Search Results

Search found 7114 results on 285 pages for 'hope'.

Page 162/285 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• How to fix 'grub error file not found' when installing 12.04?

  - by Tomasz Grabowski

  i'm trying to install Ubuntu. I don't know if it is important, but i'm trying to install it on external HDD. In the end i have external bootable HDD which only displays: error: file not found grub recovery> From the beginning: I've downloaded ubuntu-12.04-desktop-i386.iso I've used LiLi USB Creator (LinuxLive) to create bootable pendrive from that image I've bootet from it, it works I've clicked "Try ubuntu", it works too. I've used GParted to look over drivers (disks) My primary embedded disk is seen as /dev/sda My attached external disk as /dev/sdb My PenDrive as /dev/sdc I've created partitions on /dev/sdb Fist partition for system (over 200GiB) Second was there already (it's xsf, and i don't want to touch it :P) Third is extended partition, with 1 locital partiton (10GiB) for swap I've started installation i've choose "somethin else" in ... i belive secound screeb then is selected /dev/sdb as boot disk for first partiton of /dev/sdb i set i want ext3 file system, i've check "formattin" checkbox, and mount path set to "/" firs logical partiton set as swap partition After installation finished, i restarted my computer. When i boot from my primary disc it's work ok, my previous operating system - vista - works ok. When i set my BIOS to boot from my external disc, i only get that message: error: file not found grub recovery> I've try to reinstall it, but didn't help... In desperation, i've try to read a bit about that "grub recovery" command-line and experiment a bit... I'm not sure if this has had any point, or if it give you some information (notice, that i don't know what i'm doing :P ) when i've type command: insmod (hd1,1)/boot/grub/linux.mod i've get message: unknown filesystem the same with: insmod (hd1,msdos1)/boot/grub/linux.mod the same with: insmod ext3 but i get no message after command: insmod ext2 ... notice that i really don't know what this command exactly do, but than i thought that maybe if i reinstall ubuntu with ext2 filesystem, it will work. I've done that, but symptoms are the same. I've go back to that Live version of ubuntu, filesystem and basics directories seems to be present on /dev/sdb1 ... i'm completely unfamiliar with GRUB. I'm also don't know which wersion of GRUB it is, i hope there is only one version on ubuntu-12.04-desktop-i386.iso Any help? Thax

  Read the article

• You're Invited to a TEAM Informatics Webinar

  - by Christie Flanagan

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following is a guest post by Wayne Boerger, Product Manager at TEAM Informatics, an Oracle partner. TEAM Informatics is a key Oracle partner in the WebCenter space. For the last 13 years, we have been constantly focused on adding value to your Oracle WebCenter investment and most recently, customers have been asking how they can take advantage of the Web Experience Management capabilities in WebCenter Sites.  TEAM is happy to announce the WebCenter Sites Connector, which allows you to continue to use WebCenter Content as your strategic enterprise repository for unstructured content while also using that content within the WebCenter Sites delivery model.  Taking advantage of both best-of-breed tools will supercharge your web marketing and streamline your workflow for getting you there.On Tuesday, March 27, TEAM is hosting a webinar to provide more details about why it’s a great time to move forward with WebCenter Sites and TEAM’s WebCenter Sites Connector.  Choose from one of two sessions to fit your schedule.  Hope to see you there!!Session 1 – March 27, 10 AM CDT/8 AM PDT – Register HERE.Session 2 – March 27, 5 PM CDT/ 3 PM PDT – Register HERE.

  Read the article

• Mobile Shopping Alerts

  - by David Dorf

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} It’s been popular to offer coupons when people check-in to a store, because you’re catching them at the best possible time – they’re presumably in a shopping state-of-mind, and they’re at your store.  But wouldn’t it be even better to catch the people walking by your store and entice them to visit?  That’s the concept of geo-fences.  When people enter a geographic zone, they are sent a relevant text message alerting them about something nearby. I wrote about Placecast doing this for The North Face, noting that the messages were a unique combination of both offers and useful information about outdoor activities. After creating a program with European carrier O2, Placecast recently entered into an agreement to provide similar services to AT&T customers.  The ShopAlerts program allows AT&T customers in Chicago, Los Angeles, New York City, and San Francisco opt-in to receive these messages.  The program will be expanded nationwide as early as this summer. It’s a much better model for customers (and Placecast) to sign-up once with the carrier instead of each individual retailer, but I hope the messages aren’t restricted to advertising.  I really the like the idea of providing other information, such as nearby special events, races, and perhaps even things to avoid like construction.

  Read the article

• ADF Mobile @ Oracle Open World 2012 - A Look Back...

  - by Joe Huang

  Hi, everyone: It's been a little over two weeks since the end of Oracle Open World 2012, and hope everyone has recovered sufficiently.  We have seen a tremendous amount of coverage on Oracle ADF Mobile during this Oracle Open World.  For starters, ADF Mobile demo booth was positioned in the Oracle Red Lounge in Moscone North, where all new and innovative technologies are being demonstrated.  The booth is liternally out front and the first booth in the area, and we had a lot of interested attendees talking to us.  It feels like ADF Mobile has finally arrived on the big stage. There are numerous sessions and hands on labs that covers ADF Mobile.  Details can be found in Oracle Open World page.   The Oracle Cloud: Oracle's Cloud Platofrm and Application Strategy by Thomas Kurian (Keynote) Near the beginning of the keynote, showing a great analytics application built using ADF Mobile  Oracle Fusion Middleware Strategies Driving Business Innovation by Hasan Rizvi (Keynote) The Future of Development for Oracle Fusion—From Desktop to Mobile to Cloud by Chris Tonas (General Session) Co-presented with Accenture, an ADF Mobile Beta Partner Extend Oracle Fusion Apps to Tablets/Smartphones with Oracle Mobile Technology (General Session) Extend Oracle Applications to Mobile Devices with Oracle’s Mobile Technologies (General Session) Building Mobile Applications with Oracle Cloud (General Session) Mobile-Enable Oracle Fusion Middleware and Enterprise Applications with Oracle ADF (Conference Session) Co-presented with Infosys, an ADF Mobile Beta Partner Develop On-Device iPhone and iPad Apps Without Writing Any Objective-C Code (Oracle Develop Session) Mobile Apps for Oracle E-Business Suite with Oracle ADF Mobile and Oracle SOA Suite (Conference Session) Developing Applications for Mobile iOS and Android Devices with Oracle ADF Mobile (Hands on Lab) This lab was repeated 8 (!) times Build Mobile Applications for Oracle E-business Suite (Hands on Lab) It was an extremely busy Open World for the team, and we were in the middle of trying to release ADF Mobile!   By far, the most memorable event during Open World was the ADF Meett Up at the OTN Lounge, where beers were flowing (for a little while) and familiar names are finally matched with faces.  We also appreciate the opportunity to interview the attendees from New Caledonia - sorry we probably surprised you with the video record, and many thanks for coming through for us. I also want to thank my fellow ADF Mobile and Fusion Middleware team members - from product managers, engineers, and product marketing, everyone worked extremely hard to make this Open World a great success for ADF Mobile. I really enjoyed meeting everyone at Oracle Open World, at the booth, sessions, etc.   Now it's on to release ADF Mobile - for real! Thanks, Joe Huang PS: If this thread shows up on your RSS feed, please keep watching...

