancing (e.g. deciding the order of appearence of enemies for each level and balancing the number of hitpoints and strenght of bullets that the enemies have). Reasons for not publishing the video are: fear that the concept can be copied easily: the game is a shooter game set in a different environment (its a pretty cool one, believe me :)) and I am worried that someone might copy* the idea (I know, its the usual "I am worried story.."). A shooter game is one of the easiest game to implement and hence there will be hundreds game developer able to copy it by just adapting their existing code and changing graphics (not as straightforward). It took me one year to develop this because I was inexperienced plus there are approximately 6/7 months of work from the illustrator and there are 8 unique music tracks composed. The soundtrack of the video is the soundtrack of the game wich is not yet published and has not been deposited to a music society. I did create legally valid timestamps for the tracks and I am considering uploading the album on iTunes before publishing the video so I can have a certain publication date. But overall I am a bit scared and worried because I have never done this before and even the simple act of publishing an album requires me to read a long contract from the "aggregator company") which, even if I do have contracts with the musicians do worry me as I am not a U.S. resident and I am not familiar with the U.S. law system Reasons for publishing the video are: I almost run out of money (but this is not a real reason as I should have enough for one more month of development time) ...I kind of need extra money as, even if I do have money for 1 month of development I do not have money for marketing and for other expenses (e.g. accountant) It will create a fan base I could get some useful feedback from a wider range of beta testers It might create some pre-release buzz in case some blogger or game magazine likes the concept Anyone has had similar experiences? Is there a real risk that someone will copy the concept and implement it in a couple of months? Will the Kickstarter campaing be a good pre-release exposure for the gmae? Any refrences of similar projects/situations? Is it realistic that someone like ROVIO will copy the idea straight away?

  Read the article

• Create Image Maps with GIMP

  - by SGWellens

  Having a clickable image in a web page is not a big deal. Having an image in a web page with clickable hotspots is a big deal. The powerful GIMP editor has a tool to make creating clickable hotspots much easier. GIMP stands for GNU Image Manipulation Program. Its home page and download links are here: http://www.gimp.org/ (it is completely free). Beware: GIMP is an extraordinarily advanced and powerful image editor. If you wish to use it for general image editing tasks, you have a steep learning curve to climb. FYI: I used it to create the shadows you see on the images below. Fortunately, the tool to make Image Maps is separate from the main program. To start, open an image with GIMP or, drag and drop an image onto the GIMP main window. I'm using the image of a bar graph. Next, we have to find the Image Map tool and launch it (Filters->Web->Image Map…): Why is the Image Map tool under Filters and not Tools? I don't know. It's mystery—much like the Loch Ness Monster, the Bermuda Triangle, or why my socks keep disappearing when I do laundry. I swear I've got twenty single unmatched socks. But I digress… Here is what the Image Map tool looks like: If we click the blue 'I' button, we can add information to the Image Map: Now we'll use the rectangle tool to create some clickable hotspots. Select the Blue Rectangle tool, drag a rectangle, click when done and you'll get something like this: You can also make circle/oval and polygon areas. You can edit all the parameters of an image map area after drawing it. Rectangle settings (for fine tweaking): JavaScript functions (it's up to you to write them): Here is a setup with two rectangles and one polygon area: When you hit save a map file is generated that looks something like this: Paste the contents into a web page and you are almost there. I made some tweaks before it became usable: Replaced &apos; with apostrophes in the javascript functions. Changed the image path so it would find the image in my images directory Tweaked the href urls. Added Title="Some Text" to get tool tips. Cleaned out the comments. Result: The final markup (with JavaScript function): function ImageMapMouseHover(Msg) { $("#Label1").html(Msg); } It may seem like a lot of bother but, the tool does the heavy lifting: i.e. the coordinates. Getting the regions positioned and sized is easy using a visual tool…much better than doing it by hand. This, of course, isn't a full treatise on the tool but it should give you enough information to decide if it's helpful. I hope someone finds this useful Steve Wellens

  Read the article

• Be Careful When Referencing SPList.Items

  - by Brian Jackett

  Be very careful how you reference your SPListItem objects through the SharePoint API.  I’ll say it again.  Be very careful how you reference your SPListItem objects through the SharePoint API.  Ok, now that you get the point that this will be a “learn from my mistakes and don’t do unsmart things like I did” post, let’s dig into what it was that I did poorly. Scenario     For the past year I’ve been building custom .Net applications that are hosted through SharePoint.  These application involve a number of SharePoint lists, external databases, custom web parts, and other SharePoint elements to provide functionality.  About two weeks ago I received a message from one of our end users that a custom application was performing slowly.  Specifically performance was slow when users were performing actions that interacted with the primary SharePoint list storing data for that app. The Problem     I took a copy of the production site into a dev environment to investigate the code that was executing.  After attaching the debugger and running through the code I quickly found pieces of code referencing SPListItem objects (like below) that were performing very poorly: SPListItem myItem = SPContext.Current.Web.Lists["List Name"].Items.GetItemById(value); // do updates on SPListItem retrieved     As it turns out the SPList I was referencing was fairly large at ~1000 items and weighing in over 150 MB.  You see the problem with my above code is that I retrieved the SPListItem by first (unnecessarily) going through the Items member of the list.  As I understand it, when doing so the executing code will attempt to resolve that entity and pull it from the database and into RAM (all 150 MB.)  This causes the equivalent of a 50 car pile up in terms of performance with a single update taking more than 15 seconds. The Solution     The solution is actually quite simple and I wish I had realized this during development.  Instead of going through the Items member it is possible to call GetItemById(…) directly on the SPList as in the example below: SPListItem myItem = SPContext.Current.Web.Lists["List Name"].GetItemById(value); // do updates on SPListItem retrieved     After making this simple change performance skyrocketed and updates were back to less than a second.   Conclusion     When given the option between two solutions, usually the simplest is the best solution.  In my scenario I was adding extra complexity going through the API the long way around to get to the objects I needed and it ended up hurting performance greatly.  Luckily we were able to find and resolve the performance issue in a relatively short amount of time.  Like I said at the beginning of the post, learn from my mistakes and hope it helps you.         -Frog Out   Image linked from http://www.freespirit.com/files/IMAGE/COVER/LARGE/BeCarefulSafe.jpg

  Read the article

• Oracle Announces Availability of Oracle Exaskeleton with Extreme Scale

  - by Bruce Tierney

  The World’s First Human Scale Body Surface (HSBS) Designed to Toughen Spineless Wimps April 1, 2012 Building on the success of Oracle Exalogic, Oracle Exadata, and Oracle Exalytics, Oracle today announced the general availability of Oracle Exaskeleton, toughening up spineless wimps across the globe through the introduction of extreme scalability over the human body leveraging a revolutionary new technology called Human Scale Body Surface (HSBS). First Customer Ship (FCS) was received by the little known and mostly unsuccessful superhero Awkwardman. After applying Oracle Exaskeleton with extreme scale, he has since rebranded himself as Aquaman. Said Aquaman, “I used to feel so helpless in my skin…now I feel like…well…a highly scaled Engineered System thanks to Oracle!” Thousand of meek and mild individuals eagerly lined up outside Oracle Corporation’s Redwood Shores office to purchase the new Oracle Exaskeleton, with the hope of finally gaining the spine they never had. Unfortunately for the individuals, a bully was spotted allegedly kicking the sand covering the beaches of Redwood Shores into the still spineless Exaskeleton hopefuls. Supporting Quotes “Industry analysts are inquiring if Oracle Exaskeleton is a radical departure from Oracle’s traditional enterprise focus into new markets”, said Oracle representative Sabrina Twich, “Oracle has extensive expertise in unified backbone solutions for application infrastructures…this is simply a new port to the human body combining our Business Intelligence (BI) and RDBC (Remote Direct Brain Cell) technologies.” “With this release of Oracle Exaskeleton, Oracle has redefined scalability. Software and hardware vendors had it all wrong” said the Director of Oracle Exaskeleton, “Scalability for hardware is like…um…you know…so scale-ful. No, wait…can I say that again? I didn’t get that right…Scalability is hardware-on-demand with public and private…hybrid clouds, no…<long pause>…Scalability for… nevermind, I don’t want to be in this stupid press release anyway” Releases An upcoming Oracle Exaskeleton service pack release will include a new datasheet with an extensive library of three-letter acronyms (TLAs) as well as the introduction of more four-letter acronyms (FLAs) since technologies vendors have used up almost all of the 17,576 TLA permutations (TLAPs). About Oracle Oracle engineers hardware and software to work together in the cloud and in your data center. It would be an amazing coincidence if any of this is true in some secret Oracle lab, but I doubt it. Trademarks Really…you’re still reading this? Cool! Aquaman - First Customer Ship (FCS) - Oracle Exaskeleton