  Read the article

• Broken package after update: linux-headers, error brokencount >0

  - by escozul

  Ubuntu 12.04. After an update, I get a red warning icon in the system tray, warning about an error: broken count 0 Opening Update manager, I see that the broken package is linux-headers-3.2.0-33-generic-pae (new install) Specificaly I have my ubuntu on an AspireOne with 8gb internal storage. I tried apt-get clean as suggested in another question on this site, and tried reinstalling the package in Synaptic. I have tried to reboot but to no avail. I have also tried apt-get install --fix-broken and I get the following: sudo apt-get install --fix-broken [sudo] password for elina: Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: linux-headers-3.2.0-33-generic-pae The following NEW packages will be installed: linux-headers-3.2.0-33-generic-pae 0 upgraded, 1 newly installed, 0 to remove and 38 not upgraded. 1 not fully installed or removed. Need to get 0 B/977 kB of archives. After this operation 11,3 MB of additional disk space will be used. Do you want to continue [Y/n]; y (Reading database ... 437051 files and directories currently installed.) Unpacking linux-headers-3.2.0-33-generic-pae (from .../linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb) ... dpkg: error processing /var/cache/apt/archives/linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb (--unpack): unable to create `/usr/src/linux-headers-3.2.0-33-generic-pae/include/config/usb/gspca/sonixb.h.dpkg-new' (while processing `./usr/src/linux-headers-3.2.0-33-generic-pae/include/config/usb/gspca/sonixb.h'): No space left on device No apport report written because the error message indicates a disk full error dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I've tried all suggestions I could find: sudo apt-get clean sudo apt-get autoclean sudo apt-get autoremove sudo apt-get update sudo apt-get upgrade sudo apt-get -f install sudo apt-get install --fix-broken Then I saw that on the error there was a mention about free space. So I did a df -h and the result was: Filesystem Size Used Avail Use% Mounted on /dev/sda1 7,0G 5,5G 1,1G 84% / udev 235M 4,0K 235M 1% /dev tmpfs 97M 816K 96M 1% /run none 5,0M 0 5,0M 0% /run/lock none 242M 352K 242M 1% /run/shm I see that on my root folder I have 1.1Gb free. The broken package is linux-headers-3.2.0-33-generic-pae_3.2.0-33.52_i386.deb which only takes up 11.3Mb on my hard drive. I'm soooo lost. I really hope there is something I'm missing here. I don't want to go about reformatting this bucket. It's really not worth the time. Any help for fixing this would be hot.

  Read the article

• How do I prevent having to log in on 3 separate prompts every time I start my machine?

  - by JC

  Ubuntu 11.04 Natty Narwhal, Ubuntu Classic desktop Each time I start my machine, I have to log in 3 times. I spent a week in IRCFreenode#ubuntu and got nothing but condescension. I've searched on the official Ubuntu fora for similar problems, tried every recommendation, and still get 3 login screens. As a workaround, I have reset login such that I get a login screen at startup, which I'd prefer not to get since this machine is accessible by no one but me, physically. I have gone into System Preferences Passwords and Encryption Keys, set first 'Passwords: default' to 'Default' and unlocked it, and unlocked the 'Passwords: login' key, too. Next, since that changed nothing, I set 'Passwords: login' to 'Default', and checked to make sure it was still unlocked. Again, no change, still get 3 login prompts at startup. I've checked twice to insure that I am the owner of the files; I am. At the suggestion of several people in #ubuntu, I've deleted first one, then the other password key in 'Passwords and Encryption Keys'. Still get 3 login prompts. I changed from the Unity desktop to Ubuntu Classic. While that didn't fix the above problem, it is a much more elegant desktop than Unity, and I'll keep it. From what I've read, this seems to be a Seahorse issue, but beyond that, no one seems to have a solution that works. I'm lost. This shouldn't be this difficult or annoying. I'm trying to help our local Old Time music collective get their machines switched over to Ubuntu in order to save them some money which they can use to promote their DRM-free music. But from what I've seen of Ubuntu so far on my own machine, I can't really recommend that they make this switch. I hope to be proved wrong on that point. But as it stands, if I was out of town or out of country and they ran into a problem, they'd have no way of fixing it as they're all less experienced than even I am. I'm not trying to cast aspersions on Ubuntu or Linux, but it seems pretty clear that KNOWLEDGEABLE, HELPFUL support for Ubuntu is lacking barring any desire on the problem-experiencing-user's part to avoid condescension. Having worked with, and run, several non-profits over the past 20 years, I know that getting volunteers to act professionally can be like herding cats. But an organization's reputation can be denigrated by sarcastic behaviors on the part of those who serve, effectively, as its public face. Thank you all for your help and support. Now...does anyone have a solution to my problem?