  Read the article

• Refreshing imported MySQL data with MySQL for Excel

  - by Javier Rivera

  Welcome to another blog post from the MySQL for Excel Team. Today we're going to talk about a new feature included since MySQL for Excel 1.3.0, you can install the latest GA or maintenance version using the MySQL Installer or optionally you can download directly any GA or non-GA version from the MySQL Developer Zone.As some users suggested in our forums we should be maintaining the link between tables and Excel not only when editing data through the Edit MySQL Data option, but also when importing data via Import MySQL Data. Before 1.3.0 this process only provided you with an offline copy of the Table's data into Excel and you had no way to refresh that information from the DB later on. Now, with this new feature we'll show you how easy is to work with the latest available information at all times. This feature is transparent to you (it doesn't require additional steps to work as long as the users had the Create an Excel Table for the imported MySQL table data option enabled. To ensure you have this option checked, click over Advanced Options... after the Import Data dialog is displayed). The current blog post assumes you already know how to import data into excel, you could always take a look at our previous post How To - Guide to Importing Data from a MySQL Database to Excel using MySQL for Excel if you need further reference on that topic. After importing Data from a MySQL Table into Excel, you can refresh the data in 3 ways.1. Simply right click over the range of the imported data, to show the pop-up menu: Click over the Refresh button to obtain the latest copy of the data in the table. 2. Click the Refresh button on the Data ribbon: 3. Click the Refresh All button in the Data ribbon (beware this will refresh all Excel tables in the Workbook): Please take a note of a couple of details here, the first one is about the size of the table. If by the time you refresh the table new columns had been added to it, and you originally have imported all columns, the table will grow to the right. The same applies to rows, if the table has new rows and you did not limit the results , the table will grow to to the bottom of the sheet in Excel. The second detail you should take into account is this operation will overwrite any changes done to the cells after the table was originally imported or previously refreshed: Now with this new feature, imported data remains linked to the data source and is available to be updated at all times. It empowers the user to always be able to work with the latest version of the imported MySQL data. We hope you like this this new feature and give it a try! Remember that your feedback is very important for us, so drop us a message with your comments, suggestions for this or other features and follow us at our social media channels: MySQL on Windows (this) Blog: https://blogs.oracle.com/MySqlOnWindows/ MySQL for Excel forum: http://forums.mysql.com/list.php?172 Facebook: http://www.facebook.com/mysql YouTube channel: https://www.youtube.com/user/MySQLChannel Thanks!