  Read the article

• Five Best Practices for Going Mobile

  - by kellsey.ruppel

  76% of IT decision makers indicate mobile trends will have a high to extremely high impact on their organization. Has your organization gone mobile? Looking for some ideas on how to get started? John Brunswick shares his Best Practices for Going Mobile. Mobile technology has gone from nice-to-have to a cornerstone of user engagement. Mobile access enables social networking, decision support, purchasing, content consumption, and location-based searching, extending experiences beyond what is available in traditional desktop computing.  Organizations rushing to ensure their brand's mobile availability may have taken a tactical approach to implementation, but strategically approaching mobile can enable greater returns on a similar investment and subsequent mobile projects. Here are some strategic considerations for delivering products, services, and information to mobile constituents.  Who, Why, and What? Ask yourself these key questions: who are you attempting to engage through the channel, and why are they engaging you through this channel? What experience will satisfy their needs? What outcome will support your core business? Will you be informing and/or transacting with this person?  Mobile Behavior. Mobile users generally engage for a very specific purpose. Ensure that access to information, services, and products is streamlined. Arriving on a mobile site through search only to be asked to search again frustrates users.  Mobile Is Broad. After establishing the audience and goal, review technology requirements to support them. Do you need a mobile Website, native mobile application, or both? Do you need to support multiple devices? Know the difference between native mobile and mobile Web.  Social Strategy. Users are more likely to trust reviews from peers than marketing information from a vendor. If you are selling products or services, be sure to make social integration part of your strategy.  Content Management. Consider a shared content platform strategy for Web and mobile projects. Fresh, consistent content is important for high-quality experiences. Read more from John Brunswick.We'll also be talking mobile strategies and how you can transform your portal experience and optimize online engagement -- making your portals more interactive and more engaging across multiple channels in a webcast tomorrow. We hope you'll join us!

  Read the article

• MOSS 2007 WSP Retraction 'Error"

  - by juanlarios

  This one is a quick post , but I thought I would post this information as I could not find anything that helped me on this specific scenario. Please read the entire article before taking action as there are some irreversable or very troublesome routes I caution about! Problem: I had a client trying to retract a WSP from Central Admin and would eventually go to an, 'Error' State. I could not retract it and after looking at event logs I figured it was a problem with security. I tried several accounts, checked the databases to see if there was some issue with readonly databases and nothing was working.   Solution: Delete the solution from central admin! Yes, I said it. With StsAdm , just delete the solution from Central Admin using this command: "C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.exe" -o deletesolution -name "yoursolution.wsp" What has just happened is that Central Admin does not know about the WSP anymore but the feature and any deployed files are still on the server. For whatever reason SharePoint was not able to retract the files as it normally does. Now you can do one of two things, you can add the solution again to central admin and deploy overtop of the deployed files so it overrides them, or simply clean up the files manually. I re-added the solution through stsadm, but then deployed through stsadm using the -force option in the command. This overrides the existing files on the server. If you deploy through Central admin it will tell you you need the -force option that is not offered as part of the UI in central admin. Use the following command: "C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\BIN\STSADM.exe" -o deploysolution -name "YourSolution.wsp" -immediate -allowgacdeployment -force Just to make sure everything was good, I retracted to solution again, and it worked! then I deleted the solution from central admin alltogether. Then I checked the server and noticed all the files that were deployed with the WSP were cleaned up properly. I then re-added the new WSP the client was looking to install (an Updated WSP). Conclusion: I have no idea why it was not able to retract, but I have seen this several times. I don't know if has to do with security of certain accounts. Althought it's anoying at times, it is fairly easy to fix if you have good instructions. Hope it helps you out!   ***WORD OF CAUTION - if you clean up the files manually you might want to uninstall the features through STSADM commands as SharePOint might still recognize the features that were deployed as the WSP. You might not want to get into the mess of deleting files that are still part of activated or installed Features. THis is why I suggest doing what I did.

  Read the article

• box2d resize bodies arround point

  - by philipp

  I have a compound object, consisting of a b2Body, vector-graphics and a list polygons which describe the b2body's shapes. This object has its own transformation matrix to centralize the storage of transformations. So far everything is working quiet fine, even scaling works, but not if i scale around a point. In the initialization phase of the object it is scaled around a point. This happens in this order: transform the main matrix transform the vector graphics and the polygons recreate the b2Body After this function ran, the shapes and all the graphics are exactly where they should be, BUT: after the first steps of the b2World the graphical stuff moves away from the body. When I ran the debugger I found out that the position of the body is 0/0 the red dot shows the center of scaling. the first image shows the basic setup and the second the final position of the graphics. This distance stays constant for the rest of the simulation. If I set the position via myBody.SetPosition( sx, sy ); the whole scenario just plays a bit more distant for the origin. Any Idea how to fix this? EDIT:: I came deeper down to the problem and it lies in the fact that i must not scale the transform matrix for the b2body shapes around the center, but set the b2body's position back to the point after scaling. But how can I calculate that point? EDIT 2 :: I came ever deeper down to it, even solved it, but this is a slow solution and i hope that there is somebody who understands what formula I need. assuming to have a set polygons relative to an origin as basis shapes for a b2body: scaling the whole object around a certain point is done in the following steps: i scale everything around the center except the polygons i create a clone of the polygons matrix i scale this clone around the point i calculate dx, dy as difference of clone.tx - original.tx and clone.ty - original.ty i scale the original polygon matrix NOT around the point i recreate the body i create the fixture i set the position of the body to dx and dy done! So what i an interested in is a formula for dx and dy without cloning matrices, scaling the clone around a point, getting dx and dy and finally scale the vertex matrix.

  Read the article

• New computer hangs on shutdown/reboot, how to troubleshoot?

  - by torbengb

  Summary: My machine hangs on shutdown/restart: all windows and the menu bar disappear but the desktop wallpaper remains, and it stays like that without disk activity forever (hours). It doesn't even show the shutdown screen (the one with the animated dots) where I could hit ESC and watch the shutdown text. How can I troubleshoot this? Details: I've just received a new nettop computer (Acer Aspire Revo 3700: CPU:Atom D525, GPU:Nvidia ION2). I've just made a clean install of Ubuntu 10.10 using the standard USB pendrive method. The machine boots okay and works OK including WLAN and audio, but the graphics are not OK. Ubuntu offered to install&activate the current recommended Nvidia driver, but the machine hangs on shutdown/restart which prevents the installation of the proper Nvidia driver. I have to cycle the power to reboot. I ran the Update Manager in the hope that the updates would fix the hang-up. At the end of the update-installation it asked to reboot - and got stuck just like before. I see no obvious cause of the freeze and I don't know if it's caused by graphics problems or anything else. The only USB attachment is a mouse/keyboard; I don't have any external storage attached; and I don't have any programs running (the machine freezes even when doing restart right after login). How can I determine what is causing the freeze? How can I fix this? I'm frankly rather disappointed because I bought this new machine in the hopes of getting the graphics to work, which failed miserably on my old machine, even though Ubuntu is supposed to be good with Nvidia. Being a fresh convert from Windows, I was hoping for a happier experience this time, so I'm very much looking forward to your suggestions! ... After posting this question, I see related questions in the right sidebar: this, this, and this. Don't know why these didn't show up while I composed by question. Those questions suggest some ACPI settings but I am not experienced enough to find/change those settings. I'll try the sudo shutdown -h now command when I get home and see if that works, then update this question. I did check the system BIOS but didn't see anything out of the ordinary.

  Read the article

• Error installing RVM

  - by Dbugger

  I am following this guide, but this is the output I receive. What am the problem? dbugger@mercury:~$ \curl -sSL https://get.rvm.io | bash -s stable --rails Downloading https://github.com/wayneeseguin/rvm/archive/stable.tar.gz Upgrading the RVM installation in /home/dbugger/.rvm/ RVM PATH line found in /home/dbugger/.profile /home/dbugger/.bashrc /home/dbugger/.zshrc. RVM sourcing line found in /home/dbugger/.bash_profile /home/dbugger/.zlogin. Upgrade of RVM in /home/dbugger/.rvm/ is complete. # Enrique, # # Thank you for using RVM! # We sincerely hope that RVM helps to make your life easier and more enjoyable!!! # # ~Wayne, Michal & team. In case of problems: http://rvm.io/help and https://twitter.com/rvm_io Upgrade Notes: * No new notes to display. rvm 1.25.27 (stable) by Wayne E. Seguin <[email protected]>, Michal Papis <[email protected]> [https://rvm.io/] Searching for binary rubies, this might take some time. No binary rubies available for: ubuntu/14.04/x86_64/ruby-2.1.2. Continuing with compilation. Please read 'rvm help mount' to get more information on binary rubies. Checking requirements for ubuntu. Installing requirements for ubuntu. Updating system.......... Installing required packages: gawk, libreadline6-dev, libssl-dev, libyaml-dev, libsqlite3-dev, sqlite3.... Error running 'requirements_debian_libs_install gawk libreadline6-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3', showing last 15 lines of /home/dbugger/.rvm/log/1401804140_ruby-2.1.2/package_install_gawk_libreadline6-dev_libssl-dev_libyaml-dev_libsqlite3-dev_sqlite3.log ++ /scripts/functions/utility : __rvm_try_sudo() 405 > sudo -p '%p password required for '\''apt-get --no-install-recommends --yes install gawk libreadline6-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3'\'': ' apt-get --no-install-recommends --yes install gawk libreadline6-dev libssl-dev libyaml-dev libsqlite3-dev sqlite3 Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libssl-dev : Depends: libssl1.0.0 (= 1.0.1f-1ubuntu2) but 1.0.1f-1ubuntu2.1 is to be installed E: Unable to correct problems, you have held broken packages. ++ /scripts/functions/utility : __rvm_try_sudo() 405 > return 100 ++ /scripts/functions/requirements/ubuntu : requirements_debian_libs_install() 36 > return 100 Requirements installation failed with status: 100.

  Read the article

• The Case of the Missing Date/Time Stamp: Reporting Services 2008 R2 Snapshots

  - by smisner

  This week I stumbled upon an undocumented “feature” in SQL Server 2008 R2 Reporting Services as I was preparing a demonstration on how to set up and use report snapshots. If you’re familiar with the main changes in this latest release of Reporting Services, you probably already know that Report Manager got a facelift this time around. Although this facelift was generally a good thing, one of the casualties – in my opinion – is the loss of the snapshot label that served two purposes… First, it flagged the report as a snapshot. Second, it let you know when that snapshot was created. As part of my standard operating procedure when demonstrating report snapshots, I point out this label, so I was rather taken aback when I didn’t see it in the demonstration I was preparing. It sort of upset my routine, and I’m rather partial to my routines. I thought perhaps I wasn’t looking in the right place and changed Report Manager from Tile View to Detail View, but no – that label was still missing. In the grand scheme of life, it’s not an earth-shattering change, but you’ll have to look at the Modified Date in Details View to know when the snapshot was run. Or hope that the report developer included a textbox to show the execution time in the report. (Hint: this is a good time to add this to your list of report development best practices, whether a report gets set up as a report snapshot or not!) A snapshot from the past In case you don’t remember how a snapshot appeared in Report Manager back in the old days (of SQL Server 2008 and earlier), here’s an image I snagged from my Reporting Services 2008 Step by Step manuscript: A snapshot in the present A report server running in SharePoint integrated mode had no such label. There you had to rely on the Report Modified date-time stamp to know the snapshot execution time. So I guess all platforms are now consistent. Here’s a screenshot of Report Manager in the 2008 R2 version. One of these is a snapshot and the rest execute on demand. Can you tell which is the snapshot? Consider descriptions as an alternative So my report snapshot demonstration has one less step, and I’ll need to edit the Denali version of the Step by Step book. Things are simpler this way, but I sure wish we had an easier way to identify the execution methods of the reports. Consider using the description field to alert users that the report is a snapshot. It might save you a few questions about why the data isn’t up-to-date if the users know that something changed in the source of the report. Notice that the full description doesn’t display in Tile View, so keep it short and sweet or instruct users to open Details View to see the entire description.

  Read the article

• Need help with a complex 3d scene (using Ogre and bullet)

  - by Matthias

  In my setup there is a box with a hole on one side, and a freely movable "stick" (or bar, tube). This stick can be inserted/moved through the hole into the box. This hole is exactly as wide as the diameter of the stick. In reality, when you would now hold the end of the stick in your hand and move the hand left/right or up/down, the other end of the stick, which is inside the box, would move into the opposite direction of your hand movement (because the stick is affixed at the pivot point where it is entering the box through the hole). (I hope you understand what I mean so far.) Now I need to simulate such a setup in a 3d program. I have already successfully developed an Ogre3d framework for this application, including bullet. But what I don't know is how I can implement in my program what I have described above. This application must include two more features: The scene camera is attached to the end of the stick that is inserted into the box. So when the user would move the mouse (to control "his" end of the stick outside the box), then the camera attached to the stick would move in the opposite direction, as described above. The stick has some length, and the user can push it further into the box, or pull it closer to him again. That means of course that the max. radius on which the end of the stick inside the box can move depends on how far the stick is pushed into the box. Thus, the more the stick is pushed into the box, the larger the max. radius of this end of the stick with the camera will be. I understand this is maybe quite a complex thing, so I don't expect any real source code here. I already have the Ogre and bullet part as said up and running, as well as a camera attached to the stick. This works fine. What I don't know though is how I can simulate the setup described above. Especially the requirement that the stick is affixed at the position of the hole on the box, where it is inserted into the box. Any ideas how I could approach to implement the described setup?