  Read the article

• Auto Mocking using JustMock

  - by mehfuzh

  Auto mocking containers are designed to reduce the friction of keeping unit test beds in sync with the code being tested as systems are updated and evolve over time. This is one sentence how you define auto mocking. Of course this is a more or less formal. In a more informal way auto mocking containers are nothing but a tool to keep your tests synced so that you don’t have to go back and change tests every time you add a new dependency to your SUT or System Under Test. In Q3 2012 JustMock is shipped with built in auto mocking container. This will help developers to have all the existing fun they are having with JustMock plus they can now mock object with dependencies in a more elegant way and without needing to do the homework of managing the graph. If you are not familiar with auto mocking then I won't go ahead and educate you rather ask you to do so from contents that is already made available out there from community as this is way beyond the scope of this post. Moving forward, getting started with Justmock auto mocking is pretty simple. First, I have to reference Telerik.JustMock.Container.DLL from the installation folder along with Telerik.JustMock.DLL (of course) that it uses internally and next I will write my tests with mocking container. It's that simple! In this post first I will mock the target with dependencies using current method and going forward do the same with auto mocking container. In short the sample is all about a report builder that will go through all the existing reports, send email and log any exception in that process. This is somewhat my  report builder class looks like: Reporter class depends on the following interfaces: IReporBuilder: used to  create and get the available reports IReportSender: used to send the reports ILogger: used to log any exception. Now, if I just write the test without using an auto mocking container it might end up something like this: Now, it looks fine. However, the only issue is that I am creating the mock of each dependency that is sort of a grunt work and if you have ever changing list of dependencies then it becomes really hard to keep the tests in sync. The typical example is your ASP.NET MVC controller where the number of service dependencies grows along with the project. The same test if written with auto mocking container would look like: Here few things to observe: I didn't created mock for each dependencies There is no extra step creating the Reporter class and sending in the dependencies Since ILogger is not required for the purpose of this test therefore I can be completely ignorant of it. How cool is that ? Auto mocking in JustMock is just released and we also want to extend it even further using profiler that will let me resolve not just interfaces but concrete classes as well. But that of course starts the debate of code smell vs. working with legacy code. Feel free to send in your expert opinion in that regard using one of telerik’s official channels. Hope that helps

  Read the article

• Graphics card fan is loud (additional graphics card drivers cause problems)

  - by tk4muffin

  Okay this explanation is a bit longer ... but I start at the beginning: I've been using Windows 7 for a very long time, shortly after the release of v12.10 I installed Ubuntu via Windows installer. Everything worked fine but the fan of the graphics card. After a bit of research I found out, that I just had to select a different driver (nvidia-current (proprietary, tested) worked pretty well). This also fixed some graphical bugs when I just logged into my account. Due to my university I got a MSDNAA-Account (allows me to download every Windows OS for free). I downloaded and installed Windows 8. After configuration I installed ubuntu via the Windows installer once again and the first couple launches of ubuntu went well. Suddenly ubuntu didn't launched anymore...caused by some hard-disk errors and had no clue what to do. So I kept working on Windows 8 - unfortunately. After playing around with the new Windows, I put my PC to sleep-mode. I couldn't wake my PC up and it wasn't responding to anything (neither mouse-movement, -clicks or keyboard strokes, nor the power-button and the reset-button worked), so I pulled the plug. Turns out, this was a huge mistake. Somehow the BIOS broke and after restarting a couple of times, the BIOS repaired itself. Neither Windows 8, nor ubuntu where bootable. Now I had to install ubuntu several times, because after rebooting unity was hidden and I didn't know what the problem was and how to fix it. I finally realized that this problem was caused by the graphics card driver, which I've changed to the nvidia-current (This dirver worked fine before my PC "crashed"). So I installed Windows 8 again and after a bit of usage I installed ubuntu once again (via DVD). The booting of ubuntu and windows works fine - so far. But I'm still not able to change the graphics card driver without unity hiding away after restarting the OS. The noisy fan is really disturbing my work... PC Specs: Processor: Intel Core 2 Duo COU E8400 @ 3GHz x2 Memory: 7.8 GB OS type: 64-bit Graphics Card: GeForce 9600 GT Motherboard: Asus P5Q I hope the information given are enough.

  Read the article

• Problem booting Windows after failed installation Ubuntu 12.04 alongside Windows 7