  Read the article

• Northwind now available on SQL Azure

  - by jamiet

  Two weeks ago I made available a copy of [AdventureWorks2012] on SQL Azure and published credentials so that anyone from the SQL community could connect up and experience SQL Azure, probably for the first time. One of the (somewhat) popular requests thereafter was to make the venerable Northwind database available too so I am pleased to say that as of right now, Northwind is up there too. You will notice immediately that all of the Northwind tables (and the stored procedures and views too) have been moved into a schema called [Northwind] – this was so that they could be easily differentiated from the existing [AdventureWorks2012] objects. I used an SQL Server Data Tools (SSDT) project to publish the schema and data up to this SQL Azure database; if you are at all interested in poking around that SSDT project then I have made it available on Codeplex for your convenience under the MS-PL license – go and get it from https://northwindssdt.codeplex.com/. Using SSDT proved particularly useful as it alerted me to some aspects of Northwind that were not compatible with SQL Azure, namely that five of the tables did not have clustered indexes: The beauty of using SSDT is that I am alerted to these issues before I even attempt a connection to SQL Azure. Pretty cool, no? Fixing this situation was of course very easy, I simply changed the following primary keys from being nonclustered to clustered: [PK_Region] [PK_CustomerDemographics] [PK_EmployeeTerritories] [PK_Territories] [PK_CustomerCustomerDemo]   If you want to connect up then here are the credentials that you will need: Server mhknbn2kdz.database.windows.net Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly You will need SQL Server Management Studio (SSMS) 2008R2 installed in order to connect or alternatively simply use this handy website: https://mhknbn2kdz.database.windows.net which provides a web interface to a SQL Azure server. Do remember that hosting this database is not free so if you find that you are making use of it please help to keep it available by visiting Paypal and donating any amount at all to [email protected]. To make this easy you can simply hit this link and the details will be completed for you – all you have to do is login and hit the “Send” button. If you are already a PayPal member then it should take you all of about 20 seconds! I hope this is useful to some of you folks out there. Don’t forget that we also have more data up there than in the conventional [AdventureWorks2012], read more at Big AdventureWorks2012. @Jamiet  AdventureWorks on Azure - Provided by the SQL Server community, for the SQL Server community!

  Read the article

• Pro SharePoint 2010 Business Intelligence Solutions

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Oh yeah baby, it’s out finally! This book is what I wanted to write for so long now, but never really got a chance to. For SharePoint 2007, I authored the SharePoint section of “Smart BI Solutions with SQL Server 2008” for MS Press. But never really got the time, to author a full book that this topic deserved. Until SharePoint 2010, we actually have a full book on this topic. So first things first, I didn’t actually write it. My role was limited to the overall concept, the outline, the layout, completion of it, code samples, identifying what we need in here, vouching for technical accuracy, identifying authors etc. The real work was done by Srini (5 chapters), and Steve (1 chapter). So credit given where it is due. But, with that said, this is a pretty good book. It has always been a challenge to find the superman that knows both, data ware housing concepts, and SharePoint concepts. The data ware housing concepts include basic stuff you need to know to work in the BI area such as cubes, MDX queries, etc. So chapter 1 covers that – and if you’re a hardcore DBA, feel free to skip Chapter 1. Then beyond that, we take every single SharePoint 2010 BI topic, and slice and dice it in detail. The topics we deal with are - Visio Services Reporting services Business Connectivity Services Excel Services PerformancePoint Services And in covering each of these topics, we ensure that a general layout was followed for each topic, to ensure completeness of content. We make sure we cover Setup related issues and advice Point and click usage Code usage, i.e. extensibility using visual studio and a walkthrough of the administration side of things, including powershell. (Yes, I insisted on that in being there in every chapter). Writing a book is always a lot of work, so we hope you find it useful. And it should go very well with the other book I just reviewed, which is Microsoft ADO.NET 4, step by step. Comment on the article ....

  Read the article

• SharePoint 2010 Hosting :: How to Create an External Content Type SharePoint 2010

  - by mbridge

  In this simple Article trying to show how SharePoint Designer 2010 more the External Content Type to External Database are very easy to create and can be integrated with our SharePoint Portals. You can download SharePoint Designer 2010 here: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d88a1505-849b-4587-b854-a7054ee28d66&displaylang=en For this Example I will create a Database in SQL Server and will use SharePoint Designer 2010 to create the connections and use as a mirror from our SharePoint Portal using List and the Database. The first thing we need to do, is connect to SQL Server and create our Database call “Contacts” and add the Table “Contact” with the following fields.  When we create the External Content Type. We  will need to associate the Content Type, in this case i am using the Generic List, then we can create the Connection to the external Data Source. After create the Connection to the Database we can define what Columns we will use and what operations we will add our custom List. For this example i select all Operation they came default. This operation are very important because the Business rules are defined in each operation. After we create the diferent operations we can create the Custom List and define the how will be the Operation and add the Name for our custom List.  If you try to access the New Custom List Call “Custom Contact” you will see we will not have access to the Business Data Connectivity. To Resolve this issue we will need to give Access and permissions to users to the Custom External Content Type BDC connection in the Central administration.  Access to Central Administration Page and select the option “Service Application Tab> Manage Service Application”. There you select the Service “Business Data Connectivity Service” then select “Manage”.  This Option will list all External Content Type, choose the External Content Type we create and select the option “Set Object Permission”, this option will allow to add users to the BDC and manage the permissions to the Custom List.  After the correct permissions are given we can Access to Data on our custom Contact List and start creating new Item and all the other options and operation we define to the same List.  Hope you like this litle Article about connect Database Content to SharePoint Portal using the Externa Content Types and BCS.Thank you.

  Read the article

• Oracle OpenWorld Call for MDM Papers

  - by david.butler(at)oracle.com

  As the MDM Track owner, I would like to invite everyone to respond to the Oracle OpenWorld (October 2-6, Moscone Center, San Francisco) Call for Papers (https://oracleus.wingateweb.com/portal/cfp/ ). The Call for Papers is open now through Sunday, March 27. This is an outstanding opportunity for organizations familiar with MDM to tell their story to a very large, knowledgeable and intensely interested community. Opportunities for feedback and networking abound.  I would love to see MDM papers on: business drivers; business benefits; quantified ROI stories; business process optimization; implementation styles; implementation lessons learned; using master data as a service; data governance best practices; end-to-end data quality experiences; support for SOA; Chart of Accounts issues fixed; how to leverage reference data; improving EPM and/or BI across the board; operationalizing a data warehouse; support for cloud computing; compliance success stories; architecture, scalability, and mixed workload RAC platform performance examples; industry specific value propositions (Financial Services; Retail, Telecom; Manufacturing, High Tech Manufacturing, Public Sector, Health Care, …); and line of business specific value propositions (CRM, ERP, PLM, SCM, …); etc. In fact, given that MDM positively impacts all areas of operations and analytics, there are no limits to the ideas you may have for an OpenWorld presentation. When you follow the submission process, be sure to use “Master Data Management” for either the Primary or Optional track. Add “Master Data Management” as an Optional track if you are adding MDM content to a presentation on one of the following tracks: Agile; Customer Relationship Management, Oracle E-Business Suite, Product Lifecycle Management, Siebel, Sourcing and Procurement, Supply Chain Management, or one of the 18 available industry tracks. If Cloud Computing is included, please add “Cloud Computing” as a Cross-Stream Track. And don’t forget to make “MDM” a Tag, along with Business Intelligence, Cloud, CRM, Data Integration, Data Migration, Data Warehousing, EPM, or Service-Oriented Architecture whenever your content includes these items. I will personally review each submission. I hope you all keep me very busy over the next few weeks.

  Read the article

• #SSAS #Tabular Workshop and Community Events in Netherlands and Denmark

  - by Marco Russo (SQLBI)

  Next week I will finally start the roadshow of the SSAS Tabular Workshop, a 2-day seminar about the new BISM Tabular model for Analysis Services that has been introduced in SQL Server 2012. During these roadshows, we always try to arrange some speeches at local community events in the evening - we already defined for Copenhagen, we have some logistic issue in Amsterdam that we're trying to solve. Here is the timetable: Netherlands SSAS Workshop in Amsterdam, NL – April 16-17, 2012 2-day seminar, I and Alberto will be the trainers for this event, register here We're trying to manage a Community event but we still don't have a confirmation, stay tuned        Denmark SSAS Workshop in Copenhagen, DK – April 26-27, 2012 2-day seminar, I and Alberto will be the trainers for this event, register here Community event on April 26, 2012 This event will run in Hellerup, at Microsoft venue All details available here: http://msbip.dk/events/26/msbip-mode-nr-5/ People from Sweden are welcome! Just register to this private group on LinkedIn in order to announce your presence, so we’ll know how many people will attend In community events we’ll deliver two speeches – here are the descriptions: Inside xVelocity (VertiPaq) PowerPivot and BISM Tabular models in Analysis Services share a great columnar-based database engine called xVelocity in-memory analytics engine (VertiPaq). If you want to improve performance and optimize memory used, you have to understand some basic principles about how this engine works, how data is compressed, and how you can design a data model for better optimization. Prepare yourself to change your mind. xVelocity optimization techniques might seem counterintuitive and are absolutely different than OLAP and SQL ones! Choosing between Tabular and Multidimensional You have a new project and you have to make an important decision upfront. Should you use Tabular or Multidimensional? It is not easy to answer, because sometime there is a clear choice, but most of the times both decisions might be correct, at least at the beginning. In this session we’ll help you making an informed decision, correctly evaluating pros and cons of each one according to common scenarios, considering both short-term and long-term consequences of your choice. I hope to meet many people in this first dates. We have many other events coming in May and June, including an online event (for US time zones), and you can also attend our PreCon Day at TechEd US in Orland (PRC06) or TechEd Europe in Amsterdam. I’ll be a good customer for airline companies in the next three months! I’m just sorry that I hadn’t time to write other articles in the last month, but I’m accumulating material that I will need to write down during some flight – stay tuned…

  Read the article

• Ubuntu Server and setting up two nic cards

  - by kmalik

  I have ubuntu server on a computer with a wireless and hardwired nic card. The wireless needs to get the internet and pass it to the ubuntu server as well as pass it along to the hardwired nic card to more computers. I am having issues getting the basic set up as I believe the route table is grabbing from the wrong nic card. The router is 192.168.1.0 and the server is set to 192.168.1.11 on the wireless card through DHCP ETH0 (wired nic card) is set up to be 10.10.10.0 and the server is 10.10.10.1) I am not a linux or networking guru but basically I am trying to have internet come from a guest network 192.168.1.0 i believe to give internet to the ubuntu server then the ubuntu server will also A) have the wired nic serve DHCP addresses to other computers via a switch or router (that acts as a switch) via 10.10.10.0 addresses. And I would love if it also passed along internet capabilities as well if possible. Bu really at this point my hope is to at least get the internet working on the server and the DHCP to pass correctly. At the moment the specific issue I am having is getting ubuntu server to connect to the internet and have both nic cards up and running correctly. Any help would be appreciated! The route table is as follows: Destination Gateway GM Flags Metric Iface 0.0.0.0 10.10.10.1 0.0.0.0 UG 100 eth0 10.10.10.0 0.0.0.0 255.255.255.0 U 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 eth0 1992.168.1.0 0.0.0.0 255.255.255.255.0 U 0 eth1 My interfaces is set up as follows: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.10.10.1 netmask 255.255.255.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.1 domain-name-servers 192.168.1.0 auto eth1 iface eth1 inet dhcp netmask 255.255.255.0 gateway 192.168.1.0 wpa-driver wext wpa-ssid "ssid_name" wpa-ap-scan 1 wpa-proto wpa wpa-pairwise ccmp wpa-group ccmp wpa-key-mgmt wpa-psk wpa-psk "HASH" My DHCPD.conf (as there is a domain name server on here is as follows): ddns-update-style none default-lease-time 600 max-lease-time 7200 authoritative option domain-name "Kamron's Network" option subnet-mask 255.255.255.0 option broadcast-address 10.10.10.255 option routers 192.168.1.0 option domain-name-server 192.168.1.0 98.223.128.213 ooption subnet 10.10.10.0 netmask 255.255.255.0 { range 10.10.10.10 10.10.10.99 } log-facility local7