  - by Tassos

  I tried to install in my laptop Ubuntu 12.04 so that I can dual-boot with Windows 7. I made some mistakes during this process and I didn't manage to install Ubuntu. But my real problem now is that I'm afraid that I also destroyed the installation of Windows 7. Your help would be precious for me. Here are the details of what I did: 1) I followed these instructions to dual boot Ubuntu 12.04 and Windows 7: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ The only difference from what is described above, is that in my case the device names where: /dev/mapper/isw_fdjdhbadc_Volume0* instead of: /dev/sda* Note that I had created a bootable USB stick to do that. 2) The installation proceeded normally, but in the end I got a fatal error because the grub-install failed. 3) Then, after googling this problem, I runned ubuntu from the USB stick and run this command: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0p5 (/isw_fdjdhbadc_Volume0p5 was the partition that I had made for /boot) but this command also failed. 4) Then, I did something stupid (I think): I run the above command as: sudo grub-install --root-directory=/home/ubuntu/temp /dev/mapper/isw_fdjdhbadc_Volume0 namely I tried to install grub in the device isw_fdjdhbadc_Volume0 instead of the boot partition isw_fdjdhbadc_Volume0p5 The above command did not fail and was executed ok. 5) After that, I tried to boot my laptop, but it seemed that I had no operation system. Not even windows were detected. 6) I thought that I should uninstall grub from isw_fdjdhbadc_Volume0. So following some online instructions that I found, I booted again Ubuntu from the USB stick and run the following command (this was stupid since the instructions were for a totally different case than mine): sudo dd if=/dev/zero of=/dev/mapper/isw_fdjdhbadc_Volume0 bs=446 count=1 Afte that, I was still unable to boot Windows. I realize that I deleted something that I shouldn't, but I'm hope that this is not crucial and I can recover somehow. When I boot Ubuntu from the USB, I can see that the partition with Windows is still there, with all the directories, Windows files, my data etc. So, my question is: Is there a way to undo the mistakes that I desribed above and recover Windows 7? This is my major question. After solving that, I'd also like to know what I did wrong with the installation of Ubuntu. Thanks in advance for you valuable help!

  Read the article

• Oracle Optimized Solutions at Oracle OpenWorld 2012

  - by ferhatSF

  Have you registered for Oracle OpenWorld 2012 in San Francisco from September 30 to October 4? Visit the Oracle OpenWorld 2012 site today for registration and more information. Come join us to hear how Oracle Optimized Solutions can help you save money, reduce integration risks, and improve user productivity. Oracle Optimized Solutions are designed, pre-tested, tuned and fully documented architectures for optimal performance and availability. They provide written guidelines to help size, configure, purchase and deploy enterprise solutions that address common IT problems. Built with flexibility in mind, Oracle Optimized Solutions can be deployed as complete solutions or easily tailored to meet your specific needs - they are proven to save money, reduce integration risks and improve user productivity. Here is a preview of the planned Oracle OpenWorld sessions(*) on Oracle Optimized Solutions. October 1, 2012 Monday Time Session ID Title Location 12:15 PM CON7916 Accelerate Oracle E-Business Suite Deployment with SPARC SuperCluster Moscone West - 2001 03:15 PM GEN9691 General Session: Accelerate Your Business with the Oracle Hardware Advantage Moscone North - Hall D 04:45 PM CON4821 Building a Flexible Enterprise Cloud Infrastructure on Oracle SPARC Systems Moscone West - 2001 October 2, 2012 Tuesday Time Session ID Title Location 10:15 AM CON4561 Backup-and-Recovery Best Practices with Oracle Engineered Systems Products Moscone South - 252 11:45 AM CON3851 Optimizing JD Edwards EnterpriseOne on SPARC T4 Servers for Best Performance Moscone West - 2000 01:15 PM GEN11472 General Session: Breakthrough Efficiency in Private Cloud Infrastructure Moscone West - 3014 01:15 PM CON4600 Extreme Storage Scale and Efficiency: Lessons from a 100,000-Person Organization Moscone South - 252 05:00 PM CON9465 Next-Generation Directory: Oracle Unified Directory Moscone West - 3008 05:00 PM CON4088 Accelerate Your SAP Landscape with the Oracle SPARC SuperCluster Moscone West - 2001 05:00 PM CON7743 High-Performance Security for Oracle Applications Using SPARC T4 Systems Moscone West - 2000 05:00 PM CON3857 Archive Strategies for 100 Percent Data Availability Moscone South - 270 October 3, 2012 Wednesday Time Session ID Title Location 10:15 AM CON6528 Configure Oracle Hybrid Columnar Compression to Optimize Query Database Performance up to 10x Moscone South - 252 11:45 AM CON2590 Breakthrough in Private Cloud Management on SPARC T-Series Servers Moscone South - 270 01:15 PM CON4289 Oracle Optimized Solution for Siebel CRM at ACCOR Moscone West - 2000 05:00 PM CON7570 Improve PeopleSoft HCM Performance and Reliability with SPARC SuperCluster Moscone South - 252 * Schedule subject to change In addition, there will be Oracle Optimized Solutions Hands-On-Labs sessions planned. Please enroll ahead of time as space is limited: Oracle Optimized Solutions: Hands on Labs in Oracle OpenWorld Place: Marriott Marquis - Salon 14/15 Date and Time Session ID Title Monday October 1, 2012 01:45 PM HOL9868 Enterprise Cloud Infrastructure for SPARC with Oracle Enterprise Manager Ops Center 12c Monday October 1, 2012 03:15 PM HOL9907 Oracle Virtual Desktop Infrastructure Performance and Tablet Mobility Wednesday October 3, 2012 05:00 PM HOL9870 x86 Enterprise Cloud Infrastructure with Oracle VM 3.x and Sun ZFS Storage Appliance Thursday October 4, 2012 11:15 AM HOL9869 0 to Database Backup and Recovery in 60 Minutes Oracle Optimized Solutions executives and experts will also be at hand for discussions and follow ups. And don’t forget to catch live demonstrations of our complete Oracle Optimized Solutions while at Oracle OpenWorld 2012 in San Francisco. We recommend the use of the Schedule Builder tool to plan your visit to the conference and for pre-enrollment in sessions of your interest. We hope to see you there!

  Read the article

• Why is a fully transparent pixel still rendered?

  - by Mr Bell

  I am trying to make a pixel shader that achieves an effect similar to this video http://www.youtube.com/watch?v=f1uZvurrhig&feature=related My basic idea is render the scene to a temp render target then Render the previously rendered image with a slight fade on to another temp render target Draw the current scene on top of that Draw the results on to a render target that persists between draws Draw the results on to the screen But I am having problems with the fading portion. If I have my pixel shader return a color with its A component set to 0, shouldn't that basically amount to drawing nothing? (Assuming that sprite batch blend mode is set to AlphaBlend) To test this I have my pixel shader return a transparent red color. Instead of nothing being drawn, it draws a partially transparent red box. I hope that my question makes sense, but if it doesnt please ask me to clarify Here is the drawing code public override void Draw(GameTime gameTime) { GraphicsDevice.SamplerStates[1] = SamplerState.PointWrap; drawImageOnClearedRenderTarget(presentationTarget, tempRenderTarget, fadeEffect); drawImageOnRenderTarget(sceneRenderTarget, tempRenderTarget); drawImageOnClearedRenderTarget(tempRenderTarget, presentationTarget); GraphicsDevice.SetRenderTarget(null); drawImage(backgroundTexture); drawImage(presentationTarget); base.Draw(gameTime); } private void drawImage(Texture2D image, Effect effect = null) { spriteBatch.Begin(0, BlendState.AlphaBlend, SamplerState.PointWrap, null, null, effect); spriteBatch.Draw(image, new Rectangle(0, 0, width, height), Color.White); spriteBatch.End(); } private void drawImageOnRenderTarget(Texture2D image, RenderTarget2D target, Effect effect = null) { GraphicsDevice.SetRenderTarget(target); drawImage(image, effect); } private void drawImageOnClearedRenderTarget(Texture2D image, RenderTarget2D target, Effect effect = null) { GraphicsDevice.SetRenderTarget(target); GraphicsDevice.Clear(Color.Transparent); drawImage(image, effect); } Here is the fade pixel shader sampler TextureSampler : register(s0); float4 PixelShaderFunction(float2 texCoord : TEXCOORD0) : COLOR0 { float4 c = 0; c = tex2D(TextureSampler, texCoord); //c.a = clamp(c.a - 0.05, 0, 1); c.r = 1; c.g = 0; c.b = 0; c.a = 0; return c; } technique Fade { pass Pass1 { PixelShader = compile ps_2_0 PixelShaderFunction(); } }

  Read the article

< Previous Page | 154 155 156 157 158 159 160 161 162 163 164 165  | Next Page >