  Read the article

• Using multiple diagrams per model in Entity Framework 5.0

  - by nikolaosk

  I have downloaded .Net framework 4.5 and Visual Studio 2012 since it was released to MSDN subscribers on the 15th of August.For people that do not know about that yet please have a look at Jason Zander's excellent blog post .Since then I have been investigating the many new features that have been introduced in this release.In this post I will be looking into theIn order to follow along this post you must have Visual Studio 2012 and .Net Framework 4.5 installed in your machine.Download and install VS 20120 using this link.My machine runs on Windows 8 and Visual Studio 2012 works just fine. I have also installed in my machine SQL Server 2012 developer edition. I have also downloaded and installed AdventureWorksLT2012 database.You can download this database from the codeplex website.   Before I start showcasing the demo I want to say that I strongly believe that Entity Framework is maturing really fast and now at version 5.0 can be used as your data access layer in all your .Net projects.I have posted extensively about Entity Framework in my blog.Please find all the EF related posts here. In this demo I will show you how to split an entity model into multiple diagrams using the new enhanced EF designer. We will not build an application in this demo.Sometimes our model can become too large to edit or view.In earlier versions we could only have one diagram per EDMX file.In EF 5.0 we can split the model into more diagrams.1) Launch VS 2012. Express edition will work fine.2) Create a New Project. From the available templates choose a Web Forms application  3) Add a new item in your project, an ADO.Net Entity Data Model. I have named it AdventureWorksLT.edmx.Then we will create the model from the database and click Next.Create a new connection by specifying the SQL Server instance and the database name and click OK.Then click Next in the wizard.In the next screen of the wizard select all the tables from the database and hit Finish.4) It will take a while for our .edmx diagram to be created. When I select an Entity (e.g Customer) from my diagram and right click on it,a new option appears "Move to new Diagram".Make sure you have the Model Browser window open.Have a look at the picture below 5) When we do that a new diagram is created and our new Entity is moved there.Have a look at the picture below  6) We can also right-click and include the related entities. Have a look at the picture below. 7) When we do that the related entities are copied to the new diagram.Have a look at the picture below  8) Now we can cut (CTRL+X) the entities from Diagram2 and paste them back to Diagram1.9) Finally another great enhancement of the EF 5.0 designer is that you can change colors in the various entities that make up the model.Select the entities you want to change color, then in the Properties window choose the color of your choice. Have a look at the picture below. To recap we have demonstrated how to split your entity model in multiple diagrams which comes handy in EF models that have a large number of entities in them Hope it helps!!!!

  Read the article

• Sharing one static ip for both ftp and www service

  - by user11496

  Trying to figure out how to update the Zone record and configure webserver so that one application on the webserver is accessible by public. I'm completely not good at NS/DNS/NAT/firewall/routing/port forwarding/networking etc. "faraday" is the intranet name. Everyone within local network can access all applications hosted on "faraday". Hostname for webserver is "www", FTP server is "ftpserver". Both servers running RHEL4 OS. The goal is to allow anyone outside the company network (public) to access only one of the many applications on "faraday". Hope somebody can help me with some of the questions below, if not all. From zoneedit record, the static IP is used by FTP now. Can I use the same existing static IP - 219.95.10.100, for web service? Currently anyone who enter "http://www.abc.com.my" will be directed to "http://www.abc.com". I don't want this to change. Currently, no one else, except employee on local network, can access "faraday" web pages. How to configure so that when anyone type "http://thisapp.abc.com.my" on their web browser, the url will lead them to "http://faraday/thisapp" (application folder is /var/www/html/thisapp on RHEL4 web server). If possible, how to set the URL will continue to show "http://thisapp.abc.com.my" instead of "http://faraday/thisapp" How to limit/restrict user (those who are not from local network) so they only have access to "http://thisapp.abc.com.my", but not "http://faraday" or "http://faraday/anotherapp", etc. What's the configuration changes needed in /etc/httpd.conf on web server? Company domain name is "abc.com.my". Following is the zone records on www.zoneedit.com. Subdomain Type IP sdsl A 219.95.10.100 ftp CNAME sdsl.abc.com.my @ NS ns3.zoneedit.com @ NS ns7.zoneedit.com WebForward record: New Domain Destination Cloaked www.abc.com.my http://www.abc.com N On my local DNS server, there are 2 zone files: abc.com.my and pnmy.abc.com. > cat abc.com.my.zone ftp CNAME ftp.pnmy.abc.com. sdsl A 219.95.10.100 > cat pnmy.abc.com.zone ftp CNAME ftpserver ftpserver A 172.16.5.1 faraday CNAME www www A 172.16.5.2

  Read the article

• Guiding Management to the Correct Decision

  - by Blumer

  My supervisor (also a developer) and I have a running joke about writing a book called "Managing From Beneath: Subversively Guiding Management to the Right Decision" and including a number of "techniques" we've developed for helping those who make the decisions to make the right ones. So far, we've got (cynicism warning!): BIC It! BIC stands for "Bury In Committee." When a bad idea comes up that someone wants to champion, we try to get it deferred to a committee for input. Typically it will either get killed outright (especially if other members of the committee are competing for you as a resource), or it will be hung up long enough that the proponent forgets about it. Smart, Stupid, or Expensive? When someone gets a visionary idea, offer them three ways to do it: a smart way, a stupid way, and an expensive way. The hope is that you've at least got a 2/3 shot of not having to do it the way that makes a piece of your soul die. All-Pro. It's a preemptive pro/con list in which you get into the mind of the (pr)opponent and think what would be cons against doing it your way. Twist them into pros and present them in your pro list before they have a chance to present them as cons. Dependicitis. Link pending decisions together, ideally with the proponent's pet project as the final link in the chain. Use this leverage to force action on those that have been put off. Preemptive Acceptance. Sometimes it's clear that management is going to go a particular direction regardless of advice to the contrary, and it's time to make the best of it. Take the opportunity to get something else you need, though. Approach the sponsor out of the blue and take the first step: "You know, I've been thinking about it, and while it's not the route I would advise, as long as we can get the schedule and budget for Project Awesome loosened up, I can work some magic to make your project fly." So ... what techniques have you come up with to try to head off the problem projects or make the best of what may come?

  Read the article

• Stuff I learned at Innovate 2011

  - by David Dorf

  After returning from the NRF Innovate 2011 conference, I picked up few nuggets I thought I'd share here.  These thoughts are a bit random, but I hope they're useful nonetheless.Kevin Kelly opened the conference with six verbs that represent the future.  They were Screening, Interacting, Sharing, Accessing, Flowing, and Generating.  It struck me that these are all ways in which we merge the digital and physical worlds.  The internet of things continues to gain momentum.Some buzzwords:  deal economy, subscription commerce, discovery (instead of search), curationThat last one, curation, came up over and over.  Retailers, especially those in fashion, are finding value in helping their customers organize and present their own collections.  Social media has made sharing such collections easy, and mobile lets them take those ideas into the stores.  Mannequins are becoming less relevant.I heard from both HauteLook and Gilt Groupe (flash sale retailers) that a large percentage of their visits come from mobile devices, and most of those are iOS devices.  I find it interesting that even though Android has passed iPhone in units shipped (and will eventually pass iOS as a whole), its still the Apple crowd that leads the way.RadioShack mentioned their Holiday Heroes campaigned was very successful.  They asked their Foursquare users to check-in at a gym, coffee shop, and transportation hub as part of being a hero.  For this feat, customers were awarded a special badge that was worth 20% off at their next store visit. They claim a 3.5x increase in ticket size vs. regular check-in customers, and a 5x increase vs those that don't check-in at all.I also learned of RadioShack's #28 campaign, which is apparently one of the largest Twitter trends ever.  Their partnership with LIVESTRONG has gotten them followers, impressions, and credit for supporting the fight against cancer.The guys at Invodo showed the importance of video to e-commerce.  They gave compelling examples of how video can show customers the value of products better than just words.The highlight of the show was Guy Kawasaki's talk on innovation, which was not only informative but also peppered with humor and personality.  Back in the early days of the internet boom, Guy turned down the CEO position at Yahoo! because the commute was too long.  By his calculation, that was a $2B mistake.There are other good accounts of the conference at the NRF Blog.

  Read the article

• Reduce weight in healthy way - Day 2

  - by krnites

  My second day of reducing weight and it seems most of the blog are correct in saying that you can reduce weight if your calorie consumption is less than what you burn. In one day I have lost 1 lbs without doing anything. My current weight is 177.4 lbs. Yesterday I ate small portion of dinner that I used to eat that also around 7 PM. Normally I eat my dinner around 10 PM and withing 2 hour of eating I go for sleep, but yesterday I ate around 7 PM and went for sleep only after 12.On my second day I have eaten noodles and 3 eggs in breakfast and sesame chicken ( I love it) and fried rice in lunch, I still have not gone for running but had plan to go for running and then swimming. I hope it will at least burn the calories that I had taken. On some site it was written that a normal men body needs around 2000 Calorie a day. So if I am eating less than 2000 calorie ( noodles + 3 eggs = 400+200, rice + sesame chicken = 1300, total = 1900) and burning around 300 calorie, my total calorie intake will be 1600 which is less than what my body needs. So most probably by tomorrow I should come under 176 lb bracket.Apart from counting the calorie that I am taking in everyday and approx number of calorie that I am burning everyday, I had also starting tracking my physical activities on my mobile. I have got a beautiful Samsung Focus S Windows 7.5 mobile. And after browsing through the market I have downloaded couple of health Apps.1. 6 Week training - this has set of exercise and lets you choose the number of sets you want to do for all exercise. Its focus on your core muscles.2. Fast food Calories - This apps has all the fast food chain listed and give the calorie count of each of the food item available on there menu. Like for Burger King's French Fries Large (Salted) contains 500 Calorie.3. Gym Pocket Guide - Contains instructions for different kind of exercise and tells a right way of doing them.4.  RunSat - kind of GPS based application. Its mark the distance you have run, shows the path you have taken on a map, total calorie burnt, laps completed. I love this apps.5. Stop Watch I also have noticed that If I am running in GYM and have television in front of me where a movie or serial is going on which I like,  I normally didn't notice the time. Most of the time running on treadmill is very boring, but if some music video is playing or some kind of sitcom is going, I can run for  a hour or half.So on day 2 I have lost 1 lbs and had learnt that calorie intake should be less then calorie burnt for a given day.

  Read the article

• How to run a local and external website on same computer with 2 NIC's, 2 Routers and 3 seperate networks?

  - by CandN

  Hello and hopefully I can get some answers to my question, though I think I'm making it more complicated for myself than it has to be. My business is a used auto dealership, and I'm in the process of connecting it to the world - via ethernet from the business server [running Xubuntu] to the ISP's ethernet router/modem, so that I can host our own website (no more than 5-10 people probably visiting at any time - mainly paying their bill), as well as set up a web based internal-intranet site - via DD-WRT Router on the 2nd NIC on the business server - that'll be accessed over Wifi from employees personal devices. On the other end of this is trying to offer free wifi to customers that is completely seperate of the 2 mentioned above networks. Quick Rundown: 1. Web Site for Customers to access. I'm going to use no-ip.org for DNS for the moment being, so I'll have a site that customers can access from anywhere in the world at "mybiz.no-ip.org". This will be forwarded to NIC #1 on the server, possibly at an address like "108.69.." as its being provided an IP from the ISP's modem/router, that is from Time Warner, and they allow NO! configuration options. Web Site for employees to access. I'm trying not to use the server too much as a desktop, only for critical situations, so having a backend thats seperate from the front-facing website is critical. This will be the DD-WRT router hardwired into NIC #2 on the server. This WiFi will be password accessible. Public WiFi for customers. The DD-WRT can seperate networks if I'm correct, I just can't seem to understand how to seperate the 2 and still have internet access on both. I've done it before, but the "Public" wifi (with no password set to connect) kept dropping the connection like a problem was happening that I couldn't figure out. So if I could do a little drawing, this is how it would/should possibly look. ISP -- [Sends Public Facing IP of 108.69.*.1/8] -- ISP Modem Router ISP Modem Router (Ethernet Only) -- [Gives Private IP 108.69.*.2] -- Server NIC #1 Server NIC #1 -- [Gives Private IP 108.69.*.3] -- DD-WRT Router DD-WRT Router -- [DHCP Enabled Giving IP's 172.16.0.0/16] -- Employees Network | | --------- [DHCP Enabled Giving IP's 192.168.1.0/24] -- Public WIFI Hope it's not too confusing, but it anyone could give me some good direct tutorials on how to accomplish this, or if YOU know, then it'll be alot of help. Thanks to all in advance. Need anything else to be explained? Don't hesitate to ask! *Using The LAMP stack with Webmin/VirtualMin -Customer site is located in /var/www2/ -Private Employees site is located in /var/www/ Using no-ip.org's dynamic client updater

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >